sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

13Latest Vibration absorber Tenders List

Latest Vibration absorber Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Vibration absorber tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Vibration absorber tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Vibration absorber Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Vibration absorber tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Vibration absorber Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Vibration absorber Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Vibration absorber Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Vibration absorber tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Vibration absorber Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Vibration absorber sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Vibration absorber tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Vibration absorber tenders.

Is EMD mandatory for all Vibration absorber tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Vibration absorber work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Vibration absorber tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Vibration absorber Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17729285
Location : nagpur , maharashtra
LIVE TENDER
tender for vibration absorber., door lock, plasser part no. pp.spr.0055. make: plasser. warranty: six months from the dat e of supply - warranty period: 6 months after the date of delivery
Agency / Dept :
south east central railway SECR
Due Date :
Nov 04, 2026 (20 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17632437
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
tender for sports equipment tender 1 ball badminton racket fibre made , ball badminton racket wooden , ball badminton ball , ball badminton net match quality , ball badminton net pratice quality , ball badminton pole complete set , baseball slugger , baseball weighted slugger pratice , baseball slugger grip , baseball , baseball plastic ball practice , baseball rubber ball practice , baseball gloves , baseball batting gloves , baseball batting helmet , baseball face mask , baseball catcher kit complete , baseball umpire kit complete , baseball bases set with home and pitching plate , baseball t stand for batting , baseball net size 100 x 20 , baseball net size 100 x 8 , baseball ball carry bag , baseball iron pipe 8 , baseball nails , baseball abdominal guard , baseball bowling machine , baseball shin guard , baseball puggs , baseball batting screen , baseball speed gun , baseball fungo bat , baseball batting mask , baseball elbow guard , basketball board , basketball ring , basketball net , basketball poles movable , basketball poles fixed , basketball pole padding , basketball foul marker set , basketball score sheet , basketball stop and go watch , basketball dummy , basketball jumping board , floorball stick , floorball balls , floorball goal keeper kit complete , floorball goal post , floorball goal post net , floorball scoresheet , football senior size , football junior size , football pendulum , football pole standard size , football pole junior size with net 8ftx6ft , football net , football shooting board , football target , football substitution board , football referee card , football referee flag , football corner flag , football dummy , football shin guard , handball men size , handball women size , handball mini size , handball net , handball poles with net movable iron made , handball boundary net for one court , handball refree tool kit , handball dummy , handball score sheet , lawn tennis racket , lawn tennis ball , lawn tennis net , lawn tennis poles , lawn tennis ball carry trolley , lawn tennis tennis gut , lawn tennis soft tennis ball , lawn tennis wiper for tennis court , lawn tennis grip , netball , netball poles , netball net , sepak tekraw balls for men , sepak tekraw balls for women , sepak tekraw net , sepak tekraw poles , softball slugger , softball weighted rings practice 12oz , softball weighted rings practice 16oz , softball weighted rings practice 24oz , softball slugger grip , softball 12 with center cork graphite , softball dimple ball 12 , softball gloves , softball batting gloves , softball batting helmet , softball catcher kit large , softball umpire kit , softball bases set with home and pitching plate , softball t stand for batting , softball net size 100x 20 , softball ball carry bag , weighted softball for pitching pratice 12 inch 10 oz , weighted softball for pitching pratice 12inch 11 oz , weighted softball for pitching pratice 12 inch12 oz , softball batting screen , softball matting nails , softball betters face mask , softball pitching face mask , softball inner gloves , softball elbow guard , softball abdominal guard , oversize softball 14 inch , softball slugger 32 inch , softball slugger 33 inch , softball slugger 34 inch , softball pitching machine , softball catcher kit small , softball catcher kit medium , softball match ball , softball boundary arena , softball pitchers mat , softball iron pole 20 foot , fungo bat softball , softball speed gun , table tennis table complete set , table tennis racket , table tennis ball , table tennis net with clumps , table tennis flooring , table tennis score board manual , table tennis