sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

25Latest Hollow punch Tenders List

Latest Hollow punch Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Hollow punch tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Hollow punch tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Hollow punch Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Hollow punch tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Hollow punch Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Hollow punch Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Hollow punch Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Hollow punch tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Hollow punch Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Hollow punch sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Hollow punch tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Hollow punch tenders.

Is EMD mandatory for all Hollow punch tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Hollow punch work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Hollow punch tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Hollow punch Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16812310
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for cut , file flat 300 mm second cut , file flat 200 mm bastard , file flat 300 mm bastard , file swiss type needle set of 12 , file half round 250 mm second cut , file half round 250 mm bastard , file round 250 mm bastard , file hand 150 mm second cut , file card wire brush , oil can 250 ml , plier combination insulated 150 mm , wooden handle forged soldering iron copper bit , blow lamp 500 ml , spanner double ended set of 8 pcs , spanner adjustable 150 mm , interchangeable ratchet socket set with 12 mm driver , double ended tubular box spanner set with tommy bar , glass magnifying 75 mm , clamp tool maker 50 mm , clamp tool maker 75 mm , c-clamp 100 mm , c-clamp 200 mm , reamer hand set pin taper straight flute , reamer machine parallel helical flute , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold 9 mm x150 mm cross cut , chisel cold 9 mm x 150 mm diamond , chisel cold flat 9 mm x 100 mm , chisel cold 9 mm x 100 mm round nose , drill chuck 12 mm with key , pipe wrench 400 mm , pipe vice 100 mm , adjustable pipe die set b.s.p , wheel dresser , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , sleeve drill morse , vice bench 150 mm jaw , bench working 2400 x 1200 x 900 mm , almirah 1800 x 900 x 450 mm , lockers with 12 drawers standard size , metal rack 1820 x 900 x 450 mm , instructor table , instructor chairs , black board with easel , fire extinguisher , fire buckets with stand , vice machine 100 mm jaw , wing compass 300 mm , hammer hand 1 kg. with handle , torque wrench 14 to 68 nm ratchet type , power tools for fastening capacity 10-18mm , different profile gauges plate type for demonstration , knurling tool diamond , knurling tool straight and diagonal , indexable boring bar with inserts , temperature gauge range , dowel pin straight , standard tap screws , lapping plate dia , metric drill gauge , letter drill gauge , number drill gauge , cast iron globe valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flat belt , v- belt and flat belt , washer, clutch, keys, jib, cotter and circlips , hollow punch , bearing different types , lifting sling , bearing extractor , pulley extractor , trammel 300 mm , punch prick , mallet , aviation snip straight cut 300 mm , hammer flat headed with handle , hammer planishing , snip bent left cut 250 mm , stake hatchet with leg , stake grooving , gauge slip metric as johnson set , gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs , gauge plug single ended 5 to 55 by 5 mm set of 11 piece , gauge telescopic 8 to 150 mm , dial test indicator on stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator gauge , engineer try square , surface roughness comparison , vernier bevel protractor , carbide wear block , lathe tools h.s.s. , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type with stand manually , adjustable pipe chain tong to take pipes , spanner adjustable , s.s. and s.c. centre lathe , drilling machine pillar sensitive , drilling machine bench sensitive , d.e. pedestal grinding machine , transformer welding set 300 amps , welding cable , lugs for cable , earth clamps , arc welding table , oxy- acetylene gas welding set , gas welding table with, lab of fitter trade, steel rule 150mm with metric and british graduation, try square 150mm blade, caliper inside 150mm spring, caliper 150mm hermaphrodite spring type, caliper