Register Now Free Trail
Sales : +917069661818
Sales : +917069661818
Register Now Free Trail
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source
Tender Type

28Latest Class room chair Tenders List

Latest Class room chair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Class room chair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Class room chair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Class room chair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Class room chair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Class room chair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Class room chair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Class room chair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Class room chair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Class room chair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Class room chair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Class room chair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Class room chair tenders.

Is EMD mandatory for all Class room chair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Class room chair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Class room chair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Class room chair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16381179
Location : srinagar , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for shamiyana jaipuri combat size 45 x 45 ft with sidewall , exhaust fan , led light 15 or 30 watt , chair cover , cushion for training class room chair , room mat , walnut board size 5 x 3 feet , paint remover 1 kg packet , duha funnel , gi pipe 1 inch with elbow socket union and socket same size , steel pipe , photo frame small size , three burner gas stove , double bedsheet, atg boq1, shamiyana jaipuri combat size 45 x 45 ft with sidewall, exhaust fan, led light 15 or 30 watt, chair cover, cushion for training class room chair, room mat, walnut board size 5 x 3 feet, paint remover 1 kg packet, duha funnel, gi pipe 1 inch with elbow socket union and socket same size, steel pipe, photo frame small size, three burner gas stove, double bedsheet
Agency / Dept :
indian army
Due Date :
Aug 01, 2026 (6 days left)
Tender Value :
0
View Documents
T18 Ref No : 16343774
Location : debipur , jharkhand
Source : GEM Tenders
LIVE TENDER
tender for blanket red , towel , gauze pad 4x4 , gauze pad 3x3 , roller bandage , cotton roll , adhesive tape 1 inch , adhesive tape 2 inch , twill tape , 4x4 inch sponge , 3x3 inch sponge , iv catheters or venflons 14 16 18 20 22 24 gauge , central line iv catheter with guidewire , flexible guidewire , 14- to 20 gauge cutdown catheters 2 , syringes 2 ml , syringes 5 ml , syringes 10 ml , syringes 20 ml , syringes luer lock 5 10 20 and 50 ml , 18 g bevelled needle , 12 to 14 gauge over the needle catheters 8 point 5 cm long , assorted intravenous over the needle catheters , 16 or 18 gauge bone aspiration or transfusion needle , 22-to 24-gauge over-the-needle catheters , butterfly needle 19 or 20 g , french rapid infuser catheter kit with guidewire , iv set with macro dip , large-caliber extension tubing , oxygen mask , non rebreathing mask with o2 reservoir , oral airway , nasal airway , no 5 tracheostomy tube cuffed , endotracheal tubes cuffed adult nasal 6mm id , endotracheal tubes cuffed adult oral 6 to 8 mm id , endotracheal tubes uncuffed paediatric 3mm id , endotracheal tubes uncuffed paediatric 4mm id , et tube paediatric adapter size 3 , 36 french chest tube and drainage collection device , soft suction catheter , rigid suction catheter , nasogastric tube 16 18 , peritoneal lavage kit , indwelling urinary catheter and collection bag , ppe kits , surgical garb scrub suit gowns , disposable gloves , shoe cover , respirator with et tube adapter , antiseptic swabs , suture 4-0 suture with swaged needle , 2-0 and 3-0 silk with cutting needle , 2-0 and 3-0 silk with taper needle 1 , 4-0 monofilament non cutting needle optional , 10 12 no scalpel blades , surgical drapes , bed sheets , pillow , towels , underwater seal device-disposable , flutter-type valve 1 , one way valve , three way stopcock with attached tubing , pneumatic inflatable splints , vacuum bean bag splints , leg traction splint , slings , dye methylene blue , ecg electrodes , pacing defibrillator pads , ecg roll , pelvic binder sheet , tongue blades ss , tourniquet , make up mouline kit , gum elastic bougie , lma different sizes 2 to 5 , combi tube , pericardiocentesis kit , ilma , miscellaneous consumables contingency etc , portale ultrasound machine with at least a convex probe and linear probe upgradable to echo probe , laptops with led screen dvd drive , desktop with led screen dvd drive , microphone lavaliere collar mike and sound system , smart tv minimum 65 inch for seminar room , laryngoscope with adult blades , finger pulse oximeter , scoop stretcher , table 6-8 foot , mayo stand-emergency table , portable iv stand , table for faculty class room , chairs for faculty class room , stool to stand on for cpr , trollies for mannequin , crash cart , clocks , podium , pointer , x ray view boxes , dust bins , mats , conference table , conference chairs , storage racks steel, consumables for nels, as per attached specification
