sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

29Latest Bevel square Tenders List

Latest Bevel square Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Bevel square tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Bevel square tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Bevel square Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Bevel square tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Bevel square Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Bevel square Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Bevel square Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Bevel square tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Bevel square Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Bevel square sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Bevel square tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Bevel square tenders.

Is EMD mandatory for all Bevel square tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Bevel square work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Bevel square tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Bevel square Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16664093
Location : krishnagar , west bengal
Source : GEM Tenders
LIVE TENDER
tender for workshop outfit pneumatic trainer kit each consisting of the following matching components and accessories , box drawing instrument , protractor celluloid , scale card board , scales plotting box wood 6 metric scales , set square transparent , set square celluloid , template architects and builders , geometrical models wooden plastic , templates circle ellipse furniture etc , french curves , flexible curves , radius curve metric , brass parallel rulers in a case , calculator scientific non programmable , proportional dividers , land measuring chain , ranging rod wooden fitted iron shoe , prismatic compass with stand , telescopic alidade , dumpy level with all accessories , transit theodolite with stand with all accessories , instrument for total station with latest modelwith all accessories , caliper outside spring joint , caliper inside spring joint , caliper odd leg firm joint , steel rule , scriber , hammer ball peen , centre punch , prick punch , divider spring joint , hammer copper brass , micrometer outside , micrometer inside , gauge feeler , gauge radius set , plain ring and plug gauge , wheel dresser hunting on type with star cutter , morse taper plug and ring gauge , sine bar with centers , morse taper , tap and die set , tap and die , reamer machine , parting tool holder with h s s blade , boring tool holder , angle plate , spirit level , tool maker s button , combination drill centre drill , st locker with drawer pigeonholes , angle gauge for tool grinding , hand chaser , tool cemented carbide assorted shaped external for steel turning , thread plug gauge , thread ring gauge , machine chaser , lathe mandrels diff types , coventry type die head self opening , collapsible tap with attachment , bore dial gauge stems , digimatic electronic vernier caliper , digimatic electronic outside micrometer , multimedia based simulator for cnc technology , universal weld measuring gauge , auto darkening helmet with desirable specification , pedestal grinder fitted with coarse and medium grain size grinding wheels dia 300 mm with desirable specification , work bench , oxy acetylene gas cutting blow pipe , fire buckets with stand , portable abrasive cut off machine , suitable gas cutting table , welding simulators for smaw gtaw gmaw , water cooled induction brazing machine , plastic machine with hot air gun uses of pepp and pvc sheet or pipe , swaging and flooring tool kit 45 degree tubing , die penetrant testing kit , anti spatter spray can desirable , gmaw torch nozzle tip , tig torch ceramic nozzle , tungsten electrode , copper filler wire , flux for brass , flux for copper , steel tape , steel measuring scale , marking knife , try square , bevel square , carpenter marking gauge , carpenter mortiser gauge , metal smoothing plane , firmer chisel , contraction measuring scale , rip saw , ball pein hammer , country drill with bow ball bearing type , breast drill , snip straight , oil cans , carpenter vice , saw sharpening vice , blower , grease gun , portable circular saw machine , portable planning machine , portable jig saw machine , portable router machine , set of turning tools for above lathe machine , drills chuck , portable disc sander , electric heater , universal wood working machine , small type compressor with spray painting system , ohm meter , digital multi meter , a c voltmeter , milli voltmeter , ammeter mc analog , digital wattmeter , power factor meter digital , magnetic flux meter , lux meter , megger , wheat stone bridge with galvanometer and battery , phase sequence indicator , temperature controlled soldering iron , current transformer , potential transformer , solar panel with battery , d c compound generator with control panel including fitted rheostat voltmeter ammeter and breaker , ac phase wound slip ring motor with starter switch , universal motor with starter switch universal motor along with control panel , single phase transformer core type air cooled , three phase transformer shell type oil cooled with delta star , used dc generators series shunt and compound type for overhauling practice , a c series type motor , manual coil winding machine , fully automatic ceiling fan stator winding machine , stepper motor with digital , single phase shaded pole induction motor , smart meter , ev charger , ev charger home , hss taper shank twist drills (short series) (q3), workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Aug 31, 2026 (5 days left)
Tender Value :
73.76L
View Documents
T18 Ref No : 16933377
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for trade training equipments required for aww and metal - smith shop plywood 12mm 8 feet x 4 feet aa grade , plywood 19mm 8 feet x 4 feet aa grade , plywood 6mm 8 feet x 4 feet aa grade , gi sheet 24g 8 feet x 4 feet , gi wire 8 swg 100 mtr roll , hand cutting machine , haps and staples 3 inch , hinges 1inch , hinges 2inch , hinges 3inch , ms sheet 20g 8 feet x4 feet , ms sheet 24g 8 feet x4 feet , pneumatic pop rivet gun , ppgi sheet 12 feet x 3.5 feet 24g , sheet cutting nibbler machine , side handle 4inch , 13 x 6 self screw star , 19 x6 self screw star , 2 track bottom 12 feet long , 2 track side 12 feet long , 2.5inch x 1.5 inch pipe 12 feet long , 2t oil for engine , 4mm drill bit steel , 5mm drill bit steel , 6mm hammer bit socket type , 6mm socket for bolt , 8mm drill bit steel , 90 degree corner clamp , 9mm navopan board 8 feet x4 feet , acp 4mm sheet 8 feet x4 feet , adze , aluminium door handle 6inch , aluminium door lock , ball pein hammer 0.5lb , band saw blade 3inch width , band saw machine belt , beeding 1 1 i 2 inch x 1 i 2inch teak wood first quality , beeding 1 inch x 1 i 2 inch teak wood first quality , beeding 1 i 2 inch x 1 i 2 inch teak wood first quality , bevel square , bolt, nut and washers , both side open 12 feet long , butt hinges 1inch , butt hinges 1.5inch , butt hinges 2inch , butt hinges 3inch , c gear 12feet long with gear wheel , carbon brush angle grinder , carbon brush circular saw machine , carbon brush drilling machine , carbon brush jig saw machine , carbon brush miter saw machine catpart no gcm12mx , carbon brush sanding machine , card file steel wire brush for file , carpenter marking gauge, mortise gauge , carpenter vice , carving tools set , centre punch , chalk piece white , circular saw blade 10 inch, 7 inch, 5 inch , claw hammer , clip rubber , cnc bit - 1.5mm ball nose , cnc bit - 1.5mm end mill , cnc bit - 2mm ball nose , cnc bit - 2mm end mill , cnc bit - 3mm ball nose , cnc bit - 3mm end mill , cnc bit - 4mm ball nose , cnc bit - 4mm end mill , cnc bit - 6mm end mill, plywood 12mm 8 feet x 4 feet aa grade, plywood 19mm 8 feet x 4 feet aa grade, plywood 6mm 8 feet x 4 feet aa grade, gi sheet 24g 8 feet x 4 feet, gi wire 8 swg 100 mtr roll, hand cutting machine, haps and staples 3 inch, hinges 1inch, hinges 2inch, hinges 3inch, ms sheet 20g 8 feet x4 feet, ms sheet 24g 8 feet x4 feet, pneumatic pop rivet gun, ppgi sheet 12 feet x 3.5 feet 24g, sheet cutting nibbler machine, side handle 4inch, 13 x 6 self screw star, 19 x6 self screw star, 2 track bottom 12 feet long, 2 track side 12 feet long, 2.5inch x 1.5 inch pipe 12 feet long, 2t oil for engine, 4mm drill bit steel, 5mm drill bit steel, 6mm hammer bit socket type, 6mm socket for bolt, 8mm drill bit steel, 90 degree corner clamp, 9mm navopan board 8 feet x4 feet, acp 4mm sheet 8 feet x4 feet, adze, aluminium door handle 6inch, aluminium door lock, ball pein hammer 0.5lb, band saw blade 3inch width, band saw machine belt, beeding 1 1 i 2 inch x 1 i 2 inch teak wood first quality, beeding 1 inch x 1 i 2 inch teak wood first quality, beeding 1 i 2 inch x 1 i 2 inch teak wood first quality, bevel square, bolt, nut and washers, both side open 12 feet long, butt hinges 1inch, butt hinges 1.5inch, butt hinges 2inch, butt hinges 3inch, c gear 12feet long with gear wheel, carbon brush angle grinder, carbon brush circular saw machine, carbon brush drilling machine, carbon brush jig saw machine, carbon brush miter saw machine catpart no gcm12mx, carbon brush sanding machine, card file steel wire brush for file, carpenter marking gauge, mortise gauge, carpenter vice, carving tools set, centre punch, chalk piece white, circular saw blade 10 inch, 7 inch, 5 inch, claw hammer, clip rubber, cnc bit - 1.5mm ball nose, cnc bit - 1.5mm end mill, cnc bit - 2mm ball nose, cnc bit - 2mm end mill, cnc bit - 3mm ball nose, cnc bit - 3mm end mill, cnc bit - 4mm ball nose, cnc bit - 4mm end mill, cnc bit - 6mm end mill
