sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

9Latest Earth fault protection system Tenders List

Latest Earth fault protection system Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Earth fault protection system tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Earth fault protection system tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Earth fault protection system Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Earth fault protection system tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Earth fault protection system Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Earth fault protection system Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Earth fault protection system Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Earth fault protection system tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Earth fault protection system Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Earth fault protection system sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Earth fault protection system tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Earth fault protection system tenders.

Is EMD mandatory for all Earth fault protection system tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Earth fault protection system work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Earth fault protection system tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Earth fault protection system Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16692442
Location : new delhi , delhi
corrigendum tender for nit no.08 /ee(enm)m-8/2026-27 item 09, provisioning and installation of earthing and earth leakage fault protection system of various secondary bps in sector-7 and 8 of ac-13 rohini.
Agency / Dept :
delhi jal board DJB
Due Date :
Aug 14, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16576376
Location : new delhi , delhi
tender for nit no.08 /ee(enm)m-8/2026-27 item 09, provisioning and installation of earthing and earth leakage fault protection system of various secondary bps in sector-7 and 8 of ac-13 rohini.
Agency / Dept :
delhi jal board DJB
Due Date :
Aug 12, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16692438
Location : new delhi , delhi
tender for nit no.09 /ee(enm)m-8/2026-27 item 13, provisioning and installation of earthing and earth leakage fault protection system of various secondary bps in sector 7 and 8 of ac-13 rohini
Agency / Dept :
delhi jal board DJB
Due Date :
Aug 18, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16692341
Location : new delhi , delhi
tender for nit no.09 /ee(enm)m-8/2026-27 item 29, provisioning and installation of earthing and earth leakage fault protection system at various bps sites under ac-12.
Agency / Dept :
delhi jal board DJB
Due Date :
Aug 18, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15690066
Location : nizamabad , telangana
Source : GEM Tenders
corrigendum tender for 3p instantaneous oc relay jrc 043 , 1p instantaneous earth fault relay jrc 012 , undervoltage relay jrv 022 , master trip relay jrv 181 , 2p idmt over current relay jrc 052 , 3p differential relay jrd 013 , under over voltage relay jrv 202 , over voltage relay jrv 212 , dc earth fault relay jrc 082 , 2p idmt over current relay jrc 064, static relays used for lt system and dcdb system protection as per powergrid specifications, 3p instantaneous oc relay-jrc 043, 1p instantaneous earth fault relay-jrc 012, undervoltage relay-jrv 022, master trip relay- jrv 181, 2p idmt over current relay-jrc 052, 3p differential relay- jrd 013, under/over voltage relay jrv 202, over voltage relay jrv 212, dc earth fault relay jrc 082, 2p idmt over current relay-jrc 064
Agency / Dept :
power grid corporation of india limited POWERGRID
Due Date :
Jun 12, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15843088
Location : andal , west bengal
Source : GEM Tenders
tender for ammeter selector switch , voltmeter selector switch , copper connection r phase , copper connection y phase , copper connection b phase , shunt trip coil assy 110v dc , master trip relay , power pack unit 110v dc , epoxy resin cast pt , epoxy resin cast ct , motor protection relay, procurement of ece make items on pac basis, ammeter selector switch, voltmeter selector switch, copper connection (r phase), copper connection (y phase), copper connection (b phase), shunt trip coil assy 110v dc, master trip relay, power pack unit 110v dc, epoxy resin cast potential transformer 3.3kv/110v,3 phase comp with ht fuse, epoxy resin cast current transformer double core double ratio 15va cl.1,5p-10,ratio 200/100/5/5a, epoxy resin cast current transformer double core double ratio 15va cl.1,5p-10,ratio 100/50/5/5a, compact fully programmable numerical motor protection relay micom having short circuit earth fault over current single phasing thermal overload unbalance and stalling protection all in one with fault recording system and led display aux volt 24-230v ac/dc
Agency / Dept :
eastern coalfields limited ECL
Due Date :
Jan 25, 2025
Tender Value :
4.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16022012
Location : lucknow , uttar pradesh
Source : GEM Tenders
