Filters By:

T18 Ref No
Keyword
State
City
Agency
Tender ID
Due Date
Tender Source
Tender Type

1,079Results forLatest Single switch Tenders List

Latest Single switch Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Single switch tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Single switch tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Single switch Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Single switch tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Single switch Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Single switch Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Single switch Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Single switch tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Single switch Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Single switch sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Single switch tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Single switch tenders.

Is EMD mandatory for all Single switch tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Single switch work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Single switch tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Single switch Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16259168
new Tender
Source : GEM Tenders
new Tender

tender for procurement of electrical switch and accessories flexible wire isi mark , 0.75 sqmm frlsh pvc insulated, single core copper wires , 1.5 sqmm frlsh pvc insulated, single core copper wires , 2.5 sqmm frlsh pvc insulated, single core copper wires , ceiling fan capacitor , led lamp 9 or 10w suitable for single phase 50 hz ac thread or normal type , led 6 w square surface light with aluminium housing , led 12 w square surface light with aluminium housing , 5 or 6 amp socket white colour piano type , 15 or 16 amp 5 pin socket white colour piano type , 5 or 6 amp single way switch white colour piano type , 15 or 16 amp single way switch white colour piano type , non modular fan regulator 1 m stepped type white colour 240 v 50 hz , modular electronic fan regulator stepped and 2 module type , pvc batten bulb holder. , isi approved pvc conduit , isi approved pvc casing caping , pvc u clip 20 mm , pvc bend 20 mm , 25 mtr pvc tape roll , 36 watt led driver for crompton 36 w 1 x 4 led panel indoor lighting , 40 watt led driver for outdoor lighting , 8.8 watt led bollard driver for outddoor lighting , pvc nail clip , pvc board 4x4 , pvc board , pvc board 6x8 , pvc board 8x10 , ding dong bell , buzzer bell , 1.5 inch isi approved steel screw , 2 inch isi approved steel screw , 6 mm pvc gitti , 10 mm pvc gitti , 6 mm dia masonry drill bit , 14 mm dia masonry drill bit , 1.5 - 6.5 mm high speed steel drill bit set , heavy duty hammer drill , 15 hp, 3 phase 415 volt, 50 hz star-delta starter, 23/76 flexible wire (isi mark), 0.75 sqmm frlsh pvc insulated, single core copper wires, 1.5 sqmm frlsh pvc insulated, single core copper wires, 2.5 sqmm frlsh pvc insulated, single core copper wires, ceiling fan capacitor 2.5 mfd, led lamp 9 or 10w suitable for single phase 50 hz ac thread or normal type, led 6 w square surface light with aluminium housing, led 12 w square surface light with aluminium housing, 5 or 6 amp socket white colour piano type, 15 or 16 amp 5 pin socket white colour piano type, 5 or 6 amp single way switch white colour piano type, 15 or 16 amp single way switch white colour piano type, non modular fan regulator 1 m stepped type white colour 240 v 50 hz, modular electronic fan regulator stepped and 2 module type, pvc batten bulb holder., 20 mm isi approved pvc conduit (mms), 20 x 3 mm isi approved pvc casing caping (mms), pvc u clip 20 mm, pvc bend 20 mm, 25 mtr pvc tape roll, 36 watt led driver for crompton 36 w 1 x 4 led panel indoor lighting, 40 watt led driver for outdoor lighting, 8.8 watt led bollard driver for outddoor lighting, pvc nail clip, pvc board 4x4, pvc board 4x7 (2+2), pvc board 6x8, pvc board 8x10, ding dong bell, buzzer bell, 1.5 inch isi approved steel screw, 2 inch isi approved steel screw, 6 mm pvc gitti, 10 mm pvc gitti, 6 mm dia masonry drill bit, 14 mm dia masonry drill bit, 1.5 - 6.5 mm high speed steel drill bit set, rotary hammer drill (heavy duty), 15 hp, 3 phase 415 volt, 50 hz star-delta starter


