sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

23Latest Extruded bar Tenders List

Latest Extruded bar Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Extruded bar tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Extruded bar tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Extruded bar Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Extruded bar tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Extruded bar Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Extruded bar Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Extruded bar Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Extruded bar tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Extruded bar Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Extruded bar sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Extruded bar tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Extruded bar tenders.

Is EMD mandatory for all Extruded bar tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Extruded bar work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Extruded bar tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Extruded bar Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17003273
Location : thiruvananthapuram , kerala
NEW TENDER
tender for manufacture and supply of aa2014-t6511 extruded rods/bars
Agency / Dept :
new space india limited
Due Date :
Sep 10, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16988528
Location : coimbatore , tamil nadu
Source : GEM Tenders
NEW TENDER
corrigendum tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
49.71L
View Documents
T18 Ref No : 16857791
Location : medak , telangana
Source : GEM Tenders
LIVE TENDER
tender for al alloy extruded bar gr: 24345w, is: 733-75/d16t gost 21488-97/gr. 2024 t4, en573-3, 755-1, -2, -3 / dia , al alloy extruded bar gr: 24345w, is: 733-83/d16t gost 21488-97/gr. 2024 t4, en573-3, 755-1, 2, 3 / dia 70m , al alloy extruded bar dia 110mm gr: 24345w, is: 733-75/d16t gost 21488-97/ gr. 2024 t4, en573-3, 755-1, - , al alloy extruded bar dia 140mm gr: 24345w, is: 733-75/d16t gost 21488-97/gr. 2024 t4, en573-3, 755-1, - 2 , al alloy extruded bar dia 185mm gr: 24345w, is: 733-75/d16t gost 21488-97/ gr. 2024 t4, en573-3, 755-1, -
Agency / Dept :
bharat dynamics limited BDL
Due Date :
Sep 09, 2026 (9 days left)
Tender Value :
9.89Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16808706
Location : kupwara , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for aggregate - quarry stone for random rubble masonry of grading between 150mm to 250mm and stone may be of any shape but shall be not less than 15 cm in any direction as per tech spec , quick setting compound conforming to is 9103 of 1999 as per tech spec , stone aggregate to be crushed rock or gravel 20mm graded as per tech spec , stone aggregate to be crushed rock or gravel 40mm graded as per tech spec , stone aggregate to be crushed rock or gravel 63mm graded as per tech spec , natural sand conforming to is 383 of 2016 as per tech spec att , ilcb of size 225x112x100mm thick with grade of cement concrete of m50 as per tech spec , precast concrete u drain with size 500mmx300mmx450mm wall thickness 60mm as per tech spec , rcc hume pipe single collar np-03 class as per tech spec , load beafring concrete pcc solid blocks of size 400mmx200mmx200mm as per tech spec , mild steel tmt bars 16 mm dia conforming to relevant is as per tech spec , mild steel tmt bars 10 mm dia conforming to relevant is as per tech spec , mild steel tmt bars 12 mm dia conforming to relevant is as per tech spec , ms binding wire annealed not less than 0.9mm dia confirming to relevant is , nails 3 inch as per tech spec , wooden planks 2nd class hard wood 20mm thick 300mm widde 1800mm long as per tech spec , supply of 500 gsm min non woven needle punched virgin polypropylene geotextile filter as per tech spec , collapsible galvanised double twisted hexagonal shaped steel, mechanically selvedged gabion basket as per tech spec , brick trowel conforming to is 6013 of 2023 as per tech spec , drop-forged high-grade carbon steel brick hammer as per tech spec , light weight extruded aluminum alloy straight edge as per tech spec , plaster trowel confirming to is 6013 of 2023 as per tech spec , 16-inch or 400mm diameter mortar pan or tasla as per tech spec , high-tenacity nylon monofilament line 1.2 mm to 1.5mm diameter as per tech spec , cast iron plumb bobs as per tech spec , heavy-duty metal hand rammers for earth compaction as per tech spec , heavy-duty pickaxes or kudali 14 cp with chisel and point ends as per