outside 150mm spring, divider spring joint 150mm, scriber 150mm multiple 5mm, punch centre 120mm multiple 10mm, screw driver 150mm multiple 6mm, chisel cold flat 20mm multiple 150mm, hammer ball peen 450 gm, hammer ball peen220 gm, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles plain, punch dot 100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm, stud extractor, combination set 300 mm, micrometer outside 0 to 25 mm, micrometer outside 25 to 50 mm, micrometer outside 50 to 75 mm, micrometer inside with extension rods, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, surface plate 600 multiple 600 mm c.i. granite with stand and cover, marking table 900 multiple 900 multiple 900 mm mild steel, universal scribing block 220 mm, v-block pair 150 multiple 100 multiple 100 mm with clamp, angle plate 150 multiple 150 multiple 250 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 13 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, taps and dies complete set in a box, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, gauge feeler, file triangular 200 mm second cut, file flat 300 mm second cut, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card wire brush, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, blow lamp 500 ml, spanner double ended set of 8 pcs, spanner adjustable 150 mm, interchangeable ratchet socket set with 12 mm driver, double ended tubular box spanner set with tommy bar, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c-clamp 100 mm, c-clamp 200 mm, reamer hand set pin taper straight flute, reamer machine parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b.s.p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, almirah 1800 x 900 x 450 mm, lockers with 12 drawers standard size, metal rack 1820 x 900 x 450 mm, instructor table, instructor chairs, black board with easel, fire extinguisher, fire buckets with stand, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg. with handle, torque wrench 14 to 68 nm ratchet type, power tools for fastening capacity 10-18mm, different profile gauges plate type for demonstration, knurling tool diamond, knurling tool straight and diagonal, indexable boring bar with inserts, temperature gauge range, dowel pin straight, standard tap screws, lapping plate dia, metric drill gauge, letter drill gauge, number drill gauge, cast iron globe valve flanged type, c.i. sluice gate valve flanged type, stop cock, slip-on forged steel flange, pipe threading die with handle, pulleys for v-belt or flat belt, v-belt and flat belt, washer, clutch, keys, jib, cotter and circlips, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel 300 mm, punch prick, mallet, aviation snip straight cut 300 mm, hammer flat headed with handle, hammer planishing, snip bent left cut 250 mm, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs, gauge plug single ended 5 to 55 by 5 mm set of 11 piece, gauge telescopic 8 to 150 mm, dial test indicator on stand, sine bar 125 mm, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator gauge, engineer try square, surface roughness comparison, vernier bevel protractor, carbide wear block, lathe tools h.s.s., lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type with stand manually, adjustable pipe chain tong to take pipes, spanner adjustable, s.s. and s.c. centre lathe, drilling machine pillar sensitive, drilling machine bench sensitive, d.e. pedestal grinding machine, transformer welding set 300 amps, welding cable, lugs for cable, earth clamps, arc welding table, oxy-acetylene gas welding set, gas welding table with positioner, welding torch tips, trolley for gas cylinders, hammer chipping 300g, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16837694
Location : doda , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for mini electric grinder , semi hollow rivet punch , double ended screw driver , tool carry bag , cutting wheel 14 inch , grinding wheel 4 inch , metal cutter carbon bush , metal grinder carbon bush , bench grinder wheel, dg cash, mini electric grinder, semi hollow rivet punch, double ended screw driver, tool carry bag, cutting wheel 14 inch, grinding wheel 4 inch, metal cutter carbon bush, metal grinder carbon bush, bench grinder wheel
Agency / Dept :
indian army
Due Date :
Aug 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16854181
