sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

5Latest Safety valve scrap Tenders List

Latest Safety valve scrap Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Safety valve scrap tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Safety valve scrap tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Safety valve scrap Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Safety valve scrap tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Safety valve scrap Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Safety valve scrap Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Safety valve scrap Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Safety valve scrap tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Safety valve scrap Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Safety valve scrap sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Safety valve scrap tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Safety valve scrap tenders.

Is EMD mandatory for all Safety valve scrap tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Safety valve scrap work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Safety valve scrap tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Safety valve scrap Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16113340
Location : ghatkesar , telangana
auction or scrap of lot no - 81 lot name - crimped connecting wire product type - miscellaneous category - miscellaneous items - 0.0 crimped connecting wire | lot no - 82 lot name - b connector wiring product type - miscellaneous category - miscellaneous items - 0.0 b connector wiring | lot no - 83 lot name - actuators assy product type - miscellaneous category - miscellaneous items - 0.0 actuators assy | lot no - 84 lot name - nozzel reataing nut product type - miscellaneous category - miscellaneous items - 0.0 nozzel reataing nut | lot no - 85 lot name - over flow valve product type - miscellaneous category - miscellaneous items - 0.0 over flow valve | lot no - 86 lot name - bush product type - miscellaneous category - miscellaneous items - 0.0 bush | lot no - 87 lot name - tube cpr water out let product type - miscellaneous category - miscellaneous items - 0.0 tube cpr water out let | lot no - 88 lot name - control spool - fie product type - miscellaneous category - miscellaneous items - 0.0 control spool - fie | lot no - 89 lot name - tube cpr water inlet product type - miscellaneous category - miscellaneous items - 0.0 tube cpr water inlet | lot no - 90 lot name - polyamide btake pipe repairkit product type - miscellaneous category - miscellaneous items - 0.0 polyamide btake pipe repairkit | lot no - 91 lot name - oil seal rear hub outer product type - miscellaneous category - miscellaneous items - 0.0 oil seal rear hub outer | lot no - 92 lot name - gas kit product type - miscellaneous category - miscellaneous items - 0.0 gas kit | lot no - 93 lot name - fixing srew for alternator product type - miscellaneous category - miscellaneous items - 0.0 fixing srew for alternator | lot no - 94 lot name - head light assy r h - jnnurm tata /lf / a product type - miscellaneous category - miscellaneous items - 0.0 head light assy r h - jnnurm tata /lf / a | lot no - 95 lot name - head light assy r h with p 45t holder product type - miscellaneous category - miscellaneous items - 0.0 head light assy r h with p 45t holder | lot no - 96 lot name - assy head lamp l h lumax lf product type - miscellaneous category - miscellaneous items - 0.0 assy head lamp l h lumax lf | lot no - 97 lot name - zfgb selector housing product type - miscellaneous category - miscellaneous items - 0.0 zfgb . selector housing | lot no - 98 lot name - gb2 clutch withdrawl sleeve cl -3 f product type - miscellaneous category - miscellaneous items - 0.0 gb2 clutch withdrawl sleeve cl -3 f | lot no - 99 lot name - a c pistion ring r/ kit tata / slf product type - miscellaneous category - miscellaneous items - 0.0 a c pistion ring r/ kit tata / slf | lot no - 100 lot name - voss connector kit for fuel line product type - miscellaneous category - miscellaneous items - 0.0 voss connector kit for fuel line | lot no - 101 lot name - belt - v - ribbed alternator - tml / lf / a c product type - miscellaneous category - miscellaneous items - 0.0 belt - v - ribbed alternator - tml / lf / a c | lot no - 102 lot name - belt engine crank to idler bx 60- tata product type - miscellaneous category - miscellaneous items - 0.0 belt ( engine crank to idler ) bx 60- tata | lot no - 103 lot name - v belt cogged 1280 lnth for fan tata product type - miscellaneous category - miscellaneous items - 0.0 v belt cogged 1280 lnth for fan tata | lot no - 104 lot name - belt - double baneed 2 bx38 tata / lf product type - miscellaneous category - miscellaneous items - 0.0 belt - double baneed 2 bx38 tata / lf | lot no - 105 lot name - belt- double baneed 