sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

13Latest Gas release panel Tenders List

Latest Gas release panel Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Gas release panel tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Gas release panel tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Gas release panel Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Gas release panel tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Gas release panel Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Gas release panel Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Gas release panel Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Gas release panel tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Gas release panel Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Gas release panel sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Gas release panel tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Gas release panel tenders.

Is EMD mandatory for all Gas release panel tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Gas release panel work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Gas release panel tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Gas release panel Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16902918
Location : gorakhpur , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for soq1 , soq2 , soq3 , soq4 , soq5 , soq6 , soq7 , soq8 , soq9 , soq10 , soq11 , soq12 , soq13 , soq14 , soq15 , soq16 , soq17 , soq18 , soq19 , soq20 , soq21 , soq22 , soq23 , soq24 , soq25 , soq26 , soq27 , soq28 , soq29 , soq30 , soq31 , soq32 , soq33 , soq34 , soq35 , soq36 , soq37 , soq38 , soq39 , soq40 , soq41 , soq42 , soq43 , soq44, annual repair maintenance and operation of e and m installation at shravasti airport, periodical maintenance and operation of electrical and mechanical installations involving operation, repairs and maintenance, attending to complaints/faults/ breakdowns and taking rectification action, ensuring serviceability/satisfactory working condition of the systems, carrying-out preventive maintenance, maintenance of records/ documents etc. under this contract for shift duty for all 7 days on all working days including saturdays, sundays and holidays as per tender specifications, terms & conditions by providing/engaging following minimum number of man power i/c reliever. a-general duty purpose (a) supervisor- highly skilled - (at the rate 1 no hsk-supervisor per day for general shift for 6 days in a week). b-shift duty purpose (a)electrician-(sk) -3 shifts daily at the rate 01 no. electrician-skilled in each shift. (b)helper (usk) -3 shifts daily at the rate 01 no. helper in each shift. (c)electrician(sk)-2shifts daily for 6 day in a week at the rate 01no electrician in each shift. (d)helper (usk)-2 shifts daily for 6 day in a week at the rate 01 no helper in each shift. total minimum manpower i/c reliever - 12 numbers note-relievers shall do duty of electrician/helper as per site requirement., first year monthly visit of fire technician/service engineer form oem of fda system or from oem authorized dealer for carrying out healthiness check of fda system, attending faults, carrying out preventive maintenance i/c cleaning etc. as required of fire main panel ,repeater panels , detectors , response indicators & mcp of the fda system etc. making replacement of the spare parts/accessories etc. if required for healthiness of the fda system and submission of service report to e-i-c. charges against labour & tools etc. required for attending faults, preventive maintenance, servicing, replacement/installations of spare parts and accessories are included in the item. note 1. this boq item is only labour part. 2. all spare parts/accessories required for healthiness of fda system shall be provided by aai i.e paid to the agency against supply of materials as in extra item based on original tax invoice / supporting documents., second year monthly visit of fire technician/service engineer form oem of fda system or from oem authorized dealer for carrying out healthiness check of fda system, attending faults, carrying out preventive maintenance i/c cleaning etc. as required of fire main panel ,repeater panels , detectors , response indicators & mcp of the fda system etc. making replacement of the spare parts/accessories etc. if required for healthiness of the fda system and submission of service report to e-i-c. charges against labour & tools etc. required for attending faults, preventive maintenance, servicing, replacement/installations of spare parts and accessories are included in the item. note 1. this boq item is only labour part. 2. all spare parts/accessories required for healthiness of fda system shall be provided by aai i.e paid to the agency against supply of materials as in extra item based on original tax invoice / supporting documents., first year monthly visit of technician/service engineer form specialized agency for maintenance & up-keeping of fire extinguishers, fire hydrant/ fire fighting & suppression complete system as installed at shravasti airport inclusive of periodical checking/ testing, servicing, maintaining records and attending any number of break down calls of all fire extinguishers, hydrant valves, hose boxes, pipes, branch pipes, hose reels, hose pipes, nrvs, pipe lines, pressure switches, main mono-block motor pump set , booster/terrace mono block motor pump set, starter panels, pressure gauges, sluice valves/gate valve etc. as detailed in the special conditions of the contract, particular specification etc. complete as required. note- (1)this item is only service/labour part and does not cover material part. all spare parts / accessories required for healthiness of fire fighting system, fire extinguishers (refilling of gas, repair of accessories/ spare parts etc.) shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., second year monthly visit of technician/service engineer form specialized agency for maintenance & up-keeping of fire extinguishers, fire hydrant/ fire fighting & suppression complete system as installed at shravasti airport inclusive of periodical checking/ testing, servicing, maintaining records and attending any number of break down calls of all fire extinguishers, hydrant valves, hose boxes, pipes, branch pipes, hose reels, hose pipes, nrvs, pipe lines, pressure