sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

164Latest Capacitor module Tenders List

Latest Capacitor module Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Capacitor module tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Capacitor module tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Capacitor module Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Capacitor module tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Capacitor module Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Capacitor module Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Capacitor module Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Capacitor module tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Capacitor module Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Capacitor module sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Capacitor module tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Capacitor module tenders.

Is EMD mandatory for all Capacitor module tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Capacitor module work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Capacitor module tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Capacitor module Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17494740
Location : jabalpur , madhya pradesh
Source : GEM Tenders
NEW TENDER
corrigendum tender for proc of 200 x eoi items p1 155sw l x2tr 51122205 capacitor 2200 pf 20 630 vdc 4c2 , p1 155sw r z605 0527 103 protective cover , p1 155sw l x2tr 5101104 capacitor 10pf 100v 5c5 , p1 155sw r z6450011020 03 cable w11 , p1 155sw r z6450011020 02 cable w10 , p1 155sw l x2bscecc 90109 606 ic type 54 hc 74 bcm odm , p1 155sw l x2bs cecc 90104 107 ic type cd 4066 bf bcm odm , p1 155sw l z1bs cecc 50004 030 transistor type 2n2222a , p1 155sw l x2tr 5115208 capacitor 1470 pf , p1 155sw r z69390 000841 non metallic channel , p1 155sw r z65340 161387 bracket angle , p1 155sw r z66336929 washer , p1 155sw r z66336928 earthing screw , p1 155sw l z1bs cecc 16101 001 03 relay , p1 155sw l x2bs 9490 f7314 ic esd type 54 hc 76 guncos , p1 155sw r z65315 046683 pin straight headed , p1 155sw r z62081 01006 53 l software listing , p1 155sw r z65178370 cable 304 , p1 155sw r z65305 093997 screw cap hexagon head , p1 155sw r z64083237 cable 219 , p1 155sw r z62081 00220 02 4 matrix left hand , p1 155sw r z63054374 apparatus box , p1 155sw r z64084896 cable 215 , p1 155sw i z7baab 612308594 front lens , p1 155sw i z7baab 612308609 o ring kit , p1 155sw r z66388695 sign 3 , p1 155sw l z1tr 6317001 transistor bc 178 b v19 , p1 155sw l z1tr 6056201 diode in 5624 , p1 155sw l z1tr 6317701 transistor bc 177 b v16 , p1 155sw l x2tr 5347003 capacitor 47 uf 20 6v 5c11 , p1 155sw l z1tr 5322201 capacitor 22 uf 20 15v 11 c3 , p1 155sw l x2tr 5339001 capacitor 150 uf 20 15v 17 c1 , p1 155sw l x2tr 5347001 capacitor 47 uf 20 10v 14c4 , p1 155sw l x2tr 5533205 resistor 3.3k ohm 5 sk2 1 8w 4r4 , p1 155sw l x2tr 5301201 capacitor 100 uf 20 10v 17c3 , p1 155sw l x2tr 5247005 capacitor 0.47 uf 20 100v 21c2 , p1 155sw l x2tr 5233206 capacitor 3.3 uf 20 15v 4c5 , p1 155sw l x2tr 5201210 capacitor 0.1 uf 20 100v 21c1 , p1 155sw l x2tr 5122105 capacitor 220pf 20 160v 16c1 , p1 155sw l x2tr 5122111 capacitor 220 pf 20 100v 18c1 , p1 155sw l x2tr 5147201 capacitor 4.7uf 630v , p1 155sw l x2tr 5201105 capacitor 0.01 uf 20 400v 19c1 , p1 155sw l x2tr 5215003 capacitor 1.5 uf 630v 3c2 , p1 155sw l x2tr 5222008 capacitor 0.022 uf 20 400v 6c2 , p1 155sw l x2tr 5222107 capacitor 0.22 uf 20 100v 17c2 , p1 155sw l x2tr 5222108 capacitor 0.22 uf 10 100v 4c1 , p1 155sw l x2tr 5222207 capacitor 2.2 uf 100v , p1 155sw l x2tr 5618301 resistor 18kk ohm 5 1 8w , p1 155sw l x2tr 5556302 resistor 56k ohm 2 4r6 , p1 155sw l x2tr 5501501 resistor 100k ohm 5 1 8w 14rs , p1 155sw l x2tr 5502003 resistor 2.2 ohm 5 6w dale 14 r9 , p1 155sw l x2tr 5547003 capacitor 4.7 uf 20 6v , p1 155sw l x2tr 5533301 resistor 33k ohm 5 1 8w 17r2 , p1 155sw l x2tr 5533401 resistor 330k ohm 5 1 8w , p1 155sw l z1tr 5539101 resistor 390 ohm 5 1 8w 14r12 , p1 155sw l x2tr 5547101 resistor 470 ohm 5 1 8w 5r8 , p1 155sw l x2tr 5533004 resistor 330 ohm 5 0.33w 5r12 , p1 155sw l x2tr 5500005 resistor 0.5 ohm 15 6w dale 14 r13 , p1 155sw l x2tr 5501401 resistor 10k ohm 5 1 8w 22 r1 , p1 155sw l x2tr 5501417 resistor 10k ohm 5 sk2 1 8w 4r3 , p1 155sw l x2tr 5501510 resistor 100k ohm 5 sk2 1 8w 4r2 , p1 155sw l x2tr 5547201 resistor 4.7k ohm 5 1 8w 8r6 , p1 155sw l z1tr 5547213 resistor 4.7k ohm 5 sk2 1 8w 1r3 , p1 155sw l x2tr 5568201 resistor 6.8k ohm 5 1 8w 1r2 , p1 155sw l x2tr 5568301 resistor 56 k ohm 5 1 8w , p1 155sw l x2tr 5568401 resistor 680k ohm _ 5 1 8w , p1 155sw l x2tr 5575201 resistor 7.5k ohm _ 5 1 8w , p1 155sw l x2tr 5582001 resistor 82 ohm 5 1 8w 3r3 , p1 155sw l x2tr 5582101 resistor 820 ohm 5 1 8w 14r6 , p1 155sw l x2tr 5582201 resistor 8.2k ohm 5 1 8w 21r1 , p1 155sw l x2tr 5527201 resistor 2.7k ohm 5 1 8w 5r3 , p1 155sw l x2tr 5522501 resistor 2.2k ohm 1 8w , p1 155sw l x2tr 5556103 resistor 560 ohm 5 0.5w 17r4 , p1 155sw l x2tr 5556203 resistor 5.6k ohm 5 sk2 1 8w 1r5 , p1 155sw l x2tr 5533006 resistor 33 ohm 5 sk2 1 8w 4r5 , p1 155sw l x2tr 5527401 resistor 270 ohm 5 1 8w 1r7 , p1 155sw l x2tr 5512201 resistor 1.2 k ohm 5 1 8w 11r4 , p1 155sw l x2tr 5518301 resistor 18k ohm 5 1 8w 10 r5 , p1 155sw l x2tr 5512301 