sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

11Latest Free cooling arrangement Tenders List

Latest Free cooling arrangement Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Free cooling arrangement tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Free cooling arrangement tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Free cooling arrangement Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Free cooling arrangement tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Free cooling arrangement Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Free cooling arrangement Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Free cooling arrangement Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Free cooling arrangement tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Free cooling arrangement Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Free cooling arrangement sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Free cooling arrangement tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Free cooling arrangement tenders.

Is EMD mandatory for all Free cooling arrangement tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Free cooling arrangement work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Free cooling arrangement tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Free cooling arrangement Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16988528
Location : coimbatore , tamil nadu
Source : GEM Tenders
NEW TENDER
corrigendum tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
49.71L
View Documents
T18 Ref No : 16877861
Location : medchal , telangana
Source : GEM Tenders
LIVE TENDER
tender for desert cooler , pedestal type fan , wall mounted fan , deep freezer , 2 ton inverter split ac , 1.5 ton inverter split ac , 1 ton split inverter ac , ups , solar led light, provision of desert coolers and other items for drdo at shamirpet, supply, installation, testing & commissioning of wood wool pads steel body evaporative coolers- desert cooler, sump tank capacity 100 ltrs minimum, nominal air delivery / capacity 5000 cubic meter per hour, floor standing without caster wheels, aluminum blade (for 5000 nominal capacity),fan size 500 mm for 5000 nominal capacity. maximum power consumption at zero static pressure 350 watts for 5000 nominal capacity, three speed motor, minimum bee 5 star efficiency or highest efficiency as applicable. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition and switch and socket arrangement., supply, installation, testing & commissioning of pedestal type air circulator electric fan having 600 mm sweep size , capacitor type motor, minimum air delivery 250 cubic meter per minute maximum input power 200 watt for 600mm sweep,rated voltage 240 volt ac, 50hz, minimum bee 5 star efficiency or highest efficiency as applicable. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition and switch and socket arrangement., supply, installation, testing & commissioning of 400mm sweep wall mounted electric fan having 400 mm sweep size , capacitor type motor, minimum air delivery 65 cubic meter per minute maximum input power 61 watt for capacitor type and 73 watt for non- capacitor type fan for 400 mm sweep,rated voltage 230 volt ac, 50hz, 03 speed steps with rotary switch speed control mechanism and maximum speed 1300 rpm, angular movement 90 degree, minimum bee 5 star efficiency or highest efficiency as applicable. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition and switch and socket arrangement., supply, installation, testing & commissioning of horizontal deep freezer having capacity 400 ltrs, temp set value minus 20 deg c, external dimensions 155mm x 600mm x 600mm. refrigerants eco friendly non flammable,non cfc refrigerants cool down time less than 6 hours from ambient to set point, durable inner doors for each compartment, main door with inner frp lining and durable magnetic gasket. rated voltage 230 volt, 50 hz ac supply. minimum bee 5 star efficiency or highest efficiency as applicable. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition and switch and socket arrangement., supply, installation, testing & commissioning of 2 ton wall mount split ac (indoor and outdoor included) having 6000 kcal/hr with tolerance +/- 10%, eco friendly r32 refrigerant, rated voltage 230 volt, 50 hz ac supply, minimum bee 5 star efficiency or highest efficiency as applicable with the following features only bis marked, compressor type inverter variable speed, copper evaporator and condenser, reusable air filter and standard accessories 3 meter refrigerant interconnecting copper pipe with additional length as per site requirement, 1 meter pvc insulated sheathed power cable (as per is 694), drain pipe, remote, minimum two years standard warranty on air conditioner, warranty on compressor 10.0 years, warranty on pcb, 5.0 years, voltage stabiliser, 16a mcb with enclosure, mounting stand arrangement for outdoor unit. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition., supply, installation, testing & commissioning of 1.5 ton split ac (indoor and outdoor included) having 4500 kcal/hr with tolerance +/- 10%, eco friendly refrigerant rated voltage 230 volt, 50 hz ac supply minimum bee 5 star efficiency or highest efficiency as applicable with the following features only bis marked, compressor type as per bee star rating label inverter variable speed, wall mount type split air conditioner with copper evaporator and condenser, reusable air filter and standard accessories 3 meter refrigerant interconnecting copper pipe with additional length as per site requirement, 1 meter pvc insulated sheathed power cable (as per is 694), drain pipe, remote, minimum two years standard warranty on air conditioner, warranty on compressor 10.0 years, warranty on pcb, 5.0 years voltage stabiliser 16a mcb with enclosure mounting stand arrangement for outdoor unit. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition., supply, installation, testing & commissioning of 1 ton split ac (indoor and outdoor included) having 3000 kcal/hr with tolerance +/- 10%, eco friendly refrigerant rated voltage 230 volt, 50 hz ac supply minimum bee 5 star efficiency or highest efficiency as applicable with the following features only bis marked, compressor type as per bee star rating label inverter variable speed, wall mount type split air conditioner with copper evaporator and condenser, reusable air filter and standard accessories 3 meter refrigerant interconnecting copper pipe with additional length as per site requirement, 1 meter pvc insulated sheathed power cable (as per is 694), drain pipe, remote, minimum two years standard warranty on air conditioner, warranty on compressor 10.0 years, warranty on pcb, 5.0 years voltage stabiliser 16a mcb with enclosure mounting stand arrangement for outdoor unit. additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition., supply, installation, testing and commissioning of 1 kva ups, high efficiency, sine filtered, unity power factor, thd within ieee 519 2024 standards with ip65 enclosure, supporting bracket and connecting accessories including earthing to the nearest point with the following features only bis marked makes input voltage (ac, 50 hz) single phase, 160v to 260v output voltage (ac, 50 hz) single phase, 230v with 1 percent tolerance availability of inbuilt isolation transformer yes type of battery smf-vrla (sealed maintenance free-valve regulated lead acid) stationary lead acid batteries backup time ( min ) 15 type of mounting of online ups floor standing operating temperature range (lower limit) 5deg c to 0 degc operating temperature range (upper limit) 45deg c to 50deg c minimum standard warranty five (05) years additional wiring if the power point distance is more than 1 meter along with pvc casing, caping along the wall or inside the false ceiling as per the site condition and switch and socket arrangement., supply, installation, testing and commissioning of ip 65 90 watt solar led light with inbuilt solar panel on the existing 9m pole with the following features brightness minimum 9000 lumens solar panel minimum 30w and matching with the battery ratings monocrystalline solar cells battery capacity 12v 24ah lifepo4 backup autonomy 2 to 3 rainy days (overcast weather reserve) enclosure material die cast aluminium charging time 4 to 6 hours of full sunlight lighting time 12 to 15 hours (or dusk-to-dawn) warranty three (03) years