switches, main mono-block motor pump set , booster/terrace mono block motor pump set, starter panels, pressure gauges, sluice valves/gate valve etc. as detailed in the special conditions of the contract, particular specification etc. complete as required. note- (1)this item is only service/labour part and does not cover material part. all spare parts / accessories required for healthiness of fire fighting system, fire extinguishers (refilling of gas, repair of accessories/ spare parts etc.) shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., refilling of abc type 4 kg fire extinguisher, refilling of abc type 6 kg fire extinguisher, refilling of co2 type 4.5 kg fire extinguisher, refilling of co2 type 6.5 kg fire extinguisher, refilling of co2 type 9 kg fire extinguisher, first year servicing/maintenance etc. of schneider electric make 11 kv ht vcb panel (installed in ht panel room -panel type- pix-mv, special repair no. 0221189475/01/1, mfg year 2019 ) having 01 no. vcb ( i.e incoming cum outgoing ) as per oem recommendation by er./technician from oems or by er./technician of authorized dealer of oem. note- 1. servicing/maintenance etc. of existing 11 kv vcb panel to be done by oems recommended tools/kit by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of vcb braeker installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., second year servicing/maintenance etc. of schneider electric make 11 kv ht vcb panel (installed in ht panel room - panel type- pix-mv, special repair no. 0221189475/01/1, mfg year 2019 ) having 01 no. vcb ( i.e incoming cum outgoing ) as per oem recommendation by er./technician from oems or by er./technician of authorized dealer of oem. note- 1. servicing/maintenance etc. of existing 11 kv vcb panel to be done by oems recommended tools/kit by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of vcb braeker installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents, first year testing for healthiness and carrying out calibration of all relays installed in 11kv ht vcb panel (installed in ht panel room- panel type-pix-mv, special repair no. 0221189475/01/1 mfg yr 2019) having 01 no. vcb ( i.e. incoming cum outgoing vcb). note- 1. testing and callibrations to be done by oems recommended callibrated kit, by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of relays installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., second year testing for healthiness and carrying out calibration of all relays installed in 11kv ht vcb panel (installed in ht panel room-panel type- pix-mv, special repair no. 0221189475/01/1 mfg yr 2019) having 01 no. vcb ( i.e. incoming cum outgoing vcb). note- 1. testing and callibrations to be done by oems recommended callibrated kit, by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of relays installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., first year servicing of abb make, model- air circuit breaker 800 a through oem service engineer / oem authorized service engineer including carrying out of following works racking out & removal of acb from switch board, cleaning all parts for dust deposits foreign particles etc , degreasing the various parts of acb. cleaning all parts with cleaning agents such as crc 2 -26 checking the various settings within the acb of contacts, releases etc , checking the hardware for wear & tear, checking of termination & tightness, checking for all hardwares for its presence, replacement of spares / accessories for defective / worn out items (supply of spares / accessories required for healthiness of acb are in aai scope), regressing of the acb parts as recommended by oem, refixing the acb, testing and observance for normal operation of acb complete as required. (service reports to be submitted in oem letterhead / oem authorize service dealer letter head)., second year servicing of abb make, model-air circuit breaker 800 a through oem service engineer / oem authorised service engineer including carrying out of following works racking out & removal of acb from switch board, cleaning all parts for dust deposits foreign particles etc , degreasing the various parts of acb. cleaning all parts with cleaning agents such as crc 2 -26 checking the various settings within the acb of contacts, releases etc , checking the hardware for wear & tear, checking of termination & tightness, checking for all hardwares for its presence, replacement of spares / accessories for defective / worn out items (supply of spares / accessories required for healthiness of acb are in aai scope), regreasing of the acb parts as recommended by oem, refixing the acb, testing and observance for normal operation of acb complete as required. (service report to be submitted in oem letterhead / oem authorize service dealer letter head)., supply of new transformer oil conforming to is-335 in non-returnable barrel as per requirement., first year bdv testing (pre filtration or after filtration) of transformer oil from cpri or authorized dealer/ specialized agency having calibrated bdv testing kit including oil sample collection charges & submission of original test report on their letter head., second year bdv testing (pre filtration or after filtration) of transformer oil from cpri or authorized dealer/ specialized agency having calibrated bdv testing kit including oil sample collection charges & submission of original test report on their letter head., dehydration and filtration of transformer oil at site on the basis of the report of pre-bdv check., rewinding of ceiling fan/ wall fan/ exhaust fan as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangement for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note- dismantled material / wire shall be property of tenderer/contractor., rewinding of submersible motor-pump of capacity up to 2 hp as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangement for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note- dismantled material / wire shall be property of tenderer/contractor., rewinding of submersible motor-pump of capacity up to 7.5 hp as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangement for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note- dismantled material / wire shall be property of tenderer/contractor., rewinding of mono block motor-pump of capacity up to 10 hp as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangment for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note-dismantled material / wire shall be property of tenderer/contractor., lifting and lowering of submersible pump motor set up to 7.5 hp capacity from the depth upto 400 feet including dismantling of the column pipe, cable etc and re-installation of pump and motor set in the bore well along with all necessary work like providing and fixing of required gasket & nut bolts, and welding & threading of gi pipe and flenge etc as required and making connection to the discharge line after dry revolution test complete as required., first year all inclusive annual comprehensive maintenance contract (aiacmc) of the 1.0 tr/ 1.5 tr / 2.0 tr wall mounted split air-conditioners of different makes at different locations including carrying out quarterly visit for servicing and maintenance of ac units by specialized agency .work includes all repair, maintenance, attending to complaints / faults / breakdowns and taking rectification action, ensuring serviceability/satisfactory working condition of the systems including providing and fixing spares parts like all pcbs, refrigerant pipe, compressors, all type of relays, motors, handset say remote, thermostats, capacitors, selector switches, expansion valve etc. as required at site and as per special condition of the contract. note- a). all plastic parts e.g grill, diffuser, blower(fan blade) & painting is not covered in aiacmc. b). 01 job equal to aiacmc of 1 no split ac (1.0 tr/1.5 /2.0 tr) for 1 year., second year all inclusive annual comprehensive maintenance contract (aiacmc) of the 1.0 tr/ 1.5 tr / 2.0 tr wall mounted split air-conditioners of different makes at different locations including carrying out quarterly visit for servicing and maintenance of ac units by specialized agency .work includes all repair, maintenance, attending to complaints / faults / breakdowns and taking rectification action, ensuring serviceability/satisfactory working condition of the systems including providing and fixing spares parts like all pcbs, refrigerant pipe, compressors, all type of relays, motors, handset say remote, thermostats, capacitors, selector switches, expansion valve etc. as required at site and as per special condition of the contract. note- a). all plastic parts e.g grill, diffuser, blower(fan blade) & painting is not covered in aiacmc. b). 01 job equal to aiacmc of 1 no split ac (1.0 tr/1.5 /2.0 tr) for 1 year., first year all inclusive annual comprehensive maintenance contract (aiacmc) of daikin make variable refrigerant flow (vrf) air conditioning system including carrying out monthly visit for servicing and maintenance of ac units. works includes all repair, maintenance attending to complaints/ faults/breakdowns and taking rectification action, ensuring serviceability/ satisfactory working condition of the systems and providing spares like compressors, motors, all type of relays, all pcbs, handset say remote, thermostats, capacitors, selector switches, expansion valve , float switch and all type of sensors like coil sensor (suction sensor & discharge sensor), air sensor (suction sensor & discharge sensor) etc. as required at site and as per special condition of the contract. note- 1. all plastic parts e.g grill, diffuser, blower (fan blade), drain tray, heat exchange coils, sheet metals parts & painting is not covered in aiacmc. 2. qty- 1 hp shall be measured for aiacmc of 1 hp ac unit for 1 year., second year all inclusive annual comprehensive maintenance contract (aiacmc) of daikin make variable refrigerant flow (vrf) air conditioning system including carrying out monthly visit for servicing and maintenance of ac units. works includes all repair, maintenance attending to complaints/ faults/breakdowns and taking rectification action, ensuring serviceability/ satisfactory working condition of the systems and providing spares like compressors, motors, all type of relays, all pcbs, handset say remote, thermostats, capacitors, selector switches, expansion valve , float switch and all type of sensors like coil sensor (suction sensor & discharge sensor), air sensor (suction sensor & discharge sensor) etc. as required at site and as per special condition of the contract. note- 1. all plastic parts e.g grill, diffuser, blower (fan blade), drain tray, heat exchange coils, sheet metals parts & painting is not covered in aiacmc. 2. qty- 1 hp shall be measured for aiacmc of 1 hp ac unit for 1 year., first year annual inclusive annual comprehensive maintenance contract (aiacmc) of inbuilt water purifier (ro plus uv) having storage capacity of 120 ltr, make- eureka forbes/aqua guard at different locations of shravasti airport. work includes carrying out quarterly visit for preventive maintenance and service of water cooler with ro units by oem or authorized oem service dealer. work includes attending any number of breakdowns complaints/ faults and taking rectification action ensuring serviceability/satisfactory working condition of the systems. works includes refrigerant gas charging and repair/replacement of required consumables or other spares parts like candle, filter,membrane, etc. pcbs, refrigerant pipe/gas, compressors, all type of relays, motors, thermostats, capacitors, solenoid valve etc. through oem or authorized oem service dealer and maintaining records/ documentation as per engineer in charge and as per special condition of the contract. note - 1) 1 job equal to aiacmc of 1 no. water cooler with inbuilt ro for 1 year. 2) in this item, the replacement of consumables like pf candle filter, block filter/carbon & ro membrane are covered only one times in a year., second year annual inclusive annual comprehensive maintenance contract (aiacmc) of inbuilt water purifier (ro plus uv) having storage capacity of 120 ltr, make- eureka forbes/aqua guard at different locations of shravasti airport. work includes carrying out quarterly visit for preventive maintenance and service of water cooler with ro units by oem or authorized oem service dealer. work includes attending any number of breakdowns complaints/ faults and taking rectification action ensuring serviceability/satisfactory working condition of the systems. works includes refrigerant gas charging and repair/replacement of required consumables or other spares parts like candle, filter,membrane, etc. pcbs, refrigerant