tender for 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, procurement of protection shields and other pp consumables for boiler tubes at btps, as per technical data half round tube shield for ww screen tube od:63.5mmtube shield: r=32mm, l=1500mm, t=3.0mm, material: ss304, half round tube shield for bp screen tube od:51mmtube shield: r=26mm, l=1500mm, t=3.0mm, material: ss304, half round bend tube shield for sh/rh steam cooled spacer tube having outer dia:51mm, shield thickness5mm and its 2 no. locking clamp bend tube shield, r=26 mm, l=600 mm, (mat.: ss-310), half round tube shield for ltshtube od:47.63mmtube shield: r=24.5mm, l=1500mm, t=3.0mm, material: ss304, half round shield for tube dia 44.5mm shield id 44.5mm length 2100mm, material: ss304, half round tube shield for ltshtube od:47.63mmtube shield for offset bend of ltsh terminal tube: r=24mm, l=350mm, t=3.0mm, material: ss304, clip for tube shield of tube dia 47.63mm, mat: ss304, clip for tube shield of tube dia 38.1mm, mat: ss304, clip for tube shield of tube dia 51mm, mat: ss304, clip for tube shield of tube dia 63.5mm, mat: ss304, cassette baffle economiser coil (upper), mat: ss304, cassette baffle economiser coil (lower), mat: ss304, cassette baffle ltsh coil (lower), mat: ss 304, l-plate for eco coil (lower), width-600 mm, length-1775mm, thickness-2.5 mm, mat-ss 304, l-plate for eco coil (upper), width-600 mm, length-2230 mm, thickness-2.5 mm, mat-ss 304, ss rod, dia.10mm, mat-ss 304, cassette baffle top plate for eco coil, size-260x50 mm, thickness-2.5 mm, mat-ss 304 with two edges rounded of one side of plate., cassette baffle top plate for ltsh coil, size-610x58.5 mm, thickness-2.5 mm, mat-ss 304 with two edges rounded of one side of plate, half round tube shield for extended water wall tube having outside dia-63.5 mm, id-67 mm, length-2000 mm, thickness-3 mm, material: ss304, cassette baffle ltsh coil (upper), material: ss304, m.s welded wire net, swg8, mesh size:2" x 2"(inches)width of net-4(feet), weight of 1roll-70 kg(approx), rod, dia 6mm, l=200mm, material: ms for insulation and pressure parts of boiler. (spares for boiler), half round tube shield for economiser tube od:38.1mm-tube shield radius: r=19.5mm, l=1670mm, t=3.0mm, material: ss304, clip for tube 44.5mm, clip height - 30mm, material: ss304, half round tube shield for ltsh inlet header offset bend (t1), od-47.63 mm, shield id=48.0 mm, shield thickness-3 mm and material- ss 304 (drg no-mtps/7&8/blr/2023/032, rev-00), half round tube shield for ltsh inlet header offset bend (t2), od-47.63 mm, shield id=48.0 mm, shield thickness-3 mm and material-ss 304 (drg no-mtps/7&8/blr/2023/032, rev-00), half round tube shield for ww screen tube bend near outlet header, shield id=64 mm, l-280mm, thickness - 3mm, mat: ss-304 (for ww screen tube dia. of 63.5mm) (drg no-mtps/7&8/blr/2023/032, rev-00), half round tube shield for ltsh tube od:47.63mm-tube shield for bifurcate tube bend:shield id=48.0 mm, l=500mm,t=3.0mm, material: ss 304 (drg no-mtps/7&8/blr/2023/032, rev-00), half round tube shield for bp screen tube bend near roof, shield id=52 mm, l-280mm, thickness-3mm, mat: ss 304 (for bp screen tube dia. of 51mm) (drg no-mtps/7&8/blr/2023/032, rev-00), inner tube shield for 90° bend, shield id=38.5 mm, l1=630 mm (half round tube shield for eco. tube od: 38.1 mm (mat.: ss-304), bend radius - r 152.0 mm, outer tube shield for 90-degree bend (for eco. tube dia 38.1 mm) shield id=38.5 mm, l1=630mm, material - ss 304, bend radius - r 152.0 mm, outer tube shield for 90° bend (for ltsh tube dia 47.63) shield id = 48.0 mm, l1=600mm, material - ss 304, bend radius - r 152.0 mm, fin for water wall: 12.7mm x 6mm (material:is2062gra), woven fabric ss net material-304mesh wire dia - 4 mm length-1895 mm width-450 mm screen size: 14 mm x 14 mm, half round shield for aph main bracing, shield id- dia 168.3, thk-3 mm, material-ss 304, length-1000 mm

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding woven fabric,welded wire,outer tube,wire net,ss rod parameters and guide you on how to coordinate efficiently with the procurement team of Damodar Valley Corporation DVC

