tender for mill fabrication work 1 , mill fabrication work 2 , mill fabrication work 3 , mill fabrication work 4 , mill fabrication work 5 , mill fabrication work 6 , mill fabrication work 7 , mill fabrication work 8 , mill fabrication work 9 , mill fabrication work 10 , mill fabrication work 11 , mill fabrication work 12 , mill fabrication work 13 , mill fabrication work 14 , mill fabrication work 15 , mill fabrication work 16 , mill fabrication work 17 , mill fabrication work 18 , mill fabrication work 19 , mill fabrication work 20 , mill fabrication work 21 , mill fabrication work 22 , mill fabrication work 23 , mill fabrication work 24 , mill fabrication work 25 , mill fabrication work 26 , mill fabrication work 27 , mill fabrication work 28 , mill fabrication work 29 , mill fabrication work 30 , mill fabrication work 31 , mill fabrication work 32 , mill fabrication work 33 , mill fabrication work 34 , mill fabrication work 35 , mill fabrication work 36 , mill fabrication work 37 , mill fabrication work 38 , mill fabrication work 39 , mill fabrication work 40 , mill fabrication work 41 , mill fabrication work 42, dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (8inch)., dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (6inch)., dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (4inch)., dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (3inch)., fabricate and installation bends at various locations in the mill house (6inch)., fabricate and installation bends at various locations in the mill house (4inch)., fabricate and installation flanges at various locations in the mill house (10inch)., fabricate and installation flanges at various locations in the mill house (8inch)., fabricate and installation flanges at various locations in the mill house (6inch)., fabricate and installation flanges at various locations in the mill house (4inch)., fabricate and installation flanges at various locations in the mill house (3inch)., fabricate and installation nipples at various locations in the mill house (8inch)., fabricate and installation nipples at various locations in the mill house (6inch)., fabricate and installation nipples at various locations in the mill house (3inch)., fabricate and installation nipples at various locations in the mill house (1inch)., fabricate and installation reducers at various locations in the mill house (8inch)., fabricate and installation reducers at various locations in the mill house (6inch)., replace the damaged side plates and bottom plates of the cane carrier, leveler, chopper, secondary rake carrier, and rake carrier with the supplied plates (6/8/10 mm thick plates)., cut and remove the old runners of the cane carrier, secondary rake carrier, and inter rake carrier, and installation new runners., remove the corroded angles, beams, and channels beneath the runners of the cane carrier supporting angle, secondary rake carrier, and inter rake carrier, and installation new angles in their place., cut and remove the old trough of the inter rake carrier and secondary rake carrier installed in the mill house, fabricate and installation a new trough using the supplied 8/10 mm plate as per instructions, and conduct a satisfactory trial., cut, remove, reinstall the mill hole trough., cut and remove the tray beneath the mill trpf, fabricate and installation a new tray using the supplied 10/12 mm thick plate, and conduct a satisfactory trial., fabricate new juice rings for the mill rollers using 6/8 mm thick plate as per the sample., dismantle the damaged side plate of the fibrizer, place it in the scrap yard, fabricate and installation new side plates using the supplied 8/10 mm thick plate as before, and conduct a satisfactory trial., cut and remove the worn bed of the tail shaft of the secondary rake carrier and fabricate and installation a new one using a supplied 200 mm beam., fabricate and installation a new guard for the mill crown pinion and place the old damaged guard in the scrap yard., remove the damaged angles of the side plates of the cane carrier, secondary rake carrier, and inter rake carrier, and installation new angles in their place., remove the damaged juice tray of the trpf rollers installed on the mill head stocks, place it in the scrap yard, fabricate a new tray from the supplied 8/10 mm plate, and installation it in its original position., remove the 12inch size header installed on the mill screen juice line, fabricate a new header as per the sample, complete all connections as before, and conduct a satisfactory trial., fabricate a new delivery header for the screen juice tank (10inch size, 2.1 m length) along with 8 and 10 nipples, fabricate and erect it as per the sample, and conduct a satisfactory trial., cut the damaged top cover of the mill trpf, cut the supplied 8/10 mm plate, fabricate it as per the sample, installation it in its original position using the supplied 8/10 mm plate., dismantle the trpf bottom cover of mill no. 2, place it in the scrap yard, fabricate a new cover from the supplied 8/10 mm plate, installation it in position, and conduct a trial., dismantle the weak and damaged plates on both sides and the back of the chute of mill no. 2 trpf installed in the mill house, place them in the scrap yard, fabricate and installation new plates using the supplied 10/12 mm thick plate as before, and conduct a satisfactory trial., remove the old and damaged rail of the crane unloader trolley, installation the supplied new rail (40 x 40 mm), strengthen it, and conduct a trial., fabricate and installation new covers for the mill bearing housing., fabricate and installation the juice distribution tray in the pipeline of the mill juice pumps., carry out welding of the mill trpf rollers and repair by installing and welding the cut side plate., repair the racks of the secondary and inter rake carriers., weld the cut tail bar of the mill and fabricate it to the required size., carry out pineapple chevron grooving and cutting work on the mill rollers., carry out on-site forging of the side links of the cane carrier, bagasse carrier, elevator, and rbc chain, and fit pins and bushes as required to achieve the specified size.

