Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

5Latest Air line operator Tenders List

Latest Air line operator Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Air line operator tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Air line operator tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Air line operator Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Air line operator tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Air line operator Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Air line operator Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Air line operator Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Air line operator tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Air line operator Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Air line operator sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Air line operator tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Air line operator tenders.

Is EMD mandatory for all Air line operator tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Air line operator work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Air line operator tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Air line operator Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16975864
Source : GEM Tenders
NEW TENDER
tender for procurement of hydraulic spares for wagon tippler heater sc210310051 , hydraulic vane pump st030090408 , hydraulic axial piston pump cs010250015 , accumulator st030090398 , hydraulic pump st030090410 , hydraulic cylinder st030090404 , hydraulic cylinder st030090405 , hydraulic drive cs010250014 , hydraulic cylinder st030090409 , hydraulic cylinder st030090403 , flow divider st030090402 , air oil cooler sc210260112 , oil level indicator st030090407 , drain valve sc110471675 , air breather st030090399 , float switch st060501101 , return line filter st030250059 , return line filter st030250060 , temperature gauge st060501110 , limit switch st060501106 , logic catridge valve sc110471678 , pressure relief valve sc110471676 , directional control valve st060101443 , pressure gauge isolator valve st030250061 , pressure gauge st060501097 , pressure gauge st060501098 , pressure gauge st060501099 , pressure reducing valve sc110471677 , pilot operated check valve sc110290129 , pressure filter st030250062 , directional control valve st060101440 , pilot operated check valve sc110290127 , directional control valve st060101441 , double throttle check valve sc110290128 , pressure relief valve sc110471674 , flow control valve st060501100 , proportional solenoid coil st060501108 , clog switch st060501105 , hand pump st030090397 , closed loop hydraulic axial piston pump cs010250018 , hydraulic vane pump st030090390 , hydraulic pump st030090412 , hydraulic motor with brake sc050260470 , hydraulic cylinder for arm hoist st030090396 , hydraulic cylinder for arm latch st030090395 , gear box cs010060067 , float switch st060501102 , unloading relief valve sc110471673 , throttle check valve sc110290125 , pilot operated check valve sc110290126 , flow control valve st060101439 , proportional solenoid coilst060501108 , closed loop hydraulic axial piston pump cs010250017 , closed loop hydraulic axial piston pump cs010250019 , air oil cooler sc210260111 , hydraulic motor cs010090018 , hydraulic motor cs010090017 , hydraulic pump st030090389 , electric motor sc050260469 , hydraulic gear pump st030090394 , air breather st030100669 , float switch st060501107 , temperature sensor rtd st060501104 , charge filter st030250058 , pressure gauge range 0-400 bar st060501103 , hydraulic pump st030250064 , hydraulic pump st030250056 , gear pump st030250052 , boom luffing hydraulic cylinder cs010250016 , gate adjustment main chute hyd cyliner st030250051 , gate adjustment bucket wheel hyd cyliner st030250050 , belt take up hyd cylinder st030250046 , air oil cooler st030250042 , directional control valve st030250045 , two way flow control valve st030250043 , hose burst valve st030250054 , pressure gauge st060501111 , seal kit for the hydraulic motor for wt drive hmb 25 along with brake seal st030100675 , seal kit for the hydraulic motor for sac drive hmb 2 along with brake seal st030100676 , seal kit for hydraulic motor for slew drive - hmb 17.5 along with the brake seal st030100674 , complete seal kit for hydraulic motor for bucket wheel drive - hma 75 st030100681 , seal kit for hydraulic pump 250 cc for wt drive, sac, bucket wheel st030100679 , seal kit for hydraulic pump 165 cc for bucket wheel st030100680 , seal kit for hydraulic pump 78 cc for slew drive st030100678 , seak kit for top clamping cylinder 140 x100 x 1800 mm st030100673 , seak kit for side pad cylinder 125x90x450 mm st030100677 , seak kit for wheel gripper cylinder 63x36x350 mm st030100672 , seak kit for wheel chocker cylinder 63x36x600 mm st030100684 , seak kit for arm hoist cylinder 125x70x1300 mm st030100686 , seak kit for arm latch cylinder 40x22x100 mm st030100685 , seal kit for boom luffing cylinder 280 x 180x 2050 mm st030100683 , seal kit for gate adjustment main chute cylinder 50 x 28 x 220 mm st030100688 , seal kit for gate adjustment bucket chute cylinder 50 x 28 x 186 mm st030100689 , seal kit for belt take up cylinder 180x110x1500 mm st030100682 , seal kit for operator, as per technical specification
T18 Ref No : 16933407
Location : koraput , odisha
Source : GEM Tenders
LIVE TENDER
corrigendum tender for e 143502 spares and consumables for komatsu ripper dozer and motor grader - 1 . 70108121240 coupling assy 07332-03000 for komatsu d475a5 and eo dozer , 2 . 70250000130 hose hyd pump delivery 02765-005a7 for komatsu d475a5 and eo dozer , 3 . 70250000140 hose hyd ripper controle 198-61-61571 for komatsu d475a5 and eo dozer , 4 . 70250000150 hose hyd ripper controle 198-61-61580 for komatsu d475a5 and eo dozer , 5 . 70250000300 track roller assy single flange p.no198-30-00541for komatsu d475a5 and eo dozer , 6 . 70250000310 track roller assy double flange p.no198-30-00551for komatsu d475a5 and eo dozer , 7 . 70250000610 cushion p.no.198-54-61821for komatsu d475a5 and eo dozer , 8 . 70250001040 track rollar single flange d475a-5e0 part no. - 198-30-00680 for komatsu d475a5 and eo dozer , 9 . 70250007850 o-ring pn07002-21423 for komatsu d475a5 and eo dozer , 10 . 70250007910 o-ring pn02896-21015 for komatsu d475a5e0 dozer , 11 . 70250031660 rubber ptno 1981241180 for komatsu d475a5 and eo dozer , 12 . 70250031730 seal ptno 1981211240 for komatsu d475a5 and eo dozer , 13 . 70250032850 shoe ptno 1983231111 for komatsu d475a5 and eo dozer , 14 . 70250039280 sprocket 198-27-42260 for komatsu d475a5 and eo dozer , 15 . 70250050360 sprocket nut 01803-03034 for komatsu d475a5 and eo dozer , 16 . 70250061340 hose fuel pt.no. 07102-20610 for komatsu gd825a motor grader , 17 . 70250102310 hose 209-04-77630 for komatsu d475a5 and eo dozer , 18 . 70250102350 knob 195-54-68760 for komatsu d475a-5 dozer , 19 . 70250103040 seat assly- d475a part no. 198-57-65590 for komatsu d475a5e0 ripperdozer , 20 . 70250104650 turbo bolt part no 6151-11-8550 for d475a5e0 komatsu dozer , 21 . 