tech spec att , shovel square nose 14 gauge tata high carbon steel, product code svl 022 as per tech spec , single-piece hot-forged carbon steel powrah as per tech spec , non-slip, heavy-duty industrial rubber gloves as per tech spec , aluminium spirit levels 12-inch 300 mm as per tech spec , transparent, flexible pvc water leveling tubes in 50-meter as per tech spec , non-metallic fiberglass measuring tape 15 mtr as per tech spec , heavy duty crow bar, 5 feet 1500 mm length as per tech spec , electric chop saw machine blade of 14 inch dia as per tech spec , electric hand grinder cutting wheel of dia 4 inch as per tech spec , iron cutting machine blade , hack saw blade, aggregate, quarry stone for random rubble masonry of grading between 150mm to 250mm and stone may be of any shape but shall be not less than 15 cm in any direction as per tech spec, quick setting compound conforming to is 9103 of 1999 as per tech spec, stone aggregate to be crushed rock or gravel 20mm graded as per tech spec, stone aggregate to be crushed rock or gravel 40mm graded as per tech spec, stone aggregate to be crushed rock or gravel 63mm graded as per tech spec, natural sand conforming to is 383 of 2016 as per tech spec att, ilcb of size 225x112x100mm thick with grade of cement concrete of m50 as per tech spec, precast concrete u drain with size 500mmx300mmx450mm wall thickness 60mm as per tech spec, rcc hume pipe single collar np-03 class as per tech spec, load beafring concrete pcc solid blocks of size 400mmx200mmx200mm as per tech spec, mild steel tmt bars 16 mm dia conforming to relevant is as per tech spec, mild steel tmt bars 10 mm dia conforming to relevant is as per tech spec, mild steel tmt bars 12 mm dia conforming to relevant is as per tech spec, ms binding wire annealed not less than 0.9mm dia confirming to relevant is, nails 3 inch as per tech spec, wooden planks 2nd class hard wood 20mm thick 300mm widde 1800mm long as per tech spec, supply of 500 gsm min non woven needle punched virgin polypropylene geotextile filter as per tech spec, collapsible galvanised double twisted hexagonal shaped steel, mechanically selvedged gabion basket as per tech spec, brick trowel conforming to is 6013 of 2023 as per tech spec, drop-forged high-grade carbon steel brick hammer as per tech spec, light weight extruded aluminum alloy straight edge as per tech spec, plaster trowel confirming to is 6013 of 2023 as per tech spec, 16-inch or 400mm diameter mortar pan or tasla as per tech spec, high-tenacity nylon monofilament line 1.2 mm to 1.5mm diameter as per tech spec, cast iron plumb bobs as per tech spec, heavy-duty metal hand rammers for earth compaction as per tech spec, heavy-duty pickaxes or kudali 14 cp with chisel and point ends as per tech spec att, shovel square nose 14 gauge tata high carbon steel, product code svl 022 as per tech spec, single-piece hot-forged carbon steel powrah as per tech spec, non-slip, heavy-duty industrial rubber gloves as per tech spec, aluminium spirit levels 12-inch 300 mm as per tech spec, transparent, flexible pvc water leveling tubes in 50-meter as per tech spec, non-metallic fiberglass measuring tape 15 mtr as per tech spec, heavy duty crow bar, 5 feet 1500 mm length as per tech spec, electric chop saw machine blade of 14 inch dia as per tech spec, electric hand grinder cutting wheel of dia 4 inch as per tech spec, iron cutting machine blade, hack saw blade
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
91.57L
View Documents
T18 Ref No : 16874951
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for taking down existing point wiring , one light point controlled by one switch , one wall fan exhaust fan ceiling fan , one 3 pin socket outlet point , one 3 pin socket outlet point 5 amps , one 3 pin socket outlet point 15 amps on independent , taking down existing tube light bulb , supply and fixing for energy saving environmental , supply and fixing led light fitting mirror type , supply and fixing led luminaire 600 mm , material and labour lamp holder pvc p , supply and fixing modular switch , supply and fixing modular switch 1 way , supply and fixing modular socket 6a , supply and fixing modular socket , supply and fixing modular fan , supply and fixing modular white cover plate with , supply and fixing modular white cover plate , supply and fixing modular white cover , supply and fixing modular , material and labour ceiling rose 3 phase pvc , material and labour boxes junctions plastic , material and labour for sub main , material and labour for sub main wiring with two single , supply and