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
18.17L
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15702821
Location : chandigarh , chandigarh
Source : GEM Tenders
tender for procurement of cat b stores socket heavy duty no 55 , socket heavy duty no 60 , socket heavy duty no 65 , socket heavy duty no 75 , socket heavy duty no 80 , socket heavy duty no 90 , heavy duty socket set , ring spanner set , de spanner set , bench grinder heavy duty , piston ring compressor , hammer ball pein 500 gram , nose pliers , steel tool box , cir clip pliers internal , cir clip pliers external , insulation tape 10 mtr , brake fluid dot 4 , thread lock liquid , rust cleaner liquid , thread tape , cotton waste , banjo washer 19 no , spring washer size 13 mm , fog light 12v , fog light 24v , radiator cleaner liquid 250 ml , radiator leak repair sealant , o ring set , multi meter digital , battery testing hydrometer , battery tester bct 800 , measurement tape 5 mtr steel , eye and eye round sling 12 ton capacity 4 mtr length , hand grinder gws 600 4 inch cutting wheel , hydraulic jack 10 ton capacity with handle , hydraulic jack 20 ton capacity with handle , hydraulic trolley jack 10 ton capacity , hydraulic trolley jack 20 ton capacity , mechanical jack 20 ton capacity , transmission gear box jack capacity 1500 kg comma mech type , combination pliers 6 by 8 , chisel flat 6 inch , adjustable wrench 12 inch , adjustable wrench 8 inch , pipe wrench 12 inch , pipe wrench 14 inch , pipe wrench 18 inch , pipe wrench 22 inch , pipe wrench 36 inch , valve grinding stick different size , d clamp different size , helmet grease gun 10 kgs , helmet grease gun 20 kgs , torque wrench, socket heavy duty no. 55 hexagonal make, taparia/stanley/bosch/eastman/tata agrico, socket heavy duty no. 60 hexagonal make, taparia/stanley/bosch/eastman/tata agrico, socket heavy duty no.65 hexagonal make, taparia/stanley/bosch/eastman/tata agrico, socket heavy duty no.75 hexagonal, make,taparia/stanley/bosch/eastman/tata agrico, socket heavy duty no.80 hexagonal, make, taparia/stanley/bosch/eastman/tata agrico, socket heavy duty no.90 hexagonal, make, taparia/stanley/bosch/eastman/tata agrico, heavy duty socket set hexagonal, make, taparia/stanley/bosch/eastman/tata agrico, ring spanner set 6x7 to 30x32, make,taparia/stanley/bosch/eastman/tata agrico, de spanner 6x7 to 30x32 set, make,taparia/stanley/bosch/eastman/tata agrico, bench grinder heavy duty, type, double wheel bench grinder power, 350 w to 900 w, 0.5-1 hp common voltage, 220-240v ac, 50 hz, single phase/440v 3 phase wheel size, 150 mm/200 mm, 6 inch/8 inch wheel bore, 12.7 mm/15.88 mm/32 mm no load speed, 2800-3450 rpm body material, cast iron/die cast iron motor, copper winding, induction motor protection, wheel guards, eye shields, spark deflectors warranty, 1 years ot above standard, is/ce certified make, taparia/stanley/bosch/eastman/tata agrico, piston ring compressor 2.5 inch x 5inch type, adjustable band type compressor band height, 3 inch/75 mm material, spring steel/stainless band use, suitable for most automotive engines make, taparia/stanley/bosch/eastman/tata agrico, hammer ball pein 500 gram, make, taparia/stanley/bosch/eastman/tata agrico, nose pliers 200 mm, make, taparia/stanley/bosch/eastman/tata agrico, steel tool box folding cantilever make, taparia/stanley/bosch/eastman/tata agrico, cir clip pliers 10 inch length internal make, taparia/stanley/bosch/eastman/tata agrico, cir clip pliers 10 inch length (external) make, taparia/stanley/bosch/eastman/tata agrico, pvc electrical insulation tape, self adhesive material, polyvinyl chloride width, 18/19 mm length, 10 mtr thickness, 0.125-0.15 mm adhesive, rubber based pressure sensitive water/uv resistance, yes standard, is 7809, brake fluid dot 4 type, synthetic/glycol ether based brake& clutch fluid grade, dot 4 standards, fmvss 116 dot4, iso 4925 class 4, thread lock liquid type, anaerobic thread locking adhesive (liquid) pack size, 250 ml standard, mil-s46163/equivalent, rust cleaner liquid type, liquid rust remover/rust cleaner base, acid based/water based pack size, 1 l, thread tape material, 100% polytetrafluoroethylene, ptfe width, 19/25 mm length, 13.2 m tickness, 0.075 mm, cotton waste material composition, 100% cotton gsm range, 120-160 gsm contaminants, must be free of metal, chips, zipper and heacy chemicals., banjo washer 19 no. material, copper/aluminium, spring washer size 13mm type, helical spring lock washer standard, is 3063/din 127/is 6735, fog light 12v type, automotive fog light, led/halogen mounting, bracket mounting standrad, ce/rohs/ip certified, fog light 24v type, automotive fog light, led/halogen mounting, bracket mounting standrad, ce/rohs/ip certified, radiator cleaner liquid 250 ml type, radiator flush/cooling system cleaner form, liquid concentrate, radiator leak repair sealant type, liquid leak repair sealant/ stop leak pack size, 500 ml, o ring set type, o ring assortant set material, nbr, nitrile rubber/silicone/viton standard, iso 3601/as568, multi meter digital display, lcd, 3.5 or 4.5 digit standard, iec 61010, battery testing hydrometer type, battery hydrometer/speific gravity tester material, glass/acid-resistant plastic body with rubber bulb purpose, checks battery charge condition by electrolyte density, battery tester bct 800 type, digital battery tester/ analyzer battery voltage, 12v & 24v standard, ce/rohs, measurement tape 5 mtr steel type, retractable measuring tape, eye and eye round sling 12 ton type- eye & eye round sling material- 100% high tenacity polyster length- 4 m eye type- reinforced soft eyes standard- en 1492-2/asme b30.9, hand grinder gws 600 4 inch cutting wheel type, hand grinder/angle grinder power input, 600w to 900w standard, ce/isi make, bosch/stanley/eastman/tata agrico, hydraulic jack 10 ton capacity with handle type, hydraulic bottle jack material, heavy duty alloy steel/forged steel standard, asme/isi, hydraulic jack 20 ton capacity with handle type, hydraulic bottle jack material, heavy duty alloy steel/forged steel standard, asme/isi, hydraulic trolley jack 10 ton capacity type, hydraulic trolley/floor jack material, heavy duty ms steel standard, asme/isi, hydraulic trolley jack20 ton capacity type, hydraulic trolley/floor jack material, heavy duty ms steel standard, asme/isi, mechanical jack 20 ton capacity type, mechnical screw jack/ratchet type operating method, manual handle operated material, heavy duty forged steel body standard, is/ce complaint, transmission gear box jack capacity 1500 kg, mech type type, hydraulic transmission/gear box jack operation, manual screw/hand wheel operated material, heavy duty fabricated steel body lifting mechanism, acme threaded screw with mechnical drive safety, mechanical locking arrangement, combination pliers 6/8 type, combination/lineman plier material, chrome vanadium/high carbon steel handle, insulated pvc/rubber anti slip grip standard, is 6149/iec complaint, chisel flat 6 inch type, flat/cold chisel material, chrome vanadium/en-8 steel standard, din 6453/is, adjustable wrench 12 inch type, adjustable wrench/adjustabel spanner material, chrome vanadium/alloy steel adjustment, prescision knurled worm screw standard, is/din complaint, adjustable wrench 8 inch type, adjustable wrench/adjustabel spanner material, chrome vanadium/alloy steel adjustment, prescision knurled worm screw standard, is/din complaint, pipe wrench 12 inch type, stillson type pipe wrench material, drop forged steel/cast iron body jaw type, hardened serrated adjustable jaw handle, heavy duty i-beam handle, pipe wrench 14 inch, type, stillson type pipe wrench material, drop forged steel/cast iron body jaw type, hardened serrated adjustable jaw handle, heavy duty i-beam handle, pipe wrench 18 inch type, stillson type pipe wrench material, drop forged steel/cast iron body jaw type, hardened serrated adjustable jaw handle, heavy duty i-beam handle, pipe wrench 22 inch type, stillson type pipe wrench material, drop forged steel/cast iron body jaw type, hardened serrated adjustable jaw handle, heavy duty i-beam handle, pipe wrench 36 inch type, stillson type pipe wrench material, drop forged steel/cast iron body jaw type, hardened serrated adjustable jaw handle-heavy duty i-beam handle, valve grinding stick different size type, manual valve grinding/valve lapping stick set set contents-2 pcs double ended grinding sticks cup sizes- 16mm, 20mm, 29mm, 35mm design- double ended for small and large engine, d clamp different size type- d clamp set sizes- 2 inch, 3 inch, 4 inch, 6 inch, 8 inch, 10 inch, 12 inch material- drop forged steel, helmet grease gun 10 kgs type- hand operated/lever type grease gun bucket pressure-up to 4000-5000 psi hose length- 2-2.2 m high pressure hose mobility- trolly/wheels provided material- steel bucket with aluminium pump head suitable- nlgi 1,2 & 3, helmet grease gun 20 kgs type- hand operated/lever type grease gun bucket pressure- up to 4000-5000 psi hose length- 2-2.2 m high pressure hose mobility- trolly/wheels provided material- steel bucket with aluminium pump head suitable- nlgi 1,2 & 3, torque wrench type-click type/single arm torque wrench torque range- 7-14 kg material- chrome vandium/alloy steel mechanism- audible click on preset torque direction- clockwise handle- lockable ergonomic grip make- taparia/stanley/bosch/eastman/tata agrico