pipe/gas, compressors, all type of relays, motors, thermostats, capacitors, solenoid valve etc. through oem or authorized oem service dealer and maintaining records/ documentation as per engineer in charge and as per special condition of the contract. note - 1) 1 job equal to aiacmc of 1 no. water cooler with inbuilt ro for 1 year. 2) in this item, the replacement of consumables like pf candle filter, block filter/carbon & ro membrane are covered only one times in a year., replacement of oem recommended, suitable block/carbon filter 10 inch in the inbuilt water purifier of eureka forbes/aqua guard make as and when required., replacement of oem recommended, suitable pf candle filter 10 inch in the inbuilt water purifier of eureka forbes/aqua guard make as and when required., replacement of oem recommended, suitable membrane filter in the inbuilt water purifier of eureka forbes/aqua guard make as and when required., first year annual inclusive annual comprehensive maintenance contract (aiacmc) of existing 01 number of old boom barriers ( length - 6meter, model (essl)- bg-bdc-rl-100) by carrying out half yearly preventive maintenance service, minor repairs, supply and replacement of all spares/electrical, electronic components, motor, pcb card etc. and to attend any number of breakdown calls/complaints/fault as and when required to ensure safe functioning of equipments to the satisfaction of engineer-in -charge, including technical and service support and spares support from oem or his authorized service dealer or any other specialized agency as approved by engineer-in -charge as per scc and technical specifications of the contract., second year annual inclusive annual comprehensive maintenance contract (aiacmc) of existing 01 number of old boom barriers ( length - 6meter, model (essl)- bg-bdc-rl-100) by carrying out half yearly preventive maintenance service, minor repairs, supply and replacement of all spares/electrical, electronic components, motor, pcb card etc. and to attend any number of breakdown calls/complaints/fault as and when required to ensure safe functioning of equipments to the satisfaction of engineer-in -charge, including technical and service support and spares support from oem or his authorized service dealer or any other specialized agency as approved by engineer-in -charge as per scc and technical specifications of the contract., first year re-calibration of available clinometer of ama make from the original equipment manufacturer (oem) for papi calibration, including packing, forwarding, transit insurance, and transportation charges for both dispatch and return at shravasti airport., second year re-calibration of available clinometer of ama make from the original equipment manufacturer (oem) for papi calibration, including packing, forwarding, transit insurance, and transportation charges for both dispatch and return at shravasti airport., first year decoration of terminal building with decorative lights on the occasion of independence day, republic day and any other occasions as decided by eic for 03 days on each occasion on hiring (rental) basis with following type of lights and decoration accessories with provision for operation as per national flag theme (tricolour) / occasion themes for indoor & outdoor use, including supply and installation of lights with suitable mounting arrangements, wiring / cabling, loading, unloading, transportation, dismantling etc. complete as required. (the installation & testing of lighting systems and decoration accessories shall be completed by 0500 pm, one day prior to the occasion). decorative lights shall be led series riser pixel light bright (each riser of approx. 30 feet. length) (tri- colour pattern)., second year decoration of terminal building with decorative lights on the occasion of independence day, republic day and any other occasions as decided by eic for 03 days on each occasion on hiring (rental) basis with following type of lights and decoration accessories with provision for operation as per national flag theme (tricolour) / occasion themes for indoor & outdoor use, including supply and installation of lights with suitable mounting arrangements, wiring / cabling, loading, unloading, transportation, dismantling etc. complete as required. (the installation & testing of lighting systems and decoration accessories shall be completed by 0500 pm, one day prior to the occasion). decorative lights shall be led series riser pixel light bright (each riser of approx. 30 feet. length) (tri- colour pattern)., first year healthiness check of 4kw ccr including , carrying out preventive maintenance , doing servicing , repairing & replacement of spare parts if required complete as required by oem service engineer or specialized/expert service engineer as per approval of e-i-c., second year healthiness check of 4kw ccr including , carrying out preventive maintenance , doing servicing , repairing & replacement of spare parts if required complete as required by oem service engineer or specialized/expert service engineer as per approval of e-i-c., supply of wind cone /wind sock have a length of not less than 12 feet and diameter at larger end of not less than 0.9m as per icao guidelines., dsr work- execution of works as per cpwd carrying out any item of dsr (e&m)-2022 works as per site requirement complete as required for attending repair and maintenance, breakdowns and upkeep of internal and external electrical installations as per direction of engineer-in-charge at all locations under shravasti airport conforming to cpwd general specifications for electrical works part-i (internal) 2013, part-ii (external) 1994 and part -iv (substation) 2013, and also to relevant bis specifications. the bidder shall quote the rate in inr only for the job corresponding to the base rate (rs. 1,00,000 i/c gst as per proposed estimate) and percentage above / below shall be calculated by aai based on quoted rate w.r.t base rate and will be paid as per payment methodology given in annexure- b. for example - if agency desires to quote 5 percentage above on dsr-2022 rates, the rate column shall be filled as rs. 1,05,000.00 i/c gst & if agency desires to quote 5 percentage below on dsr-2022 rates, the rate column shall be filled as rs.95,000.00 i/c gst. note - payment on dsr work shall be paid as per payment methodology given at page no. 211 as annexure-b.
