Filters By:

T18 Ref No
Keyword
State
City
Agency
Tender ID
Due Date
Tender Source
Tender Type

14Results forLatest Juice heater repair Tenders List

Latest Juice heater repair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Juice heater repair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Juice heater repair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Juice heater repair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Juice heater repair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Juice heater repair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Juice heater repair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Juice heater repair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Juice heater repair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Juice heater repair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Juice heater repair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Juice heater repair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Juice heater repair tenders.

Is EMD mandatory for all Juice heater repair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Juice heater repair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Juice heater repair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Juice heater repair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16211058
live Tender
Source : GEM Tenders
live Tender

tender for works related to semikestner 1000 msq pipeline , wash out pipeline header to new quad body no 1 , raw juice pump pipeline , syrup pipeline cleaning work , syrup sulphiter pipeline , new quad no 4 extension catcher vapour body , bagassilo fan repair , big filter mud tray repair , vacuum air line work , pipe fabrication , clear juice tank repair , pump and motor alignment , juice heater repair , condensate bottle fabrication , clarifier repair , cane carrier repair , secondary rack carrier repair , rack carrier repair , cane carrier runner replacement , secondary rack carrier runner replacement , rack carrier runner replacement , cane carrier structural repair , rack carrier structural repair , cane carrier chain beam repair , inter rack carrier trough repair , mill trough repair , trpf lower plate repair , mill roller repair , leveler repair , fiberizer repair , secondary rack carrier trough repair , tail shaft bed repair , mill pinion repair , cane carrier angle replacement , secondary rack carrier angle replacement , trpf roller juice plate repair , cold water pipeline work , bearing cooling line replacement , pipe fittings , mill juice pipeline work , hot water pipeline work , screen juice pipeline work , flange work , nipple work , mill fabrication work , header fabrication , delivery header fabrication , trpf tank repair , transmission gear repair , juice pump pipeline work , reducer fabrication , flange fabrication , band fabrication , trpf cover fabrication , trpl chute repair , crane unloader rail replacement , bearing housing repair , juice distribution tray fabrication , trpf roller repair , rack repair work , crown pinion guard repair , tail bar repair , trpf water cover repair , mill roller grooving , chain link forging work, fabrication and installation of 6 inch tee in the pipeline complete as required, dismantling of existing 8 inch ms pipeline complete, reinstallation of 8 inch ms pipeline at the designated position including alignment welding testing and successful trial run, opening/removal of existing 8 inch valve, installation of 8 inch valve at the designated location complete, supply fabrication and installation of 8 inch flange complete, supply and installation of 8 inch nipple complete, dismantling of existing 8 inch and 6 inch pipelines including removal from site, reinstallation of 8 inch and 6 inch pipelines at the designated position including alignment welding testing and successful trial run, dismantling of existing 8 inch raw juice pump pipeline and disposal of dismantled material at the designated scrap yard, reinstallation of 8 inch ms pipeline including alignment welding testing and successful trial run, fabrication and installation of 