tender for workstation, modular furniture: workstation as per the following specification:- 1. the workstation shall b e made of 19 mm thick commercial grade teak plywood for the tabletop and main structural members. 2. si de panels, partitions, and other components shall be made of 12 mm to 16 mm thick teak plywood. 3.lami nation: all exposed surfaces shall be finished with 1 mm thick decorative laminate of approved make and s hade on the top surface and 0.8 mm laminate on vertical surfaces. inner surfaces shall be finished with whi te laminate or paint polish. 4.edge finishing: all exposed edges shall be finished with 2 mm pvc edge band ing using hot press technology to ensure durability and smooth finish. 5.dimensions: standard workstation size approximately 1200 mm (l) x 600 mm (w) x 750 mm (h) or as per site requirement. 6.partition panels: partitions made of teak plywood frame with laminated finish and it should be of standard size 7. height app roximately 1200 mm above floor level or as per requirement. 8. keyboard tray: one sliding keyboard tray made of teak plywood with telescopic channels shall be provided. 9. cable management: provision for cabl e manager and grommet holes for proper routing of electrical and data cables. 10. storage unit: one side d rawer unit (2 or 3 drawers) made of teak plywood with telescopic drawer channels and locking arrangement . 11. hardware & fittings: all fittings such as handles, channels, locks, screws, and accessories shall be of s tandard make and good quality. 12. polishing & finish: the workstation shall have smooth laminated finish with proper alignment and sturdy construction, ensuring durability and neat appearance 13. workstation u nit should be singular, however, after installation; each workstation should be aligned without any gap. it s hould feel that the workstations are joined. 14. warranty period 60 month(s) from the date of supply. mater ial compliance submit sample/ply certificate showing commercial grade teak plywood and thicknesses (19 mm) laminate brand approval: require vendor to propose laminate make/shade for approval before fabrica tion. edge band adhesion: specify no visible gaps/lifting after 72 hours; hot-press application only. drawer p erformance: smooth full-extension on telescopic channels; lock engages securely; no binding. cable gromm ets: location to be marked on approved drawing edges deburred; grommets supplied and fitted. tolerance and alignment panel gaps uniform; doors/drawers flush; tabletop level within plus minus 2 mm over 1200 mm. installation: site protection, debris removal, and final cleaning included. note:-the detailed drawing a nd final dimensions of the workstation shall be finalized in consultation with special repair dpo/rnc after award of the work, keeping in view the site conditions and functional requirements. the successful firm shall manufactur e and installation the workstations strictly as per the approved drawing and specifications. - warranty period: 60 months after the date of delivery

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding modular furniture,cable management,debris removal,special repair,keyboard tray,construction,cleaning parameters and guide you on how to coordinate efficiently with the procurement team of South Eastern Railway SER

