sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

9Latest Direct current resistance standard Tenders List

Latest Direct current resistance standard Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Direct current resistance standard tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Direct current resistance standard tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Direct current resistance standard Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Direct current resistance standard tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Direct current resistance standard Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Direct current resistance standard Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Direct current resistance standard Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Direct current resistance standard tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Direct current resistance standard Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Direct current resistance standard sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Direct current resistance standard tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Direct current resistance standard tenders.

Is EMD mandatory for all Direct current resistance standard tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Direct current resistance standard work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Direct current resistance standard tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Direct current resistance standard Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents
T18 Ref No : 15736028
Location : bardhaman , west bengal
Source : GEM Tenders
tender for terrain specific drone simulator training lab digitized lecture stand , ups 10 kva , computer set 12 gen 17 , printer a3 , laptops systems , drone battery charger , raspberry pi kits with sd card , pcb design setup ki cad , radio for simulator , 3d design software , arduino mega esp 32 and jumper wires set , display , goggle for simulator , digital air unit 5km , 3d printer bamboo lab p2s , 3d printer bamboo lab p1s , molicel p42a battery , endurance test machine , rig pid tuning 3 axis , motor thrust checker machine , assy stations , spot welding stn 709a with other access , 3d printer components pla cf tpu petg abs pla lw , 3 axis drone trg rig , trg drone , spare parts in bulk , furnishing fitments and hvacs , fpv drone sim , digital goggle , radio master pocket , prabal 3.0 counter drone jx sys , analog goggles , digital cam 10km, terrain specific drone simulator training lab, all-in-one smart lectern that integrates a pc interactive touchscreen audio system connectivity ports resolution full hd 1920 z 1080 pixels or 4k ultra hd operating system preinstalled windows or linux microphones gooseneck microphones on the stand accompanied by wireless cordless lapel or handheld microphones, high capacity heavy duty power backup system designed switches seamlessly to battery power without interrupting sensitive connected equipment, memory ram ddr4 up to 3200 mhz or ddr5 up to 4800mhz operating system pre installed with windows 11 home or pro wireless wi fi and bluetooth ports, handle documents up to 297mm x 420mm auto duplexing two sided printing robust adf interfaces ethernet lan wi fi direct,and usb 2.0 3.0 os compatibility compatible with windows 11 and macos, 16 gb 512 gb ssd windows 11 home 4 gb graphics nvidia ge force rtx 2050, brand hota model d6 ultra input voltage ac 100 240 v dc 6.5 30 v charge current 0.1 15 a x 2 lihv lipo life lion lixx1 6s niozn nicdnimh 1 16 s lead acid pb1 12s 2 24 v, board computer featuring a 1.4ghz 64 bit quad core processor 1gb lpddr2 ram and built in dual band 2.4ghz 5ghz wi fi along with bluetooth 4.2 it offers a 40 pin gpio header gigabit ethernet via usb 2.0 4 usb 2.0 ports making it suitable for hobbyist projects retro gaming and light computing tasks, ki cad is a open source electronic design automation eda software suite used for creating schematic diagrams and printed circuit board pcb layouts it is cross platform windows linux macos and supports up to 32 copper layers, making it suitable for complex professional electronics design, the radio master pocket is a compact portable 16 channel radio contr oller designed for fpv pilots featuring hall effect gimbals edgetx firmware and a foldable antenna, tinker cad is a browser based 3d designs and circuit simulation tool requiring no specialized hardware it functions on most computers laptops from the last 6 years with webgl support a minimum 864px key limits include a 2000x2000x2000 unit workspace and support for browsers like chrome 50 or safari 10 wide browser viewport, and a mouse or trackpad, micro controller microchip atmega 328p core architecture 8 bit avr risc clock speed 16 mhz via onboard ceramic resonator flash memory 32 kb total 0 point 5 kb utilized by the factory bootloader sram 2 kb for dynamic variable storage eeprom1 kb for non volatile parameter storage and some wires for connection, a 3.5 inch 480x320 pixel tft lcd touchscreen typically using the spi interface is a common and compact display option for the raspberry pi 3 3b it mounts directly onto the gpio pins making it ideal for small portable projects though it may have a lower refresh rate and require specific drivers, with comfortable face sponge and av in function separable design 5 inch screen can be used as small monitor on radio controller or with tripod hd high brightness 5inch lcd specially tuned for fpv racing, o4 video transmission system which can transmit thrilling real time 1080p footage at a smooth 100 fps from up to 6.2 miles away while flying the 12 cmos sensor can record 117 6 wide angle footage at up to 4k60 resolution captured on the modules built in 23gb of memory, 5 inch touchscreen 1080p ai camera and improved 8.5kg extrusion force it supports 300 c nozzle temps 600 mms speed and auto calibration for advanced materials with hardened steel components standard, 256x256x256mm build volume maximum speeds of 500mms all metal hot end advanced sensors for automatic calibration making it ideal for advanced materials like abs asa and petg, 21700 size 4500mah li ion cell for fpv drone, endurance & payload tester rig for military engine propeller validation measures actual thrust produced by motors/propellers, drone testing stand with 360 freedom and telescopic arm we are a leading manufacturer of the tabletop fixed drone testing stand designed to provide a versatile and secure platform for testing drones with complete 360 freedom of movement, this handy tool lets you check out your motor propeller combinations easily at home without needing to installation anything into a model until you ve finalized the setup the stand can handle a wide variety of motors and measure up to 5kg of thrust. high precision linear bearings and thrust sensor give accurate thrust readings down to the gram, soldering iron 60w or higher with adjustable temperature solder wire 60 40 rosin core tin lead is easiest to use flux soldering flux pen or paste hex driver set 1.5mm 2.0mm and 2.5mm metric nut driver 5.5mm and 8mm for prop nuts wire cutters snips small precision wire cutters tweezers fine tip for small wires multimeter for testing for short circuits smoke stopper to prevent burning components on first power up heat gun or lighter for heat shrink tubing thread locker loctite 243 blue to prevent motor screws from vibrating out prop wrench tool m5 prop tool anti static mat micro scope zip ties heat shrink bec capacitor etc, 10.5kw maximum high power farad capacitor spot welder designed for battery pack assembly and repair it features 99 adjustable power levels a color touchscreen and is capable of welding nickel sheets up to 0.4mm thick with 1750a maximum output, pla polylactic acid the most popular eco friendly and easiest to print best for prototypes decorative models and beginners polyethylene terephthalate glycol a versatile durable material combining the ease of pla with higher strength and heat resistance abs acrylonitrile butadiene styrene strong heat resistant and durable but harder to print due to warping common in functional parts thermoplastic polyurethane a flexible rubber like filament used for gaskets phonecases and soft components, large size suitable for 5 7 inch drone and fpv combat readiness trains soldiers for tactical drone operations in battlefield conditions cost effective reduces need for actual drone flights saving on hardware and maintenance costs, 5inc fpv drone with google radio battery charger best tuned for new fpn pilots flight time fo drone is 15 18min and range is aprox 1.5 km in lo, 5 or 7 fpv parts like frame motor stack elrs rx gps vtx cam antenna props battery straps etc, hardware durability and climate appropriate cooling, realistic fpv first person view drone simulator designed to teach beginners how to fly and allow veterans to practice without crashing real expensive hardware