sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

62Latest Point machine repair Tenders List

Latest Point machine repair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Point machine repair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Point machine repair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Point machine repair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Point machine repair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Point machine repair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Point machine repair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Point machine repair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Point machine repair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Point machine repair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Point machine repair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Point machine repair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Point machine repair tenders.

Is EMD mandatory for all Point machine repair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Point machine repair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Point machine repair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Point machine repair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16989660
Location : sonitpur , assam
Source : GEM Tenders
NEW TENDER
tender for dustbin , repair of cardio machine , photo frame , towel big , hand towel , door mat , bucket with mug , extension cord , umbrella , double bed sheet , pillows with cover , double blanket , foot mat , towels large , towels small , bucket 20 ltrs , mug , heat pillar , borosil glass , dinner set , electric kettle , cup and saucers , serving tray , hot case 5 containers , case roll 1.5 , dust bin 5 ltrs , dining table mats , tea thermos , split ac 1 point 5 ton voltas with wall bracket , stabilizer 4kva , curtains , repair of grass cutting machine , trimmer , wooden table , acrylic board, dustbin, repair of cardio machine, photo frame, towel big, hand towel, door mat, bucket with mug, extension cord, umbrella, double bed sheet, pillows with cover, double blanket, foot mat, towels large, towels small, bucket 20 ltrs, mug, heat pillar, borosil glass, dinner set, electric kettle, cup and saucers, serving tray, hot case 5 containers, case roll 1.5, dust bin 5 ltrs, dining table mats, tea thermos, split ac 1 point 5 ton voltas with wall bracket, stabilizer 4kva, curtains, repair of grass cutting machine, trimmer, wooden table, acrylic board
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16989378
Location : dimapur , nagaland
Source : GEM Tenders
NEW TENDER
corrigendum tender for pcc cement grade 43 make as per annx i of ts , coarse sand , 20mm aggregates , 40mm aggregates , hardcore 63mm stone aggregates , stone boulders , pcc solid block 400 into 200 into 200mm , crs steel bar fe 550 grade 8mm dia make as per annx i of ts , crs steel bar fe 550 grade 12mm dia make as per annx i of ts , water proofing compound , water proof plywood 8 into 4 feet into 18mm thick make as per annx i of ts , plywood12mm thick size of 8 into 4 feet into 12mm , wooden scantling 50mm into 50mm into 3 mtr long , nails assorted size 2 inch 3 inch and 4 inch , binding wire zero point 9mm , white cement , 110mm dia pvc pipe ldpe of rating 6 kg per cm2 for weep holes , concrete mixture machine titling type max engine or motor speed 1440 rpm capacity of water 35 ltr power input 7 point 5 hp make as per annx v of ts , penetrometer make as per annx v of ts , digital vernier calliper zero to 150mm make as per annx v of ts , digital screw gauge micrometer make as per annx v of ts , weighing machine heavy duty 200 kg capacity make as per annx v of ts , weighing machine digital 10 kg capacity make as per annx v of ts, provision of structure items construction mtrls tools and plant items for veh repair ramp, pcc cement grade 43 make as per annx i of ts, coarse sand, 20mm aggregates, 40mm aggregates, hardcore 63mm stone aggregates, stone boulders, pcc solid block 400 into 200 into 200mm, crs steel bar fe 550 grade 8mm dia make as per annx i of ts, crs steel bar fe 550 grade 12mm dia make as per annx i of ts, water proofing compound, water proof plywood 8 into 4 feet into 18mm thick make as per annx i of ts, plywood12mm thick size of 8 into 4 feet into 12mm, wooden scantling 50mm into 50mm into 3 mtr long, nails assorted size 2 inch 3 inch and 4 inch, binding wire zero point 9mm, white cement, 110mm dia pvc pipe ldpe of rating 6 kg per cm2 for weep holes, concrete mixture machine titling type max engine or motor speed 1440 rpm capacity of water 35 ltr power input 7 point 5 hp make as per annx v of ts, penetrometer make as per annx v of ts, digital vernier calliper zero to 150mm make as per annx v of ts, digital screw gauge micrometer make as per annx v of ts, weighing machine heavy duty 200 kg capacity make as per annx v of ts, weighing machine digital 10 kg capacity make as per annx v of ts
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17000921
Location : chandigarh , chandigarh
NEW TENDER
