sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

10Latest Fabricated steel arm Tenders List

Latest Fabricated steel arm Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Fabricated steel arm tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Fabricated steel arm tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Fabricated steel arm Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Fabricated steel arm tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Fabricated steel arm Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Fabricated steel arm Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Fabricated steel arm Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Fabricated steel arm tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Fabricated steel arm Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Fabricated steel arm sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Fabricated steel arm tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Fabricated steel arm tenders.

Is EMD mandatory for all Fabricated steel arm tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Fabricated steel arm work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Fabricated steel arm tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Fabricated steel arm Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17520397
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , s and fixing internal hydrant valve , supply and fixing of external yard hydrant valve , sfc of butterfly valve , s and fixing of orifice plate , pitc non return valve , pitc of stainless steel y strainer , s and fixing of 15 m hose pipe , s and fixing first aid hose reel , s and fixing 63 mm dia gun metal short branch pipe , s and fixing of fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , installation control valve of cast iron body , s and f of hose cabinet , cutting holes , supply of cable , laying of cable , s and m end termination , s and f fire cable , cable tray , g i plate earthing , p and f gi strip , gi strip for looping , p and f gi earth wire , p and f gi pipe, supply installation testing and commissioning of firefighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of die sel engine driven main fire pump conforming to is 12469 019 suitable for automatic operation and consisting of following, complete in all respects, as required diesel driven pump b horizontal pe, stage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe xtended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential ilencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as quired. e suitable cement concrete foundation duly plastered and with anti vibration pads. note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head., jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads. note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects, as required terrace pump. b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head., control panels fabrication supply installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required. incoming 250a, 50ka 4 pole mccb, ic equal to 100 percent icu rating digital voltmeter 0 500v with selector switch digital ammeter 0 250 a with selector swtich and cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 300a. outgoing note all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps main fire pump 125 a, 50katpn mccb, ics is equal to 100 percent icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. jockey pump jockey pump 63 a, 50ka tpn mccb, icsis equal to 100 percent icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, note may please be see at atc of special repair no. 5, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories. providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc. conforming to is 636 type a as required. gun metal, supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. gun meta, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 4 way 150 mm dia m.s. pipe, providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia, supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750x mm x 600 mm x 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15x15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
59.95L
View Documents
T18 Ref No : 17758474
Location : tinsukia , assam
Source : GEM Tenders
LIVE TENDER
tender for gun maintenance mechanism trainer - main base frame , base longitudinal member , base cross member , main vertical support , vertical side support plates , hydraulic cylinder , hydraulic cylinder body , hydraulic ram capacity , hydraulic pump , pump operating lever , main pulling arm , pulling arm pivot pin , secondary link , connecting link , pulling chain , chain connection shackle , holding hook , main equipment cradle , cradle base plate , cradle side plate , adjustable clamp , main locking pin , secondary locking pin , adjustable screw , adjustable hand wheels , main transport wheels , support wheel , main wheel axle , support wheel axle , outrigger arm , stabilizer vertical post , stabilizer foot , stabilizer operating handle , hydraulic hose , hydraulic pipe , structural gusset plates , main load bearing plates , general brackets , pivot bush , safety retaining pins , fasteners, gun