sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

14Latest Mirror positioning system Tenders List

Latest Mirror positioning system Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Mirror positioning system tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Mirror positioning system tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Mirror positioning system Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Mirror positioning system tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Mirror positioning system Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Mirror positioning system Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Mirror positioning system Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Mirror positioning system tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Mirror positioning system Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Mirror positioning system sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Mirror positioning system tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Mirror positioning system tenders.

Is EMD mandatory for all Mirror positioning system tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Mirror positioning system work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Mirror positioning system tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Mirror positioning system Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16952779
Location : pune , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for furniture and soft furnishing dinner plate , quarter plate , rice plate , donga and lid , donga without lid , soup bowl with spoon and quarter plate , curry bowl , tea set , cup with saucer , glass stainless steel , glass borosil small , glass borosil large , water glass , water jug borosil , salt and pepper set bc , donga steel , gas stove heavy duty single burner , lemon squasher , pressure cooker 1 , pressure cooker 2 , pressure cooker 3 , kadai hardlium , tawa hardlium , dosa tawa med size , parat ss greaterthan 18 inch , parat ss lessthan 18 inch , sauce pan ss large , sauce pan ss med , fry pan med , jarha ss , tea container 5 ltr cap , vegetable scrapper , potato peeler , kitchen knife set of 04 , milk container ss 5 ltr cap , rice stainer ss , storage container 1 , storage container 2 , storage container 3 , storage container 4 , storage container 5 , storage container 6 , storage container 7 , masala box ss , water bottles , gas lighter , induction cook top , casserole 1 , casserole 2 , degchi aluminium 1 , degchi aluminium 2 , serving trays large , serving trays medium , coaster plates , desert fork , butter knife ss , serving spoon ss , rice spoon ss , desert spoon ss , tea spoon ss , flask 1 ltr ss , full plate , rice plate , donga with lid , soup bowl with spoon and quarter plate , coffee maker , food warmer ss , water purifier with ro system , mixure cum juicer , wet grinder , toaster 4 slice , water dispenser , microwave oven 20 ltr , refrigerator 1 , refrigerator 2 , deep freezer , ice box , garbage bin , rack steel , dining clothes , table mats , emergency light , fly insect killer machine , napkin holder , vegetable cutting , steel almirah 1 , steel almirah 2 , tandoor , bath mug , bath stool , soap case , tooth brush holder , single bed sheet , bed sheet double with 02 pillow , bed cover single , bed cover double , blanket single bed , blanket double bed , pillow foam , quilt 1 , quilt 2 , quilt cover 1 , quilt cover 2 , bath towel , hand towel , mattress , pen stand , slippers , door mat 1 , clothes stand , locks for door , hanger , decorative wall clock , mosquito repllent machine , heat convector-halogen room heater , audio video visual equiment , water flask , artefacts , curtains , wifi point modern , single bed , double bed , bed side table , study table , luggage rack , wardrobe , dressing mirror , bed room chair , notice board , electric iron heavy duty , iron table , key board , shoe shiner- polish machine , first aid kit , washing machine , garden chairs , designer reception counter , revolving and tilting reception chair , dining table , dinning chair , center table , electric gyeser , ceiling fan , exhaust fan 1 , exhaust fan 2 , wall mounted fan, bone china with drdo coloured logo, bone china with drdo coloured logo of approved quality make, bone china with drdo coloured logo of approved quality make, melamine- melmoware, superior qualiity etc all complete with drdo coloured logo., vip tea set bone china with drdo logo set with six cups & saucer bone china with drdo monogram, approved qualiity made in bone china etc all complete with drdo logo coloured, glass stainless steel capacity 300 ml, height 105 mm, outer dia 90 mm all as spd., soft drink glass borosilicate small capacity 210 ml, glass water borosilicate 350ml capacity borosil, water glass medium size make milton, treo or equivalent, water jug borosilicate with lid of capacity 1500-2000 ml of wall thickness 2.8 mm, bone china salt and pepper set with drdo logo, donga steel material stainless steel, height 4 inch, width 8 inch capacity 700ml., gas stove - lpg , no of