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, Procurement Of Protection Shields And Other Pp Consumables For Boiler Tubes At Btps, As Per Technical Data Half Round Tube Shield For Ww Screen Tube Od:63.5mmtube Shield: R=32mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Tube Shield For Bp Screen Tube Od:51mmtube Shield: R=26mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Bend Tube Shield For Sh/rh Steam Cooled Spacer Tube Having Outer Dia:51mm, Shield Thickness5mm And Its 2 No. Locking Clamp Bend Tube Shield, R=26 Mm, L=600 Mm, (mat.: Ss-310), Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield: R=24.5mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Shield For Tube Dia 44.5mm Shield Id 44.5mm Length 2100mm, Material: Ss304, Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield For Offset Bend Of Ltsh Terminal Tube: R=24mm, L=350mm, T=3.0mm, Material: Ss304, Clip For Tube Shield Of Tube Dia 47.63mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 38.1mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 51mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 63.5mm, Mat: Ss304, Cassette Baffle Economiser Coil (upper), Mat: Ss304, Cassette Baffle Economiser Coil (lower), Mat: Ss304, Cassette Baffle Ltsh Coil (lower), Mat: Ss 304, L-plate For Eco Coil (lower), Width-600 Mm, Length-1775mm, Thickness-2.5 Mm, Mat-ss 304, L-plate For Eco Coil (upper), Width-600 Mm, Length-2230 Mm, Thickness-2.5 Mm, Mat-ss 304, Ss Rod, Dia.10mm, Mat-ss 304, Cassette Baffle Top Plate For Eco Coil, Size-260x50 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate., Cassette Baffle Top Plate For Ltsh Coil, Size-610x58.5 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate, Half Round Tube Shield For Extended Water Wall Tube Having Outside Dia-63.5 Mm, Id-67 Mm, Length-2000 Mm, Thickness-3 Mm, Material: Ss304, Cassette Baffle Ltsh Coil (upper), Material: Ss304, M.s Welded Wire Net, Swg8, Mesh Size:2" X 2"(inches)width Of Net-4(feet), Weight Of 1roll-70 Kg(approx), Rod, Dia 6mm, L=200mm, Material: Ms For Insulation And Pressure Parts Of Boiler. (spares For Boiler), Half Round Tube Shield For Economiser Tube Od:38.1mm-tube Shield Radius: R=19.5mm, L=1670mm, T=3.0mm, Material: Ss304, Clip For Tube 44.5mm, Clip Height - 30mm, Material: Ss304, Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t1), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material- Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t2), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material-ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ww Screen Tube Bend Near Outlet Header, Shield Id=64 Mm, L-280mm, Thickness - 3mm, Mat: Ss-304 (for Ww Screen Tube Dia. Of 63.5mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Tube Od:47.63mm-tube Shield For Bifurcate Tube Bend:shield Id=48.0 Mm, L=500mm,t=3.0mm, Material: Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Bp Screen Tube Bend Near Roof, Shield Id=52 Mm, L-280mm, Thickness-3mm, Mat: Ss 304 (for Bp Screen Tube Dia. Of 51mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Inner Tube Shield For 90° Bend, Shield Id=38.5 Mm, L1=630 Mm (half Round Tube Shield For Eco. Tube Od: 38.1 Mm (mat.: Ss-304), Bend Radius - R 152.0 Mm, Outer Tube Shield For 90-degree Bend (for Eco. Tube Dia 38.1 Mm) Shield Id=38.5 Mm, L1=630mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Outer Tube Shield For 90° Bend (for Ltsh Tube Dia 47.63) Shield Id = 48.0 Mm, L1=600mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Fin For Water Wall: 12.7mm X 6mm (material:is2062gra), Woven Fabric Ss Net Material-304mesh Wire Dia - 4 Mm Length-1895 Mm Width-450 Mm Screen Size: 14 Mm X 14 Mm, Half Round Shield For Aph Main Bracing, Shield Id- Dia 168.3, Thk-3 Mm, Material-ss 304, Length-1000 Mm . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Damodar Valley Corporation DVC.