sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

337Latest Rubber frame Tenders List

Latest Rubber frame Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rubber frame tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rubber frame tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rubber frame Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rubber frame tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rubber frame Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rubber frame Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rubber frame Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rubber frame tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rubber frame Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rubber frame sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rubber frame tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rubber frame tenders.

Is EMD mandatory for all Rubber frame tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rubber frame work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rubber frame tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rubber frame Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17760134
Location : saran , bihar
Source : GEM Tenders
NEW TENDER
tender for hand punching mittons , mma boxing gloves , punching bag 60 kg , kick boxing head gear , wooden jevellin , training baton , silambam stick 5 6feet , heavy duty kicking shield , rubber training knife , rubber training stick , rope dart , sling shot , base ball bat , knuckle duster , bagh nakh, strike course items, material high quality pu leather synthetic leather padding multi layer high density eva foam size standard adult colour red, material premium pu leather synthetic leather weight 12 oz 14 oz 16 oz buyer to specify colour red multi layer eva foam padding full wrap around velcro, weight 60 kg material heavy duty pvc pu leather filling textile fabric shredded filling with high density compression colour black height approx 4 5 feet heavy duty hanging chains and swivel included double stitched with reinforced hanging loops suitable for heavy punching and kicking practice, material pu leather padding high density eva foam colour black full face protection cheeks chin and forehead adjustable velcro strap lightweight and sweat-resistant standard adult size suitable for kickboxing and sparring, material seasoned hardwood bamboo hardwood length approx 180 200 cm diameter approx 25 30 mm smooth polished finish straight body without cracks lightweight and balanced suitable for training purpose, material high impact polycarbonate rubber frp length approx 26 30 inches colour black non slip grip handle impact resistant smooth finish without sharp edges suitable for strike course and riot control training, material seasoned bamboo high quality hardwood length 5 6 feet 150 180 cm diameter 25 30 mm straight well balanced and crack free smooth polished finish with rounded edges lightweight and durable suitable for silambam and self defence training, material heavyduty pu leather synthetic leather padding multi layer high density eva foam double stitched with reinforced seams minimum three reinforced holding handles shock absorbing and tear resistant suitable for full contact kicking, material high density flexible rubber tpr colour black overall length approx 10 12 inches blunt edge and rounded tip for safe training anti slip grip handle flexible yet durable construction suitable for martial arts and self defence training, material high density rubber polyurethane colour green length approx 24 28 inches flexible and impact resistant smooth surface with non slip grip safe for training applications suitable for self defence and strike course practice, material soft rope with rubber foam training dart colour grey rope length approx 2 3 metres dart made of flexible rubber or foam durable braided rope balanced construction for controlled movement suitable for martial arts training only, frame material high strength polymer hardwood colour grey elastic band natural latex flat band ergonomic anti slip handle lightweight and durable suitable for target practice and training purposes, material solid hardwood ash wood colour brown length 32 34 inches weight approx 800 1000 g smooth polished finish comfortable non slip grip suitable for training and practice, material highdensity rubber tpr thermoplastic rubber colour black overall length approx 110 120 mm thicknessn approx 15 20 mm four finger ergonomic grip flexible and impact resistant construction rounded edges with no sharp points lightweight and durable suitable for martial arts and self defence training only, material highdensity rubber tpr colour black overall length approx 100 120 mm four curved training claws with rounded blunt tips two finger rings for secure grip flexible and tear-resistant construction smooth finish without sharp edges lightweight and suitable for repeated training use intended for martial arts and strike course training only