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding fabrication work,bearing housing,plate repair,side plate,bearing parameters and guide you on how to coordinate efficiently with the procurement team of Uttar Pradesh Cooperative Sugar Factories Federation Ltd UPCSFFL

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For Mill Fabrication Work 1 , Mill Fabrication Work 2 , Mill Fabrication Work 3 , Mill Fabrication Work 4 , Mill Fabrication Work 5 , Mill Fabrication Work 6 , Mill Fabrication Work 7 , Mill Fabrication Work 8 , Mill Fabrication Work 9 , Mill Fabrication Work 10 , Mill Fabrication Work 11 , Mill Fabrication Work 12 , Mill Fabrication Work 13 , Mill Fabrication Work 14 , Mill Fabrication Work 15 , Mill Fabrication Work 16 , Mill Fabrication Work 17 , Mill Fabrication Work 18 , Mill Fabrication Work 19 , Mill Fabrication Work 20 , Mill Fabrication Work 21 , Mill Fabrication Work 22 , Mill Fabrication Work 23 , Mill Fabrication Work 24 , Mill Fabrication Work 25 , Mill Fabrication Work 26 , Mill Fabrication Work 27 , Mill Fabrication Work 28 , Mill Fabrication Work 29 , Mill Fabrication Work 30 , Mill Fabrication Work 31 , Mill Fabrication Work 32 , Mill Fabrication Work 33 , Mill Fabrication Work 34 , Mill Fabrication Work 35 , Mill Fabrication Work 36 , Mill Fabrication Work 37 , Mill Fabrication Work 38 , Mill Fabrication Work 39 , Mill Fabrication Work 40 , Mill Fabrication Work 41 , Mill Fabrication Work 42, Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (8inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (6inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (4inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (3inch)., Fabricate And Installation Bends At Various Locations In The Mill House (6inch)., Fabricate And Installation Bends At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (10inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (8inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (6inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (8inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (6inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (1inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (8inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (6inch)., Replace The Damaged Side Plates And Bottom Plates Of The Cane Carrier, Leveler, Chopper, Secondary Rake Carrier, And Rake Carrier With The Supplied Plates (6/8/10 Mm Thick Plates)., Cut And Remove The Old Runners Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Runners., Remove The Corroded Angles, Beams, And Channels Beneath The Runners Of The Cane Carrier Supporting Angle, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Cut And Remove The Old Trough Of The Inter Rake Carrier And Secondary Rake Carrier Installed In The Mill House, Fabricate And Installation A New Trough Using The Supplied 8/10 Mm Plate As Per Instructions, And Conduct A Satisfactory Trial., Cut, Remove, Reinstall The Mill Hole Trough., Cut And Remove The Tray Beneath The Mill Trpf, Fabricate And Installation A New Tray Using The Supplied 10/12 Mm Thick Plate, And Conduct A Satisfactory Trial., Fabricate New Juice Rings For The Mill Rollers Using 6/8 Mm Thick Plate As Per The Sample., Dismantle The Damaged Side Plate Of The Fibrizer, Place It In The Scrap Yard, Fabricate And Installation New Side Plates Using The Supplied 8/10 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Cut And Remove The Worn Bed Of The Tail Shaft Of The Secondary Rake Carrier And Fabricate And Installation A New One Using A Supplied 200 Mm Beam., Fabricate And Installation A New Guard For The Mill Crown Pinion And Place The Old Damaged Guard In The Scrap Yard., Remove The Damaged Angles Of The Side Plates Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Remove The Damaged Juice Tray Of The Trpf Rollers Installed On The Mill Head Stocks, Place It In The Scrap Yard, Fabricate A New Tray From The Supplied 8/10 Mm Plate, And Installation It In Its Original Position., Remove The 12inch Size Header Installed On The Mill Screen Juice Line, Fabricate A New Header As Per The Sample, Complete All Connections As Before, And Conduct A Satisfactory Trial., Fabricate A New Delivery Header For The Screen Juice Tank (10inch Size, 2.1 M Length) Along With 8 And 10 Nipples, Fabricate And Erect It As Per The Sample, And Conduct A Satisfactory Trial., Cut The Damaged Top Cover Of The Mill Trpf, Cut The Supplied 8/10 Mm Plate, Fabricate It As Per The Sample, Installation It In Its Original Position Using The Supplied 8/10 Mm Plate., Dismantle The Trpf Bottom Cover Of Mill No. 2, Place It In The Scrap Yard, Fabricate A New Cover From The Supplied 8/10 Mm Plate, Installation It In Position, And Conduct A Trial., Dismantle The Weak And Damaged Plates On Both Sides And The Back Of The Chute Of Mill No. 2 Trpf Installed In The Mill House, Place Them In The Scrap Yard, Fabricate And Installation New Plates Using The Supplied 10/12 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Remove