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For Workstation, Modular Furniture: Workstation As Per The Following Specification:- 1. The Workstation Shall B E Made Of 19 Mm Thick Commercial Grade Teak Plywood For The Tabletop And Main Structural Members. 2. Si De Panels, Partitions, And Other Components Shall Be Made Of 12 Mm To 16 Mm Thick Teak Plywood. 3.lami Nation: All Exposed Surfaces Shall Be Finished With 1 Mm Thick Decorative Laminate Of Approved Make And S Hade On The Top Surface And 0.8 Mm Laminate On Vertical Surfaces. Inner Surfaces Shall Be Finished With Whi Te Laminate Or Paint Polish. 4.edge Finishing: All Exposed Edges Shall Be Finished With 2 Mm Pvc Edge Band Ing Using Hot Press Technology To Ensure Durability And Smooth Finish. 5.dimensions: Standard Workstation Size Approximately 1200 Mm (l) X 600 Mm (w) X 750 Mm (h) Or As Per Site Requirement. 6.partition Panels: Partitions Made Of Teak Plywood Frame With Laminated Finish And It Should Be Of Standard Size 7. Height App Roximately 1200 Mm Above Floor Level Or As Per Requirement. 8. Keyboard Tray: One Sliding Keyboard Tray Made Of Teak Plywood With Telescopic Channels Shall Be Provided. 9. Cable Management: Provision For Cabl E Manager And Grommet Holes For Proper Routing Of Electrical And Data Cables. 10. Storage Unit: One Side D Rawer Unit (2 Or 3 Drawers) Made Of Teak Plywood With Telescopic Drawer Channels And Locking Arrangement . 11. Hardware & Fittings: All Fittings Such As Handles, Channels, Locks, Screws, And Accessories Shall Be Of S Tandard Make And Good Quality. 12. Polishing & Finish: The Workstation Shall Have Smooth Laminated Finish With Proper Alignment And Sturdy Construction, Ensuring Durability And Neat Appearance 13. Workstation U Nit Should Be Singular, However, After Installation; Each Workstation Should Be Aligned Without Any Gap. It S Hould Feel That The Workstations Are Joined. 14. Warranty Period 60 Month(s) From The Date Of Supply. Mater Ial Compliance Submit Sample/ply Certificate Showing Commercial Grade Teak Plywood And Thicknesses (19 Mm) Laminate Brand Approval: Require Vendor To Propose Laminate Make/shade For Approval Before Fabrica Tion. Edge Band Adhesion: Specify No Visible Gaps/lifting After 72 Hours; Hot-press Application Only. Drawer P Erformance: Smooth Full-extension On Telescopic Channels; Lock Engages Securely; No Binding. Cable Gromm Ets: Location To Be Marked On Approved Drawing Edges Deburred; Grommets Supplied And Fitted. Tolerance And Alignment Panel Gaps Uniform; Doors/drawers Flush; Tabletop Level Within Plus Minus 2 Mm Over 1200 Mm. Installation: Site Protection, Debris Removal, And Final Cleaning Included. Note:-the Detailed Drawing A Nd Final Dimensions Of The Workstation Shall Be Finalized In Consultation With Special Repair Dpo/rnc After Award Of The Work, Keeping In View The Site Conditions And Functional Requirements. The Successful Firm Shall Manufactur E And Installation The Workstations Strictly As Per The Approved Drawing And Specifications. - Warranty Period: 60 Months After The Date Of Delivery . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by South Eastern Railway SER.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For Workstation, Modular Furniture: Workstation As Per The Following Specification:- 1. The Workstation Shall B E Made Of 19 Mm Thick Commercial Grade Teak Plywood For The Tabletop And Main Structural Members. 2. Si De Panels, Partitions, And Other Components Shall Be Made Of 12 Mm To 16 Mm Thick Teak Plywood. 3.lami Nation: All Exposed Surfaces Shall Be Finished With 1 Mm Thick Decorative Laminate Of Approved Make And S Hade On The Top Surface And 0.8 Mm Laminate On Vertical Surfaces. Inner Surfaces Shall Be Finished With Whi Te Laminate Or Paint Polish. 4.edge Finishing: All Exposed Edges Shall Be Finished With 2 Mm Pvc Edge Band Ing Using Hot Press Technology To Ensure Durability And Smooth Finish. 5.dimensions: Standard Workstation Size Approximately 1200 Mm (l) X 600 Mm (w) X 750 Mm (h) Or As Per Site Requirement. 6.partition Panels: Partitions Made Of Teak Plywood Frame With Laminated Finish And It Should Be Of Standard Size 7. Height App Roximately 1200 Mm Above Floor Level Or As Per Requirement. 8. Keyboard Tray: One Sliding Keyboard Tray Made Of Teak Plywood With Telescopic Channels Shall Be Provided. 