Location : haldwani , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for fitter trade hand tools and equipment - steel rule with metric british graduation , caliper outside spring type , hammer ball peen with handle , file flat second cut , file half round second cut , hacksaw frame fixed type , safety goggles , straight edge steel , vernier caliper , punch letter set , drill twist straight shank , drill twist taper shank , file feather edge smooth , file triangular smooth , file round second cut , file square second cut , file triangular second cut , file flat second cut safe edge , file flat bastard , file half round bastard , file round bastard , file hand second cut , wire brush , wooden handle forged soldering iron copper bit , hand reamer set taper pin straight flute , machine reamer parallel helical flute , scraper flat , scraper triangular , scraper half round , chisel cold crosscut diamond point , chisel cold flat , chisel cold round nose , drill chuck with key , wheel dresser , lockers with 8 drawers , metal rack , instructor table , instructor chair , black board with easel , torque wrench , power tools for fastening , different profile gauges , knurling tool diamond straight diagonal , indexable boring bar with inserts , temperature gauge , dowel pin straight , standard tap screws , lapping plate , medium carbon heat treated alloy steel metric studs and bolts along with nuts , caps screws , drill gauges , cast iron globe valve , stop cock , slip on forged steel flange , pipe threading die with handle , jigs fixture , pulleys for v belt or flat belt , steel keys , damaged old spur gear , v belt and flat belt , packing gasket , washer clutch keys jib cotter circlip , hollow punch , drill drift , bearing different types , lifting sling , bearing extractor , pulley extractor , mallet , aviation snips straight cut , flat headed hammers with handle , snip bent left cut , slip gauge as johnson metric set , dial vernier caliper , screw thread micrometer , digital micrometer outside , engineers try square , carbide wear block , arm strong type tool bit holder , pipe bender machine , pneumatic trainer kit , carrier for mounting components such as pb relay boxes , cut section model for pneumatic components , hydraulic trainer kit , hydraulic workstation , cut section models for hydraulic components, as per specification
Agency / Dept :
department of personnel and training
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16742597
Location : chinsurah magra , west bengal
Source : GEM Tenders
LIVE TENDER
tender for all geared , starter motor axial type pre engagement type and construction of axial type , storage type water cooler hot and cold , telescopic alidade , three four door refrigerator inverter type , thyristor igbt controlled vvvf ac motor drive with control panel , tinnmans shear , total station , transit theodolite with stand with all accessories , turbocharger cut sectional view , ultrasonic injection cleaning equipment , universal tool and cutter grinder , vrf vrv ac unit , water cooled induction welding brazing machine. , water cooler storage type , water dispenser bubble type hot and cold , water pump for dismantling and assembling , wireless communication modules for interfacing with microcontrollers rfid card reader finger print zigbee gps gsm bluetooth wifi , working condition of diesel engine crdi 4 stroke engine assembly with fault simulation board , working condition of ev electric vehicle car , apparatus for measurement of thermal conductivity of good and bad conductors , air blow gun with standard accessories , air ratchet with standard accessories , analog component trainer , angle truing attachment for surface grinding machine , apparatus for measurement of coefficient of expansion thermal of solid and liquid , apparatus for measurement of construction of efficient of expansionthermal of solid pulinger s apparatus , automatic reverse forward starter , autotransformer , belt tensioner gauge , bench lever shears , bench vice , binocular , boiling point and melting point apnaratus , bourdon tube c type pressure gauge , box sextant , cable straight jointing kit , calculator scientific non programmable , capsule type pressure gauge , cell phone power source with charger chords for different cell phones , chromatographic equipment , compression testing gauge suitable for diesel engine with standard accessories , computing scales five hectares , computing scales two hectares , condenser for distillation lebig , cork press , dc regulated variable programmable dc power supply , digital viscometer , digital and analog bread board trainer , digital balance 200 gm , digital balance 10 kg , digital ic tester , digital ic trainer , digital micrometer outside , dimmer starter , discrete component trainer basic electronics trainer , dmx controller , dual dc regulated