8 inch x 6 inch reducer complete, fabrication and installation of 8 inch flange complete, removal and reinstallation of 8 inch valve at the designated location complete, fabrication and installation of 8 inch nipple complete, dismantling of existing 6 inch syrup pipeline from syrup pump to syrup tank complete, fabrication and installation of 6 inch x 3 inch reducer complete, fabrication and installation of 2 inch flange complete, fabrication of 6 inch nipple complete, opening/removal of existing 6 inch valve, refitting and fastening of 6 inch valve after maintenance complete, fabrication and installation of 6 inch tee complete, fabrication and installation of 8 inch bend complete, fabrication and installation of 800 mm diameter nipple complete, dismantling of existing 8 inch pipeline complete, reinstallation of 8 inch pipeline at the designated position including alignment welding testing and successful trial run, fabrication and installation of 8 inch tee complete, dismantling of damaged extension catcher vapour body of new quad no 4 removal of corroded angle channels disposal of scrap at the designated scrap yard fabrication of a new catcher from 10 mm thick ms plate by bending installation at site completion of all necessary connections and successful trial run approximate size diameter 160 m x length 620 m, cutting and removing damaged casing of bagassilo fan fabrication using supplied 8/10 mm ms plate installation and satisfactory trial, cutting and removing damaged mud tray of big filter disposal of scrap fabrication using supplied 8/10 mm ms plate installation and satisfactory trial (approx dia 375 m x length 860 m), dismantling of 6 inch vacuum air line with filter, fixing of 6 inch vacuum air line in position including alignment and satisfactory trial, fabrication and installation of 6 inch ms flange, fabrication and installation of 6 inch ms tee, fabrication and installation of 6 inch ms nipple, cutting and removing corroded box of clear juice liquidation tank door fabrication using 8 mm ms plate installation all connections and satisfactory trial (approx size 10 m x 10 m), fitting fixing alignment of ms band for 120 hp clear juice pump and motor including satisfactory trial, replacement of strip and flat iron for top and bottom header rubber packing fixing new rubber packing and satisfactory trial, removal of condensate bottle of juice heater/quad semicaser/vapor cell fabrication of new bottle using supplied 8/10 mm ms plate and installation, removal of corroded distributor from clarifier compartment disposal of scrap fabrication of new distributor using 6/8 mm ms plate installation and satisfactory trial, replacement of damaged side and bottom plates of cane carrier using supplied 6 mm ms plate, replacement of damaged side and bottom plates using supplied 6 mm ms plate, replacement of damaged side and bottom plates of rack carrier no1 2 & 3 using supplied 6 mm ms plate, cutting and removing old runner and fixing new runner for cane carrier, cutting and removing old runner and fixing new runner, cutting and removing old runner and fixing new runner for rack carrier no1 2 & 3, removal of corroded supporting angles/channels and installation of new supporting angle, removal of corroded angles/channels and installation of new angle, replacement of 150 mm chain beam, removal of old trough of inter rack carrier no1 2 & 3 fabrication using supplied 8/10 mm ms plate and installation, cutting and replacing damaged trough of mill no3 & 4 including satisfactory trial, removal of damaged lower plate under trpf of mill no2 & 3 fabrication using supplied 10/12 mm ms plate and installation, fabrication of new juice rings for mill rollers using supplied 6/8 mm ms plate as per sample, dismantling damaged side plates of leveler disposal of scrap fabrication and installation of new 8/10 mm ms side plates, dismantling damaged side plate of fiberizer disposal of scrap fabrication and installation of new 8/10 mm ms side plate, removal of old trough fabrication using supplied 8/10/12 mm ms plate and installation, cutting and removing worn tail shaft bed of secondary rack carrier