sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

26Latest Winding strip Tenders List

Latest Winding strip Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Winding strip tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Winding strip tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Winding strip Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Winding strip tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Winding strip Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Winding strip Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Winding strip Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Winding strip tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Winding strip Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Winding strip sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Winding strip tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Winding strip tenders.

Is EMD mandatory for all Winding strip tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Winding strip work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Winding strip tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Winding strip Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17663544
Location : varanasi , uttar pradesh
Source : GEM Tenders
NEW TENDER
tender for dpc aluminium winding strip
Agency / Dept :
purvanchal vidyut vitaran nigam limited PUVVNL
Due Date :
Oct 22, 2026 (14 days left)
Tender Value :
7.43Cr
View Documents
T18 Ref No : 17658707
Location : varanasi , uttar pradesh
Source : GEM Tenders
NEW TENDER
tender for dpc aluminium winding strip
Agency / Dept :
purvanchal vidyut vitaran nigam limited PUVVNL
Due Date :
Oct 22, 2026 (14 days left)
Tender Value :
7.43Cr
View Documents
T18 Ref No : 17494772
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment and machinery - bearing puller set , cut out relays , brake test arrangement , bus bar with brackets 1 mtr , rcc pole , energy meter 3 ph440v , wheatstone bridge complete with galvanometer and battery , variable auto transformer , ac starter resistance type starter , star delta strater soft starter , auto transformer type starter , function generator , discrete component trainer , motor ac single phase 230 v series type , single phase capacitor motor , coil winding machine manual , shaded pole motor fractional hp, 240 v, 50 hz , wiring board on stand , anvil with stand , circlip pliers expanding and contracting 150 mm , circlip pliers expanding and contracting 200 mm , different type of engine bearing model , different type of piston model , engineers stethoscope , growler , injector multi hole type , injector pintle type , left cut snips , piston ring expander and remover. , radiator pressure cap , right cut snips , rivet sets snap and dolly combined , scraper flat , spanner t. flocks for screwing up and upscrewing inaccessible , water pump for dismantling and assembling , pneumatic rivet gun with accessories , plumb bob 115 grams , wheatstones bridge , solid state solar based single phase energy meter , rawl punch holder and bits , a. cut out relay , b. reverse current relay , c. over current relay , d. under voltage relay , knife switch tpdt fitted with fuse terminals , earth electrode primary electrode 2100x28x3.25 mm secondary cu strip 20x5mm , capacitors electrolytic , capacitors ceramic , capacitors polyster film , capacitors variable , capacitors dual run , bus bar with brackets 1 mtr each , solar street light lamp 12v 18 or 24 watts , d.c. shunt motor , dmx controller , caliper hermachrodite.spring type 150 mm , file flat 2nd cut safe edge 300 mm , lapping plate , jigs and fixture sample for demonstration , drift drill 200 mm, 100-300mm for extracting both outer and inner races with box containing, cut out relays, two spring balance of 0 to 25 kg, 1 mtr, with accessories 6 mtr, 3 ph 440 v 15 a 4 wire induction type, wheatstone bridge complete with galvanometer and battery, 0 - 270v 5a -10a single