corrigendum tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , internal hydrant valve , external yard hydrant valve , butterfly valve , sfc of butterfly valve , orifice plate , pitc non return valve , stainless steel y strainer , pitc of stainless steel y strainer , hose pipe , first aid hose reel , short branch pipe , fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , control valve , hose cabinet , cutting holes , supply of cable , laying of cable , end termination , fire cable , cable tray , earthing , gi strip , gi strip , earth wire , gi pipe, pitc of fire fighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point.the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to is 12469 2019 suitable for automatic operation and nsisting of following,complete in all respects, as required.diesel driven pump. b horizontal type, multistage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.e suitable cement concrete foundation duly plastered and with anti vibration pads.note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank.2280 lpm at 70 m head, jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump.b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads.note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following,complete in all respects, as required terrace pump b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is-12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head, control panels fabrication supplying installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca , apartmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurization pump and diesel pump set complete as per cpwd specification and atc attached for main fire pump , jockey pump, diesel pump with system controller as per as per atc attached, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories.providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class -ii of is 3589 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange and landing valve of external and internal e pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc conforming to is 636 type a as required. gun metal., supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required.a 20 mm nominal internal dia. water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.gun metal., supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required.4 way 150 mm dia m.s. pipe., providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia., supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750 mm 600 mm 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15cm and 15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Jul 14, 2026
Tender Value :
59.95L
View Documents
T18 Ref No : 16517818
Location : imphal , manipur
Source : GEM Tenders
corrigendum tender for refer soq, sh-i, item no. 1a - supply of bi-directional elevated high intensity led runway edge light fixture. a. clear and yellow , refer soq, sh-i, item no. 1- supply of bi- directional elevated high intensity led runway edge light fixure. b. clear and clear , refer soq, sh-i, item no. 2. supply of unidirectional elevated high intensity led cat 1 approach light fitting. , refer soq, sh-i, item no. 3. supply of unidirectional elevated high intensity led simple approach light fitting , refer soq, sh-i, item no. 4a. supply of high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100w. a.clear and yellow , refer soq, sh-i, item no. 4b. supply of high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100w. b. clear and clear , refer soq, sh-i, item no. 5a. supply of following rating 5000v, 50hz series isolating transformers. a. 45 watt, 6.6a by 6.6a , refer soq, sh-i, item no. 5b. supply of following rating 5000v, 50 hz series isolating transformers. b. 100 watt, 6.6a by 6.6a , refer soq, sh-i, item no. 6a. supply of indoor type air cooled constant current regulator. a. 7.5kw , refer soq, sh-i, item no. 6b. supply of indoor type air cooled constant current regulator. b. 2.5 kw , refer soq, sh-i, item no. 7a. supply of following 5kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable. a. 6 sq.mm , refer soq, sh-i, item no. 7b. supply of following 5 kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable. b. 2c x 6 sq.mm , refer soq, sh-i, item no. 8a. supply of following sizes 5 kv grade dry type plug and receptacle. a. 6 sq.mm , refer soq, sh-i, item no. 9a. supply of high-density polyethylene hdpe pipe with pressure rating pn6 grade pe 63. a. 40mm dia , refer soq, sh-ii, item no. 1. itc of ccr including interconnection of existing power cable and control cable within 50m lead , refer soq, sh-ii, item no. 2a. itc of fitting type on the existing transformer housing boxes. a. hirl elevated type , refer soq, sh-ii, item no. 2b. itc of fitting type on the existing transformer housing boxes. b. sapl , refer soq, sh-ii, item no. 2c. itc of fitting type on the existing transformer housing boxes. c. threshold , refer soq, sh-ii, item no. 2d. itc of fitting type on the existing transformer housing boxes. d. end light , refer soq, sh-ii, item no. 2e. itc of fitting type on the existing transformer housing boxes. e. inset , refer soq, sh-ii, item no. 3. itc of airfield lighting cable. , refer soq, sh-ii, item no. 4a. making field connections by crimping 6 by 16 sq.mm plug and receptable with the exisitng 16 by 6 sq.mm single core pvc insulated copper conductor cable. a. 6 sq.mm , refer soq, sh-ii, item no. 5. laying of one no. pvc insulated and sheathed cu condutor afl cable of 5kv grade , refer soq, sh-ii, item no. 6. laying, jointing and coomissioning of 40 mm dia hdpe pipe. , refer soq, sh-ii, item no. 7. dismantling of existing