tender for construction of additional road gullies and machine holes and repairing of existing road gullies v3 road grain market tee point to near sant kabir public school at sector 26 chd under the jurisdiction of sde mcph sub div no 12 chd ch to revenue head
Agency / Dept :
municipal corporation
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
1.91L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16931415
Location : avadi , tamil nadu
LIVE TENDER
tender for repair and replacement of spares in shredder machine and providing lcv charger point at kalaignar nagar and pound street mcc in ward no 12
Agency / Dept :
municipal corporation
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
3.3L
View Documents
T18 Ref No : 16877056
Location : ameerpet , telangana
Source : GEM Tenders
LIVE TENDER
tender for repair, maintenance, and installation of plant/ systems/equipments (version 2) - 3 years cmc of 100ma x- ray machine, make: allengers, model: mars 4 point 2 in the hospital; medical equipment and devices; service provider
Agency / Dept :
employees state insurance corporation ESIC
Due Date :
Sep 10, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16874936
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for material and labour for testing , supply and fixing in replacement of ht , supply and fixing in replacement , supply and fixing in replacement of hrc , supply and fixing in replacement of aluminium , supply and fixing in replacement of 11kv , supply and fixing in replacement of , supply and fixing cable jointing kit , supply and fixing cable jointing kit for 11 kv , excavation in trenches not , returning filling in including , removing excavated material from , sand cushioning 8 cm before , supply and fixing unreinforced, restoration of tech area power house supply and connected items, material and labour for testing of faulty ht cable by using ht high voltage fault locating machine and finding the fault and to be repaired the same including all t and p as required on site complete all as directed., supply and fixing in replacement of ht underground cable xlpe insulated pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with earthed stranded aluminium conductor 11000 volts grade cross sectional area 150 sqmm 3 core laid in duct trenchalong pole etc including making connection complete all as specified, supply and fixing in replacement of complete fuse trip mechanism suitable for on load break switch 3 phase 630a, supply and fixing in replacement of hrc fuses with tripping striker pin 11kv suitable amps, supply and fixing in replacement of aluminium busbar 50 x 12mm suitable rating 3p air insulated with colour coded ryb heat shrinkable sleeves, supply and fixing in replacement of 11kv vcb ct, supply and fixing in replacement of 11kv vcb pt, supply and fixing cable jointing kit for 11 kv earthed grade cable for out door end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured al conductor cable of size 150 sq mm complete all as specified, supply and fixing cable jointing kit for 11 kv earthed grade cable for straight through joint heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 150 sq mm complete, excavation in trenches not exc 1.5 metres wide and not exc1.5 metres deep for pipe line foundation of poles stays taking out and laying of cables etc in any type of soil getting out and levelling of bottom surface to required level all as specified, returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm thick all as specified, removing excavated material from site to a distance not exc 50 metres away and depositing where directed not exc 1.5 metres from the starting point all as directed, sand cushioning 8 cm before laying ht lt underground cable in trenches and 15 cm after the cable is laid and all as specified and directed, supply and fixing unreinforced precast concrete cable cover class hv type-1 size 300 x 180 x 40mm complete
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16874961
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for rewind of submersible motor 7.5 hp , sub cable 4 sqmm 3 core complete. , gm bearing bush , water seal , cable seal , revolving disc , sand guard , dol bush , dol sleave , ss distance sleeve , rottar sleeve turning and grinding , coupling key , impellar key , t nut , guide bush , gm neck ring , nut bolts with washer , rubber packing flange of size 150 mm , cable jointing kit , painting of submersible pump set , ms column pipe 100 mm dia medium grade , labour charges for taking out and relowering , labour charges for opening cutting rewinding , supply installation testing and commissioning , material and labour for making , attending day to day emergency breakdowns , attending day to day emergency breakdowns complaints of damaged , material and labour pcc 1 , supply and fixing rotational moulded , material and labour for disconnecting , supply only anti friction heavy duty , material and labour for removing swt column pipes , material and labour for earthing , supply laying 50 mm bore steel water , supply and fixing in replacement , excavation in trenches not , returning filling in including spreading leveling , removing excavated soil to a distance, repair and replacement to submersible pump