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Nov 03, 2026 (19 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17760356
Location : imphal , manipur
Source : GEM Tenders
NEW TENDER
tender for collapsible water tank , cgi sheet , cgi sheet mild steel , square pipe , square pipe thick , welding rod , hdpe sand bag , taping screw , coarse sand , aggregate , plastic tarpaulin , tarpaulin , cgi sheet1 , cgi sheet2 , cement portland , plaster sand , tiles , coloured tile , jet spray , angle cock , soap rack , ptmt pipe , ss peg set , led batten , white cement , iron angle , synthetic enamel paint white, collapsible water storage tank 500ltr capacity, mild steel corrugated galvanised (cgi) sheet 6ft x 3ft, 0.63 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, mild steel corrugated galvanised (cgi) sheet 12ft x 3ft, 0.63 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, square pipe 50mm x50mm x 5mm thick 20ft long, square pipe 36mm x36mm x 5mm thick 20ft long, welding rod (90 nos in each pkt), hdpe sand bags of size 14inch x 36inch, weight not less than 60 gms., taping screw 5inch with rubber washer, coarse sand (stone dust) conforming to is 383 1978., aggregate 20mm conforming to is 383 1978., plastic tarpaulin 30ftx30ft og colour, plastic tarpaulin 18ftx24ft og colour, mild steel corrugated galvanised (cgi) sheet 10ft x 3ft, 0.50 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, mild steel corrugated galvanised (cgi) sheet 8ft x 3ft, 0.50 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, cement portland pozzolana cement ppc cement, is 1489 (part2) for calcined clay based ppc,packed in 50 kgs hdpe bags . (make ambuja / acc / ultra tech/ dalmia/ ramco/ birla), plaster sand (stone dust) conforming to is 383 1978., vitrified ceramic coloured tiles of size 600mm x 600mm x 9 to 10mm thick make kajaria/ asian/ orient bell/ h and r johnson/ somany, anti skid vitrified coloured tiles of size 300mm x 300mm x 9 to 10mm thick make kajaria/ asian/ orient bell/ h and r johnson/ somany, jet spray for ewc, cp angle cock 15mm dia, pvc soap rack, ptmt pipe for gyser 600mm long, ss peg set 5 way, led batten surface 4ft long 18w, output 1600 lumen per watt with suitable powder coated frame, end cape and connector make philips/ bajaj/crompton/greaves/syska, white cement, iron angle 2 inch x 2 inch x 5 mm thick 20 feet long, synthetic enamel paint high gloss superiour quality white colour make assian/ burger/ narolac/ ici/ shalimar each 1 ltr
Agency / Dept :
indian army
Due Date :
Oct 23, 2026 (8 days left)
Tender Value :
4.85L
View Documents
T18 Ref No : 17761067
Location : new delhi , delhi
Source : GEM Tenders
NEW TENDER
tender for commercial heavy-duty treadmill , commercial cross trainer , commercial rowing machine , functional trainer or multi gym , adjustable commercial gym bench , commercial dumbbell set with rack , olympic barbells or plates , rubberized flooring , gym mirrors , decorative ceiling fans , aicte gym electric sign board , commercial adjustable bench with rack, supply installation and commissioning of gym equipment and flooring for aicte wellness centre, built with a heavy-duty steel frame and capable of supporting a minimum user weight of 180 kg, each cross trainer shall feature a heavy- duty steel frame, electromagnetic resistance system, ergonomic handlebars, non-slip pedals, and an advanced digital console displaying workout parameters such as time, distance, speed, calories, heart rate, and resistance levels., the equipment shall feature a robust steel frame, smooth resistance mechanism, ergonomic seating, and an advanced performance monitor, featuring dual adjustable pulleys, weight stacks, and multiple exercise stations, it enables users to perform exercises targeting all major muscle groups., equipped with commercial heavy-duty adjustable gym benches suitable for a wide range of strength training exercises. constructed with a robust steel frame and high-density cushioning, these benches shall support flat, incline, and decline positions for versatile workouts., equipped with a commercial-grade rubber-coated dumbbell set comprising pairs ranging from 2.5 kg to 30 kg to cater to users with varying fitness levels., a mix of bar types is necessary to accommodate different heights, strength levels, and exercises, equipped with heavy-duty commercial-grade rubberized flooring over an area of approximately 1000 sq. ft., 4 ft x 6 ft, bldc type, illuminated indoor sign board for aicte gym, oversized rubberized non-slip feet bolted or widened to prevent shifting and protect gym flooring
Agency / Dept :
all india council for technical education AICTE
Due Date :
Nov 03, 2026 (19 days left)
Tender Value :
