sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

24Latest Rail joint repair Tenders List

Latest Rail joint repair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rail joint repair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rail joint repair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rail joint repair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rail joint repair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rail joint repair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rail joint repair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rail joint repair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rail joint repair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rail joint repair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rail joint repair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rail joint repair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rail joint repair tenders.

Is EMD mandatory for all Rail joint repair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rail joint repair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rail joint repair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rail joint repair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16711663
Location : mumbai , maharashtra
LIVE TENDER
tender for welding of rail joint with 52kg & 60kg portion with contractor's material and equipments and supply of skv welding kit in special repair den east section
Agency / Dept :
central railway CR
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
2.72Cr
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents
T18 Ref No : 16730238
Location : danapur , bihar
LIVE TENDER
tender for execution of alumino-thermit (skv) welding work of rail joints, including supply of welding portions (60 kg/60 ei-r260 & 60 kg, 52 kg 90 uts) and provision of labour, tools & plants, consumables, supervision and all ancillary activities under the jurisdiction of special repair den/2/dnr
Agency / Dept :
east central railway ECR
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
1.75Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16975909
Location : dantewada - cg , chhattisgarh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for spares of tata bs 6 buses 1600853576- hex bolt m20x1.5x145, part no. 11063998097 , 1600557592- hex nut m8 is1364p3-8- ss8451s2-y part no. 12052500808 , 1600557600- air processing unit, part no. 208243710108 , 1600052614- threaded end repair kit, part no. 216346990105 , 1600557577- accelerator pedal assy, part no. 219630100104 , 1600058780- boost pressure sensor, part no. 252515209901 , 1600037676- assy.electric fuel pump euro-ii part no. 252707100189 , 1600034126- air filter element outer- bus marcopo part no. 252709140258 , 1600054547- air filter element safety part no. 252709140259 , 1600853592- hump hose-lplpt709 bs6, part no. 252714605808 , 1600054531- hump hose part no. 253414605801 , 1600853577- spacer, part no. 257332608601 , 1600013268- u clamp, part no. 257532204207 , 1600350191- bush king pin bs-1-2-3-4, part no. 257533203401 , 1600022693- guide plate, part no. 257632203701 , 1600058729- crank speed sensor, part no. 571015209902 , 1600729364- washer, part no. 257632808307 , 1600052562- cotter pin king pin to stub axle part no. 257633206707 , 1600022322- king pin normal, part no. 257633206709 , 1600013341- steering pump, part no. 261846600101 , 1600853597- spacer, part no. 263132808601 , 1600013355- assy wheel nut, part no. 263140100107 , 1600037294- hub bolt, part no. 263140106701 , 1600348850- mounting pin, part no. 264032906702 , 1600022742- assy clutch master cylinder 19.05 dia part no. 264129100117 , 1600853595- clutch pedal assy bush, part no. 264229100168 , 1600853606- dual brake valve, part no. 264243700120 , 1600028955- set of crown wheel and pinion, part no. 266835300130 , 1600853605- rear hub assy, part no. 266835600111 , 1600013513- oil seal cr seals, part no. 269126257808 , 1600504638- clutch disc assy dia 330 bs6-ph2 part no. 272425200265 , 1600504437- clutch cover assy dia 330 bs6-ph2 part no. 272425400265 , 1600504640- clutch release bearing assy bs6, part no. 272425600284 , 1600203325- rear brake chamber, part no. 275243700107 , 1600013549- rear shock absorber, part no. 277032600101 , 1600557576- hose assy. cmc to reservoir, part no. 277629100124 , 1600853573- hex.bolt m24x1.5, part no. 277632603201 , 1600557578- hexflnut m20x1.5 - 10 iso12126, part no. 277832406512 , 1600557579- assy rubber bush antiroll bar dia 50 part no. 277832900113 , 1600037440- repair kit drag link, part no. 277846800121 , 1600504641- assy. clutch booster 90 dia. bs1-2-3-4 b part no. 282129100103 , 1600037312- tapper rlr thrust brg pin, part no. 284633203101 , 1600853579- castle nut m20x2, part no. 284642106501 , 1600557575- gear shift unit, part no. 580326820163 , 1600853578- collared pin m20x2x145, part no. 284642106713 , 1600557595- graduated hand control valve, part no. 284643700164 , 1600557598- relay valve-rg2 del1-as cast and del2-metri part no. 284643710130 , 1600052598- assy hose 3-8with o-ring and 490mm length part no. 284643910155 , 1600350224- breather hose assy, part no. 284645100102 , 1600853583- taper roller bearing bs6, part no. 284933400110 , 1600557573- shifter cable assy, part no. 285526820217 , 1600557574- gear shift lever, part no. 285526826095 , 1600853568- reverse light switch, part no. 287054509920 , 1600853580- castle nut m16x1.5, part no. 289242106501 , 1600058874- auto slack adjuster heldex, part no. 289242300119 , 1600385227- brake lining aff0020 bs6ph2, part no. 290042990129 , 1600853572- bracket rh shock absorber, part no. 410332603301 , 1600853571- bracket lh shock absorber, part no. 410332603302 , 1600557589- shock absorber assy rear, part no. 410532600102 , 1600489402- anti roll bar, part no. 410532800112 , 1600504643- brake drum bs6-ph2, part no. 410642103723 , 1600853574- hex fl bolt m14x2x55, part no. 501132403202 , 1600853575- hex fl bolt m14x2x70, part no. 501132403222 , 1600853582- ball joint assy rh bs6, part no. 502333800103 , 1600853581- ball joint assy lh bs6, part no. 502333800104 , 1600058943- kit-filter bs, part no. 503046600107 , 1600557588- hex nut, part no. 503932406501 , 1600504645- auto slack adjuster-160cd st.50 crank part no. 504042100107 , 1600058880- auto slack adjuster asy, part no. 504042100166 , 1600024803- starter motor, part no. 550515109902 , 1600557585- tip insert, part no. 550632107702 , 1600557584- tip insert, part no. 550632107703 , 1600853613- rubber hose assy, part no. 550643910138 , 1600853594- brake pedal assy with bush, part no. 550729200242 , 1600853596- pipe assy cmc to booster, part no. 550729300130 , 1600853607- adapter modulator valve, part no. 550743700226 , 1600557599- brake chamber, part no. 550743700255 , 1600853609- metal pipe with crimp hose, part no. 550743920202 , 1600853610- metal pipe hose to joint, part no. 550743920203 , 1600853611- metal pipe joint 1 to 2, part no. 550743920204 , 1600853617- suction line assy, part no. 550746800208 , 1600853618- pressure line, 1600853576- hex bolt m20x1.5x145, part no. 11063998097, 1600557592- hex nut m8 is1364p3-8-ss8451s2-y part no. 12052500808, 1600557600- air processing unit, part no. 208243710108, 1600052614- threaded end repair kit, part no. 216346990105, 1600557577- accelerator pedal assy, part no. 219630100104, 1600058780- boost pressure sensor, part no. 252515209901, 1600037676- assy.electric fuel pump euro-ii part no. 252707100189, 1600034126- air filter element outer- bus marcopo part no. 252709140258, 1600054547- air filter element safety part no. 252709140259, 1600853592- hump hose-lp- lpt709 bs6, part no. 252714605808, 1600054531- hump hose part no. 253414605801, 1600853577- spacer, part no. 257332608601, 1600013268- u clamp, part no. 257532204207, 1600350191- bush king pin bs-1-2-3-4, part no. 257533203401, 1600022693- guide plate, part no. 257632203701, 1600058729- crank speed sensor, part no. 571015209902, 1600729364- washer, part no. 257632808307, 1600052562- cotter pin king pin to stub axle part no. 257633206707, 1600022322- king pin normal, part no. 257633206709, 1600013341- steering pump, part no. 261846600101, 1600853597- spacer, part no. 263132808601, 1600013355- assy wheel nut, part no. 263140100107, 1600037294- hub bolt, part no. 263140106701, 1600348850- mounting pin, part no. 264032906702, 1600022742- assy clutch master cylinder 19.05 dia part no. 264129100117, 