set, rewind of submersible motor 7.5 hp, sub cable 4 sqmm 3 core complete., gm bearing bush, water seal, cable seal, revolving disc, sand guard, dol bush, dol sleave, ss distance sleeve, rottar sleeve turning and grinding, coupling key, impellar key, t nut, guide bush, gm neck ring, nut bolts with washer 1 by 2 x 2 inch, rubber packing flange of size 150 mm, cable jointing kit, painting of submersible pump set, ms column pipe 100 mm dia medium grade of 3 mtr in length, labour charges for taking out and relowering the sub pump set from bore well, labour charges for opening cutting rewinding cleaning complete the sub pump for repairing and refixing the same after repairing, assembling testing complete, supply installation testing and commissioning in repairs of sathya sai dosing drum adjustable dozing pump including fixing complete, material and labour for making 100 percentage serviceable to the amf lt panel startor suitable for motors and submersible pump by tracing out defects and replacing unsv parts including control wiring complete. minor parts such as nuts, bolts, washers, thimbles etc shall be deemed to be included in the quoted rate., attending day to day emergency breakdowns complaints of damaged water supply lines of 15 to 25mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply., attending day to day emergency breakdowns complaints of damaged water supply lines of 40mm to 50mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply, attending day to day emergency breakdowns complaints of damaged water supply lines of 80mm to 150mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply, material and labour pcc 1 ration 3 ratio 6 type c1 using 20 mm graded stone aggregate for platform of motor and water storage tank size 1.5 x 1.5 x 0.4m etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete., supply and fixing rotational moulded polyethylene water storage tank inner and out white five layers isi marked cylinderical vertical with closed top hoisted with threaded cap and fixed of capacity 2000 liters each including all accessories including taking down of old broken water tank complete., material and labour for disconnecting and removing the squirrel cage 3 phase 415 volts 50 hz induction motor of 7.5 hp capacity from its foundations by disconnecting electrical connections and motor couplers taking it to workshop for repair and dismantling and opening up of motor removing burnt out winding wires complete cleaning startor and rotor assembly, supply only anti friction heavy duty bearings suitable for 7.5 hp., material and labour for removing swt column pipes upto 100 mm dia with submersible flat cable of any type and dismantling and taking up down submersible pump and motor assembly of capacity 7.5 hp shifting to workshop and removing unserviceable spares replacing with new spares such impeller bushes distance bush seal etc of same specifications type model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets assembling back and testing for proper function including necessary machining works as required bringing back and reinstalling into the swt complete., material and labour for earthing in repalcement complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to and including 25 x 4 mm galvanised earth strip by means of bolts nuts check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical, supply laying 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths laid in trenches complete with all fittings such as bends elbows tee short pieces connectors back nuts diminishing pieces caps and plugs unions etc including taking down old unsv pipe any type complete, supply and fixing in replacement direct on line starter in sheet metal enclosure for motor rating 415 volts 3 phase 50 hz 9-14 amps relay maximum range of capacity 7.5 hp complete, excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft loose soil complete, returning filling in including spreading leveling watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete, removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16898346
Location : rawatbhata , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; up to 2 point 5 kw /3 hp rating duct mounted ventilation fan motors overhauling located inside the reactor building / radioactive area at different f.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 2 point 5 kw/3 hp and upto 5 point 5 kw/7 point 5 hp rating duct mounted ventilation fan motors overhauling located inside the reactor buil.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; up to 2 point 5 kw /3 hp rating foot mounted motors overhauling located inside the reactor building / radioactive area at different floors (total qua.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 2 point 5 kw/3 hp and upto 5 point 5 kw/7 point 5 hp rating foot mounted motors overhauling located inside the reactor building/radioactive.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 5 point 5 kw/7 point 5 hp and upto 7 point 5 kw/10 hp rating foot mounted motors overhauling located inside the reactor building/radioactiv.