sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

343Latest Cushion covers Tenders List

Latest Cushion covers Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Cushion covers tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Cushion covers tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Cushion covers Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Cushion covers tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Cushion covers Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Cushion covers Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Cushion covers Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Cushion covers tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Cushion covers Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Cushion covers sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Cushion covers tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Cushion covers tenders.

Is EMD mandatory for all Cushion covers tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Cushion covers work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Cushion covers tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Cushion covers Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16518893
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
NEW TENDER
tender for repair and overhauling service - rate contract for manufacturing of pvc covers bunk cushion covers upholstery renewal tailoring works onboard in vessels; any other suitable brand; no; buyer premises
Agency / Dept :
indian navy
Due Date :
Aug 21, 2026 (21 days left)
Tender Value :
0
View Documents
T18 Ref No : 16514617
Location : jammu , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for stepmill , cross trainer , exercise cycle , leg extension and curl machine , olympic flat bench press , adjustable bench , abdominal crunch machine , smith machine , functional trainer , dumbbell stand , t-bar row machine , back extension machine , hip abductor and adductor machine , 45-degree leg press machine , olympic barbell rack , rubberised dumbbells 10 kg , rubberised dumbbells 12.5 kg , rubberised dumbbells 15 kg , rubberised dumbbells 17.5 kg , rubberised dumbbells 22.5 kg , rubberised dumbbells 30 kg , rubberised dumbbells 35 kg , rubberised weight plate 5 kg , rubberised weight plate 7.5 kg , rubberised weight plate 10 kg , rubberised weight plate 15 kg , barbell rod curl 3 ft , barbell rod straight 3 ft , barbell rod straight 5 ft , barbell rod straight 7 ft , foam roller , medicine ball , triceps rope cable attachment , straight bar cable attachment , weight locking pin , v grip cable attachment, procurement of various gym equipment, (i) drive system- magnetic ems system for smooth and silent operation (ii) console- led dot matrix display providing clear visibility of workout metrics (iii) handle bar controls- integrated speed and start and stop buttons for convenient adjustments during exercise level, calories, time, distance, steps, etc. (iv) workout programs- multiple motivating programs catering to various fitness goals. (v) data readout- display speed level, calories burn, time, distance, and steps to monitor performance (vi) additional features- equipped with water bottle holder for hydration during workouts (vi) maximum user weight- 160kg, accommodating a wide range of users (vii) dimension- length- 145cm, width- 82 and height- 208 cm ensuring a compact footprint for commercial settings, (i) resistance levels- opt for machines offering at least 40 resistance levels to accommodate a wide range of workout intensities. (ii) stride length- a stride length of 19 inch to 22 inch ensures a natural and comfortable motion suitable for users of varying heights. (iii) flywheel weight- a heavier flywheel, such as 10kg to 14.2 kg, provides smoother and more stable movement (iv) power source- consider self-generating models to reduce electricity usage and allow placement flexibility (v) console features- look for a 15.6 inch tft touch screen with wi-fi connectivity, offering interactive programs and entertainment options (vi) connectivity options- ensure the machine includes bluetooth connectivity, speakers, and mobile phone holders for user convenience (vii) maximum user weight- a capacity of up to 180kg indicates a robust and durable construction suitable for commercial use (viii) dimensions- a footprint of approximately 217cm (l) x 71cm (w) x 163cm (h) ensures stability and accommodates various user sizes, (i) type- commercial grade upright or magnetic exercise cycle suitable for heavy-duty gym use. (ii) frame material- heavy duty steel frame with powder coated anti-rush finish. (iii) resistance system- magnetic resistance system with minimum 8 resistance levels and smooth operations. (iv) drive mechanism- belt driven system for noiseless and low maintenance performance. (v) flywheel- precision balanced flywheel pf minimum 8 kg for stable cycling motion. (vi) display console- led display showing time, speed, distance, calories and pulse. (vii) user capacity- minimum user weight capacity of 120 kg or above. (viii) seat and pedals- adjustable cushioned seat with anti-skid pedals and foot straps., (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) seat and backrest- adjustable backrest and seat angle to align the user knee with machine pivot for optimal biomechanics (iii) adjustment features- high density foam rollers and sweat resistant pu leather pads for comfort and long term use (iv) padding and upholstery- high-density foam padding with sweat-resistant, anti-tear pu leather covering for user comfort and longevity. (v) weight stack- comes with a reflectorized weight stack, steel weight with magnetic selector pin (100-120kg) (vi) range of motion- engineered cam system for consistent resistance and smooth leg extension as well as leg curl across full motion path., (i) frame construction- made from heavy duty 11-gauge steel (3 mm thick), rectangular or oval tubing (usually 50 x 100 mm) powder coated finish for rust, sweat and scratch resistance. (ii) bench platform- fixed flat bench with ipf - standard height (42-45 cm from floor). high-density foam padding covered in anti - microbial sweat - resistant pu leather. (iii) barbell holders- dual height bar catches for easy re-racking, made of steel with uhmw inserts to protect bar knurling. distance between uprights should be 110-120 cm, suitable for standard olympic