25L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17758474
Location : tinsukia , assam
Source : GEM Tenders
NEW TENDER
tender for gun maintenance mechanism trainer - main base frame , base longitudinal member , base cross member , main vertical support , vertical side support plates , hydraulic cylinder , hydraulic cylinder body , hydraulic ram capacity , hydraulic pump , pump operating lever , main pulling arm , pulling arm pivot pin , secondary link , connecting link , pulling chain , chain connection shackle , holding hook , main equipment cradle , cradle base plate , cradle side plate , adjustable clamp , main locking pin , secondary locking pin , adjustable screw , adjustable hand wheels , main transport wheels , support wheel , main wheel axle , support wheel axle , outrigger arm , stabilizer vertical post , stabilizer foot , stabilizer operating handle , hydraulic hose , hydraulic pipe , structural gusset plates , main load bearing plates , general brackets , pivot bush , safety retaining pins , fasteners, gun maintenance mechanism trainer, heavy duty ms rectangular or square section, ms square or rectangular hollow section, ms square or rectangular section, heavy duty ms fabricated section, ms plate, heavy duty hydraulic cylinder, seamless or heavy duty steel cylinder, suitable hydraulic ram, manual hydraulic pump, ms tubular or solid operation handle, heavy duty fabricated ms rectangular section, high strength steel pin, ms flat or plate fabricated member, heavy duty ms flat, heavy duty rated steel chain, rated steel bow or d shackle, forged or rated steel hook, fabricated ms plate or section, ms plate, heavy duty ms fabricated clamp, high strength steel, high strength threaded steel rod, ms or steel fabricated hand wheel, heavy duty steel or pu or rubber wheel, heavy duty wheel, solid en8 or equivalent steel shaft, solid steel shaft, ms tubular fabricated member, ms tube or solid fabricated member, ms tubular handle, high pressure hydraulic hose, high pressure rated steel fittings, hardened steel or phosphor bronze or equivalent, high strength steel with r-clip or cotter, high tensile nuts and bolts
Agency / Dept :
indian army
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
1.02L
View Documents
T18 Ref No : 17758357
Location : dumra , bihar
Source : GEM Tenders
NEW TENDER
tender for mechanical engineering lab - heavy section forged steel , bevel edge chisel set 6, 12, 18, 25, 32 mm hardened steel, bevelled sides , jack plane no. 5 equivalent, 350 mm sole, adjustable iron , smoothing plane no. 4 equivalent, 240 250 mm sole , block plane 230 mm, lo -angle adjustable blade , wooden trying plane 450 600 mm sole, hardwood body , hand drill 10 mm chuck, geared manual, steel frame , brace bit set adjustable brace with 6 12 mm auger wood bits , auger bit set 6 25 mm, wood auger bits, hcs tool steel , claw hammer 450 g head, forged steel, balanced hardwood fibreglass handle , mallet 450 600 g, hardwood rubber striking face , nail set punch set 1.5 4 mm assorted hardened steel punches , woodworking bench vice 150 mm jaw, approx. 200 mm opening, cast iron body , g clamp 50, 75, 100, 150 mm assorted sizes, forged cast steel , f bar clamp 300 600 mm capacity, quick adjust steel bar , hand screw clamp wooden jaws, approx. 150 250 mm capacity , raspfile set flat, half round and round 200 300 mm , wood rasp 200 250 mm, coarse fine assorted , screwdriver set flat and phillips pozi , pliers set combination, long nose and side- cutting pliers, 150 200 mm , adjustable wrench 200 250 mm, chrome vanadium steel , screw clamp quick clamp approx. 150 300 mm capacity, quick release , pedestal bench drill machine 13 16 mm chuck , tool cabinet lockable steel wood cabinet with multiple drawers and tool slots , tool rack panel wall mounted , safety goggles impact resistant polycarbonate lens, side protection , first aid box industrial first-aid kit with dressings , dust extraction unit portable central extractor , pelton turbine test rig , francis turbine test rig , kaplan turbine test rig , centrifugal pump test rig , reciprocating pump test rig , verification of maxwell s reciprocal theorem , continuous beam deflection test , strain measurement , tool kit 100 pcs kits contains , screw driver set , open channel flume , gas tungsten arc welding (gtaw) machine, bench vice best quality 6 size tough, surface plate 24x24, fixed hand hacksaw frame 12, adjustable hand hacksaw frame 12, hand hacksaw blade 12, hand hacksaw blade 1x12, straight shank twist drill bit sizes, taper shank twist drill bit. sizes, steel rule-30cm., verniercalliper, 0 150mm, micrometer, 0-25mm and 0-50mm, vernier height guage 12 4, tap wrench 25mm with handle scibber, die wrench 50mm. with handle dot punch 6, hand drilling machine with try square 12, single cut flat file 12, doubble cut flat file 12, round file 12, half round file 12, flat