phase, for 3 phase 400 v 50 cycles 2 to 5 h p ac motors, for 3-phase, 400 v 50 cycles 2 to 5 hp ac motors, for 3-phase 400 v 50 cycles 2 to 5 hp ac motors auto transformer type starter, 2 to 200 khz, sine, square, triangular 220 v 50 hz single phase, for diode and transistor circuit with regulated power supply +5,0- 5 v,+12 ,0-12 v, 50 cycles series type with starter with switch 1 hp, single phase capacitor motor 1 hp 240v 50hz with starter switch, manual motor coil winding machine with step arbor, fractional hp 240 v 50 hz, 3 meters x 1meter with 0.5 meter projection on the top, 50 kgs, expanding and contracting 150 mm, expanding and contracting 200 mm, different type of engine bearing model, different type of piston model, engineers stethoscope, growler, injector multi hole type, injector pintle type, 250 mm, piston ring expander and remover., radiator pressure cap, 3 mm, 4 mm, 6mm, 250mm, spanner t. flocks for screwing up and upscrewing inaccessible, water pump for dismantling and assembling, pneumatic rivet gun with accessories, 115 grams, wheatstones bridge, bidirectional 5 to 30 amps 240 volts, (no. 8,10,14 &16) set, 16a, 440v, 360v- 440v, 16 amp/440 v, earth electrode primary electrode 2100x28x3.25 mm, secondary cu strip 20x5mm, capacitors electrolytic, capacitors ceramic, capacitors polyster film, capacitors variable, capacitors dual run, different type 1 mtr each, 12v 75ah battery 75 wp solar panel, 3 h.p 250 v with 3 point starter and speed regulator (laboratory type), dmx controller, 150 mm, 300 mm, 6 inch dia, jigs and fixture sample for demonstration, 200 mm hardened and black finish
Agency / Dept :
department of employment and training DET
Due Date :
Oct 10, 2026 (2 days left)
Tender Value :
4L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17460290
Location : dasada , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools and equipment machinery item - cut section model for pneumatic components , drill gauges letter drill gauge , power tools for fastening capacity 10-18 , hand reamer set nominal dia. 6, 8, 10, 12, 16mm , surface roughness comparison plates n1 - n12 grade , anvil 50 kgs with stand , injector , ring groove cleaner , valve spring compressor universal , glow plug tester , drill point angle gauge , stethoscope engineering , arbor press hand operated 2 ton capacity , drill twist 1.5 mm to 15 mm by 0.5 mm , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition brake drum , working model of power showing parts like door , cut section models of shock absorbers , cut section of cross ply and radial tyres , coll winding machines with counting meter , potential transformer , single phase transformer, core type, air cooled , brake test arrangement with two spring balance rating 0-25 kg , shaded pole motor fractional hp , series type portable box type ohm meter , shunt type portable box type ohm meter , ac starter starters for 3-phase , 3 phase - smart energy meter , milli voltmeter centre zero analog, portable box type housed in bakelite case , d.c. compound motor 3 h.p. 250 v, with 4 point starter and field regulator , d.c. shunt motor 3 h.p. 250 v with 3 point starter and speed regulator , solid state solar base single phase energy meter , cut out relays , reverse current relay , under voltaged relay , soft starter single phase , magnetic flux meter 0- 500 tesla , dmx controller , rawl punch holder and bits , hot wire ammeter 0-15 amps. , voltmeter m.c. multirange , voltmeter centre zero , ammeter m.c. centre zero , kilo watt meter , watt meter dynamo meter type , foot print grip 250 mm , wall jumper octagonal , earth electrode primary electrode , earth electrode secondary cu strip , dc power supply, cut section model for pneumatic components with profile plate, anodised aluminium, drill gauges letter drill gauge (a to z), number drill gauge (1 to 60), metric drill gauge (1.5mm to 12.5mm, 30 holes), power tools for fastening capacity 10-18mm, hand reamer set (taper pin