sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

98Latest Carbide bar Tenders List

Latest Carbide bar Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Carbide bar tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Carbide bar tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Carbide bar Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Carbide bar tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Carbide bar Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Carbide bar Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Carbide bar Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Carbide bar tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Carbide bar Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Carbide bar sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Carbide bar tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Carbide bar tenders.

Is EMD mandatory for all Carbide bar tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Carbide bar work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Carbide bar tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Carbide bar Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17464029
Location : tiruvallur , tamil nadu
Source : GEM Tenders
LIVE TENDER
tender for 4180611869 coated carbide insert shet1504aetn-hr hvf8800-01493 , 4180611870 coated carbide insert dpd314-101a hvf8800-01494 , 4183101090 carbide insert for twin boring bar hvf8800-00745 , 4183101091 carbide insert for slotting cutter hvf8800-00738 , 4183131072 insert carbide ccmt 09t308 finish coated hvf6600-02424 hard alloy steel machining
Agency / Dept :
armoured vehicles nigam limited AVNL
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17498492
Location : raipur , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for 20 , flat file second cut 25 cm , flat file bastard 35 cm , hammer ball peen , hammer chipping , hammer mallet , hammer plastic , hand operated crimping tool up to 4mm , hand operated crimping tool up to 10mm , hand vice up to 37 mm , hollow punch set of seven pieces 6mm to 15mm , lifting jack screw 3 ton , lifting jack screw 5ton , lifting jack screw 20 ton , magneto spanner with 8 spanners , magnifying glass 75mm , oil stone , pipe flaring tool , piston ring expander , piston ring remover , piston ring groove cleaner , pliers flat nose 15 cm , pliers round nose 15 cm , insulated side cutting pliers 150 mm , prick punch 15 cm , punch letter 4mm , punch number 4mm , right cut snips 250mm , scraper flat 25 cm , scraper half round 25 cm , scraper triangular 25 cm , spanner t flocks for screwing up and up screwing inaccessible , steel measuring tape in a case 10 meter , stud extractor set of 3 , stud remover with socket handle , temperature gauge with sensor 0 to 100 0c , thermostate , thread pitch gauge metric , tyre pressure gauge with holding nipple , universal puller for removing pulleysbearings , valve lifter , spirit level metal type 2 to 300 mm basic length accuracy , vernier bevel protractor blade with acute angle attachment 300 mm , screw pitch gauge metric , universal scribing block , punch letter set 3 mm , punch number set 3 mm , file knife edge smooth 150 mm , file feather edge smooth 150 mm , feeler gaugegauge feeler , file swiss type needle set of 12 , file card brass or steel wire , pliers combination insulated 150 mm , wooden handle forged soldering iron , spanner double ended , glass magnifying 75 mm , clamp toolmaker 5 cm set of 2 , clamp toolmaker 7 point 5 cm set of 2 , machine reamer parallel helical flute12 to 16mm set of 5 , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold crosscut and diamond point 9 mm x 150 mm , chisel cold flat9 mm x 100 mm , chisel cold round nose 9 mm x 100 mm , drill chuck with key 12 mm , pipe wrench 400 mm , wheel dresser one for 4 units star dresser with holder length 150 mm , sleeve drill morse set of no , wing compass 254 mm or 300 mm , hand hammer with handle 1000 gm , knurling tool diamond 6mm , knurling tool straight 6mm , knurling tool diagonal 6mm , temperature gauge range 0 to 150 degree c , drill gauges letter drill gauge a to z , drill gauges number drill gauge 1 to 60 , drill gauges metric drill gauge 1 point 5mm , hollow punch straight shank hollow punch sets 5 to 12mm , bearing extractor universal gear puller 2 or 3 jaws adjustable , pulley extractor universal gear puller 2 or 3 jaws adjustable , prick punch100 mm , mallet dia 100 mm x 150 mm , aviation snips straight cut 300 mm , flat headed hammers with handle 750 gm , planishing hammer 250gm , snip bent left cut 250 mm , sine bar 125 mm , digital vernier caliper 0 to 150 mm with least count , engineers try square knife edge150 mm blade , lathe tools hss tipped set , lathe tools bit 6 mm x 75 mm hss carbide , lathe tools bit 8 mm x 75 mm hss carbide , lathe tools bit 10 mm x 75 mm hss carbide , arm strong type tool bit holder right hand , arm strong type tool bit holder left hand , arm strong type tool bit holder straight , stilson wrenches 250 mm , pipe cutter wheel type 6 mm to 25 mm , adjustable pipe chain tonge to take pipesup to 300 mm , adjustable spanner 380 mm long , welding helmet with coloured flame retardant glass , carrier for mounting components such as pb and relay boxes , screw driver 300 mm blade , screw, t and p, as per specification
Agency / Dept :
department of technical education DTE
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17523246
Location : chinsurah magra , west bengal
Source : GEM Tenders
LIVE TENDER