Agency / Dept :
indian army
Due Date :
Sep 01, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16808587
Location : domjur , west bengal
Source : GEM Tenders
LIVE TENDER
tender for supply installation and commissioning of tools and machinery for different trades vernier height gauge 300 mm , combination set 300 mm , machine vice with swiveling base 150 mm , universal machine vice swivel base 100 mm , demagnetizer chuck , surface plate cast iron 600 mm , marking table 90 cms , magnetic v block , static balancing stand , dial test indicator digital , all geared head lathe machine , pillar drill machine all geared , tool room lathe machine , all geared head lathe machine sliding surface , grinding machine pedestal 200 mm , pillar drilling machines 13mm , power saw machine 400 mm , micrometer out side 25mm , micrometer out side 50mm , micrometer out side 75mm , micrometer inside 25mm , micrometer inside 50mm , depth gauge micrometer 150 mm , vernier caliper 200mm , vernier micrometer 25mm , sliding surface and screw cutting lathe , pillar type drilling 20 mm , hydraulic trainer kit , hydraulic workstation , cut section model of hydraulic components , granite surface plate , slip gauge as johnson metric set , gauge snap go and not go , gauge plug single ended 5 to 55 , gauge telescopic set 150 mm , dial test indicator with stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer interchangeable , depth micrometer 25 mm , digital vernier caliper 150 mm , digital micrometer outside 25 mm , comparators gauge , engineers try square , surface roughness comparison plates , digital vernier caliper 200 mm , vernier bevel protector range 360deg , micrometer outside 25 mm , micrometer outside 50 mm , micrometer outside 75 mm , micrometer inside 150 mm , vernier caliper 150 mm , vernier height gauge 300mm , vernier bevel protector 360deg , industrial temperature gauge , lapping plate , torque wrench set , taps and dies complete set in box , taps and dies complete set , spanner double ended , spanner adjustable , interchangeable ratchet socket set , de tubular box spanner set , wheel dresser , drill chuck with key 12 mm , v block pair with clamps , angle plate , punch letter set , punch number set , portable hand drill electric , slotter , universal tool and cutter grinder machine , radial drill machine 1200 mm , silicon carbide grinding machine , grinding machine pedestal de 200 mm , high precision manual surface grinder , cylindrical grinder , power hack saw , milling cutter 10 mm , milling cutter 16 mm , milling cutter 20 mm , milling cutter 8 mm , milling cutter 45 , milling cutter 60 , milling cutter 90 , milling cutter bore dia 550 , milling cutter bore dia 600 , milling cutter bore dia 700 , milling cutter bore dia 750 , milling cutter rh 27 mm , milling cutter 450 lh 27 mm , milling cutter 600 lh 27 mm , milling cutter 600 rh 27 mm , milling cutter 50 mm , milling cutter 75 mm , milling cutter 25mm , milling cutter concave 63 mm , milling cutter convex 63 mm , involute gear cutter size 2 module , involute gear cutter size 2.5 module , involute gear cutter size 3 module , micrometer outside 100 mm , micrometer depth gauge 200 mm , vernier caliper 200 mm , direct reading vernier caliper 300 mm , digital vernier caliper 300 mm , vernier gear tooth caliper , sine bar 200 mm , universal dial test indicator with magnetic stand , gauge slip box metric 87 pieces set , magnifying glass 100 mm, as per boq
Agency / Dept :
department of industrial training
Due Date :
Sep 02, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16872213
Location : tawang , arunachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for masonry carpentry and general construction tools - crow bar heavy duty big size , mason trowel 4 inch steel with handle , mason trowel 5 inch steel with handle , mason trowel 6 inch steel with handle , mason trowel 8 inch steel with handle , mason trowel 9 inch steel with handle , plumb bob , transparent water level pipe 10 mm , mortar pan tasla 16 inch , stone breaking hammer 2 kg , mason thread cotton , mason thread nylon , spirit level 12 inch steel body , tape steel 2 metre steel case , tape steel 3 metre steel case , tape steel 15 metre steel case , hammer stone breaking 1 kg , wheel barrow single wheel , spare wheel for wheel barrow cast iron with solid rubber tyre and double ball bearing , dah iron 12 inch with handle , rammer earth 5 kg , earth rammer 14 lbs with wooden handle , folding entrenching shovel military specification , hammer stone dressing 1 kg , felling axe 2 kg without handle , hammer chisel face with handle 6 kg , mason hammer with chisel 850 gram , mason hammer chisel type , cordless rotary hammer drill 18 volt sds plus , electric planer for carpenter nput power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm , hand tool kit for carpenter , carpenter screw driver 18 inch , carborundum stone 6 inch x 2 inch x 1 inch , blade for jack plane 2 inch , carpenter hand drill machine , electric jack planer , electric circular saw 12 inch , electric jack plane , gurmala steel 9 inch to 12 inch , hacksaw frame 12 inch , raker 10 to 12 prong , electric circular saw with spare blade , raker 12 prong with wooden handle , hand operated bitumen sprayer can , sledge hammer 2 kg without handle , sledge hammer 5 kg to 6 kg without handle , stone breaking hammer 6 kg , stone dressing chisel half inch and three fourth inch , steel measuring tape 5 metre fibre case , steel measuring tape 15 metre fibre case , steel measuring tape 30 metre fibre case , hand saw 12 inch , hand saw 20 inch , carpenter chisel 1 inch , carpenter chisel 2 inch , auger eyed half inch , spirit level 8 inch pvc body , spirit level 12 inch pvc body , spirit level 18 inch pvc body , spirit level 24 inch pvc body , spirit level 18 inch steel body , spirit level 24 inch steel body, octagonal crow bar conforming to is 704 latest. material high carbon steel. length 1650 mm. diameter at hammer end 30 mm. nominal weight 11 kg. heat treated and forged. one chisel end and one hammer end. black oxide finish. make equivalent to tata or reputed manufacturer., conforming to is 6013. blade size 4 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 5 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 6 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 8 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 9 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., material forged steel or brass. weight 200/500 gram. precision machined pointed tip. complete with 2 metre nylon thread. corrosion resistant finish. suitable for masonry alignment., transparent flexible pvc water tube. internal diameter 10 mm. wall thickness 2 mm minimum. uv resistant. kink resistant. smooth inner surface. roll length 30 metre minimum., virgin hdpe or pp plastic. diameter 16 inch. capacity 18 to 20 litre. weight 700 gram minimum. heavy duty. unbreakable. crack resistant. smooth non stick inner surface. uv stabilized., head weight 2 kg. forged high carbon steel head. heat treated. face hardness 50 to 55 hrc. handle fiberglass or seasoned hardwood. handle length 800 to 900 mm. anti slip rubber grip. heavy duty construction. manufacturer iso 9001 certified., construction 56 tex x 3 x 3. material 100 percent cotton. linear density 560 gram per 1000 metre minimum. breaking load 78 newton minimum. ball weight 200 gram minimum. uniform twist. high strength. suitable for masonry line marking., material 100 percent nylon multifilament. diameter 1.5 mm minimum. breaking strength 100 newton minimum. ball weight 200 gram minimum. high tensile strength. abrasion resistant. water resistant. suitable for masonry alignment and layout work., non magnetic type. body material heavy duty steel. length 12 inch. accuracy 0.5 mm per metre or better. tube thickness 