9. Cable Management: Provision For Cabl E Manager And Grommet Holes For Proper Routing Of Electrical And Data Cables. 10. Storage Unit: One Side D Rawer Unit (2 Or 3 Drawers) Made Of Teak Plywood With Telescopic Drawer Channels And Locking Arrangement . 11. Hardware & Fittings: All Fittings Such As Handles, Channels, Locks, Screws, And Accessories Shall Be Of S Tandard Make And Good Quality. 12. Polishing & Finish: The Workstation Shall Have Smooth Laminated Finish With Proper Alignment And Sturdy Construction, Ensuring Durability And Neat Appearance 13. Workstation U Nit Should Be Singular, However, After Installation; Each Workstation Should Be Aligned Without Any Gap. It S Hould Feel That The Workstations Are Joined. 14. Warranty Period 60 Month(s) From The Date Of Supply. Mater Ial Compliance Submit Sample/ply Certificate Showing Commercial Grade Teak Plywood And Thicknesses (19 Mm) Laminate Brand Approval: Require Vendor To Propose Laminate Make/shade For Approval Before Fabrica Tion. Edge Band Adhesion: Specify No Visible Gaps/lifting After 72 Hours; Hot-press Application Only. Drawer P Erformance: Smooth Full-extension On Telescopic Channels; Lock Engages Securely; No Binding. Cable Gromm Ets: Location To Be Marked On Approved Drawing Edges Deburred; Grommets Supplied And Fitted. Tolerance And Alignment Panel Gaps Uniform; Doors/drawers Flush; Tabletop Level Within Plus Minus 2 Mm Over 1200 Mm. Installation: Site Protection, Debris Removal, And Final Cleaning Included. Note:-the Detailed Drawing A Nd Final Dimensions Of The Workstation Shall Be Finalized In Consultation With Special Repair Dpo/rnc After Award Of The Work, Keeping In View The Site Conditions And Functional Requirements. The Successful Firm Shall Manufactur E And Installation The Workstations Strictly As Per The Approved Drawing And Specifications. - Warranty Period: 60 Months After The Date Of Delivery in Jharkhand.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For Workstation, Modular Furniture: Workstation As Per The Following Specification:- 1. The Workstation Shall B E Made Of 19 Mm Thick Commercial Grade Teak Plywood For The Tabletop And Main Structural Members. 2. Si De Panels, Partitions, And Other Components Shall Be Made Of 12 Mm To 16 Mm Thick Teak Plywood. 3.lami Nation: All Exposed Surfaces Shall Be Finished With 1 Mm Thick Decorative Laminate Of Approved Make And S Hade On The Top Surface And 0.8 Mm Laminate On Vertical Surfaces. Inner Surfaces Shall Be Finished With Whi Te Laminate Or Paint Polish. 4.edge Finishing: All Exposed Edges Shall Be Finished With 2 Mm Pvc Edge Band Ing Using Hot Press Technology To Ensure Durability And Smooth Finish. 5.dimensions: Standard Workstation Size Approximately 1200 Mm (l) X 600 Mm (w) X 750 Mm (h) Or As Per Site Requirement. 6.partition Panels: Partitions Made Of Teak Plywood Frame With Laminated Finish And It Should Be Of Standard Size 7. Height App Roximately 1200 Mm Above Floor Level Or As Per Requirement. 8. Keyboard Tray: One Sliding Keyboard Tray Made Of Teak Plywood With Telescopic Channels Shall Be Provided. 9. Cable Management: Provision For Cabl E Manager And Grommet Holes For Proper Routing Of Electrical And Data Cables. 10. Storage Unit: One Side D Rawer Unit (2 Or 3 Drawers) Made Of Teak Plywood With Telescopic Drawer Channels And Locking Arrangement . 11. Hardware & Fittings: All Fittings Such As Handles, Channels, Locks, Screws, And Accessories Shall Be Of S Tandard Make And Good Quality. 12. Polishing & Finish: The Workstation Shall Have Smooth Laminated Finish With Proper Alignment And Sturdy Construction, Ensuring Durability And Neat Appearance 13. Workstation U Nit Should Be Singular, However, After Installation; Each Workstation Should Be Aligned Without Any Gap. It S Hould Feel That The Workstations Are Joined. 