tender for set of p & k value gauges for wap-4 loco tm shaft pinion 23 teeth (mating bull gear 58 teeth), set of p & k value gauges for wap-4 loco tm shaft pinion 23 teeth (mating bull gear 58 teeth) as per rds o drawing no. skdl-4356 or latest. material tool steel to is: 3748/ 90, hardness: 50/ 55 hrc. set consisting of 03 item s as follows. (1) profile deviation checking gauge -p value with feeler gauges size 0.20 mm, 0.25 mm, 0.30 mm & 0.40 mm. qty/set. = 01 number(each). (2) tooth spacing k value checking go gauge size: 131.461 mm(max.) / 131.607 mm (min.). qty/set. = 01 number. (3) tooth spacing k value checking no-go gauge size-service limit : 130.30 mm. qty/set. = 01 number. on the body of each gauge manufacturer name, manufacturing date, name of user shed(els/bza/s.construction of rl y), type of gauge and range of measurement along with the drawing number & also its functioning should be inscribed clearly. makes: jyoti or paragon instrumentation or ganapathy industries or its similar. note:-1 item to be supplied alo ng with valid calibration test certificate of 01 year validity period from nabl accredited/ govt. approved labs. -2 warra nty certificate shall be submitted along with the material in the name of sse/m7/els/bza. -3 bidders must clearly speci fy the make of the offered item, along with the specifications & drawings if any during tender submission, if not offer will not be considered. - warranty period: 30 months after the date of delivery

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding tool steel,bull gear parameters and guide you on how to coordinate efficiently with the procurement team of South Coast Railway SCOR