bars. (iv) spotter platform- integrated rear platform or elevated standing area for spotters (on premium models). provided stability and safety during heavy lifts. (v) safety armsor spotter catches adjustable sporting arms or crash bars available in some models for added safety. protect lifter in case of failed rep. (vi) weight plate storage- 4-6 integrated olympic plate storage pegs (50 mm) with rubber stops for silent racking. pegs are evenly spaced for balance and easy access. (vii) dimensions- length- 160 - 180 cm , width - 120 - 140 cm, height - 120 - 140 cm (viii) stability features- wide base and rubber feet ensure no wobble during heavy pressing. (ix) max weight capacity- rated to withstand 500- 700 kg including user plus barbell weight. should be suitable for advanced lifters and competitive training., (i) construction and frame- built with 11-gauge steel (3 mm thick), using rectangularor oval tubing (usually 50x 100 mm), powder coated finish for rust, sweat and scratch resistance (ii) backrest adjustability- 7 to 9 positions from decline (-10 degree) to upright (85 degrees), laser cut or pin locking ladder system for secure angle transitions (iii) seat adjustability- 2-3 adjustable positions to prevent sliding during incline presses, quick pop pin or ladder lock mechanism (iv) padding- high density foam padding covered with sweat-resistant pu leather, dual stitched seams for durability and comfort (v) weight capacity- supports 400-500kg (including user and weight), ideal for heavy dumbbell work or barbell workout (vi) mobility- rear support wheels and front handle grip for easy movement, rubber feet ensure stability and protect floors (vii) footprint- length- - 120 - 130 cm, width- - 55 - 60 cm, height- - 45 cm (viii) backrest width- optimal width around 28-30 cm to allow full scapular movement during presses, (i) type- commercial grade abdominal crunch machine suitable for institutional and gym use. (ii) frame material- heavy-duty steel frame with powder coated anti-rust finish. (iii) weight stack- minimum 60-80 kg weight stack with safety selector pin arrangement. (iv) seat and padding- high-density foam seat and backrest with durable sweat resistant upholstery. (v) adjustment mechanism- adjustable seat and arm position for different user heights. (vi) cable and pulley system- heavy duty nylon coated cables with precision pulley system for smooth movement. (vii) grip handles- ergonomic anti-slip handles for comfortable and secure grip. (viii) user capacity- minimum user weight capacity of 120 kg or above., (i) frame and construction- built with 11-gauge heavy duty steel frame with 50 x 100 mm oval tubing, coated with electrostatic powder finish for rust, sweat, and corrosion resistance (ii) guide rod system- stainless steel linear guide rods (25-30mm dia.) with ultra-smooth linear bearings for frictionless barbell movement, allows vertical movement only, improving safety and targeting muscles precisely (iii) barbell specifications- integrated olympic bar (20kg) with knurled grip zones, rated to handle 300-350kg of weight, chrome plated finish for durability (iv) safety features- sprig loaded safety stoppers at multiple heights for secure reracking, twist rock mechanism to lockorunlock bar instantly with wrist rotation (v) weight plate storage- 4-6 olympic plate holders (50 mm dia.), rear mounted for convenience and space efficiency, rubber bumpers to reduce noise and protect plates. (vi) dimensions- length 210 cm, width 130 cm, height 230 cm, designed to fit most commercial gym spaces (vii) user capacity and usage- max user weight + load 400-450 kg, suitable for squats, presses, lunges shrugs, and rows with guided control and stability (ix) accessories and add-ons- comes with j- hooks, barbell locks and rubberized foot stabilizers for floor grip and equipment balance, (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) pulley system- dual pulleys with 180-degree swivel range, uses high tensile, nylon coated cables for smooth and quiet operation (iii) weight stacks- dual selectorized weight stacks 100-120 kg each steel weight with magnetic selector pin (100-120kg) allowing independent or simultaneous use (iv) adjustability- multiple vertical pulleys positions (15-20 height levels) to allow a wide range of motion and exercise variety (v) attachments and accessories- must have accessories like d-handles, straight bar, ankle strap and pull-up bar integrated into the frame with rubber grip, (i) dimensions (l x w x h)- 175 x 81 x 92 cm (ii) pipe size- 100 x 50 x 2.5 mm (iii) paint finish- electrostatic powder coating for durability and corrosion resistance (iv) design- three tier design to accommodate multiple pairs of dumbbells efficiently, (i) type- commercial grade plate loaded t-bar row machine without weight plates. (ii) frame material- heavy duty steel frame with powder coated anti-rust finish. (i) construction- robust and stable structure suitable for heavy-duty institutional gym use. (iv) handle design- multi-grip ergonomic handles with anti-slip coating for comfortable grip. (v) weight loading system- compatible with standard olympic plates. (vi) movement mechanism- smooth pivot movement with high strength bearing system. (vii) user capacity- minimum user weight capacity of 120 kg or above., (i) type- commercial grade back extension machine suitable for institutional gym use. (ii) frame material- heavy-duty steel frame with powder coated anti-rust finish. (iii) padding and upholstery- high-density foam padding with durable sweat resistant upholstery. (iv) adjustment mechanism- adjustable thigh pad and support positions for different user heights. (v) foot support- anti-skid foot platform with secure leg support arrangement. (vi) construction- stable and heavy duty design for continuous commercial usage. (vii) grip handles- ergonomic anti-slip handles for safe and comfortable exercise. (viii) user capacity- minimum user capacity of 120 kg and above., (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) dual functionality- single machine allows both hip abduction and adduction exercises via simple position adjustment (iii) adjustable start position- multiple start positions and range settings to accommodate user flexibility and control exercise intensity (iv) padding and comfort- high density foam thigh pads and seat with sweat resistant, tear proof upholstery for maximum comfort during inneror outer thigh movement (v) weight system- standard 100kg to 120 kg steel weight with magnetic selector pin, shielded stack for safety and noise reduction (vi) ergonomic design- seated posture with back support and aligned pivot points ensures proper biomechanics and muscle isolation, (i) frame construction- 11-gauge commercial-grade steel frame with 50 x 100 mm oval tubing, finished with electrostatic powder coating to prevent rust and surface damage (ii) press angle options- 45-degree incline sled style for natural movement and joint alignment (iii) weight capacity- plated loaded design with olympic sleeves, max load capacity- 400-450 kg built for powerlifters and athletes (iv) footplate design- extra-large non slip steel foot platform (approx. 