Tender Value : 200000
Due Date : Aug 04, 2026
T18 Ref No : 16257894
new Tender
Location : mumbai , maharashtra
Source : GEM Tenders
new Tender

corrigendum tender for supply installation testing and commissioning of wi fi access points including 1 year warranty controller licenses and installation charges , supply installation testing and commissioning of 48 port poe switches with all accessories including 1 year warranty controller licenses and installation charges , supply installation testing and commissioning of 24 port poe switches with all accessories including 1 year warranty controller licenses and installation charges , supply installation testing and commissioning of 48 port non poe switches for data center populated with transceivers including 1 year warranty , sdwan device for data centre including 1 year warranty and controller licenses , sdwan device for branch offices including 1 year warranty and controller licenses , implementation charges of sdwan per device , supplying and fixing of 19u rack with 1 mountable tray and 6 16 amps 6 socket including consumables and rack dressing , supplying and fixing of 12u rack with 1 mountable tray and 6 16 amps 6 socket including consumables and rack dressing , supply installation testing and commissioning cat6 48 port ethernet jack panel , supply installation testing and commissioning rack mountable tray , supply installation testing and commissioning of cat6 cables , supply installation testing and commissioning of cat6 armoured cable , supply and fixing of a set of male female rj45 connector for cat 6 cables , supplying fixing i o with i o plate 2 way and single i o plate , supply installation testing and commissioning back box pvc box size 4 x 4 for rj 11 plug socket , supplying and fixing of pvc casing and capping of sizes 0 75 to 2 , supplying fixing of pvc conduit of different sizes 20 25 32 40 50 mm , supply installation testing and commissioning cat6 patch cords 1 mtr , supplying and laying fibre optic cable 6 core single mode armoured , supplying fixing media converter single mode fiber to rj45 , charges for rack dressing testing tracking and labelling of lan cables per rack , amc charges of access points for line item 10 , amc charges of 48 port switches for line item 20 , amc charges of 24 port switches for line item 30 , amc charges for dc switches for line item 40 , amc charges of sdwan device data center for line item 50 , amc charges of sdwan device branch offices for line item 60 , charges for annual managed services, supply and implementation of wireless network and sdwan solution at location offices, supply installation testing and commissioning of wi fi access points including 1 year warranty controller licenses and installation charges, supply installation testing and commissioning of 48 port poe switches with all accessories including 1 year warranty controller licenses and installation charges, supply installation testing and commissioning of 24 port poe switches with all accessories including 1 year warranty controller licenses and installation charges, supply installation testing and commissioning of 48 port non poe switches for data center populated with transceivers including 1 year warranty, sdwan device for data centre including 1 year warranty and controller licenses, sdwan device for branch offices including 1 year warranty and controller licenses, implementation charges of sdwan per device, supplying and fixing of 19u rack with 1 mountable tray and 6 16 amps 6 socket including consumables and rack dressing, supplying and fixing of 12u rack with 1 mountable tray and 6 16 amps 6 socket including consumables and rack dressing, supply installation testing and commissioning cat6 48 port ethernet jack panel, supply installation testing and commissioning rack mountable tray, supply installation testing and commissioning of cat6 cables, supply installation testing and commissioning of cat6 armoured cable, supply and fixing of a set of male female rj45 connector for cat 6 cables, supplying fixing i o with i o plate 2 way and single i o plate, supply installation testing and commissioning back box pvc box size 4 x 4 for rj 11 plug socket, supplying and fixing of pvc casing and capping of sizes 0 75 to 2, supplying fixing of pvc conduit of different sizes 20 25 32 40 50 mm, supply installation testing and commissioning cat6 patch cords 1 mtr, supplying and laying fibre optic cable 6 core single mode armoured, supplying fixing media converter single mode fiber to rj45, charges for rack dressing testing tracking and labelling of lan cables per rack, amc charges of access points for line item 10, amc charges of 48 port switches for line item 20, amc charges of 24 port switches for line item 30, amc charges for dc switches for line item 40, amc charges of sdwan device data center for line item 50, amc charges of sdwan device branch offices for line item 60, charges for annual managed services