1600853595- clutch pedal assy bush, part no. 264229100168, 1600853606- dual brake valve, part no. 264243700120, 1600028955- set of crown wheel and pinion, part no. 266835300130, 1600853605- rear hub assy, part no. 266835600111, 1600013513- oil seal cr seals, part no. 269126257808, 1600504638- clutch disc assy dia 330 bs6-ph2 part no. 272425200265, 1600504437- clutch cover assy dia 330 bs6-ph2 part no. 272425400265, 1600504640- clutch release bearing assy bs6, part no. 272425600284, 1600203325- rear brake chamber, part no. 275243700107, 1600013549- rear shock absorber, part no. 277032600101, 1600557576- hose assy. cmc to reservoir, part no. 277629100124, 1600853573- hex.bolt m24x1.5, part no. 277632603201, 1600557578- hexflnut m20x1.5 - 10 iso12126, part no. 277832406512, 1600557579- assy rubber bush antiroll bar dia 50 part no. 277832900113, 1600037440- repair kit drag link, part no. 277846800121, 1600504641- assy. clutch booster 90 dia. bs1-2-3-4 b part no. 282129100103, 1600037312- tapper rlr thrust brg pin, part no. 284633203101, 1600853579- castle nut m20x2, part no. 284642106501, 1600557575- gear shift unit, part no. 580326820163, 1600853578- collared pin m20x2x145, part no. 284642106713, 1600557595- graduated hand control valve, part no. 284643700164, 1600557598- relay valve-rg2 del1-as cast and del2-metri part no. 284643710130, 1600052598- assy hose 3-8with o-ring and 490mm length part no. 284643910155, 1600350224- breather hose assy, part no. 284645100102, 1600853583- taper roller bearing bs6, part no. 284933400110, 1600557573- shifter cable assy, part no. 285526820217, 1600557574- gear shift lever, part no. 285526826095, 1600853568- reverse light switch, part no. 287054509920, 1600853580- castle nut m16x1.5, part no. 289242106501, 1600058874- auto slack adjuster heldex, part no. 289242300119, 1600385227- brake lining aff0020 bs6ph2, part no. 290042990129, 1600853572- bracket rh shock absorber, part no. 410332603301, 1600853571- bracket lh shock absorber, part no. 410332603302, 1600557589- shock absorber assy rear, part no. 410532600102, 1600489402- anti roll bar, part no. 410532800112, 1600504643- brake drum bs6-ph2, part no. 410642103723, 1600853574- hex fl bolt m14x2x55, part no. 501132403202, 1600853575- hex fl bolt m14x2x70, part no. 501132403222, 1600853582- ball joint assy rh bs6, part no. 502333800103, 1600853581- ball joint assy lh bs6, part no. 502333800104, 1600058943- kit-filter bs, part no. 503046600107, 1600557588- hex nut, part no. 503932406501, 1600504645- auto slack adjuster-160cd st.50 crank part no. 504042100107, 1600058880- auto slack adjuster asy, part no. 504042100166, 1600024803- starter motor, part no. 550515109902, 1600557585- tip insert, part no. 550632107702, 1600557584- tip insert, part no. 550632107703, 1600853613- rubber hose assy, part no. 550643910138, 1600853594- brake pedal assy with bush, part no. 550729200242, 1600853596- pipe assy cmc to booster, part no. 550729300130, 1600853607- adapter modulator valve, part no. 550743700226, 1600557599- brake chamber, part no. 550743700255, 1600853609- metal pipe with crimp hose, part no. 550743920202, 1600853610- metal pipe hose to joint, part no. 550743920203, 1600853611- metal pipe joint 1 to 2, part no. 550743920204, 1600853617- suction line assy, part no. 550746800208, 1600853618- pressure line assy, part no. 550746800209, 1600853619- return line assy, part no. 550746800210, 1600853614- spline tube assy, part no. 550746990211, 1600853608- assy. belt driven compr, part no. 550843700101, 1600557596- relay valve and modulator valve assy part no. 551343700101, 1600557597- brake valve assy, part no. 551343700107, 1600557568- alternator, 12v, 120a, 8 groove pulley part no. 552915400101, 1600557572- bracket ass engine mtg rear, part no. 552924200110, 1600557581- leaf spring assy front, part no. part no. 552932100114, 1600770803- 1st leaf assy with bus, part no. 552932100115, 1600557583- table drg centre bolt-rear leaf spring part no. 552932103203, 1600853634- bracket spring hanger f f, part no. 552932103704, 1600853635- spring bkt front rwd, part no. 552932103705, 1600853598- 4th leaf, part no. 552932107126, 1600828139- 3rd front leaf spring bs-6, part no. 552932107128, 1600828138- 2nd front leaf spring