2 bx600000 tata product type - miscellaneous category - miscellaneous items - 0.0 belt- double baneed 2 bx600000 tata | lot no - 106 lot name - support plate - fie product type - miscellaneous category - miscellaneous items - 0.0 support plate - fie | lot no - 107 lot name - regulator assy alternator product type - miscellaneous category - miscellaneous items - 0.0 regulator assy alternator | lot no - 108 lot name - rotor assy tvs alternator product type - miscellaneous category - miscellaneous items - 0.0 rotor assy ( tvs alternator ) | lot no - 109 lot name - gb 2 thrust washer on shaft product type - miscellaneous category - miscellaneous items - 0.0 gb 2 thrust washer on shaft | lot no - 110 lot name - oil seal hub - inner - re - doublelip tata product type - miscellaneous category - miscellaneous items - 0.0 oil seal hub - inner - re - doublelip tata | lot no - 111 lot name - front- br liner - aal std w/ rivits tata product type - miscellaneous category - miscellaneous items - 0.0 front- br . liner - aal.std w/ rivits tata | lot no - 112 lot name - assy cable acclerator lf non a c product type - miscellaneous category - miscellaneous items - 0.0 assy cable acclerator lf non a c | lot no - 113 lot name - fc kit tata lf ac/nac product type - miscellaneous category - miscellaneous items - 0.0 fc kit tata lf ac/nac | lot no - 114 lot name - fuel filter -it 18000 kms -tml / lf - a product type - miscellaneous category - miscellaneous items - 0.0 fuel filter -it ( 18000 kms ) - tml / lf - a | lot no - 115 lot name - air filter primary - 72000 kms - tml/lf/a product type - miscellaneous category - miscellaneous items - 0.0 air filter primary -72000 kms -tml/lf/a | lot no - 116 lot name - air filter 2nd 216000 kms -tml/lf - a c product type - miscellaneous category - miscellaneous items - 0.0 air filter 2nd (216000 kms ) - tml/lf - a c | lot no - 117 lot name - lube oil filter spinon tata mini product type - miscellaneous category - miscellaneous items - 0.0 lube oil filter ( spinon ) tata mini | lot no - 118 lot name - air filter eliment outer tata mini product type - miscellaneous category - miscellaneous items - 0.0 air filter eliment (outer) (tata mini) | lot no - 119 lot name - safety cartridge a/fiter inner tata product type - miscellaneous category - miscellaneous items - 0.0 safety cartridge (a/fiter inner ) tata | lot no - 120 lot name - rectangular oil seal tata /slf/ lf / a product type - miscellaneous category - miscellaneous items - 0.0 rectangular oil seal tata /slf/ lf / a
Agency / Dept :
telangana state road transport corporation TSRTC
Due Date :
Jul 18, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15982862
Location : bagpat , uttar pradesh
Source : GEM Tenders
tender for rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item a , neoprine rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item b , neoprine rubber sheet for right angle valve of juice heater vapour bleading line size640 510 25mm as per drg no 2k 6 26r , neoprine rubber sheet for right angle exhaust valve of s k size 845 750 25mm as per drg no 2k 9 42 , neoprine rubber sheet for discharge valve of pan size 700mm dia size 750 600 20mm as per drg no 19 11 17r1 , neoprine rubber sheet for right angle exhaust valve of old s k catcher 950 sq mtr size 860 750 30mm as per drg no 2k2 08 16 , neoprine rubber sheet for right angle glove valve of 1500 sq mtr quad body size 550 442 20mm as per drg no 21 07 07n set , neoprine rubber sheet for juice heater right angle valve size 750 590 25mm , neoprine rubber sheet for glove valve size 280 187 13mm as per drg no 19 11 17r1 , neoprine rubber sheet for spring loaded shafty valve of 2200 quad body size 229 76 13mm as per drg no 19 11 18r1 , neoprine rubber sheet for right angle valve of 950 sq mtr exhaust valve size840 845 690 25mm , neoprine rubber strip for square section juice heater size 18 15mm , neoprine rubber strip for square section juice heater as per drg no 21 09 11d s , neoprine rubber sheet for 600mm dia discharge valve of pan size 654 490 25mm as per drg no 19 11 17r1 item no 1 , neoprine rubber sheet for right angle exhaust valve size 800 705 30mm as per drg no 96 07 02 , neoprine rubber sheet for main hole of 60 ton size 575 450 12mm as per drg no 91 1 04 , neoprine rubber sheet for main hole of 60 ton pan size 525 450 12mm as per drg no 96 07 02 , neoprine rubber sheet for main hole of 80 ton pan 620 500 15mm as per drg no 2k2 7 11 , neoprine rubber sheet for glove valve of 1500 sq mtr quad body size 650 525 20mm as per drg no 19 11 17r , neoprine rubber sheet outlet vapour glove valve 2000 mtr sq size 1040 900 25mm as per drg. no 19 11 17r , neoprine rubber sheet for right angle vapour valve of 1500 sq mtr size 600 450 20mm as per drg no 19 11 18r1 , neoprine rubber sheet spring loaded safety valve size 171 63 13mm as per drg no 19 11 18r1 , neoprine rubber strip for nk1503 