Tender Value : 0
Due Date : Jul 22, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16257911
new Tender
Location : mumbai , maharashtra
Source : GEM Tenders
new Tender

tender for furniture interior , electrical , tv , hdd , camera , nvr , ptz webcam , 65 inch display , executive table (v4) (q2) , steel filing cabinets for general office purpose conforming to is 3313 (v2) (q2) , metal storage cabinet (q2) , revolving chair (v5) (q2) , chair for general purpose (q2) , waiting area / airport terminal / public place / reception area chair or seat (v2) (q2) , modular table / meeting table / centre table (v2) (q2), as per boq, providing assembling transporting placing fixing of modular l shape table, providing assembling transporting placing fixing of office table, glass partition, glass door, providing and fixing etching film as directed by cient architect for excess, providing and fixing solid core flush door shutter, providing and fixing soft fibre acoustical suspended ceiling system, providing and fixing, solid finish partition providing and fixing customized full height partition, providing and fixing full height mild steel storage rack made from slotted, 120 ltr waste bins waste bin providing and placing an eco friendly waste bin, providing and fixing artificial plantation and flower decoration work using, providing and fixing decorative photo frame made of seasoned hardwood mdf hdmr, providing and applying pearl luster finish paint of approved colour and shade, providing fixing, providing and fixing rollar blinds ami make or approved make shade of 38mm, design supply premium office signage board weather resistant made from, providing and fixing bulletin board pin up soft cork texture display board for, design supply premium office non magnetic single sided writing whiteboard, providing and fixing weatherproof frosted one way vision mpbcdc logo on glass, supplying erecting carbon dioxide fire extinguisher of 4 5 kg capacity, providing and installing premium branded bwd 3 fmrga star hot cold and normal, removing wooden or a c partition including frame work and stack ing the, dismantling the existing light fan bell clock independent plug point wiring, dismantling the existing telephone lan wan tv cables and wires of all sizes, removing doors and windows, dismantling the existing w t fluorescent fitting s v m v m h lamp led fitting, dismantling the existing ceiling fan exhaust fan cabin fan bracket fan complete, plywood test determination of resistance to dry heat determination of moisture, supplying and erecting pvc trunking of size 25 mm, supplying and erecting pvc trunking of size 32 mm, supplying and erecting pvc box trunking of size 50x16 20 mm, supplying and erecting mains, supplying and erecting green colour earthing, supplying 16 amp 3 pin plug top bakelite type of 230 v a c supply, supplying and erecting modular type switch 6a 10a, supplying and erecting modular type switch 16a, supplying and erecting modular type d p switch 32a, supplying and erecting modular type 3 pin 6a multi socket, supplying and erecting modular type 3 pin 6 16a multi socket, supplying and erecting modular type t v socket single outlet, supplying and erecting modular type telephone socket one gang, supplying and erecting modular type buzzer 220 250v, supplying and erecting modular type electronic step regulator for fan, supplying and erecting pvc surface modular switch box, supplying and erecting unbreakable concealed type modular switch box, point wiring for light bell hybrid type, point wiring for light bell exhaust fan, wiring for plug on board, supplying and erecting 2 pair telephone copper cable 0 5 mm dia, supplying and erecting 10 pair 0 5 mm dia jelly filled armoured telephone, supplying and erecting construction of axial copper cable low voltage grade tri shielded rg, supplying erecting and commissioning of mdf box 50x50 pairs made from min 1 5mm, supplying erecting and commissioning of 10 pairs fr junction box, supplying erecting and commissioning of 10 pair module for connection, supplying erecting and commissioning of analogue type epabx of 3 x 8 extension, supplying erecting and commissioning of push button telephone instrument desk, supplying erecting and commissioning of ip telephone instrument, supplying and installing enhanced cat 6 cable, supplying and fixing 1 m utp patch cord of cat 6 type, supplying fixing and configuring 24 ports poe switch, supplying installing testing utp connector, supplying and fixing 24 port patch panel, supplying and fixing 6u wall mount rack, supplying and erecting led panel light max 30 w having crca powder coated, supplying and erecting led strip light 5m length max 45 w ip20 class having, supplying and erecting electronic type cordless call bell erected on t w board, supplying and erecting energy saving ceiling fan 230 v a c 50 cycles 1200 mm, supplying and erecting fan hook box of 10 mm m s round bar bounded to the r c c, supplying and erecting b class g i pipe m s pipe down rod, supplying installing testing and commissioning of split type variable speed, supplying and erecting seamless outside inside smooth dry and clean copper pipe, supplying installing testing and commissioning of single phase input 1 phase, supplying installing testing and commissioning of 3kva capacity online pure, supplying and erecting 12v 7ah 7 5ah smf battery, supplying and erecting 12v 17ah 18ah smf battery, supplying and erecting elastomeric nitrile rubber foam tube type sleeves for, supplying erecting and marking spmcb 6a to 32a c series, supplying erecting and marking spmcb 6a to 32a b series, supplying erecting and marking dpmcb 6 a to 32 a b series, supplying erecting and marking fpmcb 40a to 63a, supplying and erecting triple pole and neutral distribution board sp tp mcbs, supplying and erecting single pole and neutral distribution board, supplying and erecting triple pole and neutral distribution board 3 pole 4 pole, supplying erecting and commissioning of 2 pole rccb 16 25a electromagnetic type, providing and erecting hot dipped galvanised ladder type cable tray, providing earthing, supplying and erecting gi strip of high purity required size used for earthing, supplying and erecting fx pro qled ultra hd 4k smart tv screen including all, supplying erecting 8 tb internal surveillance hdd suitable for sata port of nvr, supplying erecting of high definition 4 5 megapixel ip ir dome camera, supplying installing testing commissioning of 8 10 ch network video recorder, supplying and erecting tiny ai powered ptz webcam fhd 1080p 100 fps 1 2 8, supplying erecting true 65 4k interactive display