70250110060 belly guard bolt d475a-5 part no. 01010-81640 for komatsu d475a5 and eo dozer , 22 . 70250145200 ripper point by tip pt. no. 198-78-21370i for d475a-5 e0 ripper dozer. , 23 . 70250203780 seal kit eo pn707-98-11350 for komatsu d475a-5e0 dozer , 24 . 70250204370 hose e0 pn198-61- 61991 for d475a-5e0 komatsu dozer , 25 . 70250212010 button-23d 9504450 for komatsu d475a5 and eo dozer , 26 . 70250212230 cable- brake d475a p.n. 101-961- 5150 for komatsu d475a5 and eodozer , 27 . 70250286370 cushion 198-01-31121 for komatsu d475a5 and eo dozer , 28 . 70250286440 cushion 19801-31220 for komatsu d475a5 and eo dozer , 29 . 70250290160 aftercooler e0 pn198-03-75590 for komastu d475a5eo model dozer , 30 . 70250290230 gasket 07332-51400 for komatsu d475a5 and eo dozer , 31 . 70251000050 operator seat assy p.no.195-57-46200 for komastu d475a5 dozer havingequipment serial no20156 and 20164. , 32 . 70251000130 bolt matser link p.no. 198-32-31341 for komatsu d475a-5 dozer , 33 . 70251000140 bolt idler cap p.no.19m-09-12851 for komatsu d475a-5 dozer , 34 . 70251000220 cap radiator upper tank p.no.201-03-51310 for komatsu d475a5 and eodozer , 35 . 70251000600 link track lh p.no.198-32-37122 for komatsu d475a5 and eo dozer , 36 . 70251000610 link track rh p.no.198-32-37132 for komatsu d475a5 and eo dozer , 37 . 70251000640 seal assy p.no.198-32-31302for komatsu d475a5 and eo dozer , 38 . 70251000660 bushing p.no.198-32-31442 for komatsu d475 dozer , 39 . 70251000710 carrier roller assy p.no.198-30- 00571for komatsu d475a5 and eo dozer , 40 . 70251000730 shoe bolt and nut kit p.no.198-32-05030 each item contains 30 bolts and 30 nutsfor komastu d475a5 and e0 model ripper dozer , 41 . 70251001060 o ring p.no.07002-22434 for komatsu d475a5 and eo dozer , 42 . 70251001110 o ring p.no.07000-72110 for komatsu d475a5 and eo dozer , 43 . 70251001150 cushion p.no.198-54-61832for komatsu d475a5 and eo dozer , 44 . 70251001210 pin p.no.198-78-21150for komatsu d475a5 and eo dozer , 45 . 70251001420 washer p.no.01643-70823 for komatsu dozers , 46 . 70251001570 clamp pt.no. 07289-00170 for komatsu d475a5 and eo dozer , 47 . 70251010200 track tensioner bushing part no. 198-30-31220 by 21 , 48 . 70251010240 clamp pt.no. 6215-11-4680 for komatsu d475a5 and eo dozer , 49 . 70251014310 hose pt.no. 198-03-51451 for komatsu d475a5 and eo dozer , 50 . 70251014620 hose pt.no. 198-03-62731 for komatsu d475a5 and eo dozer , 51 . 70251014790 hose pt.no. 198-03-62790 for komatsu d475a5 and eo dozer , 52 . 70251014860 oring pt.no. 07000-73045 for komatsu d475a5 and eo dozer , 53 . 70251014930 o-ring pt.no. 07000-73048 for komatsu d475a5 and eo dozer , 54 . 70251016000 hose pt.no. 07298-012a6 for komatsu d475a5 and eo dozer , 55 . 70251016240 hose pt.no. 198-49-62540 for komatsu d475a5 and eo dozer , 56 . 70251016930 hose pt.no. 198-61-61831 for komatsu d475a5 and eo dozer , 57 . 70251017050 hose pt.no. 198-61-61841 for komatsu d475a5 and eo dozer , 58 . 70251017670 hose pt.no. 198-61-61440 for komatsu d475a5 and eo dozer , 59 . 70251017810 hose pt.no. 07098-01213 for komatsu d475a5 and eo dozer , 60 . 70251018930 hose pt.no. 07089-01007 for komatsu d475a5 and eo dozer , 61 . 70251050190 engine oil filter 600-211- 1340 for komatsu d475a5 and eo dozer , 62 . 70251050260 trans oil filter 07063-51142 for komatsu d475a5 and eo dozer , 63 . 70251050330 o ring 07000-e5165 for komatsu d475a5 and eo dozer , 64 . 70251050710 corrosion filter catridge 600-411- 1171 for komatsu d475a5 and eodozer , 65 . 70251050880 corrosion filter catridge 600-411-1151 , 66 . 70251050950 hyd oil filter 208-60-71122 for komatsu d475a5 and eo dozer , 67 . 70251051140 air cleaner element inner 600-185-6100 for komatsu d475a5 and eodozer , 68 . 70251051210 air cleaner element outer 600-185-6110 for komatsu d475a5 and eodozer , 69 . 70251051381 compressor v belt pt no04120-21750 for komatsu d475a5 and eo dozer , 70 . 70251212200 fuel pre filter cartridgepn 600-319-4540 for komatsu d475a5 and eo dozer , 71 . 70251212210 hyd.tank breather elempn421-60-35170 for komatsu d475a5 and eo dozer , 72 . 70252220000 o ring hydraulic control valve d475a-5 part no. 07000- 12012 , 73 . 70252220010 o ring hydraulic control valve d475a-5 part no. 723-11-19130 , 74 . 70252220030 o ring hydraulic control valve d475a-5 part no. 07000-12021 , 75 . 70252220040 o ring hydraulic control valve d475a-5 part no. 07000-13028 , 76 . 70252220050 o ring hydraulic control valve d475a-5 part no. 07000-13032 , 77 . 70252220060 o ring hydraulic control valve d475a-5 part no. 723-46- 17510 , 78 . 70252220070 o ring hydraulic control valve d475a-5 part no. 07000-13036 , 79 . 70252220080 o ring hydraulic control valve d475a-5 part no. 723- 46-17530 , 80 . 70252220090 o ring hydraulic control valve d475a-5 part no. 723-11-18150 , 81 . 70252221490 o-ring gd825a-2 pn 07000-72115 for komatsu gd825amotor grader , 82 . 70255101000 water separator gasket gd825a-2 part no . 600-311-9961 for komatsugd825a motor grader , 83 . 70258781020 water separator to fuel filter line hose d475a-5e0 02762- 00558i forkomatsu d475a5eo dozer , 84 . 70258781320 fuel tank line hose d475a-5e0 02763-00511i for komatsu d475a5eo dozer , 85 . 70258787970 hose blade tilt cyliner 198-71-62131 for komatsu d475a5 and eo dozer , 86 . 70258788380 muffler 6215-11-7420 for komatsu d475a5e0 ripper dozer , 87 . 70259125530 seal e0 pn198-12-41330 for komastu d475a5eo model dozer , 88 . 70259125550 aftercooler damper e0 pn135-03- 12110 for komastu d475a5eo model dozer , 89 . 70259125560 o-ring e0 pn07000-e5370 for komastu d475a5eo model dozer , 90 . 70259125590 fan pump hose e0 pn02763-00518 for komastu d475a5eo model dozer , 91 . 70259125920 cushion eo pn 14x-60-12120 for komatsu d475a5eo dozer , 92 . 70259125930 o ring eo pn 07000-03025 for komatsu d475a5eo dozer , 93 . 70259127900 master bolt e0 pn198-32-31342 for komstsu d475a5eo model ripper dozer , 94 . 70259127910 master shoe e0 pn198-32-16143 for komstsu d475a5eo model ripper dozer , 95 . 70259127920 master link kit lh pn198-32-08314 for komstsu d475a5eo model ripperdozer , 96 . 70259127930 master link kit rh pn198-32-08324 for komstsu d475a5eo model ripperdozer , 97 . 70259127940 hose e0 pn02762-00307for komatsu d475a5 and eo dozer , 98 . 70259127950 hose e0 pn20y-62-42160 for komatsu d475a5eo dozer , 99 . 70259127960 screw e0 pn01023-10520 for komatsu d475a5eo dozer , 100 . 70259127970 bolt eo pn01011- 81265 for komatsu d475a5e0 ripper dozer , 101 . 70259127980 washer eo pn01643-31232 for komatsu d475a5e0 ripper dozer , 102 . 70259127990 pin eo pn6215-81-6150 for komatsu d475a5e0 ripper dozer , 103 . 70259128000 nut eo pn01580-11210 for komatsu d475a5e0 ripper dozer , 104 . 70259128010 ppc valve blade e0 eo pn702-16-06161 for komatsu d475a5e0 ripperdozer , 105 . 70259128020 ppc valve ripper e0 eo pn702-16-05240 for komatsu d475a5e0 ripperdozer , 106 . 70259205024 ring 19m-30-14170 for d475a-5eo komtasu dozer , 107 . 70259205025 packing 19m-30-14180 for d475a-5eo komtasu dozer , 108 . 70259205030 o-ring pn07000-75330 , 109 . 