14. Warranty Period 60 Month(s) From The Date Of Supply. Mater Ial Compliance Submit Sample/ply Certificate Showing Commercial Grade Teak Plywood And Thicknesses (19 Mm) Laminate Brand Approval: Require Vendor To Propose Laminate Make/shade For Approval Before Fabrica Tion. Edge Band Adhesion: Specify No Visible Gaps/lifting After 72 Hours; Hot-press Application Only. Drawer P Erformance: Smooth Full-extension On Telescopic Channels; Lock Engages Securely; No Binding. Cable Gromm Ets: Location To Be Marked On Approved Drawing Edges Deburred; Grommets Supplied And Fitted. Tolerance And Alignment Panel Gaps Uniform; Doors/drawers Flush; Tabletop Level Within Plus Minus 2 Mm Over 1200 Mm. Installation: Site Protection, Debris Removal, And Final Cleaning Included. Note:-the Detailed Drawing A Nd Final Dimensions Of The Workstation Shall Be Finalized In Consultation With Special Repair Dpo/rnc After Award Of The Work, Keeping In View The Site Conditions And Functional Requirements. The Successful Firm Shall Manufactur E And Installation The Workstations Strictly As Per The Approved Drawing And Specifications. - Warranty Period: 60 Months After The Date Of Delivery. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Ranchi.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply modular furniture,cable management,debris removal,special repair,keyboard tray,construction,cleaning items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by South Eastern Railway SER

To register an eligible bid for these modular furniture,cable management,debris removal,special repair,keyboard tray,construction,cleaning contracts, companies must prepare their core compliance documents. Vendors operating across Jharkhand must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality modular furniture,cable management,debris removal,special repair,keyboard tray,construction,cleaning solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Ranchi region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For Workstation, Modular Furniture: Workstation As Per The Following Specification:- 1. The Workstation Shall B E Made Of 19 Mm Thick Commercial Grade Teak Plywood For The Tabletop And Main Structural Members. 2. Si De Panels, Partitions, And Other Components Shall Be Made Of 12 Mm To 16 Mm Thick Teak Plywood. 3.lami Nation: All Exposed Surfaces Shall Be Finished With 1 Mm Thick Decorative Laminate Of Approved Make And S Hade On The Top Surface And 0.8 Mm Laminate On Vertical Surfaces. Inner Surfaces Shall Be Finished With Whi Te Laminate Or Paint Polish. 4.edge Finishing: All Exposed Edges Shall Be Finished With 2 Mm Pvc Edge Band Ing Using Hot Press Technology To Ensure Durability And Smooth Finish. 5.dimensions: Standard Workstation Size Approximately 1200 Mm (l) X 600 Mm (w) X 750 Mm (h) Or As Per Site Requirement. 6.partition Panels: Partitions Made Of Teak Plywood Frame With Laminated Finish And It Should Be Of Standard Size 7. Height App Roximately 1200 Mm Above Floor Level Or As Per Requirement. 8. Keyboard Tray: One Sliding Keyboard Tray Made Of Teak Plywood With Telescopic Channels Shall Be Provided. 9. Cable Management: Provision For Cabl E Manager And Grommet Holes For Proper Routing Of Electrical And Data Cables. 10. Storage Unit: One Side D Rawer Unit (2 Or 3 Drawers) Made Of Teak Plywood With Telescopic Drawer Channels And Locking Arrangement . 11. Hardware & Fittings: All Fittings Such As Handles, Channels, Locks, Screws, And Accessories Shall Be Of S Tandard Make And Good Quality. 12. Polishing & Finish: The Workstation Shall Have Smooth Laminated Finish With Proper Alignment And Sturdy Construction, Ensuring Durability And Neat Appearance 13. Workstation U Nit Should Be Singular, However, After Installation; Each Workstation Should Be Aligned Without Any Gap. It S Hould Feel That The Workstations Are Joined. 