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth), Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth) As Per Rds O Drawing No. Skdl-4356 Or Latest. Material Tool Steel To Is: 3748/ 90, Hardness: 50/ 55 Hrc. Set Consisting Of 03 Item S As Follows. (1) Profile Deviation Checking Gauge -p Value With Feeler Gauges Size 0.20 Mm, 0.25 Mm, 0.30 Mm & 0.40 Mm. Qty/set. = 01 Number(each). (2) Tooth Spacing K Value Checking Go Gauge Size: 131.461 Mm(max.) / 131.607 Mm (min.). Qty/set. = 01 Number. (3) Tooth Spacing K Value Checking No-go Gauge Size-service Limit : 130.30 Mm. Qty/set. = 01 Number. On The Body Of Each Gauge Manufacturer Name, Manufacturing Date, Name Of User Shed(els/bza/s.construction Of Rl Y), Type Of Gauge And Range Of Measurement Along With The Drawing Number & Also Its Functioning Should Be Inscribed Clearly. Makes: Jyoti Or Paragon Instrumentation Or Ganapathy Industries Or Its Similar. Note:-1 Item To Be Supplied Alo Ng With Valid Calibration Test Certificate Of 01 Year Validity Period From Nabl Accredited/ Govt. Approved Labs. -2 Warra Nty Certificate Shall Be Submitted Along With The Material In The Name Of Sse/m7/els/bza. -3 Bidders Must Clearly Speci Fy The Make Of The Offered Item, Along With The Specifications & Drawings If Any During Tender Submission, If Not Offer Will Not Be Considered. - Warranty Period: 30 Months After The Date Of Delivery . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by South Coast Railway SCOR.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth), Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth) As Per Rds O Drawing No. Skdl-4356 Or Latest. Material Tool Steel To Is: 3748/ 90, Hardness: 50/ 55 Hrc. Set Consisting Of 03 Item S As Follows. (1) Profile Deviation Checking Gauge -p Value With Feeler Gauges Size 0.20 Mm, 0.25 Mm, 0.30 Mm & 0.40 Mm. Qty/set. = 01 Number(each). (2) Tooth Spacing K Value Checking Go Gauge Size: 131.461 Mm(max.) / 131.607 Mm (min.). Qty/set. = 01 Number. (3) Tooth Spacing K Value Checking No-go Gauge Size-service Limit : 130.30 Mm. Qty/set. = 01 Number. On The Body Of Each Gauge Manufacturer Name, Manufacturing Date, Name Of User Shed(els/bza/s.construction Of Rl Y), Type Of Gauge And Range Of Measurement Along With The Drawing Number & Also Its Functioning Should Be Inscribed Clearly. Makes: Jyoti Or Paragon Instrumentation Or Ganapathy Industries Or Its Similar. Note:-1 Item To Be Supplied Alo Ng With Valid Calibration Test Certificate Of 01 Year Validity Period From Nabl Accredited/ Govt. Approved Labs. -2 Warra Nty Certificate Shall Be Submitted Along With The Material In The Name Of Sse/m7/els/bza. -3 Bidders Must Clearly Speci Fy The Make Of The Offered Item, Along With The Specifications & Drawings If Any During Tender Submission, If Not Offer Will Not Be Considered. - Warranty Period: 30 Months After The Date Of Delivery in Andhra Pradesh.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth), Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth) As Per Rds O Drawing No. Skdl-4356 Or Latest. Material Tool Steel To Is: 3748/ 90, Hardness: 50/ 55 Hrc. Set Consisting Of 03 Item S As Follows. (1) Profile Deviation Checking Gauge -p Value With Feeler Gauges Size 0.20 Mm, 0.25 Mm, 0.30 Mm & 0.40 Mm. Qty/set. = 01 Number(each). (2) Tooth Spacing K Value Checking Go Gauge Size: 131.461 Mm(max.) / 131.607 Mm (min.). Qty/set. = 01 Number. (3) Tooth Spacing K Value Checking No-go Gauge Size-service Limit : 130.30 Mm. Qty/set. = 01 Number. On The Body Of Each Gauge Manufacturer Name, Manufacturing Date, Name Of User Shed(els/bza/s.construction Of Rl Y), Type Of Gauge And Range Of Measurement Along With The Drawing Number & Also Its Functioning Should Be Inscribed Clearly. Makes: Jyoti Or Paragon Instrumentation Or Ganapathy Industries Or Its Similar. Note:-1 Item To Be Supplied Alo Ng With Valid Calibration Test Certificate Of 01 Year Validity Period From Nabl Accredited/ Govt. Approved Labs. -2 Warra Nty Certificate Shall Be Submitted Along With The Material In The Name Of Sse/m7/els/bza. -3 Bidders Must Clearly Speci Fy The Make Of The Offered Item, Along With The Specifications & Drawings If Any During Tender Submission, If Not Offer Will Not Be Considered. - Warranty Period: 30 Months After The Date Of Delivery. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Vijayawada.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply tool steel,bull gear items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by South Coast Railway SCOR

To register an eligible bid for these tool steel,bull gear contracts, companies must prepare their core compliance documents. Vendors operating across Andhra Pradesh must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality tool steel,bull gear solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Vijayawada region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth), Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth) As Per Rds O Drawing No. Skdl-4356 Or Latest. Material Tool Steel To Is: 3748/ 90, Hardness: 50/ 55 Hrc. Set Consisting Of 03 Item S As Follows. (1) Profile Deviation Checking Gauge -p Value With Feeler Gauges Size 0.20 Mm, 0.25 Mm, 0.30 Mm & 0.40 Mm. Qty/set. = 01 Number(each). (2) Tooth Spacing K Value Checking Go Gauge Size: 131.461 Mm(max.) / 131.607 Mm (min.). Qty/set. = 01 Number. (3) Tooth Spacing K Value Checking No-go Gauge Size-service Limit : 130.30 Mm. Qty/set. = 01 Number. On The Body Of Each Gauge Manufacturer Name, Manufacturing Date, Name Of User Shed(els/bza/s.construction Of Rl Y), Type Of Gauge And Range Of Measurement Along With The Drawing Number & Also Its Functioning Should Be Inscribed Clearly. Makes: Jyoti Or Paragon Instrumentation Or Ganapathy Industries Or Its Similar. Note:-1 Item To Be Supplied Alo Ng With Valid Calibration Test Certificate Of 01 Year Validity Period From Nabl Accredited/ Govt. Approved Labs. -2 Warra Nty Certificate Shall Be Submitted Along With The Material In The Name Of Sse/m7/els/bza. -3 Bidders Must Clearly Speci Fy The Make Of The Offered Item, Along With The Specifications & Drawings If Any During Tender Submission, If Not Offer Will Not Be Considered. - Warranty Period: 30 Months After The Date Of Delivery by South Coast Railway SCOR