straight flute) nominal dia. 6, 8, 10, 12, 16mm, surface roughness comparison plates n1 - n12 grade, anvil 50 kgs with stand, injector (two types) multi hole type, pintle type, ring groove cleaner, valve spring compressor universal, glow plug tester, drill point angle gauge, stethoscope engineering, arbor press hand operated 2 ton capacity, drill twist 1.5 mm to 15 mm (various sizes) by 0.5 mm, disk brake in working condition with caliper assembly with all parts exhibiting brake disc, caliper assembly, tandem master cylinder, brake hoses, oil bottle, pedal, etc, drum brake assembly in working condition brake drum, tandem master cylinder, oil container, brake hose, brake pedal, working model of power showing parts like door, glass with motor and its gear arrangement and operating switch. windows, cut section models of shock absorbers, cut section of cross ply and radial tyres, coll winding machines with counting meter, potential transformer 415 v, 50 hz, pt ratio, 440v/110 v,10 va, single phase transformer, core type, air cooled1 kva , 240/415 v, 50 hz, brake test arrangement with two spring balance rating 0-25 kg, shaded pole motor fractional hp , 240 v , 50 hz, series type portable box type ohm meter 50/2000 ohm analog, shunt type portable box type ohm meter 50/2000 ohm analog, ac starter starters for 3-phase, 400 v,50 cycles, 2 to 5 h.p.a.c. motors auto transformer type starter, 3 phase - smart energy meter, milli voltmeter centre zero analog, portable box type housed in bakelite case 100-0-100 mv, d.c. compound motor 3 h.p. 250 v, with 4 point starter and field regulator(laboratory type), d.c. shunt motor 3 h.p. 250 v with 3 point starter and speed regulator (laboratory type), solid state solar base single phase energy meter (bidirectional)5-30amops,240v, cut out relaysa. 16a, 440v, reverse current relay 16a, 440v, under voltaged relay 360v-440v, soft starter single phase, magnetic flux meter 0-500 tesla, dmx controller, rawl punch holder and bits (no. 8,10), hot wire ammeter 0-15 amps., voltmeter m.c. multirange 0-70,150,300 & 600v, voltmeter m.c. multirange 0-15,30,50 & 75 v, voltmeter centre zero 15-0-15 volts, ammeter m.c. centre zero 5-0-5 amp., kilo watt (kw) meter 15 a 440 v 3 phase, watt meter dynamo meter type 5 amp.and 250 v 1.25 kw, rawl punch holder and bits (no. 8,10,14,16), foot print grip 250 mm, wall jumper octagonal 37mmx450mm and 37x600 mm, earth electrode primary electrode 2100x28x3.25mm, earth electrode secondary cu strip 20x5mm, dc power supply 250 v / 25a
Agency / Dept :
department of employment and training DET
Due Date :
Oct 16, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17460449
Location : umarpada , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment for different trade of iti - micrometer outside digital 0 to 25 mm reading 0.01 mm , mallet barwood 1 kg. 75 mm x 15 mm , earth copper plate 60cm x 60cm x 3.15 mm , pipe vice cast iron with hardened jaw open type 100mm , digital lux meter lcd read out 0.05 to 7000 lumens with battery. , pump electric 1 hp. , bus bar with brackets 1 mtr , wheatstones bridge , solid state solar base single phase energy meter , hydraulic crimping tool for ug 20sq mm to 250sq mm cable crimping with bits , geyser 10 liter 240 v storage type , multimeter 0 to 1000 m ohms 2.5 to 5000 volt , clipon clamp ammeter 0-25 amp,0-200amp , crimping tool for crimping 16 sq mm to 95 sq.mm , coil winding machine manual , d.c a.c. ammeter 0-500 ma , mixture mixer grinder 750 w, 240 v , bradawl 150 mm x 6mm square pointed , rawl punch holder and bits no. 8,10 , voltmeter m.c.0.