it simulates drone physics and offers deep customization enabling users to build and fly virtual drones with specific part, real view pip you can use the real view pip feature to view a picture in picture image within the goggles this allows you to view your surroundings without having to take off the headset adjustable diopter you dont need perfect vision to enjoy the goggles 3 thanks to built in diopter adjustment those who are nearsighted or farsighted can dial in a clear image the diopter can be adjusted from 6.0 to 2.0 d one tap defogging compensate for high humidity conditions and sudden changes in temperature with one tap defogging using this feature will defog the goggles 3s micro oled lenses letting you continue to enjoy a clear 1080p feed from your drone live feed monitoring using a wi fi enabled smartphone or tablet, portable and lightweight design with removable stick ends and foldable antenna features hall effect gimbals as standard for smooth centering & precise response built in led lights help visualize your switch positions sa & sd backlit lcd screen offering a perfect balance of size and functionality trim buttons for easy channel trimming external module bay compatible with radio master nano size modules and tbs nano crossfire nano tracer 2 stylish colors of charcoal & transparent version and optional case colors in blue pink green and orange to suit your style, full spectrum system supports both ac and dc power options navigations links communication links, the sky zone cobra sd goggles are the diversity version of the cobra s goggles and include a diversity receiver the goggles are 16 to 9 fpv goggles and have an lcd screen with vivid color and high luminance allowing pilots to see more details while racing pilots can wear glasses while using these goggles, range 10km 4k 120fps rec and 1080p 100fpv live
Agency / Dept :
indian army
Due Date :
Jun 22, 2026
Tender Value :
45L
View Documents
T18 Ref No : 16384445
Location : shimla , himachal pradesh
Source : GEM Tenders
tender for supply installation testing and commissioning of 315 kva, 11kv, 433v, 3 phase onan oil transformer , supply installation testing and commissioning of 11kv ht vcb panel , supply installation testing and commissioning of 11kv apfc panel , supply of 3cx95 sq.mm. xlpe insulated pvc sheathed aluminium conductor armoured power cable of 11kv grade , laying of 11 kv grade cable in the existing rcc or hume or metal pipe as required. , laying of 11 kv grade cable in the existing masonry open duct as required. , supplying and making indoor cable end termination with heat shrinkable jointing kit , supplying and making outdoor cable end termination with heat shrinkable jointing kit , supplying and making straight through heat shrinkable joint , supplying of 63 mm dia dwc hdpe pipe , laying of 63mm dia dwc hdpe pipe complete with fitting and cutting, jointing etc. , excavation of the cable trenches in hard rock , providing and laying in position cement concrete 1 to 2 to 4 ratio , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories , supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground , providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe , providing and fixing 25 mm x 5 mm copper strip , supply and fixing of fire retardant electrically insulated synthetic mat , providing and fixing 11kv high voltage level indicating danger plate, replacement of transformers ht panel apfc panel and other associated works at shimla airport, supply, installation, testing & commissioning of indoor type 315 kva,11kv/433 volts, 3 phase , 50 hz, step down , delta / star connected (dyn 11), neutral earthed, copper wound ,core type, double wound, oil immersed, onan cooled transformer having level 2 energy efficiency with octc (+) 10% to (-)10% in step of 2.5% of variation of hv, with automatic remote tape changer panel including oil conservator, explosion vent, 150 mm dial type themometer for indicating winding & oil temparature fitted in a marshalling box, silica-gel breather ,buchholz relay complete with weather proof cable end termination box on ht side suitable for termination of armoured cable of size upto 3 core 300 sq.mm on ht side, end termination box on lt side terminations of armoured cables, standard fitting and accessories , including first fill of filtered dehydrated oil etc. complete as per is 1180, level-2 as per specification enclosed. job includes, dismantling 02 nos. of existing 250kva transformers including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic., supply installation testing and commissioning of indoor type ip 42 floor mounted metal clad, 11 kv switch board vcb panel with 03 nos vcbs totally enclosed and fully interlocked, truck mounting, horizontal draw out, horizontal isolation type vacuum breaker as per is iec 62271 100 2007 and 200 2003, is 3427 as amended up to date for breakers and panels, having capacities as mentioned below, free standing extensible on both sides, single break, trip free mechanism, motorised charged and auto-manually closing breaker suitable for use on 11 kv, 3 phase, 50hz a.c. supply with rack in and rack out mechanism, air insulated but encapsulated copper bus bars capacity meeting fault level current, dc power pack, breaker featured with mechanical on- off indicator with hand trip device, breaker control tnc switch and all accessories such as shunt trip coil, and auxiliary switch of 4no and 4nc, motorised and manually operated spring assisted closing mechanism, emergency trip push button, interconnections, space heaters, earthing, etc. and equipped with following switchgears and accessories, connections suitable for cable upto 3c x 120 sqmm xlpe cable of 11 kv grade (cable entry from bottom). job includes, dismantling 01 nos. of existing ocb panel including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic. (detailed description of the item is available in attached technical specification document)., supply, installation, testing and commissioning of indoor type thyristor switched apfc panel consist of thyristors , intelligent apfc controller, thyristor firing modules, self current limiting coil complete with controls for automatic power factor improvement of capacitor bank(s) suitable for operation on 415 v, 50 hz, ac supply and to maintain the p.f. upto 0.99 lagging. fabricated from crca sheet steel enclosure made out of 2mm thick sheet steel with a common earth bus bar at rear with 2 nos earth studs at both the ends, cable alleys, 3 mm thick cable gland plates, extended rotary handles, 6 inch fans with filter for cooling etc. complete as required as per specification enclosed with the following equiped switch gears and accessories. job includes, dismantling 01 nos. of existing apfc panel including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic. (detailed description of the item is available in attached technical specification document)., supply of 3cx95 sq.mm. size of xlpe insulated pvc sheathed aluminium conductor armoured power cable of 11kv grade earthed conforming to is 7098 (part-ii) amended up to date., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 11 kv grade of following size in the existing rcc/ hume/ metal pipe as required. (a) up to 120 sq.mm., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 11 kv grade of following size in the existing masonry open duct as required. (a) up to 120 sq.mm., supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete as required. a) 63 mm dia (od - 63 mm & id - 51 mm nominal ), laying of following size dwc hdpe pipe complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 63 mm dia (od - 63 mm & id - 51 mm nominal ), excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil, refilling with excavated sand and or good soil after laying of cable/ pipe etc and disposal of surplus excavated soil as directed, within a lead of 50 metres., providing and laying in position cement concrete 1 to 2 to 4 (1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size) etc including form work etc as required., earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required., supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of copper/gunmetal nut bolt & spring washer spaced at 50mm.), providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required., providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required., supply and fixing of fire retardant electrically insulated synthetic mat of class b, 2.5 mm thick suitable for all ac voltages up to 11 kv meeting requirements of is 15652(2006) tested for breakdown strength, tensile or elongation, aging properties, insulation resistance, effect to acid, alkaline, diesel, transformer oil & leakage current test, fire test etc. having minimum width of 1000 mm + or - 20 mm along with all allied materials such as pu-resin, chemi bound, special pvc adhesive, liquid primer etc. in what so ever quantity required to complete the job as per site conditions and as per instructions from engineer-in-charge., providing & fixing size 200 mm x 150 mm size 11kv high voltage level indicating danger plates made of mild steel at least 2 mm thick & vitreous enamelled white on both sides & with inscriptions of voltage level danger red colour on front side as read.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 13, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16140593