elevated type, hirl, sapl, inset fittings along with the base plate including transportation to aai store. , refer soq, sh-ii, item no. 8. dismantling of existing elevated type, cat-i, along with the base plate, disconnection of bi-pin lead, etc. including transportation to aai store., supply installation testing and commissioning of led rwy elevated edgelight and cat i and sapl and inset fitting and iso transformer and ccr, sh-i item no. 1a. supply of bi-directional elevated high intensity led runway edge light fixture with refocused led module or led modules up to 45 w suitable for series circuit 2.8a to 6.6 a current. colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with clear glass at each side to cover the led module for main beam. each light fitting should have breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring & plain washers and other accessories etc. and should meet latest icao or faa compliance requirement. a. clear and yellow, sh-i, item no. 1b. supply of bi-directional elevated high intensity led runway edge light fixture with refocused led module or led modules up to 45 w suitable for series circuit 2.8a to 6.6 a current. colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with clear glass at each side to cover the led module for main beam. each light fitting should have breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring & plain washers and other accessories etc. and should meet latest icao or faa compliance requirement. b. clear and clear, sh-i, item no. 2. supply of unidirectional elevated high intensity led cat 1 approach light fitting with pre-focused led module or led modules up to 45w suitable for series circuit 2.8a to 6.6 a current. colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with front glass before the led module for main beam. the light fitting should have provision for vertical beam adjustment from 0 deg. to 25 deg. with measuring scale and horizontal beam adjustment at each side from 0 deg. to 20 deg. with measuring scale. fixture should be supplied with breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring and plain washers and other accessories etc. fixture should meet latest icao or faa compliance requirement., sh-i, item no. 3. supply of unidirectional elevated high intensity led simple approach light fitting with pre-focused led module or led modules up to 45w suitable for series circuit 2.8a to 6.6a current, colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with front glass before the led module for main beam. the light fitting should have provision for vertical beam adjustment from 0 deg. to 25 deg. with measuring scale and horizontal beam adjustment at each side from 0 deg. to 20 deg. with measuring scale. fixture should be supplied with breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring and plain washers and other accessories etc. fixture should meet latest icao or faa compliance requirement., sh-i, item no. 4a. supply of faa certified or compliant model, inset, bidirectional, suitable for icao cat-i all weather operation, high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100 w with integral driver, fail-open technology and electronics suitable for 2.8 to 6.6 amps current with connected heat resistant accessories, prism assembly, optical assembly, o-ring seal, pressure relief test plug, hardware, lenses cable lead with plug and all standard accessories and ready for site installation on existing cement or asphaltic area and compatible to existing alcms or ilcms conforming to latest icao or car requirement as per technical specifications complete as required. a. clear and yellow, sh-i, item no. 4b. supply of faa certified or compliant model, inset, bidirectional, suitable for icao cat-i all weather operation, high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100 w with integral driver, fail-open technology and electronics suitable for 2.8 to 6.6 amps current with connected heat resistant accessories, prism assembly, optical assembly, o-ring seal, pressure relief test plug, hardware, lenses cable lead with plug and all standard accessories and ready for site installation on existing cement or asphaltic area and compatible to existing alcms or ilcms conforming to latest icao or car requirement as per technical specifications complete as required. b. clear and clear, sh-i, item no. 5a. supply of following rating 5000v, 50 hz series isolating transformers encapsulated in black cross linked polychloroprene compound like tpe or tpr or tpv with primary and secondary connections suitable to be operated confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms. a. 45 watt, 6.6a by 6.6a, sh-i, item no. 5b. supply of following rating 5000v, 50 hz series isolating transformers encapsulated in black cross linked polychloroprene compound like tpe or tpr or tpv with primary and secondary connections suitable to be operated confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms. b. 100 watt, 6.6a by 6.6a, sh-i, item no. 6a. supply of indoor type air cooled constant current regulator ccr of micro processor controlled, thyristor type suitable for operation on single phase 230v by 2-phase 400v ac + pe + or - 10 per cent, 50 hz input ac supply with 5 steps variation of current output i.e. 2.8, 3.4, 4.0, 5.2 and 6.6 amp and able to communicate with pc or plc controlled system with digital output ammeter of 0-10 amps, over