c f m c nhec make as per drg no 28 08 22 , rubber belt guide bush for sugar belt conveyor as per drg no 7k 9 11 , rubber strip of mud scrapper for door size762 l 127 w 20mm , neoprine rubber sheet for 800 mtr sq quad main hole size 615 535 10mm as per drg no 22 07 02nset , neoprine rubber sheet for 800 mtr sq quad main hole size 625 545 10mm , neoprine rubber sheet for 800 mtr sq quad main hole size 630 550 10mm as per drg 22 07 02n set , anti vibrating pad 1503 c f machine size150mm od 55mm thick , rubber joint sheet size 3mm , rubber joint sheet size 1 5mm , mill haudraulic bucket with ring as per drg no 2k 8 39 , rubber joint sheet size 6mm, rubber goods, neoprine u type rubber coupling for nhec make cf machine nk 1503, canvas flate belt 8w 16mm t 8 ply, rubber seat for double beat valve for juice heater clear juice heater size300 78 10mm as per drg no 2k 626r1, rubber seat for double beat valve for juice heater clear juice heater size290 25 20mm as per drg no 2k 6 26r, neoprine rubber sheet for 80 ton pan size 635 510 25mm as per drg no 96 07 03r, neoprine rubber sheet for 60 ton pan size 550 415 20mm as per drg no 96 07 03, neoprine rubber sheet for 60 ton pan size 540 420 20mm as per drg no 2k 6 17r, neoprine rubber sheet for juice heater right angle valve 400 270 25mm as per drg no 2k 6 26r, neoprine rubber sheet for 1100 sq mtr heating surface area quad body main hole size 580 500 16mm as per drg no 06 06 06, neoprine rubber sheet for 900 mtr sq heating surface area quad body main hole size610 525 10mm as per drg no 06 06 06, neoprine rubber sheet for new s k main hole size 550 450 10mm as per drg no 06 06 06, neoprine rubber sheet for quad main hole size 546 440 12mm as per drg no 89 5 17, rubber mud seal for door calarifire size27 23 21 as per drg no 2k 7 29, neoprine rubber sheet for right angle valve of main exhaust steam header line size1143 1000 30mm as per drg no 19 11 18r1, neoprine rubber sheet for right angle exhaust valve of 2000 mtr sq s k size700mm od 540mm id 20mm as per drg no 21 07 07n set, neoprine rubber sheet for right angle valve exhaust 2200 mtr sq size 800 640 20mm as per drg no 21 07 07n set, neoprine rubber sheet for right angle exhaust valve and vapour valve 2200 mtr sq ist and iind body size 750 592 20mm as per drg no 21 07 07n set, neoprine rubber sheet for right angle valve vapour line size 862 750 25mm as per drg no 96 07 02, neoprine rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item a, neoprine rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item b, neoprine rubber sheet for right angle valve of juice heater vapour bleading line size640 510 25mm as per drg no 2k 6 26r, neoprine rubber sheet for right angle exhaust valve of s k size 845 750 25mm as per drg no 2k 9 42, neoprine rubber sheet for discharge valve of pan size 700mm dia size 750 600 20mm as per drg no 19 11 17r1, neoprine rubber sheet for right angle exhaust valve of old s k catcher 950 sq mtr size 860 750 30mm as per drg no 2k2 08 16, neoprine rubber sheet for right angle glove valve of 1500 sq mtr quad body size 550 442 20mm as per drg no 21 07 07n set, neoprine rubber sheet for juice heater right angle valve size 750 590 25mm, neoprine rubber sheet for glove valve size 280 187 13mm as per drg no 19 11 17r1, neoprine rubber sheet for spring loaded shafty valve of 2200 quad body size 229 76 13mm as per drg no 19 11 18r1, neoprine rubber sheet for right angle valve of 950 sq mtr exhaust valve size840 845 690 25mm, neoprine rubber strip for square section juice heater size 18 15mm, neoprine rubber strip for square section juice heater as per drg no 21 09 11d s, neoprine rubber sheet for 600mm dia discharge valve of pan size 654 490 25mm as per drg no 19 11 17r1 item no 1, neoprine rubber sheet for right angle exhaust valve size 800 705 30mm as per drg no 96 07 02, neoprine rubber sheet for main hole of 60 ton size 575 450 12mm as per drg no 91 1 04, neoprine rubber sheet for main hole of 60 ton pan size 525 450 12mm as per drg no 96 07 02, neoprine rubber sheet for main hole of 80 ton pan 620 500 15mm as per drg no 2k2 7 11, neoprine rubber sheet for glove valve of 1500 sq mtr quad body size 650 525 20mm as per drg no 19 11 17r, neoprine rubber sheet outlet vapour glove valve 2000 mtr sq size 1040 900 25mm as per drg. no 19 11 17r, neoprine rubber sheet for right angle vapour valve of 1500 sq mtr size 600 450 20mm as per drg no 19 11 18r1, neoprine rubber sheet spring loaded safety valve size 171 63 13mm as per drg no 19 11 18r1, neoprine rubber strip for nk1503 c f m c nhec make as per drg no 28 08 22, rubber belt guide bush for sugar belt conveyor as per drg no 7k 9 11, rubber strip of mud scrapper for door size762 l 127 w 20mm, neoprine rubber sheet for 800 mtr sq quad main hole size 615 535 10mm as per drg no 22 07 02nset, neoprine rubber sheet for 800 mtr sq quad main hole size 625 545 10mm, neoprine rubber sheet for 800 mtr sq quad main hole size 630 550 10mm as per drg 22 07 02n set, anti vibrating pad 1503 c f machine size150mm od 55mm thick, rubber joint sheet size 3mm, rubber joint sheet size 1 5mm, mill haudraulic bucket with ring as per drg no 2k 8 39, rubber joint sheet size 6mm