burner-01, material of body cl, material of nozzle and plug - ss304,, lemon squasher made from high quality food grade stainless steel of size 20x606x4 cm, 7.5 ltr cap hawkins or eqvt, 5.0 1ltr cap hawkins or eqvt, 3.0 1ltr cap hawkins or eqvt, kadai hardlium, tawa hardlium, medium size, parat big size stainless steel of is 5522-1992, outer diameter of parat 528 mm, height of parat 75 mm, parat big size stainless steel of is 5522-1992, outer diameter of parat 400 mm, height of parat 61.5 mm, sauce pan of 19 cm outer diameter, 8 cm height, sauce pan of 18 cm outer diameter, 7.5 cm height, fry pan of 21cm outer diameter, 4.5 cm height, material-ss as per is 5522-1922 thickness-1 mm, length 300 mm dia of pona dish 130150mm, tea containers 5l stainless steel hot water kettle pot, vegetable scrapper stainless steel kadukas size 8 x 10 inch, potato peeler stainless steel body and blade material stainless steel, kitchen knife set of 4 big plain blade, blade stainless steel 304, stainless steel 5 ltr capacity, rice strainer stainless steel dia 300 mm, depth 100 mm, thickness 0.7 mm, storage container ss cap 20 kg with lid, storage container ss cap 10 kg with lid, storage container ss cap 5 kg with lid, storage container ss cap 1 kg with lid, storage container ss cap 2 kg with lid, storage container plastic 2 kg made from high quality food grade plastic, storage container plastic 1 kg made from high quality food grade, masala box stainless steel with lid containing six small bowls for storage of masala condiments, plastic for refrigerator, gas liohter stainless steel 300 mm length, make prestige or eqvt voltage -220-240 volts power 2100 watt, casseroles stainless steel capacity - 2 ltr, casseroles stainless steel capacity - 1 ltr, degchi aluminium 18 inch with lid, degchi aluminium 12 inch with lid, plastic serving tray acrylic of size 500mm x 410 mm x 6 mm, plastic serving tray acrylic of size 335 mm x 210 mm x 6 mm, set of 6 pcs with stand 90-100 mm dia, stainless steel, table knife, type of blade - plain stainless steel, serving spoon stainless steel ss 304, rice spoon stainless steel rice serving spoon features food-grade material, a length of 22 cm to 28 cm, dessert spoons stainless steel ss 304, tea spoons stainless steel ss 304, material - stainless steel 304 ss, capacity 1000 ml, melamine - melmoware, soup bowl with spoon and quarter plate melamine - melmoware, coffee maker espresso coffee machine isi standard, food warmer ss roll top chafing dish 5-6 ltr cap buffet supplies, supply installation of fully automatic ro based water purifier, power 1200-1500 watt material 3 jars ss 304, rpm-18000, type of machine- drum stone roller type wet grinder, 750 watt pop up toaster four slice, type of control- thermostat, voltage -220-240 volts, water dispenser with 10 ltr cap, microwave oven 20 ltr , grill heating power - 201-250watt operating voltage -201-210 volts, refrigerator storage volume-310 ltr, type of door- double, refrigerator storage volume-180 ltr, type of door- single, deep freezer position of door - top opening, storage volume -250 ltr, ice box plastic, garbage bin large plastic 120ltrs with handle, two wheels and lid, rack steel with 3 shelves, dining clothes 2.5m x 1.5m, table mats of size 45x30 cm, emergency light 8 watt led, max emergency illumination time 60 min, length 24-260cm, height 12-14 cm width 12-14 cm, fly insect killer machine double rod make avro wattage 80, operating voltage 220, fibre glass body material, napkin holder stailess steel length 18 cm and height 10.5 cm, vegetable cutting tray plastic chopping board food grade with anti slip mat pad of size 34cm x24 cmx2 mm, large size material of almirah doors ms sheet, small size height 1155 mm+ or - 10 mm, medium size heat fuel lpg, tandoor material outer body stainless steel 304, bath mug 1 ltr of superior qaulity and shade make cello, milton, naysa, bathroom stool, dimension 34 cm x 34 cm x 21 cm, soap case plastic with lid made with tough and durable plastic, tooth brush holder made with 304 stainless steel, single bed sheet with pillow cover of superior quality make bombay deyeing, raymonds, bed sheet double with 2 pillow cover, light colour printed, of size 275x230 cm, bed cover single cotton sateen fabric of size 2.28x1.52 mtr, bed cover double bed of size 2.28x2.28m, supply of heavy duty blanket single size - 230 x152 cm , mass - 700 grm per sqm, blanket double bed size - 230x260cm , mass - 700 grm per sqm, fibre pillow of size 700x 400x170 mm, body fabric cloth plain weaves polyster cotton, quilt size single bedding quilt size 220x150 cm, quilt size double of size 220x240 cm for double bed, quilt cover of single bedding of size 228 cm x 152 cm, quilt cover cotton for double bed of size 228x240 cm, bath towel large size , towel size- 75 cmx 150 cm with max heading or depth 6.5 cm, hand towel bleached white size 60cm x 40cm, mattress double thick 6 inch , mattresses double bed of size 72x72x6 inch, pen stand material- plastic, slippers 2-3 gents, 1-3 ladies polyurethene in sole- anti skid gents size 9,8 and 7 and ladies size 5 and 6, door mat welcome for each room pvc mat of thickness 10-12 