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, Procurement Of Protection Shields And Other Pp Consumables For Boiler Tubes At Btps, As Per Technical Data Half Round Tube Shield For Ww Screen Tube Od:63.5mmtube Shield: R=32mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Tube Shield For Bp Screen Tube Od:51mmtube Shield: R=26mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Bend Tube Shield For Sh/rh Steam Cooled Spacer Tube Having Outer Dia:51mm, Shield Thickness5mm And Its 2 No. Locking Clamp Bend Tube Shield, R=26 Mm, L=600 Mm, (mat.: Ss-310), Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield: R=24.5mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Shield For Tube Dia 44.5mm Shield Id 44.5mm Length 2100mm, Material: Ss304, Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield For Offset Bend Of Ltsh Terminal Tube: R=24mm, L=350mm, T=3.0mm, Material: Ss304, Clip For Tube Shield Of Tube Dia 47.63mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 38.1mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 51mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 63.5mm, Mat: Ss304, Cassette Baffle Economiser Coil (upper), Mat: Ss304, Cassette Baffle Economiser Coil (lower), Mat: Ss304, Cassette Baffle Ltsh Coil (lower), Mat: Ss 304, L-plate For Eco Coil (lower), Width-600 Mm, Length-1775mm, Thickness-2.5 Mm, Mat-ss 304, L-plate For Eco Coil (upper), Width-600 Mm, Length-2230 Mm, Thickness-2.5 Mm, Mat-ss 304, Ss Rod, Dia.10mm, Mat-ss 304, Cassette Baffle Top Plate For Eco Coil, Size-260x50 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate., Cassette Baffle Top Plate For Ltsh Coil, Size-610x58.5 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate, Half Round Tube Shield For Extended Water Wall Tube Having Outside Dia-63.5 Mm, Id-67 Mm, Length-2000 Mm, Thickness-3 Mm, Material: Ss304, Cassette Baffle Ltsh Coil (upper), Material: Ss304, M.s Welded Wire Net, Swg8, Mesh Size:2" X 2"(inches)width Of Net-4(feet), Weight Of 1roll-70 Kg(approx), Rod, Dia 6mm, L=200mm, Material: Ms For Insulation And Pressure Parts Of Boiler. (spares For Boiler), Half Round Tube Shield For Economiser Tube Od:38.1mm-tube Shield Radius: R=19.5mm, L=1670mm, T=3.0mm, Material: Ss304, Clip For Tube 44.5mm, Clip Height - 30mm, Material: Ss304, Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t1), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material- Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t2), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material-ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ww Screen Tube Bend Near Outlet Header, Shield Id=64 Mm, L-280mm, Thickness - 3mm, Mat: Ss-304 (for Ww Screen Tube Dia. Of 63.5mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Tube Od:47.63mm-tube Shield For Bifurcate Tube Bend:shield Id=48.0 Mm, L=500mm,t=3.0mm, Material: Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Bp Screen Tube Bend Near Roof, Shield Id=52 Mm, L-280mm, Thickness-3mm, Mat: Ss 304 (for Bp Screen Tube Dia. Of 51mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Inner Tube Shield For 90° Bend, Shield Id=38.5 Mm, L1=630 Mm (half Round Tube Shield For Eco. Tube Od: 38.1 Mm (mat.: Ss-304), Bend Radius - R 152.0 Mm, Outer Tube Shield For 90-degree Bend (for Eco. Tube Dia 38.1 Mm) Shield Id=38.5 Mm, L1=630mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Outer Tube Shield For 90° Bend (for Ltsh Tube Dia 47.63) Shield Id = 48.0 Mm, L1=600mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Fin For Water Wall: 12.7mm X 6mm (material:is2062gra), Woven Fabric Ss Net Material-304mesh Wire Dia - 4 Mm Length-1895 Mm Width-450 Mm Screen Size: 14 Mm X 14 Mm, Half Round Shield For Aph Main Bracing, Shield Id- Dia 168.3, Thk-3 Mm, Material-ss 304, Length-1000 Mm in Jharkhand.