The Old And Damaged Rail Of The Crane Unloader Trolley, Installation The Supplied New Rail (40 X 40 Mm), Strengthen It, And Conduct A Trial., Fabricate And Installation New Covers For The Mill Bearing Housing., Fabricate And Installation The Juice Distribution Tray In The Pipeline Of The Mill Juice Pumps., Carry Out Welding Of The Mill Trpf Rollers And Repair By Installing And Welding The Cut Side Plate., Repair The Racks Of The Secondary And Inter Rake Carriers., Weld The Cut Tail Bar Of The Mill And Fabricate It To The Required Size., Carry Out Pineapple Chevron Grooving And Cutting Work On The Mill Rollers., Carry Out On-site Forging Of The Side Links Of The Cane Carrier, Bagasse Carrier, Elevator, And Rbc Chain, And Fit Pins And Bushes As Required To Achieve The Specified Size. . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Uttar Pradesh Cooperative Sugar Factories Federation Ltd UPCSFFL.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For Mill Fabrication Work 1 , Mill Fabrication Work 2 , Mill Fabrication Work 3 , Mill Fabrication Work 4 , Mill Fabrication Work 5 , Mill Fabrication Work 6 , Mill Fabrication Work 7 , Mill Fabrication Work 8 , Mill Fabrication Work 9 , Mill Fabrication Work 10 , Mill Fabrication Work 11 , Mill Fabrication Work 12 , Mill Fabrication Work 13 , Mill Fabrication Work 14 , Mill Fabrication Work 15 , Mill Fabrication Work 16 , Mill Fabrication Work 17 , Mill Fabrication Work 18 , Mill Fabrication Work 19 , Mill Fabrication Work 20 , Mill Fabrication Work 21 , Mill Fabrication Work 22 , Mill Fabrication Work 23 , Mill Fabrication Work 24 , Mill Fabrication Work 25 , Mill Fabrication Work 26 , Mill Fabrication Work 27 , Mill Fabrication Work 28 , Mill Fabrication Work 29 , Mill Fabrication Work 30 , Mill Fabrication Work 31 , Mill Fabrication Work 32 , Mill Fabrication Work 33 , Mill Fabrication Work 34 , Mill Fabrication Work 35 , Mill Fabrication Work 36 , Mill Fabrication Work 37 , Mill Fabrication Work 38 , Mill Fabrication Work 39 , Mill Fabrication Work 40 , Mill Fabrication Work 41 , Mill Fabrication Work 42, Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (8inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (6inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (4inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (3inch)., Fabricate And Installation Bends At Various Locations In The Mill House (6inch)., Fabricate And Installation Bends At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (10inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (8inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (6inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (8inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (6inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (1inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (8inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (6inch)., Replace The Damaged Side Plates And Bottom Plates Of The Cane Carrier, Leveler, Chopper, Secondary Rake Carrier, And Rake Carrier With The Supplied Plates (6/8/10 Mm Thick Plates)., Cut And Remove The Old Runners Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Runners., Remove The Corroded Angles, Beams, And Channels Beneath The Runners Of The Cane Carrier Supporting Angle, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Cut And Remove The Old Trough Of The Inter Rake Carrier And Secondary Rake Carrier Installed In The Mill House, Fabricate And Installation A New Trough Using The Supplied 8/10 Mm Plate As Per Instructions, And Conduct A Satisfactory Trial., Cut, Remove, Reinstall The Mill Hole Trough., Cut And Remove The Tray Beneath The Mill Trpf, Fabricate And Installation A New Tray Using The Supplied 10/12 Mm Thick Plate, And Conduct A Satisfactory Trial., Fabricate New Juice Rings For The Mill Rollers Using 6/8 Mm Thick Plate As Per The Sample., Dismantle The Damaged Side Plate Of The Fibrizer, Place It In The Scrap Yard, Fabricate And Installation New Side Plates Using The Supplied 8/10 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Cut And Remove The Worn Bed Of The Tail Shaft Of The Secondary Rake Carrier And Fabricate And Installation A New One Using A Supplied 200 Mm Beam., Fabricate And Installation A New Guard For The Mill Crown Pinion And Place The Old Damaged Guard In The Scrap Yard., Remove The Damaged Angles Of The Side Plates Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Remove The Damaged Juice Tray Of The Trpf Rollers Installed On The Mill Head Stocks, Place It In The Scrap Yard, Fabricate A New Tray From The Supplied 8/10 Mm Plate, And Installation It In Its Original Position., Remove The 12inch Size Header Installed On The Mill Screen Juice Line, Fabricate A New Header As Per The Sample, Complete All Connections As Before, And Conduct A Satisfactory Trial., Fabricate A New Delivery Header For The Screen Juice Tank (10inch Size, 2.1 M Length) Along With 8 And 10 Nipples, Fabricate And Erect It As Per The