mm, door mat cushions soft for toilet doors, cloth dryer stand, made of stainless steel max load 20 kg no of tiers 2, height 58.5cm, brass 5 to 7 leaver locks for door approved make i.e harrison, godrej etc., hanger plastic for cloth garments size 35 centimeter, decorative wall clock approved size and design etc all complete, mosquito repllent machine make -allout- goodnight or techno commercial equivalent, heat convector-halogen room heaterheating element -1200 watt, voltage -230 volts tower type, 32 inch colour smart television led 32 inch fhd of brightness 300-399, reolution pixels 1920x1080,, water flask 500 ml stainless steel make - cello - milton, artefacts 600x600mm, curtains approved quality including polyester lining, top with buckram backing, wifi point modern make -airtel, wooden single bed size 1950 x 930 x 400 mm, wooden double bed size 2050mm x1850mm x 450mm h, bed side table size 450 x 450 x 400mm, study table size 900x525x750mm, luggage rack size 750 x 525 x 450 mm, wardrobe made from 19mm ply with 1mm thick laminate on all surfaces, installation of gents dressing mirror size 525 x 200 x 250 mm, bed room chair with arm rest made out of teakwood frame work, supply and fixing of notice board 4x3 feet made of laminated sheet, electric iron heavy duty electric iron rating 1100 watt, customised iron table size 1050mm x 600mm with top, supply and fixing of key board width of board 600mm colour of cloth red-green height 900mm, shoe shiner- polish machinebody material- ss suitable for- black and brown shoe operating mode sensor, first aid kit ss of size 30 cm x45 cm x12 cm, washing machine semi auto 08 kg capacity make- lg, plastic-garden chairs 2 each room dimensions- h 31.7 x w 22.8 x d 18.5 inch, supply and fixing of designer reception counter of 1050 mm height made out of 18mm, superior quality of size 515 x 515 x 900 mm, supply of 08 seater dining table size 1800 x 1050x750mm made out of teak wood frame, dinning chair size 475 x 400 x 780mm made out of teak wood frame, center table size 1050 x 525 x 450 mm, supply and installation of 15 ltr storage electric gyeser, 1200mm sweep ceiling fan of 230v, 50 hz, single phase 3 star, 200mm pvc exhaust fan of 230 v, 50 hz, single phase anti dust, high speed and low noice copper wounded exhaust fan, 300mm exhaust fan for kitchen of 230v, 50hz, single phase louvers type, high speed and low noice copper wounded exhaust fan, wall mounted fan with 5 speed control of 300mm swing size
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
49.38L
View Documents
T18 Ref No : 15675812
Location : pune , maharashtra
Source : GEM Tenders
tender for echs re 21 3d printed patient specific anatomy model abs material with spine as per spec , carbon fibre halo ring system for skull traction with compatible, all sizes , neurosurgical patties 10 x 15 mm , neurosurgical patties 20 x 20 mm , bone wax sterile packing isopropyl palmitate with bee wax , match head cutting burr 3 mm compatible with 14 cm angled as per spec , match head cutting burr 3 mm compatible with 10 cm angled as per spec , match head cutting burr 3 mm compatible with 9 cm straight as per spec , diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system , diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system , neck positioning sponge with mirror spine pillow, head positioner , sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec , fibrin glue 2ml kit with fibrin and sealant , drape for spine endoscopic surgery , sterile drape for zeiss microscope , hemostatic agent made from oxidized regenerate cellulose orc fibrillar , lodine impregnated antimicrobial incise drape 66 cm x 45 cm, echs re 21, 3d printed patient specific anatomy model abs material with spine as per spec, carbon fibre halo ring system for skull traction with compatible, all sizes, neurosurgical patties 10 x 15 mm, neurosurgical patties 20 x 20 mm, bone wax sterile packing isopropyl palmitate with bee wax, match head cutting burr 3 mm compatible with 14 cm angled as per spec, match head cutting burr 3 mm compatible with 10 cm angled as per spec, match head cutting burr 3 mm compatible with 9 cm straight as per spec, diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system, diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system, neck positioning sponge with mirror spine pillow, head positioner, sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec, fibrin glue 2ml kit with fibrin and sealant, drape for spine endoscopic surgery, sterile drape for zeiss microscope, hemostatic agent made from oxidized regenerate cellulose orc fibrillar, lodine impregnated antimicrobial incise drape 66 cm x 45 cm
Agency / Dept :
indian army
Due Date :
Jun 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15792962
Location : gorakhpur , uttar pradesh
Source : GEM Tenders