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
1.19Cr
View Documents
T18 Ref No : 16669844
Location : sri ganganagar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for pump 60 hp motor , butter fly valve with di disc 100 mm , butter fly valve with di disc 80mm , nrv100mm , lading valve single way , hose box double door , short branch ss , delivery hose pipe 15 ptr , ms band 100 mm , ms band 25 mm , ms flanges table 8 hole 100 mm , ms flanges table 4 hole 100 mm , ms flanges table 4 hole 80 mm , ms butter fly flanges table 4 hole 80 mm , reducer , fire panel 60 hp stater , pressure gauge , foot valve 100 mm , air release valve 1 inch , gi nipple , sifon gauge 12 mm , c class 100 mm ms pipe 5mm thickness , c class 80 mm ms pipe 5mm thickness , c class 50 mm ms pipe 5 mm thickness , c class 25 mm ms pipe 5 mm thickness , inlet valve two ways , patti fastnar 10mm , bolt fastnar 10 mm , teflon tape , primer , red paint , tarpin oil , support for hydrant line , gas kit , ms socket 25 mm , sprinkler brass , sprinkler katori , clump 100mm , clump 50mm , clump 25 mm , tie rod 10 mm , smoke detector , pump room , fire extinguisher abc type , fire extinguisher co2 type , fire extinguisher water type , fire extinguisher foam type , emergency sign board , 4 core coper cable , fire bucket , display panel , flexible sprinkler hose pipe , foam making branch 5x , afff foam 3 precentage , control panel, automatic fire detection and suppression system for ration and fol stores, pump 60 hp motor, butter fly valve with di disc 100 mm, butter fly valve with di disc 80mm, nrv100mm, lading valve single way, hose box double door, short branch ss, delivery hose pipe 15 ptr, ms band 100 mm, ms band 25 mm, ms flanges table 8 hole 100 mm, ms flanges table 4 hole 100 mm, ms flanges table 4 hole 80 mm, ms butter fly flanges table 4 hole 80 mm, reducer, fire panel 60 hp stater, pressure gauge, foot valve 100 mm, air release valve 1 inch, gi nipple, sifon gauge 12 mm, c class 100 mm ms pipe 5mm thickness, c class 80 mm ms pipe 5mm thickness, c class 50 mm ms pipe 5 mm thickness, c class 25 mm ms pipe 5 mm thickness, inlet valve two ways, patti fastnar 10mm, bolt fastnar 10 mm, teflon tape, primer, red paint, tarpin oil, support for hydrant line, gas kit, ms socket 25 mm, sprinkler brass, sprinkler katori, clump 100mm, clump 50mm, clump 25 mm, tie rod 10 mm, smoke detector, pump room, fire extinguisher abc type, fire extinguisher co2 type, fire extinguisher water type, fire extinguisher foam type, emergency sign board, 4 core coper cable, fire bucket, display panel, flexible sprinkler hose pipe, foam making branch 5x, afff foam 3 precentage, control panel
Agency / Dept :
indian army
Due Date :
Aug 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16707355
Location : dudhi , uttar pradesh
Source : GEM Tenders
tender for custom bid for services - proposal for site inspection which includes visual inspection, cylinder pressure check, gas release check, gas release panels, high pressure tubing validity review and overall functioning of the nn100 (inert gas) system to s..