Agency / Dept :
all india institute of medical sciences AIIMS
Due Date :
Aug 11, 2026 (16 days left)
Tender Value :
0
View Documents
T18 Ref No : 16343778
Location : debipur , jharkhand
Source : GEM Tenders
LIVE TENDER
tender for blanket red , towel , gauze pad 4x4 , gauze pad 3x3 , roller bandage , cotton roll , adhesive tape 1 inch , adhesive tape 2 inch , twill tape , 4x4 inch sponge , 3x3 inch sponge , iv catheters or venflons 14 16 18 20 22 24 gauge , central line iv catheter with guidewire , flexible guidewire , 14- to 20 gauge cutdown catheters 2 , syringes 2 ml , syringes 5 ml , syringes 10 ml , syringes 20 ml , syringes luer lock 5 10 20 and 50 ml , 18 g bevelled needle , 12 to 14 gauge over the needle catheters 8 point 5 cm long , assorted intravenous over the needle catheters , 16 or 18 gauge bone aspiration or transfusion needle , 22-to 24-gauge over-the-needle catheters , butterfly needle 19 or 20 g , french rapid infuser catheter kit with guidewire , iv set with macro dip , large-caliber extension tubing , oxygen mask , non rebreathing mask with o2 reservoir , oral airway , nasal airway , no 5 tracheostomy tube cuffed , endotracheal tubes cuffed adult nasal 6mm id , endotracheal tubes cuffed adult oral 6 to 8 mm id , endotracheal tubes uncuffed paediatric 3mm id , endotracheal tubes uncuffed paediatric 4mm id , et tube paediatric adapter size 3 , 36 french chest tube and drainage collection device , soft suction catheter , rigid suction catheter , nasogastric tube 16 18 , peritoneal lavage kit , indwelling urinary catheter and collection bag , ppe kits , surgical garb scrub suit gowns , disposable gloves , shoe cover , respirator with et tube adapter , antiseptic swabs , suture 4-0 suture with swaged needle , 2-0 and 3-0 silk with cutting needle , 2-0 and 3-0 silk with taper needle 1 , 4-0 monofilament non cutting needle optional , 10 12 no scalpel blades , surgical drapes , bed sheets , pillow , towels , underwater seal device-disposable , flutter-type valve 1 , one way valve , three way stopcock with attached tubing , pneumatic inflatable splints , vacuum bean bag splints , leg traction splint , slings , dye methylene blue , ecg electrodes , pacing defibrillator pads , ecg roll , pelvic binder sheet , tongue blades ss , tourniquet , make up mouline kit , gum elastic bougie , lma different sizes 2 to 5 , combi tube , pericardiocentesis kit , ilma , miscellaneous consumables contingency etc , portale ultrasound machine with at least a convex probe and linear probe upgradable to echo probe , laptops with led screen dvd drive , desktop with led screen dvd drive , microphone lavaliere collar mike and sound system , smart tv minimum 65 inch for seminar room , laryngoscope with adult blades , finger pulse oximeter , scoop stretcher , table 6-8 foot , mayo stand-emergency table , portable iv stand , table for faculty class room , chairs for faculty class room , stool to stand on for cpr , trollies for mannequin , crash cart , clocks , podium , pointer , x ray view boxes , dust bins , mats , conference table , conference chairs , storage racks steel, consumables for nels, as per attached specification
Agency / Dept :
all india institute of medical sciences AIIMS
Due Date :
Aug 11, 2026 (16 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16357817
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
corrigendum tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 27, 2026 (1 day left)
Tender Value :
6495500
View Documents
T18 Ref No : 15426792
Location : nainital , uttarakhand
Source : GEM Tenders
tender for non-revolving class room chairs , revolving chairs , centre table vip grade , sofa set vip grade , installation of non-revolving class room chairs, manual seat tip up with back tilt semi-recliner with cup holder, adjustable height with wheels, metal recliner with cushion, 4x4 feet, wooden centre table for sofa set with glass top, lacquer furnish polished, installation to be done at bhowali nainital