-300 volts , voltmeter centre zero 15-0-15 volts , voltmeter m.i. multirange 0-150,300,600 v , frequency meter 45 to 55 hz , ammeter m.i. 0-5 amp.panel board type , hydrometer , twist drill bits 6,8,10,12, mm , small crimping tools assorted 10 - 100 mm 5nos set , rawl punch holder and bits no. 8,10,14,16 , scissors 200 mm , rotary switch 16 amp , over load relays , earth gi plate 60cm x 60cm x 6mm , earth electrode primary electrode 2100x28x3.25mm , earth electrode secondary cu strip 20x5mm , capacitors electrolytic ceramic polyester film variable dual run , various electronic components resistors, diode, transistor, ujt, fet, scr, diac, traic, igbt, small transformer , safety belt with provision for keeping tools , solar charge controller with manual switch day lighting 12 v 10 a , halogen incandescent lamp , lamp cfl 5 watt, 15 watt , 25 watt set , heating plates electric 1000 watts. , drill s.s. twist block 2 mm, 5 mm and 6 mm set of 3 , rubber mat , voltmeter centre zero 100-0-100 mv , tong tester 0 - 100 a multi range , phase sequence indicator 3 phase, 415 v , tempreture controlled soldering iron 50w, 230 v , techometer analog type - 10000 rpm, micrometer outside (digital) 0 to 25 mm reading 0.01 mm, mallet barwood 1 kg. (75 mm x 15 mm), earth copper plate 60cm x 60cm x 3.15 mm, pipe vice cast iron with hardened jaw open type 100mm, digital lux meter lcd read out 0.05 to 7000 lumens with battery., pump electric 1 hp., bus bar with brackets 1 mtr, wheatstones bridge, solid state solar base single phase energy meter (bidirectional)5-30amops,240v, hydraulic crimping tool for ug 20sq mm to 250sq mm cable crimping with bits, geyser 10 liter 240 v (storage type), multimeter 0 to 1000 m ohms 2.5 to 5000 volt, clipon (clamp) ammeter 0-25 amp,0-200amp, crimping tool for crimping 16 sq mm to 95 sq.mm, coil winding machine (manual)., d.c / a.c. ammeter 0-500 ma, mixture/mixer grinder 750 w, 240 v, bradawl 150 mm x 6mm square pointed, rawl punch holder and bits (no. 8,10), voltmeter m.c.0.-300 volts, voltmeter centre zero 15-0-15 volts, voltmeter m.i. multirange 0-150,300,600 v, frequency meter 45 to 55 hz, ammeter m.i. 0-5 amp.panel board type, hydrometer, twist drill bits 6,8,10,12, mm, small crimping tools (assorted) 10 - 100 mm (5nos) set, rawl punch holder and bits (no. 8,10,14,16), scissors 200 mm, rotary switch 16 amp, over load relays, earth gi plate 60cm x 60cm x 6mm, earth electrode primary electrode 2100x28x3.25mm, earth electrode secondary cu strip 20x5mm, capacitors electrolytic ceramic polyester film variable dual run, various electronic components resistors, diode, transistor, ujt, fet, scr, diac, traic, igbt, small transformer, safety belt with provision for keeping tools, solar charge controller with manual switch ( day lighting) 12 v 10 a, halogen incandescent lamp, lamp cfl 5 watt, 15 watt , 25 watt set, heating plates (electric) 1000 watts., drill s.s. twist block 2 mm, 5 mm and 6 mm set of 3, rubber mat 60 x 120 x 2.5 cm (2x4x1), voltmeter centre zero 100-0-100 mv, tong tester ( 0 - 100 a multi range ), phase sequence indicator 3 phase, 415 v, tempreture controlled soldering iron 50w, 230 v, techometer analog type - 10000 rpm
Agency / Dept :
department of employment and training DET
Due Date :
Oct 09, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17564440
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for kubernagar boq 2 - ms angle , ms angle , ms pipe dia , ms sheet , msangle , ms channel , ms hollow pipe , ms pipe , ms square bar , ms squarebar , scr testing board circuit with pcb size 120x800065 , csk screw and nut , ma mono plug , marcury chock 125 watt 250v , marcury lamp 125 watt with holder 250volt , side and face cutter , silicon carbide grinding wheel , mercury , metal condut pipe , metal detector loose kit , methanol lab grade , methyl iso butyl ketone , methyl orange indicator , micro 12v soldering and desoldering station , mirror pieces , monitor power adapter , mould realese wax , ms hinges , silver brazing flux , m seal , multimeter kit , silver brazing rod , mythyle orange , nail inch , silver nitrate , network cable tester , network switch 8 port , nikon ac adapter , nikon lithium ion battery , nipple diameter 25mm , npn transistor , nrv , single compression gland 19mm , nut boult 6 mm , nvme 512gb ssd , pvc cable gland 19mm , oil filter , oil filter maruti , oil pump gasket single , on off push button switch , ortho phospheric acid , p clip , p.v.c. foure way connector , p.v.c. pipe 25 mm , paint brush set flat and round , paraffin liquid , patch code , pendant holder , pent clip , petrol pipe , ph paper , phenol lr , phenyle , piping coard , smd componenet diode , plaster of paris , plastic board , plastic bobbin small , smd componenet , se winding wire , se cu wire 36 swg , se cu wire 29 swg , plywood sheet , pnp transistor bc 557 and 558 , poliaster capacitor 0.1 microfarade, 600v , pot 10k , pot 570 ohm , pot 5k , potassium bromate lr , potassium hydroxide , potassium parmangnate , potassium sulphate lr , pot 1 megaohm , power contactor , power strip with 5mtr cable , pressure guage 800psi with valve , s s flat 50x3 , psychrometric chart pvc sheet , ptc relay , punch down tool for rj-45 keystone jack , pvc round block , pvc t , pvc 1 way gang box , pvc 2 way gang box , pvc 3 way gang box , pvc 4 way gang box , pvc bend 19mm dia , pvc electrical board , pvc casing caping 19mm dia , pvc casing caping 25mm , pvc casing caping all corner , pvc casing caping tee , pvc cotton sleeve , pvc nitrile , pvc pipe , pvc roundblcok , pvc switch board , pvc transperent, full wave rectifier circuit kit, radiator hose pipe for stationary diesel engine with clamp, 5 a, 10e and 1w, 9mm, 38mm, 8x4x swg 22, 8 by 4 swg 24, 8 by 4 swg 28, 1/2 inch, 1/2 inch dia, 25 mm dia, dia 2 mm, gasket packing set for stationary diesel engine, rawl plug, general pupose smd pcb, geomatric set, all shape in 3d, 8 swg, red yellow and white, grinding blade, 250 mm, half wave rectifier circuit kit, 4 mm 5 mm 6 mm, handle for bench vice (metal), 12 inch x12 inch, 4 mm (8 swg), hdmi type a cable, a/f 18 mm, m6 x 16 mm, m8 x 10 mm, hookup wire, 1 inch, 12x12x150, 5/8 by 5/8 by/6, 1/4 by 1/4 by6, lr grade, ic 723, ic 7400, ic 7402, ic 7805, ic 7812, ic 7905, ic 8083, ic at89c51, ic based am receiver loose kit, ic based am transmitter loose kit, ic based fm reciver loose kit, ic based fm transmitter loose kit, ic lm317, ic lm317t, 250v, infrarede motion ditector 360 digree censor, 6 amp, ipa solution pcb cleaner 500 ml, iron powder, 4x2x45 mm, kirchoffs current law circuit with kit, kirchoffs voltage law circuit with kit, rediator cap, 16 amp, 12v 500 ma dc sugar type, 100w 250volt, 200w 250v, 40w 250volt, 6 volt, 60w 250volt, lamp holder pendent type, lan faceplate with io and gangbox, lan switch 8-port, latex nitrile hand gloves, leatheroid paper, 5mm 3w 250v, 5 mm red, dia 3.15mm, litmus paper, 12 volt, 5 volt, low voltage dc servo motor, luxor oil-based paint ink white of tip size 0.5 mm permanent paint markers, 25mm, 40 by 40 by 8 mm, 40 by 40 by 6 mm, 50x03, 50x06, 125 x 55 x 1.6 mm, 40 x 40 x 6 mm, 75 x 40 mm, mc 75 mm, dia 32 mm, dia 50x03mm, dia 50x06mm, 2mm thick 8 by 4 feet, 32 mm, 20 x 20 mm, size 120x80 layout & loose componant placement and practical procedure step by steps papers in gujarati, m3 and 40 mm, 6.35mm to 3.5mm 4 pole, 125 watt/ 250v, 125 watt with holder 250volt, 80x18x27 dia, 300x40x38 mm, mercury, 19 mm, metal detector loose kit, methanol lab grade, methyl iso butyl ketone, methyl orange indicator, 1cm by 1cm, 12v 2a 24w, mould realese wax, 5 inch, silver brazing flux, m seal, multimeter kit, silver brazing rod, mythyle orange, nail 17 by 1 inch, silver nitrate, network cable tester, network switch 8 port, eh 71p, input 100v 240v 50/60 hz output 5v 1a dc, en - el23 3.8v, 1850mah 7.1wh, 25 mm dia., npn transistor bc 547 and 548, nrv 1/4 inch, 19 mm, 6 mm, 512gb, 19mm, oil filter, oil filter maruti, oil pump gasket single, on off push button switch, ortho phospheric acid, p clip, pvc foure way connector, 25 mm, paint brush set flat and round, paraffin liquid, male 2 sided 10 inch length, pendant holder, pent clip, petrol pipe, ph paper, phenol lr, phenyle, piping coard, smd componenet diode, plaster of paris, 10 inch x 12 inch, dia-10mm length 