tender for steel rule , hammer ball peen , centre punch , prick punch , safety goggles clear glass good quality , marking table ci , bench vice , hammer copper brass , combination set , micrometer outside , micrometer inside , depth gauge micrometer , vernie caliper outside inside and depth , dial vernier caliper with metric , vernier bevel protractor , vernier micrometer , gauge feeler , gauge radius set , centre gauge , screw pitch gauge , drill angle gauge , universal dial test indicator plunger type , vernier height gauge , magnifying glass , plain ring , plug gauge , wheel dresser hunting on type with star cutter , wheel dresser diamond , screw thread micrometer interchangeable , morse taper plug ring gauge , sine bar with centers , slip gauge metric set , twist drill , drill twist set , drill chuck , tap die , reamer adjustable , parting tool holder with hss blade , tool bits , boring tool holder , dog carrier , angle plate , spirit level , tool makers button , combinationdrillcentredrill , oil stone , tap wrench adjustable , tool bit assorted sizes on holder , machine vice swivel base , chalk board on mobile stand , spare grinding wheel ajax type for carbide tool , angle gauge for tool grinding , hand chaser , revolving center to suit lathe tailstock , tool cemented carbide assorted shaped external for steel turning , thread plug gauge , machine chaser , gauge drill grinding , magnetic chuck , fire extinguisher , bucket for fire extinguisher , bore dial gauge stems , power saw machine hydraulic feed system , digimatic electronic vernier caliper , digimatic electronic outside micrometer, toolsmachineryitemsequipmentforturnertrade, as per specification
Agency / Dept :
department of industrial training
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
17.74L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17572239
Location : lucknow , uttar pradesh
LIVE TENDER
tender for supply, testing & commissioning of petro -supply, testing & commissioning of petrol driven power chain saw cutter. specifications (i) two stroke petrol driven air cooled (ii) output power - 6 hp (iii) engine speed at no load (in rpm) - 12000 - 14000 (iv) fuel tank capacity - 0.7 ltrs - 1.0 ltrs (v) guard bar length - 20 inch (vi) type of blade - carbide tipped blade (vii) type of fuel - petrol (viii) weight (kg) - 5 kg - 8 kg (ix) make - makita/bosch/stihl or similar. warranty period 30 months from the date of supply., supply, testing & commissioning of petrol driven power chain saw cutter. specifications (i) t wo stroke petrol driven air cooled (ii) output power - 6 hp (iii) engine speed at no load (in rpm) - 12000 - 14 000 (iv) fuel tank capacity - 0.7 ltrs - 1.0 ltrs (v) guard bar length - 20 inch (vi) type of blade - carbide tip ped blade (vii) type of fuel - petrol (viii) weight (kg) - 5 kg - 8 kg (ix) make - makita/bosch/stihl or similar. warranty period 30 months from the date of supply. - warranty period: 30 months after the date of deliv ery
Agency / Dept :
northern railway NR
Due Date :
Oct 26, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17632479
Location : alwar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for steel rule , try square , caliper inside , caliper , caliper outside , divider spring , scriber , punch centre , screw driver , chisel cold flat , hammer ball , hammer ball peen , file flat 250 , file half round , hacksaw frame , safety goggles , punch dot , straight edge steel , spirit level , stud extractor , micrometer outside , vernier caliper , vernier height gauge , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , universal scribing , punch letter set , punch number set , portable hand electric drill machine , drill twist straight , taps and dies , file knife edge , file feather , file triangular , file round , file square , feeler gauge , file flat , file swiss , file hand , file card , oil can , plier combination , wooden handle , spanner double ended , spanner adjustable , interchangeable , double ended , glass magnifying , clamp tool maker , c clamp , hand reamer , machine reamer , scraper flat , scraper triangular , scraper half round , chisel cold , drill chuck , pipe wrench , pipe vice , adjustable pipe , wheel dresser , vice machine , sleeve drill morse , vice bench , bench working , black board , wing compass , hammer hand , torque wrench , power tools , different profile , knurling tool , indexable boring bar , temperature gauge , dowel pin , standard tap screws , lapping plate dia 6 , medium carbon heat treated , caps screws , drill gauges , cast iron globe valve , c i sluice gate valve , stop cock , slip on forged steel , pipe threading , pulleys for v belt , v belt and flat belt , packing gasket , washer clutch keys , hollow punch , bearing different , lifting sling , bearing extractor , pulley extractor , trammel , poker , punch prick , mallet , aviation snip straight , flat headed hammer , hammer planishing , snip bent left cut , stake hatchet with leg , stake grooving , gauge slip metric , gauge snap , gauge plug , gauge telescopic , dial test indicator on stand , sine bar , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator , engineer try square , surface roughness comparison plates , carbide wear , lathe tools h s s tipped set , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type , adjustable pipe chain tong , s s and s c centre lathe , drilling machine , welding cable , lugs for cable , earth clamps , welding torch , gas lighter , hammer chipping , gloves leather , leather apron , spindle key , welding torches , welding goggles , welding helmet , tip cleaner , pneumatic trainer kit , hydraulic trainer kit , steel rule 150mm with metric and british graduation, try square 150 mm blade, caliper inside 150mm spring, caliper 150 mm hermaphrodite spring type, caliper outside 150 mm spring, divider spring joint 150 mm, scriber 150mm x 5mm, punch centre 120 mmx10mm, screw driver 150mm x 6mm, chisel cold flat 20mmx150mm, hammer ball peen450 gm 1lb with handle, hammer ball peen 220 gm 1 2 lb with handle, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles, punch dot100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm type, stud extractor ezy out, micrometer outside 0 to 25 mm, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, universal