Agency / Dept :
Due Date :
Jun 16, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16384445
Location : shimla , himachal pradesh
Source : GEM Tenders
tender for supply installation testing and commissioning of 315 kva, 11kv, 433v, 3 phase onan oil transformer , supply installation testing and commissioning of 11kv ht vcb panel , supply installation testing and commissioning of 11kv apfc panel , supply of 3cx95 sq.mm. xlpe insulated pvc sheathed aluminium conductor armoured power cable of 11kv grade , laying of 11 kv grade cable in the existing rcc or hume or metal pipe as required. , laying of 11 kv grade cable in the existing masonry open duct as required. , supplying and making indoor cable end termination with heat shrinkable jointing kit , supplying and making outdoor cable end termination with heat shrinkable jointing kit , supplying and making straight through heat shrinkable joint , supplying of 63 mm dia dwc hdpe pipe , laying of 63mm dia dwc hdpe pipe complete with fitting and cutting, jointing etc. , excavation of the cable trenches in hard rock , providing and laying in position cement concrete 1 to 2 to 4 ratio , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories , supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground , providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe , providing and fixing 25 mm x 5 mm copper strip , supply and fixing of fire retardant electrically insulated synthetic mat , providing and fixing 11kv high voltage level indicating danger plate, replacement of transformers ht panel apfc panel and other associated works at shimla airport, supply, installation, testing & commissioning of indoor type 315 kva,11kv/433 volts, 3 phase , 50 hz, step down , delta / star connected (dyn 11), neutral earthed, copper wound ,core type, double wound, oil immersed, onan cooled transformer having level 2 energy efficiency with octc (+) 10% to (-)10% in step of 2.5% of variation of hv, with automatic remote tape changer panel including oil conservator, explosion vent, 150 mm dial type themometer for indicating winding & oil temparature fitted in a marshalling box, silica-gel breather ,buchholz relay complete with weather proof cable end termination box on ht side suitable for termination of armoured cable of size upto 3 core 300 sq.mm on ht side, end termination box on lt side terminations of armoured cables, standard fitting and accessories , including first fill of filtered dehydrated oil etc. complete as per is 1180, level-2 as per specification enclosed. job includes, dismantling 02 nos. of existing 250kva transformers including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic., supply installation testing and commissioning of indoor type ip 42 floor mounted metal clad, 11 kv switch board vcb panel with 03 nos vcbs totally enclosed and fully interlocked, truck mounting, horizontal draw out, horizontal isolation type vacuum breaker as per is iec 62271 100 2007 and 200 2003, is 3427 as amended up to date for breakers and panels, having capacities as mentioned below, free standing extensible on both sides, single break, trip free mechanism, motorised charged and auto-manually closing breaker suitable for use on 11 kv, 3 phase, 50hz a.c. supply with rack in and rack out mechanism, air insulated but encapsulated copper bus bars capacity meeting fault level current, dc power pack, breaker featured with mechanical on- off indicator with hand trip device, breaker control tnc switch and all accessories such as shunt trip coil, and auxiliary switch of 4no and 4nc, motorised and manually operated spring assisted closing mechanism, emergency trip push button, interconnections, space heaters, earthing, etc. and equipped with following switchgears and accessories, connections suitable for cable upto 3c x 120 sqmm xlpe cable of 11 kv grade (cable entry from bottom). job includes, dismantling 01 nos. of existing ocb panel including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic. (detailed description of the item is available in attached technical specification document)., supply, installation, testing and commissioning of indoor type thyristor switched apfc panel consist of thyristors , intelligent apfc controller, thyristor firing modules, self current limiting coil complete with controls for automatic power factor improvement of capacitor bank(s) suitable for operation on 415 v, 50 hz, ac supply and to maintain the p.f. upto 0.99 lagging. fabricated from crca sheet steel enclosure made out of 2mm thick sheet steel with a common earth bus bar at rear with 2 nos earth studs at both the ends, cable alleys, 3 mm thick cable gland plates, extended rotary handles, 6 inch fans with filter for cooling etc. complete as required as per specification enclosed with the following equiped switch gears and accessories. job includes, dismantling 01 nos. of existing apfc panel including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic. (detailed description of the item is available in attached technical specification document)., supply of 3cx95 sq.mm. size of xlpe insulated pvc sheathed aluminium conductor armoured power cable of 11kv grade earthed conforming to is 7098 (part-ii) amended up to date., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 11 kv grade of following size in the existing rcc/ hume/ metal pipe as required. (a) up to 120 sq.mm., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 11 kv grade of following size in the existing masonry open duct as required. (a) up to 120 sq.mm., supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete as required. a) 63 mm dia (od - 63 mm & id - 51 mm nominal ), laying of following size dwc hdpe pipe complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 63 mm dia (od - 63 mm & id - 51 mm nominal ), excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil, refilling with excavated sand and or good soil after laying of cable/ pipe etc and disposal of surplus excavated soil as directed, within a lead of 50 metres., providing and laying in position cement concrete 1 to 2 to 4 (1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size) etc including form work etc as required., earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required., supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of copper/gunmetal nut bolt & spring washer spaced at 50mm.), providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required., providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required., supply and fixing of fire retardant electrically insulated synthetic mat of class b, 2.5 mm thick suitable for all ac voltages up to 11 kv meeting requirements of is 15652(2006) tested for breakdown strength, tensile or elongation, aging properties, insulation resistance, effect to acid, alkaline, diesel, transformer oil & leakage current test, fire test etc. having minimum width of 1000 mm + or - 20 mm along with all allied materials such as pu-resin, chemi bound, special pvc adhesive, liquid primer etc. in what so ever quantity required to complete the job as per site conditions and as per instructions from engineer-in-charge., providing & fixing size 200 mm x 150 mm size 11kv high voltage level indicating danger plates made of mild steel at least 2 mm thick & vitreous enamelled white on both sides & with inscriptions of voltage level danger red colour on front side as read.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 13, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15914143