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, Procurement Of Protection Shields And Other Pp Consumables For Boiler Tubes At Btps, As Per Technical Data Half Round Tube Shield For Ww Screen Tube Od:63.5mmtube Shield: R=32mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Tube Shield For Bp Screen Tube Od:51mmtube Shield: R=26mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Bend Tube Shield For Sh/rh Steam Cooled Spacer Tube Having Outer Dia:51mm, Shield Thickness5mm And Its 2 No. Locking Clamp Bend Tube Shield, R=26 Mm, L=600 Mm, (mat.: Ss-310), Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield: R=24.5mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Shield For Tube Dia 44.5mm Shield Id 44.5mm Length 2100mm, Material: Ss304, Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield For Offset Bend Of Ltsh Terminal Tube: R=24mm, L=350mm, T=3.0mm, Material: Ss304, Clip For Tube Shield Of Tube Dia 47.63mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 38.1mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 51mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 63.5mm, Mat: Ss304, Cassette Baffle Economiser Coil (upper), Mat: Ss304, Cassette Baffle Economiser Coil (lower), Mat: Ss304, Cassette Baffle Ltsh Coil (lower), Mat: Ss 304, L-plate For Eco Coil (lower), Width-600 Mm, Length-1775mm, Thickness-2.5 Mm, Mat-ss 304, L-plate For Eco Coil (upper), Width-600 Mm, Length-2230 Mm, Thickness-2.5 Mm, Mat-ss 304, Ss Rod, Dia.10mm, Mat-ss 304, Cassette Baffle Top Plate For Eco Coil, Size-260x50 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate., Cassette Baffle Top Plate For Ltsh Coil, Size-610x58.5 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate, Half Round Tube Shield For Extended Water Wall Tube Having Outside Dia-63.5 Mm, Id-67 Mm, Length-2000 Mm, Thickness-3 Mm, Material: Ss304, Cassette Baffle Ltsh Coil (upper), Material: Ss304, M.s Welded Wire Net, Swg8, Mesh Size:2" X 2"(inches)width Of Net-4(feet), Weight Of 1roll-70 Kg(approx), Rod, Dia 6mm, L=200mm, Material: Ms For Insulation And Pressure Parts Of Boiler. (spares For Boiler), Half Round Tube Shield For Economiser Tube Od:38.1mm-tube Shield Radius: R=19.5mm, L=1670mm, T=3.0mm, Material: Ss304, Clip For Tube 44.5mm, Clip Height - 30mm, Material: Ss304, Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t1), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material- Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t2), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material-ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ww Screen Tube Bend Near Outlet Header, Shield Id=64 Mm, L-280mm, Thickness - 3mm, Mat: Ss-304 (for Ww Screen Tube Dia. Of 63.5mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Tube Od:47.63mm-tube Shield For Bifurcate Tube Bend:shield Id=48.0 Mm, L=500mm,t=3.0mm, Material: Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Bp Screen Tube Bend Near Roof, Shield Id=52 Mm, L-280mm, Thickness-3mm, Mat: Ss 304 (for Bp Screen Tube Dia. Of 51mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Inner Tube Shield For 90° Bend, Shield Id=38.5 Mm, L1=630 Mm (half Round Tube Shield For Eco. Tube Od: 38.1 Mm (mat.: Ss-304), Bend Radius - R 152.0 Mm, Outer Tube Shield For 90-degree Bend (for Eco. Tube Dia 38.1 Mm) Shield Id=38.5 Mm, L1=630mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Outer Tube Shield For 90° Bend (for Ltsh Tube Dia 47.63) Shield Id = 48.0 Mm, L1=600mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Fin For Water Wall: 12.7mm X 6mm (material:is2062gra), Woven Fabric Ss Net Material-304mesh Wire Dia - 4 Mm Length-1895 Mm Width-450 Mm Screen Size: 14 Mm X 14 Mm, Half Round Shield For Aph Main Bracing, Shield Id- Dia 168.3, Thk-3 Mm, Material-ss 304, Length-1000 Mm. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Bokaro.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply woven fabric,welded wire,outer tube,wire net,ss rod items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Damodar Valley Corporation DVC