fabrication using supplied 200 mm beam and installation, fabrication and installation of new pinion gear for mill no3 removal of old gear and disposal to scrap yard, removal of damaged angles from cane carrier side plate/inter rack carrier 2 & 3 and installation of new angles, removal of damaged angles from secondary rack carrier/inter rack carrier 2 & 3 fabrication and installation of new angles, removal of damaged juice plate of trpf rollers fabrication using supplied 8/10 mm ms plate and installation, dismantling of existing 4 inch cold water pipeline from mill no1 to mill no3 and installation of new pipeline, removal of worn bearing cooling line from mill no1 to 4 and installation of new 3 inch pipeline complete with flange and nipple, supply/fabrication and installation of 3 inch flange, supply/fabrication and installation of 1 inch nipple, cutting and removing old 6 inch mill juice pipeline from mill juice pump no 3 to mill no 1 and installing new 6 inch ms pipeline complete with fitting and testing, dismantling existing 4 inch dia hot water pipeline from mill no 3 to mill no 4 and installing new pipeline complete with fittings and testing, cutting and removing old pipeline from mill juice pump no 4 to mill no 2 and installing new 6 inch ms pipeline complete with fittings and testing, cutting and removing old pipeline from mill screen juice pump to raw juice tank and installing new 6 inch & 8 inch pipeline complete with fittings and testing, dismantling and installation of 6 inch flange, dismantling and installation of 8 inch flange, dismantling and installation of 10 inch flange, dismantling and installation of 4 inch nipple, dismantling and installation of 6 inch nipple, dismantling and installation of 8 inch nipple, fabrication and preparation of mill beds complete as required, removing existing 12 inch screen juice header fabricating new header as per sample erection reconnection and satisfactory trial, fabrication and installation of new 10 inch delivery header (21 m long) for screen juice tank including 8 inch & 10 inch nipples erection and testing, cutting damaged top cover of trpf tank fabrication using supplied 8/10 mm ms plate installation and satisfactory trial, inspection and repair/checking of bottom cover of transmission gear of mill no 4 as per sample, installation of 6 inch juice pump pipeline complete with fitting and testing, fabrication and installation of 6 inch reducer in the pipeline, fabrication and installation of 8 inch reducer in the pipeline, fabrication and installation of 6 inch flange in the pipeline, fabrication and installation of 4 inch flange in the pipeline, fabrication and installation of 6 inch pipe band/support, fabrication of top cover for trpf sluice installed in mill house, removing damaged angles of cane carrier side plate and inter rack carrier no 2 & 3 and installing new angles, removing damaged angles of secondary rack carrier and inter rack carrier no 2 & 3 and installing new angles, dismantling damaged side and back plates of trpl chute of mill no 2 fabrication using supplied 10/12 mm ms plate installation and satisfactory trial, removing damaged rail of crane unloader trolley installing new 40 x 40 mm rail strengthening and testing, fabrication and installation of new cover for mill bearing housing, fabrication and installation of juice distribution trays in mill juice pipeline at designated locations, welding and repair of trpf rollers including welding and correction of damaged side plates, repair of secondary rack carrier and inter rack carrier racks, removing damaged water guard of crown pinion of mill no 3 fabrication of new guard from supplied 2/3 mm plate and installation, welding and fabrication of cut tail bars of mill no 1 & 3 as per required dimensions, dismantling damaged trpf water cover of mill no 2 fabrication using supplied 8/10 mm ms plate installation and satisfactory trial, carrying out pineapple (chevron) grooving/cutting work on mill rollers, forging of side links of cane carrier bagasse carrier elevator and rbc chain including fitting of pins and bushes profiling and finishing to required size