scribing block 220 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 12 mm by 0 5 mm, taps and dies complete set in a box b s w whitworth, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, feeler gauge, file triangular 200 mm second cut, file flat 300 mm second cut safe edge, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, spanner double ended, spanner adjustable, interchangeable ratchet socket, double ended tubular box spannerr, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c clamp 100 mm, c clamp 200 mm, hand reamer set taper pin straight flute, machine reamer parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b s p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, black board with easel, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg with handle, torque wrench, power tools for fastening capacity, different profile gauges plate type for demonstration, knurling tool diamond straight and diagonal, indexable boring bar with inserts, temperature gauge range 0 150, dowel pin, standard tap screws, lapping plate dia 6, medium carbon heat treated alloy steel metric studs and bolts, caps screws, drill gauges, cast iron globe valve flanged type, c i sluice gate valve flanged type, stop cock, slip on forged steel flange, pipe threading die with handle, pulleys for v belt or flat belt, v belt and flat belt, packing gasket, washer clutch keys jib cotterand circlip, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel, poker, punch prick, mallet, aviation snip straight, flat headed hammer with handle, hammer planishing, snip bent left cut, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go, gauge plug single ended, gauge telescopic, dial test indicator on stand, sine bar, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator s gauge dial indication, engineer s try square knife edge, surface roughness comparison plates, vernier bevel protractor, carbide wear block 1 mm 2 mm, lathe tools h s s tipped set, lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type, adjustable pipe chain tong, spanner adjustable, s s and s c centre lathe all geared, drilling machine, welding cable, lugs for cable, earth clamps, welding torch tips of different sizes, gas lighter, hammer chipping 300 gm, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet with colored flame retardent glass, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
21.02L
View Documents
T18 Ref No : 17517835
Location : vadodara , gujarat
Source : GEM Tenders
LIVE TENDER
tender for hdpe material granules , machine hacksaw blade , carbide side cutting tool , ms round bar , casting block , casting round , ms c channel , gi sheet , m.s. square bar , carbide boaring tool , rj 45 connector , hpmv lamp with holder , incandescent filament bulb , 23 swg bare copper , 1 by 18 pvc aluminium wire , 3 by 20 pvc aluminium wire , 7 by 20 pvc aluminium wire, procurement of raw material, 3 mm, 450x25x3015, rh 16x16, rh 12x12, dia 45mm, dia 32mm, dia 60mm, 50x50x50, 30x30x100, dia75x30, dia 120x30, dia 35x100, dia 35x150, 75x35x6, 24 swg 8x4 ft, 10 mm, 25 mm, 30 mm, 36 mm, 12mm, for lan cable, 125 watt, 40 watt, 60 watt, 100 watt, 200 watt, 23 swg, 1 by 18 pvc al, 3 by 20 pvc al, 7 by 20 pvc al
Agency / Dept :
department of employment and training DET
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
2.63L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17564433
Location : limbdi , gujarat
Source : GEM Tenders
LIVE TENDER
tender for mm least count , comparators gauge - dial indication with stand and bracket.lc 0.01mm , surface roughness comparison platesn1 - n12 grade , carbide wear block., set of 1 mm and 2 mm , arm strong type tool bit holder., right hand , arm strong type tool bit holder., left hand , arm strong type tool bit holder., straight , arc welding table, all metal top with positioner. 1200 x 1200 x 750 mm , gas welding table with positioner with fire bricks 900 x 600 x 750 mm , welding torch tips of different sizes for oxy acetylene gas welding to fit nozzle no. 1, 2 and 3 , chipping hammer. , spindle key for cylinder valve. , welding torches. nozzles no. 1, 2 and 3 , tip cleaner , star head screw driver set of 5 pieces 100 mm to 300 mm , spanner d.e. set of 12 pieces 6mm to 32mm , angle plate adjustable 250x150x175mm , angle plate size 200x100x200mm , copper bit soldering iron 0.25 kg , dial gauge type 1 gr. a , drift punch copper 15 cm , files assorted sizes and types including safe edge file, 20 nos , hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 to 14.25 mm and 14.25 to 15.75 mm , hand shear universal 250mm , hand vice up to 37 mm , hollow punch set of seven pieces 6mm to 15mm , left cut snips 250mm , scraper half round 25 cm , scraper triangular 25 cm , scriber with scribing block universal , spanner t. flocks for screwing up and up screwing inaccessible , stud extractor set of 3 , stud remover with socket handle , taps and dies complete sets, 5 types , taps and wrenches, metric , v block 75 x 38 mm pair with clamps , plumb bob 115 grams , bradawl 150 mm x 6mm square pointed , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm. , conduit pipe bending machine, suitable for 15 mm,18 mm, 25 mm and 30 mm pipe , drill bit 6mm, 8mm and 10 mm , file flat round 150 mm smooth , spanner set of 6 double ended 18x18, 20x22, 21x23, 24x27, 25x27, 30x32 , foot print grip, 15 cm, set of 8, 22 cm, 150 x 100 x 100 mm, 5, 6, 8, 10, 12 mm set of 5, 6-22 mm set of 8 pcs., 12 mm driver, sized 10-32 mm set of 18 socket & attachment, 6-25 mm set of 10 with tommy bar, 5 cm and 7.5 cm set of 2, (taper pin straight flute) nominal dia. 6, 8, 10, 12, 16, parallel (helical flute) 12-16 mm set of 5, 9 x 100 mm, 12 mm, 400 mm, bsp cover pipe size 1 inch or 0.75 inch, (one for 4 units), star/dresser with holder, length 150 mm, diamond point, 254 mm. or 300 mm., metric standard, set of diamond,straight,diagonal, 1 inch