resistor 12k ohm 5 1 8w , p1 155sw l x2tr 5512302 resistor 12k ohm 5 sk2 1 8w 4r1 , p1 155sw l x2tr 5527002 resistor 27 ohm 5 sk2 1 8w 1r2 , p1 155sw l x2tr 5515001 resistor 15 ohm 5 1 8w 17r8 , p1 155sw l x2tr 5515201 resistor 1.5k ohm 5 1 8w 18r1 , p1 155sw l x2tr 5515205 resistor 1.5k ohm 5 1.25w 1r4 , p1 155sw l x2tr 5515301 resistor 15 kohm 5 1 8w , p1 155sw l x2tr 5518205 resistor 1.8k ohm 1r1 , p1 155sw l x2tr 5522001 resistor 22 ohm 5 1 8w 17 r1 , p1 155sw l x2tr 5527301 resistor 27k ohm 5 1 8w 17 r4 , p1 155sw l x2tr 5522102 resistor 220 ohm 5 0.5 w 17r5 , p1 155sw l x2tr 5522201 resistor 2.2k ohm 5 1 8w 15 r1 , p1 155sw l x2tr 5522301 resistor 22k ohm 5 1 8w , p1 155sw l x2tr 5522306 resistor 22k ohm 5 sk2 1 8w 3r2 , p1 155sw l x2tr 5515108 resistor 150 ohm 5 sk2 1 8w 5r1 , p1 155sw l x25178292 connector , p1 155sw l x25177086 trimm rheostat , p1 155sw l x26364498 distance , p1 155sw r z65340 159789 clip spring tension , p1 155sw r z65340 159784 clip spring tension , p1 155sw r z65340 161389 bracket double angle , p1 155sw r z65340 168305 bracket angle , p1 155sw r z65340 168313 plate mounting , p1 155sw r z65340 168892 hinge butt , p1 155sw r z65340 170547 frame access hole , p1 155sw r z65340 174984 clip , p1 155sw l x2ff 100 0016 103n connector , p1 155sw l x2phil pb 1049 06 01 connector , p1 155sw l x2tr 5539201 resistor 3.9k ohm 5 1 8w , p1 155sw r z65999 049591 printed circuit board , p1 155sw l x210340355 bushing x 21 517 16 , p1 155sw r z63120 105392 sleeve , p1 155sw r z610335571 mount x12 503 71 , p1 155sw r z65192127 cable processor gun , p1 155sw r z65999 049067 panel electronic circuit , p1 155sw l y121400 head set staff user with connector 10 7 , p1 155sw l x5mmo 3744 236 pk flourescent , p1 155sw r z62081 00415 01 1 panel electronic circuit , p1 155sw l z12081 00001 40 4 liquid crystal display matrix bcm odm , p1 155sw l z12bk5 10317 06 resistor network insulated 47k ohms , p1 155sw l z12bk 509503 semi conductor device diode type byw 54 , p1 155sw l z1510317 integrated circuit esd type hm 65161 9 , p1 155sw l z1de 52b 33h 25 s 223 ic prom 8k x 8 bit 250 ms i ms write , p1 155sw l x2fe 100 0017 102n connector socket electrical 3 way , p1 155sw r z65340 160870 cover plate access , p1 155sw r z62081 00386 40 1 carry case bcm odm , p1 155sw r z62081 00367 20 3 strip barrier , p1 155sw r z62081 00326 20 2 gasket , p1 155sw r z61166266 hand held calculator guncos , p1 155sw r z61166265 observers data module , p1 155sw r z61166264 battery computer module , p1 155sw r z62081 00408 10 0 flexible electronic circuit rf 1 , p1 155sw r z62081 00409 10 0 flexible electronic circuit main e case , p1 155sw r z65330 366536 gasket x21 504 22 , p1 155sw r z65330 366539 gasket , p1 155sw r z65330 366541 6359680 gasket , p1 155sw r z62510 008371 panel vehicular operation , p1 155sw r z62081 01007 01 0 personality module ballistics , p1 155sw r z62081 00420 01 0 power supply module , p1 155sw r z62081 00417 01 1 flexible electronic circuit , p1 155sw r z65365 176078 plug screwed 12 411 474 , p1 155sw l z12081 00142 40 4 inductor 1.5 mh , p1 155sw l z12081 00143 40 4 inductor 5 mh , p1 155sw r z65940 007855 terminal lug , p1 155sw r z63054031 18 lm 231 8 pin , p1 155sw r z63054031 17 ic lm 2917 8 pin , p1 155sw r z63054031 16 ic ca 3240 , p1 155sw r z63054031 15 ic ca 3140 , p1 155sw r z63054031 14 ic cd 4053 , p1 155sw r z63054031 13 ic lm 124 , p1 155sw r z63054031 12 ic hef 4538 bp , p1 155sw r z63054031 1 pcb d28power unit components , p1 155sw r z65975 054056 junction box , p1 155sw r z63054031 9 potentiometer 20 k , p1 155sw r z65970 041719 insulator plate , p1 155sw r z63054031 2 power transistor mj 11015 , p1 155sw r z65975 063907 1163432 junction box , p1 155sw r z61025 000740 care protecting , p1 155sw r z61025 000704 bar jumper x11 106 752 , p1 155sw l z12081 00212 40 4 transformer , p1 155sw l z12222 123 13439 capacitor electrolytic 100uf 20v , p1 155sw l x22081, 155 mm fh bofors
Agency / Dept :
indian army
Due Date :
Oct 01, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17494751
Location : thanesar , haryana
Source : GEM Tenders
NEW TENDER
tender for electrical maintenance items - 1by2 machine screw , 3by4 machine screw , 1.5 machine screw , 3by4 steel screw , clamp meter generic make with range , 1 phase electric energy lcd digital , 3 phase direct measuring energy meter to , current transformer ratio 1600 5a ,ct , soldering gun with solder , 1 pvc conduit pipe in heacy duty , 1 gi clamp , 1 pvc tee , 2 sq.ft.x 4 sq ft. bakelight sheet , 1 flexible pipe , pcb board of 1200mm 1400 mm ceiling fan , 2.5 mfd capacitor oil type , 3.15 mfd capacitor oil type , 2 core x 10 sq mm pvc aluminium cable , 4 core x 16 sq mm pvc aluminium armoured cable , 1 phase electric energy lcd digital meter 0-4 , mastic tape , 8 into 5 wooden box , 10 into 5 wooden box , 8into 5 bakelite sheet , 10into5 bakelite sheet , multipurpose pu foam of 700-800 ml capacity , 10 sq mm ring type copper thimble , 25 sq mm ring type copper thimble , 16 sq mm ring type aluminum thimble , 35 sq mm ring type aluminum thimble , 120 sq mm ring type aluminum thimble , 150 sq mm inline type aluminum thimble , 185 sq mm ring type aluminum thimble , 240 sq mm ring type aluminum thimble , 120 sq mm inline type aluminum thimble , 185 sq mm inline type aluminum thimble , heavy duty foldable step ladder-5 step , m-seal , 