current, over voltage, open circuit and earth fault protection and earth leakage meter, two stage earth leakage detector, positive back indication equipments, hours run counter, lcd display complete as required for the following rating and confirm to specifications enclosed and suitable for operation on the existing airfield lighting control and monitoring system alcms with communication, local and remote control and monitoring even and data recording and history keeping etc. complete as required as per technical specifications. a. 7.5 kw, sh-i, item no. 6b. supply of indoor type air cooled constant current regulator ccr of micro processor controlled, thyristor type suitable for operation on single phase 230v by 2-phase 400v ac + pe + or - 10 per cent, 50 hz input ac supply with 5 steps variation of current output i.e. 2.8, 3.4, 4.0, 5.2 and 6.6 amp and able to communicate with pc or plc controlled system with digital output ammeter of 0-10 amps, over current, over voltage, open circuit and earth fault protection and earth leakage meter, two stage earth leakage detector, positive back indication equipments, hours run counter, lcd display complete as required for the following rating and confirm to specifications enclosed and suitable for operation on the existing airfield lighting control and monitoring system alcms with communication, local and remote control and monitoring even and data recording and history keeping etc. complete as required as per technical specifications. b. 2.5 kw, sh-i, item no. 7a. supply of following 5 kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable generally confirming to is 1554 part ii - 1981 with up-to-date amendments as required. a. 6 sq.mm, sh-i, item no. 7b. supply of following 5 kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable generally confirming to is 1554 part ii - 1981 with up-to-date amendments as required. b. 2c x 6 sq.mm, sh-i, item no. 8a. supply of following sizes 5 kv grade dry type plug and receptacle of type i, class b primary connector kit with field attachment and suitable for 5 kv grade single core copper conductor, copper braided, xlpe insulated pe outer sheathed shielded cable, complete as required as per technical specifications. a. 6 sq.mm, sh-i, item no. 9a. supply of high-density polyethylene hdpe pipe with pressure rating pn6 grade pe 63 confirming to is 4984 2016 with latest amendment, complete with all associated accessories like couplers, bends, tee etc. complete as per site requirement as per technical specifications. a. 40 mm dia, sh-ii, item no. 1. installation testing and commissioning of ccr including interconnection of existing power cable and control cable within 50m lead and making foundation, for operating with the existing airfield lighting control and monitoring system alcms complete as required as per technical specifications., sh-ii, item no. 2a. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. a. hirl elevated type, sh-ii, item no. 2b. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. b. sapl, sh-ii, item no. 2c. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. c. threshold, sh-ii, item no. 2d. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. d. end light, sh-ii, item no. 2e. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. e. end light, sh-ii, item no. 3. installation, testing and commissioning of the undermentioned airfield lighting fixtures complete with base plate, transformer, support, interconnection, end termination earthing including ensuring original elevation of the fitting x-y-z of the fitting through checking or of measurement of the level or alignment with dgps and total station etc. as required., sh-ii, item no. 4a. making field connections by crimping 6 by 16 sq.mm plug and receptable with the exisitng 16 by 6 sq.mm single core pvc insulated copper conductor cable including filling the gap with water sealent material, applying pvc insulation tape of bell or permacel etc. complete as required. a. 6 sq.mm, sh-ii, item no. 5. laying of one no. pvc insulated and sheathed cu condutor afl cable of 5kv grade upto cable of size upto 25 sq.mm in existing pipe etc. as reqd., sh-ii, item no. 6. laying, jointing and commissioning of 40 mm dia hdpe pipe pn6 grade pe 63 confirming to is 4984-2016 by trenchless method by carrying out horizontal directional drilling hdd along or across various fexible or rigid pavement like runway or taxiway and service road or drain etc. at various site or location as per the drawing approved by aai including survey, information collection regarding underground utilities, sensing of utilities by sensing equipment, pit making, pilot drilling, pre-reaming, pulling the supplied duct of various size as per the design invert level and providing baricades and necessary warning signal lights, restoration of paved surfaces or utilities etc. as required. 40 mm., sh-ii, item no. 7. dismantling of existing elevated type, hirl, sapl, inset fittings along with the base plate, disconnection of bi-pin lead, etc complete as required including transportation to aai store as required., sh-ii, item no. 8. dismantling of existing elevated type, cat-i, along with the base plate, disconnection of bi-pin lead, etc complete as required including transportation to aai store as required including measurment of the existing level of each fitting with calibrated dgps and total station by a certified survery etc, as required before dismentalling. including transportation to aai store as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 10, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16343707