70-85 cm wide) for multiple foot positions, may include angle adjustment for varied muscle targeting (v) seat and back support- ergonomically angled backrest with sweat-resistant, double stitched pu leather upholstery, seat adjustment track for optimal knee and hip alignment during pressing (vi) sled movement- multiple safety lockout positions to prevent overextension or injury, option for manual foot stop for quick disengage. movement (vii) dimensions (approx.)- length- 200-220 cm, width- 130-150 cm, height- 140-160 cm, designed to accommodate users from 5 feet to 6 feet and 6 inches. (viii) additional features- integrated weight plate storage horns, rubber foot stabilizers to protect gym flooring, maintenance free bushings and sealed bearings for longevity, (i) frame and material- built with 11-gauge steel (3 mm thick), using rectangularor oval tubing (usually 50x 100 mm), heavy duty welded frame for maximum rigidity, powder coated finish for rust, sweat and scratch resistance (ii) design type- vertical barbell rack, can hold 8-10 olympic barbells depending on model (iii) bar holders- 50mm dia. sleeves with rubberized inserts to protect bar knurling and reduce noise (iv) weight capacity- each holder supports bars weighing up tp 20-25 kg safely, overall rack capacity often exceeds 200kg (v) dimensions- length and height vary by model but typically compact to fit gym spaces efficiently, base equipped with rubber feet for floor protection and stability, (i) core material- solid cast iron core for durability and consistent weight (ii) rubber coating- thick high quality non-marking rubber coating that protects floors, reduces noise, and resists cracking (iii) handle design- ergonomic chrome or stainless steel handle with knurled grip for secure, comfortable hold, handles designed to prevent hand slippage during sweat (iv) weight range- weights and quantity to be provided as asked by the buyer (v) shape and stability- hexagonal heads to prevent rolling, balanced design to ensure even weight distribution (vi) markings- weight values clearly printed on each head for easy identification, (i) core material- made from high density cast iron or steel core for durability and accuracy (ii) rubber coating- thick high quality non-marking rubber coating that protects floors, reduces noise, and resists cracking (iii) hole diameter- standard 50mm (olympic) centre hole to fit olympic bars (iv) weight accuracy- precision weight tolerance within +- 1 to 2 % to ensure training consistency (v) shape and texture- round, flat plates with textured or smooth surface for easy handling and stacking (vi) markings- weight clearly embossed in kg on each plate, (i) material and construction- made from tensile alloy steel with a tensile strength of 150000 psi or more for durability and flexibility (ii) dimensions- diameter of standard olympic bar, length and shape should be as required by user (iii) sleeve and rotation- needle or ball bearing sleeves for smooth rotation, reducing breast and elbow strain (iv) knurling- aggressive but comfortable knurling pattern for grip, centre knurling present on men bar for better stability during squats (v) weight capacity- rated to hold up to 680kg (vi) finishing- finished with black oxide chrome or stainless steel for corrosion resistance and aesthetics, (i) material- made from high density eva foam or expanded poly polypropylene for durability and firmness (ii) size and dimension- typical length 30-45 cm, diameter 12-15 cm (iii) texture- smooth or riggedor texture surface to target muscle notes to improve blood flow (iv) durability- retains shape after repeated use, resistant to cracking and deformation (v) weight and portability- lightweight and easy to carry, fits in gym bags, (i) material- made from durable rubber, leather or synthetic leather with textured surface for grip (ii) size and diameter- diameter range from 20 - 35 cm depending on weight (iii) construction- filled with gel for even weight distribution and controlled bounce (iv) durability- designed to withstand repeated impact and throwing, (i) material- heavy duty braided for durability and resistance to fraying (ii) length- standard length of 36-40 cm for full extension and range of motion (iii) end stoppers- thick rubber or polymer ends to ensure secure grip and prevent slipping (iv) attachment loop- chrome plated steel connector loop for easy clipping onto cable machines (v) grip comfort- ergonomic design allows for comfortable, slip resistance grip during intense sets, (i) material- solid steel construction with chrome or black oxide finish for corrosion resistance (ii) length- 18 - 24 inches for controlled grip width (iii) grip surface- knurled and rubber coated grip for secure non-slip handling (iv) rotation- swivel attachment for smooth movement during curls and pushdowns, (i) material- made from hardened steel with corrosion resistant coating (ii) design- spring loaded or clip style pin for quick and secure locking (iii) size- fits standard olympic bars and machines with 25-50 mm diameter holes (iv) strength- engineered to withstand heavy loads without banding or slipping (v) grip- ergonomic handle or ring for easy insertion and removal (vi) usage- used to secure plates on bars or adjust machine settings safely, (i) material- solid steel construction with chrome or powder coated finish for corrosion resistance (ii) design- angled v shape encourage natural hand positioning and reduce joint strain (iii) grip surface- knurled and rubber coated grip for secure non-slip handling (iv) width- standard grip of 20-25 cm for close grip exercise (v) rotation- central rotating eyelet for fluid cable movement during pull and row exercises.