maintenance mechanism trainer, heavy duty ms rectangular or square section, ms square or rectangular hollow section, ms square or rectangular section, heavy duty ms fabricated section, ms plate, heavy duty hydraulic cylinder, seamless or heavy duty steel cylinder, suitable hydraulic ram, manual hydraulic pump, ms tubular or solid operation handle, heavy duty fabricated ms rectangular section, high strength steel pin, ms flat or plate fabricated member, heavy duty ms flat, heavy duty rated steel chain, rated steel bow or d shackle, forged or rated steel hook, fabricated ms plate or section, ms plate, heavy duty ms fabricated clamp, high strength steel, high strength threaded steel rod, ms or steel fabricated hand wheel, heavy duty steel or pu or rubber wheel, heavy duty wheel, solid en8 or equivalent steel shaft, solid steel shaft, ms tubular fabricated member, ms tube or solid fabricated member, ms tubular handle, high pressure hydraulic hose, high pressure rated steel fittings, hardened steel or phosphor bronze or equivalent, high strength steel with r-clip or cotter, high tensile nuts and bolts
Agency / Dept :
indian army
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
1.02L
View Documents
T18 Ref No : 16902940
Location : baramulla , jammu & kashmir
Source : GEM Tenders
tender for truss and purline , ms self taping with washer screw 10x75mm , ms self taping with washer screw 10x 25mm , ms self taping with washer screw 10x 100mm , aluminium pop rivet 25mm 1000 nos , peg set ss frame 450x60x12 mm , silicon sealant 280 ml dr fixit 501 is 12118 pt1 1987 , paints for site touch up construction team use only , column rhs 100x100x5mm thick conforming to length 2.6m , side bracing isa 50x50x5mm thick conforming to length 2.9m , base plate size 250 x 250x12mm , top frame work of staging rhs 100x100x4mm length 2m , top cross member for stage platform rhs 75x50x3mm length 2.82m , top chequered plate for staging platform size 2m x 2m , cement opc 43 grade in hdpe bag of 50 kg each , aggregate 20mm , aggregate 40mm , manufacture sand m sand , pcc solid blocks 400x200x200 mm , white cement , non skid ceramic tiles size 300x300mm x 10mm mm thick 1st quality , 25mm thick factory made chequered tiles of size 300mm x 300mm , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm for steel as main bars and 8 mm dia , quick setting compound rapidite , liquid water proofing compound is 2645 2003 , 10mm dia reinforcement for water staging foundation , pvc ceiling rose 2 3 terminal , led tube light fitting 1 x 12 w 2 ft long complete with all accessories , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm , xlpe insulated pvc seathed heavy dutynarmoured multi core cable 16 sqmm 2 core , modular switch one way 6 amps one module , white cover plate with frame 2 module , white cover plate with frame 3 module , pvc flush box 2 module , pvc flush box 3 module , mcb double pole 230v ac 50 hz 16 amps 10ka , mcb distribution board in sheet metal enclosure two ways with blanks , ms screw 20 mm full threaded , tape insulation 2 cm width 10 mtr long isi marked , pvc casing caping 25 mm x 16mm is 14927 , pvc casing caping square box 4 inch x 4 inch as per is 14927 , 3 layer pp-r polypropylene random copolymer , 20mm elbow suitable for 20 mm dia pp r pipe , 20mm socket suitable for 20mm dia pp r pipes , 20mm equal tee suitable for 20mm dia pp r pipe , 20mm union suitable for 20mm pp r pipes , ppr femel threaded reducer socket 15 20mm , ppr femel threaded reducer elbow 15 20 mm , pp r end plug 20mm , pp r pipe clamps suitable for 20mm piping , cp angle cock 2 way 20mm , cp angle cock 20mm , cp stop cock 20mm , bib tap short body cp 20mm bore suitable for ppr water supply line , pp r tank connector 20mm with check nut and washer , supply of 2000 litre capacity pvc rotational moulded polyethylene water storage tank , snow white colour ewc with s or p trap concealed of size 650x405x770mm wih sheet cover , vitreous china squatting pan orissa pattern size 580 x 440 mm white with integral foot rests , pvc valve less syphonic action type low level flushing cistern 10 ltrs capacity , ceramic wash basin snow white oval bowl type with full pedestal height 795mm size 550 x 400 x 155mm , 600mm x 450mm looking mirror cabinet with pvc moulded frame , cp over head shower without arm , cp soap dish for one soap , cp toilet paper holder , cp health faucet 15 mm dia pipe with 1.25 metre , wash basin mixer tap hot and cold , brass chromium plated bib cock long body 15mm , teflon tape , 110 x 110mm cp nahani trap with jali , pvc swr floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith cp grating . , 75mm bore pvc swr soil, supply and construction of combined bathroom toilets, unit of external size 4.30 m x 4.30 m, size 96mm x 48 mmx 3.6 mm 8.00 kg rm with 1 2 slopes, fabricated out of rectangular steel hollow sections conforming to is 4923 2017, ends 45x90x6mm with two holes of dia 12mm, purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm, extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm, sun shade frame with sheet sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet, roofing sheets 0.50 mm thick ppgi camouflage pattern of, false ceiling supporting angle ms 65x65xx5mm for placing