50 mm, asoorted resistor, 23 swg, 36 swg, 29 swg, 3 x 3, pnp transistor bc 557 and 558, 0.1 microfarade, 600v, 10k, 570 ohm, 5k, 1 megaohm, 2no,2nc type 440volt, 5mtr cable, pressure guage 800psi with valve, 50x3 mm, 4 foot x 4foot, ptc relay, punch down tool for rj45 keystone jack, 2.5 inch x1 inch, 3/4 inch, pvc 1 way gang box, pvc 2 way gang box, pvc 3 way gang box, pvc 4 way gang box, 19mm dia, 10 inch x 12 inch 16m, 8 x 6, 12m, 25mm, pvc casing caping all corner, pvc casing caping tee, pvc cotton sleeve, pvc nitrile latex gloves, 6 switch and 5 socket 10x6, pvc transperent sheet, silicon grease, concave and convex
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (7 days left)
Tender Value :
2.4L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17634348
Location : jhansi , uttar pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for auto changeover switch 630a , 0803 ceiling fan 48 inch , 1200mm , 0803 wall mounting fan 1350rpm 400mm , 24040901 switch 5amp , 24090201 socket 5 amp , board switch socket 2w 5amp , 240902 s.p. 15 oblic 16a,oneway modular switch , 24090201 socket 15 amp , 24090208 switch board , 0803 ceiling fan 24 inch 600mm 850 rpm 60w , board switch socket 4w 5amp , 24090113 pvc casing batten , 24090203 copper 1c 1100v wire 1.5mm2 , copper 1c 1.1kv grade wire 2.5 sqmm, automatic changeover switch, specification technical specification for 630 a, 3 phase auto changeover switch main supply, alternate supply with mccb 630 a in enclosed panel. 630 a auto oblic manual changeover switch for one main supply and one alternate supply alongwith 630 a mccb copper busbars of adequate rating with suitable insulation and colour coding shall be provided. suitable cable termination, earthing terminals, and control wiring shall be included. the equipment shall conform to iec 60947 6 1, iec 60947 3, and iec 61439 or equivalent indian standards. routine factory tests and test certificates shall be furnished with the equipment. enclosed box having auto oblic manual changeover mounted alongwith 630 a mccb the supplier shall provide ga drawings, wiring diagrams, operation manuals, and warranty documents. all non current carrying metallic parts, including the panel frame, doors, gland plates, mounting structures, and cable compartments, shall be effectively bonded to the main earth bus using copper earth strips or green oblic yellow insulated copper conductors. make schneider electric, abb, siemens, landt,hpl,bch, ceiling fan 48 inch for office with following specifications aluminium blades, copper winding motor with h insulation, double ball bearing, speed 340 to 380 rpm, sweep 1200mm, colour white oblic brown, power consumption 50w to 70w, power input 180 250 vac make bajaj,orient,havells,crompton,usha., wall mount fan make bajaj,orient,havells,crompton,usha, switch 5a . make havells,kaycee,anchor,orient,legrand, socket 5a make havells,kaycee,anchor,orient,legrand, switch board plastic for 5a 1switch plus 1socket make havells,kaycee,anchor,orient,legrand ., s.p. 15 oblic 16 amps, one way modular switch make havells,kaycee,anchor,orient,legrand ., socket 15a . make havells,kaycee,anchor,orient,legrand ., switch board make havells,kaycee,anchor,orient,legrand ., ceiling fan 600mm sweep, 850 oblic 900 rpm, 60 oblic 70watt , 220v ac single phase make havells,usha,bajaj,orient,orient ., switch board plastic for 5a 3switch plus 1socket make havells,kaycee,anchor,orient,legrand ., pvc casing caping batten, 25mm make sintex,supreme,presto plast,anchor or equivalent bis certified brand., pvc insulated highly flexible bare copper single core unsheathed 1100v grade wire of size 1.5sqmm and colour grey, construction 85 oblic 0.25, specification is 694 1977 make finolex,havells,anchor,kei,polycab ., pvc insulated highly flexible bare copper single core unsheathed 1100v grade wire of size 2.5 sqmm and colour grey, construction 50 oblic 0.25, specification is 694 1977 make finolex,havells,anchor,kei,polycab .