1.25 mm minimum. liquid ethyl ether or industrial methylated spirit. width 50 mm. height 20 mm. weight 165 gram minimum. warranty 1 year, measuring length 2 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 3 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 15 metre. blade material stainless steel. steel closed case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii., head weight 1 kg. forged high carbon steel head. heat treated. hardness 50 to 55 hrc. double face. fiberglass or hardwood handle. handle length 300 mm to 350 mm. anti slip grip. heavy duty construction., capacity 90 litre minimum. tray material pressed mild steel. tray thickness 1.2 mm minimum. frame heavy duty mild steel tubular construction. wheel diameter 380 mm minimum. pneumatic rubber tyre with steel rim. load capacity 150 kg minimum. powder coated finish., wheel diameter 380 mm minimum. cast iron rim. solid rubber tyre. double ball bearing. axle bore 20 mm. heavy duty construction. suitable for standard wheel barrow., blade length 12 inch. blade material drop forged high carbon steel. blade thickness 4 mm minimum. heat treated. cutting edge hardened. full tang construction. hardwood handle with steel rivets. overall length 450 mm minimum. heavy duty construction, head weight 5 kg. rammer head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. head height 100 mm minimum. hardwood seasoned wooden handle. handle length 1200 mm minimum. heavy duty construction suitable for earth compaction., rammer weight 14 lbs. head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. heat treated. seasoned hardwood handle. handle length 1200 mm minimum. heavy duty construction for compacting soil and aggregates., military specification folding entrenching shovel. three position locking mechanism. blade material high carbon steel. blade hardness 45 to 55 hrc. overall length 580 mm minimum when open. folded length 250 mm maximum. powder coated finish. serrated edge on one side. carry pouch included., head weight 1 kg. forged high carbon steel. heat treated. double face. face hardness 50 to 55 hrc. fiberglass or hardwood handle. handle length 300 mm to 350 mm. heavy duty construction., head weight 2 kg. drop forged high carbon steel. heat treated cutting edge. blade hardness 50 to 55 hrc. cutting edge width 120 mm minimum. eye suitable for standard wooden handle. rust resistant finish., head weight 6 kg. forged high carbon steel. one flat striking face and one chisel face. heat treated. face hardness 50 to 55 hrc. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction., head weight 850 gram. high carbon steel head. one square striking face and one chisel end. heat treated. face hardness 50 to 55 hrc. hardwood or fiberglass handle. handle length 300 mm minimum. heavy duty construction., head weight 600 gram to 800 gram. forged high carbon steel. one flat face and one chisel edge. heat treated. hardwood or fiberglass handle. handle length 300 mm minimum. suitable for brick and stone masonry work., voltage 18 volt dc. chuck type sds plus. battery lithium ion 4 ah minimum. motor type brushless or brushed. impact energy 1.5 joule to 2.6 joule. no load speed 0 to 1400 rpm. impact rate 0 to 4675 bpm. three operating modes rotary drilling hammer drilling and chiselling. maximum drilling capacity concrete 28 mm metal 13 mm wood 30 mm. tool weight 2.3 kg to 3.5 kg including battery. integrated mechanical or electronic safety clutch with anti rotation protection. vibration reduction system. variable speed control. forward and reverse function. led work light. fast charger. minimum two lithium ion batteries of 4 ah each. heavy duty carry case included. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or hilti or equivalent., input power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. heavy duty aluminium base plate with v groove. reversible tungsten carbide blades. dual chip ejection. adjustable depth control. parking shoe. ergonomic soft grip handle with safety lock switch. dust collection facility. accessories to include parallel guide wrench and dust bag. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., professional carpenter hand tool kit comprising essential hand tools. heavy duty carrying case. tools made of chrome vanadium steel or high carbon steel. ergonomic insulated handles. manufacturer iso 9001 certified. make bosch or stanley or taparia or ingco or equivalent., overall length 18 inch. blade material chrome vanadium steel. blade length 300 mm minimum. magnetic tip. hardened and tempered blade. ergonomic anti slip handle. manufacturer iso 9001 certified. make taparia or stanley or bosch or equivalent., size 6 inch x 2 inch x 1 inch. material silicon carbide. double sided coarse and fine grit. suitable for sharpening carpenter tools. heavy duty quality., blade width 2 inch. material high carbon tool steel. hardened and tempered. hardness 58 to 62 hrc. precision ground cutting edge. suitable for standard hand jack plane., manual hand drill with geared drive. chuck capacity 1.5 mm to 10 mm. steel body. hardened steel gears. wooden or polypropylene handle. smooth operation. heavy duty construction., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. tungsten carbide blades. aluminium base plate. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. blade guard. dust extraction port. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. aluminium base plate. tungsten carbide blades. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., material high carbon steel. size 9 inch to 12 inch. hardened and tempered. polished finish. heavy duty construction. suitable for carpenter marking and shaping work. indigenous pattern., frame size 12 inch. heavy duty tubular steel frame. suitable for 300 mm blade. adjustable blade tension. ergonomic handle. powder coated finish. blade included. make taparia or stanley or eclipse or equivalent., heavy duty garden raker. number of prongs 10 to 12. prong material high carbon steel. head width 300 mm to 350 mm. prongs heat treated. handle length 1200 mm to 1500 mm. hardwood handle with firm grip. powder coated finish., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 4000 rpm minimum. cutting depth 100 mm minimum at 90 degree. bevel capacity 0 degree to 45 degree. carbide tipped blade. blade guard. dust extraction port. soft grip handle. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. one extra tungsten carbide tipped blade included. heavy duty carry case. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., number of prongs 12. head material mild steel. head length 12 inch. heat treated prongs. hardwood handle length 1200 mm minimum. powder coated finish. heavy duty construction., capacity 10 litre minimum. material heavy gauge mild steel. hand operated pump. brass spray nozzle. flexible hose 1.5 metre minimum. working pressure 3 bar minimum. leak proof construction. powder coated finish. suitable for spraying bitumen emulsion and primer., conforming to is 841 latest. head weight 2 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., conforming to is 841 latest. head weight 5 kg to 6 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., head weight 6 kg. forged high carbon steel. heat treated. double face. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction, size half inch and three fourth inch. material forged high carbon steel. heat treated. hardness 50 to 55 hrc. overall length 200 mm to 250 mm. hardened cutting edge. suitable for stone dressing and masonry work., measuring length 5 metre. blade material stainless steel. fibre reinforced abs case. blade width 19 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 15 metre. blade material stainless steel. fibre reinforced abs case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 30 metre. blade material stainless steel. fibre reinforced abs case. blade width 13 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., blade length 12 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for wood cutting. make stanley or bahco or taparia or equivalent., blade length 20 inch to 21 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for heavy duty wood cutting. make stanley or bahco or taparia or equivalent., blade width 1 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., blade width 2 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., size half inch. material forged high carbon steel. heat treated. precision ground spiral. eye type. suitable for wood boring. rust resistant finish. make taparia or stanley or equivalent., length 8 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 12 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 24 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent., length 24 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent.