ball carry trolley , tt ply , tt rubber , edge tape , throwball , throwball poles , throwball net , throwball antenna , throwball net wire , throwball adjuster , volleyball , volleyball net , volleyball antenna , volleyball poles , volleyball horizontal ring for training , volleyball vertical ring for training , volleyball referee stand , volleyball plyometric boxes , volleyball pressure gauge , volleyball hanging ball stand , volleyball boundary net for one court , volleyball score board - manual , volleyball rebounder , basketball no 7 , basketball no 6 , basketbakk, racket 100 percent full carbon fiber weight g about 145g as per international norms and standards, height 1377 mm wight 100 grams leant 661 mm material normal grade wooden with lamination as per international norms and standards, yellow ball made of wool weight 22 to 25 grams, made of cotton nylon 1meter height 12 point 5meter length as per norms & standards of bbfi, made of cotton nylon 1meter height 12 point 5meter length as per norms & standards of bbfi, mettalic with proper pullies hooks & complete painted pole 60mm, 2 point 5 inch round pipe, length 25inch to 30 inch weight 12 to 18 oz 100percent composite t ball barrel as per international norms and standards, slugger with removable weight, for pratice as per international norms and standards, slip resistant, absorbing vibration & shock with porper grip as per international norms and standards, 229 to 235 mm in circumference with a weight of 5 to 5 point 25 ounces made of fine leather with cushioned cork centre as per international norms and standards, made of fine material with proper grip, for training purpose as per international norms and standards, made of fine material with proper grip as per international norms and standards, made of molded abs plastic and foam as per international norms and standards, high-strength steel frame material as per international norms and standards as per international norms and standards, set includes catchers helmet, chest protector, pair of leg guards premium abs shell form fitting design as per international norms and standards, solid wire frame with synthetic ergo fit pads 17mm foam pads as per international norms and standards polyester satin front cover and twill back, full set includes 1 home plate, 3 bases, and 1 pitching ultra sturdy rubber as per international norms and standards, made of fine material with adjustable height as per international norms and standards, made of fine material with proper interlocking all around the corners as per international norms and standards, durable & made of fine material as per international norms and standards, mettalic with hooks and properly painted as per international norms and standards, mettalic, length approx 5 to 6cms as per international norms and standards, high impact resistant poly protector as per international norms and standards, electronic with various speed adjustments as per international norms and standards, made of fine & protective material as per international norms and standards, made of fine material folding type as per international norms and standards, made of fine material detechable type as per international norms and standards, battery opertaded, digital, handy easy to carry as per international norms and standards, made of fine material, well balanced with proper grip as per international norms and standards, made of fine material with proper visibility as per international norms and standards, made of acrylic fibre sheet with iron support around the corners, mettalic with shock absorber system, nylon made, white colour with 12 loops, as per international norms & standards, movable poles made from channel frame 6 inch dia, 25 mm acrylic board ring & net, net pole with 25mm acrylic board ring & net, fixed, 2 point 2 mtr ext. 6 inch round pipe, heavy duty weather resistant vinyl thick foam padding, made of fine & durable material, triplicate paper with proper binding, digital manual operated, made of fine and durable material, made of fine and durable material with heavy duty springs and floding type, lightweight composite shaft and soft pu grip for easy play and durability, made of fine material with proper grip, the aerodynamic dimpled surface allows for better airflow increased stability and greater curve potential on shots, extremely breathable and keeps the goalkeeper dry and comfortable, one piece structure made of steel pipe with powder coating, polypropylene interlocking tiles approved by fiba, itf, match quality, synthetic or pu material, standard size no 5 with bladder, properly stiched, circumference 68 to 70 cms, weight 410 to 450 gms, as per international norms and standards, synthetic or pu material, standard size no 4 with bladder, properly stiched, circumference 63 point 5 to 66 cms, weight 330 to 390 gms, as per international norms and standards, synthetic or pu material, standard size no 5 with bladder, properly stiched, pendulum type, mettalic, heavy duty as per international norms & standards, mettalic, heavy duty with nets, hdpe material with dori, mesh size 120 square mm approx, as per international norms and standards, high quality reversible rebound board. boasting a 4 in 1 design providing a wide range of passing & shooting drills, made of durable and fine material for training as per international norms and standards, made of