Agency / Dept :
indian air force IAF
Due Date :
Aug 20, 2026 (20 days left)
Tender Value :
0
View Documents
T18 Ref No : 16516069
Location : lucknow , uttar pradesh
Source : GEM Tenders
NEW TENDER
corrigendum tender for writing pad chair seating chair with foldable writing pad in metal frame , training chair cushioned seat with durable frame without wheel movement , training table - pre- laminated sheets or sunmica sheets board with wooden covered leg , revolving chair - high back, hydraulic height adjustment with armrest and wheel movement , officer table - premium finish with storage facility , officer chair - cushioned seat with armrest and wheel movement , computer chair - adjustable height with cushioned seating
Agency / Dept :
institute of secretariat training and management ISTM
Due Date :
Aug 01, 2026 (1 day left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16516145
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
NEW TENDER
corrigendum tender for chair easy , chair easy with cushion , bath stool pvc , almirah small steel with shelves , almirah large steel with shelves , chair verenda , dressing mirror gents , bed hard , chair dining officers , chair verandah, replacement of ber furniture for the qe sep 2024 and qe mar 2025 under ge haddo sri vijaya puram, overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs be true godrej pattern with plastic cane 2mm to 2 point 5mm wide comma white colour comma quality as approved by ge. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., all wood shall be seasoned first class teak wood free from knots and defects comma hard nylon buffers shall be fixed at the bottom of legs with brass screws seat and back shall be made by 12mm thick bwr grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth not less rs 500 oblique mtr as approved by ge. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by engineer in charge., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall size of the chair shall be 455mm wide 455mm deep and 940mm high. the frame of the chair shall be of 19mm dia ms tube of wall thickness 1 point 6mm duly powder coated. the seat and back of the chair shall be of pvc 4mm of weight not less than 1 point 85 kgs and grooves 90x10mm ten in nos on seat and back. one stiffener 19mm dia ms tube shall be provided in between the front legs as shown in drg. an additional support in seat and back shall be provided at centre between the seat and back duly welded for rest of pvc seat irrespective of what is shown on drg. rubber shoes of best quality shall be provided to each end of legs. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm hig comma 600mm wide and 100mm high. all wood shall be seasoned first class teak wood free from knots and defects. back shall be made by 12mm thick bwr grade plywood. 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edge of shutters and drawers. looking mirror shall be 5mm thick fixed inside the teak wood frame made out of 38mmx25mm section. 03 x glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe.18mm ms square pipe shall be provided in the inner of head oblique foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head oblique foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., all wood shall be seasoned first class teak wood free from knots and defects.hard nylon buffers shall be fixed at the bottom of legs with brass screws seat made of 12mmm thick bwr grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth not less than rs 500 oblique mtr as approved by ge. 50 x 50 x 20 mm and 3mm thick ss right angle bracket between leg and rails fixed with steel screws 8 nos in one chair. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the overall size of the chair shall be 455mm wide 455mm deep and 940mm high. the frame of the chair shall be of 19mm dia ms tube of wall thickness 1 point 6mm. the seat and back of the chair shall be of pvc 4mm of weight not less than 1 point 85 kgs and grooves 90x10mm ten in nos on seat and back. one stiffener 19mm dia ms tube shall be provided in between the front legs as shown in drg. an additional support in seat and back shall be provided at centre between the seat and back duly welded for rest of pvc seat irrespective of what is shown on drg. rubber shoes of best quality shall be provided to each end of legs. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in shite colour rest all as specified oblique shown in drawing and directed by enginer in charge.