Agency / Dept :
border road organisation BRO
Due Date :
Sep 09, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812147
Location : secunderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for try square 10 cm blade , straight scriber 15 cm , hacksaw frame fixed 30 cm , safety goggles , caliper 15 cm hermaphrodite , divider 15 cm spring , screw driver 15 cm , cold chisel flat 12mm , ball pane hammer 450 gm with handle. , ball pane hammer bal 220 gm with handle , half round file 15 cm llnd cut , dot punch 10 cm , file cant saw 15 cm smooth , file round 20 cm 2nd cut , file square 15 cm 2nd cut , feeler gauge 10 blades , file triangular 20 cm 2nd cut , file swiss type needle set of 12 , file half round 25 cm iind cut , file card , stone oil 15 cm x 5 cm x 2point5 cm , oil can 250ml , spanner metric d e set of 10 pieces , interchangeable ratchet socket set 12 mm driver , box spanner 6 25 mm set of 8 with tommy bar , clamp toolmaker 5 cm and 7point5 cm set of 2 , clamp c 5 cm , hand reamer adjustable cover max 9 12 i8mm set of 3 , hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4 , reamer parallel 12 to 16mm set of 5 , scraper flat 15cm , scraper half round 15 cm , chisel cold 9 mm diamond , chisel cold 9 mm cross cut , chisel cold 19mm flat , chisel cold 9 mm round nose , extractor stud ezy out , set combination 30 cm , micrometer 0to25mm out side , micrometer 25to50mm out side with 25 mm test piece , micrometer 50to75mmout side with 50mm test piece , micrometer in side 25to50mm , vernier caliper 20 cm , vernier height gauge 30 cm , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , drill twist taper shank 6mm to 25 mmx1point5 , drill chuck 12mm , wheel dresser 1 for 4 units , machine vice 10cm , sleeve drill morse 0to1 1to2 2to3 , leg vice 10cm jaw , wing compass 25point4cm or 30cm , radius gauges assorted 7 to 15 mm , dial test indicator 0point01 mm , magnetic stand for dti , counter sinking tool , rule steel 30 cm to read metric , rule steel 60 cm , straight edge 45 cm steel , surface plate 45x45 cm cl per granite , marking table 91x91x122 cm , universal scribing block 22 cm , v block pair 7 cm and 15 cm with clamps , square adjustable 15 cm blade , angle plate 10x20 cm , spirit level 15cm metal , portable hand drill electric 0 to 6 mm 550 watt , twist drill straight shank 15 to 12 mm by 1by2 mm , twist drill straight shank 8 mm to 15 mm by 1by2 mm , taps and dies complete set in box b a , taps and dies complete set in box width worth , taps and dies complete set in box 3to18 mm set of 10 , pipe wrench 40cm , pipe wrench 30 cm , pipe vice 100mm , adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm , gauge slip as johnson metric set , carbide wear block 0 lmm 02mm , gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs , gauge plug single ended 05 to 55 by 5mm set of 1 pcs , gauge telescopic up to 150mm , dial vernier caliper 0 to 200mm lc00point05mm universal type , vernier micrometer 0 to 50 mm , depth micrometer 0to 100mm 0point01mm , vernier caliper 150mm lc 0point02mm , comparators stand with dial indicator indicator lc 0point01 mm , engineers try square knife edge 150mm blade , surface roughness comparison plates n1 n12 grade , digital vernier caliper 20cm , digital outside micrometer 0 to 25mm , digital dial test indicator , straight snips 250by300mm , bend snips 250by300mm , swage block , sine bar 125mm , sine bar 250mm , surface roughness tester, raw material for fitter trade nstiv, try square 10 cm blade, straight scriber 15 cm, hacksaw frame fixed 30 cm, safety goggles, caliper 15 cm hermaphrodite, divider 15 cm spring, screw driver 15 cm, cold chisel flat 12mm, ball pane hammer 450 gm with handle., ball pane hammer bal 220 gm with handle, half round file 15 cm llnd cut, dot punch 10 cm, file cant saw 15 cm smooth, file round 20 cm 2nd cut, file square 15 cm 2nd cut, feeler gauge 10 blades, file triangular 20 cm 2nd cut, file swiss type needle set of 12, file half round 25 cm iind cut, file card, stone oil 15 cm x 5 cm x 2point5 cm, oil can 250ml, spanner metric d e set of 10 pieces, interchangeable ratchet socket set 12 mm driver, box spanner 6 25 mm set of 8 with tommy bar, clamp toolmaker 5 cm and 7point5 cm set of 2, clamp c 5 cm, hand reamer adjustable cover max 9 12 i8mm set of 3, hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4, reamer parallel 12 to 16mm set of 5, scraper flat 15cm, scraper half round 15 cm, chisel cold 9 mm diamond, chisel cold 9 mm cross cut, chisel cold 19mm flat, chisel cold 9 mm round nose, extractor stud ezy out, set combination 30 cm, micrometer 0to25mm out side, micrometer 25to50mm out side with 25 mm test piece, micrometer 50to75mmout side with 50mm test piece, micrometer in side 25to50mm, vernier caliper 20 cm, vernier height gauge 30 cm, vernier bevel protractor, screw pitch gauge, wire gauge metric standard, drill twist taper shank 6mm to 25 mmx1point5, drill chuck 12mm, wheel dresser 1 for 4 units, machine vice 10cm, sleeve drill morse 0to1 1to2 2to3, leg vice 10cm jaw, wing compass 25point4cm or 30cm, radius gauges assorted 7 to 15 mm, dial test indicator 0point01 mm, magnetic stand for dti, counter sinking tool, rule steel 30 cm to read metric, rule steel 60 cm, straight edge 45 cm steel, surface plate 45x45 cm cl per granite, marking table 91x91x122 cm, universal scribing block 22 cm, v block pair 7 cm and 15 cm with clamps, square adjustable 15 cm blade, angle plate 10x20 cm, spirit level 15cm metal, portable hand drill electric 0 to 6 mm 550 watt, twist drill straight shank 15 to 12 mm by 1by2 mm, twist drill straight shank 8 mm to 15 mm by 1by2 mm, taps and dies complete set in box b a, taps and dies complete set in box width worth, taps and dies complete set in box 3to18 mm set of 10, pipe wrench 40cm, pipe wrench 30 cm, pipe vice 100mm, adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm, gauge slip as johnson metric set, carbide wear block 0 lmm 02mm, gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs, gauge plug single ended 05 to 55 by 5mm set of 1 pcs, gauge telescopic up to 150mm, dial vernier caliper 0 to 200mm lc00point05mm universal type, vernier micrometer 0 to 50 mm, depth micrometer 0to 100mm 0point01mm, vernier caliper 150mm lc 0point02mm, comparators stand with dial indicator indicator lc 0point01 mm, engineers try square knife edge 150mm blade, surface roughness comparison plates n1 n12 grade, digital vernier caliper 20cm, digital outside micrometer 0 to 25mm, digital dial test indicator, straight snips 250by300mm, bend snips 250by300mm, swage block, sine bar 125mm, sine bar 250mm, surface roughness tester
Agency / Dept :
directorate general of training
Due Date :
Sep 07, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812310
