tender for 9911837443 bolster for press tool size 1500 l x 800w x 100mm t , 9911839677 bolster for press tool size 1000 l x 200w x 75 mm t , 9911839678 bolster for press ttool size 1200 l x 700 w x 100mm t , 9911837447 bolster for press tool size 800 l z 800 w x 100 mm t , 9911839351 bolster for pres tool size 1500 l x 1000 w x 100mm t , 9911839352 bolster for press tool size 1200 l x 1000 w x 100mm t , 9911839675 bolster for press toll size 400 l x400w x 75mm t , 9911837438 bolster for pres tool size 400 l x 350 w x 50 mm t , 9911837448 bolster for press tool size 1200l x 600 w x 100 mm t , 9911839114 bolster for press tool size 1000 l x 800 w x 100 mm t, bolster for press tool, bolster for press tool size 1500 l x 800w x 100mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defects edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press tool size 1000 l x 200w x 75 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press tool size 1200 l x 700 w x 100mm t tolerance +-2mm, material grey cast iron to spec is 210 of 1993 grade fg-200, the casting shall be sound, clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other ,any welding / repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press tool size 800 l z 800 w x 100 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tear, cold shuts distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for pres tool size 1500 l x 1000 w x 100mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press tool size 1200 l x 1000 w x 100mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press toll size 400 l x400w x 75mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for pres tool size 400 l x 350 w x 50 mm t tolerance +-2mm, material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press tool size 1200l x 600 w x 100 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled., bolster for press tool size 1000 l x 800 w x 100 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled.

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding press tool,cast iron parameters and guide you on how to coordinate efficiently with the procurement team of Yantra India Limited

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For 9911837443 Bolster For Press Tool Size 1500 L X 800w X 100mm T , 9911839677 Bolster For Press Tool Size 1000 L X 200w X 75 Mm T , 9911839678 Bolster For Press Ttool Size 1200 L X 700 W X 100mm T , 9911837447 Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T , 9911839351 Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T , 9911839352 Bolster For Press Tool Size 1200 L X 1000 W X 100mm T , 9911839675 Bolster For Press Toll Size 400 L X400w X 75mm T , 9911837438 Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T , 9911837448 Bolster For Press Tool Size 1200l X 600 W X 100 Mm T , 9911839114 Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T, Bolster For Press Tool, Bolster For Press Tool Size 1500 L X 800w X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defects Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 200w X 75 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out. Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 700 W X 100mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200, The Casting Shall Be Sound, Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other ,any Welding / Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tear, Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Toll Size 400 L X400w X 75mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200l X 600 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled. . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Yantra India Limited.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For 9911837443 Bolster For Press Tool Size 1500 L X 800w X 100mm T , 9911839677 Bolster For Press Tool Size 1000 L X 200w X 75 Mm T , 9911839678 Bolster For Press Ttool Size 1200 L X 700 W X 100mm T , 9911837447 Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T , 9911839351 Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T , 9911839352 Bolster For Press Tool Size 1200 L X 1000 W X 100mm T , 9911839675 Bolster For Press Toll Size 400 L X400w X 75mm T , 9911837438 Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T , 9911837448 Bolster For Press Tool Size 1200l X 600 W X 100 Mm T , 9911839114 Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T, Bolster For Press Tool, Bolster For Press Tool Size 1500 L X 800w X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defects Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 200w X 75 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out. Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 700 W X 100mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200, The Casting Shall Be Sound, Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other ,any Welding / Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tear, Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Toll Size 400 L X400w X 75mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200l X 600 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled. in Maharashtra.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For 9911837443 Bolster For Press Tool Size 1500 L X 800w X 100mm T , 9911839677 Bolster For Press Tool Size 1000 L X 200w X 75 Mm T , 9911839678 Bolster For Press Ttool Size 1200 L X 700 W X 100mm T , 9911837447 Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T , 9911839351 Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T , 9911839352 Bolster For Press Tool Size 1200 L X 1000 W X 100mm T , 9911839675 Bolster For Press Toll Size 400 L X400w X 75mm T , 9911837438 Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T , 9911837448 Bolster For Press Tool Size 1200l X 600 W X 100 Mm T , 9911839114 Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T, Bolster For Press Tool, Bolster For Press Tool Size 1500 L X 800w X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defects Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 200w X 75 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out. Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 700 W X 100mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200, The Casting Shall Be Sound, Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other ,any Welding / Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tear, Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Toll Size 400 L X400w X 75mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200l X 600 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled.. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Jalgaon.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply press tool,cast iron items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Yantra India Limited