Agency / Dept :
indian army
Due Date :
Aug 01, 2026 (1 day left)
Tender Value :
6028158
View Documents
T18 Ref No : 16517094
Location : lucknow , uttar pradesh
Source : GEM Tenders
NEW TENDER
corrigendum tender for binder clips (v3) conforming to is 8231 (q4) , electronic calculator (v2) (q4) , file/folder (v3) (q4) , printed letter head paper (v3) (q4) , correspondence envelopes (v3) (q4) , correspondence envelopes (v3) conforming to is 13892 (q4) , eraser (v2) (q4) , correction fluid pen(v3) (q4) , paper pins (v2) conforming to is 5653 (q4) , photography paper conforming to is 6139 (q4) , glue stick (v3) (q4) , markers and highlighters (q4) , paper clips (v2) conforming to is 5650 (q4) , writing pens (q4) , black lead pencils (v3) conforming to is 1375 (q4) , stationery holder/pen stand(v3) (q4) , pin cushions (q4) , poker or awl as per is 10375 (q4) , register (v2) (q4) , rubber bands (q4) , metric scale (v2) conforming to is 1480 (q4) , metric steel scales (v3) conforming to is 1481 (q4) , stationery scissors (v2) conforming to is 989 (q4) , desk pads - writing (v2) (q4) , sketch pens (v3) (q4) , binding covers (v2) (q4) , pads for rubber stamps (v2) conforming to is 4747 (q4) , stamp- pad ink (v2) conforming to is 393 (q4) , staplers(v3) (q4) , staple pins/staples(v3) (q4) , self adhesive flags (v3) (q4) , sticky notes (v2) (q4) , tags for files (v3) conforming to is 8499 (q4) , pressure sensitive adhesive tapes with plastic base (v4) conforming to is 13262 (q4)
Agency / Dept :
indian army
Due Date :
Aug 03, 2026 (3 days left)
Tender Value :
0
View Documents
T18 Ref No : 16514104
Location : jodhpur , rajasthan
Source : GEM Tenders
NEW TENDER
tender for plain copier paper (v3) isi marked to is 14490 (q4) , paper pins (v2) conforming to is 5653 (q4) , markers and highlighters (q4) , manual pencil sharpener (v3) (q4) , stamp-pad ink (v2) conforming to is 393 (q4) , sticky notes (v2) (q4) , colour pencil (v2) (q4) , lamination films (v2) (q4) , correction tape (v2) (q4) , writing pens (q4) , black lead pencils (v3) conforming to is 1375 (q4) , glue stick (v3) (q4) , paper weights (v2) (q4) , tags for files (v3) conforming to is 8499 (q4) , correction fluid pen(v3) (q4) , hdpe bucket (v2) conforming to is 3730 (q4) , binder clips (v3) conforming to is 8231 (q4) , photography paper conforming to is 6139 (q4) , pin cushions (q4) , binding covers (v2) (q4) , waste container (v3) (q4) , serving tray or platter (v2) (q4) , water jugs (q4) , glass tableware (v2) conforming to is 1961 (q4) , air freshener solid or gel (v2) (q4) , sweeping broom (v5) (q4) , domestic wiper/wiper mopper (v3) (q4) , toilet brush (v3) (q4)
Agency / Dept :
indian army
Due Date :
Aug 10, 2026 (10 days left)
Tender Value :
364539.84
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16073433
Location : lucknow , uttar pradesh
LIVE TENDER
tender for supply of seat cushion cover (c&w item), supply of seat cushion cover as per specification no- rdso/2008/cg-07, conformi ng to en-45545 hl-3 for tejas executive class coaches as per colour scheme of tejas executi ve class seat , as per colour scheme of tejas executive class coach required both colour e qual qty( yellow & orange) note- firm will give the trainning to trimming staff of coaching depot, aishbagh/ljn, n.e.railway for change the seat cover of min. 5 seat (sample to be appro ved by consignee against colour, shade and pattern before bulk supply) - warranty period: 3 0 months after the date of delivery pl code : 330230810011
Agency / Dept :
north eastern railway NER
Due Date :
Jul 31, 2026 (Expire Today)
Tender Value :
0
View Documents
T18 Ref No : 16222923
Location : talaja , gujarat
Source : GEM Tenders
LIVE TENDER
tender for electrification work of lighthouse tower at gopnath lighthouse and dgps station staircase wiring , 2 module , 4 module , 6 module , 12 module , 5 or 6 a switch , 15 or 16 a switch , 3 pin 5 or 6 a socket outlet , 6 pin 15 or 16 a socket outlet , brass holder , blanking plate , installation of bulkhead , installation of tubelight , pvc conduit 20 mm , copper wire 3 x 1.5 sq mm , copper wire 3 x 2.5 sq mm , copper wire 3 x 4 sq mm , 3c and 6 sq mm copper xlpe armoured cable , 3c and 6 sq mm copper xlpe unarmoured cable , cable laying work , 6 way double door mcb board , 4 way 4 and 12 double door mcb board , single pole 20 a mcb , double pole 32 a 04 nos , double pole 40 a mcb , double pole 63 a mcb , led tube light , bulkhead , upvc cable tray , wall fan , labour charges , led circular or squre light , plate earthing work , earthing copper strip 25 x 3 mm , 16 sq mm 1 core copper cable , earth station, electrification work of lighthouse tower at gopnath lighthouse and dgps station, wiring for twin control light point with 1.5 sq. mm frls or hffr pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit 2 way modular switch modular plate suitable gi or pvc box and earthing the point with 1.5 sq.mm frls or hffr pvc insulated copper conductor single core cable etc as required, supplying and fixing following 2 module gi box or surface plastic box alongwith modular base and cover plate for modular switches in recess etc as required, supplying and fixing following 4 module gi box or surface plastic box alongwith modular base and cover plate for modular switches in recess etc as required, supplying and fixing following 6 module gi box or surface plastic box alongwith modular base and cover plate for modular switches in recess etc as required, supplying