bs-6, part no. 552932107129, 1600853600- caster plate, part no. 552932207114, 1600853603- caster plate, part no. 552932207115, 1600557586- leaf spring assy, rear, part no. 552932400111, 1600828140- 1st rear leaf spring assy with bush bs-6 part no. 552932400113, 1600853601- 3rd leaf, part no. 552932407130, 1600853602- 4th leaf, part no. 552932407132, 1600828141- 2nd rear leaf spring bs-6, part no. 552932407133, 1600557587- u-clamp, part no. 552932504204, 1600853604- front hub assy, part no. 552933400105, 1600853612- metal pipe joint to ddu, part no. 552943900216, 1600504648- hose assy front brake chamber part no. 552943950202, 1600853616- steering gear box assy, part no. 552946600112, 1600853615- bracket stg gear box, part no. 552946703302, 1600853620- fuel suction pipe ft to efp part no. 552947600167, 1600853623- return fuel pipe en to f.t part no. 552947600169, 1600853624- return fuel pipe fil - f.t part no. 552947600173, 1600853621- fuel suction pipe, part no. 552947600177, 1600853622- fuel pipe eng fil to fip, part no. 552947600179, 1600853629- pipe assy front bs6, part no. 552949200128, 1600853630- pipe assy urea supply, part no. 552949200132, 1600853599- rubber bush assy, part no. 553032100106, 1600557582- center pad assembly leaf spring part no. 553332108301, 1600557580- rubber bush, anti roll bar, part no.553332807701, 1600046126- tube part no. 51z3230214, 1600557594- cross assy, part no. 553341990101, 1600557593- center bearing assy, part no. 553341990102, 1600058728- coolant temperature sensor, part no.570515209906, 1600054540- crank shaft rear seal part no. 570603107802, 1600557222- flywheel ass w driving ring, part no.570603110104, 1600853589- common rail assy with p.s, part no.570607140126, 1600853584- hp pipe fip to rail bs6, part no.570607140133, 1600853585- hp pipe rail to injector, part no.570607140134, 1600853586- hp pipe rail to injector, part no.570607140135, 1600853587- hp pipe rail to injector, part no.570607140136, 1600853588- hp pipe rail to injector, part no.570607140137, 1600557224- fuel filter assy, part no. 570609110122, 1600557223- fuel filter assy, part no. 570609110123, 1600853590- overflow pipe fip to accu, part no.570609120104, 1600853591- overflow pipe common rail, part no.570609120105, 1600557225- air supply pipe assy, air compressor part no. 570613130151, 1600722635- urea injector part no.570614110191, 1600029951- egr valve part no. 570614110243, 1600853570- oil return pipe assy tc, part no.570614510129, 1600557226- turbocharger assy, part no. 570614510135, 1600054532- gasket part no. 570614515313, 1600557227- gasket turbocharger air intake part no. 570614515317, 1600853569- gasket exhaust manif to tc, part no.570614515320, 1600853626- urea pump supply module, part no.570614990107, 1600136144- auto tensioner for 8pk belt gates part no. 570615140109, 1600853628- sensor particulate matter, part no.570615240101, 1600853625- sensor urea quality bs6, part no.570615240103, 1600557569- oil filter element spinon bs6 part no. 570618130105, 1600504639- water pump assy 3.3l nge bs-iv bs6 part no. 570620100104, 1600557571- thermostat element bs6, part no. 570620120217, 1600136145- hose cylinder block to oil cooler part no. 570620125803, 1600557570- fan, part no. 570620140154, 1600504435- poly v-belt bs6, part no. 570623126346, 1600504436- poly v-belt bs6, part no. 570623126352, 1600853593- oil return hose, part no. 570623145801, 1600853633- radiator assy bs6, part no. 570650100299, 1600853631- pipe ic to air intake, part no. 570650103807, 1600348829- radiator to t connec. hose bus 570650105 part no. 570650105814, 1600136178- hose thermostat to radiator part no. 570650105820, 1600853632- hose, part no. 570650115805, 1600058778- pfm sensor, part no. 570915400107, 1600058956- exhaust temperature sensor, part no. 570915400108, 1600058955- differential pr sensor, part no. 570915400110, 1600853627- temperature sensor catcon, part no. 570915400115
Agency / Dept :
national mineral development corporation limited nmdc limited
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
160.09Cr
View Documents
T18 Ref No : 16073706
Location : mumbai , maharashtra
tender for at welding of rail joints for 52 kg/ 60 kg track under special repair den/s/csmt section.