chisel, cross cut chisel, ball peen hammer 200 gm, cross pin hammer 200gm, ball peen hammer 500 gm, cross pin hammer 500gm, center punch high carbon steel,, dot punch high carbon steel, hardened and tempered striking ends, point angle 60 degrees, length 100 mm, divider leg length 150 mm, forged carbon steel, outside calliper leg length 150 mm forged carbon steel, hand held welding shields with din shade filter glasses, chipping hammers with wire brushes, and leather welding gloves, welding electrode e7018 e7015, steel measuring tape 5 m, 25 mm wide, metric graduation, lock mechanism, steel rule 300 mm, stainless steel, etched graduations, 0.5/1 mm divisions, try square 300 mm blade, hardened steel blade, rigid hardwood metal stock, marking gauge 150 mm capacity, hardwood body, adjustable spur, mortise gauge 150 mm capacity, twin adjustable spurs, sliding bevel 200 mm blade, adjustable angle, locking screw, spirit level 600 mm, aluminium body, horizontalvertical vials, plumb bob 250 g bob with cord reel, hand saw 550 mm blade, 7 10 tpi, hardened teeth, wooden ergonomic handle, tenon saw 350 mm blade, 10 14 tpi, rigid back, wood handle, coping saw 150 mm approx. frame, replaceable fine blade, keyhole jab saw 200 mm pointed blade, hardened steel, panel saw 600 mm blade, 7 10 tpi, hardened teeth, firmer chisel set 6, 12, 18, 25, 32 mm forged hardened steel blades with impact resistant handles, mortise chisel set 6, 8, 10, 12, 16 mm heavy section forged steel, bevel edge chisel set 6, 12, 18, 25, 32 mm hardened steel, bevelled sides, jack plane no. 5 equivalent, 350 mm sole, adjustable iron, smoothing plane no. 4 equivalent, 240 250 mm sole, block plane 230 mm, low angle adjustable blade, wooden trying plane 450 600 mm sole, hardwood body, hand drill 10 mm chuck, geared manual, steel frame, brace bit set adjustable brace with 6 12 mm auger wood bits, auger bit set 6 25 mm, wood auger bits, hcs tool steel, claw hammer 450 g head, forged steel, balanced hardwood fibreglass handle, mallet 450 600 g, hardwood rubber striking face, nail set punch set 1.5 4 mm assorted hardened steel punches, woodworking bench vice 150 mm jaw, approx. 200 mm opening, cast iron body, g clamp 50, 75, 100, 150 mm assorted sizes, forged cast steel, f bar clamp 300 600 mm capacity, quick adjust steel bar, hand screw clamp wooden jaws, approx. 150 250 mm capacity, rasp file set flat, half-round and round 200 300 mm, wood rasp 200 250 mm, coarse fine assorted, screwdriver set flat and phillips pozi, 75 150 mm blades, insulated impact resistant handles, pliers set combination, long nose and side cutting pliers, 150 200 mm, adjustable wrench 200 250 mm, chrome vanadium steel, screw clamp quick clamp approx. 150 300 mm capacity, quick release, pedestal bench drill machine 13 16 mm chuck, 0.5 1 hp, 8 12 speed settings, guarded spindle, tool cabinet lockable steel wood cabinet with multiple drawers and tool slots, tool rack panel wall mounted, safety goggles impact resistant polycarbonate lens, side protection, first aid box industrial first-aid kit with dressings, antiseptic, bandages and basic supplies, dust extraction unit portable central extractor, approx. 1.5 3 hp, cartridge bag filter, machine connection ports, pelton turbine test rig, francis turbine test rig, kaplan turbine test rig, centrifugal pump test rig, reciprocating pump test rig, verification of maxwell s reciprocal theorem, continuous beam deflection test, strain measurement 0 200 gm strain gauge cantilever trainer kit, display type digital, tool kit 100 pcs kits contains, screw driver set, open channel flume
Agency / Dept :
department of science and technology DST
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
69.36L
View Documents
T18 Ref No : 17759144
Location : kollam , kerala
Source : GEM Tenders
NEW TENDER
corrigendum tender for quad copter 450 to 500mm class frame kit , brushless motor , esc 40a, 4s , flight controller , propellers 10 by 4.5 inch set , power distribution board, high current , power module , shock absorber set , lipo battery, 4s, 5200mah , radio transmitter and receiver,10 channel , gps and compass module , telemetry kit , wiring, connectors set , lipo battery charger, 4s, balance or multi-port, 450 to 500 mm class quad copter development and assembly kit, carbon fibre or composite quadcopter frame, 450 to 500mm wheelbase, fixed or foldable arm design, integrated fc or pdb mounting deck, frame weight less than or equal to 450g, payload capacity greater than or equal 800 gm., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal 20a, max thrust greater than or equal 1.2kg with 1045 propeller., blheli-compatible esc, continuous current rating 40a, input 4s lipo., 32-bit arm cortex-m7 or better processor, open-source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 10 by 4.5 inch propellers, factory-balanced cw/ccw pair per set, glass-fibre-reinforced nylon construction, adapter included., high current pdb, continuous rating greater than or equal 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input 4s to 6s lipo, regulated 5.3v/3a output to fc, analogue voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 450mm to 500 mm class frame., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., gnss module with integrated compass, update rate greater than or equal to 5hz, uart interface, compatible with listed flight controllers., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 4s to 6s lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 5200mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