of puf 400mm thick length 4180mm, false ceiling supporting l section of 50 x 50 x 5mm thick, wall puff panel of size 1000 w x 3000 ht 40 mm 0.50 mm colour coated gi both sides, partition wall puff panel of size 1000 w x 3000 ht 40 mm 0.50 mm colour coated gi both sides, puff panel for ceiling portion of size 1000 w x 3000 ht 40 mm 0.50 mm colour coated gi both sides, main external door size 1000x2100mm 2mm thick aluminium frame shutter 40 mm puf, internal door size 750x2100mm 2 mm thick aluminium frame, fixed upvc window 100x450mm installed at 2.1 m for ffl, ventilators with exhaust fan 250 mm sweep, inner corner flashing 50x50x3000mm 0.5mm thick, bird cover flashing 50x250x3000mm 0.5mm thick, outer corner 3100mm x 200mm x 200mm, ridge cover 2400mm x 300x300mm, top and bottom u flashing 40x40x65x1.5mm thick 3000mm long, ms foundation nut and bolt 16x450mm incl water tank staging., ms nut and bolt with washer 12x50mm for coln and truss connection, ms nut and bolt with washer 12x100mm for connecting truss and purline, ms self taping with washer screw 10x75mm, ms self taping with washer screw 10x 25mm, ms self taping with washer screw 10x 100mm, aluminium pop rivet 25mm 1000 nos per packet, peg set ss frame 450x60x12 mm, silicon sealant 280 ml dr fixit 501 is 12118 pt1 1987, paints for site touch up construction team use only, column rhs 100x100x5mm thick conforming to length 2.6m, side bracing isa 50x50x5mm thick conforming to length 2.9m, base plate size 250 x 250x12mm, top frame work of staging rhs 100x100x4mm length 2m, top cross member for stage platform rhs 75x50x3mm length 2.82m, top chequered plate for staging platform size 2m x 2m, confirming to relevant is 8112 2013. as per is is 8112 2013, stone aggregate to be crushed rock or gravel 20mm graded confirming to is 383 2016, confirming to relevant is 383-2016, pcc solid blocks 400x200x200 mm, white cement, non skid ceramic tiles size 300x300mm x 10mm mm thick 1st quality, 25mm thick factory made chequered tiles of size 300mm x 300mm, prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm for steel as main bars and 8 mm dia, quick setting compound rapidite is 2185 2005., liquid water proofing compound is 2645 2003, 10mm dia reinforcement for water staging foundation, pvc ceiling rose 2 3 terminal, led tube light fitting 1 x 12 w 2 ft long complete with all accessories, cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm, xlpe insulated pvc seathed heavy dutynarmoured multi core cable 16 sqmm 2 core, modular switch one way 6 amps one module, white cover plate with frame 2 module, white cover plate with frame 3 module, pvc flush box 2 module, pvc flush box 3 module, mcb double pole 230v ac 50 hz 16 amps 10ka, mcb distribution board in sheet metal enclosure two ways with blanks, ms screw 20 mm full threaded, tape insulation 2 cm width 10 mtr long isi marked, pvc casing caping 25 mm x 16mm is 14927, pvc casing caping square box 4 inch x 4 inch as per is 14927, 3 layer pp-r polypropylene random copolymer, 20mm elbow suitable for 20 mm dia pp r pipe, 20mm socket suitable for 20mm dia pp r pipes, 20mm equal tee suitable for 20mm dia pp r pipe, 20mm union suitable for 20mm pp r pipes, ppr femel threaded reducer socket 15 20mm, ppr femel threaded reducer elbow 15 20 mm, pp r end plug 20mm, pp r pipe clamps suitable for 20mm piping, cp angle cock 2 way 20mm, cp angle cock 20mm, cp stop cock 20mm, bib tap short body cp 20mm bore suitable for ppr water supply line, pp r tank connector 20mm with check nut and washer, supply of 2000 litre capacity pvc rotational moulded polyethylene water storage tank, snow white colour ewc with s or p trap concealed of size 650x405x770mm wih sheet cover, vitreous china squatting pan orissa pattern size 580 x 440 mm white with integral foot rests, pvc valve less syphonic action type low level flushing cistern 10 ltrs capacity, ceramic wash basin snow white oval bowl type with full pedestal height 795mm size 550 x 400 x 155mm, 600mm x 450mm looking mirror cabinet with pvc moulded frame, cp over head shower without arm, cp soap dish for one soap, cp toilet paper holder, cp health faucet 15 mm dia pipe with 1.25 metre, wash basin mixer tap hot and cold, brass chromium plated bib cock long body 15mm, teflon tape, 110 x 110mm cp nahani trap with jali, pvc swr floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith cp grating ., 75mm bore pvc swr soil waste and vent pipe in any length with rubber joints, 110mm bore swr pipes single socketed in any length with rubber ring joints, 75mm 110mm pvc swr reducer complete all as specified as per, complete all as specified as per is 14735 1999, pvc swr bend any radius 110mm bore complete all as specified and directed as per, 75mm pvc swr vent cowl complete all as specified, ppr gate valves, with iron wheel head, screwed both end for ppr pipe and fixed to 20 mm bore, anaerobic advance septic tank capacity of 1500 ltr, 110mm dia upvc pipe single socketed, pvc sw elbow 110mm dia, pvc swr 110mm dia socket, pvc swr 110mm dia t equal, pvc swr 75mm dia pipe length 3 mtrs 10 ft long, pvc swr 75mm dia elbow, pvc swr 75mm dia socket, pvc swr 75mm dia t equal, pvc pipe fittings solution 250 ml, stainless steel hamam tank ss 1000 ltrs
Agency / Dept :