70259205480 blade tilt seal kit eo pn721-98-00340 for komastu d475a5eo model dozer , 110 . 70259205600 washer pn 567-54-11630 for d475a5eo komtasu dozer , 111 . 70259205610 o-ring pn 198-09- 45560 for d475a-5eo komtasu dozer , 112 . 70259205640 o-ring pn 02896-21012 for d475a-5eo komtasu dozer , 113 . 70259205910 key pn 19m-32-11450 d475a5e0 dozer , 114 . 70302867100 seal washer 0700501412 for komatsu d475a5 and eo dozer , 115 . 70352000180 fan belt 04121-22570 for komatsu gd825a motor grader , 116 . 70352000280 service kit ripper lift cylinderp.no707-99-75600 for komatsu d475a5 and eo dozer , 117 . 70352000290 service kit ripper tilt cylinder p.no707-99-77620 for d475a-5 ripperdozers , 118 . 70352000500 hose p.no.07121-40209 for komatsu gd825a motor grader , 119 . 70352000530 hose p.no.07103-50412 for komatsu gd825a motor grader , 120 . 70352000550 service kit k2 brake valve 235-44- 12910 for komatsu gd825a motor grader , 121 . 70352003260 gasket pt.no. 6151-51-8151 for komatsu d475a5 and eo dozer , 122 . 70352004520 gasket kit pt.no. 6212-k6-99010 for komatsu gd825a motor grader , 123 . 70352004690 gasket kit pt.no. 6212-k8-9900 for komatsu gd825a motor grader , 124 . 70352009190 hose pt.no. 07102-20612 for komatsu gd825a motor grader , 125 . 70352009260 hose pt.no. 07121-40411 for komatsu gd825a motor grader , 126 . 70352009330 hose pt.no. 07121-40210 for komatsu gd825a motor grader , 127 . 70352009400 hose pt.no. 07121-40204 for komatsu gd825a motor grader , 128 . 70352009570 hose pt.no. 235-60-35230 for komatsu gd825a motor grader , 129 . 70352009950 hose pt.no. 07121-00305 for komatsu gd825a motor grader , 130 . 70352010250 air dryer service kit gd825 pn 235-44-11780 for komatsu gd825 motorgrader , 131 . 70352010280 cushion gd825 pn235- 01-11110 for komatsu gd825a motor grader , 132 . 70352010290 cushion gd825 pn234-01-41120 for komatsu gd825a motor grader , 133 . 70352010300 hose gd825 pn07121-00204 for komatsu gd825a motor grader , 134 . 70352010310 cv hose gd825 pn07103-50205 for komatsu gd825a motor grader , 135 . 70352010320 hose gd825 pn07121-40304 for komatsu gd825a motor grader , 136 . 70352010330 hose gd825 pn235-60-33730 for komatsu gd825a motor grader , 137 . 70352010340 hose gd825 pn07103-50308 for komatsu gd825a motor grader , 138 . 70352010350 hose gd825 pn07121-40312 for komatsu gd825a motor grader , 139 . 70352010360 hose gd825 pn07121-00360 for komatsu gd825a motor grader , 140 . 70352010370 hose gd825 pn07121-40336 for komatsu gd825a motor grader , 141 . 70352010380 hose gd825 pn07121-40309 for komatsu gd825a motor grader , 142 . 70352010390 hose gd825 pn235-60-34430 for komatsu gd825a motor grader , 143 . 70352010400 hose gd825 pn235-60-40305 for komatsu gd825a motor grader , 144 . 70352010410 hose gd825 pn07121-40412 for komatsu gd825a motor grader , 145 . 70352010420 hose gd825 pn07121-00460 for komatsu gd825a motor grader , 146 . 70352010430 hose gd825 pn07121-00316 for komatsu gd825a motor grader , 147 . 70352010440 hose gd825 pn07102-20439 for komatsu gd825a motor grader , 148 . 70352010450 hose gd825 pn07103-50420 for komatsu gd825a motor grader , 149 . 70352010460 hose gd825 pn07121-40310 for komatsu gd825a motor grader , 150 . 70352010480 gasket gd825 pn6211-11- 5890 for komatsu gd825a motor grader , 151 . 70352010490 connector gd825 pn6211-11-5780 for komatsu gd825a motor grader , 152 . 70352010500 gasket gd825 pndk029341-4130 for komatsu gd825a motor grader , 153 . 70352010510 gasket gd825 pn600- 311-9731 for komatsu gd825a motor grader , 154 . 70352010520 bolt gd825 pndk152300-5920 for komatsu gd825a motor grader , 155 . 70352010540 fd gasket gd825 pn235-22-11120 for komatsu gd825a motor grader , 156 . 70352010550 spring gd825 pn232-43-12360 for komatsu gd825a motor grader , 157 . 70352010560 spring gd825 pn23a-45-12220 for komatsu gd825a motor grader , 158 . 70352010570 air dryer service kit gd825 pn235-44-11780 for komatsu gd825a motorgrader , 159 . 70352010580 o-ringcv gd825 pnuc1301148002 for komatsu gd825a motor grader , 160 . 70352010590 o-ringcv gd825 pnuc1301169009 for komatsu gd825a motor grader , 161 . 70352010600 o-ringcv gd825 pnuc1300149004 for komatsu gd825a motor grader , 162 . 70352010610 o-ringcv gd825 pnuc1300170008 for komatsu gd825a motor grader , 163 . 70352010620 shimcv gd825 pnuc1178286401 for komatsu gd825a motor grader , 164 . 70352010630 o-ringcv gd825 pnuc1301174001 for komatsu gd825a motor grader , 165 . 70352010640 o-ringcv gd825 pnuc1301148002 for komatsu gd825a motor grader , 166 . 70352010650 oringcv gd825 pnuc1301196001 , 167 . 70352010660 oringcv gd825 pnuc1303028496 for komatsu gd825a motor grader , 168 . 70352010670 packingcv gd825 pnuc1100028765 for komatsu gd825a motor grader , 169 . 70352010680 ring backupcv gd825 pnuc1303006919 for komatsu gd825a motor grader , 170 . 70352010690 ringcv gd825 pnuc1179043407 for komatsu gd825a motor grader , 171 . 70352010700 ringcv gd825 pnuc1179043508 for komatsu gd825a motor grader , 172 . 70352010710 sealcv gd825 pnuc1100303919 for komatsu gd825a motor grader , 173 . 71050001720 cover part no - 600-184-1632i for komatsu d475a5 and eo ripperdozer , 174 . 71050002690 o ring 07000-33028 for komatsu wheel loader model wa700-3 , 175 . 71050007790 o ring 07000- f3035for komatsu d475a5 and eo dozer , 176 . 71050042211 clamp 07289-00105 for komatsu d475a5 and eo dozer , 177 . 71050124500 cartrige part no. -600- 319-3550 for komatsu d475a5 and eo dozer , 178 . 72503012560 water separator 600-311-9330 for d475a-5e0 dozer , 179 . 93850625710 gear oil g085w140part no-syzz-gelco5140 suitable for d475a-5 and d475a-5e0 komatsu dozer
T18 Ref No : 15792767
Location : varanasi , uttar pradesh
Source : GEM Tenders
tender for o and m with aicmc of hvac and vrv system at varanasi airport title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50, o and m with aicmc of hvac and vrv system at varanasi airport, operation and routine maintenance of water cooled chiller hvac system, 3x500tr i/c ahus and cooling tower, vrv system at various locations inside the terminal building and medical centre, various pumps and other installation of wtp and stp, ro, water coolers and split/tower/window ac units at various locations, water fountains inside the terminal building, ensuring serviceability/ satisfactory working condition of the systems i/c maintenance of records/logbook/ documents etc. on all days i/c saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following min. no. of man power- (a) supervisor (highly skilled) - 01 no. (i.e. 01 no. in general shift on 06 days in every week) (b) ac technician / mechanic (skilled) - 03 nos. (ie 01 no. round the clock on all days in every week for operation of chiller, reliever shall be provided on weekly off). (c) ac technician / mechanic (skilled) - 02 nos. (ie 02 no. in general shift on all days in every week for operation and routine maintenance of r.o., water coolers and split/tower/window ac units at various locations, reliever shall be provided on weekly off). (d) asst. ac mechanic cum operator (semi skilled) - 09 nos. (i.e. 01 no. round the clock for operation of ahu, 01 no. round the clock for