2L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17759148
Location : kollam , kerala
Source : GEM Tenders
NEW TENDER
corrigendum tender for quad copter 650 to 700 mm class frame kit , brushless motor , esc 40a, 6s , flight controller, 32-bit arm cortex- m7 class or better , propellers 15 by 5.5 inch, carbon fibre set , power distribution board , high current, 6s with bec , power module , shock absorber set , lipo battery, 6s, 8000mah , radio transmitter and receiver, 10 channel , gps and compass module m9n or equivalent , telemetry kit , wiring, connectors set , lipo battery charger, 6s, balance or multi port, 650 to 700mm class quad copter development and assembly kits, carbon fibre or glass reinforced composite quadcopter frame, 650 to 700 mm class wheelbase, fixed or foldable arm design, integrated mounting deck for flight controller, pdb and battery tray, arm wall thickness greater than or equal to 4mm carbon tube, frame weight less than or equal to 1100 to 1200 g, payload capacity greater than or equal to3kg, includes landing gear., brushless dc outrunner motor, kv rating 350 to 410kv, continuous current handling greater than or equal to 25a, max thrust greater than or equal to 1.5kg on 6s lipo with 15 inch propeller, unit weight 110g to 150g, blheli_32 (or equivalent) firmware esc, continuous current rating 40a (burst greater than or equal to 55a), input 6s lipo, 32-bit arm cortex m7 or better processor, open source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 15 by 5.5 inch carbon fibre reinforced propellers, self locking / quick release type, factory balanced cw/ccw pair per set., pdb rated for 6s input, continuous current handling greater than or equal to 100a, integrated 5v/3a and 12v/2a bec outputs, xt60 input connector, multiple esc output pads., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input up to 6s lipo, regulated 5.3v/3a output to fc, analog voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 650mm to 700 mm class frame., lithium polymer battery, 6s (22.2v nominal, 25.2v fully charged), capacity 8000mah, minimum continuous discharge rate 25c, equipped with an amass xt60 main power connector with balance connector, integral over-charge/discharge protection., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., u blox m9n (or equivalent) gnss module with integrated magnetometer/compass, position update rate greater than or equal to 10hz, uart/i2c interface, integrated led & safety switch pad., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 6s (22.2v) lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 8000mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
3L
View Documents
T18 Ref No : 17444285
Location : nashik , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for item no 1 , item no 2 , item no 2a , item no 2b , item no 3 , item no 4 , item no 5 , item no 6 , item no 7 , item no 8, designing (aesthetically), and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6 m c/c for esrs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder, c.i. manhole frame and covers, ater level indicators, lighteningconductor, g.i. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, m.s. grill gate of 2 m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per i.s. code. the job to include painting the name of the scheme and other details on the reservoir as per the directions of engineer-in-charge rcc tank- of 75000 litres capacity, providing and supplying isi standard welded di double flanged pipe excluding gst levied by goi & gom in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by engineer -in- charge. (for 2.75 m bare pipe) inlet pipe 100 mm, outlet pipe 100 mm, overflow 100 mm, providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete, providing and supplying isi standard d.i. specials & fittings with sealing rubber gasket of s.b.r.,complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes excluding cost of all labours and materials and transportation to stores / site, loading , unloading excluding all taxes , etc. complete. 80 to 300 mm dia, portable water purifiers or filters,, filter sand, proposed rising main from well to 75,000 litre tank, pure water pumping machinery 7.5 hp (1w+1s) for esr