Due Date : Jul 30, 2026
T18 Ref No : 16257808
new Tender
Location : umarpada , gujarat
Source : GEM Tenders
new Tender

tender for tools equipment solar technician trade toolkit , equipment , toolkit-equipment , equipment attachment , safety tool , equipment furniture, screw driver insulated /150 mm, screw driver insulated plastic handle 5 mm tip length 200 mm, screw driver electrician 250 mm thin stem insulated handle magnetic point, knife double bladed electrician 100 mm, rule steel 30 cm graduated both english and metric units, hammer cross pein 220 grams / 250 grams / 0.5 lb with handle., electrical symbol and accessories chart, vice hand 50 mm jaw, hacksaw frame fixed type 150 mm, plier round nose, 4/100 mm, guage- wire imperial standard, crimping tool for crimping 16 sq mm to 95 sq.mm, square engineers 6/ 15 cm blade, multi meter (analog) 0 to 1000 m ohms, 2v to 500 v,100 microa to 10a dc and ac, load bank (variable) up to 1.2 kw ( lamp / heater type), earth gi plate 60cm x 60cm x 6mm, earth electrode secondary cu strip 20x5mm, tap set metric 2 to 10 mm (set of 9 pcs) with wrench, hand trolley with 4 wheels 500mm x 750 mm, rooftop mounting structure for 4 x 250 w solar panels mounting practice, with tilt adjustment, protective relays and contactors rack suitable for practice of control circuits using banana plugs and sockets, cables twisted pair nonmetallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable multi-conductor cable coaxial cable direct-buried cable 1 mtr each, bolts, nuts, anchor bolts, washers, screws, other pins, lugs, megger 500 volts cum continuity tester/insulation tester, solar insulation meter, magnetic flux meter 0-500 tesla, tong tester ( 0 - 100 a multi range ), soldering iron exchangable copper tip 65 watt, battery charger 0 - 6 - 9 - 12 - 24 - 48 v, 30amp, solar charge controller with dusk to dawn automatic switching 12v, 10a, solar charge controller with manual switch ( day lighting) 12 v 10 a, solar lantern cfl type, solar lantern assembly sets, solar cell kit, clinometer for angle measurement, level spirit for floor level check, dc table fan 12v, a.c. voltmeter m.i. 0-500 v, voltmeter (0-30v) (table model), voltmeter (0-100v) (table model), ampere meter 0 to 1 amp. (dc), ammeter m.c.0-5 d.c, ammeter m.c. 0-20 a centre zero, ammeter m.c. 0-50 a centre zero, single phase power factor meter, rheostat 0-1 ohms, rheostat 0-10 ohms 5 amp, rheostat 0-25 ohms 1 amp, rheostat 0-300 ohms 5 amp, a.c. energy meter (single phase 10 amp. 240 v), energy meter 3 ph 440 v,15 a, 4 wire, kilo watt (kw) meter analog 0-1.5-3kw, pressure coil rating- 240v/440v, current rating-5a/10a analog, portable type housed in bakelite case, watt meter (digital), phase sequence tester., frequency meter 45 to 55 hz, led lights 12 v dc, led lights 6 v dc, rubber gloves pair, gloves cotton, gum boots, safety goggles/ glass (plastic or fiber), wiring board on stand 3 meters x 1meter with 0.5 meter projection on the top