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for cut , file flat 300 mm second cut , file flat 200 mm bastard , file flat 300 mm bastard , file swiss type needle set of 12 , file half round 250 mm second cut , file half round 250 mm bastard , file round 250 mm bastard , file hand 150 mm second cut , file card wire brush , oil can 250 ml , plier combination insulated 150 mm , wooden handle forged soldering iron copper bit , blow lamp 500 ml , spanner double ended set of 8 pcs , spanner adjustable 150 mm , interchangeable ratchet socket set with 12 mm driver , double ended tubular box spanner set with tommy bar , glass magnifying 75 mm , clamp tool maker 50 mm , clamp tool maker 75 mm , c-clamp 100 mm , c-clamp 200 mm , reamer hand set pin taper straight flute , reamer machine parallel helical flute , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold 9 mm x150 mm cross cut , chisel cold 9 mm x 150 mm diamond , chisel cold flat 9 mm x 100 mm , chisel cold 9 mm x 100 mm round nose , drill chuck 12 mm with key , pipe wrench 400 mm , pipe vice 100 mm , adjustable pipe die set b.s.p , wheel dresser , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , sleeve drill morse , vice bench 150 mm jaw , bench working 2400 x 1200 x 900 mm , almirah 1800 x 900 x 450 mm , lockers with 12 drawers standard size , metal rack 1820 x 900 x 450 mm , instructor table , instructor chairs , black board with easel , fire extinguisher , fire buckets with stand , vice machine 100 mm jaw , wing compass 300 mm , hammer hand 1 kg. with handle , torque wrench 14 to 68 nm ratchet type , power tools for fastening capacity 10-18mm , different profile gauges plate type for demonstration , knurling tool diamond , knurling tool straight and diagonal , indexable boring bar with inserts , temperature gauge range , dowel pin straight , standard tap screws , lapping plate dia , metric drill gauge , letter drill gauge , number drill gauge , cast iron globe valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flat belt , v- belt and flat belt , washer, clutch, keys, jib, cotter and circlips , hollow punch , bearing different types , lifting sling , bearing extractor , pulley extractor , trammel 300 mm , punch prick , mallet , aviation snip straight cut 300 mm , hammer flat headed with handle , hammer planishing , snip bent left cut 250 mm , stake hatchet with leg , stake grooving , gauge slip metric as johnson set , gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs , gauge plug single ended 5 to 55 by 5 mm set of 11 piece , gauge telescopic 8 to 150 mm , dial test indicator on stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator gauge , engineer try square , surface roughness comparison , vernier bevel protractor , carbide wear block , lathe tools h.s.s. , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type with stand manually , adjustable pipe chain tong to take pipes , spanner adjustable , s.s. and s.c. centre lathe , drilling machine pillar sensitive , drilling machine bench sensitive , d.e. pedestal grinding machine , transformer welding set 300 amps , welding cable , lugs for cable , earth clamps , arc welding table , oxy- acetylene gas welding set , gas welding table with, lab of fitter trade, steel rule 150mm with metric and british graduation, try square 150mm blade, caliper inside 150mm spring, caliper 150mm hermaphrodite spring type, caliper outside 150mm spring, divider spring joint 150mm, scriber 150mm multiple 5mm, punch centre 120mm multiple 10mm, screw driver 150mm multiple 6mm, chisel cold flat 20mm multiple 150mm, hammer ball peen 450 gm, hammer ball peen220 gm, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles plain, punch dot 100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm, stud extractor, combination set 300 mm, micrometer outside 0 to 25 mm, micrometer outside 25 to 50 mm, micrometer outside 50 to 75 mm, micrometer inside with extension rods, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, surface plate 600 multiple 600 mm c.i. granite with stand and cover, marking table 900 multiple 900 multiple 900 mm mild steel, universal scribing block 220 mm, v-block pair 150 multiple 100 multiple 100 mm with clamp, angle plate 150 multiple 150 multiple 250 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 13 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, taps and dies complete set in a box, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, gauge feeler, file triangular 200 mm second cut, file flat 300 mm second cut, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card wire brush, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, blow lamp 500 ml, spanner double ended set of 8 pcs, spanner adjustable 150 mm, interchangeable ratchet socket set with 12 mm driver, double ended tubular box spanner set with tommy bar, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c-clamp 100 mm, c-clamp 200 mm, reamer hand set pin taper straight flute, reamer machine parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b.s.p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, almirah 1800 x 900 x 450 mm, lockers with 12 drawers standard size, metal rack 1820 x 900 x 450 mm, instructor table, instructor chairs, black board with easel, fire extinguisher, fire buckets with stand, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg. with handle, torque wrench 14 to 68 nm ratchet type, power tools for fastening capacity 10-18mm, different profile gauges plate type for demonstration, knurling tool diamond, knurling tool straight and diagonal, indexable boring bar with inserts, temperature gauge range, dowel pin straight, standard tap screws, lapping plate dia, metric drill gauge, letter drill gauge, number drill gauge, cast iron globe valve flanged type, c.i. sluice gate valve flanged type, stop cock, slip-on forged steel flange, pipe threading die with handle, pulleys for v-belt or flat belt, v-belt and flat belt, washer, clutch, keys, jib, cotter and circlips, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel 300 mm, punch prick, mallet, aviation snip straight cut 300 mm, hammer flat headed with handle, hammer planishing, snip bent left cut 250 mm, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs, gauge plug single ended 5 to 55 by 5 mm set of 11 piece, gauge telescopic 8 to 150 mm, dial test indicator on stand, sine bar 125 mm, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator gauge, engineer try square, surface roughness comparison, vernier bevel protractor, carbide wear block, lathe tools h.s.s., lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type with stand manually, adjustable pipe chain tong to take pipes, spanner adjustable, s.s. and s.c. centre lathe, drilling machine pillar sensitive, drilling machine bench sensitive, d.e. pedestal grinding machine, transformer welding set 300 amps, welding cable, lugs for cable, earth clamps, arc welding table, oxy-acetylene gas welding set, gas welding table with positioner, welding torch tips, trolley for gas cylinders, hammer chipping 300g, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (12 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (16 days left)
Tender Value :
34.41L
View Documents
T18 Ref No : 16933418
Location : gangajalghati , west bengal
Source : GEM Tenders
LIVE TENDER