Agency / Dept :
indian air force IAF
Due Date :
Jun 03, 2026
Tender Value :
0
View Documents
T18 Ref No : 16078286
Location : indore , madhya pradesh
Source : GEM Tenders
tender for class room desk with chair 3 and 2 seater
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Jul 23, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16078287
Location : indore , madhya pradesh
Source : GEM Tenders
tender for class room desk with chair 3 and 2 seater
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Jul 23, 2026
Tender Value :
0
View Documents
T18 Ref No : 15206567
Location : jind , haryana
Source : GEM Tenders
tender for study light , water dispenser , gas stove , big bucket 15 ltr , bathroom stool , white bath towel , colored small hand towel , dinner set , pressure cooker black 5 ltr. , pressure cooker black 10 ltr. , double bed sheet quilt , double bed sheet cotton with pillow cover , foot mat , ac quilt of soft best quality , crystal water jug 2 ltr. with glasses , curtain with rod of 7 feet doors , pillows , premium polyester curtains , premium mattresses double bed , premium mattresses double bed big , plastic chairs with armrest , conference table , deluxe revolving chair, generalized items, brightness minimum 500 lumens upto 1000 lumens alongwith adjustable arms and rotatable amp head 5w to 9w and battery backup upto 3 hour, (hot and cold) suitable for 20 ltr water can, automatic ignition high grade 6mm to 8mm toughened glass (scratch and heat resistance), isi certified, big bucket 15ltr for bathroom with mug, bathroom stool antiskid rubber, white bath towel big size, colored small hand towel, dinner set for 8 person having 60 pcs with all utensils of bone china with superior quality, pressure cooker black 5 ltrs., pressure cooker black 10 1tr., double bed quilt king size of soft fur best quality, double bed sheet king size cotton with pillow covers, foot mat of size 2 x 1.5ft, ac quilt of soft fur best quality material, water jug 2ltr with 2 glass (premium jug with crystal glasses), curtain with steel rod of 7 feet door of standard size(curtain should be made of premium material), pillows of reputed brand with premium quality, premium polyester curtain of size 9ft x 4 ft with all installation, premium mattresses double bed of size 6.25 ft x 3 ft and 6 inch thick (dual, reversible, medium soft and firm foam, anti- microbial technology), premium mattresses double bed of size 6.25 ft x 6 ft and 6 inch thick of (dual, reversible, medium soft and firm, plastic chair with armrest and cushion sheet and bed of reputed brands, wooden table u-type made of shisham wood for conference room in a length of 30 with necessary installation, deluxe revolving executive chair of seating size 20x21inch and seating height 17.5-21.5 inch with 650mm chrome base and 60mm nylon castor and class 4 gas lift
Agency / Dept :
department of irrigation
Due Date :
May 16, 2026
Tender Value :
2500000
View Documents
T18 Ref No : 15216507
Location : tawang , arunachal pradesh
Source : GEM Tenders
tender for chdh 2466 superstructure chdh cook house and dining hall size 13.05m x 6.10m x 4.75m height with 1.50m rear varandah shall be under job no 2466 as per list attached , construction material cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold ambuja ultratech jk dalmia acc , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone for rr masonary less than 6 inch , mild steel bar of size 6 to 8 mm dia conform to is 432 part 1 1982 make tata sail jsw , mild steel bar of size 10 mm dia and above conforming to is 432 part 1 1982 make tata sail jsw , water proofing compound conforming to is 2645 2003 make pidilite dr fixit fevicol , glass dividing strips 30 x 4mm make prayag saint gobain modigaurd , m s binding wire , quick setting compound make pidilite fevicol or equivalent , serving counter and cooking platform cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 , bricks sub class b , mild steel bar of size 6 to 8 mm dia conform to is 432 part 1 1982 , granite stone 20mm thick , construction material for soakage pit cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 , bricks bat , mild steel bar of size 10 mm dia and above conforming to is 432 part 1 1982 , pvc pipe 110 mm dia 3 mtr long make prince finolex supreme , pvc pipe 75 mm dia 3 mtr long make prince finolex supreme , pvc cowl 75 mm dia make prince finolex supreme , ms binding wire , pvc socket 110 mm make prince finolex supreme , b and r items fabrication from structural steel sectionas per list att , looking mirror of size 600 x 450 mm with 4 mm thick glass and 4 mm thick back ply , chromium plated piller cock swan neck with aerator