power supply , dusk and dawn switch , electro magnetic relay with control panel a cut out relays b over current c under voltage , engineers stethoscope , ev charger home 1 phase input , ev charge, 3 phase input , fibre glass tape , fuel injection pump dismantling tool kit universal vice , fuel injection pump ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , growler armature , gunter s chain , hand reamers adjustable , height indicators , hollow punch set of seven pieces , hydraulic crimping tool for ug cable crimping with bits , hydraulic jack hi lift type 3 ton capacity and 5 ton capacity , impulse relay , indexing head with motorized for tool and cutter grinding machine , injector cleaning unit , injector testing set hand tester , insulators including hardware fitting , inverter with battery , land measuring chain , lcd based dpm , lcr meter digital handheld , leveling staff , levelling staff , liquid penetrate inspection kit , machine vice , magnet bar for magnetizing through compass needles , magnetic flux meter , metal cross staff box type , mppt based charge controller , multi scan tool with oscilloscope , multiangle magnetic clamp set , offset rod , oil pump for dismantling and assembling , pen knife , ph meter digital ,, workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
2.42Cr
View Documents
T18 Ref No : 16835395
Location : ghatshila , jharkhand
Source : GEM Tenders
LIVE TENDER
tender for demolishing r.c.c work , demolishing cement concrete , earth work , filling available excavated earth , filling in plinth with sand , plain cement concrete 1 isto 3 isto 6 , laying position cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1.5 isto 3 , steel reinforcement , providing and fixing centering and shuttering , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , structural steel work , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , providing and fixing concertina coil , premium acrlic smooth exterior paint , chain link , supplying and laying painting with synthetic enamel paint , steel work in built up tubular , transportation of building rubbish , transportation of excavated earth , surface dressing , cleaning jungle , providing and applying priming coat with ready mixed wood, construction of boundary wall from sitadanga to jaduguda thana in ucil housing colony jaduguda, demolishing r.c.c work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 2 km lead as per direction of engineer in charge ., demolishing cement concrete mix 1 / 3 /6 as richer mix manually or by mechanical means including disposal of material within 1 km lead as per directions of engineer in charge ., earth work in excavation in foundation, trenches or drains not exceeding 1.50m in width or 10.00 sqm on plain including dressing of sites and ramming of bottoms, lift upto 1.50m including getting out the excavated soil and disposal of surplus excavated soil, including dewatering and directed with a lead of 500 m ., filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.50 m., supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete of direction of the engineer in charge., providing and laying plain cement concrete1/3/6 - 1 cement /3 coarse sand / 6 graded stone aggregate 40mm nominal size in foundation plinth wherever necessary including desalinating finishing curing etc as per specification all complete but excluding the cost of centering and shuttering etc, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1 isto 2 isto 4 (1 cement / 2 coarse sand / 4 graded stone aggregate 20mm nominal size), providing and laying reinforced cement concrete work 1 isto 1.5 isto 3 - 1 cement /1.5 coarse sand / 3 graded stone aggregate 20mm down screened and washed including machine mixing placing in position and mechanically vibrating in columns pillars etc to any level and anywhere and like including preparing of the top surface finishing curing etc complete in all respects as per specification and direction of the engineer-in-charge, steel reinforcement for reinforced cement concrete work including transporting decoiling straightening derusting placing cutting to requiste length hooking bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loos rust and applying a coat of cement wash if necessary complete in all respects as per drawing and as directed, providing and fixing centering and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of column etc. for mass concrete., providing and fixing centering and shuttering including strutting propping etc and removal of form for - lintels beams plinth beams chujja girders bressumers and cantilevers, providing