durable & fine material as per international norms and standards, brightly colored flags for enhanced visibility on the field pack of 4 poles, ideal for setting up versatile agility drills, material the soccer dummies for training is made of high flexibility and wear resistant mesh cloth and iron spring nails as per international norms and standards, eva cushioned football protective gear for soccer, synthetic made, size no 3, circumference 56 to 58 cms, weight 425 to 475 gms, as per international norms & standards, synthetic made, size no 2, circumference 52 to 54 cms, weight 325 to 375 gms, as per international norms & standards, synthetic made, size no 1, circumference 48 to 50 cms, weight 225 to 275 gms, as per international norms & standards, made of durable and fine material, size as per international norms and standards, movable type, size as per international norms and standards, made of fine material with proper interlocking all around the corners, made of fine & durable material as per international norms and standards, fine paper with proper binding as per international norms and standards, made of graphite with proper gutting & grip, made of fine felt with proper pressure and bounce, size 2point 57 inch to 2point70 inch in diameter, weight 1point98 oz to 2 point 10 oz, yellow colour packed in vaccum proof box, should be ideal for all courts, as per international norms & standards, material hdpe, mesh size 45 mm high shock resistance our nets are machine made to ensure uniform square meshes, providing better strength when faced with high shock making them ideal for professional use, made up of high grade alloy metal 75 mm square pipe with brass rachet fixed in ground, aluminium frame and heavy duty mesh fabric bordered with coloured nylon fabric on top, made of multifilament as per international norms & standards, made of fine felt as per international norms & standards, made of durable & fine material as per international norms & standards, rubber quality, synthetic or pu material, standard size no 4 with bladder, properly stiched,, mettalic, heavy duty, fine material, white colour with 12 loops, as per international norms & standards, plastic pvc weight 170 to 180 grams ball diameter 13 cm as per international norms & standards, made of fine & durable material as per international norms & standards, made out of42mm steel height 1 point 55m base with 80kg internal counterweight white powder coated use with net tension by crank, composite well balanced with proper grip, made of durable & fine material, slip resistant, absorbing vibration & shock with porper grip, made of fine leather with cushioned cork centre, made of fine material with proper grip, for training purpose, set includes catchers helmet, chest protector, pair of leg guards premium abs shell form fitting design, solid wire frame with synthetic ergo fit pads 17mm foam pads polyester satin front cover and twill back, full set includes 1 home plate 3 bases and 1 pitching ultra sturdy rubber, made of fine material with adjustable height, durable & made of fine material, made of fine material detechable type, mettalic, length approx 5 to 6cms, composite, well balanced with proper grip, as per international norms and standards, made of fine material as per international norms and standards, table tennis table with 25 mm thick board, constructed durably for zero vibration,, table tennis bat made of ply with red & black rubber on each side of bat, as per international norms & standards, plastic made, size 40mm plus , colour white, weight 2 point 7 gms approx, as per international norms & standards, mettalic clumps with fine material net, size & specifications as per international norms & standards, durable with shock absorbing, abrasion resistant & anti skid material with proper installation as per international norms, durable & fine material, made of aluminium frame and heavy duty mesh fabric bordered with coloured nylon fabric on top, high density, smooth surface, and consistent bouncing, cloth material, synthetic leather, or pvc, durable & fine material, hand stiched with proper size & grip, metallic, heavy duty with adjusters & pullies etc,, durable & fine material, with proper dori etc., durable & fine material, with non tearing tape, metallic, heavy duty, made of leather pasted, multi coloured, diameter 65 to 67 cms, weight 260 to 280gms, as per international norms & standards, twistered hdpe thread material, size 10mtr x 1mtr, non tearing vinyal all around tape, machine knitted, uv treated, mesh size 10cms approx, pvc coated metal wire with rust proof eylets, as per international norms & standards, metallic, heavy duty with adjustable height, durable & fine material as per international norms and standards, made of fine material circumference 29 and half inch to 30 inch weight 20oz to 22oz as per international norms and standards, made of fine material circumference 28 and half inch to 29 inch weight 18oz to 20oz as per international norms and standards, made of fine material circumference 27 and half inch to 28 inch weight 16oz to 18oz as per international norms and standards
Agency / Dept :
department of education
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
6Cr
View Documents
T18 Ref No : 17702011
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
LIVE TENDER