and butter fly handle weight not less then 450 gm make ess ess prayag johnson suisse , stop cock angular type chromium plated brass 15 mm weight not less then 330 gm make ess ess prayag johnson suisse , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm make ess ess prayag johnson suisse , pvc connection 45 cm long 15 mm make supreme johnson suisse famingo , ppr pipe 32 mm dia make sfmc finolex supreme , ppr pipe 20 mm dia make sfmc finolex supreme , ppr elbow 90 degree 32 mm make sfmc finolex supreme , ppr elbow 20 mm dia make sfmc finolex supreme , ppr female thread socket 20 mm dia make sfmc finolex supreme , ppr plain t 20 mm dia make sfmc finolex supreme , ppr plain t 32 mm make sfmc finolex supreme , ppr reducer t 32 20 32 mm dia make sfmc finolex supreme , ppr union 32 mm make sfmc finolex supreme , tank connector 32 mm make sfmc finolex supreme , pvc wall clamp 32 mm make sfmc finolex supreme , pvc wall clamp 20 mm dia make sfmc finolex supreme , float valve 20 mm make sfmc finolex supreme , gate valve 32 mm make sfmc finolex supreme , m seal 150 gm pkt make pidilite fevicol m seal , taflon tape roll isi marked make supreme omega asbestos , solvent cement 150 gm tube make finolex fit well jindal , pvc waste pipe 32 mm and 1m long make supreme johnson suisse famingo , chromium plated waste coupling 32 mm dia make supreme johnson suisse famingo , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make johnson kajaria orient 1st quality confroming to is 156 2006 , non skid ceramic tiles of size 300mmx300mm on the floor. minimum thickness shall be between 6 to 8 mm tiles of make johnson kajaria orient 1st quality conforming to is 15622 2006 , cp grating 100 mm dia make ess ess prayag johnson suisse , pvc bend110 mm make prince finolex supreme , pvc t 110 mm make prince finolex supreme , cast iron floor trap with grating 100 mm dia , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type ends as per list att. , white cement confirming to is 8042 1989 make acc birla white ambuja , water storage tank triple layer 1000 ltrs confirming to is 12701 1996 make sintex ultrapure aqua polywell , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size make cera or equivalent model no 1009 hindware parryware , ppr reducer elbow 32mm x 20mm dia make sfmc finolex supreme , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm make cera hindware parryware , plastic dustbin of capacity 40 ltrs make neelkamal cello supreme , e and m items distribution box 8 way double door spn 240 volts copper bus bar and neutral link earthing stud conforming to is 13032 and is 8623 double door type make havells legrand l and t , mcb spn 240 volts 32 amps make havells l and t standard , mcb sp 6 to 32 amps make havells l and t standard , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to is 1554 part 1 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2.5 sqmm single core frls confirming to is 1554 part 1 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988 make havells finolex polycab , pvc casing capping of, chdh 2466, superstructure chdh cook house and dining hall size 13.05m x 6.10m x 4.75m height with 1.50m rear varandah shall be under job no 2466 as per list attached, construction material cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold ambuja ultratech jk dalmia acc, coarse sand free from vegetation, coarse aggregate 20mm graded, coarse aggregate 40 mm graded, coarse aggregate 40-63 mm graded, stone for rr masonary less than 6 inch, mild steel bar of size 6 to 8 mm dia conform to is 432 part 1 1982 make tata sail jsw, mild steel bar of size 10 mm dia and above conforming to is 432 part 1 1982 make tata sail jsw, water proofing compound conforming to is 2645 2003 make pidilite dr fixit fevicol, glass dividing strips 30 x 4mm make prayag saint gobain modigaurd, m s binding wire, quick setting compound make pidilite fevicol or equivalent, serving counter and cooking platform cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989, bricks sub class b, mild steel bar of size 6 to 8 mm dia conform to is 432 part 1 1982, granite stone 20mm thick, quick setting compound make pidilite fevicol or equivalent, construction material for soakage pit cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989, bricks bat, mild steel bar of size 10 mm dia and above conforming to is 432 part 1 1982, pvc pipe 110 mm dia 3 mtr long make prince finolex supreme, pvc pipe 75 mm dia 3 mtr long make prince finolex supreme, pvc cowl 75 mm dia make prince finolex supreme, ms binding wire, pvc socket 110 mm make prince finolex supreme, b and r items fabrication from structural steel sectionas per