indian army
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17415585
Location : khamanon , punjab
Source : GEM Tenders
corrigendum tender for conference table 32 seater , conference chair , chemistry lab table , library almirah steel glass front cabinet , lecture stand , notice board , honor board, procurement of different furniture items, conference table 32 seater providing, supplying and placing in position conference table. table shall be u shape with depth of each modular unit being 600 mm and total length of 10300 mm with tolerance plus 5mm to minus 5 mm. the work surface shall be made of 25mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and shall be edge banded with matching 2mm thick pvc lipping. plastic abs access flaps shall be provided on the work surface for easy access to wires and cables. the under structure shall be made of 18mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. aluminium alloy 63400 wp profiles shall be used for connecting the panels and the product shall have knock down construction. the modesty panel shall be made of 18mm thick pre laminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. a powder coated accent metal strip shall be provided below the work surface for enhanced aesthetics, manufactured from 0.8mm thick crca steel conforming to is 513 and finished with epoxy polyester powder coating having a dry film thickness of 40 to 60 microns. the wire management system shall consist of an array of panels made from 0.8mm thick crca mild steel conforming to is 513 and finished with epoxy polyester powder coating of 40 to 60 microns dft for routing of wires and cables. provision shall be provided below the worktop for mounting an anchor roma 6 module plate. a cut out on the worktop fitted with a two piece injection moulded plastic polymer component shall be provided to facilitate routing of audio and video cables onto the work surface and connection of device chargers to the power socket mounted below the worktop. the product should have following certifications, cii greenpro,ul greenguard,ul,griha,scs indoor advantage gold,bis is 17633 2022, providing, supplying and placing in position revolving chair. the seat shall be injection moulded in glass filled polypropylene compound and upholstered with fabric upholstery covers and moulded polyurethane foam. the back shall be injection moulded in glass filled polypropylene compound and upholstered with mesh fabric. the seat size shall be 500 mm width x 480 mm depth and the back size shall be 530 mm w x 390 mm h with tolerance plus 5mm to minus 5mm. the high resilience hr polyurethane seat foam shall be moulded with density 45 plus minus 2 kg per metre cube and hardness 16 plus minus 2 kgf as per is 7888 for 25 percent compression. the powder coated welded tubular understructure shall be made from diametre 25.4 plus minus 0.3 mm x 2.0 plus minus 0.16 mm and dia19.0 plus minus 0.3 mm x 1.2 plus minus 0.096 mm m.s. erw tubes with powder coating thickness of 50 plus minus 10 microns. the arm rests shall be made of glass filled polypropylene compound and assembled over the tubular frame. the chair shall be provided with a 360 degree revolving base plate mechanism with height adjustment feature. pneumatic seat height adjustment shall have a stroke of 120 plus minus 3 mm. the pedestal assembly shall be fabricated from 2.0 pus minus 0.2 mm thick hr sheet conforming to is 1079 hr, powder coated with dft 40 to 60 microns, and fitted with an injection moulded black polypropylene hub cap and five twin wheel castors. the pedestal shall have a pitch centre diameter of 600 plus minus 5 mm 700 plus minus 10 mm with castors. the twin wheel castors shall be injection moulded in black polyamide. the overall dimensions of the chair shall be 700 mm wx 700 mm d x 855 to 975 mm h with seat height adjustable from 430 mm to 550 mm. the product should have following certifications, ul greenguard,scs indoor advantage gol, as per atc, providing, supplying and placing in position glass door storage unit of overall size 916 mm w x 486 mm d x 1981 mm h, with tolerance plus minus 5mm. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm high yield strength and all other components shall have a thickness of 0.9mm. these components shall be made of crca d grade high yield strength as per is 513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns plus minus 10. plenty of colour options and shelving options shall be available. the product should have following certifications scs indoor advantage gold,bis is 17634 2022, product size width 545mm, depth 650mm, height with castor 1020mm with tolerance plus minus 5mm. construction rigid knock down construction. material side panels, top bottom panels, back panel, shelf panels, work surface panel, door and support frame panel are made from 18mm thick pre laminated board of e1 p2 grade and approved shade confirming to is 12823 1990 with 1.3mm pvc edge lipping.2 platforms are provided. provision for the grommet is provided on the top panel, work surface panel and back panel for better wire management. lockable storage space with shelf is provided for storage of essential equipments. base plate assembly dia 20mm ms rod bushes are fabricated by argo shield welding