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 7 point 5 kw /10 hp and up to 11 kw/ 15 hp rating foot mounted motors overhauling located inside the reactor building/radioactive area at d.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 11 kw /15 hp and up to 15 kw/20 hp rating foot mounted motors overhauling located inside the reactor building / radioactive area at differe.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 15 kw /20 hp and up to 22 kw/30 hp rating foot mounted motors overhauling located inside the reactor building / radioactive area at differe.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 22 kw /30 hp and up to 30 kw/40 hp rating foot mounted motors overhauling located inside the reactor building / radioactive area at differe.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; up to 2 point 5 kw /3 hp rating foot mounted motors overhauling located outside the reactor building / non-radioactive area at different floors (tota.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 2 point 5 kw/3 hp and up to 5 point 5 kw/7 point 5 hp rating foot mounted motors overhauling located outside the reactor building/non-radio.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 5 point 5 kw/7 point 5 hp and upto 7 point 5 kw/10 hp rating foot mounted motors overhauling located outside the reactor building/non-radio.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 7 point 5 kw /10 hp and up to 11 kw/15 hp rating foot mounted motors overhauling located outside the reactor building / non-radioactive are.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 11 kw /15 hp and up to 15 kw/20 hp rating foot mounted motors overhauling located outside the reactor building / non-radioactive area at di.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 15 kw /20 hp and up to 22 kw/30 hp rating foot mounted motors overhauling located outside the reactor building / non-radioactive area at di.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; more than 22 kw /30 hp and up to 30 kw/40 hp rating foot mounted motors overhauling located outside the reactor building / non-radioactive area at di.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; re-metalizing of up to 1 point 5 kw motor shaft using tafa arc technique after preparation of surface and machining to proper size (total quantity 1 .. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; remetalizing of more than 1 point 5 kw up to 7 point 5 kw motor shaft using tafa arc technique after preparation of surface and machining to proper .. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; re-metalizing of more than 7 point 5 kw up to 15 kw motor shaft using tafa arc technique after preparation of surface and machining to proper size (t.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; remetalizing of more than 15 kw up to 45 kw motor shaft using tafa arc technique after preparation of surface and machining to proper size(total qua.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; re-metalizing of up to 1 point 5 kw motor end cover using tafa arc technique after preparation of surface and machining to proper size (total quantit.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; re- metalizing of more than 1 point 5 kw up to 7 point 5 kw motor end cover using tafa arc technique after preparation of surface and machining to pro.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; re-metalizing of more than 7 point 5 kw up to 15 kw motor end cover using tafa arc technique after preparation of surface and machining to proper siz.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; re- metalizing of more than 15 kw up to 45 kw motor end cover using tafa arc technique after preparation of surface and machining to proper size (tota.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; dynamic balancing of motor rotor with 2 point 5 microns accuracy having weight more than 1 kg up to 4 kg (total quantity 1 is equal to 02 nos for con.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; dynamic balancing of motor rotor with 2 point 5 microns accuracy having weight more than 4 kg up to 16 kg (total quantity 1 is equal to 02 nos for construction of .. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; dynamic balancing of motor rotor with 2 point 5 microns accuracy having weight more than 16 kg up to 48 kg (total quantity 1 is equal to 04 nos for c.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; dynamic balancing of motor rotor with 2 point 5 microns accuracy having weight more than 48 kg up to 96 kg (total quantity 1 is equal to 04 nos for c.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; replacement of damage pvc cooling fan for motors having rating up to 1 point 5 kw (total quantity 1 is equal to 04 nos for contract duration); as per.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; replacement of damage pvc cooling fan for motors having rating more than 1 point 5 kw up to 7 point 5 kw (total quantity 1 is equal to 08 nos for con.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; replacement of damage pvc cooling fan for motors having rating more than 7 point 5 kw up to 15 kw (total quantity 1 is equal to 05 nos for contract d.