fixing sheet metal enclosures , material and labour for shifting of split type ac , taking down existing exhaust fan , taking down existing dbs box mccb , supply and fixing mcb double door , supply and fixing sheet metal encloser , sp 6 to 32 amp , spn 40 to 63 amp , supply laying commissioning ug cable xlpe , excavation in trenches not exceeding , returning filling in including spreading levelling , removing excavated material not exceeding , material and labour for sand cushioning , material and labour for unreinforced precast, renovation and alteration of internal wiring with all fitting in gym pcda, taking down existing point wiring of light point exhaust fan ceiling fan switch socket any size with due care and refixing cleaning painting if required including connecting item all complete as specified and directed, one light point controlled by one switch., one wall fan exhaust fan ceiling fan point controlled by one switch., one 3 pin socket outlet point 5 amps on independent with cables 1.5 sqmm size ., one 3 pin socket outlet point 5 amps on the same board with other switches., one 3 pin socket outlet point 15 amps on independent with cables 4 sqmm size ., taking down existing tube light bulb with due care and refixing cleaning painting if required including connecting item all complete as specified and directed by eng in charge., supply and fixing for energy saving environmental friendly led tubelight fittings 20 watts 1200 mm aluminium body long life impact proof surface wall mounting ip 20 95 luminaries per watt extruded aluminium housing with frosted pmpa diffuser high brightness leds complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size with ceiling rose complete all as specified and directed., supply and fixing led light fitting mirror type with high out put diffuser 2 feet 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete, supply and fixing led luminaire 600 mm x 600 mm 35 by 36 watt 220 v ac recessed type with high efficiency pmma diffuser soft glare free light complete with driver holders and led lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete., material and labour lamp holder pvc polycarbonate type with back plate suitable for batten fittings, supply and fixing modular switch 1 way 6a 1 module, supply and fixing modular switch 1 way 16a 1 module, supply and fixing modular socket 6a 2 by 3 pin combined 2 module independent socket specified and directed by eng in charge., supply and fixing modular socket 6a by 16a 2 by 3 pin combined 2 module, supply and fixing modular fan regulator fan step regulator 120w 2module, supply and fixing modular white cover plate with frame white cover plate with frame 3 module, supply and fixing modular white cover plate with frame white cover plate with frame 6 module, supply and fixing modular white cover plate with frame white cover plate with frame 8 module, supply and fixing modular white cover plate with frame white cover plate with frame 12 module, material and labour ceiling rose 3 phase pvc polycarbonate isolated body, material and labour boxes junctions plastic round four terminals, material and labour for sub main wiring with two single core frls pvc insulated stranded unsheathed cable copper conductor with size 10 sqmm and drawing through and including non metallic pvc conduit concealed in wall including earth continuity conductor of size 10 sqmm pvc insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed pvc conduit including connecting to main board complete all as specified and directed by engineer in charge., material and labour for sub main wiring with two single core frls pvc insulated stranded unsheathed cable copper conductor with size 06 sqmm and drawing through and including non metallic pvc conduit concealed in wall including earth continuity conductor of size 06 sqmm pvc insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed pvc conduit including connecting to main board complete all as specified and directed by engineer in charge., supply and fixing sheet metal enclosures with socket plug top and 20 amp mcb 240 volts double pole and neutral enclosures with two pin and earth plug and socket complete double door type complete all as specified and directed by engineer in charge., material and labour for shifting of split type ac window type ac capacity upto 2 ton from old position and refixing to new position including drilling cutting chasing and making good on existing surface of pcc concreting white cement plastering and all necessary items including transporting of acs from one location to other location in pcda (nc) jammu and handing over the machine equipment in serviceable condition to the user including fixing to new location and supply and fixing drain pipe where not present all as specified and directed by engineer in charge., taking down existing exhaust fan ceiling fan any size with due care and refixing with new lock bolt where required and new fan rod upto 03 ft so that fan mob can hang beyond false ceiling after servicing and cleaning painting if required including connecting electrically using pvc insulated overall sheathed flexible copper conductor cable 0.75 mm all as required and directed., taking down existing dbs box mccb mcb tpn spn sp any size with due care and refixing cleaning painting if required including connecting item all complete as specified and directed by eng in charge., supply and fixing mcb double door distribution board single pole and neutral 240 volt 12 way with 200 amps bus bar complete all as specified and directed., supply and fixing sheet metal encloser distribution board vtpn double door 415 volt 8 way with main incomming mccb and outgoing mcb dbs box all complete as specified and directed by eng in charge., sp 6 to 32 amp, spn 40 to 63 amp, supply laying commissioning ug cable xlpe insulated screened pvc bedded galvanized steel strip or wire armoured electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core cable complete all as specified and directed by engr in charge., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of lt ug cables complete all as specified and directed by eng in charge., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in hard dense soil complete all as specified and directed by eng in charge., removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by eng in charge., material and labour for sand cushioning below and around cable in trenches with rever sand all as specified ., material and labour for unreinforced precast concrete cable cover class lv type 1 flat of size 250 x 150 x 40 mm for cable protection complete all as specified and as directed by eic
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16742570
Location : kupwara , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for tech spec att , rectangular hollow section confirming to is 4923 2017 reaffirmed 2023 as per tech spec att , rectangular hollow section rhs confirming to is 4923 2017 reaffirmed 2023 as per tech spec att , ms angle conforming to is 808 2021 and is 2062 2011 reaffirmed 2021 as per tech spec att , steel roofing trough of size srt size 1630x613x180mm conforming to is 5986 2021 as per tech spec att , steel roofing trough of size 2000 x 613 x 180mm as per tech spec att , steel roofing trough of size 2438 x 613 x 180mm confroming of is 5986 2011 as per tech spec att , silicone gel sealant neutral cure conforming to is 11433 part 1 1985 reaffirmed 2020 as per tech spec att , hdpe sand bags as per tech spec att , pbs roll self finished tar felt hessian base grade-1 conforming to relevant is 1322 1993 reaffirmed 2022 as per tech spec att , hdpe sheet conforming to is 10889 2004 reaffirmed 2016 as per tech spec att , prefabricated steel loop hole conforming to is 1038 1983 reaffirmed 2022 of size 600mm x450mm as per tech spec att , prefabricated steel door conforming to is 1038 1983 reaffirmed 2022 of size 900mm x1800mm as per tech spec att , pre fab welded door lintel made out of 02 nos ismc 200 x 75mm weight 22.30 kgs per rm conforming to is 808 2021 as per tech spec att , pre-fab welded window loop hole lintel made out of 02 nos ismc 200 x 75mm weight 22.30 kgs perrm conforming to is 808 2021 as per tech spec att , synthetic enamel paint olive green conforming to is 2932 part 1 2013 reaffirmed 2018 as per tech spec att , red oxide primer conforming to is 2074 2023 as per tech spec att , polyurethane thinner conforming to is 14314 1995 reaffirmed 2017 as per tech spec att , oil bound distemper confirming to is 428 2000 reaffimed 2018 as per tech spec att , dry distemper confirming to is 427 2013 as per tech spec att , painting brush 4 inch as per tech spec att , self drilling tapping hexagonal head screw sdts with hexagonal head hex head conforming to is 5957 2003 and iso 1478 1999 as per tech spec att , deck sheet of size 3000x975x1.50mm as per tech spec att , ms rack of size 1.22m x 0.61m x 1.65m as per tech spec att , soak pit cover made of 1mm thick ms sheet confirming to is 1079 2017 of size 1.460m x 1.460m as per tech spec , cement base paint conforming to is 5410 2013 reaffirmed 2018 as per tech spec att , jelly filled lightening conductor as per is spec , fire exstinguisher 2 kgs capacity abc-map-90 as per tech spec , bricktrowel conforming to is 6013 2023 of size 305 mm as per tech spec att , drop forged high grade carbon steel brick hammer conforming to is 841 1983 reaffirmed 2021 as per tech spec att , lightweight extruded aluminum alloy straight edge generally conforming to is 2220 1990 reaffirmed 2020 as per tech spec att , plaster trowel confirming to is 6013 2023 as per tech spec att , 400mm diameter mortar pan tasla conforming to is 1079 2017 reaffirmed 2022 as per tech spec att , high tenacity nylon mono filament line 1.2 mm to 1.5mm diameter as per tech spec att , cast iron plumb bobs confiming to is 210 2009 reaffirmed 2020 as per tech spec att , heavy duty metal hand rammers conforming to is 4183 1967 reaffirmed 2001 as per tech spec att , heavy-duty pickaxes kudali 14 cp with chisel and point ends conforming to is 273 1990 reaffirmed 2019 as per tech spec att , shovel square confirming to is 274 part i and ii 1981 reaffirmed 2003 as per tech spec att , single piece hot forged carbon steel powrah conforming to is 1759, srt and ismb, quick setting compound rapidite confirming to is 9103 1999 reaffirmed 2004 as per tech spec att, manufacturing sand confirming to is 383 1970 as per tech spec attached, aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded confirming to is 383 1970 as per tech spec att, aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded confirming to is 383 1970 as per tech spec att, aggregate 63mm stone aggregate to be crushed rock or gravel 63mm graded confirming to is 383 1970 as per tech spec att, common burnt clay building bricks sub class b of size 230x115x75mm conforming to is 1077 2025 as per tech spec att, load bearing concrete pcc soild blocks conforming to is 2185 part 1 2005 reaffirmed 2020 of size 400mm x 200 mm x 200 mm as per spec att, hydrophobic poreblocking ingredients conforming to is 8043 1991 reaffirmed 2014 as per tech spec att, integral water proofing compound conforming to is 2645 2003 reaffirmed 2022 as per tech spec att, mild steel tmt bars 12 mm dia conforming to is 1786 2008 reaffirmed 2018 as per tech spec att, mild steel tmt bars 8 mm dia conforming to relevant is 1786 2008 reaffirmed 2018 as per tech spec att, ms binding wire conforming to relevant is 1786 2008 reaffirmed 2018 as per tech spec att, wooden planks 2nd class hard wood 20mm thick 300mm wide 1800 mm long as per tech spec att, ismb size 150 x 75mm weight 15.00 kgs per rm conforming to is 808 2021 and is 2062 2011 reaffirmed 2021 as per tech spec att, 5mm thick ms plate of size 250x75 conforming to is 2062 2011 reaffirmed 2021 as per tech spec att, 4 nos x 16mm dia 100mm long foundation bolt confirming to is 5624 2021 as per tech spec att, ppgi sheets 3270 x 1000 x 0.60mm thick ppgi sheet og color conforming to is 277 2018 reaffirmed 2022 as per tech spec att, rectangular hollow section confirming to is 4923 2017 reaffirmed 2023 as per tech spec att, rectangular hollow section rhs confirming to is 4923 2017 reaffirmed 2023 as per tech spec att, ms angle conforming to is 808 2021 and is 2062 2011 reaffirmed 2021 as per tech spec att, steel roofing trough of size srt size 1630x613x180mm conforming to is 5986 2021 as per tech spec att, steel roofing trough of size 2000 x 613 x 180mm as per tech spec att, steel roofing trough of size 2438 x 613 x 180mm confroming of is 5986 2011 as per tech spec att, silicone gel sealant neutral cure conforming to is 11433 part 1 1985 reaffirmed 2020 as per tech spec att, hdpe sand bags as per tech spec att, pbs roll self finished tar felt hessian base grade-1 conforming to relevant is 13221993 reaffirmed 2022 as per tech spec att, hdpe sheet conforming to is 10889 2004 reaffirmed 2016 as per tech spec att, prefabricated steel loop hole conforming to is 1038 1983 reaffirmed 2022 of size 600mm x450mm as per tech spec att, prefabricated steel door conforming to is 1038 1983 reaffirmed 2022 of size 900mm x1800mm as per tech spec att, pre fab welded door lintel made out of 02 nos ismc 200 x 75mm weight 22.30 kgs per rm conforming to is 808 2021 as per tech spec att, pre-fab welded window loop hole lintel made out of 02 nos ismc 200 x 75mm weight 22.30 kgs per rm conforming to is 808 2021 as per tech spec att, synthetic enamel paint olive green og conforming to is 2932 part 1 2013 reaffirmed 2018 as per tech spec att, red oxide primer conforming to is 2074 2023 as per tech spec att, polyurethane thinner conforming to is 14314 1995 reaffirmed 2017 as per tech spec att, oil bound distemper confirming to is 428 2000 