Location : imphal , manipur
Source : GEM Tenders
tender for refer soq, sh-i, item no. 1a - supply of bi-directional elevated high intensity led runway edge light fixture. a. clear and yellow , refer soq, sh-i, item no. 1- supply of bi- directional elevated high intensity led runway edge light fixure. b. clear and clear , refer soq, sh-i, item no. 2. supply of unidirectional elevated high intensity led cat 1 approach light fitting. , refer soq, sh-i, item no. 3. supply of unidirectional elevated high intensity led simple approach light fitting , refer soq, sh-i, item no. 4a. supply of high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100w. a.clear and yellow , refer soq, sh-i, item no. 4b. supply of high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100w. b. clear and clear , refer soq, sh-i, item no. 5a. supply of following rating 5000v, 50hz series isolating transformers. a. 45 watt, 6.6a by 6.6a , refer soq, sh-i, item no. 5b. supply of following rating 5000v, 50 hz series isolating transformers. b. 100 watt, 6.6a by 6.6a , refer soq, sh-i, item no. 6a. supply of indoor type air cooled constant current regulator. a. 7.5kw , refer soq, sh-i, item no. 6b. supply of indoor type air cooled constant current regulator. b. 2.5 kw , refer soq, sh-i, item no. 7a. supply of following 5kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable. a. 6 sq.mm , refer soq, sh-i, item no. 7b. supply of following 5 kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable. b. 2c x 6 sq.mm , refer soq, sh-i, item no. 8a. supply of following sizes 5 kv grade dry type plug and receptacle. a. 6 sq.mm , refer soq, sh-i, item no. 9a. supply of high-density polyethylene hdpe pipe with pressure rating pn6 grade pe 63. a. 40mm dia , refer soq, sh-ii, item no. 1. itc of ccr including interconnection of existing power cable and control cable within 50m lead , refer soq, sh-ii, item no. 2a. itc of fitting type on the existing transformer housing boxes. a. hirl elevated type , refer soq, sh-ii, item no. 2b. itc of fitting type on the existing transformer housing boxes. b. sapl , refer soq, sh-ii, item no. 2c. itc of fitting type on the existing transformer housing boxes. c. threshold , refer soq, sh-ii, item no. 2d. itc of fitting type on the existing transformer housing boxes. d. end light , refer soq, sh-ii, item no. 2e. itc of fitting type on the existing transformer housing boxes. e. inset , refer soq, sh-ii, item no. 3. itc of airfield lighting cable. , refer soq, sh-ii, item no. 4a. making field connections by crimping 6 by 16 sq.mm plug and receptable with the exisitng 16 by 6 sq.mm single core pvc insulated copper conductor cable. a. 6 sq.mm , refer soq, sh-ii, item no. 5. laying of one no. pvc insulated and sheathed cu condutor afl cable of 5kv grade , refer soq, sh-ii, item no. 6. laying, jointing and coomissioning of 40 mm dia hdpe pipe. , refer soq, sh-ii, item no. 7. dismantling of existing elevated type, hirl, sapl, inset fittings along with the base plate including transportation to aai store. , refer soq, sh-ii, item no. 8. dismantling of existing elevated type, cat-i, along with the base plate, disconnection of bi-pin lead, etc. including transportation to aai store., supply installation testing and commissioning of led rwy elevated edgelight and cat i and sapl and inset fitting and iso transformer and ccr, sh-i item no. 1a. supply of bi-directional elevated high intensity led runway edge light fixture with refocused led module or led modules up to 45 w suitable for series circuit 2.8a to 6.6 a current. colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with clear glass at each side to cover the led module for main beam. each light fitting should have breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring & plain washers and other accessories etc. and should meet latest icao or faa compliance requirement. a. clear and yellow, sh-i, item no. 1b. supply of bi-directional elevated high intensity led runway edge light fixture with refocused led module or led modules up to 45 w suitable for series circuit 2.8a to 6.6 a current. colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with clear glass at each side to cover the led module for main beam. each light fitting should have breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring & plain washers and other accessories etc. and should meet latest icao or faa compliance requirement. b. clear and clear, sh-i, item no. 2. supply of unidirectional elevated high intensity led cat 1 approach light fitting with pre-focused led module or led modules up to 45w suitable for series circuit 2.8a to 6.6 a current. colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with front glass before the led module for main beam. the light fitting should have provision for vertical beam adjustment from 0 deg. to 25 deg. with measuring scale and horizontal beam adjustment at each side from 0 deg. to 20 deg. with measuring scale. fixture should be supplied with breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring and plain washers and other accessories etc. fixture should meet latest icao or faa compliance requirement., sh-i, item no. 3. supply of unidirectional elevated