Tender Value : 0
Due Date : Jul 29, 2026
T18 Ref No : 16257856
new Tender
Location : gandevi , gujarat
Source : GEM Tenders
new Tender

tender for boq 1 tools 4250 multimeter big , working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , soldering iron 10 w , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , ac energy meter single phase 5 amp 230 v , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , seam ripper , finger thimble steel , tailor card scale triangular , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , hammer cross pein 450 grams , neon tester pencile bit type 500 volt , square engineers 200 mm long , rubber gloves 5000 volts , wire stripper 150mm , file round 2nd cut 300 mm , line tester 5oo , screw driver electrician connector 100mm , level spirit 300 mm , dc shunt motor 3 hp 250 v , screw driver 100mm insulated 5 mm , electric iron 750 w 240v , rubber mat 2 meters x 1 meter x 9 mm , soldring iron 60 watt 230v , rechargeable battery 6 v 7ah , electrician helmet , ac celling fan or table fan 68w,230v , motion dectector , dust mask or nose mask regular size , letter and number punch 5mm material alloy steel , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , bottles for solutions 1000ml , bottles for solutions 500ml , conical flask 250ml , conical flask 150ml , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , garment hangers , waste bin big , pattern punch , pattern knotcher , pattern hanging stand , stand for hanging dress , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , hammer cross peen with handle 250 grams , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , phase sequence indicator 3 phase 415 v , smart meter singal phase smart energy meter , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave, multimeter-big with ac current, high voltage test probes, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, soldering iron 10 w power consumption 10 watt bit typefine point soldering tip temperature190 degree celsius is 959 1994, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, ac energy meter single phase 5 amp 230 v is 13779 1999, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, seam ripper, finger thimble steel, tailors card scale triangular, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, hammer cross pein 450 grams is 841 1983, neon tester pencile bit type 500 volt is 5579 1985, square engineers 200 mm long is 2103 1980, rubber gloves 5000 volts is 1899 1977, wire stripper 150mm is 5087 1969, file round 2nd cut 300 mm is 1931 2000, line tester 5oo is 5579 1985, screw driver electrician connector 100mm is 844 1979, level spirit 300 mm is 5706 1993, dc shunt motor 3 hp 250 v is 4722 2001, screw driver 100mm insulated 5 mm is 844 part 2 1979, electric iron 750 w 240v is 366 1991 is 302 2 3 2007, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, soldring iron 60 watt 230v is 959 1994, rechargeable battery 6 v 7ah is 15549, electrician helmet is 2925 1984, ac celling fan/ table fan 68w 230v is 374 2019, motion dectector, dust mask or nose mask regular size, letter and number punch 5mm material alloy steel is 6864 1984, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, bottles for solutions 1000ml borosilicate glass)is 1388, bottles for solutions 500ml borosilicate glass is 1388, conical flask 250ml borosilicate glass is 1381 part 1 2003, conical flask 150ml borosilicate glass is 1381 part 1 2003, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, garment hangers, waste bin big, pattern punch, pattern knotcher, pattern hanging stand, stand for hanging dress t shape, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, hammer cross peen with handle 250 grams is 4953 1989, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, phase sequence indicator 3 phase 415 v, smart meter singal phase smart energy meter is 16444 part 1 2015, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, bourdon tube type gauges of various ranges is 3624 1987