tender for viscosity apparatus , youngs modulus , vernier callipers ime type , metallic sphere with hook , zener diode characteristics apparatus , pn junction diode chartersics apparatus , transistor characterstics apparatus pnp and npn , study of logic gate apparatus , friction board apparatus , thermometer 220 f , fraction weight box , plier taparia , screw driver set multipurpose , transformer step up and step down , led 2 watt , inclined plane , milli ammeter , milli voltmeter , ohms law apparatus , retort stand with clamp and bose head , helical sprinf slinky , split cork , travelling microscope , spirit level small , overflow cane , one way key , two way key , four way key , jockey , constantan wire , magnesium wire , watch glass 3 inch , watch glass 2 inch , hanger with weight 50 gm , newton colour disc , spirit lamp , tornedo working model , archmedies principle working model , hand generator working model , solenoid engine working model , electric mlotor working model , magnetic induction working model , domestic circuit parallel working model , domestic circuit series working model , battery eliminator 2 amp , magnetic compass medium size , wire cutter stripper cutter , dry cell charger , rehostat 50 ohm , rehostat 100 ohm , telescope , battery 6 volt , 9 volt dry cell , battery 12 volt , galvanometer , voltmeter , ammeter , dc copper connection wire roll insulated , nicrome wire , simple torch , laser torch red , laser torch green , laboratory stop watch 60 sec timer , white screen for image formation , plane mirror mounted on wooden block 10 x 15 cm , compass magnet small , iron filling , thread roll , geomerical instrument box , paper pin box , thumb pin box , lens cleaner fluid , multimeter digital , ebonite rod , glass rod 20 to 25 cm , test tube , test tube stand , solar system model , soldering iron , solder flux , soder wire resin 100gm , paper tape , plain stickers or label pkt , electric apparatus chart , prism refraction chart , eye defect and correction chart , inertia of 3d body , reflection of convex mirror on different position , reflection of concave mirror on different position , human eye chart , symbols of components used in circuit diagram , flaming left and right hand rule , sound wave refraction and compression , carbon resistance band reading chart , dry cell part chart , solar system chart , albert einstein portrait , prafulla chandra roy portrait , chandrasekhara venkata raman portrait , homi jehangir bhabha portrait , jagadish chandra bose portrait , dr apj abdul kalam portrait , sir issac newton portrait , ammonium chloride 500 gm chemical , copper sulphate 500 gm chemical , zinc sulphate 500 gm chemical , zinc rod , spirit solution for spirit lamp 1 ltr , first aid kit , sitting stools ,, procurement of items for physics lab, equipment or item for physics lab, rexine chart for physics lab, portraits of scientist for physics lab, chemical for physics lab, personal safety or storage item for physics lab
Agency / Dept :
department of secondary education
Due Date :
Jun 29, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16175634
Location : pune , maharashtra
Source : GEM Tenders
corrigendum tender for 3d printed patient specific anatomy model abs material with spine as per spec , carbon fibre halo ring system for skull traction with compatible, all sizes , neurosurgical patties 10 x 15 mm , neurosurgical patties 20 x 20 mm , bone wax sterile packing isopropyl palmitate with bee wax , match head cutting burr 3 mm compatible with 14 cm angled as per spec , match head cutting burr 3 mm compatible with 10 cm angled as per spec , match head cutting burr 3 mm compatible with 9 cm straight as per spec , diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system , diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system , neck positioning sponge with mirror spine pillow, head positioner , sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec , fibrin glue 2ml kit with fibrin and sealant , drape for spine endoscopic surgery , sterile drape for zeiss microscope , hemostatic agent made from oxidized regenerate cellulose orc fibrillar , lodine impregnated antimicrobial incise drape 66 cm x 45 cm, echs re 21, 3d printed patient specific anatomy model abs material with spine as per spec, carbon fibre halo ring system for skull traction with compatible, all sizes, neurosurgical patties 10 x 15 mm, neurosurgical patties 20 x 20 mm, bone wax sterile packing isopropyl palmitate with bee wax, match head cutting burr 3 mm compatible with 14 cm angled as per spec, match head cutting burr 3 mm compatible with 10 cm angled as per spec, match head cutting burr 3 mm compatible with 9 cm straight as per spec, diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system, diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system, neck positioning sponge with mirror spine pillow, head positioner, sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec, fibrin glue 2ml kit with fibrin and sealant, drape for spine endoscopic surgery, sterile drape for zeiss microscope, hemostatic agent made from oxidized regenerate cellulose orc fibrillar, lodine impregnated antimicrobial incise drape 66 cm x 45 cm
Agency / Dept :
indian army
Due Date :
Jul 13, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15999239
Location : pune , maharashtra
Source : GEM Tenders