shank, dia. 6 inch, letter a to z, number 1 to 60, rachet type die head of 0.5 inch, rachet type die head of 0.75 inch, rachet type die head of 1 inch, jigs and fixture, sample-for demonstration, 8 mm nominal dia. single leg sling, 2 or 3 jaws adjustable, pocker, straight cut 300 mm, planishing hammer, left cut, 25 cm, 100 x 100 x 300 mm, 25 to 50 mm by 5 mm, set of 6 pieces, 5 to 55 by 5 mm. set of 11 pcs., 8 - 150 mm, 0.01 mm least count, lc 0.01mm, n1 - n12 grade, set of 1 mm and 2 mm, right hand, left hand, straight, 1200 x 1200 x 750 mm, 900 x 600 x 750 mm, to fit nozzle no. 1, 2 and 3, chipping hammer., spindle key for cylinder valve., nozzles no. 1, 2 and 3, tip cleaner, set of 5 pieces 100 mm to 300 mm, set of 12 pieces 6mm to 32mm, 250x150x175mm, 200x100x200mm, 0.25 kg, type 1 gr. a (complete with clamping devices and with magnetic stand), assorted sizes and types including safe edge file (20 nos), 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 to 14.25 mm and 14.25 to 15.75 mm, 250 mm, up to 37 mm, 6mm to 15mm, 25 cm, scriber with scribing block universal, spanner t. flocks for screwing up and up screwing inaccessible, set of 3, with socket handle, complete sets (5 types), metric, 75 x 38 mm, 115 grams, 150 mm x 6mm square pointed, for 15 mm to 30 mm., for 15 mm,18 mm, 25 mm and 30 mm pipe, set of 6mm, 8mm and 10 mm, flat round 150 mm smooth, double ended (18x18, 20x22, 21x23, 24x27, 25x27, 30x32), 50 mm jaw
Agency / Dept :
department of employment and training DET
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17564434
Location : sayla , gujarat
Source : GEM Tenders
LIVE TENDER
tender for iti sayla boq 3 mechanical group - dividers 200mm , scriber 150 mm double ended , tong flat.350 mm long , tip cleaner for gas welding torch range 0.4 mm to 1.6 mm , spindle key o2,co2,c2h2,arlenth 15cm , universal weld measuring gauge , inverter based welding machine with all accessories 300a , ocv 60 100 v, 60 per. duty cycle , weld measuring guage filletrange 3.2 mm to 25.4 mm , pug cutting machine capable of cutting straight or circular with all accessorie , hand shearing machine capacity to cut 6mm sheets and flats , portable abrasive cut off machine capacity abrasive wheel 355mm 14 inches , suitable gas cutting table 900x600x750mm , scriber 15 cm , air ratchet with standard accessories heavy duty 0.5 inch , angle plate size 200x100x200mm , circlip pliers expanding and contracting 15cm and 20cm , copper bit soldering iron 0.25 kg , drift punch copper 15 cm , hand reamers adjustable , hand shear universal 250mm , scriber with scribing black universal , spanner d.e. set of 12 pieces 6mm to 32mm , spanner t. flocks for screwing up and up- screwing inaccessible , spanner, ring set of 12 metric sizes 6 to 32 mm. , stud remover with socket handle , taps and wrenches metric complete metric set , v block 75 x 38 mm pair with clamps , caliper hermachrodite.spring 15 cm , divider spring 15 cm , dot punch 100 mm , file flat 2nd cut 300 mm safe edge , machine reamer parallel helical flute 12 16mm set of 5. , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , different profile gauges plate type for demonstration metric standard , knurling tool diamond, straight and diagonal , indexable boring bar with inserts 1inch shank , lapping plate 6 inch dia , drills guage straight shank letter sizes a to z with guage , drills guage straight shank wire size 1 to 60 with guage , die or die stock complete bsp 0.5 , die or die stock complete bsp 0.75 inch , die or die stock complete bsp 1 inch , jigs or fixture samplefor demonstration may be manufactured in house , pulleys for v belt or flat belt to fit on 50mm dia. shaft with key slot , steel keys may be manufactured in house to fit with key slot of shaft or pulley , damaged old spur gear to fit 50mm dia. shaft , belt v to fit on pulley , belt flat to fit on pulley , washer, clutch, keys, jib, cotter or circlip minimum 25mm size, carbon steel material , drill drift may be manufactured inhouse 200mm hardened and black finish , bearing different types each type of diameter 25mm min. , lifting sling 8mm nominal dia. single leg sling , poker 900 mm long , hammer planishing , gauge plug single ended 5 to 55 by 5 mm.set of 11 pcs , lathe tools h.s.s. tipped set. , lathe tools bit 6 mm x 75 mm hss carbide , lathe tools bit. 8 mm x 75 mm hss carbide , lathe tools bit. 10 mm x 75 mm hss carbide , plumb bob 115 grams , bradawl 150 mm x 6mm square pointed , rawl punch holder and bits no. 8,10 , rawal tool holder or bit no. 8, 10, 14, or 16 , vice hand 50 mm jaw, 200mm, 150 mm double ended, 350 mm long, range 0.4 mm to 1.6 mm, lenth 15cm, universal weld measuring gauge, 300a , ocv 60 100 v, 60 per. duty cycle, range 3.2 mm to 25.4 mm, pug cutting machine capable of cutting straight & circular with all accessorie, capacity to cut 6mm sheets and flats, capacity abrasive wheel 355mm 14 inches, 900x600x750mm, 15 cm, heavy duty 0.5 inch, 200x100x200mm, 15cm and 20cm, 0.25 kg, 15 cm, hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 to 14.25 mm and 14.25 to 15.75 mm, 250mm, scriber with scribing black universal, 6mm to 32mm, spanner t. flocks for screwing up and up- screwing inaccessible, 6 to 32 mm., stud remover with socket handle, taps and wrenches metric complete metric set, 75 x 38 mm, 15 cm, 100 mm, 300 mm safe edge, 12 16mm set of 5., 150 mm, different profile gauges plate type for demonstration metric standard, knurling tool (diamond, straight diagonal, indexable boring bar with inserts 1inch shank, lapping plate 6 inch dia, drills guage straight shank letter sizes a to z with guage, drills guage straight shank wire size 1 to 60 with guage, bsp 0.5 inch, bsp 0.75 inch, bsp 1inch, jigs fixture sample for demonstration may be manufactured in house, 50mm dia., steel keys may be manufactured in house to fit with key slot of shaft or pulley, 50mm dia., belt v to fit on pulley, belt flat to fit on pulley, 25mm size,, 200mm, 25mm min., 8mm, 900 mm long, hammer planishing, 5 to 55 by 5 mm. set of 11 pcs, lathe tools h.s.s. tipped set., 6 mm x 75 mm, 8 mm x 75 mm, 10 mm x 75 mm, 115 grams, 150 mm x 6mm square pointed, no. 8,10, no. 8, 10, 14, or 16, 50 mm jaw