on 8mm thick hr is 2062 plate and then powder coated. lockable castors are mounted onto the base plate assembly for ease of motion, notice board size 6 feetx 4 feet with tolerance plus minus 5mm. made up of soft cork sheet of 12 mm thickness covered with velvet red cloth, supported on the back with laminate of mica sheet. the entire board shall be framed with in a specially extruded aluminum channel color dark brown with nylon corner edges. the board shall be fixed with square plates and slots for mounting in horizontal or vertical directions., standard honour boards roll of honour displays typically measure heigh 1500 mm 5 ft width 900 mm 3 ft thickness 25 to 35 mm. constructed using 6 mm acrylic, polished wood like oak. hardwood timber frames such as solid oak or walnut with an mdf or laminated backing
Agency / Dept :
department of technical education and industrial training
Due Date :
Sep 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17460613
Location : khamanon , punjab
Source : GEM Tenders
corrigendum tender for conference table 32 seater , conference chair , chemistry lab table , library almirah steel glass front cabinet , lecture stand , notice board , honor board, procurement of different furniture items, conference table 32 seater providing, supplying and placing in position conference table. table shall be u shape with depth of each modular unit being 600 mm and total length of 10300 mm with tolerance plus 5mm to minus 5 mm. the work surface shall be made of 25mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and shall be edge banded with matching 2mm thick pvc lipping. plastic abs access flaps shall be provided on the work surface for easy access to wires and cables. the under structure shall be made of 18mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. aluminium alloy 63400 wp profiles shall be used for connecting the panels and the product shall have knock down construction. the modesty panel shall be made of 18mm thick pre laminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. a powder coated accent metal strip shall be provided below the work surface for enhanced aesthetics, manufactured from 0.8mm thick crca steel conforming to is 513 and finished with epoxy polyester powder coating having a dry film thickness of 40 to 60 microns. the wire management system shall consist of an array of panels made from 0.8mm thick crca mild steel conforming to is 513 and finished with epoxy polyester powder coating of 40 to 60 microns dft for routing of wires and cables. provision shall be provided below the worktop for mounting an anchor roma 6 module plate. a cut out on the worktop fitted with a two piece injection moulded plastic polymer component shall be provided to facilitate routing of audio and video cables onto the work surface and connection of device chargers to the power socket mounted below the worktop. the product should have following certifications, cii greenpro,ul greenguard,ul,griha,scs indoor advantage gold,bis is 17633 2022, providing, supplying and placing in position revolving chair. the seat shall be injection moulded in glass filled polypropylene compound and upholstered with fabric upholstery covers and moulded polyurethane foam. the back shall be injection moulded in glass filled polypropylene compound and upholstered with mesh fabric. the seat size shall be 500 mm width x 480 mm depth and the back size shall be 530 mm w x 390 mm h with tolerance plus 5mm to minus 5mm. the high resilience hr polyurethane seat foam shall be moulded with density 45 plus minus 2 kg per metre cube and hardness 16 plus minus 2 kgf as per is 7888 for 25 percent compression. the powder coated welded tubular understructure shall be made from diametre 25.4 plus minus 0.3 mm x 2.0 plus minus 0.16 mm and dia19.0 plus minus 0.3 mm x 1.2 plus minus 0.096 mm m.s. erw tubes with powder coating thickness of 50 plus minus 10 microns. the arm rests shall be made of glass filled polypropylene compound and assembled over the tubular frame. the chair shall be provided with a 360 degree revolving base plate mechanism with height adjustment feature. pneumatic seat height adjustment shall have a stroke of 120 plus minus 3 mm. the pedestal assembly shall be fabricated from 2.0 pus minus 0.2 mm thick hr sheet conforming to is 1079 hr, powder coated with dft 40 to 60 microns, and fitted with an injection moulded black polypropylene hub cap and five twin wheel castors. the pedestal shall have a pitch centre diameter of 600 plus minus 5 mm 700 plus minus 10 mm with castors. the twin wheel castors shall be injection moulded in black polyamide. the overall dimensions of the chair shall be 700 mm wx 700 mm d x 855 to 975 mm h with seat height adjustable from 430 mm to 550 mm. the product should have following certifications, ul greenguard,scs indoor advantage gol, as per atc, providing, supplying and placing in position glass door storage unit of overall size 916 mm w x 486 mm d x 1981 mm h, with tolerance plus minus 5mm. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm high yield strength and all other components shall have a thickness of 0.9mm. these components shall be made of crca d grade high yield strength as per is 513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns plus minus 10. plenty of colour options and shelving options shall be available. the product should have following certifications scs indoor advantage gold,bis is 17634 2022, product size width 545mm, depth 650mm, height with castor 1020mm with tolerance plus minus 5mm. construction rigid knock down construction. material side panels, top bottom panels, back panel, shelf panels, work surface panel, door and support frame panel are made from 18mm thick pre laminated board of e1 p2 grade and approved shade confirming to is 12823 1990 with 1.3mm pvc edge lipping.2 platforms are provided. provision for the grommet is provided on the top panel, work surface panel and back panel for better wire management. lockable storage space with shelf is provided for storage of essential equipments. base plate assembly dia 20mm ms rod bushes are fabricated by argo shield welding on 8mm thick hr is 2062 plate and then powder coated. lockable castors are mounted onto the base plate assembly for ease of motion, notice board size 6 feetx 4 feet with tolerance plus minus 5mm. made up of soft cork sheet of 12 mm thickness covered with velvet red cloth, supported on the back with laminate of mica sheet. the entire board shall be framed with in a specially extruded aluminum channel color dark brown with nylon corner edges. the board shall be fixed with square plates and slots for mounting in horizontal or vertical directions., standard honour boards roll of honour displays typically measure heigh 1500 mm 5 ft width 900 mm 3 ft thickness 25 to 35 mm. constructed using 6 mm acrylic, polished wood like oak. hardwood timber frames such as solid oak or walnut with an mdf or laminated backing
Agency / Dept :
department of technical education and industrial training
Due Date :
Sep 28, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17075415
Location : khamanon , punjab
Source : GEM Tenders
tender for conference table 32 seater , conference chair , chemistry lab table , library almirah steel glass front cabinet , lecture stand , notice board , honor board, procurement of different furniture items, conference table 32 seater providing, supplying and placing in position conference table. table shall be u shape with depth of each modular unit being 600 mm and total length of 10300 mm with tolerance plus 5mm to minus 5 mm. the work surface shall be made of 25mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and shall be edge banded with matching 2mm thick pvc lipping. plastic abs access flaps shall be provided on the work surface for easy access to wires and cables. the under structure shall be made of 18mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. aluminium alloy 63400 wp profiles shall be used for connecting the panels and the product shall have knock down construction. the modesty panel shall be made of 18mm thick pre laminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. a powder coated accent metal strip shall be provided below the work surface for enhanced aesthetics, manufactured from 0.8mm thick crca steel conforming to is 513 and finished with epoxy polyester powder coating having a dry film thickness of 40 to 60 microns. the wire management system shall consist of an array of panels made from 0.8mm thick crca mild steel conforming to is 513 and finished with epoxy polyester powder coating of 40 to 60 microns dft for routing of wires and cables. provision shall be provided below the worktop for mounting an anchor roma 6 module plate. a cut out on the worktop fitted with a two piece injection moulded plastic polymer component shall be provided to facilitate routing of audio and video cables onto the work surface and connection of device chargers to the power socket mounted below the worktop. the product should have following certifications, cii greenpro,ul greenguard,ul,griha,scs indoor advantage gold,bis is 17633 2022, providing, supplying and placing in position revolving chair. the seat shall be injection moulded in glass filled polypropylene compound and upholstered with fabric upholstery covers and moulded polyurethane foam. the back shall be injection moulded in glass filled polypropylene compound and upholstered with mesh fabric. the seat size shall be 500 mm width x 480 mm depth and the back size shall be 530 mm w x 390 mm h with tolerance plus 5mm to minus 5mm. the high resilience hr polyurethane seat foam shall be moulded with density 45 plus minus 2 kg per metre cube and hardness 16 plus minus 2 kgf as per is 7888 for 25 percent compression. the powder coated welded tubular understructure shall be made from diametre 25.4 plus minus 0.3 mm x 2.0 plus minus 0.16 mm and dia19.0 plus minus 0.3 mm x 1.2 plus minus 0.096 mm m.s. erw tubes with powder coating thickness of 50 plus minus 10 microns. the arm rests shall be made of glass filled polypropylene compound and assembled over the tubular frame. the chair shall be provided with a 360 degree revolving base plate mechanism with height adjustment feature. pneumatic seat height adjustment shall have a stroke of 120 plus minus 3 mm. the pedestal assembly shall be fabricated from 2.0 pus minus 0.2 mm thick hr sheet conforming to is 1079 hr, powder coated with dft 40 to 60 microns, and fitted with an injection moulded black polypropylene hub cap and five twin wheel castors. the pedestal shall have a pitch centre diameter of 600 plus minus 5 mm 700 plus minus 10 mm with castors. the twin wheel castors shall be injection moulded in black polyamide. the overall dimensions of the chair shall be 700 mm wx 700 mm d x 855 to 975 mm h with seat height adjustable from 430 mm to 550 mm. the product should have following certifications, ul greenguard,scs indoor advantage gol, as per atc, providing, supplying and placing in position glass door storage unit of overall size 916 mm w x 486 mm d x 1981 mm h, with tolerance plus minus 5mm. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm high yield strength and all other components shall have a thickness of 0.9mm. these components shall be made of crca d grade high yield strength as per is 513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns plus minus 10. plenty of colour options and shelving options shall be available. the product should have following certifications scs indoor advantage gold,bis is 17634 2022, product size width 545mm, depth 650mm, height with castor 1020mm with tolerance plus minus 5mm. construction rigid knock down construction. material side panels, top bottom panels, back panel, shelf panels, work surface panel, door and support frame panel are made from 18mm thick pre laminated board of e1 p2 grade and approved shade confirming to is 12823 1990 with 1.3mm pvc edge lipping.2 platforms are provided. provision for the grommet is provided on the top panel, work surface panel and back panel for better wire management. lockable storage space with shelf is provided for storage of essential equipments. base plate assembly dia 20mm ms rod bushes are fabricated by argo shield welding on 8mm thick hr is 2062 plate and then powder coated. lockable castors are mounted onto the base plate assembly for ease of motion, notice board size 6 feetx 4 feet with tolerance plus minus 5mm. made up of soft cork sheet of 12 mm thickness covered with velvet red cloth, supported on the back with laminate of mica sheet. the entire board shall be framed with in a specially extruded aluminum channel color dark brown with nylon corner edges. the board shall be fixed with square plates and slots for mounting in horizontal or vertical directions., standard honour boards roll of honour displays typically measure heigh 1500 mm 5 ft width 900 mm 3 ft thickness 25 to 35 mm. constructed using 6 mm acrylic, polished wood like oak. hardwood timber frames such as solid oak or walnut with an mdf or laminated backing
Agency / Dept :
department of technical education and industrial training
Due Date :
Sep 18, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17690713
Location : jaipur , rajasthan
auction or scrap of lot no - 01 lot name - gi fabricated structural steel items product type - metal category - iron and steel sub category - steel residue gi fabricated structural steel items v cross arm set and dp line structures set ( ismc, isa and flat) location: m/s larsen & toubro limited ,pt&d lcrdss alwar project , near mewat balika chhatrawas, mannaka village, surya nagar- alwar- 231001 contact: sudhir kumar srivastav - 7024039783 prebid emd of rs.228000/- to mstc ltd, neft/rtgs through pay prebid emd mode from the www.mstcecomm erce.com portal only on or before one day prior to e- auction date
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Oct 08, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17423368
Location : agra , uttar pradesh
Source : GEM Tenders
tender for electrical component , contact component , isolator 145kv female contact , male contact isolator 145kv , female contact isolator 145kv , 145kv copper isolator male , 145kv copper isolator female , smc 145kv isolator male, supply of male and female 245 kv and 145 kv isolator, male arm suitable for 245 kv cgl (pipel type) make isolators its male contact arm shall be fabricated with all. flat. the male jaw and out going terminal rod flexible connection shall be made of copper. the male contact shall have steel spring between jaw fingures, copper parts shall be silver plated and shall be assembled. its contact base to be forced on insultor shall have hole as per modified drawing/sample., female arm suitable for 245 kv cgl (pipe type) make isolators its male contact arm shall be fabricated with all. flat. the male jaw and out going terminal rod flexible connection shall be made of copper. the female contact shall have steel spring between jaw fingures, copper parts shall be silver plated and shall be assembled. its contact base to be forced on insultor shall have hole as per modified drawing/sample., supply of female contact made of copper suitable for rama make 145 kv isolator as per sample., supply of male contact made of copper suitable for rama make 145 kv isolator as per sample., supply of female contact made of copper suitable for g nandi make 145 kv isolator as per sample., supply of male contact made of copper suitable for g nandi make 145 kv isolator as per sample., supply of female contact made of copper suitable for smc make 145 kv isolator as per sample., supply of male contact made of copper suitable for smc make 145 kv isolator as per sample.