Location : gangtok , sikkim
Source : GEM Tenders
tender for puf insulated hdpe water storage tank 500 ltr , puf insulated hdpe water storage tank 750 ltr , puf insulated hdpe water storage tank 2000 ltr , puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick , puf insulated ppr pipe 32 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , ppr elbow pn 20pipe 3 layer -32 mm size , ppr elbow pn 20pipe 3 layer -20 mm size , ppr tee pn 20pipe 3 layer -32 mm size , ppr tee pn 20pipe 3 layer -20 mm size , ppr union pn 20pipe 3 layer -32 mm size , ppr union pn 20pipe 3 layer -20 mm size , ppr half bend- 32 mm size , ppr half bend- 20 mm size , temperature differential controller for automatic on and off operation of heat tape , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire , aluminum tape , 2.5 hp single phase open well submersible pump set complete , direct-on-line starter control panel for 2.5 hp single phase openwell submersible pump set, supply of materials, 500 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 750 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 2000 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick 48 kg/cum dense, with outer protective layer of 3 mm pvc, puf insulated ppr pipe 32 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, puf insulated ppr pipe 20 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, ppr elbow (for pn 20pipe 3 layer)-32 mm size, ppr elbow (for pn 20pipe 3 layer)-20 mm size, ppr tee (for pn 20pipe 3 layer)-32 mm size, ppr tee (for pn 20pipe 3 layer)-20 mm size, ppr union (for pn 20pipe 3 layer)-32 mm size, ppr union (for pn 20pipe 3 layer)-20 mm size, ppr half bend- 32 mm size, ppr half bend- 20 mm size, temperature differential controller for automatic on/off operation of heat tape, programmable on below 10 degree c, cut off at 15 degree c. additional 2 pole 16a mcb for heating element load(manual operation), pt 100 sensor with 10 mtr signal wire, 3 core 1.5 sqmm pvc copper wire, aluminum tape for cladding of nitrile foam joints backing material thickened aluminium foil (typically reinforced for tear resistance and grid protection). adhesive layer high-polymer synthesis butyl rubber. total thickness ranges from 1.0 mm to 1.5 mm (with the aluminium layer typically 30 to 70 m). temperature range -40 degree c to 120 degree c (some specialized versions handle up to 260 degree c). elongation rate up to 1000 to accommodate surface expansion, contraction, and structural displacement. shelf life typically up to 12 months before application., supply of 2.5 hp single phase open well submersible pump set complete, suitable for operation on 220-240 volts, 50 hz ac supply, having motor output not less than 1.85 kw (2.5 hp), speed 2800-2900 rpm, fitted with 100 insulated copper winding, water cooled/oil cooled motor, capable of delivering discharge ranging from 50 to 100 lpm at total head varying from 100 m to 150 m. the pump shall be of single stage/two stage design as required, with discharge outlet size 32mm to 40 mm diameter. the pump set shall consist of high-grade stainless steel (ss) and cast iron (ci) body, corrosion resistant construction, stainless steel shaft, noryl/bronze/cast iron impeller, heavy duty water lubricated thrust bearings designed to withstand axial thrust loads and suitable mechanical seals. the pump and motor shall be mounted on a common shaft ensuring perfect alignment and efficient operation., supply of direct-on-line (dol) starter control panel for 2.5 hp single phase openwell/submersible pump set, suitable for operation on 220-240 volts, 50 hz ac supply, designed to handle full load current of 16-18 amperes, complete with heavy-duty contactor, thermal overload relay, single phasing protection, start and stop push buttons, capacitor start and capacitor run arrangement, indicating lamps, voltmeter, ammeter, mcb/mccb protection, terminal blocks, internal wiring, sheet steel enclosure duly powder coated, suitable for indoor/outdoor installation.
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Jul 13, 2026
Tender Value :
5.14L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15914144
Location : gangtok , sikkim
Source : GEM Tenders
tender for puf insulated hdpe water storage tank 500 ltr , puf insulated hdpe water storage tank 750 ltr , puf insulated hdpe water storage tank 2000 ltr , puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick , puf insulated ppr pipe 32 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , ppr elbow pn 20pipe 3 layer -32 mm size , ppr elbow pn 20pipe 3 layer -20 mm size , ppr tee pn 20pipe 3 layer -32 mm size , ppr tee pn 20pipe 3 layer -20 mm size , ppr union pn 20pipe 3 layer -32 mm size , ppr union pn 20pipe 3 layer -20 mm size , ppr half bend- 32 mm size , ppr half bend- 20 mm size , temperature differential controller for automatic on and off operation of heat tape , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire , aluminum tape , 2.5 hp single phase open well submersible pump set complete , direct-on-line starter control panel for 2.5 hp single phase openwell submersible pump set, supply of material, 500 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 750 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 2000 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick 48 kg/cum dense, with outer protective layer of 3 mm pvc, puf insulated ppr pipe 32 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, puf insulated ppr pipe 20 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, ppr elbow (for pn 20pipe 3 layer)-32 mm size, ppr elbow (for pn 20pipe 3 layer)-20 mm size, ppr tee (for pn 20pipe 3 layer)-32 mm size, ppr tee (for pn 20pipe 3 layer)-20 mm size, ppr union (for pn 20pipe 3 layer)-32 mm size, ppr union (for pn 20pipe 3 layer)-20 mm size, ppr half bend- 32 mm size, ppr half bend- 20 mm size, temperature differential controller for automatic on/off operation of heat tape, programmable on below 10 degree c, cut off at 15 degree c. additional 2 pole 16a mcb for heating element load(manual operation), pt 100 sensor with 10 mtr signal wire, 3 core 1.5 sqmm pvc copper wire, aluminum tape for cladding of nitrile foam joints backing material thickened aluminium foil (typically reinforced for tear resistance and grid protection). adhesive layer high-polymer synthesis butyl rubber. total thickness ranges from 1.0 mm to 1.5 mm (with the aluminium layer typically 30 to 70 m). temperature range -40 degree c to 120 degree c (some specialized versions handle up to 260 degree c). elongation rate up to 1000 to accommodate surface expansion, contraction, and structural displacement. shelf life typically up to 12 months before application., supply of 2.5 hp single phase open well submersible pump set complete, suitable for operation on 220-240 volts, 50 hz ac supply, having motor output not less than 1.85 kw (2.5 hp), speed 2800-2900 rpm, fitted with 100 insulated copper winding, water cooled/oil cooled motor, capable of delivering discharge ranging from 50 to 100 lpm at total head varying from 100 m to 150 m. the pump shall be of single stage/two stage design as required, with discharge outlet size 32mm to 40 mm diameter. the pump set shall consist of high-grade stainless steel (ss) and cast iron (ci) body, corrosion resistant construction, stainless steel shaft, noryl/bronze/cast iron impeller, heavy duty water lubricated thrust bearings designed to withstand axial thrust loads and suitable mechanical seals. the pump and motor shall be mounted on a common shaft ensuring perfect alignment and efficient operation., supply of direct-on-line (dol) starter control panel for 2.5 hp single phase openwell/submersible pump set, suitable for operation on 220-240 volts, 50 hz ac supply, designed to handle full load current of 16-18 amperes, complete with heavy-duty contactor, thermal overload relay, single phasing protection, start and stop push buttons, capacitor start and capacitor run arrangement, indicating lamps, voltmeter, ammeter, mcb/mccb protection, terminal blocks, internal wiring, sheet steel enclosure duly powder coated, suitable for indoor/outdoor installation.