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Oct 17, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17444304
Location : nashik , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for item no 1 , item no 2 , item no 2a , item no 2b , item no 3 , item no 4 , item no 5 , item no 6 , item no 7 , item no 8, designing (aesthetically), and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6 m c/c for esrs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder, c.i. manhole frame and covers, ater level indicators, lighteningconductor, g.i. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, m.s. grill gate of 2 m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per i.s. code. the job to include painting the name of the scheme and other details on the reservoir as per the directions of engineer-in-charge rcc tank- of 75000 litres capacity, providing and supplying isi standard welded di double flanged pipe excluding gst levied by goi & gom in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by engineer -in- charge. (for 2.75 m bare pipe) inlet pipe 100 mm, outlet pipe 100 mm, overflow 100 mm, providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete, providing and supplying isi standard d.i. specials & fittings with sealing rubber gasket of s.b.r.,complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes excluding cost of all labours and materials and transportation to stores / site, loading , unloading excluding all taxes , etc. complete. 80 to 300 mm dia, portable water purifiers or filters,, filter sand, proposed rising main from well to 75,000 litre tank, pure water pumping machinery 7.5 hp (1w+1s) for esr
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Oct 17, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16883686
Location : palakkad , kerala
LIVE TENDER
auction of machinary, dust collector, 1250 kva distibution transformer, hydraulic rubber bale cutter and accessories. three roll type calendar, heavy duty mixing mill, cooling drum train tread rubber extruder, weighting kit for vileigh bridge, 700 mt hydraulic press, 60 mt hydraulic press. mainframe and cylinder piston assembly for 700 mt hydraulic press, main frame cylinder position assembly for 700 mt hydraulic press, k4 intermix auxiliary equipment with capacity 25 tonnes day. thermic fluid heat exchanger fire fluid heat exchanger and accessories, refurbished sheeting mill auxiliary equipments, batch off unit auxiliary equipments, buffing machine and solution mixer, conveyor for extruder and intermix, electronic weighing machine, moulds, m.s. chute for lintermix, pumps 5 hp and; 7.5 hp. welding machine, chain block and power tools. mold holding plate supporting leg and; accessories, ms skid, alfred herbert k4 intermix machine s.no. k4-13398, reverse osmosis system capacity 500 lph with dosing pump, ply glass vessel, multiport valve with accessories, density specific gravity tester and; height, lab equipments oscillating disc rheometer, tensile testing machine, hydraulic manual packing box, dumbbell cutting press). voltas make 3 ton capacity fork lifts specific gravity lab with pneumatic press, air conditioner tables and chairs, vacuum cleaner, pallet truck (6 nos.), pallet trolley (2 nos.), steel ladder pedestalfan, steel bench, table (4 nos. office room: cpu 12 nios, monitor, printer (hp and; epson), new steel tables size 4x16 (2 nos.) and 4x8 (1 no electricals: mv panel, mccb panel, rtcc panel, acb 2 nos. (2000a and; 1250a), indoor vcb 630a and electrical accessories
Agency / Dept :
indian bank IB
Due Date :
Jul 08, 2028 (632 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rubber Frame. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rubber Frame sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rubber Frame Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rubber Frame, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rubber Frame Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rubber Frame Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rubber Frame.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rubber Frame depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rubber Frame Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rubber Frame bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rubber Frame. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rubber Frame, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rubber Frame, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rubber Frame?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rubber Frame tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rubber Frame?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rubber Frame, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rubber Frame is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All