Sample, And Conduct A Satisfactory Trial., Cut The Damaged Top Cover Of The Mill Trpf, Cut The Supplied 8/10 Mm Plate, Fabricate It As Per The Sample, Installation It In Its Original Position Using The Supplied 8/10 Mm Plate., Dismantle The Trpf Bottom Cover Of Mill No. 2, Place It In The Scrap Yard, Fabricate A New Cover From The Supplied 8/10 Mm Plate, Installation It In Position, And Conduct A Trial., Dismantle The Weak And Damaged Plates On Both Sides And The Back Of The Chute Of Mill No. 2 Trpf Installed In The Mill House, Place Them In The Scrap Yard, Fabricate And Installation New Plates Using The Supplied 10/12 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Remove The Old And Damaged Rail Of The Crane Unloader Trolley, Installation The Supplied New Rail (40 X 40 Mm), Strengthen It, And Conduct A Trial., Fabricate And Installation New Covers For The Mill Bearing Housing., Fabricate And Installation The Juice Distribution Tray In The Pipeline Of The Mill Juice Pumps., Carry Out Welding Of The Mill Trpf Rollers And Repair By Installing And Welding The Cut Side Plate., Repair The Racks Of The Secondary And Inter Rake Carriers., Weld The Cut Tail Bar Of The Mill And Fabricate It To The Required Size., Carry Out Pineapple Chevron Grooving And Cutting Work On The Mill Rollers., Carry Out On-site Forging Of The Side Links Of The Cane Carrier, Bagasse Carrier, Elevator, And Rbc Chain, And Fit Pins And Bushes As Required To Achieve The Specified Size. in Uttar Pradesh.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For Mill Fabrication Work 1 , Mill Fabrication Work 2 , Mill Fabrication Work 3 , Mill Fabrication Work 4 , Mill Fabrication Work 5 , Mill Fabrication Work 6 , Mill Fabrication Work 7 , Mill Fabrication Work 8 , Mill Fabrication Work 9 , Mill Fabrication Work 10 , Mill Fabrication Work 11 , Mill Fabrication Work 12 , Mill Fabrication Work 13 , Mill Fabrication Work 14 , Mill Fabrication Work 15 , Mill Fabrication Work 16 , Mill Fabrication Work 17 , Mill Fabrication Work 18 , Mill Fabrication Work 19 , Mill Fabrication Work 20 , Mill Fabrication Work 21 , Mill Fabrication Work 22 , Mill Fabrication Work 23 , Mill Fabrication Work 24 , Mill Fabrication Work 25 , Mill Fabrication Work 26 , Mill Fabrication Work 27 , Mill Fabrication Work 28 , Mill Fabrication Work 29 , Mill Fabrication Work 30 , Mill Fabrication Work 31 , Mill Fabrication Work 32 , Mill Fabrication Work 33 , Mill Fabrication Work 34 , Mill Fabrication Work 35 , Mill Fabrication Work 36 , Mill Fabrication Work 37 , Mill Fabrication Work 38 , Mill Fabrication Work 39 , Mill Fabrication Work 40 , Mill Fabrication Work 41 , Mill Fabrication Work 42, Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (8inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (6inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (4inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (3inch)., Fabricate And Installation Bends At Various Locations In The Mill House (6inch)., Fabricate And Installation Bends At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (10inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (8inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (6inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (8inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (6inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (1inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (8inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (6inch)., Replace The Damaged Side Plates And Bottom Plates Of The Cane Carrier, Leveler, Chopper, Secondary Rake Carrier, And Rake Carrier With The Supplied Plates (6/8/10 Mm Thick Plates)., Cut And Remove The Old Runners Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Runners., Remove The Corroded Angles, Beams, And Channels Beneath The Runners Of The Cane Carrier Supporting Angle, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Cut And Remove The Old Trough Of The Inter Rake Carrier And Secondary Rake Carrier Installed In The Mill House, Fabricate And Installation A New Trough Using The Supplied 8/10 Mm Plate As Per Instructions, And Conduct A Satisfactory Trial., Cut, Remove, Reinstall The Mill Hole Trough., Cut And Remove The Tray Beneath The Mill Trpf, Fabricate And Installation A New Tray Using The Supplied 10/12 Mm Thick Plate, And Conduct A Satisfactory Trial., Fabricate New Juice Rings For The Mill Rollers Using 6/8 Mm Thick Plate As Per The Sample., Dismantle The Damaged Side Plate Of The Fibrizer, Place It In The Scrap Yard, Fabricate And Installation New Side Plates Using The Supplied 8/10 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Cut And Remove The Worn Bed Of The Tail Shaft Of The Secondary Rake Carrier And Fabricate And Installation A New One Using A Supplied 200 Mm Beam., Fabricate And Installation A New Guard For The Mill Crown Pinion And Place The Old Damaged Guard In The Scrap Yard., Remove The Damaged Angles Of The Side Plates Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Remove