Due Date : Jul 27, 2026
T18 Ref No : 16103288
live Tender
Location : sarsawa , uttar pradesh
Source : GEM Tenders
live Tender

tender for clarification and evaporator fabrication works removing the calandria of the evaporator and installing and fitting a new calandria of 650 m square heating surface and installing all the pipe lines valves and accessories in their place , replacing an old and worn out grand consultant juice plaza condensate syrup bottle with an 8 10 mm msc plate by connecting all connections. , the worn out umbrella plate in the vapor cell semi concentrator was removed and the plate was repaired and replaced with plastic , replacing the umbrella in the wide body vapor cell semi concentrator with a dated and 6 8 mm msc plate and conducting a trial. , removing the neck selvage of the quad body semi container and replacing it with a new 8 10 mm ms plate and testing it. , removing the neck selvage of the quad body semi container and repairing it with the provided plate and testing it. , cutting out the weakened roof of the quad body and replacing it with a 12mm plate provided and testing it. , cutting out the weakened part of the semi capacitor vapor cell quad body cell and replacing it with a 10 12mm plate provided and testing it for a satisfactory leak proofing test. , removal of the weak part of the exhaust pipeline going to the semi condenser vapor shell and fitting a new 800 mm diameter pipeline using the provided 8 10 mm plate in its place. , cutting out the worn partition plates of the top and bottom headers of the juice heater and replacing them with the provided 8 10 mm plate arranging for fitting the rubber strip , installing and strengthening the umbrella fitted to the vapor shell semiconductor quad body and conducting a satisfactory trial. , removing the weak intermediate first vapor second vapor pipes of the quad bodies and constructing new ones with a diameter of 500 650 mm using an 8 10 mm plate and conducting a satisfactory trial. , removing the weakened intermediate first vapor second vapor pipes of the quad bodies and installing new ones with a diameter of 700 850 mm from 8 10 mm plates and conducting a satisfactory trial. , dismantle fabricate and erect a 600 800 mm band and conduct a satisfactory trial. , dismantle fabricate and erect a 900 1100 mm band and conduct a satisfactory trial. , remove the steam valve from the juice heater and installation a new right angle valve size 400 500 mm with the corresponding pipe connection modifications and conduct a trial. , cut and remove the double beat valve from the juice heater and installation a new double beat valve size 8 diameter and conduct a trial , remove the intermediate coolers from the film type sulfur furnaces and installation them using the provided pipe plate and conduct a trial. , installation the sublimation pipes from the satvik type sulfur furnaces using the provided pipe or a new one and conduct a trial. , remove the empty filtrate bottle from the vacuum filter and installation a new filtrate bottle using an 8 10 mm ms plate and conduct a trial. make all connections and conduct a trial. , removing the filtrate bottle plate of the vacuum filter and repairing it with the provided plate and giving it a trial. , removing the filtrate plate of the vacuum filter tray and repairing it with the provided plate. , cutting and removing the neck shell of the lime slaker at the lime station and replacing it with a new one using the provided plate and giving it a trial. , creating the melter from the satvik sulfur furnace with a new 8 10 mm plate and giving it a satisfactory trial by installing the steam coil. , removing the worn out coils in the melters of the satvik sulfur furnace replacing them with new ones and conducting hydraulic testing and giving a satisfactory trial. , removing the worn out plates of the vacuum filter condensers replacing them with new ones and giving a satisfactory trial , removing the damaged weak steam coils in the film tine sulfur melters replacing them with new ones and conducting hydraulic testing and giving a satisfactory trial , renovate and installation a new so2 chamber inside the coolers of the satvik sulfur furnace and conduct a trial. , remove the old corroded so2 gas line at the sulfur furnace station and installation the new seamless ms line with flanges tightening the joints and bolts , remove the grooved plate of the mud mixture on the vacuum filter and repair it with the new plate provided , remove the grooved plate of the filtrate tank located below the vacuum filter installation the plate provided and perform a trial. , repairing the weak parts of juice and mud with dry box of clarifier and making all the connections. , patch the weak shell of the burning chamber of the film type sulfur furnace with the plate provided for a length of approximately 5 feet from the bottom and give a satisfactory trial. , patch the weak and rotten platforms of both vacuum filters with a new burner from the provided plate. , removing the so2 chamber inside the last cooler of the film type sulfur furnace and installing a new one using the provided 10 mm ms plate and making all connections. , repairing the damaged clear juice bottles near the clear juice pumps and making all the connections and giving satisfactory trial. , cut out and remove all rotten mud scrapers inside the door clarifier and installation the provided plates and belts according to size and give a satisfactory trial. , coat and remove the weak mud boot plates in each compartment of the clarifier and installation the provided new plates. , repairing the weak parts of the agitator fitted on the vacuum filter and giving satisfactory trial. , removing, clarification and evaporator fabrication works, clarification and evaporator


Due Date : Jul 18, 2026
T18 Ref No : 16239051
live Tender
Source : GEM Tenders
live Tender