Agency / Dept :
central railway CR
Due Date :
Jul 14, 2026
Tender Value :
1.69Cr
View Documents
T18 Ref No : 15665214
Location : rangiya , assam
tender for re-fabrication of in situ glued insulated rail joints/cast-in-situ glued insulated rail joints in 90r/52 kg/60 kg rail under the jurisdiction of special repair den/ii/rny.
Agency / Dept :
northeast frontier railway NFR
Due Date :
Jun 26, 2026
Tender Value :
1.22Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15687350
Location : rangiya , assam
tender for re-fabrication of in situ glued insulated rail joints/cast-in-situ glued insulated rail joints in 90r/52 kg/60 kg rail under the jurisdiction of special repair den/ii/rny.
Agency / Dept :
northeast frontier railway NFR
Due Date :
Jun 29, 2026
Tender Value :
1.22Cr
View Documents
T18 Ref No : 15630148
Location : mumbai , maharashtra
tender for a)balance work of welding of rail joints with 52kg & 60kg portion with contractor & material and equipment's and supply of skv welding kit in south east section under aden(n)lnl. b)balance work of welding of rail joints with 52kg & 60kg portion with contractors material and equipment's and supply of skv welding kit in special repair den (se) section.
Agency / Dept :
central railway CR
Due Date :
Jun 23, 2026
Tender Value :
2.14Cr
View Documents
T18 Ref No : 16453318
Location : guntur , andhra pradesh
tender for sw-i: guntur - nadikudi section: complete track renewal (p) - 2.00 tkm, through rail renewal (p) - 21.947 tkm & through sleeper renewal (p) - 2.90 tkm sw-ii: nadikudi - macherla section: through rail renewal (p) - 17.623 tkmsw-iii: through fittings renewal - 17.95 tkm (all fittings) & 38.93 tkm (rubber pad only) in special repair den/north/gnt sectionsw-iv: through ballast renewal (main line) by bcm for a total length of 1.405 tkm, turnouts by bcm (31nos), loop lines by manually for a total length of 1.916 tkm in special repair den/north/gnt section.sw-v: renewal of switch expansion joints with thick web sejs (twsej) - 10 nos in special repair den/north/gnt section..sw-vi: renewal of glued joints - 45 nos in special repair den/north/gnt section..
Agency / Dept :
South Coast Railway SCOR
Due Date :
Aug 18, 2026
Tender Value :
5.28Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16708111
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for taking down cement or cement lime plaster , taking down steel window or frames , taking down wooden shutter , material and labour for granite work , supply and fixing aluminium windows , supply and fixing factory made single extruded wpc , providing and fixing false ceiling , supply and fixing in repair decorative , material and labour rendering , rendering 10mm thick on fair faces , rendering 15mm thick cement plaster , supply only liquid water proofing , preparation of newly plastered surfaces , preparation of newly plastered surfaces two coats , complete removal of exisiting treatment , complete removal of wall and ceiling exisiting , supply and fixing in repair 5mm thick, add alt of aluminum window celling plaster and painting with connected items in gym, taking down cement or cement lime plaster any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc including cutting of trees shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by engineer in charge., taking down steel window or frames without taking off shutter from frame area exc 1.50 sbut n exc 4 sqm quare metre each including cutting holes for taking out hold fasts or dismantling brick work holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to govt complete all as specified and directed by engineer in charge., taking down wooden shutter of any dscription exc 1.00 square metre but n.exc 2.00 square metre each with all fittings complete all as specified and directed., material and labour for granite work 18 to 20mm thick table rubbed and polished in cooking platforms walls windows cill and gate up to 10 mtr height etc over 10mm thick screed bed in cement mortar 1 ratio 4 including pointing in white cement 1 ratio 2 using marble dust with admixture of pigment to match with old surfaces or shede complete all as per specified and as directed., supply and fixing aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 x 39 mm sideand top of size min 92.34 x 29.70 shutters vertical 39 x 20 mm shutter top and bottom of size min 20x39 mm shutter interlock min size 39x20 mm with rollers and conceled locking arrangements with 5 mm thick tinted glass with rubber gasket brush and aluminium beading aluminium grill with fixing arrangement wt. of grill not less then 2.50 kg sqm aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to is complete all as directed by engr in charge al. section thickness 1.50 mm, supply and fixing factory made single extruded wpc wood polymer composite solid plain flush door shutter of 35mm size comprising of virgin polymer of k value 58 to 60 suspension grade calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 ms having minimum density of 650 kg cum and screw withdrawal strength of 1800 n face and 900 n edge minimum compressive strength 50 n mm2 modulus of elasticity 850 n mm2 and resistance to spread of flame of class a category with property of being termite/borer proof water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws all as per direction of engineer in charge., providing and fixing false ceiling at all heights with grg glass fibre with reinforced gypsum false ceiling tiles semi perforated 12mm thick micro tegular edged grg false ceiling of size 595 x 595 mm of approved texture design and patterns having moisture less than 2 percent humidity resistance of 99percent nrc0.50 to 0.75 as per is 8225 ratio 1987 noncombustible as per bs tiles 4 76 part 4 1970 and light reflectance of 85percent minimum to be laid in true horizontal level suspended on inter locking metal t grid of hot dipped galvanized iron section of 0.33mm thick g, supply and fixing in repair decorative stainless steel tubular curtain rail of 25mm dia and one number of brackets on each end and one no of wall to wall funnal brakest globe valve all on each end which are required on ground of the rod per opening of doors windows make and materail approved by engineer in charge complete all as specified and directed., material and labour rendering 5mm thick on fair faces on concrete surfaces ceiling finished even and smooth without using extra cement on walls in cement mortar 1 ratio 3 complete all as specified and directed by engr in charge., rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on walls in cement mortar 1 ratio 6 complete all as specified and directed by engr in charge., rendering 15mm thick cement plaster in cement mortar 1 ratio 4 on fair face of brick work or concrete surface finished even and smooth without using extra cement with waterproffing compound admixture complete all as specified and as directed., supply only liquid water proofing admixture complete all as specified and directed by engineer in charge., preparation of newly plastered surfaces two coats of distempering with 1st quality acrylic distemper ready mixed having voc content less than 50gms litre of approved manufacturer of required shade and colour complete as per manufacturers specification over a complete all as specified and directed by engr in charge., preparation of newly plastered surfaces two coats overfinishing walls with acrylic smooth exterior paint of required shade two or more coat applied at the rate 1.67 ltr 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg 10 sqm complete all as specifiedand directed by engg in charge., complete removal of exisiting treatment and applying two coats of distempering with 1st quality acrylic distemper ready mixed having voc content less than 50gms litre of approved manufacturer of required shade and colour complete as per manufacturers specification filling gaps by putty after washing rubbing down and stopping complete all as specified and directed by engr in charge., complete removal of wall and ceiling exisiting treatment and applying 1mm coat of plater of paris putty one cote of acrylic smooth exterior paint at the rate 835 ltr 10 sq of required shade over one coat of primer m complete all as specifiedand directed by engg in charge., supply and fixing in repair 5mm thick looking mirror of selected quality with and including stainless steel spacers with bevelled edging any size .complete all as spd and direcetd by engg in charge.
Agency / Dept :
indian army
Due Date :
Aug 24, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rail Joint Repair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rail Joint Repair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rail Joint Repair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rail Joint Repair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rail Joint Repair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rail Joint Repair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rail Joint Repair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rail Joint Repair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rail Joint Repair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rail Joint Repair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rail Joint Repair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rail Joint Repair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rail Joint Repair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rail Joint Repair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rail Joint Repair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rail Joint Repair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rail Joint Repair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rail Joint Repair is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All