corrigendum tender for 1100018440 , 1100018444 , 1100014108 , 1100014071 , 1100014082 , 1100014076 , 1100014056 , 1100014059 , 1100014066 , 1100014061 , 1100014057 , 1100014063 , 1100014084 , 1100016772 , 1100016774 , 1100016776 , 1100014669 , 1100014666 , 1100014658 , 1100014662 , 1100014675 , 1100014787 , 1100014709 , 1100014697 , 1100014745 , 1100014758 , 1100014751 , 1100020295 , 1300059843 , 1300059847 , 1300058521 , 1300059646 , 1300059658 , 1300010411 , 1300038449 , 1300010395 , 1300010408 , 1300010400 , 1300010413 , 1300010404 , 1300058578 , 1300058581 , 1100013872 , 1100013873 , 1100013871 , 1300061364 , 1300061415 , 1300066328 , 1300066331 , 1100013852 , 1100013870 , 1100013875 , 1100013855 , 1100013854 , 1100013857 , 1100013843 , 1100013864 , 1100013862 , 1300010416 , 1100012852 , 1100016843 , 1100012848 , 1100012883 , 1100012854 , 1100012881 , 1100012879 , 1100012841 , 1100022456 , 1100022457, as per attachment - pure graphite packing in braided form reinforced with inconel wire suitable to withstand pressure of 450 bar and temperature 600 degree c., pure graphite packing in braided form reinforced with inconel wire suitable to withstand pressure of 450 bar and temperature 600 degree c, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:32 mm, od:44 mm, th:6 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:27 mm, od:55 mm, th:14 mm, grafseal formed gland packing in two halves with oblique cut for high gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure300 kg/cm. sq. ph-0-14, size:id:44 mm, od:68 mm, th:12 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:27 mm, od:46 mm, th:9.5 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:38 mm, od:60 mm, th:11 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure300 kg/cm. sq. ph-0-14, size:id:30 mm, od:46 mm, th:8 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:17 mm, od:42 mm, th:12.5 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:38 mm, od:57 mm, th:9.5 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure300 kg/cm. sq. ph-0-14, size:id:90 mm, od:122 mm, th:16 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:14 mm, od:32 mm, th:9 mm, grafseal formed gland packing in two halves with oblique cut for high pressure valves. service temperature-600 deg c, pressure-300 kg/cm. sq. ph-0-14, size:id:26 mm, od:38 mm, th:6 mm, flexible pure graphite sheet, 83 mm width x 0.76 mm thick x 263.2 mm long, flexible pure graphite sheet, 95 mm width x 0.76 mm thick x 300.9 mm long, flexible pure graphite sheet, 57 mm width x 0.76 mm thick x 181.5 mm long, jointing sheet non asbestos metallic (reinforced with metallic wire mesh), working pressure - 200 kg/cm² or above, working temp.- 550°c or above, size- 1500 x 2000 mm or 1000 x 1000 mm, thickness- 1 mm. suitable for steam., jointing sheet non asbestos metallic (reinforced with metallic wire mesh), working pressure - 200 kg/cm² or above, working temp.- 550°c or above, size- 1500 x 2000 mm or 1000 x 1000 mm, thickness- 2 mm. suitable for steam., jointing sheet non asbestos metallic (reinforced with metallic wire mesh), working pressure - 200 kg/cm² or above, working temp.- 550°c or above, size- 1500 x 2000 mm or 1000 x 1000 mm, thickness- 3 mm. suitable for steam., jointing sheet non asbestos metallic (reinforced with metallic wire mesh), working pressure - 200 kg/cm² or above, working temp.- 550°c or above, size- 1500 x 2000 mm or 1000 x 1000 mm, thickness- 4 mm. suitable for steam, jointing sheet non asbestos, reinforced with metallic wire mesh, working pressure - 200 kg/cm² or above, working temp.- 540°c or above, size- 1500mm x 2000 mm x 5mm, suitable for water, steam, superheated steam, jointing sheet non asbestos, non metallic, working pressure - 70 kg/cm² or above, working temp.- 300°c or above, size- 1500mm x 2000 mm x 0.5mm, suitable for water, steam, superheated steam, jointing sheet non asbestos non metallic working pressure - 150 kg/cm² or above, working temp.- 400°c or above, size-2000 x 1500 x 0.5 mm. suitable for oil., jointing sheet non asbestos non metallic working pressure - 150 kg/cm² or above, working temp.- 400°c or above, size-2000 x 1500 x 0.8 mm. suitable for oil., jointing sheet non asbestos non metallic, working pressure - 150 kg/cm² or above, working temp.- 400°c or pressure - 150 kg/cm² or above, working temp.- 400°c or above, size- 1500 x 2000 mm or 1500 x 1600 mm, thickness- 1.5 mm. suitable for oil., jointing sheet non asbestos non metallic, working pressure - 150 kg/cm² or above, working temp.- 400°c or above, size- 1500 x 2000 mm or 1500 x 1600 mm, thickness- 2 mm. suitable for oil., jointing sheet non asbestos non metallic, working pressure - 150 kg/cm² or above, working temp.- 400°c or above, size1500 x 2000 mm or 1500 x 1600 mm, thickness- 3 mm. suitable for oil., packing ropes for labyrinth seal, temp - 300 deg c, pr - 50 bar, moc - non asbestos, dimension - 12.5 mm sq, length - 1950 mm, ready cut (pre-cut) gasket for coal nozzle specification: od=780 mm, id=700 mm, thk=3 mm, gasket type: non- asbestos, metallic,, ready cut (pre-cut) gasket for coal nozzle (burner isolation gate) specification: od=840 mm, id=640 mm, thk=3 mm, 11 holes of ø 28 mm on pcd 768 mm, ready cut (pre-cut) gasket for ignitor assembly specification: od=125 mm, id=60 mm, thk=3 mm, gasket type: non- asbestos, metallic,, ready cut (pre-cut) gasket for oil gun assembly specification: od=310 mm, id=170 mm, thk=3 mm, gasket type: non- asbestos, metallic, ready cut (precut) gasket for scanner assembly specification: od=170 mm, id=90 mm, thk=3 mm, gasket type: nonasbestos, metallic,, spiral wound metallic gasket for boiler drum & bottom ring header specification: sealing element od “b” =457 mm, sealing element id “c” =419 mm, sealing element thk=5 mm, spiral wound gasket with outer centering ring, outer ring od “a” -127.0 mm, sealing element id “c” -76.8 mm, sealing element od “b”- 105 mm, sealing element thk- 5.3 mm, ring thk- 3.5 mm, spiral wound metallic gasket for ms erv & ms erv isolating valve specification: sealing element od “b” =150 mm, sealing element id”c”=120 mm, sealing element thk=5 mm, spiral wound metallic gasket for ms erv pilot valve specification: sealing element od “b” =60 mm, sealing element id “ c” =40 mm, sealing element thk=5 mm, spiral wound metallic gasket for ms erv pilot valve specification: sealing element od “b” =43 mm, sealing element id “c”=32 mm, sealing element thk=5 mm, spiral wound metallic gasket for y type valve specification: sealing element od “b” =78 mm, sealing element id “c” =63 mm, sealing element thk=5 mm, spiral wound metallic gasket for hrh erv main valve specification: sealing element od “b” =220 mm, sealing element id “c” =190 mm, sealing element thk=5 mm, spiral wound metallic gasket for scaph valve specification: sealing element od “b” =190 mm, sealing element id “c”=170 mm, sealing element thk=5 mm, spiral wound metallic gasket for scaph valve specification: sealing element od “b” =305 mm, sealing element id “c”=275 mm, sealing element thk=5 mm, ready cut (pre-cut) gasket for pa & fd cooler, type-i specification: od=152 mm, id=100 mm, thk=3 mm,, ready cut (pre-cut) gasket for pa & fd cooler, type-ii specification: od=152 mm, id=100 mm, thk=3 mm, ready cut (pre-cut) gasket for pa & fd cooler, type-iii specification: od=53 mm, id=27 mm, thk=3 mm, ready cut (pre-cut) gasket