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; replacement of damage pvc cooling fan for motors having rating more than 15 kw up to 45 kw (total quantity 1 is equal to 02 nos for contract duration.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; supply of 6205 zz skf make deep groove ball bearing (total quantity 1 is equal to 20 nos for contract duration); as per scope of work and atc , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; supply of 6206 zz skf make deep groove ball bearing (total quantity 1 is equal to 20 nos for contract duration); as per scope of work and atc , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; supply of 6207 zz skf make deep groove ball bearing (total quantity 1 is equal to 04 nos for contract duration); as per scope of work and atc , repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; supply of 6208 zz skf make deep groove ball bearing (total quantity 1 is equal to
Agency / Dept :
nuclear power corporation of india limited NPCIL
Due Date :
Sep 10, 2026 (10 days left)
Tender Value :
29L
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16819935
Location : new delhi , delhi
LIVE TENDER
auction or scrap of lot no - 1 lot name - pp granules, etc, cont no-dxbu5122120- cargo in cont- cxdu2395868/40 product type - container category - can/tin pp granules (160 bags approx) (4000 kgs approx) date of packing : dec 2023 date of expiry : dec 2025 1 bag net weight : 25 kgs container no : dxbu5122120- cargo in cont- cxdu2395868/40 approx wt. in kgs : 3975 kgs approx pkg : 160 bags approx arrival date :10.02.2024 size :20 contact no : 9650034798 | lot no - 2 lot name - novairmachine, etc, cont no- msmu6583684 product type - container category - can/tin novairmachin e- 16no.modelnu mber-hp- 45is6no, b)- atsf450-1no, c)- vl4550- 2rn1+p- 9no,machines. container no : msmu6583684 approx wt. in kgs : 10270 kgs approx pkg : 16pallet arrival date :21.03.2023 size :40 contact no : 9650034798 remarks : require epr registration from cpcb | lot no - 3 lot name - dolomite packed in jumbo bags,etc ,cont no- mrku9264029 product type - container category - can/tin dolomite packed in jumbo bags,as per lab report the sample is in the form of off- white powder. it is mainly composed of calcium carbonate & magnesium carbonate together with small amount of oxides of aluminium, iron & silicon. container no : mrku9264029 approx wt. in kgs : 12480 kgs approx pkg : 1 lot arrival date :12.02.2023 size :20 contact no : 9650034798 remarks : spcb/pcb if used in steel/ferro alloy industry | lot no - 4 lot name - multicolour, etc, cont no-hlxu8315264 product type - container category - can/tin multicolour unstitched fabric rolls different colour & weight different colour & weight 1 roll = 24.7 /24.3/25.6/ kgs width : 147 cm container no : hlxu8315264 approx wt. in kgs : 23620 kgs approx pkg : 1lot arrival date :28.10.2016 size :40 contact no : 9650034798 remarks : report from textile committee (ttc) and noc for azo dyes | lot no - 5 lot name - old clothes mutilated, etc, cont no- dfsu7070955 product type - container category - can/tin old clothes mutilated condition container no : dfsu7070955 approx wt. in kgs : 4610 kgs approx pkg : 1 lot arrival date :20.08.2016 size :40 contact no : 9650034798 remarks : proper fumigation | lot no - 6 lot name - helical rotary liquid, etc, cont no- pciu8819812 product type - container category - can/tin helical rotary liquid chillers train model : rthdd3f2f3 mfg. date : 11/2015 mfg. by : trane air conditioning systems (china) construction of ltd. container no : pciu8819812 approx wt. in kgs : 12500 kgs approx pkg : 1 lot arrival date :09.02.2016 size :40 contact no : 9650034798 remarks : epr by cpcb under e waste mangement rules 2022 | lot no - 7 lot name - cements, etc, cont no- cxdu1014057 product type - container category - can/tin cements brand : shree ultra most of the bags are in solid forms. container no : cxdu1014057 approx wt. in kgs : 11090 kgs approx pkg : 1 lot arrival date :10.09.2014 size :20 contact no : 9650034798 remarks : proper fumigation | lot no - 8 lot name - oil packed in ms drums, etc, cont no- gldu2946786 product type - container category - can/tin oil packed in ms drums as per the crcl lab report the sample is in the form of black colored oily liquid. it is composed of mineral hydrocarbon oil, having more than 70% by wt. of mineral hydrocarbons, having following constants : cidity, inorganic = nil ash, percent by mass, max = 0.83density at 15°c (kg/m3)=890.8 flash point (coc) °c =h85194.0 kinematic viscosity at 50°c cst =76.748 kinematic viscosity at 100°c cst =15.126 sediment (% by mass), max =0.10 water content (% v/v), max = container no : gldu2946786 approx wt. in kgs : 19085 kgs approx pkg : 1 lot arrival date :04.06.2014 | lot no - 9 lot name - soil packed, etc, cont no- caiu2226766 product type - container category - can/tin soil packed in plastic bags container no : caiu2226766 approx wt. in kgs : 10400 kgs approx pkg : 1 lot arrival date :27.06.2013 size :20 contact no : 9650034798 | lot no - 10 lot name - completely mutilated rags, etc, cont no- blju2032350 product type - container category - can/tin completely mutilated rags condition of the cargo is very