Agency / Dept :
uttar pradesh power corporation limited UPPCL
Due Date :
Oct 08, 2026
Tender Value :
4.93L
View Documents
T18 Ref No : 17656627
Location : agra , uttar pradesh
Source : GEM Tenders
corrigendum tender for electrical component , contact component , isolator 145kv female contact , male contact isolator 145kv , female contact isolator 145kv , 145kv copper isolator male , 145kv copper isolator female , smc 145kv isolator male, supply of male and female 245 kv and 145 kv isolator, male arm suitable for 245 kv cgl (pipel type) make isolators its male contact arm shall be fabricated with all. flat. the male jaw and out going terminal rod flexible connection shall be made of copper. the male contact shall have steel spring between jaw fingures, copper parts shall be silver plated and shall be assembled. its contact base to be forced on insultor shall have hole as per modified drawing/sample., female arm suitable for 245 kv cgl (pipe type) make isolators its male contact arm shall be fabricated with all. flat. the male jaw and out going terminal rod flexible connection shall be made of copper. the female contact shall have steel spring between jaw fingures, copper parts shall be silver plated and shall be assembled. its contact base to be forced on insultor shall have hole as per modified drawing/sample., supply of female contact made of copper suitable for rama make 145 kv isolator as per sample., supply of male contact made of copper suitable for rama make 145 kv isolator as per sample., supply of female contact made of copper suitable for g nandi make 145 kv isolator as per sample., supply of male contact made of copper suitable for g nandi make 145 kv isolator as per sample., supply of female contact made of copper suitable for smc make 145 kv isolator as per sample., supply of male contact made of copper suitable for smc make 145 kv isolator as per sample.
Agency / Dept :
uttar pradesh power corporation limited UPPCL
Due Date :
Oct 12, 2026
Tender Value :
4.93L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17661464
Location : agra , uttar pradesh
Source : GEM Tenders
corrigendum tender for electrical component , contact component , isolator 145kv female contact , male contact isolator 145kv , female contact isolator 145kv , 145kv copper isolator male , 145kv copper isolator female , smc 145kv isolator male, supply of male and female 245 kv and 145 kv isolator, male arm suitable for 245 kv cgl (pipel type) make isolators its male contact arm shall be fabricated with all. flat. the male jaw and out going terminal rod flexible connection shall be made of copper. the male contact shall have steel spring between jaw fingures, copper parts shall be silver plated and shall be assembled. its contact base to be forced on insultor shall have hole as per modified drawing/sample., female arm suitable for 245 kv cgl (pipe type) make isolators its male contact arm shall be fabricated with all. flat. the male jaw and out going terminal rod flexible connection shall be made of copper. the female contact shall have steel spring between jaw fingures, copper parts shall be silver plated and shall be assembled. its contact base to be forced on insultor shall have hole as per modified drawing/sample., supply of female contact made of copper suitable for rama make 145 kv isolator as per sample., supply of male contact made of copper suitable for rama make 145 kv isolator as per sample., supply of female contact made of copper suitable for g nandi make 145 kv isolator as per sample., supply of male contact made of copper suitable for g nandi make 145 kv isolator as per sample., supply of female contact made of copper suitable for smc make 145 kv isolator as per sample., supply of male contact made of copper suitable for smc make 145 kv isolator as per sample.
Agency / Dept :
uttar pradesh power corporation limited UPPCL
Due Date :
Oct 12, 2026
Tender Value :
4.93L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Fabricated Steel Arm. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Fabricated Steel Arm sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Fabricated Steel Arm Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Fabricated Steel Arm, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Fabricated Steel Arm Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Fabricated Steel Arm Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Fabricated Steel Arm.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Fabricated Steel Arm depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Fabricated Steel Arm Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Fabricated Steel Arm bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Fabricated Steel Arm. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Fabricated Steel Arm, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Fabricated Steel Arm, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Fabricated Steel Arm?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Fabricated Steel Arm tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Fabricated Steel Arm?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Fabricated Steel Arm, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Fabricated Steel Arm is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All