tender for procurement of spares for water pumps - akcc 120 rfplavm hp10 ee9935v-b141507 , wearing ring ej3220d celv 80 160 0130 , oil seal ej3220d celv 80 160 2180 , roller bearing ej3220d celv 80 160 2250 , ang contact bearing ej3220d celv 80 160 2260 , stuffing box ej 3320d celvz 65 250 0110 , wear ring for hydraulic assembly ej3220d celvz 65 250 0130 , anti vibration mount avm ej3220d celvz 65 250 0970 , bearing housing ej3220d celvz 65 250 2100 , bearing cover ej3220d celvz 65 250 2110 , roller bearing for drive assembly ej3220d celvz 65 250 2250 , angular contract ball bearing for drive assembly ej3220d celvz 65 250 2260 , internal circlip inner circlip for drive assembly ej3220d celvz 65 250 2300 , adjusting ring ej3220d celvz 65 250 2300 , flexible metaflex coupling es6400b 9800000153 , impeller for swp es6400b 9800000154 , shaft along with sleeve for swp es6400b 9800000155 , coupling key for swp es6400b 9800000157 , impeller nut es6400b 9800000159 , bearing set for sw pump es6400b 9800000160 , mechanical seal for swp es6400b 9800000162 , impeller for cwp es6400b 9800000164 , shaft along with sleeve for cwp es6400b 9800000165 , coupling key for cwp es6400b 9800000167 , impeller nut for cwpes6400b 9800000169 , bearing set for cw pump es6400b 9800000170 , mechanical seal es6400b 9800000172 , shock damper akcc 220 ea3000b cp24511723005 , akcc 120 rfplavm hp 10 ee9935v b141507 , case wear ring ej2030v cv 65 250 b4m2vl 0130 , cplg spider ej2030v cv 65 250 b4m2vl 0201 , air wheel ej 2030v cv65 250 b4m2vl 1500 , hose complete ej 2030v cv65 250 b4m2vl 1501 , set screw ej2030v cv65 250 b4m2vl 1930 , mount resilient n0413 9235846 , mount resilient 250 lbs n0413 9235857 , shock absorber or damper sr6001d akcc 160 , shock absorber or damper akcc 85m sr6001d 949 03 063 , m16x75 hex screw and nut eb3010b bftem160750 , hex head bolt din 931 1 m16x75 ed 4006v 541397 , set screw m6x10 din933 ed4080d 3001 010ga081 , m16x75 ss316 nut and bolt with double washer eh3370v gn 060 0001, procurement of spares for water pumps, akcc 120 replavm hp10, wearing ring, oil seal, roller bearing, ang contact bearing, stuffing box, wearing for hydraulic assembly, anti vibration mount avm, bearing housing, bearing cover, roller bearing for drive assembly, angular contract ball bearing for drive assembly, internal circlip inner circlip for drive assembly, adjusting ring, flexible metaflex coupling, impeller for swp, shaft along with sleeve for swp, coupling key for swp, impeller nut, bearing set for sw pump, mechanical seal for swp, impeller for cwp, shaft along with sleeve for cwp, coupling key for cwp, impeller nut for cwp, bearing set for cw pump, mechanical seal, shock damper akcc 220, akcc 120 rfplavm hp 10, case wear ring, cplg spider, air wheel, hose complete, set screw, mount resilient, mount resilient 250 lbs, shock absorber or damper, shock absorber or damper akcc 85m, m16x75 hex screw and nut, hex head bolt din 931 1 m16x75, set screw m6x10 din933, m16x75 ss316 nut and bolt with double washer
Agency / Dept :
indian navy
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17759144
Location : kollam , kerala
Source : GEM Tenders
LIVE TENDER
corrigendum tender for quad copter 450 to 500mm class frame kit , brushless motor , esc 40a, 4s , flight controller , propellers 10 by 4.5 inch set , power distribution board, high current , power module , shock absorber set , lipo battery, 4s, 5200mah , radio transmitter and receiver,10 channel , gps and compass module , telemetry kit , wiring, connectors set , lipo battery charger, 4s, balance or multi-port, 450 to 500 mm class quad copter development and assembly kit, carbon fibre or composite quadcopter frame, 450 to 500mm wheelbase, fixed or foldable arm design, integrated fc or pdb mounting deck, frame weight less than or equal to 450g, payload capacity greater than or equal 800 gm., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal 20a, max thrust greater than or equal 1.2kg with 1045 propeller., blheli-compatible esc, continuous current rating 40a, input 4s lipo., 32-bit arm cortex-m7 or better processor, open-source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 10 by 4.5 inch propellers, factory-balanced cw/ccw pair per set, glass-fibre-reinforced nylon construction, adapter included., high current pdb, continuous rating greater than or equal 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input 4s to 6s lipo, regulated 5.3v/3a output to fc, analogue voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 450mm to 500 mm class frame., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., gnss module with integrated compass, update rate greater than or equal to 5hz, uart interface, compatible with listed flight controllers., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 4s to 6s lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 5200mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
2L
View Documents
T18 Ref No : 17759148
Location : kollam , kerala
Source : GEM Tenders
LIVE TENDER