and laying structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., providing and laying 1st class brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1/6 -1 cement / 6 coarse sand including all complete as per specification drawing and direction of the eic., providing and laying best quality brick work in super structure upto floor two level 1/6- 1 cement / 6 coarse sand including curing scaffolding shuttering etc all complete. all materials including cement etc to be supplied by the contractor, half brick masonry with common burnt clay f.p.s non modular bricks of class designation 7.5 in foundations and plinth in cement mortar 1/4 - 1 cement / 4 coarse sand, providing and laying 12 mm thick cement plaster 1/6 -1 cement /6 fine sand all complete as per specifications. all materials including cement etc to be supplied by the contractor, providing 15 mm thick cement plaster to a rough side in cement mortar 1/6 - 1 cement / 6 fine sand including scaffolding ,raking the joints backing the surface finishing to correct lines, levels plumb curing as required ., providing and laying 12 mm thick cement plaster 1/4 - 1 cement / 4 fine sand with a floating coat of neat cement punning with redoxided powder all complete as per specification. all materials including cement etc. to be supplied by the contractor., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron - y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape (r.b.t.) / spring core (2.5mm thick) wire of high tensile strength of 165 kg per sq. mm with tape (0.52 mm thick) and weight 43.478 gm per metre (cost of m.s. angle, c.c. blocks shall be paid separately) ., finishing walls with premium acrlic smooth exterior paint - whether coat with silicone additives of required shade - new work - two or more coats applied at the rate 1.43ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10 sqm as approved by engineer in charge, providing and fixing g.i chain link fabric fencing of required width in mesh size 50 x 50 mm including straightening with 2 mm dia wire or nuts. bolts and washers as required complete as per the direction of engineer in charge. made of g i wire of dia 4mm ., supplying and laying painting with synthetic enamel paint / over two coats primer of approved brand and manufacturer two or more coats ., steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coat of synthetic enamel paint including welding and bolted with special shaped washers, locking arrangement etc. all complete. hot finished welded type tubes for single and double leaf entrance gates. size of gate - 3.50 m x 1.80 m -3 nos. size of gate - 1.20 m x 1.80 m -8 nos., transportation of building rubbish from working site to other area upto 2 km by mechanical transport including loading unloading and lift upto 2.20 m disposal of same to be leveled and neatly dressed as per instruction of engineer in charge ., transportation of excavated earth from working site to other area load upto 1 km by mechanical transport including loading unloading and lift upto 2 20 m disposal earth to be levelled and neatly dressed as per instruction of engineer in charge, surface dressing of the ground including removing vegetation and inequalities, clay etc., not exceeding 15cm deep and disposal of rubbish lead upto 500 m and lift upto 1 km, cleaning jungle including uprooting of rank vegetation , grass , brush wood ,trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared., providing and applying priming coat with ready mixed wood/ iron primer of approved brand (asian/berger/nerolac/ ici dulux) - iron work
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 18, 2026 (18 days left)
Tender Value :
5.52Cr
View Documents
T18 Ref No : 16764448
Location : sanand , gujarat
Source : GEM Tenders
LIVE TENDER
tender for telescopic gauge 8 to 150mm , punch hollow 5 to 12mm , morse reduction sleeve 1to1 3to1 4to1 4to2 5to1 5to2 6to1 , mallet hard wood 500 gram , hammer plastic 250 gram with hadle , radiator cut section cross flow , radiator cut section down flow , turbocharger cut sectional view latest wgt type , valve spring compressor universal , cut section of cross ply and radial tyres , working model of torque converter model of lmv , transfer case with stand , multi angle magnetic clamp set metal base 18 10 10cm , h p welding torch with 5 nozzles, tools and equipment, telescopic gauge 8 to 150mm, punch hollow 5 to 12mm, morse reduction sleeve 1to1 3to1 4to1 4to2 5to1 5to2 6to1, mallet hard wood 500 gram, hammer plastic 250 gram with hadle, radiator cut section cross flow, radiator cut section down flow, turbocharger cut sectional view latest wgt type, valve spring compressor universal, cut section of cross ply and radial tyres, working model of torque converter model of lmv, transfer case with stand for dismantling and assembly to show the gear mechanism of forward and reverse speeds, multi angle magnetic clamp set metal base 18 10 10cm, h p welding torch with 5 nozzles