operation and maintenance of wtp, 01 no. round the clock for operation of stp on all days in every week, reliever shall be provided on weekly off). (e) asst. ac mechanic cum operator (semi skilled) - 01 no. (i.e. 01 no. in general shift for maintenance of stp, reliever shall be provided on weekly off). (f) helper (unskilled) - 03 nos. (i.e. 01 no. round the clock on all days in every week for hvac, reliever shall be provided on weekly off). (g) helper (unskilled) - 02 nos. (ie 02 no. in general shift on all days in every week for operation and routine maintenance of ro, water coolers and split/tower/window ac units at various locations, reliever shall be provided on weekly off)., operation and routine maintenance of vrv system at ats cum technical block and precision air conditioning system at new mssr building including maintenance of records/logbook/ documents etc. on all days including saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following minimum number of man power - (a) supervisor (highly skilled) - 01 nos. (i.e. 01 no. in general shift on 06 days in every week) (b) ac technician / mechanic (skilled) - 01 nos. (i.e. 01 no. in general shift on all days in every week for operation and routine maintenance of vrv system at ats cum technical block and pac system at new mssr building, reliever shall be provided on weekly off). (c) asst. ac mechanic cum operator (semi skilled) - 06 nos. (i.e. 01 no. round the clock for operation and routine maintenance of vrv system in ats block and 01 no. round the clock for operation and routine maintenance of pac system at new mssr building on all days in every week, reliever shall be provided on weekly off)., operation and routine maintenance of packaged air conditioning system at old mssr building including maintenance of records/logbook/ documents etc. on all days including saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following minimum number of man power - (a) asst. ac mechanic cum operator (semi skilled) - 03 nos. (i.e. 01 no. round the clock for operation and routine maintenance of packaged air conditioning system at old mssr building on all days in every week, reliever shall be provided on weekly off)., annual all inclusive comprehensive maintenance contract of central ac plant (hvac) for 3x500tr (make- mcquay) centrifugal chiller type comprising of 3 no. cooling tower (make- advance) and 1no cooling tower (make- bell) with make-up tank, associated pumps as condenser water pump - 03 no(40hp), primary water pump - 03no (25hp), secondary water pump 12 hr - 03 no. (25hp), secondary water pump 24hr- 03 no. (15hp) with 06 no vfd with secondary pumps, hot water generator of 400kw (01 no) with in build panel for 8 zones , air handling unit (floor mounted) - 19 no. up to 100 tr and min 50tr capacity with 08 no vfds, ceiling suspended air handling unit - 17 no up to 3 to 5 tr with electrical starter panel in each hru 03 no of 4250 cmh, 4675 cmh, 2754 cmh with their electrical panels, ac risers - 82 no. with nozzles with respective ahus, ozone system of 06no of make- ruks canada ltd, electrical panel in plant room p1 , p2 and p3 for the operation of chillers, hot water generator and all associated pumps, water softening plant its electrical panel and pumps. above system complete including chiller pipe line, ac duct, grills diffusers, valves, gas charging, winding of motors, displays, instrumentations etc. complete as required related with hvac system. (the supply of consumable spares as mentioned in item-24 to 27 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive periodical maintenance of daikin make vrv system installed at new atc tower ,technical block and substation having total of 143 nos. vrv indoor units including ductable, high wall and cassette units of different capacities. total of outdoor units clubbed in 3 or 2 units together - 12 sets of total capacity of odu - 492 hp. maintenance work is inclusive of all spares required for repair, maintenance as per manufacturer schedule, servicing including routine preventive maintenance, breakdown maintenance including repair/replacement of compressor, electronic circuit board, mechanical equipment, safety controls and instrumentations, gas charging, fan , fan motors, thermal insulation, drain pumps, remote control console/units etc. ensuring serviceability/ satisfactory working condition of the system, maintenance of recordes/documentation etc. as per tender conditions covered under this contract on all days including saturday,sunday and holiday etc. as required., annual all inclusive comprehensive maintenance contract of 144hp vrv air-conditioning system installed in security hold area and passenger boarding bridge fixed finger (16hp - 09 set outdoor units model no-jrnu160lte5.apune, 4 tr- 16 set cassette type indoor units model number-jrnu48gtma4.apune, 6.3 tr - 04 set ductable type indoor units model number-jrnu76gb8a4.apune, makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed in airlines/aai offices in departure area inside terminal building (20hp - 01 set outdoor units model no- ivrfb-20th, 1.7 tr- 10 set cassette type indoor units model number-vlc-20, makes-bluestar) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. upto 1.5 tr window/split ac, annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares, including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. (2tr split/cassette/tower ac), annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares, including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. (3.0 tr split/tower type ac), annual comprehensive maintenance of water coolers of all type, makes and capacities with providing necessary consumables, spares, compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers wherever connected etc. complete as required., annual comprehensive maintenance of water purifiers of aqua guard make including replacement of all defective components like uv lamp etc. and consumables and carrying out bimonthly servicing at installed position etc. complete as required.(the supply of consumable spares filters as mentioned in item no-40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive maintenance of ro up to 50 liter capacity including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39 and 40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive maintenance of ro above 50 up to 100 liter capacity including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39and40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), all inclusive comprehensive maintenance of 3 units each of 2x8tr capacity packaged air-conditioning plant installed at old mssr building (make - bluestar) including replacing defective components, carrying out preventive and breakdown maintenance like arresting of leakage, topping up of refrigerant gas, lubrication, rewinding/ replacing of all type of motors, repairing/ replacing of compressors, repairing / replacing of electrical components etc and other works required from time to time for proper maintenance of units including maintenance of records as per terms and condition all days including