and fixing following 12 module gi box or surface plastic box alongwith modular base and cover plate for modular switches in recess etc as required, supplying and fixing following modular switch or socket on the existing modular plate and switch box including connections but excluding modular plate etc as required, supplying and fixing brass batten or angle holder including connection etc as required, supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required, installation testing commissioning of wall bracket or ceiling fitting of all sizes and shapes containing upto two gls or cfl or led lamp per fitting complete with all accessories including connections etc as required for bulkhead fitting must by carried out on wooden patia, installation testing commissioning of pre-wired fluorescent fitting or compact fluorescent fitting of all types complete with all accessories and tube or lamp etc.directly on ceiling or wall including connections with 1.5 sq.mm frls or hffr pvc insulated copper conductor single core cable and earthing etcas required., supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface or recess including cutting the wall and making good the same in case of recessed conduit as required., supplying and drawing 3 x 1.5 sqmm means phase nuetral and earth wire of frls or hffr pvc insulated copper conductor single core cable in the existing surface or recessed steel or pvc conduit as required, supplying and drawing of 3 x 2.5 sq mm means phase nuetral and earth wire of frls or hffr pvc insulated copper conductor single core cable in the existing surface or recessed steel or pvc conduit as required, supplying and drawing of 3 x 4 sqmm means phase nuetral and earth wire of frls or hffr pvc insulated copper conductor single core cable in the existing surface or recessed steel or pvc conduit as required, supply of power cable 3c and 6 sqmm 1.1 kv grade frls multistranded copper conductor xlpe armoured cable finolex polycab or havells make from aton panel to tower base for main light nais and tower light, supply of power cable 3c and 6 sqmm 1.1 kv grade frls multistranded copper conductor xlpe unarmoured cable. finolex polycab or havells make from tower base mcb board to tower service room for main light nais and tower light, laying of one number pvc insulated and pvc sheathed or xlpe power cable of 1.1 kv grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc. as required., supplying and fixing following way single pole and neutral sheet steel mcb distribution board 240 v on surface or recess complete with tinned copper bus bar neutral bus bar earth bar din bar interconnections powder painted including earthing etc.as required but without mcb or rccb or isolator, supplying and fixing mcb distribution board 415 v on surface or recess complete including earthing etc., supplying and fixing 5 a to 32 a rating 240 or 415 v 10 ka c curve mcb suitable for inductive load of following poles in the existing mcb db complete, supplying and fixing 5 a to 32 a rating 240 or 415 v 10 ka c curve miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections,testing and commissioning etc.as required, supplying and fixing 40 a rating double pole 240 or 415 v 10 ka c curve miniature circuit breaker suitable for inductive load in the existing mcb db complete with connections,testing and commissioning etc.as required, supplying and fixing 63 a rating double pole 240 or 415 v 10 ka c curve,miniature circuit breaker suitable for inductive load in the existing mcb db complete with connections testing and commissioning etc.as required, supply of led tube light fitting 22 w and 230 v 4 ft in white colour 2200 lumen etc.any reputed brand., supply of aluminum bulkhead light ip 65 protection with 10 watt 230 v crompton or philips or bajaj, supply of 2 mtr length cable trunking upvc tray 100 x 50 mm,any reputed brand, supply of copper winding 230 v 1 ph wall mounted fan sweep size 400 mm 3 nos blades any reputed brand, labour charges for dismantaling & removing old pvc cable tray screw and cables from tower base to top of service room and fitting new cable trunking pvc tray 100 mm x 50 mm by using s.s. and brass screw and washer. the distance between two srew must be 1 feet and after fitting cable tray laying of old and new cable in cable trunking by using heavy duty cable tie as per instructed complete etc with tool and plant., supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb with housing as a heat sink conforming ip 65 protection 20 to 40 watts surge 4 kv ip 65 and above rating size 300 mm to 450 mm, earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement andwatering pipe of 2.7 meter long etc. with charcoal coke and salt as required, supply of 25x3 mm copper strip for service room equipment earthing, supply of 16 sqmm 1 core pvc insulated copper flexible frls cable green colour, supplying and fixing of 6 way and 4 way earth station at tower base and service room for earthing connection to all equipment
Agency / Dept :
department of lighthouses and lightships DGLL
Due Date :
Jul 31, 2026 (Expire Today)
Tender Value :
608278
View Documents
T18 Ref No : 16324252
Location : leh , ladakh
Source : GEM Tenders
LIVE TENDER