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 10, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16076821
Location : palia , uttar pradesh
Source : GEM Tenders
tender for rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item a , neoprine rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item b , neoprine rubber sheet for right angle valve of juice heater vapour bleading line size640 510 25mm as per drg no 2k 6 26r , neoprine rubber sheet for right angle exhaust valve of s k size 845 750 25mm as per drg no 2k 9 42 , neoprine rubber sheet for discharge valve of pan size 700mm dia size 750 600 20mm as per drg no 19 11 17r1 , neoprine rubber sheet for right angle exhaust valve of old s k catcher 950 sq mtr size 860 750 30mm as per drg no 2k2 08 16 , neoprine rubber sheet for right angle glove valve of 1500 sq mtr quad body size 550 442 20mm as per drg no 21 07 07n set , neoprine rubber sheet for juice heater right angle valve size 750 590 25mm , neoprine rubber sheet for glove valve size 280 187 13mm as per drg no 19 11 17r1 , neoprine rubber sheet for spring loaded shafty valve of 2200 quad body size 229 76 13mm as per drg no 19 11 18r1 , neoprine rubber sheet for right angle valve of 950 sq mtr exhaust valve size840 845 690 25mm , neoprine rubber strip for square section juice heater size 18 15mm , neoprine rubber strip for square section juice heater as per drg no 21 09 11d s , neoprine rubber sheet for 600mm dia discharge valve of pan size 654 490 25mm as per drg no 19 11 17r1 item no 1 , neoprine rubber sheet for right angle exhaust valve size 800 705 30mm as per drg no 96 07 02 , neoprine rubber sheet for main hole of 60 ton size 575 450 12mm as per drg no 91 1 04 , neoprine rubber sheet for main hole of 60 ton pan size 525 450 12mm as per drg no 96 07 02 , neoprine rubber sheet for main hole of 80 ton pan 620 500 15mm as per drg no 2k2 7 11 , neoprine rubber sheet for glove valve of 1500 sq mtr quad body size 650 525 20mm as per drg no 19 11 17r , neoprine rubber sheet outlet vapour glove valve 2000 mtr sq size 1040 900 25mm as per drg. no 19 11 17r , neoprine rubber sheet for right angle vapour valve of 1500 sq mtr size 600 450 20mm as per drg no 19 11 18r1 , neoprine rubber sheet spring loaded safety valve size 171 63 13mm as per drg no 19 11 18r1 , neoprine rubber strip for nk1503 c f m c nhec make as per drg no 28 08 22 , rubber belt guide bush for sugar belt conveyor as per drg no 7k 9 11 , rubber strip of mud scrapper for door size762 l 127 w 20mm , neoprine rubber sheet for 800 mtr sq quad main hole size 615 535 10mm as per drg no 22 07 02nset , neoprine rubber sheet for 800 mtr sq quad main hole size 625 545 10mm , neoprine rubber sheet for 800 mtr sq quad main hole size 630 550 10mm as per drg 22 07 02n set , anti vibrating pad 1503 c f machine size150mm od 55mm thick , rubber joint sheet size 3mm , rubber joint sheet size 1 5mm , mill haudraulic bucket with ring as per drg no 2k 8 39 , rubber joint sheet size 6mm, rubber goods, neoprine u type rubber coupling for nhec make cf machine nk 1503, canvas flate belt 8w 16mm t 8 ply, rubber seat for double beat valve for juice heater clear juice heater size300 78 10mm as per drg no 2k 626r1, rubber seat for double beat valve for juice heater clear juice heater size290 25 20mm as per drg no 2k 6 26r, neoprine rubber sheet for 80 ton pan size 635 510 25mm as per drg no 96 07 03r, neoprine rubber sheet for 60 ton pan size 550 415 20mm as per drg no 96 07 03, neoprine rubber sheet for 60 ton pan size 540 420 20mm as per drg no 2k 6 17r, neoprine rubber sheet for juice heater right angle valve 400 270 25mm as per drg no 2k 6 26r, neoprine rubber sheet for 1100 sq mtr heating surface area quad body main hole size 580 500 16mm as per drg no 06 06 06, neoprine rubber sheet for 900 mtr sq heating surface area quad body main hole size610 525 10mm as per drg no 06 06 06, neoprine rubber sheet for new s k main hole size 550 450 10mm as per drg no 06 06 06, neoprine rubber sheet for quad main hole size 546 440 12mm as per drg no 89 5 17, rubber mud seal for door calarifire size27 23 21 as per drg no 2k 7 29, neoprine rubber sheet for right angle valve of main exhaust steam header line size1143 1000 30mm as per drg no 19 11 18r1, neoprine rubber sheet for right angle exhaust valve of 2000 mtr sq s k size700mm od 540mm id 20mm as per drg no 21 07 07n set, neoprine rubber sheet for right angle valve exhaust 2200 mtr sq size 800 640 20mm as per drg no 21 07 07n set, neoprine rubber sheet for right angle exhaust valve and vapour valve 2200 mtr sq ist and iind body