sundays and holidays., annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed at conference room and adjacent offices in terminal building including 2x 10hp outdoor units, 7x 2tr cassette type indoor units, make-daikin including compressor and providing all necessary consumables, refrigerant gas, piping, cabling etc., complete as per site requirement and special conditions and general terms and conditions of contract as required., annual all inclusive comprehensive maintenance contract of 36hp vrv air-conditioning system installed in passenger boarding bridge fixed link ( 1x 18 hp-02 set outdoor units model no-jrun180lls4, 4x 3tr-02set cassette type indoor units model number-rnu36gtna4, makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 40hp vrv air-conditioning system installed in passenger boarding bridge fixed finger (1x 20hp-02 set outdoor units model no-jrun200lls4, 4x 3tr-02set cassette type indoor units model number-jrnu36gtna4 , makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 36hp vrv air-conditioning system installed in new fire station medical centre ( 3x 12 hp outdoor units, model no.-map1206ht8d-xa,cassette type indoor units 9x 2 tr, model no.- mmu-up0241hp-e and 3x1.5 tr, model no.-mmu-up0181hp-e make-toshiba) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of cold storage 40000 btu-02 set (make- bluestar) by providing quarterly visit and any number of break down as and when required including replacing/repairing compressor, condenser coil, temperature controller and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 3 x 15 tr (3 sets each of 01 no. indoor unit and 02 no. outdoor units) floor mounted, bottom discharge, top suction, air cooled dx type crac precision air-conditioning system units installed in new mssr building suitable to maintain equipment room temperature at 18 deg c plus minus 2 deg c (1x 15 tr - 03 set indoor units model no-pdx px054d, 2 no. x 03 set outdoor units model number-hcr-43 , makes-vertiv) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual comprehensive maintenance of drinking water fountain with chilling water fountain one at higher level and another at lower level to match disability compliance make oasis/haws/wae including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39 and 40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), cleaning of the solar module regularly two cycle in a month including minor repairing of tulu pump and monitoring of 600 kwp (500kwp+100kwp)grid connected roof top mounted solar photo voltaic power plant by deploying minimum one number unskilled man power in general shift excluding weekly off including maintaining records as per special conditions of the contract and as per direction of e-i-c. (consumables cleaning material like wiper duster, pvc flexible pipe etc. are to be provided by the agency. the solar module are under warrantee whereas inverter to be maintained by oem. the agency has to liaison with oem for repairing/replacement of defective parts)., supply of spares for hvac not include in cmc item no. 4 (pvc fills 600x300x150mm), supply of spares for hvac not include in cmc item no. 4 (resin 220 na(o) for softener plant), supply of spares for hvac not include in cmc item no. 4 (salt for softener plant), supply of spares for hvac not include in cmc item no. 4 (chlorine for dosing in stp), supply and installation of copper tubing of suitable size up to 3tr split air-conditioning for inlet and outlet of refrigerant gas complete with electrical cabling and insulation etc. complete as required during shifting of existing ac units., supply and installation of 20 mm dia pvc rigid drain pipe i/c all accessories like bends, couplers, tees etc. complete as required during shifting of existing ac units., supply and fixing of insulation of nitrile rubber in existing copper tubing for both inlet and outlet of existing installed air conditioner etc. complete as required during shifting of existing ac units as per direction of eic., dismantling of high wall split type air-conditioning unit, shifting, re-installation, testing and commissioning of capacity up to 3.00 tr air-conditioner units, fixing of existing refrigerant pipe, insulation and existing flexible copper conductor cable between evaporator and condenser units, topping up refrigerant gas etc. complete as required as per direction of eic., rewinding of 10/15 hp motor of submersible pump of (different stages ) different makes as per original size of insulated copper wire, sleeves complete with connection, interconnection etc as required., repairing of 10/15 hp submersible pump and motor (excluding rewinding of motor) of different stages and different makes i/c replacement of bearing bush, neck rings, bowl bush, running sleeve, key full, sand guard complete etc as required., repairing and rewinding of the existing water pump/ sewerage pump motor of capacity 0.75 hp to 3.0 hp by dismantling from its position, transportation to the work shop, bringing back to the airport after repairing and rewinding, reinstallation the same, including testing and make the system in serviceable condition as required., repairing and rewinding of the existing blower motor/ filtered feed pump etc. of capacity 5 hp to 7.5 hp by dismantling from its position, transportation to the work shop, bringing back to the airport after repairing and rewinding and reinstallation the same, including testing and make the system in serviceable condition as required., testing of stp incoming and treated water sample on quarterly basis from reputed govt. lab and submission of test reports as per technical specifications.(rate for each sample), dismantling, removal, lowering, reinstalling, testing and commissioning of submersible pumps of different makes and capacities including arranging of tripod stand, chain pulley block etc. as required., supply of 3.7 kw/ 5.0 hp submersible pump-motor set suitable for discharge 80mm delivery of minimum 250 lpm against static head 45mtr consisting of multistage pumps with suitable motor suitable for operation on 415 volt, 50 hz a/c supply. pumps and motors must be connected with alignment shafts etc. complete as required., supply of shield membrane which is not included in cmc of ro / water purifier / water fountains as mentioned in item no-13,14 and 22 suitable for kent/ aqua guard/oasis/haws/wae up to 100 liter capacity etc. complete as required., supply of carbon / sediment filter which is not included in cmc of ro / water purifier / water fountains as mentioned in item no-12,13,14 and 22 suitable for up to 100 liter capacity etc. complete as required., drinking water potability test quarterly basis as per technical specifications (rate for each sample)., supply of consumable urea for equalization tank of stp., supply of sand for sludge drying bed at stp., repairing/replacement of blower pipe tube at stp with suitable size pipe, elbow,socket and flange complete as required., supply of air blower filter at stp compatible to existing air blower., supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part -ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 300 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part- ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 250 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part-ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 200 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part-ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 150 mm dia, annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed at pm safe house including 2x 10hp outdoor units with 6 x 2 tr, 2 x 1.5 tr and 1 x 1.1 tr high wall type indoor units, make-hitachi including compressor and providing all necessary consumables, refrigerant gas, piping, cabling etc., complete as per site requirement and special conditions and general terms and conditions of contract as required.