6 mm dia length 250-300mm drill bit , 8 mm pvc cable clip , 10 mm pvc cable clip , 12 mm pvc cable clip , grease , 3.5 core x 120 sq mm pvc aluminium armoured , cordless-remote bell different sound , 3.5 x 240 sq mm lt cables straight inlin , 3.5 x 300 sq mm lt cables straight inline , pvc round sheet , 2 module sheet with 6 amp 2 switches set , 3 module sheet with 6 amp 3 switches set , 3 module sheet with 16 amp 1 switches,1 s , 4 module sheet with 6 amp 4 switches , 8 module sheet with 16 amp 2 switches, , 8 module sheet with 6 amp 1 switches,3 , 8 module sheet with 6 amp 4 switches, , 12 module sheet with 6 amp 6 switche , 18 module sheet with 6 amp 10 switche , moduler blank plate for above set , aluminium body spot focus light with , decorative wall hanging light with lamp , air conditioner outdoor cover, as per buyer added atc document
Agency / Dept :
national institute of technology NIT
Due Date :
Oct 16, 2026 (17 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17494851
Location : jamnagar , gujarat
Source : GEM Tenders
NEW TENDER
tender for terminal ends for aluminium conductors of insulated cables (compression cable lugs) conforming to is 8309 (q3) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , self ballasted led lamps (led bulb) conforming to is 16102 (part 2) (v3) (q2) , led garden light (v2) (q2) , astronomical time switch based on lux level , bell ding dong call bell , bell push 6 amp piano type , cable lugs alumn 120 sqmm , cable lugs alumn 185 sqmm , cable lugs alumn 35 sqmm , cable lugs alumn 50 sqmm , cable lugs alumn 95 sqmm , cable pvc service al 2 core x 10 sqmm , cable pvc service al 2 core x 4 sqmm , cable pvc service al 2 core x 6 sqmm , capacitor 2 point 5 mfd , led batten 10w , led batten 20w , led street light 45w , led street light 60 w , led street light 70w , mcb sp 10 amps , mcb sp 16 amps , mcb sp 20 amps , mcb sp 25 amps , mcb sp 6 amps , mcb spn 20 amps , mcb 4 pole 40 amp , mccb 100 amps 4 pole 25 ka , mccb 200 amps 35 ka 4 pole , mccb 250 amps 35 ka 4 pole , modular switch 10 a one module , plug top 3 pin 16 amps , pvc tape adhesive 25 mm , switch piano type 16 amp one way , switch piano type 6 amp one way , switch piano type 6 amp two way , switch socket combination piano type 16 amp 2 in 1 , switch socket combination piano type 6 amp , pvc cable pvc single core 1 point 5 sqmm copper conductor , pvc cable aluminium service 2 core 6 sqmm , pvc flexible copper cable single core 2 point 5 sqmm , tape insulation 20mm x 25 mtr , xlpe cable of size 3 point 5 x 50 sqmm , led flood light 90 w , led flood light 250 w , led flood light 120 w , led flood light 150 w , led flood light 50 w , led flood light 60 w , led slim type batten tube light fitting with 5 watt , fan regulator electronic socket type , ht 11 kv heat shrink straight through jointing kit for cable 95 sqmm , busbar aluminium 4 pole 200 amps , cable copper 25 sqmm single core , cable copper 35 sqmm single core , cable copper 50 sqmm single core , lugs copper 25 sqmm , lugs copper 35 sqmm , lugs copper 50 sqmm , lugs copper 70 sqmm , flat copper cable 10 sqmm 3 core for submerciable , flat copper cable 6 sqmm 3 core for submerciable , fuse ht copper do 20 amp , fuse ht copper do 30 amp , mcb 4 pole 63 amp c series , fuse ht copper do 40 amp , fuse ht copper do 60 amp , hrc fuse 100 amp with copper lever , hrc fuse 200 amp with copper lever , ht cable end joint heat shrink outdoor of size 120 sqmm , ht cable end joint heat shrink outdoor of size 95 sqmm , ht 11 kv heat shrink straight through jointing kit for cable 120 sqmm , led bollard light 12 watt , led lamp 7 watt , led recessed luminer light 16 watt , mcb sp 32 amp c series , led recessed mounted panel light 18 watt , led street light 90w , power contactor 4 pole 70 amp , plug top 3 pin 6 amp , pvc insulated frlsh single core copper conductor 4 sqmm size , socket 16 amp flush type , socket 6 amp flush type , ht fuse element 11 kv voltage grade 10 amp , pvc tape roll 40 mm , on load change over switch 4 pole 40 amp with encloser , on load change over switch 4 pole 630 amp with encloser , led street light 35 watt , mccb 400 amps 50 ka 4 pole , cable lugs aluminium 70 sqmm , cable pvc cord flexible 2 core 2 point 5 sqmm copper , cable pvc cord flexible 2 core 0 point 75 sqmm copper , cable pvc cord flexible 2 core 1 point 5 sqmm copper , flexible copper rubber wire 2 point 5 sqmm 10 core , fan regulator step type two module , led street light driver 70 watt , mcb sp 40 amp c series, demand of stores, astronomical time switch based on lux level, bell ding dong call bell, bell push 6 amp piano type, cable lugs alumn 120 sqmm, cable lugs alumn 185 sqmm, cable lugs alumn 35 sqmm, cable lugs alumn 50 sqmm, cable lugs alumn 95 sqmm, cable pvc service al 2 core x 10 sqmm, cable pvc service al 2 core x 4 sqmm, cable pvc service al 2 core x 6 sqmm, capacitor 2 point 5 mfd, led batten 10w, led batten 20w, led street light 45w, led street light 60 w, led street light 70w, mcb sp 10 amps, mcb sp 16 amps, mcb sp 20 amps, mcb sp 25 amps, mcb sp 6 amps, mcb spn 20 amps, mcb 4 pole 40 amp, mccb 100 amps 4 pole 25 ka, mccb 200 amps 35 ka 4 pole, mccb 250 amps 35 ka 4 pole, modular switch 10 a one module, plug top 3 pin 16 amps, pvc tape adhesive 25 mm, switch piano type 16 amp one way, switch piano type 6 amp one way, switch piano type 6 amp two way, switch