Agency / Dept :
uttar pradesh rajya vidyut utpadan nigam limited UPRVUNL
Due Date :
Oct 09, 2026 (1 day left)
Tender Value :
6.5L
View Documents
T18 Ref No : 17221770
Location : anantnag , jammu & kashmir
tender for annual rate contract of supply of aluminum / copper winding wires / strips of sizes and other allied material, t and p items required for reclamation/repair of damaged distribution transformers of various capacities at electric central workshop divis
Agency / Dept :
jammu and kashmir power development department JKPDD
Due Date :
Oct 05, 2026
Tender Value :
4.5Cr
View Documents
T18 Ref No : 16760547
Location : idar , gujarat
Source : GEM Tenders
tender for raw material for iti idar 11 kv ht cable termination kit 120 mm2x3 core allu xple , copper tube 10 mm dia , bare conductor 20 swg , ci 50x6 mm , bare conductor 8 swg , m.s conduit pipe 19 mm each 1 mtr pipe , 120 mm2 x 3 core xple ht cable , indicator 6 amp , batten holder , anabond tube for cylinder block , gi sheet 8x4 ft , drill bit set 1 to 12 mm , tap set m 6 , step down transformer 0to 12 volt , led 12 volt light for low voltage track , die penitrate kit , spark lighter , lathe tool bit 10x75 mm hss or carbide , lamp 100 watt , pvc cable trey midium gauge , carburator packing set for splender plus , 4 way wireless remote control , battery for ups practicel 12 volt 7 point 5 amphour , rcc drill bit 06 mm , lamp 200 watt , cable entry plate , low voltage track 12 volt , copper filler wire , flux for copper , rcc drill bit 05 mm , lamp 60 watt , filler road ms , earth clamp , gi big coke 1 by 2 inch , ms hex bolt m6x60mm , ss cable gland double compression 28 mm , cloak solution , thimble 2point 5 mm2 , heating elment for iron 1000 watt , hair serum , armstrong type tool bit holder , designer lace , rechargable battery holder 2 way , air filter for spldenr plus , carburator petrol pipe , cb point switch , ms flat 60x5 mm2 , bleaching powder formal base , cartridge type fuse 32 amp , pvc cable gland 19mm , filling road for cu tube winding , pvc alluminium sleeve 1 point5 mm2 , pvc cable gland 16mm , rubber hose clip , ulc 3 cable , 12 volt 10 amp dc cutout relay , 104 ceramic capacitor , bulb 6 volt 100 ma , bulb 6 volt 150 ma , carbon resistor 1k ohm 1watt , wiring for hornes for splendr plus , pixel led strip 5 mtr multicolor with controller 5 volt , bulb 6 volt 300 ma , electrolytic capacitor all type , ms hex nut m6 , thermister , ors pkt for dehydration , 50k presate register , electrolyte capacitor 8 mfd and 400 volt , pvc screw grip for 45x8 mm , pvc screw grip for 25x5 mm , resistence 20 ohm , resistence 10 ohm, as per specification file
Agency / Dept :
department of employment and training DET
Due Date :
Aug 28, 2026
Tender Value :
95.12K
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16874961
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for rewind of submersible motor 7.5 hp , sub cable 4 sqmm 3 core complete. , gm bearing bush , water seal , cable seal , revolving disc , sand guard , dol bush , dol sleave , ss distance sleeve , rottar sleeve turning and grinding , coupling key , impellar key , t nut , guide bush , gm neck ring , nut bolts with washer , rubber packing flange of size 150 mm , cable jointing kit , painting of submersible pump set , ms column pipe 100 mm dia medium grade , labour charges for taking out and relowering , labour charges for opening cutting rewinding , supply installation testing and commissioning , material and labour for making , attending day to day emergency breakdowns , attending day to day emergency breakdowns complaints of damaged , material and labour pcc 1 , supply and fixing rotational moulded , material and labour for disconnecting , supply only anti friction heavy duty , material and labour for removing swt column pipes , material and labour for earthing , supply laying 50 mm bore steel water , supply and fixing in replacement , excavation in trenches not , returning filling in including spreading leveling , removing excavated soil to a distance, repair and replacement to submersible pump set, rewind of submersible motor 7.5 hp, sub cable 4 sqmm 3 core complete., gm bearing bush, water seal, cable seal, revolving disc, sand guard, dol bush, dol sleave, ss distance sleeve, rottar sleeve turning and grinding, coupling key, impellar key, t nut, guide bush, gm neck ring, nut bolts with washer 1 by 2 x 2 inch, rubber packing flange of size 150 mm, cable jointing kit, painting of submersible pump set, ms column pipe 100 mm dia medium grade of 3 mtr in length, labour charges for taking out and relowering the sub pump set from bore well, labour charges for opening cutting rewinding cleaning complete the sub pump for repairing