Agency / Dept :
department of employment and training DET
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17564440
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for kubernagar boq 2 - ms angle , ms angle , ms pipe dia , ms sheet , msangle , ms channel , ms hollow pipe , ms pipe , ms square bar , ms squarebar , scr testing board circuit with pcb size 120x800065 , csk screw and nut , ma mono plug , marcury chock 125 watt 250v , marcury lamp 125 watt with holder 250volt , side and face cutter , silicon carbide grinding wheel , mercury , metal condut pipe , metal detector loose kit , methanol lab grade , methyl iso butyl ketone , methyl orange indicator , micro 12v soldering and desoldering station , mirror pieces , monitor power adapter , mould realese wax , ms hinges , silver brazing flux , m seal , multimeter kit , silver brazing rod , mythyle orange , nail inch , silver nitrate , network cable tester , network switch 8 port , nikon ac adapter , nikon lithium ion battery , nipple diameter 25mm , npn transistor , nrv , single compression gland 19mm , nut boult 6 mm , nvme 512gb ssd , pvc cable gland 19mm , oil filter , oil filter maruti , oil pump gasket single , on off push button switch , ortho phospheric acid , p clip , p.v.c. foure way connector , p.v.c. pipe 25 mm , paint brush set flat and round , paraffin liquid , patch code , pendant holder , pent clip , petrol pipe , ph paper , phenol lr , phenyle , piping coard , smd componenet diode , plaster of paris , plastic board , plastic bobbin small , smd componenet , se winding wire , se cu wire 36 swg , se cu wire 29 swg , plywood sheet , pnp transistor bc 557 and 558 , poliaster capacitor 0.1 microfarade, 600v , pot 10k , pot 570 ohm , pot 5k , potassium bromate lr , potassium hydroxide , potassium parmangnate , potassium sulphate lr , pot 1 megaohm , power contactor , power strip with 5mtr cable , pressure guage 800psi with valve , s s flat 50x3 , psychrometric chart pvc sheet , ptc relay , punch down tool for rj-45 keystone jack , pvc round block , pvc t , pvc 1 way gang box , pvc 2 way gang box , pvc 3 way gang box , pvc 4 way gang box , pvc bend 19mm dia , pvc electrical board , pvc casing caping 19mm dia , pvc casing caping 25mm , pvc casing caping all corner , pvc casing caping tee , pvc cotton sleeve , pvc nitrile , pvc pipe , pvc roundblcok , pvc switch board , pvc transperent, full wave rectifier circuit kit, radiator hose pipe for stationary diesel engine with clamp, 5 a, 10e and 1w, 9mm, 38mm, 8x4x swg 22, 8 by 4 swg 24, 8 by 4 swg 28, 1/2 inch, 1/2 inch dia, 25 mm dia, dia 2 mm, gasket packing set for stationary diesel engine, rawl plug, general pupose smd pcb, geomatric set, all shape in 3d, 8 swg, red yellow and white, grinding blade, 250 mm, half wave rectifier circuit kit, 4 mm 5 mm 6 mm, handle for bench vice (metal), 12 inch x12 inch, 4 mm (8 swg), hdmi type a cable, a/f 18 mm, m6 x 16 mm, m8 x 10 mm, hookup wire, 1 inch, 12x12x150, 5/8 by 5/8 by/6, 1/4 by 1/4 by6, lr grade, ic 723, ic 7400, ic 7402, ic 7805, ic 7812, ic 7905, ic 8083, ic at89c51, ic based am receiver loose kit, ic based am transmitter loose kit, ic based fm reciver loose kit, ic based fm transmitter loose kit, ic lm317, ic lm317t, 250v, infrarede motion ditector 360 digree censor, 6 amp, ipa solution pcb cleaner 500 ml, iron powder, 4x2x45 mm, kirchoffs current law circuit with kit, kirchoffs voltage law circuit with kit, rediator cap, 16 amp, 12v 500 ma dc sugar type, 100w 250volt, 200w 250v, 40w 250volt, 6 volt, 60w 250volt, lamp holder pendent type, lan faceplate with io and gangbox, lan switch 8-port, latex nitrile hand gloves, leatheroid paper, 5mm 3w 250v, 5 mm red, dia 3.15mm, litmus paper, 12 volt, 5 volt, low voltage dc servo motor, luxor oil-based paint ink white of tip size 0.5 mm permanent paint markers, 25mm, 40 by 40 by 8 mm, 40 by 40 by 6 mm, 50x03, 50x06, 125 x 55 x 1.6 mm, 40 x 40 x 6 mm, 75 x 40 mm, mc 75 mm, dia 32 mm, dia 50x03mm, dia 50x06mm, 2mm thick 8 by 4 feet, 32 mm, 20 x 20 mm, size 120x80 layout & loose componant placement and practical procedure step by steps papers in gujarati, m3 and 40 mm, 6.35mm to 3.5mm 4 pole, 125 watt/ 250v, 125 watt with holder 250volt, 80x18x27 dia, 300x40x38 mm, mercury, 19 mm, metal detector loose kit, methanol lab grade, methyl iso butyl ketone, methyl orange indicator, 1cm by 1cm, 12v 2a 24w, mould realese wax, 5 inch, silver brazing flux, m seal, multimeter kit, silver brazing rod, mythyle orange, nail 17 by 1 inch, silver nitrate, network cable tester, network switch 8 port, eh 71p, input 100v 240v 50/60 hz output 5v 1a dc, en - el23 3.8v, 1850mah 7.1wh, 25 mm dia., npn transistor bc 547 and 548, nrv 1/4 inch, 19 mm, 6 mm, 512gb, 19mm, oil filter, oil filter maruti, oil pump gasket single, on off push button switch, ortho phospheric acid, p clip, pvc foure way connector, 25 mm, paint brush set flat and round, paraffin liquid, male 2 sided 10 inch length, pendant holder, pent clip, petrol pipe, ph paper, phenol lr, phenyle, piping coard, smd componenet diode, plaster of paris, 10 inch x 12 inch, dia-10mm length 50 mm, asoorted resistor, 23 swg, 36 swg, 29 swg, 3 x 3, pnp transistor bc 557 and 558, 0.1 microfarade, 600v, 10k, 570 ohm, 5k, 1 megaohm, 2no,2nc type 440volt, 5mtr cable, pressure guage 800psi with valve, 50x3 mm, 4 foot x 4foot, ptc relay, punch down tool for rj45 keystone jack, 2.5 inch x1 inch, 3/4 inch, pvc 1 way gang box, pvc 2 way gang box, pvc 3 way gang box, pvc 4 way gang box, 19mm dia, 10 inch x 12 inch 16m, 8 x 6, 12m, 25mm, pvc casing caping all corner, pvc casing caping tee, pvc cotton sleeve, pvc nitrile latex gloves, 6 switch and 5 socket 10x6, pvc transperent sheet, silicon grease, concave and convex