Location : bareilly , uttar pradesh
Source : GEM Tenders
tender for screw driver 2 in 1 , cutting pliers , pipe wrench , t tommy set , hand gloves , 5 ton jacks , 2.5 ton jack , torque wrench , bag 16 inch , head lamp , injector puller , soldering hammer dent puller kit , clamp meter , soldering machine computer , steel box , general tool kit , compact screw driver set, reqmt of tool and eqpts, bit types - commonly comes with a slotted tip and a phillips tip, blade length- ranges between 100 mm to 250 mm, shaft material - high-grade carbon steel, chrome vanadium, silicon-manganese steel for high torque and wear resistance, tip hardness- typically ranges from 50 to 58 hrc, tip hardness- typically ranges from 50 to 58 hrc, handle-ergonomic, high-grade plastic or rubber offering an anti-slip, oil-resistant, and comfortable grip, special features- many models feature magnetized tips to hold screws and insulation for electrical safety, material- high carbon steel or chrome vanadium steel for rust resistance and durability, cutting edge hardness- ranges from 52 to 60 hrc, usually achieved via induction hardening to ensure clean, sharp cuts without chipping, 150mm - ideal for fine electronics, copper, lastic cutting, and household tasks, 200mm - high-leverage models ideal for thicker gauge wire, nails, and cables. insulation-many electrical models feature heavy-duty insulated sleeves rated for 1000v ac, 8 inch (200 mm)- suitable for pipes up to 20 mm with a max capacity of 25 mm, 10 inch (250 mm)- suitable for pipes up to 34 mm (1 inch) with a max capacity of 38 mm (1.5 inches), 14 inch (350 mm) - suitable for pipes up to 48 mm (1.5 inches) with a max capacity of 50 mm (2 inches), material- typically forged from high-grade manganese steel, chrome-vanadium, or high-tensile carbon steel, finish- often coated with chrome plating, bright zinc, or black phosphate to resist rust and corrosion, length- varies greatly based on application ranges from 150 mm (6 inches) for light fasteners to 750 mm for heavy industrial box, rod thickness (diameter)- commonly available in 6 mm, 8 mm, 10 mm, 12 mm, and 16 mm rod diameters to fit varying socket spanner hole sizes, design-stepped or tapered ends are often implemented to allow one bar to fit multiple spanner sizes, abrasion resistance - graded 1 to 4, blade cut resistance - graded 1 to 5, tear resistance- graded 1 to 4, electrical safety- insulating gloves are rated by voltage classes (class 00 for up to 500v up to class 4 for 36,000v), capacity - 5 ton -single acting with mechanical lock nut. stroke- minimum 50 mm type of saddle - grooved saddle suitable for heavy engineering fabrication site. pistons - chromium plated pistons. pump - pressure at 700 bar safety feature - suitable blow out protection. closed height - maximum 100 mm, oil tank of suitable capacity with level indicator, built in relief valve, drain plug, operating lever etc. should be designed for use in all positions and alloy steel construction for easy handling. return spring mechanism suitable for heavy engineering industry. pressure gauge of suitable size with capacity 0 to 1000 bar. should have adequate mechanism to prevent dust debris etc from entering to the hydraulic system. high pressure flexible hose of around 3 meter with quick connect disconnect coupler at both ends. item should be suitable for rugged open area operating conditions and should withstand the extreme weather in dusty, rainy and moist coastal cochin environment and deliver superior and highly reliable operational performance. seals used should be able to perform in the above conditions without leakage and should be capable to offer long service life. relevant test certificates and its procedure shall be submitted during technical evaluation and supply. supplier to provide detailed technical brochure, operational and maintenance manual with spares part list during technical evaluation and supply. warranty- one year from the date of commissioning and acceptance at csl, load capacity- 2.5 ton, lifting range- standard models typically range from 140 mm to 460 mm, while low-profile jacks can reach minimum heights as low as 85 mm to clear lowered vehicles, weight- ranges between 13.5 kg and 26 kg heavy-duty workshop models, pumping mechanism- available in single-piston or dual-piston which provides a quicker, more effortless lift, safety- built-in overload protection valves and 360-degree swivel rear casters for precise placement, drive size - dictates the size of the square drive connecting to the socket, 1 oblique 4 inch drive- best for small fasteners, delicate tasks, and bicycles, 3 oblique 8 inch drive- the most versatile for general mechanical work and tight spaces, 1 oblique 2 inch drive- standard for automotive repair, lug nuts, and heavy equipment, 3 oblique 4 inch and 1 inch drive- used for heavy-duty industrial and commercial applications, torque range- the minimum and maximum rotational force the tool can accurately measure 10 to 150 ft-lbs or 13.6 to 203.5 nm, accuracy- industry standard is usually between plus minus 3 percent and plus minus 4 percent, type size-16 inch, material-nylon, demension-460x230, special feature-adjustable light modes, adjustable strap, high power, long range, rechargeable, colour -black, power source- battery powered, light source type-led, manual slide hammer kits- typical weight ranges from 1.4 kg to 3 kg for general-purpose pulling. these include deep open-profile sockets usually 25 to 30 mm and interchangeable adapters to screw directly into the injectors fuel inlet or body, pneumatic puller sets- designed for highly seized injectors, these use air vibration systems. they operate at a working pressure of 5 to 8 bar and can deliver around 300 to 900 strokes per minute to dislodge carbon lockups, mechanical bridge puller bars- used alongside a slide hammer, these span the top of the cylinder head to provide a safe, lever-based upward pulling force, product type-special automotive set, pieces per set-12 pcs, commonly used tool set to use on body panel and vehicle chassis, designed to work on body repair, chassis, bumper ends, fender edge, door, door edge etc or other unique pulling applications, heavy duty slide hammer action with 10 lbs hammer and various, attachments- slide shaft, slide hammer, washer, slide shaft handle, flat, pipe, large hook type plate, small hook type plate, 90 angle thick hook, plate, 90 angle thin hook plate, two hole pipe, flat plate, chain & hook, screw puller to suit different pulling jobs, current ac and dc- indicates the maximum alternating or direct current the jaw can measure without breaking the circuit. ranges generally span from 0 to 400a up to 0 to 2500a often achieved via flexible probes, safety category cat rating- dictates where the meter can be safely used without risk of arc flash. standard ratings include cat iii for distribution panels commercial environments and cat iv for utility and service drops. display counts- higher resolution screens 6,000 to 10,000 counts provide more precise numerical readouts before needing a range change, true rms- essential for testing modern electrical equipment-it calculates the root-mean-square of non-linear waveforms, power consumption- 30w, power source-230v ac, cable length- 1.5 meter, warranty -3 year, carry bag and all accessories, material-galvanized iron (gi), stainless steel (ss), or mild steel (ms), thickness- ranges from 0.5 mm to 2.0 mm, finish- multi-layer anti-rust, powder, or chrome coating, capacity-typically 60 kg to over 500 kg, features- often include heavy-duty side handles, hasp and staple sets for padlocks, and reinforced lids, general tool kit consist of the items- spanner ring 18x19,16x17, 20x22, 14x15,10x11, 12x13, 8x9, 6x7, 7x8, spanner open jaw 20x22, 18x19, 16x17, 12x13, 14x15, 10x11, 8x9, 7x8, hammer 250, pipe wrench, piece count- 38 pieces (23 bits, 7 nut setters, hand screwdriver, extension, etc.), bit types- phillips (ph), slotted (sl), hex, and torx (tx), build- polished chrome and premium s2 steel, compatibility- compatible with manual screwdrivers and most major power tool brands
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15912276
Location : aligarh , uttar pradesh
Source : GEM Tenders