size 750 592 20mm as per drg no 21 07 07n set, neoprine rubber sheet for right angle valve vapour line size 862 750 25mm as per drg no 96 07 02, neoprine rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item a, neoprine rubber sheet for injection pump popup valve dia 750mm as per drg no 17 08 10 item b, neoprine rubber sheet for right angle valve of juice heater vapour bleading line size640 510 25mm as per drg no 2k 6 26r, neoprine rubber sheet for right angle exhaust valve of s k size 845 750 25mm as per drg no 2k 9 42, neoprine rubber sheet for discharge valve of pan size 700mm dia size 750 600 20mm as per drg no 19 11 17r1, neoprine rubber sheet for right angle exhaust valve of old s k catcher 950 sq mtr size 860 750 30mm as per drg no 2k2 08 16, neoprine rubber sheet for right angle glove valve of 1500 sq mtr quad body size 550 442 20mm as per drg no 21 07 07n set, neoprine rubber sheet for juice heater right angle valve size 750 590 25mm, neoprine rubber sheet for glove valve size 280 187 13mm as per drg no 19 11 17r1, neoprine rubber sheet for spring loaded shafty valve of 2200 quad body size 229 76 13mm as per drg no 19 11 18r1, neoprine rubber sheet for right angle valve of 950 sq mtr exhaust valve size840 845 690 25mm, neoprine rubber strip for square section juice heater size 18 15mm, neoprine rubber strip for square section juice heater as per drg no 21 09 11d s, neoprine rubber sheet for 600mm dia discharge valve of pan size 654 490 25mm as per drg no 19 11 17r1 item no 1, neoprine rubber sheet for right angle exhaust valve size 800 705 30mm as per drg no 96 07 02, neoprine rubber sheet for main hole of 60 ton size 575 450 12mm as per drg no 91 1 04, neoprine rubber sheet for main hole of 60 ton pan size 525 450 12mm as per drg no 96 07 02, neoprine rubber sheet for main hole of 80 ton pan 620 500 15mm as per drg no 2k2 7 11, neoprine rubber sheet for glove valve of 1500 sq mtr quad body size 650 525 20mm as per drg no 19 11 17r, neoprine rubber sheet outlet vapour glove valve 2000 mtr sq size 1040 900 25mm as per drg. no 19 11 17r, neoprine rubber sheet for right angle vapour valve of 1500 sq mtr size 600 450 20mm as per drg no 19 11 18r1, neoprine rubber sheet spring loaded safety valve size 171 63 13mm as per drg no 19 11 18r1, neoprine rubber strip for nk1503 c f m c nhec make as per drg no 28 08 22, rubber belt guide bush for sugar belt conveyor as per drg no 7k 9 11, rubber strip of mud scrapper for door size762 l 127 w 20mm, neoprine rubber sheet for 800 mtr sq quad main hole size 615 535 10mm as per drg no 22 07 02nset, neoprine rubber sheet for 800 mtr sq quad main hole size 625 545 10mm, neoprine rubber sheet for 800 mtr sq quad main hole size 630 550 10mm as per drg 22 07 02n set, anti vibrating pad 1503 c f machine size150mm od 55mm thick, rubber joint sheet size 3mm, rubber joint sheet size 1 5mm, mill haudraulic bucket with ring as per drg no 2k 8 39, rubber joint sheet size 6mm
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 16, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16042253
Location : nanauta , uttar pradesh
Source : GEM Tenders
tender for mill house item no 1 , mill house item no 2 , mill house item no 3 , mill house item no 4 , mill house item no 5 , mill house item no 6 , mill house item no 7 , mill house item no 8 , mill house item no 9 , mill house item no 10 , mill house item no 11 , mill house item no 12 , mill house item no 13 , mill house item no 14 , mill house item no 15 , mill house item no 16 , mill house item no 17 , mill house item no 18 , mill house item no 19 , mill house item no 20 , mill house item no 21 , mill house item no 22 , mill house item no 23 , mill house item no 24 , mill house item no 25 , mill house item no 26 , mill house item no 27 , mill house item no 28 , mill house item no 29 , mill house item no 30 , mill house item no 31 , mill house item no 32 , mill house item no 33 , mill house item no 34 , mill house item no 35 , mill house item no 36 , mill house item no 37 , mill house item no 38 , mill house item no 39 , mill house item no 40 , mill house item no 41 , mill house item no 42 , mill house item no 43 , boiler house item no 1 , boiler house item no 2 , boiler house item no 3 , boiler house item no 4 , boiler house item no 5 , boiler house item no 6 , boiler house item no 7 , boiler house item no 8 , boiler house item no 9 , boiler house item no 10 , boiler house item no 11 , boiler house item no 12 , boiler house item no 13 , boiler house item no 14 , boiler house item no 15 , boiler house item no 16 , boiler house item no 17 , boiler house item no 18 , boiler house item no 19 , boiler house item no 20 , boiler house item no 21 , boiler house item no 22 , boiler house item no 23 , boiler house item no 24 , boiler house item no 25 , boiler house item no 26 , boiler house item no 27 , boiler house item no 28 , boiler house item