To register an eligible bid for these woven fabric,welded wire,outer tube,wire net,ss rod contracts, companies must prepare their core compliance documents. Vendors operating across Jharkhand must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality woven fabric,welded wire,outer tube,wire net,ss rod solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Bokaro region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, Procurement Of Protection Shields And Other Pp Consumables For Boiler Tubes At Btps, As Per Technical Data Half Round Tube Shield For Ww Screen Tube Od:63.5mmtube Shield: R=32mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Tube Shield For Bp Screen Tube Od:51mmtube Shield: R=26mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Bend Tube Shield For Sh/rh Steam Cooled Spacer Tube Having Outer Dia:51mm, Shield Thickness5mm And Its 2 No. Locking Clamp Bend Tube Shield, R=26 Mm, L=600 Mm, (mat.: Ss-310), Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield: R=24.5mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Shield For Tube Dia 44.5mm Shield Id 44.5mm Length 2100mm, Material: Ss304, Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield For Offset Bend Of Ltsh Terminal Tube: R=24mm, L=350mm, T=3.0mm, Material: Ss304, Clip For Tube Shield Of Tube Dia 47.63mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 38.1mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 51mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 63.5mm, Mat: Ss304, Cassette Baffle Economiser Coil (upper), Mat: Ss304, Cassette Baffle Economiser Coil (lower), Mat: Ss304, Cassette Baffle Ltsh Coil (lower), Mat: Ss 304, L-plate For Eco Coil (lower), Width-600 Mm, Length-1775mm, Thickness-2.5 Mm, Mat-ss 304, L-plate For Eco Coil (upper), Width-600 Mm, Length-2230 Mm, Thickness-2.5 Mm, Mat-ss 304, Ss Rod, Dia.10mm, Mat-ss 304, Cassette Baffle Top Plate For Eco Coil, Size-260x50 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate., Cassette Baffle Top Plate For Ltsh Coil, Size-610x58.5 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate, Half Round Tube Shield For Extended Water Wall Tube Having Outside Dia-63.5 Mm, Id-67 Mm, Length-2000 Mm, Thickness-3 Mm, Material: Ss304, Cassette Baffle Ltsh Coil (upper), Material: Ss304, M.s Welded Wire Net, Swg8, Mesh Size:2" X 2"(inches)width Of Net-4(feet), Weight Of 1roll-70 Kg(approx), Rod, Dia 6mm, L=200mm, Material: Ms For Insulation And Pressure Parts Of Boiler. (spares For Boiler), Half Round Tube Shield For Economiser Tube Od:38.1mm-tube Shield Radius: R=19.5mm, L=1670mm, T=3.0mm, Material: Ss304, Clip For Tube 44.5mm, Clip Height - 30mm, Material: Ss304, Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t1), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material- Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t2), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material-ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ww Screen Tube Bend Near Outlet Header, Shield Id=64 Mm, L-280mm, Thickness - 3mm, Mat: Ss-304 (for Ww Screen Tube Dia. Of 63.5mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Tube Od:47.63mm-tube Shield For Bifurcate Tube Bend:shield Id=48.0 Mm, L=500mm,t=3.0mm, Material: Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Bp Screen Tube Bend Near Roof, Shield Id=52 Mm, L-280mm, Thickness-3mm, Mat: Ss 304 (for Bp Screen Tube Dia. Of 51mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Inner Tube Shield For 90° Bend, Shield Id=38.5 Mm, L1=630 Mm (half Round Tube Shield For Eco. Tube Od: 38.1 Mm (mat.: Ss-304), Bend Radius - R 152.0 Mm, Outer Tube Shield For 90-degree Bend (for Eco. Tube Dia 38.1 Mm) Shield Id=38.5 Mm, L1=630mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Outer Tube Shield For 90° Bend (for Ltsh Tube Dia 47.63) Shield Id = 48.0 Mm, L1=600mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Fin For Water Wall: 12.7mm X 6mm (material:is2062gra), Woven Fabric Ss Net Material-304mesh Wire Dia - 4 Mm Length-1895 Mm Width-450 Mm Screen Size: 14 Mm X 14 Mm, Half Round Shield For Aph Main Bracing, Shield Id- Dia 168.3, Thk-3 Mm, Material-ss 304, Length-1000 Mm by Damodar Valley Corporation DVC