bad container no : blju2032350 approx wt. in kgs : 7455 approx pkg : 1 lot arrival date :18.06.2012 size :20 contact no : 9650034798 remarks : the required condition is that rags to be considered as completely mutilated should be totally unserviceable and beyond repair and this can be ensured by applying criteria of theree cuts or more, through the entire length of the garment, in a cirsscross manner, not along the seams.as per the cbec circular 36/2000 dtd. 08.05.2000 accordingly goods | lot no - 11 lot name - oil packed in ms drums, etc, cont no- fscu3890669 product type - container category - can/tin oil packed in ms drums. as per the crcl lab report the sample is in the form of blackish oily liquid. it is composed of mixture of mineral hydrocarbon oil about 50% by wt. along with other additives having following constants : kinematic viscosity at 40°c =129.63 cst kinematic viscosity at 100°c =15.670 cst viscosity index = 126.60 density (gm/cm3) = 0.9145, gravity 15°c = 23.08 ash content = 0.46% total pah = 10.745 ppm (0.0011%).total pcp = not detected, container no : fscu3890669 approx wt. in kgs : 19600 kgs approx pkg : 1 lot arrival date :15.04.2011 | lot no - 12 lot name - lead base ceramic glazes, etc, cont no- fscu3360458 product type - container category - can/tin lead base ceramic glazes powder as per chemical composition as per lab report the sample is in the form of grayish coarse powder. it is mainly composed of oxides of lead, potassium & zinc along with small amount of cadmium & silicious matter. ash (900°c) = 49.2% by wt. container no : fscu3360458 approx wt. in kgs : 20380 kgs approx pkg : 1 lot arrival date :18.05.2004 size :20 contact no : 9650034798 remarks : epr, pcc/spcb | lot no - 13 lot name - assorted mix items, etc, cont no-tclu8637924 product type - container category - can/tin assorted mix items a) baby stroller (290 ctns approx) 1 ctn = 2 pcs/total | lot no - 14 lot name - old & used machine, etc, cont no- msku8748099 product type - container category - can/tin old & used machine & accessories roller, wooden pallets model, make, mfg date are not available container no : msku8748099 approx wt. in kgs : 8810 kgs approx pkg : 1 lot arrival date :11.12.2010 size :40 contact no : 9650034798 remarks : no objection for auction subject to condition that the imported goods are capital goods as per ftp para 2.3.1. please ensure that goods are other than e- waste. | lot no - 15 lot name - mattress cover & packing materials, etc, cont no-bmou2331782 product type - container category - can/tin mattress cover & packing materials different colour & sizes 1 bdl = 20 pcs total | lot no - 16 lot name - medical equipment, etc, cont no-fciu3210280 product type - container category - can/tin medical equipment brand : novaira) (a) refrigeration dryer (07 nos) type : ats- f 450 date : 04.03.2022 (b) empty tank (01 no) capacity : 900 litr air container no : fciu3210280 approx wt. in kgs : 2020 kgs approx pkg : 1 lot arrival date :01.10.2023 size :20 contact no : 9650034798 remarks : with respect of refrigeration if ods then dgft licence required otherwise free and may be auctioned | lot no - 17 lot name - old & used heavy electric machine, etc, cont no-tghu9092788 product type - container category - can/tin old & used heavy electric machine model, make, mfg date are not available container no : tghu9092788 approx wt. in kgs : 16720 kgs approx pkg : 1 lot arrival date :02.06.2009 size :40 contact no : 9650034798 remarks : ce certificate and e- waste certificate is required | lot no - 18 lot name - knitted woollen scarf, etc, cont no- pmlu9013092 product type - container category - can/tin knitted woollen scarf 1 ctn net weight :- 18-00kg 1 ctn gross weight :- 20-00 kg 1 ctn = 100pcs total
Agency / Dept :
container corporation of india limited CONCOR
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Point Machine Repair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Point Machine Repair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Point Machine Repair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Point Machine Repair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Point Machine Repair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Point Machine Repair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Point Machine Repair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Point Machine Repair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Point Machine Repair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Point Machine Repair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Point Machine Repair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Point Machine Repair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Point Machine Repair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Point Machine Repair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Point Machine Repair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Point Machine Repair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Point Machine Repair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Point Machine Repair is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All