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
2.4L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17564442
Location : bhabhar , gujarat
Source : GEM Tenders
LIVE TENDER
tender for scriber 150 mm double ended , hammer sledge double faced 4 kg , spindle key for opening cylinder valve , metal rack 1820x1210x450 mm , first aid box , multi angle magnetic clamp set - metal base 18x10x10 cm- , welding helmet auto darkening type , fire extinguisher soda acid foam type 7 ltr cap , power cutter electrically operated -portable abrasive cut off machine- , swagging and flooring tool kit 45 degree tubing 18 to 34 inch , ag 4 grinder , chuck drill 12 mm capacity with key , tailors card scale triangular , tailoring woodenplastic square , thread cutter 24 , rule - scale- plastic 2460 cm , patern notcher , stand wooden t shaped for hanging dress , electric steam iron 450750 watts 230 v with automatic heat control , machine attachmentzipper foot , machine attachmenttucker foot , machine attachmenthem folder , machine attachmentzigzag foot , glass show case for display of jobs 450 mmx600mmx850 mm , dress for dummies ladies 10 -half- , dress for dummies ladies 12 -full- , dress for dummiesgents 42-full- , electrician screw driver 250mm , philips screw driver set of 5 pieces 100 mm to 300 mm , spanner ring set of 12 6 to 32 mm -metric- , air ratchet with standard accessories , angle plate adjustable 250x150x175mm , cylinder bore gauge capacity 5 meters flexible in case 20 to 160 mm , cylinder liner dry and wet liner press fitand slidefit liner , fuel injection pump dismantling tool kit universal vice , hand shear universal 250mm , insulated screw driver 20 cmx9mm blade , insulated screw driver 30 cmx9mm blade , oil stone 15 cmx5 cmx25 cm , pipe flaring tool , piston ring groove cleaner , radiator cut sectiondown flow , radiator pressure cap, iti bhabhar tools equipment boq, 150 mm double ended, sledge double faced 4 kg, item spindle key for gas cylinder valve application for opening and closing gas cylinder spindle valves material forged carbon steel high strength steel construction heavyduty singlepiece profile square socket suitable for standard cylinder spindle finish chrome plated corrosion resistant length approx 100-150 mm operation easy and safe manual operation compatibility suitable for oxygen co2 argon and other industrial gas cylinders, type heavyduty mild steel ms storage rack overall size 1820x1210x450 mm material crca mild steel with powdercoated finish construction slotted angle boltless knockdown design no of shelves minimum 5 adjustable shelves shelf material ms sheet minimum 08to10 mm thick frame thickness minimum 18to20 mm load capacity minimum 100 kg per shelf -uniformly distributed load- surface finish epoxy polyester powder coating rust and corrosion resistant colour grey bluegrey accessories nuts bolts shelf supports and adjustable levelling feet, type wallmounted portable first aid box material mild steel -ms- abs plastic with powdercoated finish -ms type- size approx 300x240x100 mm -or equivalent- colour white with green cross marking construction sturdy body with hinged door and secure latchlock compartments multiple compartmentstrays for organized storage of first aid items mounting suitable for wall mounting with fixing accessories contents supplied with standard first aid contents as per relevant bisfactory requirements -bandages sterile gauze cotton adhesive tape antiseptic solution scissors safety pins disposable gloves burn dressing triangular bandage crepe bandage eye pad ors etc- application suitable for iti workshops, type multiangle magnetic welding clamp magnetic holder set base size approx 180x100x100 mm material heavyduty steel body with permanent ferrite rare earth magnet holding angles 30degree 45degree 60degree 75degree 90degree and 135degree -or equivalent multiangle capability- magnetic holding force minimum 22 kg -50 lbs- per clamp surface finish powdercoated rust and corrosion resistant application suitable for holding ferrous workpieces during welding soldering brazing pipe fitting fabrication and assembly compatibility suitable for flat round square and angle iron workpieces features strong magnetic grip quick positioning handsfree operation reusable easy to clean accessories supplied as a complete set ready for use warranty minimum 1 year against manufacturing defects, type auto darkening welding helmet helmet material highimpact heatresistant polyamidenylon viewing area minimum 90x35 mm optical class 1112 or better shade range din 9 13 -adjustable- light state din 4 power supply solar cell with replaceable lithium battery sensitivity and delay adjustable sensitivity and delay controls uvir protection permanent din 16 protection headgear adjustable ratchettype headband with tilt and size adjustment applications suitable for mma -arc- migmag tig welding plasma cutting and grinding mode standards conforming to en 175 en 379 ce or equivalent international standards warranty minimum 1 year against manufacturing defects, type portable soda acid mechanical foam fire extinguisher capacity 7 litres body material seamless mild steel -ms- cylinder with corrosionresistant epoxy powdercoated finish extinguishing agent soda acid mechanical foam as applicable operating pressure as per is standard working temperature 5degreec to 55 degree c -or as per manufacturer specification- discharge time minimum 30 seconds discharge range minimum 4 metres mounting supplied with wall mounting bracket accessories discharge hose nozzle operating lever pressure indicator -where applicable- safety pin with seal compliance conforming to is 15683 and manufacturedlicensed as per bis requirements suitable for class a and class b fire hazards -wood paper cloth rubber flammable liquids- warranty