Agency / Dept :
department of employment and training DET
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16766254
Location : bathinda , punjab
Source : GEM Tenders
LIVE TENDER
tender for metal scissor , leather cutting rapi , combination sharpening stone , leather strop , shoe anvil , anvil , ball pin hammer , claw hammer , mallet hammer , knife , heavy duty knife , scale , l-type ruler , hollow round leather hole punch set , central punch , wooden work bench , jigsaw , drill machine, instruments for footwear modification lab, metal scissor, leather cutting rapi, combination sharpening stone, leather strop, shoe anvil, anvil, ball pin hammer, claw hammer, mallet hammer, knife, heavy duty knife, scale, l-type ruler, hollow round leather hole punch set, central punch, wooden work bench, jigsaw, drill machine
Agency / Dept :
all india institute of medical sciences AIIMS
Due Date :
Sep 05, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents
T18 Ref No : 16683143
Location : hyderabad , telangana
Source : GEM Tenders
corrigendum tender for each , screws for wood length 1 point 5 inches 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 inches dia 2mm 4mm 200 each , grease nipples 10mm 12mm , teflon thread seal tape standard size , file flat size 200mm 300mm , file round size 200mm 300 mm , file semi round size 200mm 300mm , centre punch metal , hollow punch set , chisel metal flat round , chisel wood with wooden handle , araldite tubes 50ml , rubber solution dendrite 500ml , fevicol wood adhesive 500ml , chalk piece box white , disposable overall x xl xxl for stp , health faucet as per sample , double connector hose for bathroom fittings as per sample , taps for wash basin hot water cold water as per sample , shower heads as per sample , shower mixer set as per sample , grease general purpose , drawer locks as per sample , hinges 2 inches 3 inches 4 inches ss , drawer handles as per sample , drawer knobs as per sample , tower bolts ss 2 inches 3 inches 4 inches , pad locks with 03 keys , coat hooks , self taping screw j hook ss 12mm 20mm 25mm 30mm , silicon tubes , silicon gun , glue gun , impact wrench bosch battery operated , screw driver sets , pliers medium size , adjustable spanner medium large , pipe wrench medium large , rivet gun , hammer small medium large , anchor flags port and stbd 20x20inch , bollas line 173 mtrs 4 mm , anchor cable chain hook 115cm x 10 mm , cloth 4 bye 2 for gun cleaning 10m x 4 inch , hand botha 1 point 5 x1 feet , dishwashing juite wire gala scrub , gashbag polythene 61 cm x 81cm medium , gashbag polythene 76 cm x 94cm large , gashbag rolls small 43 cm x 48cm , ground sheet 4x3 feet canvas grey , mousing wire 100 mtr , mug plastics with handle , natural juite twine 300 mtr for packing , polish mettal brasso 200ml each , wood polish warnish asian paints 500ml each , hammer 5kg weight with handle , chopper blade length 18 cm , crow bar 1m , crow bar 1 point 5 m , chipping scrubber , chipping hammer , torch medium ibell 28x12x7cm , chemistk light red , chemistk light yellow , chemistk light green , ear plugs generic soft foam corded orange 3m , hand gloves cotton with pvc dots , bosch gws 600 buffing machine , bosch gws 600 buffing machine wheel , wd 40 antirusht spray 341 gm each , grease lg 280 2 kg each , foot mat 1x1 mtr spungy anti skid , door step met 0 point 8x0 point 5 mtr spungy anti skid , ncml solution , cross bar brass stand for table flag , sharp shooter for cleaning of bulkhead floor , deck cleaning plastic brush with stick , deck cleaning mop squzer , deck cleaning wiper , deck mat grating red blue black , acrylic name tally , digital room thermometer , allen bolts m3 , allen bolts m4 , allen bolts m5 , allen bolts m6 , allen bolts m8 , allen bolts m10 , allen bolts m12 , allen bolts m16 , allen bolts m20 , allen bolts m24 , hv rubber mats , stainless bonding straps , braided wire bonding straps , steel db lock , panel lock , rubber shock mounts , lenolium sheet , digital thermometer portable for room temp humidity , velcro 2 inches wide , rope 08 mm pp , pulley for 08 mm rope brass , d shackel 8 mm with screw pin stainless steel , hose securing box for weather deck h 56cm l 56cm w 14cm , hose securing box for between