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Jul 13, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16121822
Location : bardhaman , west bengal
Source : GEM Tenders
tender for supply laying testing and connecting xlpe sheathed pvc insulated screened pvc size 3.5 core 240 sqmm complete all as specified and as directed. , supply installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy sound level not more than 75db , m and l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground earth pit not less than 2.25mtr , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth getting out in soft loose soil complete all as specified and as directed. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , s and f galvanised iron pipe 80mm bore dia light grade for protection of ug cable laid in floors road crossing , s and f hdpe dwc double walled corrugated of diameter 90 mm including disconnection and connection of cable , material and labour for manufacturing installation testing and commissioning of factory made and tested cpri approved amf , m and l for surface excavation n.exc not exceeding 30 cm deep and averaging 15cm deep , m and l for hardcore using broken stone or boulders of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick , m and l for cement concrete in foundations filling and mass concrete type d2 1 4 8 , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole inclduing form work , m and l for excavating in post holes or similar holes each n exc 0.5 cu. m getting out returning filling in and ramming earth , s and f for steel work in tubular trusses cloumn purlin including special shaped washer nut bolt etc. , s and f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick , m and l for preparation of steel surfaces of any description over 10 cm , m and l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 , providing and laying at or near ground level factory made kerb stone of m25 grade , m and l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm , s and f 4pole 630 amp changeover switch with enclosure suitable for 415 v ac 3phase 4 wire , wrecking crow bar or claw bar as per is 706 (q3), supply, laying, testing and connecting xlpe sheathed,pvc insulated screened pvc bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade of size 3.5 core 240 sqmm complete all as specified and as directed., supply, installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy (sound level not more than 75db at a distance of 1 mtr) 14 guage as per guidelines issued by central pollution control board (cpcb ivplus, 4plus), 415 volts, 3 phase, 50 hz supply complete, control panel suitable for giving an output of 250 kva and alternator of suitable capacity and rpm coupled with each other with flexible coupling mounted on anti vibration pads on foundation as recommended by manufacturer. the dg set shall comprise of self starter with batteries, turbocharger, water cooler and comprising all standard fittings, fixtures & all piping etc. as below (a) alternator directly coupled with engine and suitable to produce 415 volts, 3 phase, 4 wire system, 50 hz, 0.8 pf 1500 rpm of capacity 250 kva all as per is 13364 and upto date amendments with h class insulation, self excited, self regulated, screen protected drip proof type with two end shield ball / roller bearing with damper winding in each pole, complete all as specified and directed. (b) engine water cooled diesel engine (cpcb norms iv compliance) developing 105 bhp having self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per oem) as per is 10001/10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 rpm industrial type as per bs 649 or is 1601 with ai electronic governor suitable to regulate speed of dg set from no load to full load complete with fuel tank of capacity as per manufacturer s recommendation, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer muffiers etc. for continuous operation and standard accessories, sump pre heaters, cold start kit etc., m&l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick, burried directly in ground, earth pit not less than 2.25mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to the galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers of galvanised steel and earth lead protected by provision of 40mm bore gi pipe medium grade and including provision of concrete pit in pcc 1 2 4 type b 1 (using 20mm grade crushed stone aggregate) with 40mm thcik rcc (type b 1) cover reinforced with 8mm dia tmt bar both ways with 12mm dia round bar handle and frame of angle iron 25x25x3mm with lugs 02 nos and 20mm bore gi light grade watering pipe with funnel and wiremesh and filling common salt and charcol and test point with fixing arrangements and including necessary excavation in any type of soil, returning filling in and removing excavated soil to a distance of 50mtr from the site, complete all as shown on electrical plate no 3 of mes ssr part i and directed., excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, getting out in soft / loose soil, complete all as specified and as directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed., removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil, complete all as specified and as directed., m&l sand cushioning (dry) in trenches for protection of ug cables (below, above and around the ug cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (note for the purpose of payment, punned thickness of sand cushioning only shall be measured and paid)., m&l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable, complete all as specified and as directed., s&f galvanised iron pipe 80mm bore (dia) light grade for protection of ug cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed., s & f hdpe dwc (double walled corrugated) of diameter 90 mm including disconnection and connection of cable near panel/oh for pipe fixing including joints complete all as directed., material and labour for manufacturing, installation testing and commissioning of factory made and tested, cpri approved amf panel for 250 kva dg set, indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 volts, 3 phase 4 wire 50hz ac supply system, conforming to is 5039, ip54 class protection and made of 3mm crca mild steel sheet with 50x 50x6mm angle iron frame, hinged doors, front & rear opeing and locking arrangement with necessary bus bar arrangment with insulated al. bus bar 1000 amps rating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for mccb with suitable capacity of al. bus bar strips including heat shrinkable sleeves, and providing extended bus bars with chember arrangement for outgoing cables, copper control wiring of required size for instruments including necessary pcc in 1 2 4 type b1 using 20mm graded stone aggregate for platform of suitable size , prewired with copper cable of suitable size all as standard practice of manufacturer specifications with the following acessories incomer1 & 2 (main & dg) (a) busbars 1000a tpn 415volts 3phase 4 wire color coaded aluminium busbars 1 lot (b) mccb 630a fp edo 50ka microprocessor based ( o/c, s/c & e/f) release with motor, closing & shunt, aux. contact 4noplus4nc 2 nos. (c) amf relay (econ) 1 nos. (i) digital ammeter 1 nos. (ii) digital voltmeter 1 nos. (iii) ct 1000/5a cl1 10va 1 nos (iv) phase indication light red 230v ac 1 nos. (v) phase indication light yellow 230v ac 1 nos. (vi) phase indication light blue 230v ac 1 nos. (vii) indication lamp 22mm dia color red 240v ac (on) 2 nos. (viii) indication lamp 22mm dia color green 240v ac (off) 2 nos. (ix) indication lamp 22mm dia color amber 240v ac (trip) 2 nos. etc., m&l for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed., m&l for hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed., m&l for cement concrete in foundations, filling and mass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., m&l for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed., s & f for steel work in tubular trusses, cloumn, purlin including special shaped washer, nut, bolt etc. complete using erw or induction butt welded tubes conforming to i.s.1161 1979 grade st.240 complete all as specified., s&f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, m & l for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified, m&l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 of 60 mm thickness, m35 grade with grey cement and pigment all as specified and directed., providing and laying at or near ground level factory made kerb stone of m25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 3 (1 cement 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed., m&l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by engrincharge., s&f 4pole, 630 amp changeover switch with enclosure, suitable for 415 v ac, 3phase, 4wire, 50 hz system, for changeover between main supply and dg set. the switch shall be heavyduty, onload type conforming to is/iec 609473, with silver alloy contacts and adequate breaking capacity. the unit shall be mounted on a sturdy angle iron frame fixed over pcc block with necessary nuts, bolts and support structure. terminals shall be suitable for cable/busbar connection and provision for safe manual operation (or motorised operation, if required) shall be included complete with all accessories, mounting hardware all as specified and directed.