Agency / Dept :
uttar pradesh rajya vidyut utpadan nigam limited UPRVUNL
Due Date :
Aug 21, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16513857
Location : new delhi , delhi
Source : GEM Tenders
tender for fk-5-1-12 gas , solenoid actuator - 24 v dc , manual actuator , pneumatic actuator , flexible discharge hose - 1.5 , manifold check valve , actuation hose , supply and installatin of release panel, fk 5 1 12 gas cylinders, supplly of 80 litres cylinder complete with valve assembly and a pressure gauge with a safety brust disc, supplly of 120 litres cylinder complete with valve assembly and a pressure gauge with a safety brust disc, solenoid actuator - 24 dc, manual actuator, pneumatic actuator, flexible discharge hose - 1.5, manifold check valve, actuation hose, installatin of release panel
Agency / Dept :
indian institute of technology IIT
Due Date :
Aug 20, 2026
Tender Value :
40L
View Documents
T18 Ref No : 16514856
Location : mumbai , maharashtra
Source : GEM Tenders
tender for clean agent mod 10 kg fe h710 s , clean agent mod 15 kg fe 15c s , multi sensor smoke and heat combination detector , manual gas release station re 716 mg , abs type manual call point with flop abort , 2 zone agent release panel with one solonid output , sounder com strobe re 25 ss , cables 2 core 1.5 sqmm armoured shielded red color , cables 3 core 1.5 sqmm flexible , installation charges for fire system , clean agent mod 10 kg fe mf10 , installation charges for portable fe, procurement and installation of automatic modular fire extinguisher onboard ins mahe, clean agent mod 10 kg fe h710-s, clean agent mod 15 kg fe 15c-s, multi sensor (smoke and heat combination) detector with base ul listed re 316 sh2l, manual gas release station re-716 mg, abs type manual call point with flop abort (yellow in color) re 716 my, 2 zone agent release panel with one solonid output approval ce mark re 120 gr, sounder com strobe re 25 ss, cables 2 core 1.5 sqmm armoured/ shielded red color, cables 3 core 1.5 sqmm flexible, installation charges for fire system, clean agent mod 10 kg fe mf10, installation charges for portable fe
Agency / Dept :
indian navy
Due Date :
Aug 20, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16083711
Location : uttara kannada , karnataka
Source : GEM Tenders
tender for clean agent mod 5kg fe h705 s , clean agent mod 10kg fe h710 s , clean agent mod 15kg fe h715c s , multi sensor smoke and heat combination detector with base ul listed re 316 sh2l , manual gas release station make ravel re 716mg , abs type manual call point with flop abort yellow in color re 716 my , 2 zone agent release panel with one solonid output. approval ce mark re 120 gr , sounder com strobe re 25 ss , cables - 2 core 1.5 sqmm armoured shielded red color , installation charges for fire system , clean agent mod 5kg fe mf05 , clean agent mod 15kg fe mf15 , installation charges of portable fe , freight charges for sales, supply and installation of automatic modular fire fighting system onboard malwan, clean agent mod 5kg fe h705 s, clean agent mod 10kg fe h710 s, clean agent mod 15kg fe h715c s, multi sensor smoke and heat combination) detector with base ul listed re 316 sh2l, manual gas release station make-ravel re 716mg, abs type manual call point with flop abort yellow in color re 716 my, 2 zone agent release panel with one solonid output. approval ce mark re 120 gr, sounder com strobe re 25 ss, cables - 2 core 1.5 sqmm armoured shielded red color, installation charges for fire system, clean agent mod 5kg fe mf05, clean agent mod 15kg fe mf15, installation charges of portable fe, freight charges for sales
Agency / Dept :
indian navy
Due Date :
Jul 13, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15826870
Location : kamrup , assam
Source : GEM Tenders
tender for odu 1 , odu 2 , 4-way cassette unit 1 , 4-way cassette unit 2 , y joints 1 , y joints 2 , cu piping , damper , actuator , nitrile rubber , wiring , mccb , mcb db 1 , mcb db 2 , mcb , allied electrical works , dx coil unit , 4-way cassette unit 3 , ahu , ahu kit , ref gas , control cable , drain pipe , ducting , acoustic nitrile rubber , vfd , strip heater , pdp , al cable 1 , al cable 2, supply installation testing and commissioning of vrf based air conditioning system, supply and itc of modular type variable refrigerant flow/variable refrigerant volume air cooled outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin rotary/scroll compressor(s), minimum two compressors (with individual seperate pcb) for above 6 hp modules/non module, microprocessor based controller, top discharge type condensing unit(s), with r-410-a refrigerant or equivalent, vibration isolators with suitable foundation etc. complete as required, as per nit specifications - 14 hp, supply and itc of modular type variable refrigerant flow/variable refrigerant volume air cooled outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin rotary/scroll compressor(s), minimum two compressors (with individual seperate pcb) for above 6 hp modules/non module, microprocessor based controller, top discharge type condensing unit(s), with r-410-a refrigerant or equivalent, vibration isolators with suitable foundation etc. complete as required, as per nit specifications - 10 hp, supply and itc of following minimum capacity 4 way cassette type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with dx copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc as per nit specifications - 2.56 tr, supply and itc of following minimum capacity 4 way cassette type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with dx copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc as per nit specifications - 2.0 tr, supplying, installation, testing and commissioning of odu y/t/multi joints. joints shall be of same original equipment manufacturer (oem) make as of odus and idus, supplying, installation, testing and commissioning of idu y/t/multi joints. joints shall be of same original equipment manufacturer (oem) make as of odus and idus, refrigerant piping for vrf system - supply , installation , testing and commissioning of copper piping in brazed construciton, complete with nitrile rubber insulation, supports/suspenders, as per enclosed specifications. refrigerant piping for suction gas with 19mm thick nitrile insulation & refrigerant piping for liquid gas with 13mm thick nitrile insulation (various capacities as per boq of nit document, supply, installation, testing and commissioning of motorized (on-off type) duct mounted gi volume control damper with enthalpy sensor and necessary control wire for integration within ahu room complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to smacna/is and as per specifications complete etc. as required - damper, supply, installation, testing and commissioning of motorized (on-off type) duct mounted gi volume control damper with enthalpy sensor and necessary control wire for integration within ahu room complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to smacna/is and as per specifications complete etc. as required - actuator, supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell nitrile rubber (class-o) insulation on existing duct as per nit