14. Warranty Period 60 Month(s) From The Date Of Supply. Mater Ial Compliance Submit Sample/ply Certificate Showing Commercial Grade Teak Plywood And Thicknesses (19 Mm) Laminate Brand Approval: Require Vendor To Propose Laminate Make/shade For Approval Before Fabrica Tion. Edge Band Adhesion: Specify No Visible Gaps/lifting After 72 Hours; Hot-press Application Only. Drawer P Erformance: Smooth Full-extension On Telescopic Channels; Lock Engages Securely; No Binding. Cable Gromm Ets: Location To Be Marked On Approved Drawing Edges Deburred; Grommets Supplied And Fitted. Tolerance And Alignment Panel Gaps Uniform; Doors/drawers Flush; Tabletop Level Within Plus Minus 2 Mm Over 1200 Mm. Installation: Site Protection, Debris Removal, And Final Cleaning Included. Note:-the Detailed Drawing A Nd Final Dimensions Of The Workstation Shall Be Finalized In Consultation With Special Repair Dpo/rnc After Award Of The Work, Keeping In View The Site Conditions And Functional Requirements. The Successful Firm Shall Manufactur E And Installation The Workstations Strictly As Per The Approved Drawing And Specifications. - Warranty Period: 60 Months After The Date Of Delivery by South Eastern Railway SER

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For Workstation, Modular Furniture: Workstation As Per The Following Specification:- 1. The Workstation Shall B E Made Of 19 Mm Thick Commercial Grade Teak Plywood For The Tabletop And Main Structural Members. 2. Si De Panels, Partitions, And Other Components Shall Be Made Of 12 Mm To 16 Mm Thick Teak Plywood. 3.lami Nation: All Exposed Surfaces Shall Be Finished With 1 Mm Thick Decorative Laminate Of Approved Make And S Hade On The Top Surface And 0.8 Mm Laminate On Vertical Surfaces. Inner Surfaces Shall Be Finished With Whi Te Laminate Or Paint Polish. 4.edge Finishing: All Exposed Edges Shall Be Finished With 2 Mm Pvc Edge Band Ing Using Hot Press Technology To Ensure Durability And Smooth Finish. 5.dimensions: Standard Workstation Size Approximately 1200 Mm (l) X 600 Mm (w) X 750 Mm (h) Or As Per Site Requirement. 6.partition Panels: Partitions Made Of Teak Plywood Frame With Laminated Finish And It Should Be Of Standard Size 7. Height App Roximately 1200 Mm Above Floor Level Or As Per Requirement. 8. Keyboard Tray: One Sliding Keyboard Tray Made Of Teak Plywood With Telescopic Channels Shall Be Provided. 9. Cable Management: Provision For Cabl E Manager And Grommet Holes For Proper Routing Of Electrical And Data Cables. 10. Storage Unit: One Side D Rawer Unit (2 Or 3 Drawers) Made Of Teak Plywood With Telescopic Drawer Channels And Locking Arrangement . 11. Hardware & Fittings: All Fittings Such As Handles, Channels, Locks, Screws, And Accessories Shall Be Of S Tandard Make And Good Quality. 12. Polishing & Finish: The Workstation Shall Have Smooth Laminated Finish With Proper Alignment And Sturdy Construction, Ensuring Durability And Neat Appearance 13. Workstation U Nit Should Be Singular, However, After Installation; Each Workstation Should Be Aligned Without Any Gap. It S Hould Feel That The Workstations Are Joined. 14. Warranty Period 60 Month(s) From The Date Of Supply. Mater Ial Compliance Submit Sample/ply Certificate Showing Commercial Grade Teak Plywood And Thicknesses (19 Mm) Laminate Brand Approval: Require Vendor To Propose Laminate Make/shade For Approval Before Fabrica Tion. Edge Band Adhesion: Specify No Visible Gaps/lifting After 72 Hours; Hot-press Application Only. Drawer P Erformance: Smooth Full-extension On Telescopic Channels; Lock Engages Securely; No Binding. Cable Gromm Ets: Location To Be Marked On Approved Drawing Edges Deburred; Grommets Supplied And Fitted. Tolerance And Alignment Panel Gaps Uniform; Doors/drawers Flush; Tabletop Level Within Plus Minus 2 Mm Over 1200 Mm. Installation: Site Protection, Debris Removal, And Final Cleaning Included. Note:-the Detailed Drawing A Nd Final Dimensions Of The Workstation Shall Be Finalized In Consultation With Special Repair Dpo/rnc After Award Of The Work, Keeping In View The Site Conditions And Functional Requirements. The Successful Firm Shall Manufactur E And Installation The Workstations Strictly As Per The Approved Drawing And Specifications. - Warranty Period: 60 Months After The Date Of Delivery within the Jharkhand jurisdiction