corrigendum tender for quad copter 650 to 700 mm class frame kit , brushless motor , esc 40a, 6s , flight controller, 32-bit arm cortex- m7 class or better , propellers 15 by 5.5 inch, carbon fibre set , power distribution board , high current, 6s with bec , power module , shock absorber set , lipo battery, 6s, 8000mah , radio transmitter and receiver, 10 channel , gps and compass module m9n or equivalent , telemetry kit , wiring, connectors set , lipo battery charger, 6s, balance or multi port, 650 to 700mm class quad copter development and assembly kits, carbon fibre or glass reinforced composite quadcopter frame, 650 to 700 mm class wheelbase, fixed or foldable arm design, integrated mounting deck for flight controller, pdb and battery tray, arm wall thickness greater than or equal to 4mm carbon tube, frame weight less than or equal to 1100 to 1200 g, payload capacity greater than or equal to3kg, includes landing gear., brushless dc outrunner motor, kv rating 350 to 410kv, continuous current handling greater than or equal to 25a, max thrust greater than or equal to 1.5kg on 6s lipo with 15 inch propeller, unit weight 110g to 150g, blheli_32 (or equivalent) firmware esc, continuous current rating 40a (burst greater than or equal to 55a), input 6s lipo, 32-bit arm cortex m7 or better processor, open source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 15 by 5.5 inch carbon fibre reinforced propellers, self locking / quick release type, factory balanced cw/ccw pair per set., pdb rated for 6s input, continuous current handling greater than or equal to 100a, integrated 5v/3a and 12v/2a bec outputs, xt60 input connector, multiple esc output pads., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input up to 6s lipo, regulated 5.3v/3a output to fc, analog voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 650mm to 700 mm class frame., lithium polymer battery, 6s (22.2v nominal, 25.2v fully charged), capacity 8000mah, minimum continuous discharge rate 25c, equipped with an amass xt60 main power connector with balance connector, integral over-charge/discharge protection., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., u blox m9n (or equivalent) gnss module with integrated magnetometer/compass, position update rate greater than or equal to 10hz, uart/i2c interface, integrated led & safety switch pad., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 6s (22.2v) lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 8000mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
3L
View Documents
T18 Ref No : 16722553
Location : mumbai , maharashtra
Source : GEM Tenders
tender for es7518d-01-001-0001 , es7518d-021201800 , es7518d- 029150310 , es7518d-030303400 , es7518d-032300100 , es7518d-032300202 , es7518d-035319200 , es7518d- 038201501 , es7518d-05-005-0002 , es7518d-05-005- 0003 , es7518d-05-010-0001 , es7518d-05-033-0001 , es7518d-17200 , es7518d-17400 , es7518d-20000 , es7518d-23-047-0001 , es7518d-68414 , es7518d-91002 , es7518d-to610ss , es7518d-to650po , eh3370v- 034509000 , eh3370v-04-046-0001 , eh3370v-14014 , eh3370v-68478 , eh3370v-68482 , eh3370v-68492 , eh3370v-69003 , ee6120b-032300100 , ee6120b- 034505400 , ee6120b-22240 , ee6120b-37219260 , ee6120b-38213500 , ee6120b-54110100 , ee6120b- 77051rm, 25bt7c014, power contactor coil voltage 120v ac with inbuilt 1no aux, key, cover, vibration absorber, danfros rt 121 vacuum switch, vacuum gauge, ball valve dn50, shaft seal i 35 mm, indicating lamp red colour lens 120v, indicating lamp green colour lens 120v, ammeter 0100a dc suitable external shunt 50mvsize 72 72mm, solenoid valve 1 4, gasket neoprene for 1 150 flange, gasket neoprene for 2 150 flange, float switch single n c for use in v1 tank, motorised valve 220v 50hz cair mod series 2 on off type, mcb 20 amp, sealant silicone, toilet jets 610, toilet jets 50m floor, hose, pressure guage, flow control valve 10 00 gpm 15mx 12mx, fuse 1 amp 600v, fuse 2 amp 600v, fuse 8 amp 600v, pc board 3 phase, pressure switch, rubber elbow 50, oring seal seat included in item 10, oring, ball bearing, fd valve, plate electrode 12m primary anode
Agency / Dept :
indian navy
Due Date :
Sep 01, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17214112
Location : new delhi , delhi
tender for procurement of suction vibration absorber for saloon, suction vibration absorber for saloonhvac of rs-2specifications:tube mater ial: red brassbraid material: bronzeferrule material: copperconnection material: copperworking pre ssure: 540 psig or 37 bar,model: vaf-9make- packlessorfaiveleyorsidwal(note: sub supplier t o provide oem geniuses certificate alonwith manufacturer mark and inspection certificates)
Agency / Dept :
delhi metro rail corporation DMRC
Due Date :
Sep 25, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17371200
Location : sonitpur , assam
Source : GEM Tenders
tender for long range frame kit , brushless motor , glass fiber nylon propeller , electronic speed controller , flight controller , video transmitter , dual antenna , patch antenna , dual band radio controller , compact li ion battery pack , fpv camera , silicone wire 28awg , power connector , extra- soft silicon wire , high quality silicone wire , ultra flexible silicone wire , dual band receiver , av wireless receiver , long endurance brushless motor , folding propeller set , flight controller with power module and gps , voltage regulator , dual channel battery charger , multi copter frame , housing connector with wire , anti vibration shock absorber , monitor display screen , fixed wing drone kit , metal gear digital servo , electronic speed controller fixed wing , xross band receiver , long range image transmission module , brushless motor fixed wing , ultra long range data module, drone accessories, as per specification uploaded in the bid