reaffimed 2018 as per tech spec att, dry distemper confirming to is 427 2013 as per tech spec att, painting brush 4 inch as per tech spec att, self drilling tapping hexagonal head screw sdts with hexagonal head hex head conforming to is 5957 2003 and iso 1478 1999 as per tech spec att, deck sheet of size 3000x975x1.50mm as per tech spec att, ms rack of size 1.22m x 0.61m x 1.65m as per tech spec att, soak pit cover made of 1mm thick ms sheet confirming to is 1079 2017 of size 1.460m x 1.460m as per tech spec, cement base paint conforming to is 5410 2013 reaffirmed 2018 as per tech spec att, jelly filled lightening conductor as per is spec, fire exstinguisher 2 kgs capacity abc-map-90 as per tech spec, bricktrowel conforming to is 6013 2023 of size 305 mm as per tech spec att, drop forged high grade carbon steel brick hammer conforming to is 841 1983 reaffirmed 2021 as per tech spec att, lightweight extruded aluminum alloy straight edge generally conforming to is 2220 1990 reaffirmed 2020 as per tech spec att, plaster trowel confirming to is 6013 2023 as per tech spec att, 400mm diameter mortar pan tasla conforming to is 1079 2017 reaffirmed 2022 as per tech spec att, high tenacity nylon mono filament line 1.2 mm to 1.5mm diameter as per tech spec att, cast iron plumb bobs confiming to is 210 2009 reaffirmed 2020 as per tech spec att, heavy duty metal hand rammers conforming to is 4183 1967 reaffirmed 2001 as per tech spec att, heavy-duty pickaxes kudali 14 cp with chisel and point ends conforming to is 273 1990 reaffirmed 2019 as per tech spec att, shovel square confirming to is 274 part i and ii 1981 reaffirmed 2003 as per tech spec att, single piece hot forged carbon steel powrah conforming to is 1759 1986 reaffirmed 2019 as per tech spec att, high quality heavy duty flat painting brush conforming to is 384 2002 reaffirmed 2018 as per tech spec att, non-slip heavy duty industrial rubber gloves conforming to is 6994 part 6 2021 as per tech spec att, aluminium spirit levels 12 inch conforming to is 5706 1993 reaffirmed 2022 as per tech spec att, transparent flexible pvc water leveling tubes in 50 meter as per tech spec att, heavy duty combination cutting pliers conforming to is 3650 1981 reaffirmed 2022as per tech spec att, non metallic fiberglass measuring tape 15 m conforming to is 1269 part 1 1997 reaffirmed 2024 as per tech spec att, heavy duty crow bar 5 feet length conforming to is 704 1984 reaffirmed year 2021 as per tech spec att, trolley mounted earth auger featuring a fuel efficient 4 stroke diesel engine as per tech spec att
Agency / Dept :
indian army
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
1.41Cr
View Documents
T18 Ref No : 15939276
Location : thiruvananthapuram , kerala
corrigendum tender for manufacture and supply of aa2014 t6511 extruded rods / bars
Agency / Dept :
new space india limited
Due Date :
Jun 30, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15729152
Location : thiruvananthapuram , kerala
tender for manufacture and supply of aa2014 t6511 extruded rods / bars
Agency / Dept :
new space india limited
Due Date :
Jun 23, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16336228
Location : thiruvananthapuram , kerala
tender for manufacture and supply of aa2014 t6511 extruded rods / bars
Agency / Dept :
new space india limited
Due Date :
Aug 05, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Extruded Bar. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Extruded Bar sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Extruded Bar Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Extruded Bar, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Extruded Bar Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Extruded Bar Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Extruded Bar.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Extruded Bar depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Extruded Bar Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Extruded Bar bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Extruded Bar. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Extruded Bar, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Extruded Bar, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Extruded Bar?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Extruded Bar tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Extruded Bar?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Extruded Bar, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Extruded Bar is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All