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26, procurement of spare parts, power contactor 16a at 415v ac coil 24v dc model3tf32 00 0bb4 power contactor biasing damper 24vdc siemens, siemens 3rh1921 1ba01 auxiliary contact block make siemens model 3rh19211ba01 type front top mounted auxiliary contact block contacts 1 no normally open electrical ratings pilot dutyac a600 600 v ac 10 a continuous dc q600 300 v, siemens 3rh19211ca01 auxiliary contact block make siemens model 3rh19211ca01type front top mounted auxiliary contact block contacts 1 nc electrical ratings pilot duty ac, siemens 3tf30 100a power contactor aa11 make siemens model 3tf30 100a type power contactor poles 3 main poles rated operational current ac3 9 a at 415 v ac auxiliary contacts 1 no integrated coil voltage 110 v ac 50 60 hz rated insulation voltage ui 690 v utilization category ac3 ac4 mounting din rail or screw mounting standards iec 6094741 is iec60947 4 kw at 400 v ac power contactor silo, 3ua52 002a thermal overload relay make siemens model 3ua52 002a type thermal overload relay current range 10 16 a trip class 10a reset mode manual automatic auxiliary contact 1 no 1 nc rated insulation voltage ui 690 v mounting direct mount to siemens 3tf30 31 contactors or separate base protection of motors against overload phase failure and unbalanced load standards iec 6094741 thermal overload relay swas, siemens 3th30 220a auxiliary contactor relay make siemens model 3th30 220a type auxiliary contactor relay contacts 4 2no 2nc rated operational current ie 10 a ac15 4 a at 230 v 2 a at 400 v rated insulation voltage ui 690 v coil voltage 110 v ac 50 60 hz standard compliance iec 6094751 mounting din rail or panel mounting, semiconductor fuse rating 10a size 000 make siemens, semiconductor fuse rating 2a size 000 make siemens, semiconductor fuse rating 4a size 000 make siemens, semiconductor fuse rating 6a size 000 make siemens, auxiliary contactor coil dc with 2no 2nc contacts model 3th30 22 0bb4 siemens, motor protection with overload relay function mpcb biasing damper 24vdc motor protection circuit breaker size s00 with overload relay model 3rv2111 1da10 overload release setting 22 32 a short circuit release 42 a size s00 function motor protection w overload relay connection type screw terminal screw terminal suitable motor 400v 11 kw biasing damper 24vdc, type 3 pole contactor model 3ts30 100a make siemens specifications type 3 pole contactor coil voltage 230v ac power rating at 415v 4 kw approx auxiliary contact 1 no rating ac1 25 a ac3 9 a utilization category standard ac3 duty motor application up to 4 kw 415v 3 phase3 power contactor higher rating mcb swas make siemens, type 3 pole power contactor make siemens series sirius model 3rt2015 2ab01 coil voltage 24v ac 5060 hz utilization category ac1 18 a ac3 7 a rated voltage up to 690 v motor rating ac3 1point 5 kw 230v 3 kw 400v 4 kw 690v auxiliary contact 1 no 1314 built in terminals main 1l1 3l2 5l3 2t1 4t2 6t3 coil a1 a2 mounting din rail panel standard iecen 60947 41 power contactor silo, motor starter protector mpcb silo motor protection circuit breaker size s00 model 3rv2011 1aa10 standard mpcb size s00 trip function thermal magnetic main application simple motor switching protection connection type screw terminal screw terminal number of poles 3 adjustment range current 1point 1 to 1point 6 a instantaneous release magnetic 21 a trip class 10 operational voltage 20 to 690 v ac insulation voltage 690 v ac surge voltage resistance 6 kv mains frequency 5060 hz mpcb silo, type 3 pole contactor model 3ts30 100a make siemens specifications type 3 pole contactor coil voltage 230v ac power rating at 415v 4 kw approx auxiliary contact 1 no rating ac1 25 a ac3 9 a utilization category standard ac3 duty motor application up to 4 kw 415v 3 phase3 power contactor higher rating swas make siemens, thermal overload relay model 3us50 001k8k current range 8 12point 5 a tolr swas construction of ordination type 2 25a type 3na make siemens, add on auxialiry contact block no 3tinto 4010 2a swas, add on auxialiry contact block nc 3tinto 4001 2a swas make siemens, mcbs siemens model 5sl4202 7rc type mcb poles 2p rating 2 amp c2 voltage 415v swas width modules 2 modules 36 mm 5000169057, mcbs siemens type mcb model 5sl4420 7rc type mcb rating 20 amp c20 voltage 415v poles 2p width modules 4 modules 72 mm swas, mcbs siemens model 5sl4202 7rc type mcb poles 2p rating 63 amp c63 voltage 415v width modules 3 modules 54 mm swas, siemens 3th30 220a auxiliary contactor relay make siemens model 3th30 220a type auxiliary contactor relay contacts 4 2no 2nc rated operational current ie 10 a ac15 4 a at 230 v 2 a at 400 v rated insulation voltage ui 690 v coil voltage 110 v ac 5060 hz standard compliance iec 60947 51 mounting din rail or panel mounting, power contactor model 3tf31 100a 230vac coil 1no ac1 20a ac3 12a make siemens current rating ac3 12 amp power rating at 415v 55 kw utilization category heavy duty ac3 duty poles 3pole, motor starter protector mpcb silo motor protection circuit breaker size s00 model 3rv2011 1ga10 standard mpcb size s00 trip function thermal magnetic tm release main application simple motor switching protection connection type screw terminal screw terminal number of poles 3 adjustment range current 45 63 a magnetic trip instantaneous release magnetic 82 a trip class 10 operational voltage 20 to 690 v ac insulation voltage 690 v ac surge voltage resistance 6 kv mains frequency 5060 hz, sipar ps2 har positioner make siemens model no 6dr5123 0nn01 0aa4 iw 420ma p 147bart ta 30 to 60 deg c ip66 nema 4x encl type4x
Agency / Dept :
uttar pradesh rajya vidyut utpadan nigam limited UPRVUNL
Due Date :
Jul 06, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15957929
Location : bhilwara , rajasthan
Source : GEM Tenders
tender for turnkey procurement supply installation testing and commissioning of rac trade lab tools equipment at govt iti gulabpura bhilwara hack saw metal frame fixed , snip sheet metal curved nose , stakes different types , tin smith , knife folded stainless steel , tong close mouth and pick , welding table for gasor arc , flaring tool set single type for tube , swaging tool punch type set of size for tube , pinch of tool for copper tube , piercing pliers and reversing valve with access fitting , pipe or tube bender lever type , torque wrench , megger , service oscillator , c r o single beam , c r o dual traceor double beam , electronic leak detector , multi meter analogue type , fin straightenedor fin comb , dial thermometer with armored capillary dial , compressors testers for small hermetic compressors , temperature andhumidity recorder , split phase induction motor , bldc motor with controller , idu pulse generation type motor , capacitor start induction motor , ac 3 phase motor 400or 50 hz , portable air - lpg brazing kit , frost free refrigerator , threeor four door refrigerator inverter type , bench drilling machine , grinding machine , evacuating and charging station as above but fitted with weighing scale , two stage rotary vacuum pump 3or 4 cfm , window a c , split a c , duct able split a c 1 5 ton , recovery unit with cylinders , cassette air conditioner , fan coil unit , shell and tube dx chillers small , circulating water pump small , rotary hermetic compressor , bottle cooler visible , deep freezer , display cabinet , water cooler storage type , water dispenser bubble type hot and cold , ice candy plant , air conditioning indirect system water cooled , car ac tutorial model , bus ac tutorial model , automatic ice cube machine , glass board portable , chart stand , desktop computer , lcd projector or led or lcd tv big size , laptop , storage shelf, frame material heavyduty size 300 mm, length 200mm type curved nose material forged steel cutting edge hard and tempered, type grooving stake length 15 inch material options tool steel or cast iron number of grooves 10 different sizes purpose designed for creating various grooves in sheet metal work, length 400 mm graduation marked with both millimeters and inches material tool steel, type folded knife blade type double blade for electricians blade length 150 mm blade material stainless steel features folded system with two blades, tong close mouth and pickup good quality material mild steel, the gas or arc welding table with dimensions featuring a frame made of m s angle 50x50x6 mm and a top plain sheet designed to hold fire bricks along with a positioned stand made of m s pipe is generally used for robust welding tasks the specifications typically include table frame m s angle 50x50x6 mm stan m s pipe additional features complete with clamps and fire bricks extra bricks 06 nos, material block and cone made of alloy steel and hard tempered nickel chrome plated flaring capability can flare copper tubes with the following outer diameters 1or 2 inch 7or 16 inch 1or 4 inch 3or 16 inch 3or 8 inch 5or 8 inch and 5or 16 inch, function able to swage copper tubes with the following outer diameters 1or 2 inch 7or 16 inch 1or 4 inch 3or 16 inch 3or 8 inch 5or 8 inch and 5or 16 inch, the pinch-off tool for copper tubes with a diameter of 6mm to 18mm tube size compatibility 6mm to 18mm dia material chrome-plated for corrosion resistance and durability function