high intensity led simple approach light fitting with pre-focused led module or led modules up to 45w suitable for series circuit 2.8a to 6.6a current, colours should be emitted from the leds. brilliancy shall change on all steps as per current provided by ccr and the intensity ratio on all steps shall be as per faa standard. fitting shall be provided with front glass before the led module for main beam. the light fitting should have provision for vertical beam adjustment from 0 deg. to 25 deg. with measuring scale and horizontal beam adjustment at each side from 0 deg. to 20 deg. with measuring scale. fixture should be supplied with breakable coupling, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. m-10 stainless steel bolts, spring and plain washers and other accessories etc. fixture should meet latest icao or faa compliance requirement., sh-i, item no. 4a. supply of faa certified or compliant model, inset, bidirectional, suitable for icao cat-i all weather operation, high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100 w with integral driver, fail-open technology and electronics suitable for 2.8 to 6.6 amps current with connected heat resistant accessories, prism assembly, optical assembly, o-ring seal, pressure relief test plug, hardware, lenses cable lead with plug and all standard accessories and ready for site installation on existing cement or asphaltic area and compatible to existing alcms or ilcms conforming to latest icao or car requirement as per technical specifications complete as required. a. clear and yellow, sh-i, item no. 4b. supply of faa certified or compliant model, inset, bidirectional, suitable for icao cat-i all weather operation, high intensity runway edge light for icao aviation visual aids requirements complete with led module or led modules up to 100 w with integral driver, fail-open technology and electronics suitable for 2.8 to 6.6 amps current with connected heat resistant accessories, prism assembly, optical assembly, o-ring seal, pressure relief test plug, hardware, lenses cable lead with plug and all standard accessories and ready for site installation on existing cement or asphaltic area and compatible to existing alcms or ilcms conforming to latest icao or car requirement as per technical specifications complete as required. b. clear and clear, sh-i, item no. 5a. supply of following rating 5000v, 50 hz series isolating transformers encapsulated in black cross linked polychloroprene compound like tpe or tpr or tpv with primary and secondary connections suitable to be operated confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms. a. 45 watt, 6.6a by 6.6a, sh-i, item no. 5b. supply of following rating 5000v, 50 hz series isolating transformers encapsulated in black cross linked polychloroprene compound like tpe or tpr or tpv with primary and secondary connections suitable to be operated confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms. b. 100 watt, 6.6a by 6.6a, sh-i, item no. 6a. supply of indoor type air cooled constant current regulator ccr of micro processor controlled, thyristor type suitable for operation on single phase 230v by 2-phase 400v ac + pe + or - 10 per cent, 50 hz input ac supply with 5 steps variation of current output i.e. 2.8, 3.4, 4.0, 5.2 and 6.6 amp and able to communicate with pc or plc controlled system with digital output ammeter of 0-10 amps, over current, over voltage, open circuit and earth fault protection and earth leakage meter, two stage earth leakage detector, positive back indication equipments, hours run counter, lcd display complete as required for the following rating and confirm to specifications enclosed and suitable for operation on the existing airfield lighting control and monitoring system alcms with communication, local and remote control and monitoring even and data recording and history keeping etc. complete as required as per technical specifications. a. 7.5 kw, sh-i, item no. 6b. supply of indoor type air cooled constant current regulator ccr of micro processor controlled, thyristor type suitable for operation on single phase 230v by 2-phase 400v ac + pe + or - 10 per cent, 50 hz input ac supply with 5 steps variation of current output i.e. 2.8, 3.4, 4.0, 5.2 and 6.6 amp and able to communicate with pc or plc controlled system with digital output ammeter of 0-10 amps, over current, over voltage, open circuit and earth fault protection and earth leakage meter, two stage earth leakage detector, positive back indication equipments, hours run counter, lcd display complete as required for the following rating and confirm to specifications enclosed and suitable for operation on the existing airfield lighting control and monitoring system alcms with communication, local and remote control and monitoring even and data recording and history keeping etc. complete as required as per technical specifications. b. 2.5 kw, sh-i, item no. 7a. supply of following 5 kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable generally confirming to is 1554 part ii - 1981 with up-to-date amendments as required. a. 6 sq.mm, sh-i, item no. 7b. supply of following 5 kv grade single core, stranded copper conductor pvc insulated and pvc sheathed underground airfield lighting cable generally confirming to is 1554 part ii - 1981 with up-to-date amendments as required. b. 2c x 6 sq.mm, sh-i, item no. 8a. supply of following sizes 5 kv