tender for 5 seater wooden sofa set with centre table , large steel almirah 6 ft 4 ft , visitor chair , hydraulic barber chair , steel storage rack 5 shelves , chair cushion, furniture items, one three seater sofa two single seater sofas one centre table glass top 2 frame material solid seasoned sheesham woodanti termite and anti borer treated 3 seat constructionseat base 18 mm bwr grade plywoodsupport heavy duty zig zag spring with high tensile nylon webbingseat foam high density pu foam back foam high density pu foam 32 2 kg m removable seat cushions with zipper 4 upholsterypremium polyester fabric minimum 250 gsm colour brown grey beige 5 wood finishpremium pu melamine finishscratch stain and moisture resistant 6 centre table material solid sheesham woodtop 8 mm toughened glass with polished edgessize approximately 1100 600 450 mm 7 approximate dimensionsthree seater 1800 750 850 mmsingle seater 750 750 850 mm 8 load capacitythree seater minimum 300 kgsingle seater minimum 120 kg each minimum 3 year, dimensions 6 ft height 4 ft width 20 22 inches depth material crca steel sheet body thickness minimum 0 8 mm door thickness minimum 0 8 mm shelf thickness minimum 0.8 mm number of doors 2 number of shelves 5 adjustable steel shelves storage compartments load capacity minimum 50 kg per shelf locking system 3 way central locking lock 6 lever lock with 2 keys handle recessed metal handle finish rust proof 7 tank process with epoxy powder coating colour grey light grey warranty minimum 1 year installation delivery and placement at consignee location included., chair type fixed visitor chair non revolving frame material heavy duty ms steel tube frame finish chrome plated epoxy powder coated seat material cushioned seat with high density pu foam backrest cushioned ergonomic backrest upholstery fabric leatherette armrests fixed pp pu armrests seat size minimum 450 mm 450 mm backrest height minimum 450 mm seat height 430 460 mm from floor weight bearing capacity minimum 100120 kg legs anti slip pvc nylon bushes colourn nas per byer required warranty minimum 1 year, type professional salon barber chair frame material heavy duty mild steel with chrome finish base heavy circular chrome base minimum 22 24 inches diameter height adjustment hydraulic pump with smooth up down operation seat high density moulded foam cushion backrest reclining backrest with locking mechanism headrest adjustable and removable footrest heavy duty chrome footrest armrests cushioned fixed armrests upholstery premium pu leather black water and stain resistant rotation 360 swivel with locking facility weight capacity minimum 150 kg overall finish rust resistant chrome powder coated components colour black or as approved by the purchaser warranty minimum 1 year, open storage rack 5 shelves crca mild steel 1800 mm approx 900 mm appro 450 mm approx 0 81 0 mm minimum minimum 80100 kg per shelf udl adjustable shelves epoxy powder coated grey knock down boltless nut bolt type heavy duty steel legs with base caps rust resistant powder coating minimum 1 year, seat cushion for office visitor chair high density pu foam memory foam polyester fabric mesh removable washable preferred 5075 mm approx 400 x 400 mm 16 x 16 in minimum 40 kg m3 non-slip base elastic strap buckle black grey minimum 1 year supply of complete chair cushion with cover
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Aug 10, 2026 (10 days left)
Tender Value :
499000
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16446710
Location : ludhiana , punjab
Source : GEM Tenders
LIVE TENDER
tender for floor drain traps (v2) (q3) , bathroom or toilet mirror (v3) (q4) , kitchen rack stainless steel size 30 inch x 36 inch x 10 inch , c.p towel rack 24 inch with hooks , pvc connection pipe 15mm x 450mm long , pvc connection pipe 15mm x 600mm long , waste pipe pvc 32 mm dia x 800mm long , waste pipe pvc 40 mm dia x 800mm long , waste coupling ptmt 32 mm , wash basin size 550x450mm , pvc water tank triple layer cylindrical type of 1000ltrs capacity , pvc water tank triple layer cylindrical type of 500ltrs capacity , door closer hydraulic regulated designation no. 1 universal type comma shutters up to 700mm in width and of weight not more than 35 kgs and fixed , wire mesh 304 woven ss comma 0.4 mm hole comma 1 mm thickness comma 15.24 l x 0.91 h mtr comma 15mtr x 3 feet silver coloured , ss curtain rod cp 19 oblique 20 mm dia , looking mirror dressing table ladies mirror only 48 x 15 inch x 5mm thick , looking mirror dressing table gents mirror only 30 x 15 inch x 5mm thick , spindle for stop cock brass 15mm internal threaded , waste coupling with washer cp brass 40 mm , jet spray with connection pipe , corner glass shelf size 12 inch with cp railing , pvc shelf size 450x124mm , looking mirror with alumn frame 600x450 mm x 6mm , float valve brass 15mm with rod and pvc ball , float valve pvc 15 mm complete alumn rod and pvc ball , float valve pvc 25mm complete alumn rod and pvc ball , pvc internal fitting kit for cistern 10 ltr capacity , speed breaker yellow and black 500 x 350 to 375 x 50mm , road delinator size 750 to 770x65mm , solar metal stud , pvc cover for water storage tank 500 ltr , prelaminated particle board 8 feet x 4 feet x 18mm eg , plywood bwp size 8 feet x 4 feet x 12mm , plywood bwp size 8 feet x 4 feet x 6mm , wooden beading 25 mm x 4 mm x 6 ft long , teak wood 6 ft long of size 10 inch x 2.5 inch , cushion with cover for sofa set 100mm thick 40 density. cushion size 21x22x4 inch rate of tapestry cloth shall not be less than 250 per mtr , spindle for sluice valve 150mm , bitumen road patch pack of 25kg , bricks comma common brunt clay building bricks comma sub class b designation 75 , graded coarse aggregate 