The official timeline and deadline details for Tender For Workstation, Modular Furniture: Workstation As Per The Following Specification:- 1. The Workstation Shall B E Made Of 19 Mm Thick Commercial Grade Teak Plywood For The Tabletop And Main Structural Members. 2. Si De Panels, Partitions, And Other Components Shall Be Made Of 12 Mm To 16 Mm Thick Teak Plywood. 3.lami Nation: All Exposed Surfaces Shall Be Finished With 1 Mm Thick Decorative Laminate Of Approved Make And S Hade On The Top Surface And 0.8 Mm Laminate On Vertical Surfaces. Inner Surfaces Shall Be Finished With Whi Te Laminate Or Paint Polish. 4.edge Finishing: All Exposed Edges Shall Be Finished With 2 Mm Pvc Edge Band Ing Using Hot Press Technology To Ensure Durability And Smooth Finish. 5.dimensions: Standard Workstation Size Approximately 1200 Mm (l) X 600 Mm (w) X 750 Mm (h) Or As Per Site Requirement. 6.partition Panels: Partitions Made Of Teak Plywood Frame With Laminated Finish And It Should Be Of Standard Size 7. Height App Roximately 1200 Mm Above Floor Level Or As Per Requirement. 8. Keyboard Tray: One Sliding Keyboard Tray Made Of Teak Plywood With Telescopic Channels Shall Be Provided. 9. Cable Management: Provision For Cabl E Manager And Grommet Holes For Proper Routing Of Electrical And Data Cables. 10. Storage Unit: One Side D Rawer Unit (2 Or 3 Drawers) Made Of Teak Plywood With Telescopic Drawer Channels And Locking Arrangement . 11. Hardware & Fittings: All Fittings Such As Handles, Channels, Locks, Screws, And Accessories Shall Be Of S Tandard Make And Good Quality. 12. Polishing & Finish: The Workstation Shall Have Smooth Laminated Finish With Proper Alignment And Sturdy Construction, Ensuring Durability And Neat Appearance 13. Workstation U Nit Should Be Singular, However, After Installation; Each Workstation Should Be Aligned Without Any Gap. It S Hould Feel That The Workstations Are Joined. 14. Warranty Period 60 Month(s) From The Date Of Supply. Mater Ial Compliance Submit Sample/ply Certificate Showing Commercial Grade Teak Plywood And Thicknesses (19 Mm) Laminate Brand Approval: Require Vendor To Propose Laminate Make/shade For Approval Before Fabrica Tion. Edge Band Adhesion: Specify No Visible Gaps/lifting After 72 Hours; Hot-press Application Only. Drawer P Erformance: Smooth Full-extension On Telescopic Channels; Lock Engages Securely; No Binding. Cable Gromm Ets: Location To Be Marked On Approved Drawing Edges Deburred; Grommets Supplied And Fitted. Tolerance And Alignment Panel Gaps Uniform; Doors/drawers Flush; Tabletop Level Within Plus Minus 2 Mm Over 1200 Mm. Installation: Site Protection, Debris Removal, And Final Cleaning Included. Note:-the Detailed Drawing A Nd Final Dimensions Of The Workstation Shall Be Finalized In Consultation With Special Repair Dpo/rnc After Award Of The Work, Keeping In View The Site Conditions And Functional Requirements. The Successful Firm Shall Manufactur E And Installation The Workstations Strictly As Per The Approved Drawing And Specifications. - Warranty Period: 60 Months After The Date Of Delivery are available inside the detailed notification files. Bidders planning to target this contract in Ranchi should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.