Tender Value : 0
Due Date : Jul 29, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16257414
new Tender
Location : jhansi , uttar pradesh
Source : GEM Tenders
new Tender

corrigendum tender for pantograph isolator , 1801 pg isolator contact arm bearing , 24010405 pg isolator multipoint contact , 2401040507 fix contact connecting pad , 2401040507 pg isolator balancing spring , 2401040507 pg isolator contact arm solid , 2401040507 pg isolator contct arm hollow , 2401040507 pg isolator fixed contact , 2401040507 pg isolator nylon bush , 24010405 420kv pg isolator main contact , 2401040507 420kv pg isolator corona bell , 240104 terminal pad 8 hole single termnl , 2401040507 pg isolator pantogrph housing, 400kv pantograph isolators spares, 420kv 2000amps pantograph isolator 1 nos. equal 1 complete set for 1 phase moving arm assembly scissor assembly + pantogrph housing assembly+ fixed contact assembly + dropper without accessories like earth switch, support insulator,base channel,operating rod,down pipe,operating mechanism box suitable to replace without retrofit existing pantograph isolators siemens/elpro make old design double scissor type, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly moving contact arm bearing 16005z, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly multipoint contact silver plated used in moving contact arm assembly, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly fixed contact connecting pad copper tin plated, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly balancing spring made of spring steel with painted, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly moving contact arm solid lower arm 50x30 al profile extrusion, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly moving contact arm hollow upper arm 50x30 al profile extrusion, siemens make 420kv pantograph isolator old design double scissor moving contact assembly fixed contact copper tube 50 od,34 id, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly nylon bush for moving contact arm, siemens make 420kv pantograph isolator old design double scissor moving contact assembly male copper contact tips for main switch male moving arm assembly main contact copper profile silver plated 25microns, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly corona bell made of aluminium casting, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly terminals pad suitable for 4inchips tube 100x20 copper flat with 18mm dia holes to suit terminal connector and 14 mm dia holes to fit with pg base all holes at distance of 50mm to each other, siemens make 420 kv pantograph isolator old design double scissor moving contact assembly pantograph housing for moving contacts including balancing springs,bearing and lever mechanism made of aluminium casting


Tender Value : 1690000
Due Date : Jul 31, 2026
T18 Ref No : 16257045
new Tender
Location : lucknow , uttar pradesh
Source : GEM Tenders
new Tender

tender for supply installation testing and commissioning water cooler , supply installation testing and commissioning water purifier , s and f 3x2.5 sq mm size copper conductor , supplying and fixing gi box , s and f of 20mm dia medium class pvc conduit , ms stand , cpvc pipe, supply installation testing and commissioning of water cooler and water purifier, supply installation testing and commissioning of self contained 40 l cooling capacity /80 litre storage drinking water capacity water cooler in stainless steel body with min 02 nos tap water outlet complete with all standard accessary etc.suitable for operation on single phase 230v ac supply complete as required. make blue star/voltas/ss ., supply installation testing and commissioning of high flow rate water purifier suitable for working on 230v,50hz ac supply, having following specifications complete etc. as required.a. purification capacity of 200 litres per hour b. water control sensor c. effective 3 stage purification process d. built in safety mechanism e. universal diverter valve f. user friendly continuous water flow dispensing h. ultra compact design make eureka forbes , product gwpdag20010000 ag 200 aquaguard 200 commercial water purifier/ ss make. note mall road 2 nos, kidwai nagar 01 no, krishna nagar 01 no, benajhabar 01 no. kalyanpur 01 no, lajpat nagar 01 no, akbarpur 01 no, total 08 nos., supplying and fixing of 3x2.5 sq mm size of flexible round copper conductor cable on surface/ recess with suitable clamp suitable for work on 230 volt, 50 hz ac supply i/c connection etc as reqd make polycab/havells/finolex, supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required., supplying and fixing of 20mm dia medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., fabricating supplying and fixing of ms stand made out of 32x32x5mm ms angle iron/ 25x5mm ms flat iron approx 1 feet height suitable for installation of above water cooler i/c grouting. painting etc complete as required., pdg water inlet/ outlet arrangement by pdg cpvc pipe of 25mm dia i/c making good the damages etc complete as reqd. as per the site requirement