socket combination piano type 16 amp 2 in 1, switch socket combination piano type 6 amp, pvc cable pvc single core 1 point 5 sqmm copper conductor, pvc cable aluminium service 2 core 6 sqmm, pvc flexible copper cable single core 2 point 5 sqmm, tape insulation 20mm x 25 mtr, xlpe cable of size 3 point 5 x 50 sqmm, led flood light 90 w, led flood light 250 w, led flood light 120 w, led flood light 150 w, led flood light 50 w, led flood light 60 w, led slim type batten tube light fitting with 5 watt, fan regulator electronic socket type, ht 11 kv heat shrink straight through jointing kit for cable 95 sqmm, busbar aluminium 4 pole 200 amps, cable copper 25 sqmm single core, cable copper 35 sqmm single core, cable copper 50 sqmm single core, lugs copper 25 sqmm, lugs copper 35 sqmm, lugs copper 50 sqmm, lugs copper 70 sqmm, flat copper cable 10 sqmm 3 core for submerciable, flat copper cable 6 sqmm 3 core for submerciable, fuse ht copper do 20 amp, fuse ht copper do 30 amp, mcb 4 pole 63 amp c series, fuse ht copper do 40 amp, fuse ht copper do 60 amp, hrc fuse 100 amp with copper lever, hrc fuse 200 amp with copper lever, ht cable end joint heat shrink outdoor of size 120 sqmm, ht cable end joint heat shrink outdoor of size 95 sqmm, ht 11 kv heat shrink straight through jointing kit for cable 120 sqmm, led bollard light 12 watt, led lamp 7 watt, led recessed luminer light 16 watt, mcb sp 32 amp c series, led recessed mounted panel light 18 watt, led street light 90w, power contactor 4 pole 70 amp, plug top 3 pin 6 amp, pvc insulated frlsh single core copper conductor 4 sqmm size, socket 16 amp flush type, socket 6 amp flush type, ht fuse element 11 kv voltage grade 10 amp, pvc tape roll 40 mm, on load change over switch 4 pole 40 amp with encloser, on load change over switch 4 pole 630 amp with encloser, led street light 35 watt, mccb 400 amps 50 ka 4 pole, cable lugs aluminium 70 sqmm, cable pvc cord flexible 2 core 2 point 5 sqmm copper, cable pvc cord flexible 2 core 0 point 75 sqmm copper, cable pvc cord flexible 2 core 1 point 5 sqmm copper, flexible copper rubber wire 2 point 5 sqmm 10 core, fan regulator step type two module, led street light driver 70 watt, mcb sp 40 amp c series
Agency / Dept :
indian army
Due Date :
Oct 05, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17496310
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
NEW TENDER
corrigendum tender for 351055500083, pcb,3ph cnctr card,6000016969,690036001 , 351055500087, pcb,3ph rc card,6000016898,hbl,6900003 , 351055500092, pcb,dc dc cnvrtr card,6000016984,6900085 , 351055500174, pcb,dc dc cnvrtr card,6000016985,6900085 , 351055500101, pcb,ld shrng crd,6000017086,hbl,6900065 , 351055500186, pcb,ld shrngcrd,6000038978,hbl,690006502 , 351055500173, pcb,ma card,aux,6000016944,hbl,690013602 , 351055200358, connector card,6901918,hbl , 351055200370, analog card,110v,6900365,hbl , 351055200371, adaptor card,6900366,hbl , 351055500103, pcb,mains fail card,6000017093,6900087 , 351055500097, pcb,fs fail card,6000017021,hbl,6900123 , 351055500002, capacitor,10000mfd,250vdc,alcon,btrychrg , 351055500001, capacitor,4700mfd,450vdc,alcon,btry chrg , 351055500144, thyristor,cpsl,1000019164,hbl,btry chrgr , 351055500014, thyristor,cpsl,1000019055,hbl,btry chrgr , 351055500075, thyristor,cpsl,1000019067,hbl,btry chrgr , 351055500169, module,thy-thy,1000019211,hbl,btry chrgr , 351055500016, diode,cpsl,1000006416,hbl,btry chrgr,hbl , 351055500043, diode,cpsl,1000006427,hbl,btry chrgr,hbl , 351055500080, diode,cpsl,1000006399,hbl,btry chrgr,hbl, hpcl vr supply of hbl battery charger ss 82 and 83, please refer tender
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Oct 01, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17498769
Location : bongaigaon , assam
Source : GEM Tenders
NEW TENDER
tender for axial,pn181002500601,vertiv , hall current sensor,pn294730030001 , rectfier thyristor 250a,pn255902501425 , fuse semi 160a,660v,pn284701606000 , fuse,pn 284702006000,vertiv , fuse 350a,emerson ups,pn284703506000 , ct 1ph10001a,emerson ,pn294901002010 , thyristor 900a rms, pn 255905701620 , igbt,dual module,heat sink,300a 1200v , kit flat cable assembly 2560kva 1ph ups , pcahv interface,pn10p208122007 , pcalow volt interface,pn10p212123003 , pca dic card,71002821pn000000cl5198 , pca id card,71002995,pn000000cl5199 , pcbadigital signal boardpn106204112024 , pcarectifier scr firingpn10p218122002 , pca cdcs, pn10p203122005 , pca igbt driver ,pn10p209122003 , igbt interface card, pn100209112009 , pcba display board,pn106204112025 , pca mov cad for 1ph,pn000000bp5110 , pca paracon,pn10p216122001 , pca cib interface pcb,pn106203112001 , resistor pcb for rc filter circuit , capacitor,pn0000000c5014,vertiv , ac capacitor,pn0000000c5027 , dc capacitor,pn 0000000c5070 , capacitor,pn231010928060,vertiv , diode scr, pn0000000d5016 , thyristor,heatsink mount,pn000000th5016 , igbt, dual module, pn0000000q5050 , fan,pn0000000e5009,vertiv , fuse, semiconductor,pn284716006001 , fuse,pn0000000fo161,makevertiv , fuse,glass cartridge,1 amp,pn0000f0188 , fuse,glass cartridge,2 amp,pn0000f0189 , fuse,hrc,500a,gec , hall effect sensor,pn000000hd5081 , hall device,pn000000hd5082 , temperature sensor,pn 323477120702 , thermal switch,pn000000sw5142 , pcacdcs,vertiv,pn106203122002,20kva , pcaigbt, vertiv,pn106209112000,20kva , pcahigh frqcy cont card,pn10p208122006 , pcacom,vertiv,pn106203111000,20kva , pcadvfx, vertiv,pn 106204112032 20kva , pcaregister pcb,106218112004,20kva , capacitor 10uf, 450 vac,0000000c0338 , ac capacitor pn00000000c0347 , diode scr95a,pn0000000d0257,vertiv , thyristr,heatsink montd,pn0000000th041 , igbt,dual module,pn0000000q5059,emerso , fus,std mont,catg bld,pn0000000f0103 , fuse,pn0000000f0194,vertiv , fuse,pn0000000j0143,vertiv , fuse set,10kva,110v ac,pn 284701006000 , fuse 400a,emerson ups,pn284704006600 , glass fuse4 mm dia20 mm l250 v10 a , hall,effect sensor,pn000000hd5072 , hall effect sensor,000000hd5080,emerson , temperature sensor,pn261702006000 , pcamov,vertiv,pn106213112000,3kva , capacitor 4700 f 350vdc , capacitor,filter,2200mfd,450v dc , did scr,mdul sink mount,pn0000000d5078 , thyristr,hetsink mountd,pn0000000th079 , fan,axial,6inch,pn0000000e5025,emerson , fuse,glass cartridge,4 amp,pn0000f0191 , hall effect sensor,pn000000hd5071 , cntrl trnsfrmr, 415230v, 92va , auto tf, 0230v415v, 1a , auto tf, 0110v230v, 2a , ct,window,1 core,10002a,16va,cl10 , ct,window,1 core,40002a,32va,cl10 , ct,window,1 core,5002a,10va,cl10 , ct,window,1 core,30002a,32va,cl10 , edisplay,pn000000bp5182,vertiv , pcacan op, spares of ms vertiv make ups, as per rfq
Agency / Dept :
indian oil corporation limited IOCL
Due Date :
Oct 03, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17498962
Location : kollam , kerala
Source : GEM Tenders
NEW TENDER
tender for quad copter 450 to 500mm class frame kit , brushless motor , esc 40a, 4s , flight controller , propellers 10 by 4.5 inch set , power distribution board, high current , power module , shock absorber set , lipo battery, 4s, 5200mah , radio transmitter and receiver,10 channel , gps and compass module , telemetry kit , wiring, connectors set , lipo battery charger, 4s, balance or multi-port, 450 to 500 mm class quad copter development and assembly kit, carbon fibre or composite quadcopter frame, 450 to 500mm wheelbase, fixed or foldable arm design, integrated fc or pdb mounting deck, frame weight less than or equal to 450g, payload capacity greater than or equal 800 gm., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal 20a, max thrust greater than or equal 1.2kg with 1045 propeller., blheli-compatible esc, continuous current rating 40a, input 4s lipo., 32-bit arm cortex-m7 or better processor, open-source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 10 by 4.5 inch propellers, factory-balanced cw/ccw pair per set, glass-fibre-reinforced nylon construction, adapter included., high current pdb, continuous rating greater than or equal 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input 4s to 6s lipo, regulated 5.3v/3a output to fc, analogue voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 450mm to 500 mm class frame., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., gnss module with integrated compass, update rate greater than or equal to 5hz, uart interface, compatible with listed flight controllers., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 4s to 6s lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 5200mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 13, 2026 (14 days left)
Tender Value :
2L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17498987
Location : kollam , kerala
Source : GEM Tenders
NEW TENDER
tender for brushless motors , esc 40a, 4s , esc 40a, 6s , propellers 1355, carbon fibre set , propellers, carbon fibre ,15 inch set , propellers 1045, self locking , set , lipo battery, 6s, 8000mah , lipo battery, 6s, 10000mah , lipo battery, 4s, 5200mah , power distribution board ,high current 6s with bec , power distribution board , high current 4s with bec , frame spare parts one set per frame class , arms, landing gear, plates for three class frames ie 450 to 500 mm, 550 mm and 650 to 700 mm class , fpv camera and cable spare set , battery straps and safety accessories , propeller mounts and adapters , spare gps mounts slash holders , packaging and storage boxes, drone zip kits and consumables, brushless dc outrunner motor, kv rating 350 to 410kv, continuous current handling greater than or equal to 25a, max thrust greater than or equal to 1.5kg on 6s lipo with 15inch propeller, unit weight 110g to 150g, brushless dc outrunner motor,kv rating 300 to 400kv suitable for 6s operation and 550 mm class frames, continuous current greater than or equal to 25a, max thrust greater than or equal to 1.5kg with 13 by 5.5 inch propeller, includes mount and propeller adapter, unit weight less than or equal to 110g., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal to 20a, max thrust greater than or equal to 1.2kg with 1045 propeller., blheli compatible esc, continuous current rating 40a, input 4s lipo with adequate thermal protection., blheli compatible esc, continuous current rating 40a, input 6s lipo with adequate thermal protection, 13 x 5.5 inch carbon fibre propellers, factory balanced cw/ccw pair., 15 x 5.5 inch carbon fibre reinforced propellers, self locking / quick release type, factory balanced cw/ccw pair per set., 10 x 4.5 inch propellers, factory balanced cw/ccw pair per set, glass fibre reinforced nylon construction ,adapter included., lithium polymer battery, 6s ,22.2v nominal, 25.2v fully charged, capacity 8000mah, minimum continuous discharge rate 25c, equipped with an amass xt60 main power connector with balance