no 29 , boiler house item no 30 , boiler house item no 31 , boiler house item no 32 , boiler house item no 33 , boiler house item no 34 , boiler house item no 35 , boiler house item no 36 , pan calandria work , spray item no 1 , vaccuum crystalizer , schedule work 1 , schedule work 2 , schedule work 3 , schedule work 4 , schedule work 5 , schedule work 6 , schedule work 7 , schedule work 8 , schedule work 9 , schedule work 10 , schedule work 11 , schedule work 12 , schedule work 13 , schedule work 14 , schedule work 15 , schedule work 16 , schedule work 17 , schedule work 18 , schedule work 19 , schedule work 20 , schedule work 21 , schedule work 22 , schedule work 23 , schedule work 24 , schedule work 25 , schedule work 26 , schedule work 27 , schedule work 28 , schedule work 29 , schedule work 30 , schedule work 31 , schedule work 32 , schedule work 33 , schedule work 34 , schedule work 35 , schedule work 36 , schedule work 37 , schedule work 38 , schedule work 39 , schedule work 40 , schedule work 41 , schedule work 42 , schedule work 43 , schedule work 44 , schedule work 45, boiler febrication, cutting of cheveran pineapple grooves on mill rollers, replacement of weak or worn out runners of cane carrier src and irc and cane unloader power supply angle, welding of oval hole or enlarged holes of attachments of block type chain links and redrilling as per template or profile, replacement of weak or worn out attachment of block type chain links along with drilling as per template orprofile and welding, replacement of worn-out tail end boot of src and irc, fabrication and fitting of new juice rings for mill roller as per sample, dismantling of worn out portion of square bar of long travel and cross travel there after grinding of base plate and fitting leveling and alignment of new square bar of cane unloader, welding on wear out mill and grpf crown pinion teeth there after grinding of teeth to make it as per profile, dismantling fabrication and erection of weak or worn out mill juice or water imbibitions box of compound imbibitions system, fabrication and erection of mill roller feed and discharge bearing cover from 10 mm or 8mm plate, fabrication and erection of runner supporting box below runner at irc src cane carrier and auxiliary cane carrier, replacement of worn out deflector plate and top plate of cane chopper or cane leveller or fibrizer by m s plate or ss lining plates along with strengthening, dismantling fabrication and erection of worn out or weak cane carrier chain side angle, dismantling fabrication and erection of return cane carrier chain supporting runner chain guide, dismantling fabrication and erection of worn out ms plate of truck tripler src irc and cane carrier side plate, sprocket teeth repairing and strengthening with extra support of irc src elevator new and old mbc rbc, repair and hard facing of auxiliary cane carrier kicker or pusher, welding and hard facing on wear out under feed roller teeth shell of roller and enlarging the length of roller as per standerd, replacement of worn-out perforated juice plate of screw conveyor at mill, repair and hard facing on cane leveller or chopper hubs, lever bracket of underfeed roller scrapper to be changed and to be fitted as directed, replacement and hard facing of worn out partition plate of anvil plate with 25 mm plate, hot forging of enlarged or eggshape holes of cane carrier links to make them as per existing, fabrication of 10 inch size non return valve from m s plate with fitting and leak proof trial, fabrication and erection of rotary screen ms conical juice tank, repair of cane carrier slates such as worn-out side wear plates holes and other to be done, fabrication and hard facing of under feed roller scrapper as per instructions to be done, welding on wear out teeth of cane carrier s r c and i r c sprockets to be done and teeth to be made as per profile after grinding process, ms ring to be fitted on worn-out both side of bagasse pusher at fibrizer and hard facing to be done on square bars fitted, welding of grpf scrapper teeth to make them as per profile after hard facing and grinding, repair and hard facing of cane unloader grab finger, underfeed roller pinion teeth builtup & hard facing, repairing of ms guard cover mill rollers crown pinion, dismantling and fitting of bagacillo screen as per instruction, dismantling of sprockets of src irc elevator etc on drive or trial end shaft and fitting the sameon new shaft &successful trail, rotary screen worn out support box replacement and accordingly strengthening its platform with successful trail, ss plates lining on the truff of irc or src and mills head stock grpf pressure chute nose plates and grinding of surface, fabrication and fitting of new fish plates of the grpf pressure chute and also fitting of profile building of the bottom and top new or old scrappers of the same along with ss linner