list att, looking mirror of size 600 x 450 mm with 4 mm thick glass and 4 mm thick back ply, chromium plated piller cock swan neck with aerator and butter fly handle weight not less then 450 gm make ess ess prayag johnson suisse, stop cock angular type chromium plated brass 15 mm weight not less then 330 gm make ess ess prayag johnson suisse, bib cock long spout brass chromium plated 15 mm weight not less then 330 gm make ess ess prayag johnson suisse, pvc connection 45 cm long 15 mm make supreme johnson suisse famingo, ppr pipe 32 mm dia make sfmc finolex supreme, ppr pipe 20 mm dia make sfmc finolex supreme, ppr elbow 90 degree 32 mm make sfmc finolex supreme, ppr elbow 20 mm dia make sfmc finolex supreme, ppr female thread socket 20 mm dia make sfmc finolex supreme, ppr plain t 20 mm dia make sfmc finolex supreme, ppr plain t 32 mm make sfmc finolex supreme, ppr reducer t 32 20 32 mm dia make sfmc finolex supreme, ppr union 32 mm make sfmc finolex supreme, tank connector 32 mm make sfmc finolex supreme, pvc wall clamp 32 mm make sfmc finolex supreme, pvc wall clamp 20 mm dia make sfmc finolex supreme, float valve 20 mm make sfmc finolex supreme, gate valve 32 mm make sfmc finolex supreme, m seal 150 gm pkt make pidilite fevicol m seal, taflon tape roll isi marked make supreme omega asbestos, solvent cement 150 gm tube make finolex fit well jindal, pvc waste pipe 32 mm and 1m long make supreme johnson suisse famingo, chromium plated waste coupling 32 mm dia make supreme johnson suisse famingo, ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make johnson kajaria orient 1st quality confroming to is 156 2006, non skid ceramic tiles of size 300mmx300mm on the floor. minimum thickness shall be between 6 to 8 mm tiles of make johnson kajaria orient 1st quality conforming to is 15622 2006, cp grating 100 mm dia make ess ess prayag johnson suisse, pvc pipe 110 mm dia 3 mtr long make prince finolex supreme, pvc bend110 mm make prince finolex supreme, pvc t 110 mm make prince finolex supreme, cast iron floor trap with grating 100 mm dia, curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type ends as per list att., white cement confirming to is 8042 1989 make acc birla white ambuja, water storage tank triple layer 1000 ltrs confirming to is 12701 1996 make sintex ultrapure aqua polywell, vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size make cera or equivalent model no 1009 hindware parryware, ppr reducer elbow 32mm x 20mm dia make sfmc finolex supreme, brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm make cera hindware parryware, plastic dustbin of capacity 40 ltrs make neelkamal cello supreme, e and m items distribution box 8 way double door spn 240 volts copper bus bar and neutral link earthing stud conforming to is 13032 and is 8623 double door type make havells legrand l and t, mcb spn 240 volts 32 amps make havells l and t standard, mcb sp 6 to 32 amps make havells l and t standard, pvc tape 19mm wide 5 m long make steelgrip anchor kinjal, cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to is 1554 part 1 1988 make havells finolex polycab, cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2.5 sqmm single core frls confirming to is 1554 part 1 1988 make havells finolex polycab, cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988 make havells finolex polycab, pvc casing capping of size 1 inch medium grade snow white make presto polycab finolex, pvc casing capping of size 20mm medium grade snow white make presto polycab finolex, switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona, led tube light fittings 20w rechargeable 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells bajaj philips crompton, steel screw full thread with rawl plug of 1.5 inch size isi marked 100 nos or pkt, pvc switch board snow white size 7 inch x 4 inch for sockets and switches make supreme polycab finolex, pvc switch board snow white size 8 inch x 10 inch for main switches db make supreme polycab finolex, pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 make supreme polycab finolex, switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts make anchor ssk cona, switch socket combination snow white 5 amp 230 volts make anchor ssk cona, service bracket 40mm dia gi tubing medium grade 1.5 mtr long make jindal tata kalinga, service cable pvc insulated aluminium conductor 1100 volt grade heavy duty served with inner sheathing of pvc tap, ceiling rose three terminal snow white make anchor ssk cona, led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts make havells bajaj philips crompton, pvc flexible wire copper conductor multi stranded 0.0016 76 