for dome valve (set of gaskets) specification: od=405 mm, id=320 mm, 8 nos. of holes of ø23 mm at pcd of 359 mm, ready cut (pre-cut) gasket for dome to vessel specification: od=520 mm, id=402 mm, thk=3 mm, 8 specification: od=520 mm, id=402 mm, thk=3 mm, 8 nos. of holes of ø23 mm at pcd of 470 mm, ready cut (pre-cut) gasket for mpo top specification: od=781 mm, id=591 mm, thk=3 mm, 12 holes of ø24 mm at pcd of 711 mm, ready cut (pre-cut) gasket for mpo bottom, ready cut (pre-cut) gasket for lub oil inlet line of coal mill specification: od=102 mm, id=50 mm, thk= 3.0 mm, ready cut (pre-cut) gasket for lub oil outlet line of coal mill specification: od=250 mm, id=125 mm, thk=3.0 mm, 8 holes of ø18 mm at pcd of 212 mm, ready cut (pre-cut) gasket for coal mill lub oil pump model: pdfu-45-4g, type-i specification: as per attached drawing, thickness – 0.3 mm, ready cut (pre-cut) gasket for coal mill lub oil pump model: pdfu-45-4g, type-ii specification: as per attached drawing, thickness – 0.3 mm, ready cut (pre-cut) gasket for coal mill lub oil pump model: pdfu-45-4g, type-iii specification: as per attached drawing, thickness – 0.3 mm, ready cut (precut) gasket for lube oil cooler of coal mill type-i specification: od=326 mm, id=286 mm, thk=3 mm, ready cut (pre-cut) gasket for lube oil cooler of coal mill type-ii specification: od=326 mm, id=286 mm, thk=3 mm, set of gaskets for water line flanges of lub oil cooler of coal mill, id: 61 mm, od: 93 mm, thickness: 3 mm, no holes, set of gaskets for oil line flanges of lub oil cooler of coal mill, id: 61 mm, od: 93 mm, thickness: 3 mm, no holes, spiral wound metallic gasket for hrh erv pilot valve specification: sealing element od “b”=43 mm, sealing element id “c”=34 mm, sealing element thk=5 mm, non asbestos packing, size- 8 mm round (to withstand temperature - 650 degree c), non asbestos packing, size- 10 mm round (to withstand temperature - 650 degree c), non asbestosdry packing for general steam and insulation mechanical packing for hot gases,duct etc. in coil of 5kg. size 12.50mm dia (to withstand temperature - 650 degree c), non asbestos packing, size- 12.5 mm square (to withstand temperature - 650 degree c), non asbestos packing, size- 14 mm round (to withstand temperature - 650 degree c), non asbestos packing, size- 14 mm square (to withstand temperature - 650 degree c), non asbestos packing, size- 20 mm square (to withstand temperature - 650 degree c), non asbestos thermal insulation webbing tape 3mm x 50mm (to withstand temperature 600 degree c). thickness 3 mm to be achieved after compression., gland packing for sbv assy. with bull ring (in single oblique cut) with one face bevelled to an angle of 15 deg and packing ring (in single oblique cut) shall be of style 80 of spitmaan make or equivalent. size: od- 25.4 mm, id- 12.7 mm, thk8.0 mm,, swivel tube packing for wall blower, size: od75.75 mm, id- 58.03 mm, total height of packing set- 87.2 mm
Agency / Dept :
damodar valley corporation DVC
Due Date :
Aug 29, 2026 (3 days left)
Tender Value :
15.27L
View Documents
T18 Ref No : 15720333
Location : jagatsinghpur , odisha
Source : GEM Tenders
corrigendum tender for beading plastic pvc 1 inch , beading plastic pvc 3 by 4 inch , beading plastic pvc 1 by 2 inch , argon gas with cylinder 7 kg pressure , wire mesh ss 12x12 mm , auto hinges set 16 degree , auto hinges set 8 degree , drill bit set 1 to 5 mm , wooden batten teak 1 inch x 3 inch x 6 ft , wooden batten teak 2 inch x half inch x 6 ft , nails one and half inch , lock sliding glass as per sample , emery paper 80 , emery paper 108 , e channel aluminium 12 ft , bevel square digital , plastic holding pliers , t spanners 6 inch , gas cylinder regulator with diaphragm , fevicol special repair 998 , notice board clamp , jig saw blade , sliding glass wheel , nails 2 inch , magnetic catch , thinner 234 , varnish sheelac, procurement of 27 items of yard material, beading plastic pvc 1 inch, beading plastic pvc 3 by 4 inch, beading plastic pvc 1 by 2 inch, argon gas with cylinder 7 kg pressure, wire mesh ss 12x12 mm, auto hinges set 16 degree, auto hinges set 8 degree, drill bit set 1 to 5 mm, wooden batten teak 1 inch x 3 inch x 6 ft, wooden batten teak 2 inch x half inch x 6 ft, nails one and half inch, lock sliding glass as per sample, emery paper 80, emery paper 108, e channel aluminium 12 ft, bevel square digital, plastic holding pliers, t spanners 6 inch, gas cylinder regulator with diaphragm, fevicol special repair 998, notice board clamp, jig saw blade, sliding glass wheel, nails 2 inch, magnetic catch, thinner 234, varnish sheelac
Agency / Dept :
indian coast guard ICG
Due Date :
Jun 11, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15672834
Location : katni , madhya pradesh
Source : GEM Tenders
tender for fitter hand tools caliper harmafrodaite , chisel cold flat , hexa frame fixed type , safety goggles , straight ede , stud extrecter , verneir caliper , marking table , portable hand drill machine electric type , drill twist taper shank , file round second cut , file trungular second cut , file flate second cut t safe edge , file half round second basterd , file round secont bastard , file carad wire brush , wooden handal soldring iron copper bit , blow lamp , inter chegeable ratchet socket set , double ended tublare box spanner set with tomm bar , clamp toolmaker , hand reamer set taper pin straught fiute , machine remerr prallel helical fiute , chisel cold crosscut and diamond point , adjustable pipe die set bsp , wheel dresser star dresser with holder , machine vice swivel base , locker with 8 drawer , metal rack , machine vice , wing compass , hand hammar with handle , torque wrench standard ratchet , power tools for fastninig , different profile gauge plate type , indexable boribar with inserts , tempreature gauge , dowel pin starigut , standard tap screw , lapping plate , meduam carboon heat trated alloy steel metric stand , capsscrew , drill gauge , cast iron valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip on forge steel flange , bolt nut with washer , pully for flat belt , steel keys , packing gasket , washer cluth key jib cotter and cirlip , drill drift , bearing different type , lifting sling , bearing extactor , pully extractor , flat headed hammer with handel , planishshing hammer , snip bent left cut , gauge snape go and not go , gauge pluge , gauge telescopic set , dial vernier cliper universal , depth micrometer , digital micrometer outside , comparator gauge dial indiate with stand and vracket , enggineering try squar , surface roughnes comerission plate , pipe bender machine , pedastel type grinding machine , hexa frame wing nut , file square secound cut , file flat bastard , stake grooving, jenny caliper odd leg hermaphrodite caliper 6 inch 150mm adjustable steel marking and scribing tool for woodworking and metalworking 150mm, drop forged chisel 19x25x200mm heavy duty carbon steel tool for woodworking metal cutting masonry construction and industrial applications 20x150mm, heavy duty hand saw, 12 inch hacksaw frame 300mm, safety goggles with clear lens lightweight, scratch and impact resistant