designed to crimp or pinch-off copper tubes effectively, the piercing pliers and reversing valve with access fitting for 6-18mm tool type piercing pliers and reversing valve fitting size 6-18mm application typically used for hvac systems refrigeration and other applications requiring precise piercing and valve operation, type tube bender lever type tube compatibility 3 mm to 16 mm material chrome plated features lever type design for easy and precise bending suitable for bending tubes made of various materials like copper brass aluminum and steel graduated markings for accurate bending up to 180 degrees durable and corrosion-resistant chrome plating set includes 5 pieces set, length 300mm type ratchet type size 12 7mm material high-quality chrome plated steel features ratchet type forward reversible and locking arrangement, voltage range test voltages up to 1000v dc insulation resistance range typically from 0 01 m ohm to 200 m ohm display analog pointer, frequency range 100 khz to 30 mhz in 9 ranges power supply 220v plus minus 10persantage 50 hz accessories test lead banana rca and operating manual, specification of c r o single beam 5 mhz bandwidth dc 20mhz channels two channels trigger system automatic and normal level adjustable sources ch i ch ii alt line external slope positiveor negative coupling ac dc gnd trigger bandwidth 40 mhz computer interface usb crt 100 mm with accessories, bandwidth dc 60 mhz channels 2 channels trigger system automatic and normal level adjustable sources ch 1 ch 2 line external slope positiveor negative coupling ac dc gnd trigger bandwidth 60 mhz computer interface usb component tester built-in single touch continuity tester with beeper accessories two 10x probes two bnc-bnc cables power cord manual and calibration certificate, specifications electronic leak detector super sensitive function enhances sensitivity beyond standard settings for detecting small leaks especially with gases like refrigerants r134a r-404a r-410a r-407c r-22 sensitivity levels 3 sensitivity levels probe intelligent tip design to minimize false alarms by sensing environmental conditions flexible probe for accessing difficult-to-reach areas display six vertical led indicators red yellow or green provide relative signal level of detected leak selected sensitivity range lowor mediumor high diagnostic information includes low battery interference wait times contaminated atmosphere unit readiness or faults refrigerants detects all refrigerants cfcs hcfcs hfcs and blends sensor life 2000 hours sensing element heated tin oxide operating temperature range 0 to 140 degree f response time less than 1 second battery life 30 hours keypad functions onor off turns the unit on or off, type large size analog multimeter with automatic circuit breaker scale single scale for both ac and dc voltage with improved scale graduation features automatic circuit breaker for protection ac and dc amps share common jacks equipped with a plus minus polarity reverse switch accessories essential accessories such as test leads probes etc instruction manual suitable battery, designed for straightening the fins of condensers and cooling coils in air conditioning and refrigeration systems type fin straightenedor fin comb usage designed for straightening the fins of condensers and cooling coils fin spacing suitable for fins with spacings of 8 9 10 12 14 and 15 fins per inch compatibility can be used on both metal and plastic fins, dial thermometer type dial thermometer with armored capillary dial temperature range minus 50 degree c to plus 50 degree c capillary tube armoured to protect the capillary from physical damage and corrosion dial material stainless steel or durable plastic mounting comes with a mounting bracket or clip features armoured capillary provides protection for the capillary tube making it more suitable for rugged environments temperature range suitable for low temperature applications such as refrigeration or environmental testing dial face clear and easy to read with a scale marked for precise readings, the compressor tester for small hermetic compressors with electrical inputor output indicating facilities are as follows purpose testing of pressure testing of efficiency testing of current and voltage components fitted in the compressor tester digital voltmeter digital ammeter digital suction gauge digital pressure gauge digital energy meter time delay relay dimmer state lp hp cutout solenoid valve ms cylinder with gauge main switch air purge valve three-point socket 15 amp 5 amp charging lines gauge manifold temperature indicator test bulb tong tester main supply lead testing leads wiring and controls fixed on a sun mica panel board mounted on an ms mild steel stand, temperature and humidity recorder with the capacity to record data for 24 hours specifications recording type digital or analog recording duration 24-hour recording capability or longer durations display lcd or led display for real-time monitoring recording medium paper chart analog or digital memory digital power supply battery-operated or mains powered with backup battery, power output 1 hp horsepower voltage 230 v single phase frequency 50 hz speed typically 1440 rpm to 1750 rpm current fulll oad current around 7 8 a starting mechanism split phase starting mechanism with a start winding and a run winding centrifugal switch to disconnect the start winding after the motor reaches a certain speed construction enclosed fan-cooled tefc or open drip-proof odp housing ball bearing or sleeve bearing mounting foot-mounted or flange-mounted protection overload protection through thermal overload relay or built-in thermal protection, motor type brushless dc bldc motor power output 15 to 30 watts voltage 315v dc speed range 3000 to 4000 rpm revolutions per minute control type electronic speed controller esc phase 3-phase cooling air-cooled or fan-cooled components 1 forwardor revers switch 2 amp meter digital type 3 rpm meter digital type 5 mcb 6 main switch supply cord with pin top all components fit on panel, motor type pulse generation type power output 15 watts voltage 230v ac frequency 50or 60 hz speed 1500 rpm efficiency high efficiency control type integrated pulse generator for precise control cooling air cooled or fan cooled mounting type flange or base-mounted, motor type capacitor start induction motor power output 1 horsepower hp voltage 230v ac frequency 50or 60 hz speed 1440 to 1500 rpm revolutions per minute phase single phase starting method capacitor start capacitor typically 60 80 micro f microfarads for starting mounting type foot mounted or flange-mounted cooling air cooled, motor type ac induction motor power output 2 horsepower hp voltage 400v ac frequency 50 hz phase 3 phase speed 1440 to 1500 rpm revolutions per minute mounting type foot mounted or flange mounted cooling air cooled with fan, cylinder capacity 5 kg lpg cylinder material high-quality steel valve standard lpg valve with safety features torches type air-lpg brazing torches material brass or stainless steel nozzles interchangeable 5 nozzles for different flame sizes ignition automatic ignition hoses length typically 5 meters material high-pressure resistant rubber connections standard lpg fittings with secure clamps stand material metal or durable plastic design stable base with a holder for the cylinder and torch accessories regulator pressure regulator for precise control safety equipment safety goggles gloves and flame arrestors, capacity 200 litres and above features handle toughened glass shelves warranty card included refrigerant r 600a energy rating three star rating additional requirements manufacturer authorization required, capacity 300 to 350 litres type inverter type refrigerant hc r-600a energy rating three star rating features threeor four doors warranty card included additional requirements manufacturer authorization required, type bench type drill machine hand feed and gear drive type motorized model v belt driven with v pulley rack and pinion for slotted swivel table and base swivel table mounted on a sturdy c i arm with locking system drilling capacity 20 mm spindle nose mt 2 spindle travel 125 mm surface 200 mm rpm 200-2500 motor 1 hp 1440 rpm 3 phase 440 vac drill chuck with arbor mt2 and key 20 mm capacity accessories pump motor 0 1 hp with coolant tank and its complete fittings suitable starters switch for motors and electrical fittings drill machine vice 100 mm jaw drill drift service tool kit allen keys and spanners as per machine safety guard of motor and pulley, type pedestal grinding machine with a standard size fabricated pedestal stand wheel double ended heavy duty wheel size 200 x 25 mm rough and smooth electric motor power 0 5 hp phase 3 phase voltage 440v speed 3000 rpm running speed winding copper wire attachments twist drill grinding attachment tool rest adjustable tool rest on both sides control switch onor off four-position rotary triple pole control