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15957929
Location : bhilwara , rajasthan
Source : GEM Tenders
tender for turnkey procurement supply installation testing and commissioning of rac trade lab tools equipment at govt iti gulabpura bhilwara hack saw metal frame fixed , snip sheet metal curved nose , stakes different types , tin smith , knife folded stainless steel , tong close mouth and pick , welding table for gasor arc , flaring tool set single type for tube , swaging tool punch type set of size for tube , pinch of tool for copper tube , piercing pliers and reversing valve with access fitting , pipe or tube bender lever type , torque wrench , megger , service oscillator , c r o single beam , c r o dual traceor double beam , electronic leak detector , multi meter analogue type , fin straightenedor fin comb , dial thermometer with armored capillary dial , compressors testers for small hermetic compressors , temperature andhumidity recorder , split phase induction motor , bldc motor with controller , idu pulse generation type motor , capacitor start induction motor , ac 3 phase motor 400or 50 hz , portable air - lpg brazing kit , frost free refrigerator , threeor four door refrigerator inverter type , bench drilling machine , grinding machine , evacuating and charging station as above but fitted with weighing scale , two stage rotary vacuum pump 3or 4 cfm , window a c , split a c , duct able split a c 1 5 ton , recovery unit with cylinders , cassette air conditioner , fan coil unit , shell and tube dx chillers small , circulating water pump small , rotary hermetic compressor , bottle cooler visible , deep freezer , display cabinet , water cooler storage type , water dispenser bubble type hot and cold , ice candy plant , air conditioning indirect system water cooled , car ac tutorial model , bus ac tutorial model , automatic ice cube machine , glass board portable , chart stand , desktop computer , lcd projector or led or lcd tv big size , laptop , storage shelf, frame material heavyduty size 300 mm, length 200mm type curved nose material forged steel cutting edge hard and tempered, type grooving stake length 15 inch material options tool steel or cast iron number of grooves 10 different sizes purpose designed for creating various grooves in sheet metal work, length 400 mm graduation marked with both millimeters and inches material tool steel, type folded knife blade type double blade for electricians blade length 150 mm blade material stainless steel features folded system with two blades, tong close mouth and pickup good quality material mild steel, the gas or arc welding table with dimensions featuring a frame made of m s angle 50x50x6 mm and a top plain sheet designed to hold fire bricks along with a positioned stand made of m s pipe is generally used for robust welding tasks the specifications typically include table frame m s angle 50x50x6 mm stan m s pipe additional features complete with clamps and fire bricks extra bricks 06 nos, material block and cone made of alloy steel and hard tempered nickel chrome plated flaring capability can flare copper tubes with the following outer diameters 1or 2 inch 7or 16 inch 1or 4 inch 3or 16 inch 3or 8 inch 5or 8 inch and 5or 16 inch, function able to swage copper tubes with the following outer diameters 1or 2 inch 7or 16 inch 1or 4 inch 3or 16 inch 3or 8 inch 5or 8 inch and 5or 16 inch, the pinch-off tool for copper tubes with a diameter of 6mm to 18mm tube size compatibility 6mm to 18mm dia material chrome-plated for corrosion resistance and durability function designed to crimp or pinch-off copper tubes effectively, the piercing pliers and reversing valve with access fitting for 6-18mm tool type piercing pliers and reversing valve fitting size 6-18mm application typically used for hvac systems refrigeration and other applications requiring precise piercing and valve operation, type tube bender lever type tube compatibility 3 mm to 16 mm material chrome plated features lever type design for easy and precise bending suitable for bending tubes made of various materials like copper brass aluminum and steel graduated markings for accurate bending up to 180 degrees durable and corrosion-resistant chrome plating set includes 5 pieces set, length 300mm type ratchet type size 12 7mm material high-quality chrome plated steel features ratchet type forward reversible and locking arrangement, voltage range test voltages up to 1000v dc insulation resistance range typically from 0 01 m ohm to 200 m ohm display analog pointer, frequency range 100 khz to 30 mhz in 9 ranges power supply 220v plus minus 10persantage 50 hz accessories test lead banana rca and operating manual, specification of c r o single beam 5 mhz bandwidth dc 20mhz channels two channels trigger system automatic and normal level adjustable sources ch i ch ii alt line external slope positiveor negative coupling ac dc gnd trigger bandwidth 40 mhz computer interface usb crt 100 mm with accessories, bandwidth dc 60 mhz channels 2 channels trigger system automatic and normal level adjustable sources ch 1 ch 2 line external slope positiveor negative coupling ac dc gnd trigger bandwidth 60 mhz computer interface usb component tester built-in single touch continuity tester with beeper accessories two 10x probes two bnc-bnc cables power cord manual and calibration certificate, specifications electronic leak detector super sensitive function enhances sensitivity beyond standard settings for detecting small leaks especially with gases like refrigerants r134a r-404a r-410a r-407c r-22 sensitivity levels 3 sensitivity levels probe intelligent tip design to minimize false alarms by sensing environmental conditions flexible probe for accessing difficult-to-reach areas display six vertical led indicators red yellow or green provide relative signal level of detected leak selected sensitivity range lowor mediumor high diagnostic information includes low battery interference wait times contaminated atmosphere unit readiness or faults refrigerants detects all refrigerants cfcs hcfcs hfcs and blends sensor life 2000 hours sensing element heated tin oxide operating temperature range 0 to 140 degree f response time less than 1 second battery life 30 hours keypad functions onor off turns the unit on or off, type large size analog multimeter with automatic circuit breaker scale single scale for both ac and dc voltage with improved scale graduation features automatic circuit breaker for protection ac and dc amps share common jacks equipped with a plus minus polarity reverse switch accessories essential accessories such as test leads probes etc instruction manual suitable battery, designed for straightening the fins of condensers and cooling coils in air conditioning and refrigeration systems type fin straightenedor fin comb usage designed for straightening the fins of condensers and cooling coils fin spacing suitable for fins with spacings of 8 9 10 12 14 and 15 fins per inch compatibility can be used on both metal and plastic fins, dial thermometer type dial thermometer with armored capillary dial temperature range minus 50 degree c to plus 50 degree c capillary tube armoured to protect the capillary from physical damage and corrosion dial material stainless steel or durable plastic mounting comes with a mounting bracket or clip features armoured capillary provides protection for the capillary tube making it more suitable for rugged environments temperature range suitable for low temperature applications such as refrigeration or environmental testing dial face clear and easy to read with a scale marked for precise readings, the compressor tester for small hermetic compressors with electrical inputor output indicating facilities are as follows purpose testing of pressure testing of efficiency testing of current and voltage components fitted in the compressor tester digital voltmeter digital ammeter digital suction gauge digital pressure gauge digital energy meter time delay relay dimmer state lp hp cutout solenoid valve ms cylinder with gauge main switch air purge valve three-point socket 15 amp 5 amp charging lines gauge manifold temperature indicator test bulb tong tester main supply lead testing leads wiring and controls fixed on a sun mica panel board mounted on an ms mild steel stand, temperature and humidity recorder with the capacity to record data for 24 hours specifications recording type digital or analog recording duration 24-hour recording capability or longer durations display lcd or led display for real-time monitoring recording medium paper chart analog or digital memory digital power supply battery-operated or mains powered with backup battery, power output 1 hp horsepower voltage 230 v single phase frequency 50 hz speed typically 1440 rpm to 1750 rpm current fulll oad current around 7 8 a starting mechanism split phase starting mechanism with a start winding and a run winding centrifugal switch to disconnect the start winding after the motor reaches a certain speed construction enclosed fan-cooled tefc or open drip-proof odp housing ball bearing or sleeve bearing mounting foot-mounted or flange-mounted protection overload protection through thermal overload relay or built-in thermal protection, motor type brushless dc bldc motor power output 15 to 30 watts voltage 315v dc speed range 3000 to 4000 rpm revolutions per minute control type electronic speed controller esc phase 3-phase cooling air-cooled or fan-cooled components 1 forwardor revers switch 2 amp meter digital type 3 rpm meter digital type 5 mcb 6 main switch supply cord with pin top all components fit on panel, motor type pulse generation type power output 15 watts voltage 230v ac frequency 50or 60 hz speed 1500 rpm efficiency high efficiency control type integrated pulse generator for precise control cooling air cooled or fan cooled mounting type flange or base-mounted, motor type capacitor start induction motor power output 1 horsepower hp voltage 230v ac frequency 50or 60 hz speed 1440 to 1500 rpm revolutions per minute phase single phase starting method capacitor start capacitor typically 60 80 micro f microfarads for starting mounting type foot mounted or flange-mounted cooling air cooled, motor type ac induction motor power output 2 horsepower hp voltage 400v ac frequency 50 hz phase 3 phase speed 1440 to 1500 rpm revolutions per minute mounting type foot mounted or flange mounted cooling air cooled with fan, cylinder capacity 5 kg lpg cylinder material high-quality steel valve standard lpg valve with safety features torches type air-lpg brazing torches material brass or stainless steel nozzles interchangeable 5 nozzles for different flame sizes ignition automatic ignition hoses length typically 5 meters material high-pressure resistant rubber connections standard lpg fittings with secure clamps stand material metal or durable plastic design stable base with a holder for the