Agency / Dept :
indian army
Due Date :
Sep 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17070511
Location : mumbai , maharashtra
Source : GEM Tenders
corrigendum tender for es7518d-01-001-0001 , es7518d-021201800 , es7518d- 029150310 , es7518d-030303400 , es7518d-032300100 , es7518d-032300202 , es7518d-035319200 , es7518d- 038201501 , es7518d-05-005-0002 , es7518d-05-005- 0003 , es7518d-05-010-0001 , es7518d-05-033-0001 , es7518d-17200 , es7518d-17400 , es7518d-20000 , es7518d-23-047-0001 , es7518d-68414 , es7518d-91002 , es7518d-to610ss , es7518d-to650po , eh3370v- 034509000 , eh3370v-04-046-0001 , eh3370v-14014 , eh3370v-68478 , eh3370v-68482 , eh3370v-68492 , eh3370v-69003 , ee6120b-032300100 , ee6120b- 034505400 , ee6120b-22240 , ee6120b-37219260 , ee6120b-38213500 , ee6120b-54110100 , ee6120b- 77051rm, 25bt7c014, power contactor coil voltage 120v ac with inbuilt 1no aux, key, cover, vibration absorber, danfros rt 121 vacuum switch, vacuum gauge, ball valve dn50, shaft seal i 35 mm, indicating lamp red colour lens 120v, indicating lamp green colour lens 120v, ammeter 0100a dc suitable external shunt 50mvsize 72 72mm, solenoid valve 1 4, gasket neoprene for 1 150 flange, gasket neoprene for 2 150 flange, float switch single n c for use in v1 tank, motorised valve 220v 50hz cair mod series 2 on off type, mcb 20 amp, sealant silicone, toilet jets 610, toilet jets 50m floor, hose, pressure guage, flow control valve 10 00 gpm 15mx 12mx, fuse 1 amp 600v, fuse 2 amp 600v, fuse 8 amp 600v, pc board 3 phase, pressure switch, rubber elbow 50, oring seal seat included in item 10, oring, ball bearing, fd valve, plate electrode 12m primary anode
Agency / Dept :
indian navy
Due Date :
Sep 15, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16664022
Location : dantewada - cg , chhattisgarh
Source : GEM Tenders
corrigendum tender for spares for tata marcopolo bs 3 and bs 6 buses 1600350152 - air pre. transducer bs 3 4, part no. 208254109908 , 1600022313 - cover gear part no. 278601989902 , 1600350211 - gasket int manifold cover part no. 278601989912 , 1600022319 - gasket ,cylinder head part no. 278601995304 , 1600022320 - gasket valve cover part no. 278601989918 , 1600013022 - ball bearing 6204 part no. 2523031003 , 1600350215 - damper vibration part no. 278603990121 , 1600350217 - screw hex flange hd cap part no. 278603999937 , 1600013569 - fly wheel part no. 278603990196 , 1600030910 - gasket housing front and rear part no. 269126105303 , 1600022507 - gasket front cover upper part no. 269126255302 , 1600030908 - gasket front cover lower part no. 269126255303 , 1600350196 - speedo adaptor rear cover upper part no. 269126203426 , 1600350197 - speedo pinion rearcover upper part no. 269126207910 , 1600013509 - gasket rear cover upper part no. 269126205302 , 1600350198 - assy. drive sft g600-6.58 thr brg bs1-4 part no. 269126250135 , 1600022523 - main shaft thrust brg arrgmt part no. 269126207911 , 1600022789 - assy ball joint rh threads part no. 264126800224 , 1600037243 - sel and shifter yoke-gbs40 full remote part no. 257326805101 , 1600350200 - assy gear shift lever knob part no. 275126800134 , 1600022542 - assy alumn master cylinder part no. 280829100112 , 1600022594 - clutch slave cyl part no. 275429100106 , 1600350223 - assy. clutch pipe 6 od part no. 283929100102 , 1600350199 - assy pull rod part no. 275030100117 , 1600022377 - assy acc. cable part no. 277030100126 , 1600037252 - front spring bracket front - rh, part no. 277832103702 , 1600037253 - front spring bracket front - lh, part no. 277832103701 , 1600350202 - reinforcement-rh part no. 277831207112 , 1600350203 - reinforcement- lh part no. 277831207113 , 1600022529 - front spring rear bracket rh part no. 277832103704 , 1600022368 - cross member part no. 25763120 0106 , 1600022692 - rear spring bkt rh front and lh rear part no. 277832403708 , 1600022691 - rear spring bkt lh front and rh rear part no. 277832403707 , 1600051341 - assy main leaf with bracket part no. 277832100109 , 1600051342 - assy second leaf with bracket part no. 277832100115 , 1600022552 - assy front shock absorber part no. 277832300102 , 1600013135 - bush half top part no. 257132803402 , 1600013134 - bush half botton part no. 257132803401 , 1600013287 - rubber bush part no. 257632807502 , 1600013316 - u- clamp rear spring part no. 259932504201 , 1600031118 - weweller rubber part no. 277832407702 , 1600051348 - 1st leaf weveler spring part no. 277832400116 , 1600030803 - assy second leaf with bracket part no. 277832400117 , 1600022690 - spring collar bracket rear part no. 277832407130 , 1600022528 - assy stub axle std part no. 257533200125 , 1600013289 - spacer part no. 257633208601 , 1600350191 - bush king pin bs 1 2 3 4 part no. 257533203401 , 1600037312 - tapper roller thrust bearing for king pin part no. 284633203101 , 1600022322 - king pin normal part no. 257633206709 , 1600022478 - front axle bearing 32308 inner part no. 257633403101 , 1600350192 - thrust washer bs 1 2 3 4 part no. 257533409201 , 1600022479 - front axle bearing outer part no. 257633403103 , 1600037294 - hub bolt part no. 263140106701 , 1600013554 - front break drum part no. 277642103701 , 1600013564 - brake chamber type 24 part no. 278242100106 , 1600055921 - assy slack adj lh haldex part no. 277842300101 , 1600013560 - slake adjuster