connector, integral overcharge/ discharge protection., lipo battery, 6s ,22.2v nominal, capacity 10000mah, minimum continuous discharge rate 20c, xt60 connector with balance lead, suitable for extended training flight duration., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., pdb rated for 6s, 25.2v input, continuous current handling greater than or equal to 100a, integrated 5v/12v bec outputs, xt60 input connector., high current pdb, continuous rating greater than or equal to 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., oem compatible spare parts set comprising replacement arms, landing gear legs and top/bottom mounting plates for carbon fibre/glass reinforced composite quadcopter frames , 450 to 700mm class, matching the material specification of the parent frame kits., analog/digital fpv camera, minimum 600tvl , analog or hd equivalent, wide dynamic range, less than or equal to 170 degrees fov lens, supplied with power/video cable set and mounting bracket compatible with 650 to 700mm, 450 to 500mm and 550 mm class frames., reusable rubberised/silicone battery securing straps , assorted lengths, minimum breaking load greater than or equal to 20kg, lipo safe fireproof charging/storage bags, battery voltage checker tags., precision machined propeller mount adapters compatible with 4mm/5mm motor shafts, self locking/quick release type, suitable for 10 to 17 inch propeller range., vibration damped gps/compass mast mount, compatible with standard gps module footprint , m8n/m9n series, adjustable height, supplied with mounting hardware., rugged hard shell equipment case with customisable foam insert, ip rated dust/water resistance, suitable for safe storage and transport of drone kits, spares and accessories.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 13, 2026 (14 days left)
Tender Value :
1.5L
View Documents
T18 Ref No : 17465609
Location : kanpur , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for capacitor module 4500 hv (cm 4500 hv) , part no. a06b-6259-h050. make: fanuc , power failure backup module 24 hv (pfb-2) , part no. a06b-6259-h010. make: fanuc.
Agency / Dept :
advanced weapons and equipment india limited AWEIL
Due Date :
Oct 05, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17314788
Location : uchchhal , gujarat
Source : GEM Tenders
LIVE TENDER
tender for raw material abet liquid , active and passive component kit , alpha cypermethrine , aluminium filler rod , amplifire circuit , angle holder 6a , baking powder , batten holder , belt roll , bikar , bleech , brass filler road , brown paper sheet , bti poweder , c.i electrode , cap screw , capacitor , capping cross , casing capping elbow , casing capping 4 way , cassing caping , cheese head screw , chlorine powder , chlorine tablet , chloroquine tab , chloroscope , ci flat , cleansing milk , cmos cell , colllar with collar stand , metal conduite pipe , control fuse , copper lug , copper tube , cotton , metal conduit coupling , cuff set , dowel pin , earth connecting plate for energy meter , elecgtromganetic relay , electronic sequential control circuit- , empier sleee , eye lashes and eye lashes glue , eyebrow thread , ferul connector aluminium , fiber wadge 3 to 4 inches , fixed resistance wire wound , flameproof double compression cable gland , foundation for face , g.i band , g.i funnel with wiremesh , g.i nut , g.i pipe , g.i sheet , g.i washer , g.i wire , g.i.pipe , gas lighter , gi saddle , glycerin , hair color , hair donut bun , hair flower brooch , hair serum , hand needle , heatsink paste , high lights blonder powder , hook , hook up wire , ic , inductor , varnish , internal threaded coupling , killing powder , lamp , lamp holder with cap , lamp with holder , latheroid paper , led , led chaser , led lamp holder with pvc cape , loose powder , lotion , machine oil , machine needle , magnetic contector , make up fixer , make up sponge set , male female connector , mask , maskara , mehndi oil , metal conduite 4 way , metal conduite l , mild steel hexagonalbar , mild steel angle , mild steel c channel , mild steel channel , mild steel electrode , mild steel flat , mild steel pipe , mild steel rivet , mild steel round bar , mild steel square bar , nail art sticker , nail polish , nail polish remover , nail top coat and base coat , fabric for kids frock , nichrome wire , nomex paper , nylon bobbin , on off push button switch , ph test stripe , paper canvas , pendant holder , petrolium jelly , plastic button for shirt , plastick transperent sheet , pot , pvc 4 way connector , pvc insulated aluminium armed cable , pvc insulated aluminium armoured cable , pvc insulated copper wire , pvc sleeve , rainbow wire for soldering , reducing socket , rivet , rose water , sand , screw , mild steel sheet , shirt placket roll , silver brazing rod , single compression cable gland , ss electrode , ss filler rod , ss sheet , sterilise glass bottel , syringe , tailors chalk , terminal block , thermal relay , thinner , thoriated tungston electrod , timer , toggle switch , tonner , touch based smart switch , transformer , transister , two plate celling rose , usb to lan converter , variable resistance wire wound , vulcanizing paste , vulcanizing patches , wax cream , wax strip , wax thread , wd40 , weatherproof double compression cable gland , winding cotton thread , wire nail , wood screw , zerconated tungstun