specifications - 25mm, wiring for circuit/ submain wiring along with earth wire as per nit specifications, providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board as per nit specifications, supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess as per nit specifications, supplying and fixing following way, tpn, sheet steel, mcb distribution board, 240 v, on surface/ recess as per nit specifications, supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka mcbs as per boq enclosed with nit document, allied electrical works as per as per boq enclosed with nit document including supply installation testing and commissioning of panels, supply, installation, testing and commissioning of approved make direct expansion (dx) type cooling coil unit for air handling unit (ahu) as per boq/ specifications enclosed with nit document, supply and itc of following minimum capacity 4 way cassette type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with dx copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc as per nit specifications - 3.2 tr, supply and itc of sheet metal sectionalised construction double skin ahu for vrf/vrv system as per boq/ specifications enclosed with nit document, supply and itc of ahu kit, refrigerent gas - supply and top-up of refrigerent gas r410a., control cable - supply, installation, testing & commissioining of control cum transmission cabling between odu & idu 2c x 1.0 sqmm cu cable in rigid pvc conduit duly supported., drain piping - supply, installation and commissioning of upvc drain piping with 6/9 mm thick closed cell nitrile rubber insulation with all fittings, solvent, necessary accessories and supports. thermal insulation sleeve joints shall be sealed with black tape - 25 mm/32 mm, supply, installation, balancing and commissioning of factory/hand fabricated aluminium sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required - thickness 0.8 mm, supplying and fixing of following thickness open cell acoustic nitrile rubber insulation on existing duct after applying suitable adhesive for nitrile rubber. as per specifications and as required - thickness 10mm., supply, installation,testing, & commissioning of variable friquency drive, supply,installation,testing & commissioning of strip heater along with controller, supply of power distribution panel ac distribution panel board - ip65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, without mcbs etc. as required to be made of customised requirment for outdoor fixing., supply of lt armoured aluminium cable (1.1kv) as per boq/ specifications enclosed with the nit document - 16 sqmm, supply of lt armoured aluminium cable (1.1kv) as per boq/ specifications enclosed with the nit document - 35 sqmm
Agency / Dept :
employees state insurance corporation ESIC
Due Date :
Jul 07, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16139514
Location : kamrup , assam
Source : GEM Tenders
tender for odu 1 , odu 2 , 4-way cassette unit 1 , 4-way cassette unit 2 , y joints 1 , y joints 2 , cu piping , damper , actuator , nitrile rubber , wiring , mccb , mcb db 1 , mcb db 2 , mcb , allied electrical works , dx coil unit , 4-way cassette unit 3 , ahu , ahu kit , ref gas , control cable , drain pipe , ducting , acoustic nitrile rubber , vfd , strip heater , pdp , al cable 1 , al cable 2, supply installation testing and commissioning of vrf based air conditioning system, supply and itc of modular type variable refrigerant flow/variable refrigerant volume air cooled outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin rotary/scroll compressor(s), minimum two compressors (with individual seperate pcb) for above 6 hp modules/non module, microprocessor based controller, top discharge type condensing unit(s), with r-410-a refrigerant or equivalent, vibration isolators with suitable foundation etc. complete as required, as per nit specifications - 14 hp, supply and itc of modular type variable refrigerant flow/variable refrigerant volume air cooled outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin rotary/scroll compressor(s), minimum two compressors (with individual seperate pcb) for above 6 hp modules/non module, microprocessor based controller, top discharge type condensing unit(s), with r-410-a refrigerant or equivalent, vibration isolators with suitable foundation etc. complete as required, as per nit specifications - 10 hp, supply and itc of following minimum capacity 4 way cassette type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with dx copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc as per nit specifications - 2.56 tr, supply and itc of following minimum capacity 4 way cassette type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with dx copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc as per nit specifications - 2.0 tr, supplying, installation, testing and commissioning of odu y/t/multi joints. joints shall be of same original equipment manufacturer (oem) make as of odus and idus, supplying, installation, testing and commissioning of idu y/t/multi joints. joints shall be of same original equipment manufacturer (oem) make as of odus and idus, refrigerant piping for vrf system - supply , installation , testing and commissioning of copper piping in brazed construciton, complete with nitrile rubber insulation, supports/suspenders, as per enclosed specifications. refrigerant piping for suction gas with 19mm thick nitrile insulation & refrigerant piping for liquid gas with 13mm thick nitrile insulation (various capacities as per boq of nit document, supply, installation, testing and commissioning of motorized (on-off type) duct mounted gi volume control damper with enthalpy sensor and necessary control wire for integration within ahu room complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to smacna/is and as per specifications complete etc. as required - damper, supply, installation, testing and commissioning of motorized (on-off type) duct mounted gi volume control damper with enthalpy sensor and necessary control wire for integration within ahu room complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to smacna/is and as per specifications complete etc. as required - actuator, supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell nitrile rubber (class-o) insulation on existing duct as per nit specifications - 25mm, wiring for circuit/ submain wiring along with earth wire as per nit specifications, providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board as per nit specifications, supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess as per nit specifications, supplying and fixing following way, tpn, sheet steel, mcb distribution board, 240 v, on surface/ recess as per nit specifications, supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka mcbs as per boq enclosed with nit document, allied electrical works as per as per boq enclosed with nit document including supply installation testing and commissioning of panels, supply, installation, testing and commissioning of approved make direct expansion (dx) type cooling coil unit for air handling unit (ahu) as per boq/ specifications enclosed with nit document, supply and itc of following