decks h 90cm l 54cm w 30cm , stickers for 9 ltr afff 15cm x 15cm , stickers for 2kg co2 15cm x 15cm , stickers for 10kg dcp 15cm x 15cm , stickers for elsa 15cm x 15cm , stickers for bascca 15cm x 15cm , stickers for dc post fwd and aft 15cm x 15cm , stickers for dd, hardware1, gloves leather white 12 inch palm length adjustable size, gloves rubber long adjustable size heavy duty chemical resistant, gloves anti cut with high grip adjustable size breathable 5 layer protection, grinding wheel bosch metal 125mm grinding wheel set, cutting wheel bosch metal 125mm cutting wheel set, wire brush bosch 125mm wire brush set, buffing wheel bosch 125mm, grinding wheel bosch metal 7 inch grinding wheel set, wire brush bosch metal 7 inch wire brush, drill bits hss 2mm 3 point 5mm 4mm 4 point 5mm 6mm 8mm 10mm, drill bits for wood 2mm 3.5mm 4mm 4.5mm 6mm 8mm 10mm, bi metal hole saw set 20mm to 50 mm, high performance putty 1 kg packets, m seal 250 g packets, jubilee clip size 1 inches, jubilee clip size 2 inches, jubilee clip size 3 inches, jubilee clip size 4 inches, jubilee clip size 5 inches, jubilee clip size 6 inches, loctite o ring kit as per sample, measuring tape 5 10 30 and 50 mtr 2 each, neoprene rubber sheet 5mm thick x1m wide x1m length, oil absorbent pad 19 inches x 15 inches pack of 100, oil absorbent sweep high absorbing capacity durable, plastic funnel small medium large, ratchet screw driver set bosch or other recognised brands, ratchet socket set bosch or other recognised brands, ratchet square drive socket set bosch or other recognised brands, pop rivets aluminium and ss 2mm 4mm 6mm 100 each, safety goggles anti glare securing straps and face adequately covered, sampling bottles for hydraulic oil and lub oil 250ml, sand paper emery paper abressive paper 23x28 cms, screws metal ss star head length 1 point 5 inches 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 inches dia 2mm 4mm, screws self taping metal ss star head length 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 dia 2mm 4mm, screws for wood length 1 point 5 inches 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 inches dia 2mm 4mm, grease nipples 10mm 12mm, teflon thread seal tape standard size, file flat size 200mm 300mm, file round size 200mm 300 mm, file semi round size 200mm 300mm, centre punch metal, hollow punch set, chisel metal flat round, chisel wood with wooden handle, araldite tubes 50ml, rubber solution dendrite 500ml, fevicol wood adhesive 500ml, chalk piece box white, disposable overall x xl xxl for stp, health faucet as per sample, double connector hose for bathroom fittings as per sample, taps for wash basin hot water cold water as per sample, shower heads as per sample, shower mixer set as per sample, grease general purpose, drawer locks as per sample, hinges 2 inches 3 inches 4 inches ss 20 each, drawer handles as per sample, drawer knobs as per sample, tower bolts ss 2 inches 3 inches 4 inches, pad locks with 03 keys, coat hooks, self taping screw j hook ss 12mm 20mm 25mm 30mm, silicon tubes, silicon gun, glue gun, impact wrench bosch battery operated, screw driver sets, pliers medium size, adjustable spanner medium large, pipe wrench medium large 2 each, rivet gun, hammer small medium large 3 each, anchor flags port and stbd 20x20inch, bollas line 173 mtrs 4 mm, anchor cable chain hook 115cm x 10 mm, cloth 4 bye 2 for gun cleaning 10m x 4 inch, hand botha 1 point 5 x1 feet, dishwashing juite wire gala scrub, gashbag polythene 61 cm x 81cm medium, gashbag polythene 76 cm x 94cm large, gashbag rolls small 43 cm x 48cm, ground sheet 4x3 feet canvas grey, mousing wire 100 mtr, mug plastics with handle, natural juite twine 300 mtr for packing, polish mettal brasso 200ml each, wood polish warnish asian paints 500ml each, hammer 5kg weight with handle, chopper blade length 18 cm, crow bar 1m, crow bar 1 point 5 m, chipping scrubber, chipping hammer, torch medium ibell 28x12x7cm, chemistk light red, chemistk light yellow, chemistk light green, ear plugs generic soft foam corded orange 3m, hand gloves cotton with pvc dots, bosch gws 600 buffing machine, bosch gws 600 buffing machine wheel, wd 40 antirusht spray 341 gm each, grease lg 280 2 kg each, foot mat 1x1 mtr spungy anti skid, door step met 0 point 8x0 point 5 mtr spungy anti skid, ncml solution, cross bar brass stand for table flag, sharp shooter for cleaning of bulkhead floor, deck cleaning plastic brush with stick, deck cleaning mop squzer, deck cleaning wiper, deck mat grating red blue black, acrylic name tally, digital room thermometer, allen bolts m3, allen bolts m4, allen