of 5mm thick plate as per old sample, build up of oval enlarged pin holes of links of block type chain and drilling of holes as per pitch suitable to our pin, patching or repairing of weak worn out portion of cane unloader no 3 cabin by new old ms plate size 6mm along with proper strengthening, fabrication and erection of new src or irc racks as existing design sample, repairing of old src irc racks, repairing and hard facing of fibrizer hammer shank, dismantling of wornout burnt c i feeding chute of 20 ton boiler and fitting of new ci mouth-piece chute of bagasse feeder, dismantling fabrication and fitting of complete new casing of id fan with cone of 20 tph boiler, dismantling fabrication and fitting of complete new casing of id fan with cone of 30 tph boiler, fabrication and erection of weak portion of runner supporting box below the chain runner at old mbc new mbc cross carrier1,2,3 or bagasse elevator, dismantling of wornout burnt c i feeding chute of 40 ton boiler and fitting of new ci mouth-piece chute of bagasse feeder, replacement of worn out orweak portion of bottom trough and side plate of old new main bagasse carrier bagasse elevator cross carriers rbc by old new ms plates, replacement of worn-out ducting dampers of i d or fd fan economizer airheater inlet and outlet dampers with levers and bushes, replacement of worn-out weak portion of ducting of flue gas at different places with new old ms plate, fabrication and fitting of bagasse ash chute for new and old boilers with new old ms plate, repairing of wet scrubber shell demister of the 20 30 and 40 tons boiler by new or old ms plate or flat, fabrication and fitting of bagasse sliding gate for different bagasse carriers with successful trail, fabrication and erection of the bagasse cillo impeller with satisfactory trial as per old sample as directed, dismantling of boiler side wall front wall sealing plate economizer casing for replacement of boiler tubes dismantled old plates to be fitted with minor repair or patching after replacement of boiler tubes, replacement reversing of weak worn out runners of new mbc old mbc bagasse elevator cross carriers and rbc etc, repairing of wear out drive non drive end sprocket teeth by welding and grinding to make profile as per template of all bagasse carrier chains etc, repair of worn out weak boiler fd id fan casing along with successful trial by old new ms plate, replacement of worn out bagasse blower casing at bagasse elevator as per sample or as directed, complete hard facing of id fan impeller of 20 30 40 ton boilers, dismantling fabrication and erection of new old boiler i d fan expansion joint, dis cleaning repair and fitting of 20 30 and 40 ton boilers internal fitting, replacement of worn out hanging roof and arch structure of beam or channel size- 4 inch 5 inch of boiler no 1 and 2 of furnace and detrick arch, fabrication of bagasse feeding jantra of tractor, fabrication and fitting of worn out weak bagasse chute at belt conveyor, repairing of grate bars of 30 or 40 ton boilers, replacement of worn out teeth of bagasse feeder rotating drum of boiler no-3, 4 and 5 with satisfactory trial, dismantling fabrication and erection of id fan blade with base plate ribs and suction cone (a) 30 ton boiler, dismantling fabrication and erection of id fan blade with base plate ribs and suction cone (a) 40 ton boiler, fabrication and fitting of worn out chain supporting guide of new mbc old mbc bagasse elevator cross carrier and rbc etc, dismantling fabrication and fitting of worn out portion of old feed tank of boiler no 1 2 and 3, replacement of worn out ms beam and channel arrangement size- 4 inch or 5 inch of boiler no 1 and 2 arch, dismantling fabrication and fitting of safety valve worn out discharge assembly with proper support, replacement of worn out ms beam and channel arrangement size- 8inch 9inch for supporting side wall and roof tubes of boiler no 4 and 5, fabrication and erection of new racks for new mbc, fabrication and erection of new racks for old mbc, fabrication and erection of new racks for 3rd cross carrier chain, repairing of weak portion of racks of all bagasse carrier chains, dismantling of pan no 6 (196 sqm h s area 40ton) calandria providing the support for stay the shell above calandria unloading of new calandria from vehicle by their resources shifting of new calandria at the site fitting and erection of calandria at the place of old calandria with shell fitting of bottom cone of calandria inlet vapour or exhaust steam connection water line connection and making all other connection to run the body complete in all respect, dismantling of our old exhisting 600mm valve of 400 hp spray pump along with both side reducer providing support to to delivery line fitting and erection of new in all respect along with successful trial, dismantling of the existing vacuum crystallizer from ramala sugar