corrigendum tender for echs re 21 3d printed patient specific anatomy model abs material with spine as per spec , carbon fibre halo ring system for skull traction with compatible, all sizes , neurosurgical patties 10 x 15 mm , neurosurgical patties 20 x 20 mm , bone wax sterile packing isopropyl palmitate with bee wax , match head cutting burr 3 mm compatible with 14 cm angled as per spec , match head cutting burr 3 mm compatible with 10 cm angled as per spec , match head cutting burr 3 mm compatible with 9 cm straight as per spec , diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system , diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system , neck positioning sponge with mirror spine pillow, head positioner , sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec , fibrin glue 2ml kit with fibrin and sealant , drape for spine endoscopic surgery , sterile drape for zeiss microscope , hemostatic agent made from oxidized regenerate cellulose orc fibrillar , lodine impregnated antimicrobial incise drape 66 cm x 45 cm, echs re 21, 3d printed patient specific anatomy model abs material with spine as per spec, carbon fibre halo ring system for skull traction with compatible, all sizes, neurosurgical patties 10 x 15 mm, neurosurgical patties 20 x 20 mm, bone wax sterile packing isopropyl palmitate with bee wax, match head cutting burr 3 mm compatible with 14 cm angled as per spec, match head cutting burr 3 mm compatible with 10 cm angled as per spec, match head cutting burr 3 mm compatible with 9 cm straight as per spec, diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system, diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system, neck positioning sponge with mirror spine pillow, head positioner, sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec, fibrin glue 2ml kit with fibrin and sealant, drape for spine endoscopic surgery, sterile drape for zeiss microscope, hemostatic agent made from oxidized regenerate cellulose orc fibrillar, lodine impregnated antimicrobial incise drape 66 cm x 45 cm
Agency / Dept :
indian army
Due Date :
Jul 01, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15943803
Location : new delhi , delhi
Source : GEM Tenders
tender for renovation work of aicte idea lab providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , supply of esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , supply of pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , supply of ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , supply installation testing and commissioning 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2), as per spacification
Agency / Dept :
department of technical education and training DTET
Due Date :
Jul 08, 2026
Tender Value :
50.32L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16088968
Location : pune , maharashtra
Source : GEM Tenders
corrigendum tender for echs re 21 3d printed patient specific anatomy model abs material with spine as per spec , carbon fibre halo ring system for skull traction with compatible, all sizes , neurosurgical patties 10 x 15 mm , neurosurgical patties 20 x 20 mm , bone wax sterile packing isopropyl palmitate with bee wax , match head cutting burr 3 mm compatible with 14 cm angled as per spec , match head cutting burr 3 mm compatible with 10 cm angled as per spec , match head cutting burr 3 mm compatible with 9 cm straight as per spec , diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system , diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system , neck positioning sponge with mirror spine pillow, head positioner , sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec , fibrin glue 2ml kit with fibrin and sealant , drape for spine endoscopic surgery , sterile drape for zeiss microscope , hemostatic agent made from oxidized regenerate cellulose orc fibrillar , lodine impregnated antimicrobial incise drape 66 cm x 45 cm, echs re 21, 3d printed patient specific anatomy model abs material with spine as per spec, carbon fibre halo ring system for skull traction with compatible, all sizes, neurosurgical patties 10 x 15 mm, neurosurgical patties 20 x 20 mm, bone wax sterile packing isopropyl palmitate with bee wax, match head cutting burr 3 mm compatible with 14 cm angled as per spec, match head cutting burr 3 mm compatible with 10 cm angled as per spec, match head cutting burr 3 mm compatible with 9 cm straight as per spec, diamond burr 3 mm compatible with 9 cm straight attachment of spine drill system, diamond burr 3 mm compatible with 10 cm angled attachment of spine drill system, neck positioning sponge with mirror spine pillow, head positioner, sterile disp spine drape pack consisting 01 bottom drape 01 top as per spec, fibrin glue 2ml kit with fibrin and sealant, drape for spine endoscopic surgery, sterile drape for zeiss microscope, hemostatic agent made from oxidized regenerate cellulose orc fibrillar, lodine impregnated antimicrobial incise drape 66 cm x 45 cm
Agency / Dept :
indian army
Due Date :
Jul 09, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16238320
Location : new delhi , delhi
Source : GEM Tenders