bolts m5, allen bolts m6, allen bolts m8, allen bolts m10, allen bolts m12, allen bolts m16, allen bolts m20, allen bolts m24, hv rubber mats, stainless bonding straps, braided wire bonding straps, steel db lock, panel lock, rubber shock mounts, lenolium sheet, digital thermometer portable for room temp humidity, velcro 2 inches wide, rope 08 mm pp, pulley for 08 mm rope brass, d shackel 8 mm with screw pin stainless steel, hose securing box for weather deck h 56cm l 56cm w 14cm, hose securing box for between decks h 90cm l 54cm w 30cm, stickers for 9 ltr afff 15cm x 15cm, stickers for 2kg co2 15cm x 15cm, stickers for 10kg dcp 15cm x 15cm, stickers for elsa 15cm x 15cm, stickers for bascca 15cm x 15cm, stickers for dc post fwd and aft 15cm x 15cm, stickers for dd pump, ba compressor portable eductor ss pump 20tph ss pump 40tph 15cm x 15cm, fluorescent green tape, fluorescent red tape, wheel spanner for ship allowance portable extinguisher
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16446232
Location : bhesan , gujarat
Source : GEM Tenders
tender for tools equipment and machinary - steel rule with metric and british graduation , try square , caliper inside spring type , scriber , centre punch , screw driver , chisel cold flat , hammer ballpen with handle , file flat second cut , file flat smooth , file half round 2 nd cut , hacksaw frame fixed type , safety googles , vernier bevel protector blade with acute angle attachments , portable rotory hammer drill electric , file flat bustard , file flat bustard , vernier caliper dial type , machine vice- swiwelbase , power tools for fastning , drill gauges , lifting sling , chipping hammer , hollow punch , crimping tool , rubber mat , wheat stone bridge with galvanometer and battery , potential transformer , solar panel with battery , single phase transformer, core type, air cooled , ceiling fan coil winding machine , primary current injection set , smart meter , ev charger home , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , conduit pipe bending machine, suitable for 15 mm,18 mm, 25 mmand 30 mm pipe , autotransformer 250v - 0 - 300 v,10a , power factor meter 440 v, 20 a, three phase portable box type , solid state solar based single phase energy meter bidirectional 5-30a 240v , magnetic flux meter 0-500 tesla , meter reading instrument mri , solar street light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 60 w led lights and 9 m height pole all dismountable , solar traffic light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable , solar dc pump 24v, 1 hp , digital multimeter, 150mm, 150 mm blade, 150 mm, 10 mm end,120 mm length, 150 mm flate type, 20 mm x 150 mm hcs, 450 grm, 1lbs, 220 grm, 1/2 lbs, 250 mm, 250mm, 300 mm, -, 26 mm capacity, 200 mm, 100 mm, 125 mm, capacity 10 to 18 mm, letter drill gauge number drill metric drill gauge 1.5 mm to12.5 mm 30 holes, single leg,8 mm nominal dia., 5,6,7 mm etc, 16 sq mm to 95 sq mm, 2ft x 4ft x 1inch, 415 v, 50hz, pt ratio, 440v/110v, 10va, 18 watt, 1 kva , 240-415 v, 50 hz, 250v, 50 hz, 1-ph, with speed control, 220v, 50 hz, 1-ph, output current - 200 a min with timer, 1 phase - smart energy meter 3 phase - smart energy meter, 1 phase input, 0-5,100,200,500milli-amperes 0-150,300,600,v ac-dc
Agency / Dept :
department of employment and training DET
Due Date :
Aug 14, 2026
Tender Value :
5.02L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Hollow Punch. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Hollow Punch sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Hollow Punch Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Hollow Punch, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Hollow Punch Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Hollow Punch Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Hollow Punch.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Hollow Punch depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Hollow Punch Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Hollow Punch bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Hollow Punch. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Hollow Punch, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Hollow Punch, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Hollow Punch?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Hollow Punch tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Hollow Punch?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Hollow Punch, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Hollow Punch is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All