frt rh part no. 277842300102 , 1600350231 - kit-cam end spring bs 3 and 4 part no. 501442109902 , 1600037402 - spring abutprinted part no. 288042108702 , 1600037318 - bush-bracket end part no. 288042103404 , 1600013177 - circlip camshaft part no. 257342104303 , 1600051344 - mnrkit fnt brklng st 1.0 0 part no. 288042990102 , 1600025786 - minor kit front brake lining set std part no. 288042990101 , 1600350225 - sleeve -delrin part no. 288042108401 , 1600037316 - oil seal part no. 288042107801 , 1600037412 - spacer for front brake part no. 288042108601 , 1600350230 - shim - 1.0 mm part no. 501442108303 , 1600037315 - shim part no. 501442108302 , 1600022549 - oil seal part no. 266835607703 , 1600022555 - differential housing assy part no. 257535300105 , 1600295498 - thrust washer 2.00 mm part no.257335309203 , 1600350189 - th washer 2.05 mm 102x67 part no. 257335309204 , 1600350190 - th washer 2.10 mm 102x67 part no. 257335309205 , 1600022554 - spherical washer bevel gear part no. 257535309201 , 1600350155 - shim 0.10 mm part no. 206035318306 , 1600350156 - shim 0.15 part no. 206035318307 , 1600013372 - brake actuator part no. 263243710137 , 1600037314 - circlip part no. 257342104303 , 1600037406 - shim 1.0 part no. 257342108302 , 1600037405 - shim 0.5 part no., 1600350152 - air pre. transducer bs 3 4, part no. 208254109908, 1600022313 - cover gear part no. 278601989902, 1600350211 - gasket int manifold cover part no. 278601989912, 1600022319 - gasket ,cylinder head part no. 278601995304, 1600022320 - gasket valve cover part no. 278601989918, 1600013022 - ball bearing 6204 part no. 2523031003, 1600350215 - damper vibration part no. 278603990121, 1600350217 - screw hex flange hd cap part no. 278603999937, 1600013569 - fly wheel part no. 278603990196, 1600030910 - gasket housing front and rear part no. 269126105303, 1600022507 - gasket front cover upper part no. 269126255302, 1600030908 - gasket front cover lower part no. 269126255303, 1600350196 - speedo adaptor rear cover upper part no. 269126203426, 1600350197 - speedo pinion rearcover upper part no. 269126207910, 1600013509 - gasket rear cover upper part no. 269126205302, 1600350198 - assy. drive sft g600-6.58 thr brg bs1-4 part no. 269126250135, 1600022523 - main shaft thrust brg arrgmt part no. 269126207911, 1600022789 - assy ball joint rh threads part no. 264126800224, 1600037243 - sel and shifter yoke-gbs-40 full remote part no. 257326805101, 1600350200 - assy gear shift lever knob part no. 275126800134, 1600022542 - assy alumn master cylinder part no. 280829100112, 1600022594 - clutch slave cyl part no. 275429100106, 1600350223 - assy. clutch pipe 6 od part no. 283929100102, 1600350199 - assy pull rod part no. 275030100117, 1600022377 - assy acc. cable part no. 277030100126, 1600037252 - front spring bracket front - rh, part no. 277832103702, 1600037253 - front spring bracket front - lh, part no. 277832103701, 1600350202 - reinforcement-rh part no. 277831207112, 1600350203 - reinforcement-lh part no. 277831207113, 1600022529 - front spring rear bracket rh part no. 277832103704, 1600022368 - cross member part no. 25763120 0106, 1600022692 - rear spring bkt rh front and lh rear part no. 277832403708, 1600022691 - rear spring bkt lh front and rh rear part no. 277832403707, 1600051341 - assy main leaf with bracket part no. 277832100109, 1600051342 - assy second leaf with bracket part no. 277832100115, 1600022552 - assy front shock absorber part no. 277832300102, 1600013135 - bush half top part no. 257132803402, 1600013134 - bush half botton part no. 257132803401, 1600013287 - rubber bush part no. 257632807502, 1600013316 - u-clamp rear spring part no. 259932504201, 1600031118 - weweller rubber part no. 277832407702, 1600051348 - 1st leaf weveler spring part no. 277832400116, 1600030803 - assy second leaf with bracket part no. 277832400117, 1600022690 - spring collar bracket rear part no. 277832407130, 1600022528 - assy stub axle std part no. 257533200125, 1600013289 - spacer part no. 257633208601, 1600350191 - bush king pin bs 1 2 3 4 part no. 257533203401, 1600037312 - tapper roller thrust bearing for king pin part no. 284633203101, 1600022322 - king pin normal part no. 257633206709, 1600022478 - front axle bearing 32308 inner part no. 257633403101, 1600350192 - thrust washer bs 1 2 3 4 part no. 257533409201, 1600022479 - front axle bearing outer part no. 257633403103, 1600037294 - hub bolt part no. 263140106701, 1600013554 - front break drum part no. 277642103701, 1600013564 - brake chamber type 24 part no. 278242100106, 1600055921 - assy slack adj lh haldex part no. 277842300101, 1600013560 - slake adjuster frt rh part no. 277842300102, 1600350231 - kit-cam end spring bs 3 and 4 part no. 501442109902, 1600037402 - spring abutprinted part no. 288042108702, 1600037318 - bush-bracket end part no. 288042103404, 1600013177 - circlip camshaft part no. 257342104303, 1600051344 - mnrkit fnt brklng st 1.0 0 part no. 288042990102, 1600025786 - minor kit front brake lining set std part no. 288042990101, 1600350225 - sleeve -delrin part no. 288042108401, 1600037316 - oil seal part no. 288042107801, 1600037412 - spacer for front brake part no. 288042108601, 1600350230 - shim - 1.0 mm part no. 501442108303, 1600037315 - shim part no. 501442108302, 1600022549 - oil seal part no. 266835607703, 1600022555 - differential housing assy part no. 