To register an eligible bid for these press tool,cast iron contracts, companies must prepare their core compliance documents. Vendors operating across Maharashtra must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality press tool,cast iron solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Jalgaon region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For 9911837443 Bolster For Press Tool Size 1500 L X 800w X 100mm T , 9911839677 Bolster For Press Tool Size 1000 L X 200w X 75 Mm T , 9911839678 Bolster For Press Ttool Size 1200 L X 700 W X 100mm T , 9911837447 Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T , 9911839351 Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T , 9911839352 Bolster For Press Tool Size 1200 L X 1000 W X 100mm T , 9911839675 Bolster For Press Toll Size 400 L X400w X 75mm T , 9911837438 Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T , 9911837448 Bolster For Press Tool Size 1200l X 600 W X 100 Mm T , 9911839114 Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T, Bolster For Press Tool, Bolster For Press Tool Size 1500 L X 800w X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defects Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 200w X 75 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out. Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 700 W X 100mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200, The Casting Shall Be Sound, Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other ,any Welding / Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tear, Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Toll Size 400 L X400w X 75mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200l X 600 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled. by Yantra India Limited

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For 9911837443 Bolster For Press Tool Size 1500 L X 800w X 100mm T , 9911839677 Bolster For Press Tool Size 1000 L X 200w X 75 Mm T , 9911839678 Bolster For Press Ttool Size 1200 L X 700 W X 100mm T , 9911837447 Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T , 9911839351 Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T , 9911839352 Bolster For Press Tool Size 1200 L X 1000 W X 100mm T , 9911839675 Bolster For Press Toll Size 400 L X400w X 75mm T , 9911837438 Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T , 9911837448 Bolster For Press Tool Size 1200l X 600 W X 100 Mm T , 9911839114 Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T, Bolster For Press Tool, Bolster For Press Tool Size 1500 L X 800w X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defects Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 200w X 75 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out. Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 700 W X 100mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200, The Casting Shall Be Sound, Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other ,any Welding / Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tear, Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Toll Size 400 L X400w X 75mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200l X 600 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled. within the Maharashtra jurisdiction

The official timeline and deadline details for Tender For 9911837443 Bolster For Press Tool Size 1500 L X 800w X 100mm T , 9911839677 Bolster For Press Tool Size 1000 L X 200w X 75 Mm T , 9911839678 Bolster For Press Ttool Size 1200 L X 700 W X 100mm T , 9911837447 Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T , 9911839351 Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T , 9911839352 Bolster For Press Tool Size 1200 L X 1000 W X 100mm T , 9911839675 Bolster For Press Toll Size 400 L X400w X 75mm T , 9911837438 Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T , 9911837448 Bolster For Press Tool Size 1200l X 600 W X 100 Mm T , 9911839114 Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T, Bolster For Press Tool, Bolster For Press Tool Size 1500 L X 800w X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defects Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 200w X 75 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out. Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 700 W X 100mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200, The Casting Shall Be Sound, Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other ,any Welding / Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 800 L Z 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tear, Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 1500 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortions Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200 L X 1000 W X 100mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Toll Size 400 L X400w X 75mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Pres Tool Size 400 L X 350 W X 50 Mm T Tolerance +-2mm, Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1200l X 600 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled., Bolster For Press Tool Size 1000 L X 800 W X 100 Mm T Tolerance +-2mm Material Grey Cast Iron To Spec Is 210 Of 1993 Grade Fg-200 The Casting Shall Be Sound Clean And Free From Porosity Blow Holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand And Slag Inclusions And Other Harmful Defect Edges Of Casting Should Be Right Angle To Each Other Any Welding And Or Repairing Should Not Have Been Carried Out . Supplier Must Submit Test Report Of Material For Physical And Chemical Properties From Approved Nabl Lab With Ultrasonic Test. Bolster Shall Be Well Dressed And Fettled. are available inside the detailed notification files. Bidders planning to target this contract in Jalgaon should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.