grade dry type plug and receptacle of type i, class b primary connector kit with field attachment and suitable for 5 kv grade single core copper conductor, copper braided, xlpe insulated pe outer sheathed shielded cable, complete as required as per technical specifications. a. 6 sq.mm, sh-i, item no. 9a. supply of high-density polyethylene hdpe pipe with pressure rating pn6 grade pe 63 confirming to is 4984 2016 with latest amendment, complete with all associated accessories like couplers, bends, tee etc. complete as per site requirement as per technical specifications. a. 40 mm dia, sh-ii, item no. 1. installation testing and commissioning of ccr including interconnection of existing power cable and control cable within 50m lead and making foundation, for operating with the existing airfield lighting control and monitoring system alcms complete as required as per technical specifications., sh-ii, item no. 2a. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. a. hirl elevated type, sh-ii, item no. 2b. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. b. sapl, sh-ii, item no. 2c. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. c. threshold, sh-ii, item no. 2d. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. d. end light, sh-ii, item no. 2e. installation, testing and commissioning of following fitting type on the existing transformer housing boxes including installation of transformer, lens, lamps gasket, nut bolts, lens holding clamp and other accessories including alignment, levelling, isolating transformer, connection, earth connection etc. all complete. e. end light, sh-ii, item no. 3. installation, testing and commissioning of the undermentioned airfield lighting fixtures complete with base plate, transformer, support, interconnection, end termination earthing including ensuring original elevation of the fitting x-y-z of the fitting through checking or of measurement of the level or alignment with dgps and total station etc. as required., sh-ii, item no. 4a. making field connections by crimping 6 by 16 sq.mm plug and receptable with the exisitng 16 by 6 sq.mm single core pvc insulated copper conductor cable including filling the gap with water sealent material, applying pvc insulation tape of bell or permacel etc. complete as required. a. 6 sq.mm, sh-ii, item no. 5. laying of one no. pvc insulated and sheathed cu condutor afl cable of 5kv grade upto cable of size upto 25 sq.mm in existing pipe etc. as reqd., sh-ii, item no. 6. laying, jointing and commissioning of 40 mm dia hdpe pipe pn6 grade pe 63 confirming to is 4984-2016 by trenchless method by carrying out horizontal directional drilling hdd along or across various fexible or rigid pavement like runway or taxiway and service road or drain etc. at various site or location as per the drawing approved by aai including survey, information collection regarding underground utilities, sensing of utilities by sensing equipment, pit making, pilot drilling, pre-reaming, pulling the supplied duct of various size as per the design invert level and providing baricades and necessary warning signal lights, restoration of paved surfaces or utilities etc. as required. 40 mm., sh-ii, item no. 7. dismantling of existing elevated type, hirl, sapl, inset fittings along with the base plate, disconnection of bi-pin lead, etc complete as required including transportation to aai store as required., sh-ii, item no. 8. dismantling of existing elevated type, cat-i, along with the base plate, disconnection of bi-pin lead, etc complete as required including transportation to aai store as required including measurment of the existing level of each fitting with calibrated dgps and total station by a certified survery etc, as required before dismentalling. including transportation to aai store as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 04, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Earth Fault Protection System. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Earth Fault Protection System sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Earth Fault Protection System Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Earth Fault Protection System, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Earth Fault Protection System Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Earth Fault Protection System Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Earth Fault Protection System.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Earth Fault Protection System depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Earth Fault Protection System Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Earth Fault Protection System bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Earth Fault Protection System. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Earth Fault Protection System, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Earth Fault Protection System, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Earth Fault Protection System?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Earth Fault Protection System tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Earth Fault Protection System?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Earth Fault Protection System, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Earth Fault Protection System is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All