safety glasses for multipurpose use for pollution, dust, riding and construction work normal size, straight edge with bevel 300mm, bolt screw extractor remover set easy out drill bits set of 8, vernier caliper 150mm, 6 inches, magnetic steel made with pinch fine measure function 150mm, surface finish hand scraped types hole type & t-slot type material cast iron size 900x900x900mm power consumption customized, drill 13mm, 650w, 2800rpm with auto chuck in bmc box, high speed steel taper shank twist drills 8-20mm, file round second cut 200mm for plastic laminate edge finishing grade high carbon hardened steel, file trungular second cut 200mm for plastic laminate edge finishing grade high carbon hardened steel, file flate second cut t safe edge 300mm for plastic laminate edge finishing grade high carbon hardened steel, file half round second basterd 250mm for plastic laminate edge finishing grade high carbon hardened steel, file round secont bastard 250mm for plastic laminate edge finishing grade high carbon hardened steel, file carad wire brush 3x5 inch, wooden handle forged soldering iron copper bit 250grm, brass blow lamp pump blow torch blow gun kerosene lamp 0.5l, combinational ratchet socket wrench spannar tool goti set with carry box for automobiles/bike/car repair tool kit 32pc socket set (32pc in blue box) 12mm, tubular spanner set, 9pcs dual-ended wrench socket plumber back nut tap spark plug spanner set extended spark plug wrench 6-25mm, toolmaker parallel clamps- vice craft diy machine tools(u) 5-7.5mm, hand reamer set (tapar pin straight flute) 6-16mm, machine remerr prallel helical fiute 12-16mm, diamond point cut & flat cut chisel combo 9x150mm, pipe die set 1x2inch, 3x4inch,1inch bsp die handle, grinding wheel dresser, star bench grinding restorer device, grinder hand tool accessories for wheel surface correction, maintenance, sharpening, polishing 150mm, precision milling machine vice, 100 mm width, swivel base, heavy duty 100mm, industrial locker cabinet with key locking feature 8 drawer, adjustable set of 4-shelf metal storage shelving unit 1820x1820x450mm, precision milling machine vice, 100 mm width, heavy duty100mm, wing compass heavy duty metal layout tool for machinists woodworking metalworking scribing and marking circles 254-300mm, steel club hammer with handle 1000gm, heavy duty drive torque wrench 14-68 nm adjustable with reinforced gear, forward/reverse ratchet and ball lock design automotive torque wrench for car wheels, bike and workshop use, corded rotary hammer 18mm electric drill machine, different profile gauges plate type for demonstration mitric standad, alloy steel reduced shank indexable boring bars, size 1inch, thermometer temprature gauge 0-150degree c dial & bimetal 0-150 c, dowel pin ms (mild steel) standard 1inch, standard tap screw 3-16mm, aluminum lapping plate master lap 6inch, meduam carboon heat trated alloy steel metric stand 6-16 mm, capsscrew mild steel 6-12mm, drill gage 12.5-30mm, cast iron pn 1.6 flanged sluice valve, 150nb size 150 mm body material cast iron, c.i. sluice gate valve flanged type 150nb material cast iron valves or ductile iron valves hand wheel with wheel media water media type water design is standard surface finishing zinc epoxy product type valves usage/application waterline, stopcock brass compression valve - durable with bs1010 and bs en1213 standards, stop tap isolation valve for water mains 25nb, slip on forge steel flange carbon steel 150nb, bolts with nuts and washers full threaded hex socket cap screws 20x2.5x90, motor pulley jaw pully cone pully, multi-groove 50mm, stainless steel key stock assortment set 8mm 10mm 12mm 16mm 20mm 25mm 30mm round ended parallel drive shaft key parallel keys pulley feather key for fastening fiting, rubber packing gasket, for industrial normal size, washer cluth key jib cotter and cirlip 25mm, high speed steel ejecting drill drifts 200mm, bearing different type deep groove ball bearing 25mm, lift-up heavy duty steel wire rope sling eye and eye single body 5mm dia 250 kg capacity galvanised finish durable lifting and rigging sling 8mm, bearing puller three legs 2-3joy, pulley extractor, 4 inch 100mm stable and 2 jaw gear puller for machinery repair, soft face hammer with handle hand tools for professionals 250 gm, high speed steel aviation tin snip 250mm, gauge type go no go snap go no go type single ended tolerance class inspection handle type plain 25-50mm, stainless steel bore depth checking plug gauges 5-55mm, telescopic gauge bore gauge, 6 pack hole gauge set, premium steel t-bore hole gauges set, measurement tool, telescoping full round bore gauge 8-15mm, display type analog material stainless steel packaging type box size 300mm dimension 300 mm (length) features shockproof dial indicator, depth gauge micrometer type analog range 0-25mm accuracy 0.004mm material stainless steel resolution 0.01mm, digital micrometer outside electronic precision measuring instrument for metal and engineering use 0-25, comparators gauge dial indication with stand and bracket. 0.01mm, engineer steel try square - 150 mm 6 inch perfect 90 degree high grade, surface roughness comparison chart, sa31 n1-n12 grade, manual pipe bending machine 25 mm heavy duty round pipe bender, pedastel type grinding machine motor 2hp 1.5kw power 3phase 440 volts 50hz rpm 2800 wheel size 300dia shaft dia 25mm, hexa frame wing nut 12inch best tools you can depend upon made on cnc machine as per specification right choice for everyone bolt and nut used for multiple hacksaw frames, file square secound cut 250 mm for plastic laminate edge finishing grade high carbon hardened steel, file flat bastard 300mm for plastic laminate edge finishing grade high carbon hardened steel, stake grooving 100x100x300 mm for plastic laminate edge finishing grade high carbon hardened steel
Agency / Dept :
directorate general of training
Due Date :
Jun 18, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Bevel Square. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Bevel Square sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Bevel Square Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Bevel Square, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Bevel Square Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Bevel Square Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Bevel Square.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Bevel Square depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Bevel Square Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Bevel Square bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Bevel Square. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Bevel Square, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Bevel Square, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Bevel Square?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Bevel Square tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Bevel Square?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Bevel Square, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Bevel Square is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All