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
T18 Ref No : 16088958
Location : pune , maharashtra
Source : GEM Tenders
tender for proc of mt spares 10589454 lv7 av 15 485 hc 11149 head cylinder , 10367427 lv7 av 15 578 003 910 952 28 axle suspension , 10314054 lv7 t 815 993 050 140 0 retainer gear , 10322857 lv7 t 815 573 911 390 6 s930588 1 manomtr of servo strg , 10312717 lv7 t 815 993 300 023 0 driven gear wheel , 10318440 lv7 t 815 292 201 769 4 front mudguard rh , 10337008 lv7 t 815 443 400 398 0 flash beacon klx7000fl , 10322409 lv7 t 815 993 200 102 0 o ring , 10339984 lv7 t 815 345 510 009 0 side direction lamp 5w , 10318426 lv7 t 815 292 201 768 4 front mudguard lh , 10314106 lv7 t 815 207 036 007 4 exchanger output neck , 10328077 lv7 t 815 443 311 007 5 fog headlamp waterning asymetric , 10321075 lv7 t 815 993 050 020 0 injector , 10319431 lv7 t 815 990 300 613 0 bearing na 4910 v csn 02 4680 , 10317885 lv7 t 815 205 365 269 4 compressor neck m27x2 , 10324039 lv7 t 815 207 901 644 4 cunductor , 10324124 lv7 t 815 207 902 475 4 bundle cable abs hinder , 10319666 lv7 t 815 201 694 049 4 rear gear change rod , 10326849 lv7 t 815 207 252 002 4 cover , 10322545 lv7 t 815 993 050 542 0 hose flaxible , 10314640 lv7 t 815 207 111 215 4 gear shift lever , 10316761 lv7 t 815 207 661 384 4 indicator line , 10322851 lv7 t 815 573 911 420 6 urn 0202 1 wrench for nut 442020870164 , 10336745 lv7 t 815 443 400 714 0 electro accessories , 10314434 lv7 t 815 993 050 135 0 shaft idler , 10316136 lv7 t 815 207 590 142 4 exhauht silencer , 10318029 lv7 t 815 294 802 180 4 light holder , 10318039 lv7 t 815 993 050 128 0 cover cam shaft , 10321499 lv7 t 815 993 200 814 0 carrier , 10317459 lv7 t 815 207 650 151 4 fuel tank , 10321395 lv7 t 815 993 200 827 0 shaft , 10320974 lv7 t 815 993 050 012 0 spider jaw coupling , 10315728 lv7 t 815 993 050 401 0 support accessory drive m10x1 5x100 , 10337976 lv7 t 815 443 332 042 0 mirrors 59 3601 128 , 10317384 lv7 t 815 202 961 026 4 pulley , 10317497 lv7 t 815 573 911 290 6 prm3432 set of shaft rotating tools , 10317056 lv7 t 815 274 833 020 0 cock spherical 3830 1 4 , 10321698 lv7 t 815 993 200 831 0 retainer bearing assy front , 10320604 lv7 t 815 993 050 554 0 brace air compressor , 10315628 lv7 t 815 993 050 412 0 seal o ring , 10325107 lv7 t 815 993 200 363 0 sensor , 10320696 lv7 t 815 993 200 810 0 spider clutch , 10335153 lv7 t 815 443 332 235 0 rear view mirror rh z320 10004p , 10321531 lv7 t 815 993 200 811 0 hub clutch , 10321618 lv7 t 815 993 200 824 0 shaft clutch , 10319474 lv7 t 815 993 050 471 0 ring coupling , 10319248 lv7 t 815 993 050 190 0 pulley accessory drive , 10320261 lv7 t 815 993 200 777 0 desk , 10316420 lv7 t 815 993 050 332 0 set main bearing , 10320379 lv7 t 815 993 200 783 0 wheel gear , 10316943 lv7 t 815 993 050 349 0 housing axle drive , 10322186 lv7 t 815 205 439 209 4 rubber straight coupling , 10326389 lv7 t 815 443 400 097 0 control unit kzm002 b , 10325407 lv7 t 815 993 200 709 0 clutch hub , 10335364 lv7 t 815 573 910 740 6 prl1301 dvr to press timken brg , 10313890 lv7 t 815 993 200 772 0 cable harness , 10325442 lv7 t 815 993 200 704 0 gear ring drive , 10344663 lv7 t 815 548 615 091 0 tierod 183 m tt 75 5700 , 10320611 lv7 t 815 547 507 050 6 prm 3354 universal puller 47x90x180 0 90 , 10325446 lv7 t 815 993 200 702 0 gear wheel , 10311813 lv7 t 815 547 606 410 6 prm 3337 tool to fix double arm strg , 10319655 lv7 t 815 993 200 778 0 wheel blade , 10317428 lv7 t 815 207 599 018 4 rear leaf spring , 10321625 lv7 t 815 993 200 823 0 housing piston , 10321676 lv7 t 815 993 200 817 0 shaft output assembly front , 10317444 lv7 t 815 993 050 578 0 key plain woodruff , 10317453 lv7 t 815 207 650 139 4 expansion tank , 10325411 lv7 t 815 993 200 708 0 clutch hub , 10325414 lv7 t 815 993 200 707 0 wheel drive ring , 10335627 lv7 t 815 558 106 100 6 prm 2688 tool to set up clearance , 10325741 lv7 t 815 207 116 093 4 acceleration pedal , 10322905 lv7 t 815 207 924 058 4 thermoplastic hose , 10335454 lv7 t 815 573 908 640 6 prm 3143 dvr of outer race of brg , 10312647 lv7 t 815 993 300 009 0 o ring , 10314292 lv7 t 815 993 050 150 0 gear hydraulic pump , 10340077 lv7 t 815 534 905 320 6 prm 0777 universal puller , 10316252 lv7 t 815 207 560 223 4 conneting part , 10340207 lv7 t 815 534 907 300 6 prm 3322 universal extractor , 10313045 lv7 t 8154x4 205 079 120 4 spacer ring , 10331547 lv7 t 8154x4 442 028 513 024 tie rod , 10329888 lv7 t 8154x4 443 821 010 000 steering wheel 175 500 401 004 , 10327449 lv7 t 8154x4 443 124 009 000 wiper leverage , 10318995 lv7 t 8154x4 203 151 018 4 hinge 250 mm , 10322868 lv7 t 8154x4 442 053 610 074 sealing ring js 12 , 10317371 lv7 t 8154x4 273 521 290 000 shaft sealing gp 160x190x15 sm 40 235 , 10331776 lv7 t 8154x4 443 851 008 000 indicator443 851 008 , 10335557 lv7 t 8154x4 prm 2326 1 4153 4907 4706 pin to fit clutch plate , 10319528 lv7 t 8154x4 202 042 030 4 sattelite housing , 10329438 lv7 t 8154x4 483 zz0 205 3 seal kit for hydraulic cyl , 10313781 lv7 t 8154x4 442 072 511 504 housing with stud bolts , 10331530 lv7 t 8154x4 442 050 312 774 bush , 10317348 lv7 t 8154x4 273 521 308 000 shaft sealing g 170x200x15 csn 02 9401 1 , 10314677 lv7 t 8154x4 442 075 740 554 pin assy front tow hook , 10325663 lv7 t 8154x4 442 987 980 624 step board bracket lh , 10335391 lv7 t 8154x4 prm 327 841 547 506 490 6 tool to lock connecting sleeve , 10317935 lv7 t 8154x4 442 053 730 174 distributor , 10320983 lv7 t 8154x4 207 663 413 000 storage battery dearation , 10329466 lv7 t 8154x4 483 eg 030 25 lamp assy , 10335430 lv7 t 8154x4 prm 3603 415 581 062 906 bar to position cyl heads 8 10 cyl , 10319316 lv7 t 8154x4 442 072 001 044 propeller shaft , 10330690 lv7 t 8154x4 442 965 051 774 flap lh , 10318986 lv7 t 8154x4 203 151 017 4 hinge 234 mm , 10320128 lv7 t 8154x4 442 078 990 774 electric installation of instrument , 10329465 lv7 t 8154x4 483 bd 03069 rod upper lh part assy , 10318599 lv7 t 8154x4 273 110 112 000 ring 20x2 csn 02 9281 2 , 10314670 lv7 t 8154x4 442 075 850 354 trailer hitch , 10315882 lv7 t 8154x4 130 886 860 094 rear column rh , 10331083 lv7 t 8154x4 442 020 870 324 spacer ring , 10323616 lv7 t 8154x4 990 700 582 000 rest97405 152 , 10335124 lv7 t 8154x4 443 930 159 890 coil system , 10330484 lv7 t 8154x4 