minimum capacity 4 way cassette type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with dx copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc as per nit specifications - 3.2 tr, supply and itc of sheet metal sectionalised construction double skin ahu for vrf/vrv system as per boq/ specifications enclosed with nit document, supply and itc of ahu kit, refrigerent gas - supply and top-up of refrigerent gas r410a., control cable - supply, installation, testing & commissioining of control cum transmission cabling between odu & idu 2c x 1.0 sqmm cu cable in rigid pvc conduit duly supported., drain piping - supply, installation and commissioning of upvc drain piping with 6/9 mm thick closed cell nitrile rubber insulation with all fittings, solvent, necessary accessories and supports. thermal insulation sleeve joints shall be sealed with black tape - 25 mm/32 mm, supply, installation, balancing and commissioning of factory/hand fabricated aluminium sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required - thickness 0.8 mm, supplying and fixing of following thickness open cell acoustic nitrile rubber insulation on existing duct after applying suitable adhesive for nitrile rubber. as per specifications and as required - thickness 10mm., supply, installation,testing, & commissioning of variable friquency drive, supply,installation,testing & commissioning of strip heater along with controller, supply of power distribution panel ac distribution panel board - ip65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, without mcbs etc. as required to be made of customised requirment for outdoor fixing., supply of lt armoured aluminium cable (1.1kv) as per boq/ specifications enclosed with the nit document - 16 sqmm, supply of lt armoured aluminium cable (1.1kv) as per boq/ specifications enclosed with the nit document - 35 sqmm
Agency / Dept :
employees state insurance corporation ESIC
Due Date :
Jul 09, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16499506
Location : new delhi , delhi
Source : GEM Tenders
tender for pressure and release switch anti handling , tilt switch anti handling , collapsible relay double relay switch anti handling , magnetic release anti handling , touch anti handling sensor ocm , vibration sensor handling , light sensor ambient , dark sensor ambient , sound sensor ambient , gas sensor ambient , humidity sensor ambient , ir proximity ambient , tv remote command , rc ied 100 meter command , toy car remote control command , dual rc ied 100 mr command , lesser switch command , mobile phone dtmf command , mechanical timer delay , ptd switch delay , digital clock delay , sequential timer delay , digital dawn timer delay , multi channel timer delay , blast sound generator 12v adaptor and speakers , alco panel size 4x2.5 ft mechanism fitting , chain of destination size 3x2 ft with led , components of ied led board with sound effect 3x2 ft , types of switches display board size 3x2 , electronic components display board size 3x2 , rsp flow chart board size 4x3 with led light and effects , do s and donts during search chart size 4x3 acrylic print , stages of c-ied operation chart size 4x3 acrylic print , radio controlled ieds chart size 4x3 acrylic print , drone ied threat chart size 4x3 acrylic print , deployment of rop chart size 4x3 acrylic print , ir barrier blast voice welcome , traffic cone ied , bluetooth dtmf ied , foot mat pressure, ied model room items, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 1, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 2, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 3, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 4, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 5, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 6, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 7, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 8, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 9, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 10, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 11, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 12, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 13, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 14, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 15, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 16, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 17, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 18, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 19, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 20, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 21, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 22, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 23, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 24, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 25, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 26, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 27, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 28, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 29, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 30, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 31, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 32, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 33, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 34, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 35, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 36, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 37, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 38, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 39, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 40, description along with complete specification and quantity of the item is uploaded in item spec doc attached at s no 41
Agency / Dept :
indian army
Due Date :
Aug 10, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Gas Release Panel. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Gas Release Panel sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Gas Release Panel Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Gas Release Panel, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Gas Release Panel Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Gas Release Panel Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Gas Release Panel.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Gas Release Panel depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Gas Release Panel Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Gas Release Panel bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Gas Release Panel. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Gas Release Panel, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Gas Release Panel, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Gas Release Panel?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Gas Release Panel tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Gas Release Panel?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Gas Release Panel, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Gas Release Panel is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All