20mm , cement opc 43 grade 50 kgs bag , coarse sand , graded coarse aggregate 12.5mm , bracket ss suitable for 20mm curtaind rod , paint white rfu 1 ltr pack , paint black rfu 1 ltr pack , paint olive green rfu 1 ltr pack , french polish , touch wood isi marked pack of 1 ltr , thinner , clear synthetic varnish , oil putty soft for window glass , fevicol sh isi marked pack of 1 kg , m seal 1 kg pack , paint brush 4 inch best quality , paint brush 3 inch best quality , paint brush 2 inch best quality , cement white 1 kg pack , helical door spring closer ms 300 mm including roller and roller plate , gi pipe medium grade 20 mm bore , union gi 15 mm , socket gi 15 mm , jumper valve for bib tap brass 15mm 100 nos each pkt , wood screw steel 20 mm 100 nos each pkt , screw full thread black star head 50mm 100 nos each pkt , screw full thread black star head 40mm 100 nos each pkt , screw full thread black star head 35mm 100 nos each pkt , screw full thread black star head 25mm 100 nos each pkt , nails 2 inch , nails 1.5 inch , nails 1 inch, demand of store, kitchen rack stainless steel size 30 inch x 36 inch x 10 inch, c.p towel rack 24 inch with hooks, pvc connection pipe 15mm x 450mm long, pvc connection pipe 15mm x 600mm long, waste pipe pvc 32 mm dia x 800mm long, waste pipe pvc 40 mm dia x 800mm long, waste coupling ptmt 32 mm, wash basin size 550x450mm, pvc water tank triple layer cylindrical type of 1000ltrs capacity, pvc water tank triple layer cylindrical type of 500ltrs capacity, door closer hydraulic regulated designation no. 1 universal type comma shutters up to 700mm in width and of weight not more than 35 kgs and fixed, wire mesh 304 woven ss comma 0.4 mm hole comma 1 mm thickness comma 15.24 l x 0.91 h mtr comma 15mtr x 3 feet silver coloured, ss curtain rod cp 19 oblique 20 mm dia, looking mirror dressing table ladies mirror only 48 x 15 inch x 5mm thick, looking mirror dressing table gents mirror only 30 x 15 inch x 5mm thick, spindle for stop cock brass 15mm internal threaded, waste coupling with washer cp brass 40 mm, jet spray with connection pipe, corner glass shelf size 12 inch with cp railing, pvc shelf size 450x124mm, looking mirror with alumn frame 600x450 mm x 6mm, float valve brass 15mm with rod and pvc ball, float valve pvc 15 mm complete alumn rod and pvc ball, float valve pvc 25mm complete alumn rod and pvc ball, pvc internal fitting kit for cistern 10 ltr capacity, speed breaker yellow and black 500 x 350 to 375 x 50mm, road delinator size 750 to 770x65mm, solar metal stud, pvc cover for water storage tank 500 ltr, prelaminated particle board 8 feet x 4 feet x 18mm eg, plywood bwp size 8 feet x 4 feet x 12mm, plywood bwp size 8 feet x 4 feet x 6mm, wooden beading 25 mm x 4 mm x 6 ft long, teak wood 6 ft long of size 10 inch x 2.5 inch, cushion with cover for sofa set 100mm thick 40 density. cushion size 21x22x4 inch rate of tapestry cloth shall not be less than 250 per mtr, spindle for sluice valve 150mm, bitumen road patch pack of 25kg, bricks comma common brunt clay building bricks comma sub class b designation 75, graded coarse aggregate 20mm, cement opc 43 grade 50 kgs bag, coarse sand, graded coarse aggregate 12.5mm, bracket ss suitable for 20mm curtaind rod, paint white rfu 1 ltr pack, paint black rfu 1 ltr pack, paint olive green rfu 1 ltr pack, french polish, touch wood isi marked pack of 1 ltr, thinner, clear synthetic varnish, oil putty soft for window glass, fevicol sh isi marked pack of 1 kg, m seal 1 kg pack, paint brush 4 inch best quality, paint brush 3 inch best quality, paint brush 2 inch best quality, cement white 1 kg pack, helical door spring closer ms 300 mm including roller and roller plate, gi pipe medium grade 20 mm bore, union gi 15 mm, socket gi 15 mm, jumper valve for bib tap brass 15mm 100 nos each pkt, wood screw steel 20 mm 100 nos each pkt, screw full thread black star head 50mm 100 nos each pkt, screw full thread black star head 40mm 100 nos each pkt, screw full thread black star head 35mm 100 nos each pkt, screw full thread black star head 25mm 100 nos each pkt, nails 2 inch, nails 1.5 inch, nails 1 inch
Agency / Dept :
indian army
Due Date :
Aug 06, 2026 (6 days left)
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Cushion Covers. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Cushion Covers sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Cushion Covers Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Cushion Covers, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Cushion Covers Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Cushion Covers Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Cushion Covers.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Cushion Covers depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Cushion Covers Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Cushion Covers bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Cushion Covers. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Cushion Covers, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Cushion Covers, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Cushion Covers?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Cushion Covers tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Cushion Covers?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Cushion Covers, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Cushion Covers is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All