make havells finolex plaza, pvc flexible conduit pipe 15 mm dia make polycab supreme finolex, pvc round squire block make polycab supreme finolex, fire extinguisher of one kilogram capacity dry power type, exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings make bajaj havells crompton, exhaust fan heavy duty metal frame of 230 v for 450 mm sweep make bajaj crompton usha, electric geyser 5 star of capacity 50 ltr make v guard racold bajaj crompton, refrigerator 220 ltr make whirlpool, water coolers capacity 40 liters per hours make canter, deep freezer 500 ltr make godrej, earthing plate earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side, ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame, funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make jindal tata kalinga, gi wire 4 mm diameter for earthing, charcoal, salt normal, lightening conductor air termination single pointed aluminium rod 12 mm dia and 300 mm long, testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw, aluminium strips 25 x 3.0 mm, galvanised iron strip 32 x 6 mm, funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make jindal tata kalinga, earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side, insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex, furniture chair dining wooden make of best quality first class hard wood, study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet pholestry make supreme or equivalent as per photograph of sample attached, study table of size 4x2 wooden top on round tube structture with three drawers unit as per photograph of sample attached, ss table of size 1800 mm x 900 mm x 750 mm thickness of top 1 mm on 40 mm dia verticle and under structure support, water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts hour with storage compartment complete and auto shut off facility make voltas lg usha, peg set of six fitted with galvanised secrew along the internal surface of the wall in the room make s prayag johnsen suisse
Agency / Dept :
indian army
Due Date :
May 12, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15245336
Location : talcher , odisha
Source : GEM Tenders
tender for class room dual desk and bench, overasll size 36in x 32in x 28in , class room dual desk and bench overasll size 42in x 33in x 30in , teachers table size- 4ft x 2fy x 2ft 6in , metal almirah , 5 shelves, size- 78in x 36in x 15in , metal open rack ,5 shelves, size - 78in x 36in x 15in , staff table size- 8ft x 4ft x 2ft 6in , news paper stand steel for library, size- 4ft x 2ft 6in x 1ft 6in , magazine stand steel for library, size- 5ft x 2ft 6in x 1ft 6in , visitors chairs long, 3 seater , mobile locker 10 x 6 cells, overall size- 7ftx5ftx1ft, furnitures, class room dual desk and bench, overasll size 36in x 32in x 28in, class room dual desk and bench overasll size 42in x 33in x 30in, teachers table size- 4ft x 2fy x 2ft 6in, metal almirah , 5 shelves, size- 78in x 36in x 15in, metal open rack ,5 shelves, size - 78in x 36in x 15in, staff table size- 8ft x 4ft x 2ft 6in, news paper stand steel for library, size- 4ft x 2ft 6in x 1ft 6in, magazine stand steel for library, size- 5ft x 2ft 6in x 1ft 6in, visitors chairs long, 3 seater, mobile locker 10 x 6 cells, overall size- 7ftx5ftx1ft
Agency / Dept :
mahanadi coalfields limited MCL
Due Date :
May 16, 2026
Tender Value :
3968821
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Class Room Chair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Class Room Chair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Class Room Chair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Class Room Chair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Class Room Chair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Class Room Chair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Class Room Chair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Class Room Chair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Class Room Chair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Class Room Chair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Class Room Chair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Class Room Chair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Class Room Chair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Class Room Chair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Class Room Chair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Class Room Chair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Class Room Chair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Class Room Chair is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All