cylinder and torch accessories regulator pressure regulator for precise control safety equipment safety goggles gloves and flame arrestors, capacity 200 litres and above features handle toughened glass shelves warranty card included refrigerant r 600a energy rating three star rating additional requirements manufacturer authorization required, capacity 300 to 350 litres type inverter type refrigerant hc r-600a energy rating three star rating features threeor four doors warranty card included additional requirements manufacturer authorization required, type bench type drill machine hand feed and gear drive type motorized model v belt driven with v pulley rack and pinion for slotted swivel table and base swivel table mounted on a sturdy c i arm with locking system drilling capacity 20 mm spindle nose mt 2 spindle travel 125 mm surface 200 mm rpm 200-2500 motor 1 hp 1440 rpm 3 phase 440 vac drill chuck with arbor mt2 and key 20 mm capacity accessories pump motor 0 1 hp with coolant tank and its complete fittings suitable starters switch for motors and electrical fittings drill machine vice 100 mm jaw drill drift service tool kit allen keys and spanners as per machine safety guard of motor and pulley, type pedestal grinding machine with a standard size fabricated pedestal stand wheel double ended heavy duty wheel size 200 x 25 mm rough and smooth electric motor power 0 5 hp phase 3 phase voltage 440v speed 3000 rpm running speed winding copper wire attachments twist drill grinding attachment tool rest adjustable tool rest on both sides control switch onor off four-position rotary triple pole control switch, components rotary two-stage vacuum pump and motor features gas ballast and anti-suck back capability pulling vacuum up to 50 microns of hg connection for vacuum hold test with solenoid valve and switch manifold with gauges and valves capability pulling vacuum up to 50 microns of hg weighing scale type digital capacity 10 kg additional features supplied with 3 charging lines 1 metre each instruction manual included, two stage rotary vacuum pump evacuation capability capable of evacuating to 50 microns of hg features fitted with gas ballast anti-suck back valve motor single phase motor, type window a c 1 ton with remote trainer with fault simulation unit components 1 compressor new reciprocating sealed compressor certified by the principal manufacturer with a warranty card and serial number capacity 1 ton 2 condenser air-cooled compatible with 1 ton compressor 3 condenser cooling fan compatible capacity permanent lubricated motor 4 expansion device capillary tube with compatible capacity 5 evaporator compatible with 1 ton made of copper tube and aluminum fins fitted with a compatible capacity fan 6 lp and hp pressure cut out switch 7 pressure gauges glycerine filled suction and discharge gauge 8 safety control overload and overcurrent protection for compressor with time delay circuit 9 temperature sensor digital temperature controller 10 temperature measurement digital temperature indicator with multi-channel switch 11 ampere meter and voltmeter for measurement of voltage and current 12 energymeter for measurement of energy consumption 13 other accessories hand shut off valves filter drier thermostat pressure gauges fault simulation there should be a fault switch bank of a minimum of 7-8 standard faults by inserting these faults the effects on the system can be studied mounting all accessories will be mounted on a rigid base frame made of m s mild steel pipe and g i galvanized iron powder-coated paint additional requirement manufacturer authorization required, type 1 5 ton split ac trainer with a fault-finding simulator capacity 1 5 ton refrigerant eco-friendly varies by model compressor type reciprocating or equivalent components and features 1 compressor new reciprocating or similar compressor manufacturer certified with warranty suitable for 1 5 ton capacity 2 condenser air-cooled with compatible capacity for 1 5 ton system 3 evaporator copper tube with aluminum fins compatible capacity fan 4 expansion device capillary tube or equivalent 5 controls and instruments lp and hp pressure cut-out switches glycerine-filled pressure gauges suction and discharge digital temperature indicator with multi-channel switch ampere meter and voltmeter for electrical measurements energymeter for energy consumption measurement 6 safety features overload and overcurrent protection with time delay circuit fault switch bank with multiple fault simulations typically 7-8 faults accessories hand shut-off valves filter drier thermostat construction mounted on a sturdy base frame usually m s pipe and g i powder-coated sheet additional considerations training and educational use designed for training purposes to simulate real-world faults and system responses manufacturer authorization required, a working model of a ductable split a c 1 5 ton trainer with fault simulation and eco-friendly refrigerant includes the following capacity 1 5 tons compressor type reciprocating compressor for durability and reliability in training environments refrigerant eco-friendly refrigerant to comply with environmental regulations and promote sustainability fault simulation integrated fault simulation system with various simulated faults for training purposes examples include electrical faults capacitor failure compressor overload refrigerant flow issues sensor malfunctions etc construction robust construction suitable for educational and training environments often with clear panels to visualize internal components and processes air handling unit ahu ductable design with an ahu suitable for ducted installations ensuring efficient air distribution safety features includes safety features such as overload protection emergency shutdown and clear labeling for educational purposes environmental compliance uses eco-friendly refrigerants promoting sustainability and compliance with modern environmental standards, recovery unit with cylinders for cfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included recovery rates components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for cfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, recovery unit with cylinders for hfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for hfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, recovery unit with cylinders for hcfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for hcfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, cassette air conditioner 1 5 ton type cassette air conditioner technology digital inverter technology refrigerant eco friendly copper tubing suction line and liquid line included with insulation mounting indoor unit mounting bracket included outdoor unit mounting bracket included outdoor unit service valve fitted control remote control included warranty warranty card provided manufacturer authorization required, fan coil unit with water valves type fan coil unit fcu water valves includes both 2-way and 3-way valves cooling coil material copper tube configuration two rows air filter included for filtration grill included for air distribution blower motor type suitable single-phase blower motor mounting wall or ceiling-mounted depending on design, shell and tube dx chillers small - 5 ton type shell and tube dx chiller capacity 5 tons approximately tubing material copper number of tubes 32 to 36 outer shell heavy-duty construction length 48 inches diameter 8 inches finned tubes copper fins mounting plates included for installation, small circulating water pump power rating 1 hp type single-phase motor winding material copper certification isi marked or star rating pump type self-priming tank material stainless steel capacity 20 liters inletor outlet provision both fitted on the tank frame metal frame for supporting the pump and tank make and model required, 2-ton rotary hermetic compressor specifications type rotary hermetic compressor capacity 2 tons refrigerant echo friendly voltage 220-240v or 50hz phase single-phase electrical starting accessories includes starter capacitor relay and other necessary components for proper operation, bottle cooler visible 200 l capacity general specifications inner volume minimum 200 litres refrigerant eco-friendly refrigerant compressor reciprocating compressor certified by the principal manufacturer with warranty card evaporator forced convection type lighting internal cabinet light for visibility warranty includes warranty card manufacturer authorization required detailed components compressor type reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number evaporator type forced convection interior and exterior inner and outer body made of durable food-grade materials for safety transparent door made of tempered glass for visibility durable construction for long-term use lighting internal led light for better visibility of contents temperature control digital thermostat for temperature control additional features lockable door for security energy-efficient operation noise reduction technology warranty includes warranty card for compressor and other critical components manufacturer authorization manufacturer authorization required, deep freezer 200 l capacity general specifications inner volume minimum 200 litres refrigerant eco friendly refrigerant temperature range up to minus 18 degree c compressor reciprocating compressor certified by the principal manufacturer with warranty card detailed components compressor type reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number temperature control digital thermostat for precise temperature control temperature range up to minus 18 degree c cooling system efficient cooling system with rapid cooling capabilities high quality insulation to maintain consistent temperature interior and exterior inner and outer body made of food grade materials for safety durable construction for long term use warranty includes warranty card for compressor and other critical components manufacturer authorization manufacturer authorization required, display cabinet 2 ton capacity general specifications cabinet material food grade stainless steel and transparent toughened glass cabinet dimensions length 6 ft width 27 inches height 4 ft with round glass shelves 2 shelves and 1 bottom shelf made of food grade stainless steel back door sliding back door with glass components compressor type new reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number capacity 2 ton thermostatic expansion valve suitable size for the system condenser type air cooled condenser fan heavy duty energy efficient new fan motor with copper winding and condenser housing, water cooler storage type 200 liters general specifications storage capacity 200 liters cooling capacity 150 liters per hour compressor type reciprocating compressor refrigerant charged with echo friendly refrigerant construction material structure and tank