442 972 450 744 housing cover , 10323636 lv7 t 8154x4 990 700 571 000 rest 97405 151 , 10322612 lv7 t 8154x4 442 075 066 424 tierod , 10327551 lv7 t 8154x4 443 422 066 032 fuel gauge , 10330094 lv7 t 8154x4 442 076 633 434 fuel supply tube , 10319363 lv7 t 8154x4 130 079 014 604 cable assembly , 10319036 lv7 t 8154x4 202 072 057 4 satellite , 10317668 lv7 t 8154x4 273 521 271 000 shaft sealing gp 150x180x15 , 10314699 lv7 t 8154x4 442 052 381 784 wheel screw , 10316075 lv7 t 8154x4 442 070 333 384 upper intake manifold , 10326109 lv7 t 8154x4 443 624 015 012 regulating valve , 10317495 lv7 t 8154x4 442 079 250 274 hydraulic clutch , 10331607 lv7 t 8154x4 442 029 360 074 carrier head , 10335851 lv7 t 8154x4 443 930 159 970 stator , 10335869 lv7 t 8154x4 443 937 150 250 brush holder , 10318714 lv7 t 8154x4 272 327 007 000 hose 6 12 272 327 007 , 10322670 lv7 t 8154x4 442 075 065 894 steering tie rod , 10317919 lv7 t 8154x4 442 053 730 164 distributor , 10313586 lv7 t 8154x4 442 072 954 314 bracket of intermediate lever , 10357806 lv7 t 8154x4 442 072 001 224 propeller shaft maintenance free , 10335435 lv7 t 8154x4 443 970 100 000 electromagnet 443 811 443 350 34094267 , 10326211 lv7 t 8154x4 314 428 111 100 cable , 10329474 lv7 t 8154x4 483 zz 11385 rubber pad , 10331056 lv7 t 8154x4 442 021 661 954 steering lever , 10329458 lv7 t 8154x4 483 bd 03036 rod upper lh part assy , 10335402 lv7 t 8154x4 prm 327 741 547 506 480 6 tool to lock connection sleeve of synch , 10315472 lv7 t 8154x4 205 257 148 4 nut , 10335232 lv7 t 8154x4 483 eg 03017 angle iron assy , 10319083 lv7 t 8154x4 442 071 430 544 gear tube shift , 10357702 lv7 t 8154x4 482 zz1 121 4 unit sign plate , 10357866 lv7 t 8154x4 442 053 120 434 spring tubepe , 10319368 lv7 t 8154x4 130 079 014 594 cable assembly , 10317457 lv7 t 8154x4 442 050 810 554 spacer washer 1 6 mm , 10335016 lv7 t 8154x4 443 999 042 000 bearing psl 69 302 , 10329446 lv7 t 8154x4, 10589454 lv7 av 15 485 hc 11149 head cylinder, 10367427 lv7 av 15 578 003 910 952 28 axle suspension, 10314054 lv7 t 815 993 050 140 0 retainer gear, 10322857 lv7 t 815 573 911 390 6 s930588 1 manomtr of servo strg, 10312717 lv7 t 815 993 300 023 0 driven gear wheel, 10318440 lv7 t 815 292 201 769 4 front mudguard rh, 10337008 lv7 t 815 443 400 398 0 flash beacon klx7000fl, 10322409 lv7 t 815 993 200 102 0 o ring, 10339984 lv7 t 815 345 510 009 0 side direction lamp 5w, 10318426 lv7 t 815 292 201 768 4 front mudguard lh, 10314106 lv7 t 815 207 036 007 4 exchanger output neck, 10328077 lv7 t 815 443 311 007 5 fog headlamp waterning asymetric, 10321075 lv7 t 815 993 050 020 0 injector, 10319431 lv7 t 815 990 300 613 0 bearing na 4910 v csn 02 4680, 10317885 lv7 t 815 205 365 269 4 compressor neck m27x2, 10324039 lv7 t 815 207 901 644 4 cunductor, 10324124 lv7 t 815 207 902 475 4 bundle cable abs hinder, 10319666 lv7 t 815 201 694 049 4 rear gear change rod, 10326849 lv7 t 815 207 252 002 4 cover, 10322545 lv7 t 815 993 050 542 0 hose flaxible, 10314640 lv7 t 815 207 111 215 4 gear shift lever, 10316761 lv7 t 815 207 661 384 4 indicator line, 10322851 lv7 t 815 573 911 420 6 urn 0202 1 wrench for nut 442020870164, 10336745 lv7 t 815 443 400 714 0 electro accessories, 10314434 lv7 t 815 993 050 135 0 shaft idler, 10316136 lv7 t 815 207 590 142 4 exhauht silencer, 10318029 lv7 t 815 294 802 180 4 light holder, 10318039 lv7 t 815 993 050 128 0 cover cam shaft, 10321499 lv7 t 815 993 200 814 0 carrier, 10317459 lv7 t 815 207 650 151 4 fuel tank, 10321395 lv7 t 815 993 200 827 0 shaft, 10320974 lv7 t 815 993 050 012 0 spider jaw coupling, 10315728 lv7 t 815 993 050 401 0 support accessory drive m10x1 5x100, 10337976 lv7 t 815 443 332 042 0 mirrors 59 3601 128, 10317384 lv7 t 815 202 961 026 4 pulley, 10317497 lv7 t 815 573 911 290 6 prm3432 set of shaft rotating tools, 10317056 lv7 t 815 274 833 020 0 cock spherical 3830 1 4, 10321698 lv7 t 815 993 200 831 0 retainer bearing assy front, 10320604 lv7 t 815 993 050 554 0 brace air compressor, 10315628 lv7 t 815 993 050 412 0 seal o ring, 10325107 lv7 t 815 993 200 363 0 sensor, 10320696 lv7 t 815 993 200 810 0 spider clutch, 10335153 lv7 t 815 443 332 235 0 rear view mirror rh z320 10004p, 10321531 lv7 t 815 993 200 811 0 hub clutch, 10321618 lv7 t 815 993 200 824 0 shaft clutch, 10319474 lv7 t 815 993 050 471 0 ring coupling, 10319248 lv7 t 815 993 050 190 0 pulley accessory drive, 10320261 lv7 t 815 993 200 777 0 desk, 10316420 lv7 t 815 993 050 332 0 set main bearing, 10320379 lv7 t 815 993 200 783 0 wheel gear, 10316943 lv7 t 815 993 050 349 0 housing axle drive, 10322186 lv7 t 815 205 439 209 4 rubber straight coupling, 10326389 lv7 t 815 443 400 097 0 control unit kzm002 b, 10325407 lv7 t 815 993 200 709 0 clutch hub, 10335364 lv7 t 815 573 910 740 6 prl1301 dvr to press timken brg, 10313890 lv7 t 815 993 200 772 0 cable harness, 10325442 lv7 t 815 993 200 704 0 gear ring drive, 10344663 lv7 t 815 548 615 091 0 tierod 183 m tt 75 5700, 10320611 lv7 t 815 547 507 050 6 prm 3354 universal puller 47x90x180 0 90, 10325446 lv7 t 815 993 200 702 0 gear wheel, 10311813 lv7 t 815 547 606 410 6 prm 3337 tool to fix double arm strg, 10319655 lv7 t 815 993 200 778 0 wheel blade, 10317428 lv7 t 815 207 599 018 4 rear leaf spring, 10321625 lv7 t 815 993 200 823 0 housing piston, 10321676 lv7 t 815 993 200 817 0 shaft output assembly front, 10317444 lv7 t 815 993 050 578 0 key plain woodruff, 10317453 lv7 t 815 207 650 139 4 expansion tank, 10325411 lv7 t 815 993 200 708 0 clutch hub, 10325414 lv7 t 815 993 200 707 0 wheel drive ring, 10335627 lv7 t 815 558 106 100 6 prm 2688 tool to set up clearance, 10325741 lv7 t 815 207 116 093 4 acceleration pedal, 10322905 lv7 t 815 207 924 058 4 thermoplastic hose, 10335454 lv7 t 815 573 908 640 6 prm 3143 dvr of outer race of brg, 10312647 lv7 t 815 993 300 009 0 o ring, 10314292 lv7 t 815 993 050 150 0 gear hydraulic pump, 10340077 lv7 t 815 534 905 320 6 prm 0777 universal puller, 10316252 lv7 t 815 207 560 223 4 conneting part, 10340207 lv7 t 815 534 907 300 6 prm 3322 universal extractor, 10313045 lv7 t 8154x4 205 079 120 4 spacer ring, 10331547 lv7 t 8154x4 442 028 513 024 tie rod, 10329888 lv7 t 8154x4 443 821 010 000 steering wheel 175 500 401 004, 10327449 lv7 t 8154x4 443 124 009 000 wiper leverage, 10318995 lv7 t 8154x4 203 151 018 4 hinge 250 mm, 10322868 lv7 t 8154x4 442 053 610 074 sealing ring js 12, 10317371 lv7 t 8154x4 273 521 290 000 shaft sealing gp 160x190x15 sm 40 235, 10331776 lv7 t 8154x4 443 851 008 000 indicator443 851 008, 10335557 lv7 t 8154x4 prm 2326 1 4153 4907 4706 pin to fit clutch plate, 10319528 lv7 t 8154x4 202 042 030 4 sattelite housing, 10329438 lv7 t 8154x4 483 zz0 205 3 seal kit for hydraulic cyl, 10313781 lv7 t 8154x4 442 072 511 504 housing with stud bolts, 10331530 lv7 t 8154x4 442 050 312 774 bush, 10317348 lv7 t 8154x4 273 521 308 000 shaft sealing g 170x200x15 csn 02 9401 1, 10314677 lv7 t 8154x4 442 075 740 554 pin assy front tow hook, 10325663 lv7 t 8154x4 442 987 980 624 step board bracket lh, 10335391 lv7 t 8154x4 prm 327 841 547 506 490 6 tool to lock connecting