and refixing the same after repairing, assembling testing complete, supply installation testing and commissioning in repairs of sathya sai dosing drum adjustable dozing pump including fixing complete, material and labour for making 100 percentage serviceable to the amf lt panel startor suitable for motors and submersible pump by tracing out defects and replacing unsv parts including control wiring complete. minor parts such as nuts, bolts, washers, thimbles etc shall be deemed to be included in the quoted rate., attending day to day emergency breakdowns complaints of damaged water supply lines of 15 to 25mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply., attending day to day emergency breakdowns complaints of damaged water supply lines of 40mm to 50mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply, attending day to day emergency breakdowns complaints of damaged water supply lines of 80mm to 150mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply, material and labour pcc 1 ration 3 ratio 6 type c1 using 20 mm graded stone aggregate for platform of motor and water storage tank size 1.5 x 1.5 x 0.4m etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete., supply and fixing rotational moulded polyethylene water storage tank inner and out white five layers isi marked cylinderical vertical with closed top hoisted with threaded cap and fixed of capacity 2000 liters each including all accessories including taking down of old broken water tank complete., material and labour for disconnecting and removing the squirrel cage 3 phase 415 volts 50 hz induction motor of 7.5 hp capacity from its foundations by disconnecting electrical connections and motor couplers taking it to workshop for repair and dismantling and opening up of motor removing burnt out winding wires complete cleaning startor and rotor assembly, supply only anti friction heavy duty bearings suitable for 7.5 hp., material and labour for removing swt column pipes upto 100 mm dia with submersible flat cable of any type and dismantling and taking up down submersible pump and motor assembly of capacity 7.5 hp shifting to workshop and removing unserviceable spares replacing with new spares such impeller bushes distance bush seal etc of same specifications type model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets assembling back and testing for proper function including necessary machining works as required bringing back and reinstalling into the swt complete., material and labour for earthing in repalcement complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to and including 25 x 4 mm galvanised earth strip by means of bolts nuts check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical, supply laying 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths laid in trenches complete with all fittings such as bends elbows tee short pieces connectors back nuts diminishing pieces caps and plugs unions etc including taking down old unsv pipe any type complete, supply and fixing in replacement direct on line starter in sheet metal enclosure for motor rating 415 volts 3 phase 50 hz 9-14 amps relay maximum range of capacity 7.5 hp complete, excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft loose soil complete, returning filling in including spreading leveling watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete, removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete
Agency / Dept :
indian army
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Winding Strip. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Winding Strip sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Winding Strip Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Winding Strip, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Winding Strip Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Winding Strip Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Winding Strip.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Winding Strip depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Winding Strip Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Winding Strip bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Winding Strip. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Winding Strip, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Winding Strip, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Winding Strip?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Winding Strip tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Winding Strip?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Winding Strip, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Winding Strip is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All