corrigendum tender for fabrication repairing the condensate tank pump delivery line of the pan 1 , repairing the condensate tank pump delivery line of the pan 2 , repairing the condensate tank pump delivery line of the pan 3 , replacing damaged bypass line band flange of melter 1 , replacing damaged bypass line band flange of melter 2 , replacing damaged bypass line band flange of melter 3 , replace damaged 100 pound 3inch size pipeline from pan no 1 to pan no 6 and give satisfactory trial , replace the weak vapor pipe from pan no 1 to 6 size dia 1 150 m length 30 m 1 , replace the weak vapor pipe from pan no 1 to 6 size dia 1 150 m length 30 m 2 , replace main hole dia 600 mm of pan no 3 sevual with 10 mm thick plate , replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size 1 , replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size 2 , replace corroded nipples pipes flanges of 6inch size header on pan no 5 and 6 installation related nipples valves etc and give satisfactory trial , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 1 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 2 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 3 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 4 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 5 , cut and remove damaged wash-out line installed on the pan and rebuild with supplied pipe and installation it 1 , cut and remove damaged wash-out line installed on the pan and rebuild with supplied pipe and installation it 2 , replace damaged washing pipeline nipple flange band on pan no 6 1 , replace damaged washing pipeline nipple flange band on pan no 6 2 , replace damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , installation valve in steam line at pan no 2 550 mm 1 , installation valve in steam line at pan no 2 550 mm 2 , installation valve in steam line at pan no 2 550 mm 3 , installation valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and installation new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick, fabrication, fabricate and installation 6inch size nipple, fabricate and installation 6inch size flange, dismantling 6inch size pipeline, installing 6inch size pipeline and giving satisfactory trial, fabricate and installation 6inch size band, replace damaged 100 pound 3inch size pipeline from pan no 1 to pan no 6 and give satisfactory trial, dismantle the weak vapor pipe from pan no 1 to 6, fabricate the weak vapor pipe from pan no 1 to 6, replace main hole dia 600 mm of pan no 3 sevual with 10 mm thick plate, replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size, replace corroded nipples pipes flanges of 6inch size header on pan no 5 and 6 installation related nipples valves etc and give satisfactory trial, replace 2inch size pipeline, fabricate and installation 2inch size flange, fabricate and installation 2inch size nipple, fabricate and installation 3inch size flange, fabricate and installation 3inch size valve, replace and installation 6inch size pipeline, replace 6inch size pipeline of the above, installation valve in steam line at pan no 2 550 mm, installation flange in steam line at pan no 2 550 mm, installation nipple in steam line at pan no 2 550 mm, fabricate and installation catcher element size 75 x 75 x 8 angle on pan no 4 and 5, replace nipples of the above tank, replace bands of the above tank, replace partition of syrup tank with 10/12 mm thick plate, remove clean and reinstall 4inch size syrup line on pan, cut and remove syrup header and fabricate and installation new header, replacing the 6inch size glycol washing line fitted on pan no 1, replacing nipples of 2inch size line mentioned above, replacing nipples of 4inch size line mentioned above, replacing nipples of 6inch size line mentioned above, replacing nipples of 8inch size line mentioned above, replacing 10inch size nipples of cut off line of pan no 6, replacing 10inch size pipe line, making and fitting 10inch size flange, making and fitting 10inch size band, making and fitting 8inch size band, replacing 4inch size pipe line, making and fitting 4inch size flange, making and fitting 4inch size valve, fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial, dismantling weak condensate bottle of old set vertical line juice heater and quad body no 4 disposing to scrap yard fabricating all connections using 8/10 mm plates and giving satisfactory vacuum trial, replacing 2inch size pipeline, replacing 6inch size pipeline, making and fitting 2inch size flange, making and fitting 6inch size flange, making and fitting 6inch size band, making and fitting 6inch size valve, dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it, cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same, fitting mentioned line into service tank, making and fitting 8inch size nipple, dismantling and fitting 6inch size pipeline, dismantling resistance box installed on spray making and fitting new one from given m m plate carrying out proper stay fitting and welding and conducting leak proof trial, dismantling and installing 8inch size pipeline, fabricating and installing 8inch size bands, fabricating and installing 8inch size flanges, dismantling and installing 12inch size pipeline, fabricating and installing 