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, Procurement Of Protection Shields And Other Pp Consumables For Boiler Tubes At Btps, As Per Technical Data Half Round Tube Shield For Ww Screen Tube Od:63.5mmtube Shield: R=32mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Tube Shield For Bp Screen Tube Od:51mmtube Shield: R=26mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Bend Tube Shield For Sh/rh Steam Cooled Spacer Tube Having Outer Dia:51mm, Shield Thickness5mm And Its 2 No. Locking Clamp Bend Tube Shield, R=26 Mm, L=600 Mm, (mat.: Ss-310), Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield: R=24.5mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Shield For Tube Dia 44.5mm Shield Id 44.5mm Length 2100mm, Material: Ss304, Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield For Offset Bend Of Ltsh Terminal Tube: R=24mm, L=350mm, T=3.0mm, Material: Ss304, Clip For Tube Shield Of Tube Dia 47.63mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 38.1mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 51mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 63.5mm, Mat: Ss304, Cassette Baffle Economiser Coil (upper), Mat: Ss304, Cassette Baffle Economiser Coil (lower), Mat: Ss304, Cassette Baffle Ltsh Coil (lower), Mat: Ss 304, L-plate For Eco Coil (lower), Width-600 Mm, Length-1775mm, Thickness-2.5 Mm, Mat-ss 304, L-plate For Eco Coil (upper), Width-600 Mm, Length-2230 Mm, Thickness-2.5 Mm, Mat-ss 304, Ss Rod, Dia.10mm, Mat-ss 304, Cassette Baffle Top Plate For Eco Coil, Size-260x50 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate., Cassette Baffle Top Plate For Ltsh Coil, Size-610x58.5 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate, Half Round Tube Shield For Extended Water Wall Tube Having Outside Dia-63.5 Mm, Id-67 Mm, Length-2000 Mm, Thickness-3 Mm, Material: Ss304, Cassette Baffle Ltsh Coil (upper), Material: Ss304, M.s Welded Wire Net, Swg8, Mesh Size:2" X 2"(inches)width Of Net-4(feet), Weight Of 1roll-70 Kg(approx), Rod, Dia 6mm, L=200mm, Material: Ms For Insulation And Pressure Parts Of Boiler. (spares For Boiler), Half Round Tube Shield For Economiser Tube Od:38.1mm-tube Shield Radius: R=19.5mm, L=1670mm, T=3.0mm, Material: Ss304, Clip For Tube 44.5mm, Clip Height - 30mm, Material: Ss304, Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t1), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material- Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t2), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material-ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ww Screen Tube Bend Near Outlet Header, Shield Id=64 Mm, L-280mm, Thickness - 3mm, Mat: Ss-304 (for Ww Screen Tube Dia. Of 63.5mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Tube Od:47.63mm-tube Shield For Bifurcate Tube Bend:shield Id=48.0 Mm, L=500mm,t=3.0mm, Material: Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Bp Screen Tube Bend Near Roof, Shield Id=52 Mm, L-280mm, Thickness-3mm, Mat: Ss 304 (for Bp Screen Tube Dia. Of 51mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Inner Tube Shield For 90° Bend, Shield Id=38.5 Mm, L1=630 Mm (half Round Tube Shield For Eco. Tube Od: 38.1 Mm (mat.: Ss-304), Bend Radius - R 152.0 Mm, Outer Tube Shield For 90-degree Bend (for Eco. Tube Dia 38.1 Mm) Shield Id=38.5 Mm, L1=630mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Outer Tube Shield For 90° Bend (for Ltsh Tube Dia 47.63) Shield Id = 48.0 Mm, L1=600mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Fin For Water Wall: 12.7mm X 6mm (material:is2062gra), Woven Fabric Ss Net Material-304mesh Wire Dia - 4 Mm Length-1895 Mm Width-450 Mm Screen Size: 14 Mm X 14 Mm, Half Round Shield For Aph Main Bracing, Shield Id- Dia 168.3, Thk-3 Mm, Material-ss 304, Length-1000 Mm within the Jharkhand jurisdiction