The Damaged Juice Tray Of The Trpf Rollers Installed On The Mill Head Stocks, Place It In The Scrap Yard, Fabricate A New Tray From The Supplied 8/10 Mm Plate, And Installation It In Its Original Position., Remove The 12inch Size Header Installed On The Mill Screen Juice Line, Fabricate A New Header As Per The Sample, Complete All Connections As Before, And Conduct A Satisfactory Trial., Fabricate A New Delivery Header For The Screen Juice Tank (10inch Size, 2.1 M Length) Along With 8 And 10 Nipples, Fabricate And Erect It As Per The Sample, And Conduct A Satisfactory Trial., Cut The Damaged Top Cover Of The Mill Trpf, Cut The Supplied 8/10 Mm Plate, Fabricate It As Per The Sample, Installation It In Its Original Position Using The Supplied 8/10 Mm Plate., Dismantle The Trpf Bottom Cover Of Mill No. 2, Place It In The Scrap Yard, Fabricate A New Cover From The Supplied 8/10 Mm Plate, Installation It In Position, And Conduct A Trial., Dismantle The Weak And Damaged Plates On Both Sides And The Back Of The Chute Of Mill No. 2 Trpf Installed In The Mill House, Place Them In The Scrap Yard, Fabricate And Installation New Plates Using The Supplied 10/12 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Remove The Old And Damaged Rail Of The Crane Unloader Trolley, Installation The Supplied New Rail (40 X 40 Mm), Strengthen It, And Conduct A Trial., Fabricate And Installation New Covers For The Mill Bearing Housing., Fabricate And Installation The Juice Distribution Tray In The Pipeline Of The Mill Juice Pumps., Carry Out Welding Of The Mill Trpf Rollers And Repair By Installing And Welding The Cut Side Plate., Repair The Racks Of The Secondary And Inter Rake Carriers., Weld The Cut Tail Bar Of The Mill And Fabricate It To The Required Size., Carry Out Pineapple Chevron Grooving And Cutting Work On The Mill Rollers., Carry Out On-site Forging Of The Side Links Of The Cane Carrier, Bagasse Carrier, Elevator, And Rbc Chain, And Fit Pins And Bushes As Required To Achieve The Specified Size.. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Najibabad.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply fabrication work,bearing housing,plate repair,side plate,bearing items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Uttar Pradesh Cooperative Sugar Factories Federation Ltd UPCSFFL

To register an eligible bid for these fabrication work,bearing housing,plate repair,side plate,bearing contracts, companies must prepare their core compliance documents. Vendors operating across Uttar Pradesh must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality fabrication work,bearing housing,plate repair,side plate,bearing solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Najibabad region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For Mill Fabrication Work 1 , Mill Fabrication Work 2 , Mill Fabrication Work 3 , Mill Fabrication Work 4 , Mill Fabrication Work 5 , Mill Fabrication Work 6 , Mill Fabrication Work 7 , Mill Fabrication Work 8 , Mill Fabrication Work 9 , Mill Fabrication Work 10 , Mill Fabrication Work 11 , Mill Fabrication Work 12 , Mill Fabrication Work 13 , Mill Fabrication Work 14 , Mill Fabrication Work 15 , Mill Fabrication Work 16 , Mill Fabrication Work 17 , Mill Fabrication Work 18 , Mill Fabrication Work 19 , Mill Fabrication Work 20 , Mill Fabrication Work 21 , Mill Fabrication Work 22 , Mill Fabrication Work 23 , Mill Fabrication Work 24 , Mill Fabrication Work 25 , Mill Fabrication Work 26 , Mill Fabrication Work 27 , Mill Fabrication Work 28 , Mill Fabrication Work 29 , Mill Fabrication Work 30 , Mill Fabrication Work 31 , Mill Fabrication Work 32 , Mill Fabrication Work 33 , Mill Fabrication Work 34 , Mill Fabrication Work 35 , Mill Fabrication Work 36 , Mill Fabrication Work 37 , Mill Fabrication Work 38 , Mill Fabrication Work 39 , Mill Fabrication Work 40 , Mill Fabrication Work 41 , Mill Fabrication Work 42, Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (8inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (6inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (4inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (3inch)., Fabricate And Installation Bends At Various Locations In The Mill House (6inch)., Fabricate And Installation Bends At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (10inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (8inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (6inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (8inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (6inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (1inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (8inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (6inch)., Replace The Damaged Side Plates And Bottom Plates Of The Cane Carrier, Leveler, Chopper, Secondary Rake Carrier, And Rake Carrier With The Supplied Plates (6/8/10 Mm Thick Plates)., Cut And Remove The Old Runners Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Runners., Remove