switch, components rotary two-stage vacuum pump and motor features gas ballast and anti-suck back capability pulling vacuum up to 50 microns of hg connection for vacuum hold test with solenoid valve and switch manifold with gauges and valves capability pulling vacuum up to 50 microns of hg weighing scale type digital capacity 10 kg additional features supplied with 3 charging lines 1 metre each instruction manual included, two stage rotary vacuum pump evacuation capability capable of evacuating to 50 microns of hg features fitted with gas ballast anti-suck back valve motor single phase motor, type window a c 1 ton with remote trainer with fault simulation unit components 1 compressor new reciprocating sealed compressor certified by the principal manufacturer with a warranty card and serial number capacity 1 ton 2 condenser air-cooled compatible with 1 ton compressor 3 condenser cooling fan compatible capacity permanent lubricated motor 4 expansion device capillary tube with compatible capacity 5 evaporator compatible with 1 ton made of copper tube and aluminum fins fitted with a compatible capacity fan 6 lp and hp pressure cut out switch 7 pressure gauges glycerine filled suction and discharge gauge 8 safety control overload and overcurrent protection for compressor with time delay circuit 9 temperature sensor digital temperature controller 10 temperature measurement digital temperature indicator with multi-channel switch 11 ampere meter and voltmeter for measurement of voltage and current 12 energymeter for measurement of energy consumption 13 other accessories hand shut off valves filter drier thermostat pressure gauges fault simulation there should be a fault switch bank of a minimum of 7-8 standard faults by inserting these faults the effects on the system can be studied mounting all accessories will be mounted on a rigid base frame made of m s mild steel pipe and g i galvanized iron powder-coated paint additional requirement manufacturer authorization required, type 1 5 ton split ac trainer with a fault-finding simulator capacity 1 5 ton refrigerant eco-friendly varies by model compressor type reciprocating or equivalent components and features 1 compressor new reciprocating or similar compressor manufacturer certified with warranty suitable for 1 5 ton capacity 2 condenser air-cooled with compatible capacity for 1 5 ton system 3 evaporator copper tube with aluminum fins compatible capacity fan 4 expansion device capillary tube or equivalent 5 controls and instruments lp and hp pressure cut-out switches glycerine-filled pressure gauges suction and discharge digital temperature indicator with multi-channel switch ampere meter and voltmeter for electrical measurements energymeter for energy consumption measurement 6 safety features overload and overcurrent protection with time delay circuit fault switch bank with multiple fault simulations typically 7-8 faults accessories hand shut-off valves filter drier thermostat construction mounted on a sturdy base frame usually m s pipe and g i powder-coated sheet additional considerations training and educational use designed for training purposes to simulate real-world faults and system responses manufacturer authorization required, a working model of a ductable split a c 1 5 ton trainer with fault simulation and eco-friendly refrigerant includes the following capacity 1 5 tons compressor type reciprocating compressor for durability and reliability in training environments refrigerant eco-friendly refrigerant to comply with environmental regulations and promote sustainability fault simulation integrated fault simulation system with various simulated faults for training purposes examples include electrical faults capacitor failure compressor overload refrigerant flow issues sensor malfunctions etc construction robust construction suitable for educational and training environments often with clear panels to visualize internal components and processes air handling unit ahu ductable design with an ahu suitable for ducted installations ensuring efficient air distribution safety features includes safety features such as overload protection emergency shutdown and clear labeling for educational purposes environmental compliance uses eco-friendly refrigerants promoting sustainability and compliance with modern environmental standards, recovery unit with cylinders for cfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included recovery rates components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for cfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, recovery unit with cylinders for hfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for hfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, recovery unit with cylinders for hcfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for hcfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, cassette air conditioner 1 5 ton type cassette air conditioner technology digital inverter technology refrigerant eco friendly copper tubing suction line and liquid line included with insulation mounting indoor unit mounting bracket included outdoor unit mounting bracket included outdoor unit service valve fitted control remote control included warranty warranty card provided manufacturer authorization required, fan coil unit with water valves type fan coil unit fcu water valves includes both 2-way and 3-way valves cooling coil material copper tube configuration two rows air filter included for filtration grill included for air distribution blower motor type suitable single-phase blower motor mounting wall or ceiling-mounted depending on design, shell and tube dx chillers small - 5 ton type shell and tube dx chiller capacity 5 tons approximately tubing material copper number of tubes 32 to 36 outer shell heavy-duty construction length 48 inches diameter 8 inches finned tubes copper fins mounting plates included for installation, small circulating water pump power rating 1 hp type single-phase motor winding material copper certification isi marked or star rating pump type self-priming tank material stainless steel capacity 20 liters inletor outlet provision both fitted on the tank frame metal frame for supporting the pump and tank make and model required, 2-ton rotary hermetic compressor specifications type rotary hermetic compressor capacity 2 tons refrigerant echo friendly voltage 220-240v or 50hz phase single-phase electrical starting accessories includes starter capacitor relay and other necessary components for proper operation, bottle cooler visible 200 l capacity general specifications inner volume minimum 200 litres refrigerant eco-friendly refrigerant compressor reciprocating compressor certified by the principal manufacturer with warranty card evaporator forced convection type lighting internal cabinet light for visibility warranty includes warranty card manufacturer authorization required detailed components compressor type reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number evaporator type forced convection interior and exterior inner and outer body made of durable food-grade materials for safety transparent door made of tempered glass for visibility durable construction for long-term use lighting internal led light for better visibility of contents temperature control digital thermostat for temperature control additional features lockable door for security energy-efficient operation noise reduction technology warranty includes warranty card for compressor and other critical components manufacturer authorization manufacturer authorization required, deep freezer 200 l capacity general specifications inner volume minimum 200 litres refrigerant eco friendly refrigerant temperature range up to minus 18 degree c compressor reciprocating compressor certified by the principal manufacturer with warranty card detailed components compressor type reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number temperature control digital thermostat for precise temperature control temperature range up to minus 18 degree c cooling system efficient cooling system with rapid cooling capabilities high quality insulation to maintain consistent temperature interior and exterior inner and outer body made of food grade materials for safety durable construction for long term use warranty includes warranty card for compressor and other critical components manufacturer authorization manufacturer authorization required, display cabinet 2 ton capacity general specifications cabinet material food grade stainless steel and transparent toughened glass cabinet dimensions length 6 ft width 27 inches height 4 ft with round glass shelves 2 shelves and 1 bottom shelf made of food grade stainless steel back door sliding back door with glass components compressor type new reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number capacity 2 ton thermostatic expansion valve suitable size for the system condenser type air cooled condenser fan heavy