Tender Value : 688407
Due Date : Aug 04, 2026
T18 Ref No : 16259912
new Tender
Location : bathinda , punjab
Source : GEM Tenders
new Tender

tender for fast moving spare parts ppgi sheet of 0 63 mm thick with trapezoidal shaped , ppgi sheet of size 1070mm by 3650 mm 063 mm thick with trapezoidal shaped , ppgi sheet of size 1070mm by 5180 mm 063 mm thick with trapezoidal shaped , ppgi sheet of size 600mm by 2460mm 0 63 mm thick with trapezoidal shaped , sunshade , inner and outer flashing 0.50mm thick gi steel sheet , pre painted rectangular hollow steel sections of size 66mm by 33mm 36mm thick , pre painted rectangular hollow steel sections of size 100mm by 50mm 4mm thick , self driven power screw of 3mm in dia and 55mm long in built rubber , pre painted steel doors of size 1 50 by 210m , pre painted steel window , s for wind driven turbine air ventilator of 21 dia , fly ash bricks , cement bags , sand , aggregate 40 63mm , aggregate 40mm , aggregate 20mm , led tube rod 4 ft x 20 w , ceiling fan 1200mm sweep complete with electronic dimmer 450w , hook for hanging of ceiling fan , bulk head fitting complete with glass and led light 9 watt , ceiling rose 2 to 3 terminal , switch piano type 5 amps , 5 pin 15 amps switch socket combination with pvc mounting box , 5 pin 5 amps switch socket combination with pvc mounting box , mcb db spn 12 way , mcb dp 32 amps make , miniature circuit breaker mcb 6 amp to 32 amps single pole , pvc switch mounting box 6 x 8 , exhaust fan 450mm with louvers at gable end will be provided , wire pvc insulated cable 1 5sqmm multistranded copper conductor single core , wire pvc insulated cable 2 5sqmm multistranded copper conductor single core , pvc casing capping 20 mm size , pvc casing capping 25 mm size , 20mm dia pvc conduit pipe med grade , pvc tee 20mm casing capping , pvc tee 25mm casing capping , pvc tee 20mm conduit , pvc bend 20mm casing capping , pvc bend 25mm casing capping , pvc bend 20mm conduit , pvc socket 20mm conduit , pvc junction box 3 way 20mm , pvc junction box 4way 20mm , pvc box of size 4x4 for mounting ceiling rose pendent holder , conduit clips pkt of 100 nos , ms distribution box 3 phase 32 amp tpn with bus bar , screw steel full threaded 25mm pkt of 100 nos , screw steel full threaded 32 mm pkt of 100 nos , screw steel full threaded 40mm pkt of 100 nos , feeder pillar box , cable xlpe insulated pvc sheathed heavy duty armoured 25 sqmm, ppgi sheet of 0 63 mm thick with trapezoidal shaped, ppgi sheet of size 1070mm by 3650 mm 063 mm thick with trapezoidal shaped, ppgi sheet of size 1070mm by 5180 mm 063 mm thick with trapezoidal shaped, ppgi sheet of size 600mm by 2460mm 0 63 mm thick with trapezoidal shaped, sunshade, inner and outer flashing 0.50mm thick gi steel sheet, pre painted rectangular hollow steel sections of size 66mm by 33mm 36mm thick, pre painted rectangular hollow steel sections of size 100mm by 50mm 4mm thick, self driven power screw of 3mm in dia and 55mm long in built rubber, pre painted steel doors of size 1 50 by 210m, pre painted steel window, s for wind driven turbine air ventilator of 21 dia, fly ash bricks, cement bags, sand, aggregate 40 63mm, aggregate 40mm, aggregate 20mm, led tube rod 4 ft x 20 w, ceiling fan 1200mm sweep complete with electronic dimmer 450w, hook for hanging of ceiling fan, bulk head fitting complete with glass and led light 9 watt, ceiling rose 2 to 3 terminal, switch piano type 5 amps, 5 pin 15 amps switch socket combination with pvc mounting box, 5 pin 5 amps switch socket combination with pvc mounting box, mcb db spn 12 way, mcb dp 32 amps make, miniature circuit breaker mcb 6 amp to 32 amps single pole, pvc switch mounting box 6 x 8, exhaust fan 450mm with louvers at gable end will be provided, wire pvc insulated cable 1 5sqmm multistranded copper conductor single core, wire pvc insulated cable 2 5sqmm multistranded copper conductor single core, pvc casing capping 20 mm size, pvc casing capping 25 mm size, 20mm dia pvc conduit pipe med grade, pvc tee 20mm casing capping, pvc tee 25mm casing capping, pvc tee 20mm conduit, pvc bend 20mm casing capping, pvc bend 25mm casing capping, pvc bend 20mm conduit, pvc socket 20mm conduit, pvc junction box 3 way 20mm, pvc junction box 4way 20mm, pvc box of size 4x4 for mounting ceiling rose pendent holder, conduit clips pkt of 100 nos, ms distribution box 3 phase 32 amp tpn with bus bar, screw steel full threaded 25mm pkt of 100 nos, screw steel full threaded 32 mm pkt of 100 nos, screw steel full threaded 40mm pkt of 100 nos, feeder pillar box, cable xlpe insulated pvc sheathed heavy duty armoured 25 sqmm