The Corroded Angles, Beams, And Channels Beneath The Runners Of The Cane Carrier Supporting Angle, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Cut And Remove The Old Trough Of The Inter Rake Carrier And Secondary Rake Carrier Installed In The Mill House, Fabricate And Installation A New Trough Using The Supplied 8/10 Mm Plate As Per Instructions, And Conduct A Satisfactory Trial., Cut, Remove, Reinstall The Mill Hole Trough., Cut And Remove The Tray Beneath The Mill Trpf, Fabricate And Installation A New Tray Using The Supplied 10/12 Mm Thick Plate, And Conduct A Satisfactory Trial., Fabricate New Juice Rings For The Mill Rollers Using 6/8 Mm Thick Plate As Per The Sample., Dismantle The Damaged Side Plate Of The Fibrizer, Place It In The Scrap Yard, Fabricate And Installation New Side Plates Using The Supplied 8/10 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Cut And Remove The Worn Bed Of The Tail Shaft Of The Secondary Rake Carrier And Fabricate And Installation A New One Using A Supplied 200 Mm Beam., Fabricate And Installation A New Guard For The Mill Crown Pinion And Place The Old Damaged Guard In The Scrap Yard., Remove The Damaged Angles Of The Side Plates Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Remove The Damaged Juice Tray Of The Trpf Rollers Installed On The Mill Head Stocks, Place It In The Scrap Yard, Fabricate A New Tray From The Supplied 8/10 Mm Plate, And Installation It In Its Original Position., Remove The 12inch Size Header Installed On The Mill Screen Juice Line, Fabricate A New Header As Per The Sample, Complete All Connections As Before, And Conduct A Satisfactory Trial., Fabricate A New Delivery Header For The Screen Juice Tank (10inch Size, 2.1 M Length) Along With 8 And 10 Nipples, Fabricate And Erect It As Per The Sample, And Conduct A Satisfactory Trial., Cut The Damaged Top Cover Of The Mill Trpf, Cut The Supplied 8/10 Mm Plate, Fabricate It As Per The Sample, Installation It In Its Original Position Using The Supplied 8/10 Mm Plate., Dismantle The Trpf Bottom Cover Of Mill No. 2, Place It In The Scrap Yard, Fabricate A New Cover From The Supplied 8/10 Mm Plate, Installation It In Position, And Conduct A Trial., Dismantle The Weak And Damaged Plates On Both Sides And The Back Of The Chute Of Mill No. 2 Trpf Installed In The Mill House, Place Them In The Scrap Yard, Fabricate And Installation New Plates Using The Supplied 10/12 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Remove The Old And Damaged Rail Of The Crane Unloader Trolley, Installation The Supplied New Rail (40 X 40 Mm), Strengthen It, And Conduct A Trial., Fabricate And Installation New Covers For The Mill Bearing Housing., Fabricate And Installation The Juice Distribution Tray In The Pipeline Of The Mill Juice Pumps., Carry Out Welding Of The Mill Trpf Rollers And Repair By Installing And Welding The Cut Side Plate., Repair The Racks Of The Secondary And Inter Rake Carriers., Weld The Cut Tail Bar Of The Mill And Fabricate It To The Required Size., Carry Out Pineapple Chevron Grooving And Cutting Work On The Mill Rollers., Carry Out On-site Forging Of The Side Links Of The Cane Carrier, Bagasse Carrier, Elevator, And Rbc Chain, And Fit Pins And Bushes As Required To Achieve The Specified Size. by Uttar Pradesh Cooperative Sugar Factories Federation Ltd UPCSFFL

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For Mill Fabrication Work 1 , Mill Fabrication Work 2 , Mill Fabrication Work 3 , Mill Fabrication Work 4 , Mill Fabrication Work 5 , Mill Fabrication Work 6 , Mill Fabrication Work 7 , Mill Fabrication Work 8 , Mill Fabrication Work 9 , Mill Fabrication Work 10 , Mill Fabrication Work 11 , Mill Fabrication Work 12 , Mill Fabrication Work 13 , Mill Fabrication Work 14 , Mill Fabrication Work 15 , Mill Fabrication Work 16 , Mill Fabrication Work 17 , Mill Fabrication Work 18 , Mill Fabrication Work 19 , Mill Fabrication Work 20 , Mill Fabrication Work 21 , Mill Fabrication Work 22 , Mill Fabrication Work 23 , Mill Fabrication Work 24 , Mill Fabrication Work 25 , Mill Fabrication Work 26 , Mill Fabrication Work 27 , Mill Fabrication Work 28 , Mill Fabrication Work 29 , Mill Fabrication Work 30 , Mill Fabrication Work 31 , Mill Fabrication Work 32 , Mill Fabrication Work 33 , Mill Fabrication Work 34 , Mill Fabrication Work 35 , Mill Fabrication Work 36 , Mill Fabrication Work 37 , Mill Fabrication Work 38 , Mill Fabrication Work 39 , Mill Fabrication Work 40 , Mill Fabrication Work 41 , Mill Fabrication Work 42, Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (8inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (6inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (4inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (3inch)., Fabricate And Installation Bends At Various Locations In The Mill House (6inch)., Fabricate And Installation Bends