minimum 1 year against manufacturing defects, portable electrically operated abrasive cutoff machine 355 mm wheel 254 mm bore 2000 2400 w motor 3800 4100 rpm 220 240 v ac single phase with safety guard workpiece clamp and cutting wheel, type manual swaging and 45degree flaring tool kit flaring angle 45degree tube capacity 18 316 14 516 38 12 58 and 34 material hardened alloy steel yoke flaring bar and swaging adapters application suitable for copper aluminium brass and soft steel tubing flaring type single 45degree precision flare swaging tools complete set of swaging adapters for the specified tube sizes construction heavyduty forged steel yoke with hardened precisionmachined clamping bar accessories flaring bar yoke swaging punchesadapters tube cutterdeburringreaming tool and blowmoulded carrying case finish corrosionresistant black oxidechrome plated finish suitable for refrigeration airconditioning plumbing automotive and general workshop applications warranty minimum 1 year against manufacturing defects, type portable electric angle grinder -ag4- wheel diameter 100 mm -4 inch- rated power 850 1000 w no load speed 10000 12000 rpm spindle thread m10 power supply 220 240 v ac 50 hz single phase switch type slidepaddle switch with safety lock body ergonomic compact doubleinsulated housing accessories side handle wheel guard flange set spannerwrench user manual application suitable for grinding cutting deburring and surface finishing of metal and masonry warranty minimum 1 year against manufacturing defects, keytype drill chuck capacity 15 12 mm heavyduty hardened steel construction precision machined suitable for drilling machine complete with chuck key, triangular tailors card scale approx 30 cm length durable plastic construction clear permanent metric graduations in mm cm suitable for tailoring and garment patternmaking applications, tailoring square lshaped rightangle type made of durable woodplastic approx 12x12 inch with clear metricinch graduations accurate 90degree angle and smooth edges suitable for garment pattern making, thread cutter 24 inch -approx 600 mm- heavyduty manual type with sharp hardened steel blade and durable ergonomic handle suitable for tailoringtextile workshop use, plastic measuring rulescale 24 inch -600 mm- length durable plastic construction with clear and permanent metricinch graduations straight and smooth edges suitable for tailoring and workshop measurement, manual pattern notcher handoperated hardened steel cutting blade durable ergonomic handle suitable for making vu notches on paper and cardboard garment patterns for tailoring applications, wooden tshaped dress hanging stand made from good quality seasoned hardwood sturdy construction with stable base and smooth polished finish suitable for hangingdisplaying dresses and garments in tailoringiti workshop, electric steam iron 450 750 w 230 v ac single phase with automatic heat controladjustable thermostat steam function durable nonstickstainlesssteel sole plate and safety thermal protection suitable for tailoring workshop use, sewing machine zipper foot attachment durable metalalloy construction suitable for standard sewing machines designed for close and accurate stitching along zipper teeth suitable for tailoringgarmentmaking applications, sewing machine tucker foot attachment durable metalalloy construction suitable for standard sewing machines designed for making uniform and parallel tuckspleats in fabric suitable for tailoringgarmentmaking applications, sewing machine hem folder attachment durable metal construction suitable for standard sewing machines designed for uniform folding and stitching of fabric edges suitable for tailoring and garmentmaking applications, sewing machine zigzag foot attachment durable metalalloy construction suitable for standard sewing machines designed for zigzag decorative and general stitching of fabrics suitable for tailoringgarmentmaking applications, item glass showcase for display of jobs overall size 450x600x850 mmtype glass display showcase frame ms aluminium frame with durable finish glass clear toughenedtempered glass shelves minimum 2 3 adjustable glass shelves door lockable glass door base strong and stable base finish smooth corrosionresistant and easy to clean application display of trainee jobs models garments and finished work, ladies dress dummy halfbody type standard size durable fibreplastic body with suitable fabric covering for pinning sturdy construction suitable for garment draping pattern making fitting and display, ladies dress dummy fullbody type size 12 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, gents dress dummy fullbody type size 42 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, item electrician screwdriver overall length 250 mm type insulated electrician screwdriver material chrome vanadium highcarbon steel tip hardened precisionground handle insulated ergonomic nonslip insulation suitable for electrical work finish corrosionresistant application electrical installation maintenance and iti workshop use, item phillips screwdriver set quantity 5 pieces tip type phillips crosshead length range 100 mm to 300 mm blade material hardened chrome vanadium alloy steel tip precisionground hardened and corrosionresistant handle ergonomic nonslip impactresistant sizes assorted sizes suitable for general electricalmechanical work application electrical maintenance and iti workshop use accessories complete set supplied in suitable holdercase, item ring spanner set quantity 12 pieces type doubleend ring spanner size range 6 to 32 mm -metric- material chrome vanadium steel finish chrome plated corrosion resistant ring profile 6point 12point suitable for standard fasteners marking clearly marked size on each spanner application mechanical fitting maintenance and iti workshop use, item pneumatic air ratchet wrench drive size 12 inch -127 mm- square drive