mill,including safe removal of all connected pipelines,supports and accessories loading the dismantled vacuum crystallizer on their vehicle to nanauta sugar mill,unloading at site ,shifting to the designated location in the boiling house erection and complete installation with all necessary piping,structural modifications,and accesories required for successful commissioning the job shall be completed in all respects and made ready for smooth operation, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 2 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 3 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 4 inch diameter, dismantling,fabrication and erection of m s pipe line including bend or flange etc 6 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 8 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 10 inch diameter, dismantling fabrication and erection of bend size- 3 inch diameter ms, dismantling fabrication and erection of bend size- 4 inch diameter ms, dismantling fabrication and erection of bend size- 6 inch diameter ms, dismantling fabrication and erection of bend size- 8 inch diameter ms, dismantling fabrication and erection of nipple size- 1inch diameter ms, dismantling fabrication and erection of nipple size- 2 inch diameter ms, dismantling fabrication and erection of nipple size- 3 inch diameter ms, dismantling fabrication and erection of nipple size- 6 inch diameter ms, dismantling fabrication and erection of nipple size- 8 inch diameter ms, dismantling fabrication and erection of tee size- 8 inch diameter ms, dismantling fabrication and erection of tee size- 10 inch diameter ms, dismantling fabrication and erection of flange size- 4 inch diameter ms, dismantling fabrication and erection of flange size- 6 inch diameter ms, dismantling fabrication and erection of flange size- 8 inch diameter ms, dismantling fabrication and erection of flange size- 10 inch diameter ms, dismantling fabrication and erection of reducer size-6 inch diameter ms, dismantling fabrication and erection of reducer size-8 inch diameter ms, dismantling fabrication and erection of reducer size-10 inch diameter ms, dismantling ,fitting of valve size- 3 inch diameter, dismantling,fitting of valve size- 6 inch diameter, dismantling,fitting of valve size- 8 inch diameter, dismantling,fitting of valve size- 10 inch diameter, dismantling fabrication and fitting of man hole, dismantling , fabrication and erection of platform by using old new plate, fabrication and erection of cat or monkey ladder, fabrication and erection stair case, fabrication and erection of railing from old material, dismantling of ms heavy structure or tank, dismantling of ms light structure, fabrication and erection light structure, fabrication and erection heavy structure, ss plate lining in different size for various equipments, fabrication & erection of complete square rectangular round tank with conical bottom, fabrication and patchwork of equipments using old new ms plate by 6 8 mm thick plate over round vessels any vessels, fabrication of pump bed with pump reduction gear and motor alignment up to 7 5 h p, fabrication of pump bed with pump reduction gear and motor alignment up to 10 h p, fabrication of pump bed with pump reduction gear and motor alignment up to 15 h p, fabrication of pump bed with pump reduction gear and motor alignment up to 30 h p, fabrication of pump bed with pump reduction gear box and motor alignment above 100 hp
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 15, 2026
Tender Value :
20L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Safety Valve Scrap. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Safety Valve Scrap sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Safety Valve Scrap Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Safety Valve Scrap, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Safety Valve Scrap Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Safety Valve Scrap Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Safety Valve Scrap.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Safety Valve Scrap depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Safety Valve Scrap Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Safety Valve Scrap bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Safety Valve Scrap. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Safety Valve Scrap, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Safety Valve Scrap, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Safety Valve Scrap?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Safety Valve Scrap tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Safety Valve Scrap?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Safety Valve Scrap, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Safety Valve Scrap is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All