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth), Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth) As Per Rds O Drawing No. Skdl-4356 Or Latest. Material Tool Steel To Is: 3748/ 90, Hardness: 50/ 55 Hrc. Set Consisting Of 03 Item S As Follows. (1) Profile Deviation Checking Gauge -p Value With Feeler Gauges Size 0.20 Mm, 0.25 Mm, 0.30 Mm & 0.40 Mm. Qty/set. = 01 Number(each). (2) Tooth Spacing K Value Checking Go Gauge Size: 131.461 Mm(max.) / 131.607 Mm (min.). Qty/set. = 01 Number. (3) Tooth Spacing K Value Checking No-go Gauge Size-service Limit : 130.30 Mm. Qty/set. = 01 Number. On The Body Of Each Gauge Manufacturer Name, Manufacturing Date, Name Of User Shed(els/bza/s.construction Of Rl Y), Type Of Gauge And Range Of Measurement Along With The Drawing Number & Also Its Functioning Should Be Inscribed Clearly. Makes: Jyoti Or Paragon Instrumentation Or Ganapathy Industries Or Its Similar. Note:-1 Item To Be Supplied Alo Ng With Valid Calibration Test Certificate Of 01 Year Validity Period From Nabl Accredited/ Govt. Approved Labs. -2 Warra Nty Certificate Shall Be Submitted Along With The Material In The Name Of Sse/m7/els/bza. -3 Bidders Must Clearly Speci Fy The Make Of The Offered Item, Along With The Specifications & Drawings If Any During Tender Submission, If Not Offer Will Not Be Considered. - Warranty Period: 30 Months After The Date Of Delivery within the Andhra Pradesh jurisdiction

The official timeline and deadline details for Tender For Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth), Set Of P & K Value Gauges For Wap-4 Loco Tm Shaft Pinion 23 Teeth (mating Bull Gear 58 Teeth) As Per Rds O Drawing No. Skdl-4356 Or Latest. Material Tool Steel To Is: 3748/ 90, Hardness: 50/ 55 Hrc. Set Consisting Of 03 Item S As Follows. (1) Profile Deviation Checking Gauge -p Value With Feeler Gauges Size 0.20 Mm, 0.25 Mm, 0.30 Mm & 0.40 Mm. Qty/set. = 01 Number(each). (2) Tooth Spacing K Value Checking Go Gauge Size: 131.461 Mm(max.) / 131.607 Mm (min.). Qty/set. = 01 Number. (3) Tooth Spacing K Value Checking No-go Gauge Size-service Limit : 130.30 Mm. Qty/set. = 01 Number. On The Body Of Each Gauge Manufacturer Name, Manufacturing Date, Name Of User Shed(els/bza/s.construction Of Rl Y), Type Of Gauge And Range Of Measurement Along With The Drawing Number & Also Its Functioning Should Be Inscribed Clearly. Makes: Jyoti Or Paragon Instrumentation Or Ganapathy Industries Or Its Similar. Note:-1 Item To Be Supplied Alo Ng With Valid Calibration Test Certificate Of 01 Year Validity Period From Nabl Accredited/ Govt. Approved Labs. -2 Warra Nty Certificate Shall Be Submitted Along With The Material In The Name Of Sse/m7/els/bza. -3 Bidders Must Clearly Speci Fy The Make Of The Offered Item, Along With The Specifications & Drawings If Any During Tender Submission, If Not Offer Will Not Be Considered. - Warranty Period: 30 Months After The Date Of Delivery are available inside the detailed notification files. Bidders planning to target this contract in Vijayawada should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.