electrod, na, dia 3 mm, dia 1.6 (al 95% silicon 5% ), 6a 240v, 6a, 1.15 inch width for trouser, 50 ml, 100 ml, 150 ml eliglas polypropylene (pp) low-form laboratory beaker, for face, dia 1.6 mm, 27x40 inch, 40 gsm, vectokill bti a.s. serotype h-14 - defence, dia 3.15 mm, mild steel m6 x 20mm, 5,8,100,1000,2.25 micro farade 240v each, 36 micro farade, 250 micro farade 240v, 1/2 inch, cdl 7500 chlorine dioxide for treating, 150,300,450,600 mg each, religlasr, 150x50x6 mm, 3.3v 2032, ready size cut, (14 size) for male shirt, 19mm diameter, 500ma, 4 sq. mm ring type, 6 sq. mm ring type, 200 a with 19mm diameter well, diameter 10 mm, roll, 19mm dia, ready size cut,10 inch length, for male shirt, ms 6mm diameter and 20mm length, 150x150x1 mm copper, as per standard, 4 channel, 1mm, for eye, 50 sq mm, strips/sheets, 8 kilo ohm, 1 w, flameproof, medium, light,dark, 12.7mm diameter, 19 mm, 17 mm diameter, 38 mm diameter, 12.7 mm diameter, 24swg, 40 mm diameter 20 mm hole, 8 swg, 25mm diameter,1mm wall thickness, for skin care 200 ml., brown, black, set of five, for hair, medium size for hand embroidery, 10 and 20 gram, steel,for ladies blouse, red and black, 7812, 250 watt (mercury choke), 100w, 200w, 40w, 3v led, 12v/6w(d.c), 12v/21w(d.c), 12v/35w(d.c), 5mm,3v (blue,red,yellow,green), 4 channel 220v ac, 5 mm (plastic clip cover), 200 ml., white oil for sewing machine, dbx1,snls machine-full shuttle, 16a,440v, 2.5 sq.mm, naavik surgical face mask class 3, for mehndi, l and t 19mm diameter each, 18 mm a/f (across the flat), 35x35x5 mm, 75x5x40 mm, 25x25x3 mm, dia 4 mm, dia3.15 mm, 100x2 mm, 50x2 mm, dia 25x3 mm, dia 50x3 mm, dia 50x6 mm, 3 mm, 9mm diameter, 45mm diameter, 40mm diameter, 32mm diameter, 35mm diameter, 25mm diameter, 25x25 mm, water transfer, for nail, plain fabric(net /satin/tissue ), 22 swg, 7 mills, non woven (interlining-nonwoven)), off white, 1 kilo ohm, 3 core 50 sqmm, 3core 35 sqmm, 3.2, 7.2, 1.18, 1 mm, 2mm, 3mm each, 10 core, 38 to 19mm, flat head, 100 ml., 12/5 mm, 18 gauge 6x4 feet, 1 inch width, dia1.6 mm, carecroft sterile hypodermic syringe with needle single use 2 ml carecroftr (carecroft syringes 2ml with needle), indian soil,multi colour, 6 ways, 4-6 a 440v three phase, dia 2.4mm ( aws- ewth-2 ), 0 to 60 second, 2- way, 6 a, 240 v, 3 module, 230 v/6-0-6 v, 230/12-0-12 v, bc-547, usb to nic, 14 kilo ohm , 1 w, for tyre puncture (75 ml tube), for tyre puncture (mini round 20 to 30 pieces), body, for winding, contact cleaner 400 ml, weatherproof, 1 inch, 25/7 mm, 25/5 mm, dia 2.4mm (aws- ewzr-1)
Agency / Dept :
department of employment and training DET
Due Date :
Sep 29, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17314793
Location : gandevi , gujarat
Source : GEM Tenders
LIVE TENDER
tender for electronic and misc items boq 1 alluminum roundbar dia 60mm , copper tube dia 1 by 2 inch , m s round bar dia 25mm , m s round bar dia 32mm , m s round bar dia 45mm , 2 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 red yellow black blue , 1 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 ,red,yellow,blue,black,green , acsr conductor , soldering wire 80 colon 20 1 no equal to 250grm , steel wire brush 4 raw , aluminium lugs ring type 1 point 5 sq mm , aluminium lugs u type 2 point 5 sq mm , copper lugs 35sqmm , copper lugs pin type 2point5 sq mm , copper lugs pin type 1 point 5 sqmm , copper lugs pin type 1 sq mm , copper lugs ring type 1 point 5 sq mm , copper lugs ring type 1sq mm , copper lugs ring type 2 point 5 sq mm , copper lugs u type fork type 1 point 5 sq mm , copper lugs u type fork type 1 sq mm , copper lugs y type 1 point 5 sq mm , copper lugs y type 2 point 5 sq mm , dowells copper lugs , flexible cable 2c x 1 sq mm copper round type , pvc bobin cross area 1inch x1inch , pvc gang box 3 way , pvc gang box 4 way , pvc relay module with base dc2411p , bleaching cream activator oxy life 300 gm , methyl alcohol ch3oh , industrial single needle lock stitch machine belt , fiber buttons four hole size 20mm black and white , capacitor 102pf , capacitor 47mfd 16v , carbon resistor 10 k,1 by 4 w , carbon resistor 100 ohm 1by 4 w , carbon resistor 100e, 1 by 4 watt , carbon resistor 150k, 1 by 4w , carbon resistor 180e 1 by 4 w , carbon resistor 2 k, 1 by 2 watt , carbon resistor 2k2 1 by 4 w , carbon resistor 330e 1 by 4 w , carbon resistor 3k3e, 1 by 4 w , carbon resistor 430ohm, 1 by 2 watt , carbon resistor 470e k 1 by 4 w , carbon resistor 51k 1 by 4 w , carbon resistor 82 ohm,1 by 4w , carbon resistor 820e 1 by 4 w , carbon resistor3k9 1 by 4 w , ceramic capacitor 100pfd , crocodile pin pair 16amp red and black , di soldering wick 2 point 5mm x 1 mtr long copper , electrolyte capacitor 10 micro farad 16v , electrolyte capacitor 100 micro farad 10v , electrolyte capacitor 1000 micro farad 16v , electrolyte capacitor 10microfarade,25 v , electrolyte capacitor 2 point 2 microfarade,63 v , electrolyte capacitor 2 point 5 mfd, 230 volt is 1709 ac , electrolyte capacitor 22 mfd 25 v , electrolyte capacitor 4 point 7 microfarade,25 v , electrolyte capacitor 47mfd,25 v , female to female jumper wires , flame sensor , gang capacitor 135pf to 500pf , hrc fuse , ic socket 8pin , ldr , lithium ion-li- ioncoin cell battery , male to female jumper wires , male to male jumper wires , metal film resistor 100ohm 1w , mq 3 gas sensor , paper capacitor , plastic film capacitor 0 point 