12inch size bands, fabricating and installing 12inch size flanges, dismantling and installing 3inch size pipeline, manufacturing and installing 3inch size nipples, manufacturing and installing 3inch size bands, cutting and removing damaged monitor casing and ribs inside canty no 1 and 2 and kcp machine 1 and 2 patching with 10/12 mm ms plate and giving satisfactory trial 1, cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate 1, dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections, dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick plate and depositing scrap in scrap yard, dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new plate of 6 mm thickness depositing scrap in scrap yard, modifying sugar chute of grader in dryer house and giving satisfactory trial, dismantling and installing 4inch size pipeline, fabricating and installing 4inch size flanges, manufacturing and installing 4inch size bands, manufacturing and installing 4inch size nipples, removing transit heater installed on c centrifugal machine opening side plate for cleaning and hydraulic servicing reinstalling in place and making all connections, dismantling and installing 2inch size pipeline, fabricating and installing 2inch size flanges, manufacturing and installing 2inch size nipples, manufacturing and installing 2inch size valves, removing old taper of sugar hopper no 1 scrapping it fabricating new one from 3/5 mm ms plate installing and giving satisfactory trial, dismantling and installing 6inch size pipeline, manufacturing and installing 6inch size bands, manufacturing and installing 6inch size flanges, manufacturing and installing 5inch size flanges, manufacturing and installing 5inch size valves, removing damaged/weak top and bottom sugar discharge chute of canty machine no 4 including flange scrapping fabricating new parts with 6 mm ms plate as per suit sample preparing all connections like angle channel etc fitting on side and giving satisfactory trial, installing 2inch flow meter, dismantling the damaged 6inch dia pipeline from primary clarifier to anoxic tank and putting it in scrap yard and installing a new pipeline, installing 4inch size valve/nrv, fabricating 4inch size band, fabricating and installing 2inch size flange, dismantling the damaged 8inch dia pipeline from aeration tank to secondary tank and putting it in scrap yard, dismantling diffusers installed in aeration tank and putting them in scrap yard and replacing the throat part, in sulfate removal plant reaction chamber dismantling corroded 6 mm partition plate putting it in scrap yard and fabricating with new 8 mm plate, dismantling corroded 2inch size treated water outlet line of etp and putting in scrap yard and installing new 3inch size line at the same location, dismantling 800 mm dia exhaust pipe line below turbine with nipple band flange and putting in scrap yard, fabricating 800 mm dia exhaust pipeline below turbine from 12 mm plate by bending and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline below vapor cell 950 wag meter from 12 mm plate by bending and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline below vapor cell 950 wag meter from 12 mm plate by bending into t shape and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline dummy/flange from 12 mm plate by bending and installing at position and providing satisfactory trial, dismantling weak part of semichemiser 1000 wag meter warm saser putting scrap in scrap yard fabricating from 12 mm thick plate by bending and installing with related connections and giving satisfactory trial size dia 3 4 m, dismantling weak parts of old quad body no 2 and 3 20inch vapor pipe putting scrap in scrap yard fabricating from 8 mm thick plate by bending and installing and providing satisfactory trial, dismantling weak parts of vapor pipe 32inch size of vapor cell 1000 wag meter putting scrap in scrap yard fabricating from 8 mm thick plate by bending and installing and providing satisfactory trial, dismantling weak part of 6inch size header of all juice heaters condensate and installing new one, removing all partition plates of juice heater header by cutting straight and circular shapes cleaning tube plate completely and fabricating new circular and straight partition plates from 10/12 mm plate installing and preparing header with ms strips as before applying rubber strips and providing satisfactory trial, cutting out quailons and all related angles fixed in clarifier compartments and refitting after completion of work and providing satisfactory trial, patching inside clarifier with 6/8 mm ms plate, dismantling damaged 8inch size ms pipeline from clarifier clear juice overflow tank to sombox, installing 6inch size ms pipeline from clarifier compartments no 2 and 3 to mud tank and providing satisfactory trial, opening 6inch size valve and installing at designated location, fabricating 6inch size nipple and installing at designated location, fabricating 6inch size flange by cutting plate and dismantling to fit, dismantling 4inch size air pipeline above door including nipple band flange and putting scrap in scrap yard, installing 4inch size air pipeline above door and providing satisfactory trial, dismantling 6inch size ms pipeline