257535300105, 1600295498 - thrust washer 2.00 mm part no.257335309203, 1600350189 - th washer 2.05 mm 102x67 part no. 257335309204, 1600350190 - th washer 2.10 mm 102x67 part no. 257335309205, 1600022554 - spherical washer bevel gear part no. 257535309201, 1600350155 - shim 0.10 mm part no. 206035318306, 1600350156 - shim 0.15 part no. 206035318307, 1600013372 - brake actuator part no. 263243710137, 1600037314 - circlip part no. 257342104303, 1600037406 - shim 1.0 part no. 257342108302, 1600037405 - shim 0.5 part no. 288042308301, 1600037317 - bush- cam end part no. 288042103403, 1600037401 - spring cam end part no. 288042108701, 1600350226 - cam shaft lh for rear brake part no. 288042307901, 1600350227 - cam shaft rh for rear brake part no. 288042307902, 1600012884 - uj cross part no. 206741120116, 1600217119 - center bearing part no. 275041304303, 1600350209 - air dryer 9bar- voss part no. 277843700119, 1600022712 - four circuit port valve 8-1 part no. 277843700120, 1600037429 - graduated hand cntrol valve part no. 284643700162, 1600022506 - hand brake valve kb part no. 263243700151, 1600350210 - relay valve bs 2 3 4 6 part no. 278243700147, 1600030870 - dual treadle valve part no. 284643710109, 1600013566 - quick release valve part no. 278243700149, 1600037433 - salenoid valve part no. 551945300101, 1600022527 - assy stg wheel complete 470 dia part no. 280846400101, 1600037438 - assy. universal joint part no. 265146600102, 1600037439 - universal joint part no. 206746600105, 1600030779 - assy brakcet stg gear box mtg part no. 275046100101, 1600037437 - assy. drag link part no. 206346000112, 1600025793 - assy power stg. gear box rane part no. 261846600102, 1600052621 - assy power steering pump direct drive part no. 275446600101, 1600022487 - assy tube part no. 207346800117, 1600022488 - assy pipe strg pump to strg g 8 part no. 131546800087, 1600022495 - assy tube with crimped rubber hose part no. 207346800119, 1600037443 - inpact shaft seal kit part no. 257346200115, 1600037444 - thrust brearng kit part no. 257346203103, 1600350154 - inte. joint to baby filter 15 o.d. part no. 131547100083, 1600037436 - exhaust brake cyl 40 dia part no. 216343700166, 1600350188- hose engine to radiator inlet part no. 207650105808, 1600350222 - rub hose eng outlet part no. 278650105844, 1600350153 - hex bolt m10x160 is1364p1-8.8 ss8451-8c part no. 11063810748, 1600037460 - hose clamp part no. 14280599302, 1600037464 - rubber hose part no. 207650105846, 1600030765 - aluminium rivets part no. 885442200709, 1600037254 - frnt spring rear bracket rh part no. 277832103704, 1600037255 - rear spring bkt lh frnt and rh rear part no. 277832403707, 1600037256 - rear spring bkt rh frnt and lh rear part no. 277832403708, 1600045521 - oil filter cap marcopolo part no. 278601990196, 1600052515 - oil seal part no. 250626207804, 1600022477 - oil seal front hub 1510 part no. 257633407801, 1600027552 - thrust washer 1.95 mm thick part no. 257335309202, 1600052590 - drain valve with filter part no. 257643790159, 1600031801 - repair kit brake actuator 24 75 part no. 263243910169, 1600026827 - repair kit qrv part no. 263242910189, 1600052643 - assy radiator - lpo 130 hp tc bs-iii part no. 207650000201, 1600012758 - nut nylock m10 part no. 12140501008, 1600031814 - hose clamp tb54 part no. 14280598217, 1600013555 - rear break drum part no. 277642303706, 1600037282 - brake drum front part no. 277642103702, 1600037375 - brake drum spigodded part no. 277642303709, 1600037143 - clutch disc 352 dia bs4 part no. 581225200101, 1600037144 -clutch cover 352 dia bs4 part no. 581225400101, 1600022273 - release bearing 352 mm dia clutch part no. 275225400110, 1600037321 - kit lining set front std. part no. 885442011512, 1600037322 - kit lining set front os1 part no. 885442021512, 1600037323 - kit lining set front os2 part no. 885442031512, 1600037458 - radiator assy. part no. 207650100196
Agency / Dept :
national mineral development corporation limited nmdc limited
Due Date :
Aug 11, 2026
Tender Value :
160.04Cr
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Vibration Absorber. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Vibration Absorber sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Vibration Absorber Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Vibration Absorber, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Vibration Absorber Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Vibration Absorber Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Vibration Absorber.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Vibration Absorber depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Vibration Absorber Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Vibration Absorber bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Vibration Absorber. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Vibration Absorber, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Vibration Absorber, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Vibration Absorber?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Vibration Absorber tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Vibration Absorber?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Vibration Absorber, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Vibration Absorber is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All