type airoperated pneumatic working pressure 63 bar -90 psi- approx free speed minimum 150 rpm torque minimum 60 nm air inlet 14 inch material heavyduty alloy steel body direction forwardreverse operation accessories standard socketaccessory set air hose connector and suitable case application automobile servicing mechanical maintenance and iti workshop use, item adjustable angle plate size 250x150x175 mm type adjustable tilting angle plate material highquality cast iron steel construction heavyduty rigid and stable adjustment adjustable angle with secure locking arrangement surface machinedground working surfaces finish corrosionresistant application marking fitting machining and workholding operations in iti workshop, item cylinder bore gauge measuring range 20 160 mm type flexible extension type flexible rodcable length approx 5 m accuracy suitable for precision internal bore measurement material hardened steel alloy steel components reading compatible with dial indicator suitable measuring head accessories standard measuring anvilsextension accessories and carrying case application measurement of cylinder bores in automobilemechanical workshop, item cylinder liner sleeve types dry liner and wet liner fit types press fit and slide fit material cast iron alloy cast iron construction precision machined and honed surface smooth uniform and corrosionresistant application automobile engine cylinderliner demonstration and practical training quantity as per requirement representative samples of each type, item fuel injection pump dismantling tool kit type universal heavyduty material chrome vanadium alloy steel application dismantling and assembly of fuel injection pumps tools pullers holding tools spanners sockets and suitable dismantling accessories storage supplied in study tool case use suitable for automobile diesel engine practical training, item universal hand shear length 250 mm type manual hand operated blade material hardened highcarbon steel blades sharp durable and precisionground handle strong ergonomic and nonslip cutting capacity suitable for light sheet metal cloth and general workshop materials construction heavyduty and durable application fitting sheetmetal and iti workshop applications, item insulated screwdriver overall length 200 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item insulated screwdriver overall length 300 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item oil stone sharpening stone size 150x50x25 mm type combination fine grade sharpening stone material aluminium oxide silicon carbide shape rectangular surface uniform flat and smooth application sharpening and honing of cutting tools chisels blades and hand toolsuse suitable for iti fittingworkshop applications, item pipe flaring tool type manual hand operated application flaring of copper aluminium brake pipes tube sizes approx 3 16 mm material hardened steel alloy steel flare type single and double flare construction heavyduty precision machined handle ergonomic nonslip accessories flaring bar yoke and suitable adapters application automobile refrigeration practical training, item piston ring groove cleaner type manual hand operated application cleaning carbon deposits from piston ring grooves material hardened alloy steel cutter adjustable interchangeable cutting blades groove sizes suitable for common automobile engine piston grooves handle ergonomic nonslip grip construction heavyduty and durable accessories interchangeable bladescutters with storage case application automobile engine servicing and iti practical training, item radiator cut section down flow type automotive radiator sectionalcutaway model construction metal radiator core with tanks flow type downflow type coolant flows from upper tank to lower tank cut section transparentopen cut section to show internal construction and coolant flow path components visible upper tank tubes fins lower tank and coolant passages mounting sturdy standbase finish durable corrosionresistant application demonstration of radiator construction cooling system operation and coolant flow in iti automobilemechanic motor vehicle practical training, item radiator pressure cap type automotive radiator pressure cap material stainless steel brass with heatresistant rubber seal pressure rating suitable for standard automotive cooling systems function maintains specified coolingsystem pressure and controls coolant overflow valve pressure relief and vacuum valve seal heatresistant leakproof gasket construction durable and corrosionresistant application automobile cooling system practical training and demonstration
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
2.52L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Carbide Bar. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Carbide Bar sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Carbide Bar Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Carbide Bar, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Carbide Bar Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Carbide Bar Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Carbide Bar.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Carbide Bar depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Carbide Bar Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Carbide Bar bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Carbide Bar. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Carbide Bar, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Carbide Bar, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Carbide Bar?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Carbide Bar tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Carbide Bar?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Carbide Bar, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Carbide Bar is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All