duty energy efficient new fan motor with copper winding and condenser housing, water cooler storage type 200 liters general specifications storage capacity 200 liters cooling capacity 150 liters per hour compressor type reciprocating compressor refrigerant charged with echo friendly refrigerant construction material structure and tank made of food-grade stainless steel insulation tank with puf insulation tank lid equipped with a lock facility, water dispenser bubble type hot and cold general specifications delivery capacity 2 5 to 3 liters per hour cabinet capacity up to 20 liters functions hot cold and normal water dispensing display led display indicator hot water dispensing equipped with a lock for safety refrigerant charged with echo friendly refrigerant construction type floor-mounted faucets 3 faucets for dispensing water bottle supply unit supplied with a 20 liter transparent food-grade bottle, ice candy plant 2 ton capacity specifications capacity 2 ton temperature range 20 c to minus 30 degree c ice candy production capacity to make 32 ice candies at a time with forma tray construction stainless steel tank on trolley puff insulated stainless steel body compressor type hermetic reciprocating compressor capacity 2 ton certification tested and certified by principal manufacturer with warranty card and serial number condenser type air-cooled capacity 2 ton features heavy duty fan copper tube and aluminum fins housing brine cooling system material stainless steel with lid and lid holding angle features window for brine filling and drainage with valve facilities thick insulation agitator motor agitator water pump food grade stainless steel tank and cooling coil made of copper tube forma tray food grade stainless steel minimum 32 candy capacity proper fixing system in brine tank expansion device arrangement thermostatic expansion valve with hand shut off valve controls and gauges hp and lp cut out switch liquid line indicator receiver with inlet and outlet valve solenoid valve solid core filter drier suction accumulator pressure gauge glycerin type compound gauge glycerin type thermostat digital type hydrometer digital type temperature meters digital led type for brine temperature discharge line temperature and suction line temperature amp meter digital type energy meter digital type voltmeter digital type mcb 2 pole as a main switch with supply cord and pin top fault detection minimum eight faults switch bank for detecting various operational faults additional features heavy duty iron frame control panel fitted on powder coated g i sheet system charged with refrigerant instruction manual with fault finding wiring diagram maintenance tips and brine condition for different temperatures, air conditioning indirect system water cooled with humidity control general specifications cooling capacity 2 tons components compressor type reciprocating sealed compressor capacity 2 tons, compressor type new wobble plate type make and model number to be provided condenser type parallel flow type suitable for cars evaporator type serpentine type components thermostatic expansion valve blower motor and grill receiver features with sight glass and other necessary accessories controls type all ideal controls and safety controls for car aor c electric motor type suitable single-phase electric motor isi marked copper winding to run the compressor make and model number to be provided dc power supply components powered condenser fan evaporator fan and magnetic clutch of the compressor fault switch bank type includes standard faults like compressor clutch fault evaporator fan fault condenser fan fault etc additional accessories components onor off switch fan speed selector switch complete wiring jack and clips digital temperature indicator included in the test chamber test chamber size 3x3x6 ft lxwxh construction made of 18mm sun mica board with a door facility size 3x6 ft in an angle iron frame with an inspection glass window 1 5x2 ft towards the aor c unit condition system in running condition with refrigerant charged, specifications automobile bus aor c compressor type new automobile bus aor c compressor make and model number to be provided condenser type parallel flow type designed for buses fans two axial dc fans cooling coil type suitable for buses components expansion valve two blower motors six small grills mounting mounted on the test chamber receiver features with sight glass and all necessary accessories control and safety controls all ideal control and safety controls electric motor type suitable new electric motor with copper winding to run the compressor make and model number to be provided dc power supply components powered condenser fan evaporator blower and magnetic clutch of the compressor additional accessories components onor off switch fan speed selector switch complete wiring and a digital temperature indicator in the test chamber fault switch bank includes six standard faults like compressor clutch fault evaporator blower fault condenser fan fault thermostat fault test chamber size 8x4x6 ft lxwxh construction blower housing made of sunmica board with door facility in an angle iron frame with inspection glass window mounting complete system fitted on a four wheeled heavy duty steel trolley condition system in running condition with refrigerant charged, automatic ice cube machine with a capacity of 50 to 55 kg per day specifications capacity 50 to 55 kg of ice cubes per day control panel digitally controlled touch screen panel storage capacity 14 kg to 27 kg of ice cubes cooling method fan-cooled water connection facility for connection with a tap or direct water line body material stainless steel for durability and easy maintenance compressor energy-efficient charged with eco-friendly refrigerant special features automatic stop and start noiseless operation compact and elegant design storage bin in built manufacturer authorization required with a guarantee card, 2 5 inch x4 inch with stand, 6 inch x3 inch providing with hanging clip top and bottom plate, parameter generic technical specification processor intel i3 4 core or higher with minimum turbo boost 2 4 ghz or higher base frequency 12 mb cache or higher with 14th or higher generation and to be certified by oem chipset compatible chipset operating system 1 pre-installed oem certified genuine microsoft windows 11 professional 64 bit or higher memory ram 8 gb or higher ddr5 4400 mhz or higher with 64 gb expandability storage 512 gb ssd graphics integrated hd graphic card or highe ports minimum 5 usb ports with at least 2 usb 3 0 or higher ports hdmi display port audio jack for headphone and microphone display minimum 21 inch or higher resolution 1600x900 or higher display antivirus minimum 3 years subscription antivirus with protection for ransomware browsing phishing along with oem undertaking to be provided model specific certification bis for monitor only keyboard and mouse usb keyboard and usb two button optical mouse same make as desktop and mouse pad network interface integrated 10or 100or 1000 gb ethernet integrated 802 11ac wi-fi and bluetooth 5 0 or higher form factor smallor slim form factor or minior micro tower accessories all necessary cables expansion slots minimum two pcie slots warranty 3 years comprehensive on site oem warranty and it should be mentioned on the oem website and it should be mentioned on the oem, parameter generic technical specification technology dlp projection method front and rear both minimum resolution xga 1024 x 768or wxga 1280 x 800 brightness minimum 3300 ansi lumens for color light and white light output both contrast ratio 15000 1 aspect ratio minimum 4 3 lamp type uhe lamp life minimum 6000 hrs normal mode and 12000 hrs in eco mode wireless connectivity bluetooth and integrated wi-fi ior o connection vga hdmi usb warranty 3 years comprehensive on site oem warranty and it should be mentioned on the oem website, processor intel i3 minimum 4 core or higher with minimum turbo boost 2 4 ghz or higher base frequency, material mild steel powder coated or paint coated product type free standing unit with glass panel
Agency / Dept :
department of technical education DTE
Due Date :
Jul 13, 2026
Tender Value :
32.07L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16213388
Location : jalpaiguri , west bengal
Source : GEM Tenders