sleeve, 10317935 lv7 t 8154x4 442 053 730 174 distributor, 10320983 lv7 t 8154x4 207 663 413 000 storage battery dearation, 10329466 lv7 t 8154x4 483 eg 030 25 lamp assy, 10335430 lv7 t 8154x4 prm 3603 415 581 062 906 bar to position cyl heads 8 10 cyl, 10319316 lv7 t 8154x4 442 072 001 044 propeller shaft, 10330690 lv7 t 8154x4 442 965 051 774 flap lh, 10318986 lv7 t 8154x4 203 151 017 4 hinge 234 mm, 10320128 lv7 t 8154x4 442 078 990 774 electric installation of instrument, 10329465 lv7 t 8154x4 483 bd 03069 rod upper lh part assy, 10318599 lv7 t 8154x4 273 110 112 000 ring 20x2 csn 02 9281 2, 10314670 lv7 t 8154x4 442 075 850 354 trailer hitch, 10315882 lv7 t 8154x4 130 886 860 094 rear column rh, 10331083 lv7 t 8154x4 442 020 870 324 spacer ring, 10323616 lv7 t 8154x4 990 700 582 000 rest97405 152, 10335124 lv7 t 8154x4 443 930 159 890 coil system, 10330484 lv7 t 8154x4 442 972 450 744 housing cover, 10323636 lv7 t 8154x4 990 700 571 000 rest 97405 151, 10322612 lv7 t 8154x4 442 075 066 424 tierod, 10327551 lv7 t 8154x4 443 422 066 032 fuel gauge, 10330094 lv7 t 8154x4 442 076 633 434 fuel supply tube, 10319363 lv7 t 8154x4 130 079 014 604 cable assembly, 10319036 lv7 t 8154x4 202 072 057 4 satellite, 10317668 lv7 t 8154x4 273 521 271 000 shaft sealing gp 150x180x15, 10314699 lv7 t 8154x4 442 052 381 784 wheel screw, 10316075 lv7 t 8154x4 442 070 333 384 upper intake manifold, 10326109 lv7 t 8154x4 443 624 015 012 regulating valve, 10317495 lv7 t 8154x4 442 079 250 274 hydraulic clutch, 10331607 lv7 t 8154x4 442 029 360 074 carrier head, 10335851 lv7 t 8154x4 443 930 159 970 stator, 10335869 lv7 t 8154x4 443 937 150 250 brush holder, 10318714 lv7 t 8154x4 272 327 007 000 hose 6 12 272 327 007, 10322670 lv7 t 8154x4 442 075 065 894 steering tie rod, 10317919 lv7 t 8154x4 442 053 730 164 distributor, 10313586 lv7 t 8154x4 442 072 954 314 bracket of intermediate lever, 10357806 lv7 t 8154x4 442 072 001 224 propeller shaft maintenance free, 10335435 lv7 t 8154x4 443 970 100 000 electromagnet 443 811 443 350 34094267, 10326211 lv7 t 8154x4 314 428 111 100 cable, 10329474 lv7 t 8154x4 483 zz 11385 rubber pad, 10331056 lv7 t 8154x4 442 021 661 954 steering lever, 10329458 lv7 t 8154x4 483 bd 03036 rod upper lh part assy, 10335402 lv7 t 8154x4 prm 327 741 547 506 480 6 tool to lock connection sleeve of synch, 10315472 lv7 t 8154x4 205 257 148 4 nut, 10335232 lv7 t 8154x4 483 eg 03017 angle iron assy, 10319083 lv7 t 8154x4 442 071 430 544 gear tube shift, 10357702 lv7 t 8154x4 482 zz1 121 4 unit sign plate, 10357866 lv7 t 8154x4 442 053 120 434 spring tubepe, 10319368 lv7 t 8154x4 130 079 014 594 cable assembly, 10317457 lv7 t 8154x4 442 050 810 554 spacer washer 1 6 mm, 10335016 lv7 t 8154x4 443 999 042 000 bearing psl 69 302, 10329446 lv7 t 8154x4 483 zz 11499 gasket, 10327581 lv7 t 8154x4 443 611 001 007 coupling t7140222414 m22 m14, 10335372 lv7 t 8154x4 990 100 932 000 servo strg w o lever hra 450 7 32, 10325668 lv7 t 8154x4 442 989 061 514 front mudguard part rh, 10334934 lv7 av 15 442 075 070 047 complete clamp, 10335106 lv7 av 15 2227 0 367 ring t20 appl upto eqpt srl 140, 10313558 lv7 av 15 578 003 919 352 26 connecting cable, 10369268 lv7 av 15 2236 0 464 pin with handle, 10365417 lv7 av 15 578 903 910 352 28 articulated tow bar, 10367232 lv7 av 15 578 003 122 352 43 two side hook, 10346948 lv7 av 15 578 003 106 452 34 wheel braking, 10361512 lv7 av 15 578 903 152 352 28 suspension of hook, 10353168 lv7 av 15 110 228 942 6 operator cabin canvas, 10335342 lv7 av 15 2204 0 112 locksmith file 54 28 28 sb 1, 10369281 lv7 av 15 2235 0 462 upper reduction bush 1102690106, 10325305 lv7 av 15 578 003 017 552 04 pin wheel, 10335112 lv7 av 15 2227 0 368 ring t19 appl upto eqpt srl no 140, 10335328 lv7 av 15 213 522 010 401 piercer, 10369273 lv7 av 15 2206 0 134 tank connection pipe argt, 10369271 lv7 av 15 2196 0 26 steering holder 1102280256, 10332153 lv7 av 15 314 986 008 000 rope clamp 22 4 25mm, 10369269 lv7 av 15 39201 label hydraulic oil, 10361092 lv7 av 15 442 079 540 024 complete mounting lever, 10326686 lv7 av 15 101 638 123 0 back up ring eqpt sno 141 and above, 10356175 lv7 av 15 578 903 911 852 69 pin complete d 76, 10368070 lv7 av 15 578 003 923 552 62 pipe of left hand cylinder, 10332653 lv7 av 15 2239 0 500 packing ring 24x30 csn 02 9310 3, 10339912 lv7 av 15 574 010 185 301 belt, 10357260 lv7 av 15 578 903 915 552 28 rear yoke, 10357251 lv7 av 15 578 903 915 452 28 front yoke, 10366492 lv7 av 15 578 903 911 252 28 short beam 6 5 t, 10335350 lv7 av 15 2206 0 133 pummping aggregate 302 160 108 99, 10356526 lv7 av 15 578 903 911 652 28 work bench and accessories, 10348525 lv7 av 15 578 903 913 352 62 arial piston engine, 10351376 lv7 av 15 578 003 915 152 28 hauling cross beam, 10367482 lv7 av 15 578 003 911 652 43 carrier assy, 10332079 lv7 av 15 578 003 116 952 43 crowned wheel, 10353060 lv7 av 15 110 262 951 0 cleaning inner piece, 10367126 lv7 av 15 578 003 119 552 28 batten, 10332699 lv7 av 15 2239 0 501 packing ring 33x39 csn 02 9310 3, 10369272 lv7 av 15 220 108 1 shock damper tfp 013231 67, 10346997 lv7 av 15 cfw01 10619 sealing, 10353194 lv7 av 15 155 287 37s b30 case for bulbs and fuses, 10589323 lv7 av 15 155 hc 99127 packing rod, 10589316 lv7 av 15 155 hc 99216 ring piston, 10589317 lv7 av 15 485 hc 11165 piston, 10589449 lv7 av 15 485 hc 11124 piston, 10360929 lv7 av 15 442 046 560 034 mounting lever, 10589456 lv7 av 15 cfp04 00514 pin dowel, 10340600 lv7 av 15 578 003 177 353 28 reduction bush d 45, 10335385 lv7 av 15 578 003 102 752 05 socket, 10331591 lv7 av 15 2238 0 495 washer 16 csn 02 1740 05, 10370601 lv7 av 15 ixb 1a four strip leggings for welder open, 10351379 lv7 av 15 578 003 914 252 28 carry roller frame, 10370623 lv7 av 15 311 733 100 600 spacer ring 60

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Air Line Operator. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Air Line Operator sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Air Line Operator Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Air Line Operator, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Air Line Operator Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Air Line Operator Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Air Line Operator.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Air Line Operator depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Air Line Operator Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Air Line Operator bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Air Line Operator. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Air Line Operator, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Air Line Operator, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Air Line Operator?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Air Line Operator tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Air Line Operator?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Air Line Operator, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Air Line Operator is declared L1 and is generally awarded the contract