At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (10inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (8inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (6inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (8inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (6inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (1inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (8inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (6inch)., Replace The Damaged Side Plates And Bottom Plates Of The Cane Carrier, Leveler, Chopper, Secondary Rake Carrier, And Rake Carrier With The Supplied Plates (6/8/10 Mm Thick Plates)., Cut And Remove The Old Runners Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Runners., Remove The Corroded Angles, Beams, And Channels Beneath The Runners Of The Cane Carrier Supporting Angle, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Cut And Remove The Old Trough Of The Inter Rake Carrier And Secondary Rake Carrier Installed In The Mill House, Fabricate And Installation A New Trough Using The Supplied 8/10 Mm Plate As Per Instructions, And Conduct A Satisfactory Trial., Cut, Remove, Reinstall The Mill Hole Trough., Cut And Remove The Tray Beneath The Mill Trpf, Fabricate And Installation A New Tray Using The Supplied 10/12 Mm Thick Plate, And Conduct A Satisfactory Trial., Fabricate New Juice Rings For The Mill Rollers Using 6/8 Mm Thick Plate As Per The Sample., Dismantle The Damaged Side Plate Of The Fibrizer, Place It In The Scrap Yard, Fabricate And Installation New Side Plates Using The Supplied 8/10 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Cut And Remove The Worn Bed Of The Tail Shaft Of The Secondary Rake Carrier And Fabricate And Installation A New One Using A Supplied 200 Mm Beam., Fabricate And Installation A New Guard For The Mill Crown Pinion And Place The Old Damaged Guard In The Scrap Yard., Remove The Damaged Angles Of The Side Plates Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Remove The Damaged Juice Tray Of The Trpf Rollers Installed On The Mill Head Stocks, Place It In The Scrap Yard, Fabricate A New Tray From The Supplied 8/10 Mm Plate, And Installation It In Its Original Position., Remove The 12inch Size Header Installed On The Mill Screen Juice Line, Fabricate A New Header As Per The Sample, Complete All Connections As Before, And Conduct A Satisfactory Trial., Fabricate A New Delivery Header For The Screen Juice Tank (10inch Size, 2.1 M Length) Along With 8 And 10 Nipples, Fabricate And Erect It As Per The Sample, And Conduct A Satisfactory Trial., Cut The Damaged Top Cover Of The Mill Trpf, Cut The Supplied 8/10 Mm Plate, Fabricate It As Per The Sample, Installation It In Its Original Position Using The Supplied 8/10 Mm Plate., Dismantle The Trpf Bottom Cover Of Mill No. 2, Place It In The Scrap Yard, Fabricate A New Cover From The Supplied 8/10 Mm Plate, Installation It In Position, And Conduct A Trial., Dismantle The Weak And Damaged Plates On Both Sides And The Back Of The Chute Of Mill No. 2 Trpf Installed In The Mill House, Place Them In The Scrap Yard, Fabricate And Installation New Plates Using The Supplied 10/12 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Remove The Old And Damaged Rail Of The Crane Unloader Trolley, Installation The Supplied New Rail (40 X 40 Mm), Strengthen It, And Conduct A Trial., Fabricate And Installation New Covers For The Mill Bearing Housing., Fabricate And Installation The Juice Distribution Tray In The Pipeline Of The Mill Juice Pumps., Carry Out Welding Of The Mill Trpf Rollers And Repair By Installing And Welding The Cut Side Plate., Repair The Racks Of The Secondary And Inter Rake Carriers., Weld The Cut Tail Bar Of The Mill And Fabricate It To The Required Size., Carry Out Pineapple Chevron Grooving And Cutting Work On The Mill Rollers., Carry Out On-site Forging Of The Side Links Of The Cane Carrier, Bagasse Carrier, Elevator, And Rbc Chain, And Fit Pins And Bushes As Required To Achieve The Specified Size. within the Uttar Pradesh jurisdiction

The official timeline and deadline details for Tender For Mill Fabrication Work 1 , Mill Fabrication Work 2 , Mill Fabrication Work 3 , Mill Fabrication Work 4 , Mill Fabrication Work 5 , Mill Fabrication Work 6 , Mill Fabrication Work 7 , Mill Fabrication Work 8 , Mill Fabrication Work 9 , Mill Fabrication Work 10 , Mill Fabrication Work 11 , Mill Fabrication Work 12 , Mill Fabrication Work 13 , Mill Fabrication Work 14 , Mill Fabrication Work 15 , Mill Fabrication Work 16 , Mill Fabrication Work 17 , Mill Fabrication Work 18 , Mill Fabrication Work 19 , Mill Fabrication Work 20 , Mill Fabrication Work 21 , Mill Fabrication Work 22 , Mill Fabrication Work 23 , Mill Fabrication Work 24 , Mill Fabrication Work 25 , Mill Fabrication Work 26 , Mill Fabrication Work 27 , Mill Fabrication Work 28 , Mill Fabrication Work 29 , Mill Fabrication Work 30 , Mill Fabrication Work 31 , Mill Fabrication Work 32 , Mill Fabrication Work 33 , Mill Fabrication Work 34 , Mill Fabrication Work 35 , Mill Fabrication Work 36 , Mill Fabrication Work 37 , Mill Fabrication Work 38 , Mill Fabrication Work 39 , Mill Fabrication Work 40 , Mill Fabrication Work 41 , Mill Fabrication Work 42, Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (8inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (6inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (4inch)., Dismantle The Damaged Pipeline At Various Locations In The Mill House, Place It In The Scrap Yard, And Installation A New Pipeline (3inch)., Fabricate And Installation Bends At Various Locations In The Mill House (6inch)., Fabricate And Installation Bends At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (10inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (8inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (6inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (4inch)., Fabricate And Installation Flanges At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (8inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (6inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (3inch)., Fabricate And Installation Nipples At Various Locations In The Mill House (1inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (8inch)., Fabricate And Installation Reducers At Various Locations In The Mill House (6inch)., Replace The Damaged Side Plates And Bottom Plates Of The Cane Carrier, Leveler, Chopper, Secondary Rake Carrier, And Rake Carrier With The Supplied Plates (6/8/10 Mm Thick Plates)., Cut And Remove The Old Runners Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Runners., Remove The Corroded Angles, Beams, And Channels Beneath The Runners Of The Cane Carrier Supporting Angle, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Cut And Remove The Old Trough Of The Inter Rake Carrier And Secondary Rake Carrier Installed In The Mill House, Fabricate And Installation A New Trough Using The Supplied 8/10 Mm Plate As Per Instructions, And Conduct A Satisfactory Trial., Cut, Remove, Reinstall The Mill Hole Trough., Cut And Remove The Tray Beneath The Mill Trpf, Fabricate And Installation A New Tray Using The Supplied 10/12 Mm Thick Plate, And Conduct A Satisfactory Trial., Fabricate New Juice Rings For The Mill Rollers Using 6/8 Mm Thick Plate As Per The Sample., Dismantle The Damaged Side Plate Of The Fibrizer, Place It In The Scrap Yard, Fabricate And Installation New Side Plates Using The Supplied 8/10 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Cut And Remove The Worn Bed Of The Tail Shaft Of The Secondary Rake Carrier And Fabricate And Installation A New One Using A Supplied 200 Mm Beam., Fabricate And Installation A New Guard For The Mill Crown Pinion And Place The Old Damaged Guard In The Scrap Yard., Remove The Damaged Angles Of The Side Plates Of The Cane Carrier, Secondary Rake Carrier, And Inter Rake Carrier, And Installation New Angles In Their Place., Remove The Damaged Juice Tray Of The Trpf Rollers Installed On The Mill Head Stocks, Place It In The Scrap Yard, Fabricate A New Tray From The Supplied 8/10 Mm Plate, And Installation It In Its Original Position., Remove The 12inch Size Header Installed On The Mill Screen Juice Line, Fabricate A New Header As Per The Sample, Complete All Connections As Before, And Conduct A Satisfactory Trial., Fabricate A New Delivery Header For The Screen Juice Tank (10inch Size, 2.1 M Length) Along With 8 And 10 Nipples, Fabricate And Erect It As Per The Sample, And Conduct A Satisfactory Trial., Cut The Damaged Top Cover Of The Mill Trpf, Cut The Supplied 8/10 Mm Plate, Fabricate It As Per The Sample, Installation It In Its Original Position Using The Supplied 8/10 Mm Plate., Dismantle The Trpf Bottom Cover Of Mill No. 2, Place It In The Scrap Yard, Fabricate A New Cover From The Supplied 8/10 Mm Plate, Installation It In Position, And Conduct A Trial., Dismantle The Weak And Damaged Plates On Both Sides And The Back Of The Chute Of Mill No. 2 Trpf Installed In The Mill House, Place Them In The Scrap Yard, Fabricate And Installation New Plates Using The Supplied 10/12 Mm Thick Plate As Before, And Conduct A Satisfactory Trial., Remove The Old And Damaged Rail Of The Crane Unloader Trolley, Installation The Supplied New Rail (40 X 40 Mm), Strengthen It, And Conduct A Trial., Fabricate And Installation New Covers For The Mill Bearing Housing., Fabricate And Installation The Juice Distribution Tray In The Pipeline Of The Mill Juice Pumps., Carry Out Welding Of The Mill Trpf Rollers And Repair By Installing And Welding The Cut Side Plate., Repair The Racks Of The Secondary And Inter Rake Carriers., Weld The Cut Tail Bar Of The Mill And Fabricate It To The Required Size., Carry Out Pineapple Chevron Grooving And Cutting Work On The Mill Rollers., Carry Out On-site Forging Of The Side Links Of The Cane Carrier, Bagasse Carrier, Elevator, And Rbc Chain, And Fit Pins And Bushes As Required To Achieve The Specified Size. are available inside the detailed notification files. Bidders planning to target this contract in Najibabad should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.