corrigendum tender for renovation work of aicte idea lab providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , supply of esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , supply of pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , supply of ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , supply installation testing and commissioning 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2), as per spacification
Agency / Dept :
department of technical education and training DTET
Due Date :
Jul 16, 2026
Tender Value :
50.32L
View Documents
T18 Ref No : 16226683
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 23, 2026
Tender Value :
64.96L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16313662
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
tender for almirah large steel with shelves , almirah small steel with shelves , almirah small steel hh hs , board notice pinup fell covered 6 feet x 4 feet , book case steel , cabinet filling 4 drawer , chair cb steel with arms , chair cb steel without arms , chair executive revolving , chair steel cba tubular padded with arms , chair easy cushioned , charpoy with hard top , hat stand with mirror small , locker steel , looking mirror 5 feet x 2 feet with alumn frame , peg table , podium stand of size h 45 inch x l 30 inch x d 24 inch , rack adjustable 6 tier , rack pigeon hole steel , rack side 4 space steel , sofa set 5 seater with cushion , stool steel 305 x 305 x 510 mm , study table for library 8 feet x 4 feet x 2 point 5 feet , table centre , table conference for 26 persons , table office clk steel , table office officer steel , work bench workshop 1800mmx900mmx760mm , peg set of three , peg set of six , woolen carpet 4m x 3.5m , mattress 78 inch x 36 inch x 4 inch , pillow , table bed side, provision of 03 lane slipway 500 ton capacity for cg ships at cg jetty port blair, 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. almirah shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified or shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. almirah shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified or shown in drawing and directed by enginer in charge., board notice pinup fell covered 6 feet x 4 feet, over all size shall be 840mm long 310mm wide and 1675mm high. back comma sides comma bottom comma top and shelves shall be 1mm thick ms sheet. the book case shall be provided with for compartments of equal size. the shutters of each compartments shall open towards top and slide into the depth of book case. two cp handles of 100mm long shall be provided to each compartment. all steel surface shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified or shown in drawing and directed by enginer in charge., cabinet filling 4 drawer, chair cb steel with arms, chair cb steel without arms, chair executive revolving, chair steel cba tubular padded with arms. as per trade pattern, all wood shall seasoned first class teak wood free from knots and defects hard nylon buffers shall be fixed at the bottom of legs with brass screws seat and back shall be made by 12mm thick bwr grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by ge. all exposed wooden surface shall be finished with french polish in light walnut shade or as approved by ge. rest all as specified or shown in drawing and directed by enginer in charge., long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms pipe.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut & washers. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as specified or shown in drawing and directed by enginer in charge., frame shall be 18 mm thick exterior grade mdf board one side laminated shade as approved by ge duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. bevelled edge mirror shall be fixed by using teakwood beading all around with decorative finish. brass hooks as per drawing specification shall be fixed by brass oval trim self tapping screw. rest all as specified or shown in drawing and directed by engineer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified or shown in drawing and directed by enginer in charge., over all size of the mirror shall be 5 feet high and 2 feet width. 5mm thich mirror shall be supported by 6mm thich bwr grade plywood. mirror and plywood shall be covered with alumn frame with key hole hook for hanging arrangement., all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wood surfaces shall be french polished with high glossy finish. rest all as specified or shown in drawing and directed by enginer in charge., podium stand of size h 45 inch x l 30 inch x d 24 inch, over all size shall be 915mm long comma 610mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing. shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge or ge., over all size shall be 915mm long comma 610mm wide and 1905mm high. frame shall be 40x40x5mm angle iron fixed with nut bolts irrespective of shown in drawing. top comma bottom comma sides comma back and shelves shall be 1mm thick crca ms sheet. the length of 915mm shall be devided into three equal compartments horizontally and 1805mm height shall be devided into six compartments equally to give overall eighteen compartments. all steel surface shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge or ge., over all size shall be 1120mm long comma 355mm wide and 810mm high. frame shall be 40x40x5mm angle iron fixed with nut bolts irrespective of shown in drawing. mild steel shelves made to shape shall be welded to angle iron legs at 100mm from bottom and 50mm from top. top shelf shall have four compartments equally spaced with 50mm high partitions and bach covering with ms sheet of 1mm thick. all steel surface shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge or ge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth composition of 65 percentage polyester and 35 percentage cotton or as approved by ge and make of cushion shall be kurlon oblique sleepwell. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all exposed wooden surface shall be finished with deco polish in light walnut shade or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., top shall be 1mm thick ms sheet. legs shall be 40x40x5mm angle iron irrespective of shown in drawing. 40 x 40 x 5mm triangular piece shall be welded to bottom of legs. all steel surface shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified oblique shown in drawing and directed by enginer in charge., study table for library 8 feet x 4 feet x 2 point 5 feet. as per trade pattern, all wood shall be kiln seasoned first class teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws. top shall be 18 mm thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge, comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wood surfaces exposed to view when placed in position shall be french polished with high gloss finish. rest all as per drawing., table conference for 26 persons. as per trade pattern, top shall be 18 mm thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive fevicol sh. with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by bso oblique ge comma duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive fevicol sh. with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., over all size shall be 1800mm long comma 900mm wide and 760mm high. four legs shall be of 32mm square ms tube of wall thickness 1 comma 6mm. size of steel frame shall be 1700mm x 800mm x 720mm. leg shall be 720mm high. top of table shall be provided with 40mm thick wood planks of width not less than 150mm joined together to make flush joints. all steel surface shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as specified oblique shown in drawing and directed by enginer in charge., all as specified oblique shown in drawing and directed by enginer in charge., woolen carpet 4m x 3 point 5m, mattress 78 inch x 36 inch x 4 inch. as per trade pattern, pillow, top comma sides and front shall be 18mm thick exterior grade mdf board one side pre laminated comma as approved by ge comma duly covered with 4mm thick half round teak wood beading in matching shade with synthetic adhesive fevicol sh. sides and back of the drawers shall be made out of 12mm thick bwr plywood whereas for bottom of the drawer 8mm thick plywood shall be used. front of the drawers shall be made out of 18mm thick exterior grade prelaminated mdf board. each drawer shall be supported with telescopic channel for smooth functioning. one 4 inch long chromium plated handle of approved quality should also be provided in each drawer. all steel surface shall be finished with black colour as approved by ge two coats of synthetic enamel paint upto obtaining glossy finishng over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified oblique shown in drawing and directed by enginer in charge.
Agency / Dept :
indian army
Due Date :
Jul 29, 2026
Tender Value :
1.05Cr
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Mirror Positioning System. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Mirror Positioning System sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Mirror Positioning System Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Mirror Positioning System, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Mirror Positioning System Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Mirror Positioning System Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Mirror Positioning System.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Mirror Positioning System depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Mirror Positioning System Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Mirror Positioning System bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Mirror Positioning System. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Mirror Positioning System, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Mirror Positioning System, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Mirror Positioning System?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Mirror Positioning System tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Mirror Positioning System?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Mirror Positioning System, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Mirror Positioning System is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All