tender for vtx , xt30 , flight controller , 3 inch mini soccer training device , soccer training device rotor or brushless motor , external hdd , adapter for cctv, training device spares, digital vtx long range up to 15 km dual band high power output variable options pit mode and 25mw to 2.5w plus 7cb stable signal signal should not drop when heated wide voltage input direct 6s battery 6v to 25.2v supported onboard filtering tvs diode motor noise and voltage spikes protected smart audio tramp protocol goggle or radio hi band channel power changing feature frequency lock on no interference during frequency drift and multipilot flying, high amperage capability standard jst connectors to bear current upto 30a low resistance gold plated bullet pins for constant voltage secure locking tight fitting design to bear high speed flight and hard crashes heat resistant nylon material to bear from high temperature in soldering and melting polarity protection shrouded and asymmetric shape for positive and negative terminals, inbuilt gps inbuilt compass inbuilt accelerometer multiple rc pwm output multiple ibus port power 5 watt, 1800 mah long range endurance battery wide connectivity anti crash light weight flight time minimum 30 minutes high durable carbon fiber fully enclosed 360 degree plastic polycarbonate 3 inch prop size light weight design turtle mode flip over after crash high rpm motor 1404 to 1506 series with 3000-4500kv aio flight controller fc+esc and protected electronics fc and vtx and camera should be in the centre of the device quick battery swap strong swap or snap in battery tray mostly for 3s-4s lipo, heavy load capacity low kv motor copper binding antigravity 300 kv high run time up to 4 hours, storage 2 tb 2.5 inch typically 5400 rpm data transfer rate 5 gbps formatted ntfs for windows usb bus powered warranty typically 2 to 3 years, input voltage 100 to 240 v output voltage 12v dc output current 5 to 30 amp built quality heavy duty vented metal smps protected with short circuit overloaded and auto reset fuses
Agency / Dept :
indian army
Due Date :
Jul 22, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16340861
Location : aligarh , uttar pradesh
Source : GEM Tenders
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26, procurement of spare parts of boiler, power contactor 16a at 415v ac coil 24v dc model3tf32 00 0bb4 power contactor biasing damper 24vdc siemens, siemens 3rh1921 1ba01 auxiliary contact block make siemens model 3rh19211ba01 type front top mounted auxiliary contact block contacts 1 no normally open electrical ratings pilot dutyac a600 600 v ac 10 a continuous dc q600 300 v, siemens 3rh19211ca01 auxiliary contact block make siemens model 3rh19211ca01type front top mounted auxiliary contact block contacts 1 nc electrical ratings pilot duty ac, siemens 3tf30 100a power contactor aa11 make siemens model 3tf30 100a type power contactor poles 3 main poles rated operational current ac3 9 a at 415 v ac auxiliary contacts 1 no integrated coil voltage 110 v ac 50 60 hz rated insulation voltage ui 690 v utilization category ac3 ac4 mounting din rail or screw mounting standards iec 6094741 is iec60947 4 kw at 400 v ac power contactor silo, 3ua52 002a thermal overload relay make siemens model 3ua52 002a type thermal overload relay current range 10 16 a trip class 10a reset mode manual automatic auxiliary contact 1 no 1 nc rated insulation voltage ui 690 v mounting direct mount to siemens 3tf30 31 contactors or separate base protection of motors against overload phase failure and unbalanced load standards iec 6094741 thermal overload relay swas, siemens 3th30 220a auxiliary contactor relay make siemens model 3th30 220a type auxiliary contactor relay contacts 4 2no 2nc rated operational current ie 10 a ac15 4 a at 230 v 2 a at 400 v rated insulation voltage ui 690 v coil voltage 110 v ac 50 60 hz standard compliance iec 6094751 mounting din rail or panel mounting, semiconductor fuse rating 10a size 000 make siemens, semiconductor fuse rating 2a size 000 make siemens, semiconductor fuse rating 4a size 000 make siemens, semiconductor fuse rating 6a size 000 make siemens, auxiliary contactor coil dc with 2no 2nc contacts model 3th30 22 0bb4 siemens, motor protection with overload relay function mpcb biasing damper 24vdc motor protection circuit breaker size s00 with overload relay model 3rv2111 1da10 overload release setting 22 32 a short circuit release 42 a size s00 function motor protection w overload relay connection type screw terminal screw terminal suitable motor 400v 11 kw biasing damper 24vdc, type 3 pole contactor model 3ts30 100a make siemens specifications type 3 pole contactor coil voltage 230v ac power rating at 415v 4 kw approx auxiliary contact 1 no rating ac1 25 a ac3 9 a utilization category standard ac3 duty motor application up to 4 kw 415v 3 phase3 power contactor higher rating mcb swas make siemens, type 3 pole power contactor make siemens series sirius model 3rt2015 2ab01 coil voltage 24v ac 5060 hz utilization category ac1 18 a ac3 7 a rated voltage up to 690 v motor rating ac3 1point 5 kw 230v 3 kw 400v 4 kw 690v auxiliary contact 1 no 1314 built in terminals main 1l1 3l2 5l3 2t1 4t2 6t3 coil a1 a2 mounting din rail panel standard iecen 60947 41 power contactor silo, motor starter protector mpcb silo motor protection circuit breaker size s00 model 3rv2011 1aa10 standard mpcb size s00 trip function thermal magnetic main application simple motor switching protection connection type screw terminal screw terminal number of poles 3 adjustment range current 1point 1 to 1point 6 a instantaneous release magnetic 21 a trip class 10 operational voltage 20 to 690 v ac insulation voltage 690 v ac surge voltage resistance 6 kv mains frequency 5060 hz mpcb silo, type 3 pole contactor model 3ts30 100a make siemens specifications type 3 pole contactor coil voltage 230v ac power rating at 415v 4 kw approx auxiliary contact 1 no rating ac1 25 a ac3 9 a utilization category standard ac3 duty motor application up to 4 kw 415v 3 phase3 power contactor higher rating swas make siemens, thermal overload relay model 3us50 001k8k current range 8 12point 5 a tolr swas construction of ordination type 2 25a type 3na make siemens, add on auxialiry contact block no 3tinto 4010 2a swas, add on auxialiry contact block nc 3tinto 4001 2a swas make siemens, mcbs siemens model 5sl4202 7rc type mcb poles 2p rating 2 amp c2 voltage 415v swas width modules 2 modules 36 mm 5000169057, mcbs siemens type mcb model 5sl4420 7rc type mcb rating 20 amp c20 voltage 415v poles 2p width modules 4 modules 72 mm swas, mcbs siemens model 5sl4202 7rc type mcb poles 2p rating 63 amp c63 voltage 415v width modules 3 modules 54 mm swas, siemens 3th30 220a auxiliary contactor relay make siemens model 3th30 220a type auxiliary contactor relay contacts 4 2no 2nc rated operational current ie 10 a ac15 4 a at 230 v 2 a at 400 v rated insulation voltage ui 690 v coil voltage 110 v ac 5060 hz standard compliance iec 60947 51 mounting din rail or panel mounting, power contactor model 3tf31 100a 230vac coil 1no ac1 20a ac3 12a make siemens current rating ac3 12 amp power rating at 415v 55 kw utilization category heavy duty ac3 duty poles 3pole, motor starter protector mpcb silo motor protection circuit breaker size s00 model 3rv2011 1ga10 standard mpcb size s00 trip function thermal magnetic tm release main application simple motor switching protection connection type screw terminal screw terminal number of poles 3 adjustment range current 45 63 a magnetic trip instantaneous release magnetic 82 a trip class 10 operational voltage 20 to 690 v ac insulation voltage 690 v ac surge voltage resistance 6 kv mains frequency 5060 hz, sipar ps2 har positioner make siemens model no 6dr5123 0nn01 0aa4 iw 420ma p 147bart ta 30 to 60 deg c ip66 nema 4x encl type4x
Agency / Dept :
uttar pradesh rajya vidyut utpadan nigam limited UPRVUNL
Due Date :
Jul 31, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Direct Current Resistance Standard. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Direct Current Resistance Standard sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Direct Current Resistance Standard Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Direct Current Resistance Standard, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Direct Current Resistance Standard Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Direct Current Resistance Standard Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Direct Current Resistance Standard.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Direct Current Resistance Standard depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Direct Current Resistance Standard Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Direct Current Resistance Standard bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Direct Current Resistance Standard. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Direct Current Resistance Standard, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Direct Current Resistance Standard, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Direct Current Resistance Standard?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Direct Current Resistance Standard tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Direct Current Resistance Standard?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Direct Current Resistance Standard, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Direct Current Resistance Standard is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All