Agency / Dept : indian army
Tender Value : 0
Due Date : Jul 28, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16259084
new Tender
Location : durgapur , west bengal
Source : GEM Tenders
new Tender

tender for access control , push switch , ms box , ofc cable , 1200lbs em lock , cat6 , 4port poe , sfp , 6port liu , 12port liu , sm duplex , 4u indoor rack , power cable , hdpe pipe , pvc pipe , pvc box , power cabling laying , installation, testing, comm , 8port poe , 24port liu , 6u indoor rack , 600lbs em lock , sfp port switch, access control, supply of fingerprint and mifare card based single door access controller, no touch push switch, outdoor ms box, 6 core ofc cable, 1200lbs em lock with l & z bracket, cat6 utp cable, 4port poe + 2sfp port industrial switch, sfp transreceiver, 6port liu, 12port liu, sm duplex fiber patch cord, 4u indoor rack, 3core 1.5mm power cable, 25mm hdpe pipe, 25mm pvc pipe with accessories, pvc box 4/4, ofc, cat6 & power cabling laying with hdpe pipe and pvc conduit pipe including clamping accessories, installation, testing, commissioning, enrollment, and integration of each device complete with all required accessories, connectivity, and interfacing with the existing cosec centralized time attendance & access control server and software without changing any hardware, application and software license. the scope shall include configuration, system testing, user enrollment, commissioning, and comprehensive onsite warranty maintenance support within the jurisdiction of powergrid er-ii covering west bengal and sikkim., 8port poe + 4sfp port industrial switch, 24port liu, 6u indoor rack, outdoor pvc box 4/6, 600lbs em lock with l & z bracket, 12port 10g sfp port switch


Due Date : Aug 14, 2026
Published By

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Single Switch. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Single Switch sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Single Switch Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Single Switch, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Single Switch Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Single Switch Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Single Switch.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Single Switch depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Single Switch Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Single Switch bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Single Switch. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Single Switch, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Single Switch, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Single Switch?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Single Switch tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Single Switch?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Single Switch, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Single Switch is declared L1 and is generally awarded the contract