The official timeline and deadline details for Tender For 1300068710 , 1300068709 , 1300068719 , 1300068711 , 1300002130 , 1300068715 , 1300068724 , 1300068723 , 1300068721 , 1300068722 , 1300064397 , 1300064383 , 1300064402 , 1300065382 , 1300065383 , 1300064435 , 1300065380 , 1300065381 , 1300065392 , 1300064393 , 1100006201 , 1300010432 , 1300068716 , 1300002558 , 1300065379 , 1300065378 , 1300064452 , 1300068712 , 1300064438 , 1300011594 , 1300011592 , 1300068717 , 1300064375 , 1300064519 , 1300038438, Procurement Of Protection Shields And Other Pp Consumables For Boiler Tubes At Btps, As Per Technical Data Half Round Tube Shield For Ww Screen Tube Od:63.5mmtube Shield: R=32mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Tube Shield For Bp Screen Tube Od:51mmtube Shield: R=26mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Bend Tube Shield For Sh/rh Steam Cooled Spacer Tube Having Outer Dia:51mm, Shield Thickness5mm And Its 2 No. Locking Clamp Bend Tube Shield, R=26 Mm, L=600 Mm, (mat.: Ss-310), Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield: R=24.5mm, L=1500mm, T=3.0mm, Material: Ss304, Half Round Shield For Tube Dia 44.5mm Shield Id 44.5mm Length 2100mm, Material: Ss304, Half Round Tube Shield For Ltshtube Od:47.63mmtube Shield For Offset Bend Of Ltsh Terminal Tube: R=24mm, L=350mm, T=3.0mm, Material: Ss304, Clip For Tube Shield Of Tube Dia 47.63mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 38.1mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 51mm, Mat: Ss304, Clip For Tube Shield Of Tube Dia 63.5mm, Mat: Ss304, Cassette Baffle Economiser Coil (upper), Mat: Ss304, Cassette Baffle Economiser Coil (lower), Mat: Ss304, Cassette Baffle Ltsh Coil (lower), Mat: Ss 304, L-plate For Eco Coil (lower), Width-600 Mm, Length-1775mm, Thickness-2.5 Mm, Mat-ss 304, L-plate For Eco Coil (upper), Width-600 Mm, Length-2230 Mm, Thickness-2.5 Mm, Mat-ss 304, Ss Rod, Dia.10mm, Mat-ss 304, Cassette Baffle Top Plate For Eco Coil, Size-260x50 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate., Cassette Baffle Top Plate For Ltsh Coil, Size-610x58.5 Mm, Thickness-2.5 Mm, Mat-ss 304 With Two Edges Rounded Of One Side Of Plate, Half Round Tube Shield For Extended Water Wall Tube Having Outside Dia-63.5 Mm, Id-67 Mm, Length-2000 Mm, Thickness-3 Mm, Material: Ss304, Cassette Baffle Ltsh Coil (upper), Material: Ss304, M.s Welded Wire Net, Swg8, Mesh Size:2" X 2"(inches)width Of Net-4(feet), Weight Of 1roll-70 Kg(approx), Rod, Dia 6mm, L=200mm, Material: Ms For Insulation And Pressure Parts Of Boiler. (spares For Boiler), Half Round Tube Shield For Economiser Tube Od:38.1mm-tube Shield Radius: R=19.5mm, L=1670mm, T=3.0mm, Material: Ss304, Clip For Tube 44.5mm, Clip Height - 30mm, Material: Ss304, Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t1), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material- Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Inlet Header Offset Bend (t2), Od-47.63 Mm, Shield Id=48.0 Mm, Shield Thickness-3 Mm And Material-ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ww Screen Tube Bend Near Outlet Header, Shield Id=64 Mm, L-280mm, Thickness - 3mm, Mat: Ss-304 (for Ww Screen Tube Dia. Of 63.5mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Ltsh Tube Od:47.63mm-tube Shield For Bifurcate Tube Bend:shield Id=48.0 Mm, L=500mm,t=3.0mm, Material: Ss 304 (drg No-mtps/7&8/blr/2023/032, Rev-00), Half Round Tube Shield For Bp Screen Tube Bend Near Roof, Shield Id=52 Mm, L-280mm, Thickness-3mm, Mat: Ss 304 (for Bp Screen Tube Dia. Of 51mm) (drg No-mtps/7&8/blr/2023/032, Rev-00), Inner Tube Shield For 90° Bend, Shield Id=38.5 Mm, L1=630 Mm (half Round Tube Shield For Eco. Tube Od: 38.1 Mm (mat.: Ss-304), Bend Radius - R 152.0 Mm, Outer Tube Shield For 90-degree Bend (for Eco. Tube Dia 38.1 Mm) Shield Id=38.5 Mm, L1=630mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Outer Tube Shield For 90° Bend (for Ltsh Tube Dia 47.63) Shield Id = 48.0 Mm, L1=600mm, Material - Ss 304, Bend Radius - R 152.0 Mm, Fin For Water Wall: 12.7mm X 6mm (material:is2062gra), Woven Fabric Ss Net Material-304mesh Wire Dia - 4 Mm Length-1895 Mm Width-450 Mm Screen Size: 14 Mm X 14 Mm, Half Round Shield For Aph Main Bracing, Shield Id- Dia 168.3, Thk-3 Mm, Material-ss 304, Length-1000 Mm are available inside the detailed notification files. Bidders planning to target this contract in Bokaro should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.