made of food-grade stainless steel insulation tank with puf insulation tank lid equipped with a lock facility, water dispenser bubble type hot and cold general specifications delivery capacity 2 5 to 3 liters per hour cabinet capacity up to 20 liters functions hot cold and normal water dispensing display led display indicator hot water dispensing equipped with a lock for safety refrigerant charged with echo friendly refrigerant construction type floor-mounted faucets 3 faucets for dispensing water bottle supply unit supplied with a 20 liter transparent food-grade bottle, ice candy plant 2 ton capacity specifications capacity 2 ton temperature range 20 c to minus 30 degree c ice candy production capacity to make 32 ice candies at a time with forma tray construction stainless steel tank on trolley puff insulated stainless steel body compressor type hermetic reciprocating compressor capacity 2 ton certification tested and certified by principal manufacturer with warranty card and serial number condenser type air-cooled capacity 2 ton features heavy duty fan copper tube and aluminum fins housing brine cooling system material stainless steel with lid and lid holding angle features window for brine filling and drainage with valve facilities thick insulation agitator motor agitator water pump food grade stainless steel tank and cooling coil made of copper tube forma tray food grade stainless steel minimum 32 candy capacity proper fixing system in brine tank expansion device arrangement thermostatic expansion valve with hand shut off valve controls and gauges hp and lp cut out switch liquid line indicator receiver with inlet and outlet valve solenoid valve solid core filter drier suction accumulator pressure gauge glycerin type compound gauge glycerin type thermostat digital type hydrometer digital type temperature meters digital led type for brine temperature discharge line temperature and suction line temperature amp meter digital type energy meter digital type voltmeter digital type mcb 2 pole as a main switch with supply cord and pin top fault detection minimum eight faults switch bank for detecting various operational faults additional features heavy duty iron frame control panel fitted on powder coated g i sheet system charged with refrigerant instruction manual with fault finding wiring diagram maintenance tips and brine condition for different temperatures, air conditioning indirect system water cooled with humidity control general specifications cooling capacity 2 tons components compressor type reciprocating sealed compressor capacity 2 tons, compressor type new wobble plate type make and model number to be provided condenser type parallel flow type suitable for cars evaporator type serpentine type components thermostatic expansion valve blower motor and grill receiver features with sight glass and other necessary accessories controls type all ideal controls and safety controls for car aor c electric motor type suitable single-phase electric motor isi marked copper winding to run the compressor make and model number to be provided dc power supply components powered condenser fan evaporator fan and magnetic clutch of the compressor fault switch bank type includes standard faults like compressor clutch fault evaporator fan fault condenser fan fault etc additional accessories components onor off switch fan speed selector switch complete wiring jack and clips digital temperature indicator included in the test chamber test chamber size 3x3x6 ft lxwxh construction made of 18mm sun mica board with a door facility size 3x6 ft in an angle iron frame with an inspection glass window 1 5x2 ft towards the aor c unit condition system in running condition with refrigerant charged, specifications automobile bus aor c compressor type new automobile bus aor c compressor make and model number to be provided condenser type parallel flow type designed for buses fans two axial dc fans cooling coil type suitable for buses components expansion valve two blower motors six small grills mounting mounted on the test chamber receiver features with sight glass and all necessary accessories control and safety controls all ideal control and safety controls electric motor type suitable new electric motor with copper winding to run the compressor make and model number to be provided dc power supply components powered condenser fan evaporator blower and magnetic clutch of the compressor additional accessories components onor off switch fan speed selector switch complete wiring and a digital temperature indicator in the test chamber fault switch bank includes six standard faults like compressor clutch fault evaporator blower fault condenser fan fault thermostat fault test chamber size 8x4x6 ft lxwxh construction blower housing made of sunmica board with door facility in an angle iron frame with inspection glass window mounting complete system fitted on a four wheeled heavy duty steel trolley condition system in running condition with refrigerant charged, automatic ice cube machine with a capacity of 50 to 55 kg per day specifications capacity 50 to 55 kg of ice cubes per day control panel digitally controlled touch screen panel storage capacity 14 kg to 27 kg of ice cubes cooling method fan-cooled water connection facility for connection with a tap or direct water line body material stainless steel for durability and easy maintenance compressor energy-efficient charged with eco-friendly refrigerant special features automatic stop and start noiseless operation compact and elegant design storage bin in built manufacturer authorization required with a guarantee card, 2 5 inch x4 inch with stand, 6 inch x3 inch providing with hanging clip top and bottom plate, parameter generic technical specification processor intel i3 4 core or higher with minimum turbo boost 2 4 ghz or higher base frequency 12 mb cache or higher with 14th or higher generation and to be certified by oem chipset compatible chipset operating system 1 pre-installed oem certified genuine microsoft windows 11 professional 64 bit or higher memory ram 8 gb or higher ddr5 4400 mhz or higher with 64 gb expandability storage 512 gb ssd graphics integrated hd graphic card or highe ports minimum 5 usb ports with at least 2 usb 3 0 or higher ports hdmi display port audio jack for headphone and microphone display minimum 21 inch or higher resolution 1600x900 or higher display antivirus minimum 3 years subscription antivirus with protection for ransomware browsing phishing along with oem undertaking to be provided model specific certification bis for monitor only keyboard and mouse usb keyboard and usb two button optical mouse same make as desktop and mouse pad network interface integrated 10or 100or 1000 gb ethernet integrated 802 11ac wi-fi and bluetooth 5 0 or higher form factor smallor slim form factor or minior micro tower accessories all necessary cables expansion slots minimum two pcie slots warranty 3 years comprehensive on site oem warranty and it should be mentioned on the oem website and it should be mentioned on the oem, parameter generic technical specification technology dlp projection method front and rear both minimum resolution xga 1024 x 768or wxga 1280 x 800 brightness minimum 3300 ansi lumens for color light and white light output both contrast ratio 15000 1 aspect ratio minimum 4 3 lamp type uhe lamp life minimum 6000 hrs normal mode and 12000 hrs in eco mode wireless connectivity bluetooth and integrated wi-fi ior o connection vga hdmi usb warranty 3 years comprehensive on site oem warranty and it should be mentioned on the oem website, processor intel i3 minimum 4 core or higher with minimum turbo boost 2 4 ghz or higher base frequency, material mild steel powder coated or paint coated product type free standing unit with glass panel
Agency / Dept :
department of technical education DTE
Due Date :
Jul 13, 2026
Tender Value :
32.07L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16247630
Location : bangalore , karnataka
tender for re-metaling, reconditioning and replacement of cooling water jackets of released turbine guide bearing (tgb) shells of sharavathy generating station, noting of scheme of arrangement in the existing bearing. sand blasting and cleaning of old babbitt material completely. re-metalling and machining of complete tgb shell as per the existing scheme of arrangement. oil grooves cuttings and surface tapering at exact angles as per drawings supplied by kpcl. removing and dismantling of cooling water jackets provided in the two halves of the tgb shell and thorough cleaning of cooling water jackets provided in the two halves of the tgb shell. plugging the holes and arresting water leakage in the water jacket cooling system and pressure testing of 5kg/cm2. scraping, cleaning the old paint and painting of fresh anti corrosive oil-resistant paint on the outer surface of the tgb shells.all threaded stud holes should be cleaned by using proper tappings before dispatch. tgb shell should be clean and free from babbitt spray on any outside surface of the shell before dispatch. tgb shell should be clean and free from babbitt spray on any outside surface of the shell before dispatch. loading & transportation of tgb shells from sgs shall be the responsibility of contractor account. detailed scope of work as per section-iii technical specification and scope of work of tender documents.
Agency / Dept :
karnataka power corporation limited KPCL
Due Date :
Jul 27, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Free Cooling Arrangement. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Free Cooling Arrangement sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Free Cooling Arrangement Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Free Cooling Arrangement, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Free Cooling Arrangement Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Free Cooling Arrangement Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Free Cooling Arrangement.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Free Cooling Arrangement depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Free Cooling Arrangement Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Free Cooling Arrangement bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Free Cooling Arrangement. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Free Cooling Arrangement, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Free Cooling Arrangement, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Free Cooling Arrangement?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Free Cooling Arrangement tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Free Cooling Arrangement?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Free Cooling Arrangement, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Free Cooling Arrangement is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All