0100 mfd , resistor 470 ohm , 1 by 2 watt , resistor 10kohm , resistor 47 ohm , 1 by 2 watt , resistor 560e , 1 by 4 watt , resistors 10,20,30,40,50,60 ohm , 1watt , zener diode 15v , zener diode 27v , zener diode 5 point 1v , zener diode 8 point 2v , zener diode 9 point 1v , touch sensor , mscc filler rod dia 1point6 mm , ss electrode 3point15 mm , modular pvc board 10 inch x 12 inch , wooden board 10 inch x 12 inch , refrigerant r600 450 grm tin , solid carbide end mill cutter dia 06x100 mm long , threading insert 16ermag60cv15 for mild steel , parting insert tdc-3 mm for mild steel , external turning insert vgbt 120408 , insert for u drill spmg060208 , machine history sheet f trg 26, alluminum roundbar dia 60mm, copper tube dia 1 by 2 inch, m s round bar dia 25mm, m s round bar dia 32mm, m s round bar dia 45mm, 2 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 red yellow black blue, 1 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 ,red,yellow,blue,black,green, acsr conductor, soldering wire 80 colon 20 1 no equal to 250grm, steel wire brush 4 raw, aluminium lugs ring type 1 point 5 sq mm, aluminium lugs u type 2 point 5 sq mm, copper lugs 35sqmm, copper lugs pin type 2point5 sq mm, copper lugs pin type 1 point 5 sqmm, copper lugs pin type 1 sq mm, copper lugs ring type 1 point 5 sq mm, copper lugs ring type 1sq mm, copper lugs ring type 2 point 5 sq mm, copper lugs u type fork type 1 point 5 sq mm, copper lugs u type fork type 1 sq mm, copper lugs y type 1 point 5 sq mm, copper lugs y type 2 point 5 sq mm, dowells copper lugs, flexible cable 2c x 1 sq mm copper round type, pvc bobin cross area 1inch x1inch, pvc gang box 3 way, pvc gang box 4 way, pvc relay module with base dc2411p, bleaching cream activator oxy life 300 gm, methyl alcohol ch3oh, industrial single needle lock stitch machine belt, fiber buttons four hole size 20mm black and white, capacitor 102pf, capacitor 47mfd 16v, carbon resistor 10 k,1 by 4 w, carbon resistor 100 ohm 1by 4 w, carbon resistor 100e, 1 by 4 watt, carbon resistor 150k, 1 by 4w, carbon resistor 180e 1 by 4 w, carbon resistor 2 k, 1 by 2 watt, carbon resistor 2k2 1 by 4 w, carbon resistor 330e 1 by 4 w, carbon resistor 3k3e, 1 by 4 w, carbon resistor 430ohm, 1 by 2 watt, carbon resistor 470e k 1 by 4 w, carbon resistor 51k 1 by 4 w, carbon resistor 82 ohm,1 by 4w, carbon resistor 820e 1 by 4 w, carbon resistor3k9 1 by 4 w, ceramic capacitor 100pfd, crocodile pin pair 16amp red and black, di soldering wick 2 point 5mm x 1 mtr long copper, electrolyte capacitor 10 micro farad 16v, electrolyte capacitor 100 micro farad 10v, electrolyte capacitor 1000 micro farad 16v, electrolyte capacitor 10microfarade,25 v, electrolyte capacitor 2 point 2 microfarade,63 v, electrolyte capacitor 2 point 5 mfd, 230 volt is 1709 ac, electrolyte capacitor 22 mfd 25 v, electrolyte capacitor 4 point 7 microfarade,25 v, electrolyte capacitor 47mfd,25 v, female to female jumper wires, flame sensor, gang capacitor 135pf to 500pf, hrc fuse, ic socket 8pin, ldr, lithium ion-li-ioncoin cell battery, male to female jumper wires, male to male jumper wires, metal film resistor 100ohm 1w, mq 3 gas sensor, paper capacitor, plastic film capacitor 0 point 0100 mfd, resistor 470 ohm , 1 by 2 watt, resistor 10kohm, resistor 47 ohm , 1 by 2 watt, resistor 560e , 1 by 4 watt, resistors 10,20,30,40,50,60 ohm , 1watt, zener diode 15v, zener diode 27v, zener diode 5 point 1v, zener diode 8 point 2v, zener diode 9 point 1v, touch sensor, mscc filler rod dia 1point6 mm, ss electrode 3point15 mm, modular pvc board 10 inch x 12 inch, wooden board 10 inch x 12 inch, refrigerant r600 450 grm tin, solid carbide end mill cutter dia 06x100 mm long, threading insert 16ermag60cv15 for mild steel, parting insert tdc-3 mm for mild steel, external turning insert vgbt 120408, insert for u drill spmg060208, machine history sheet f trg 26 for industrial training institute, general maintenance register f trg 28 for industrial training institute
Agency / Dept :
department of employment and training DET
Due Date :
Sep 29, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Capacitor Module. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Capacitor Module sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Capacitor Module Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Capacitor Module, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Capacitor Module Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Capacitor Module Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Capacitor Module.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Capacitor Module depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Capacitor Module Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Capacitor Module bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Capacitor Module. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Capacitor Module, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Capacitor Module, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Capacitor Module?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Capacitor Module tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Capacitor Module?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Capacitor Module, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Capacitor Module is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All