of big vacuum filter mud tank overflow line and putting scrap in scrap yard, fitting and trial of 6inch size ms pipeline overflow line of big vacuum filter mud tank at position, fabricating 6inch size band, fabricating 8inch size band, dismantling 8inch size pipeline from big vacuum filter pump to condenser and putting scrap in scrap yard, fitting and trial of 8inch size pipeline from big vacuum filter pump to condenser at position, dismantling 4inch ms pipeline from filter juice header to vibro screen, fitting and trial of 4inch ms pipeline from filter juice header to vibro screen at position, making 4inch size nipple, opening 4inch size valve, installing 4inch size valve at the specified location, cutting 4inch size flange from plate making it and fitting after drilling, dismantling 3inch size pipeline, installing and fitting 3inch size line at position and giving satisfactory trial, making and installing 3inch size t, making and installing 3inch size nipple, cutting 3inch size flange from plate making it and installing, making and installing 3inch size band, dismantling 8inch size clear juice overflow pipeline, installing and fitting 8inch size clear juice overflow pipeline at position and giving satisfactory trial, installing and fitting 6inch size pipeline at position and giving satisfactory trial, making and installing 6inch size band/elbow at specified location, making and installing 6inch size t, dismantling 4inch size pipeline, installing and fitting 4inch size pipeline at position and giving satisfactory trial, making and installing 4inch size band, making and installing 4inch size t, dismantling 10inch size pipeline, installing fitting and trial of 10inch size pipeline at position, making and installing 10inch size t, making and installing 10inch size dummy/flange, dismantling 6inch pipeline, installing fitting and trial of 6inch size pipeline at position, opening and binding 6inch size valve, installing fitting and trial of 4inch size pipeline at position, making and installing 8inch and 6inch size cross, dismantling 4inch size ammonia pipeline of semichemiser quad, installing 4inch size ammonia pipeline of semichemiser quad at position, making 4inch size band, making 4inch size t, making 4inch size flange, dismantling 2inch size pipeline, fixing 2inch size pipeline in position, dismantling new quad no 2 vapor pipe 24inch size vapor pipeline fabricating it by bending with 10 mm thick plate and installing, fabricating and installing 24inch size bends, fabricating and installing 24inch size tees, fabricating and installing 24inch size flange/dummy, dismantling 24inch size pipeline, fitting 24inch size pipeline in position, fabricating and installing 24inch size flange, cutting damaged 6inch syrup pump header fabricating new header and installing along with fitting all related nipples valves etc and conducting satisfactory trial, dismantling bent incoming and outgoing wax and heater cell and partition plate between double beat valve of juice heater/ juice heater header fabricating new one using 12/10 mm plate as before installing and conducting satisfactory trial, dismantling 6inch condensate header of juice heaters and replacing the weak part, fitting 6inch size pipeline in position and conducting satisfactory trial, fabricating and installing 6inch size flange, fabricating and installing 6inch size nipple, fabricating and installing 6inch size tees, dismantling and fitting 6inch size pipeline in position and conducting satisfactory trial


Due Date : Jul 17, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 15206898
Source : GEM Tenders

tender for , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and installation it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and installation it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and, fabrication and erection work, fabrication


Due Date : May 16, 2026
T18 Ref No : 15379022
Source : GEM Tenders

corrigendum tender for , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and installation it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and installation it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and, fabrication and erection work, fabrication


Due Date : May 22, 2026
T18 Ref No : 15532369
Source : GEM Tenders

corrigendum tender for , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and installation it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and installation it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and, fabrication and erection work, fabrication


Due Date : Jun 01, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 15603090
Source : GEM Tenders

corrigendum tender for , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and installation it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and installation it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and, fabrication and erection work, fabrication


Due Date : Jun 04, 2026
T18 Ref No : 15832016
Source : GEM Tenders

corrigendum tender for , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and installation it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and installation it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and, fabrication and erection work, fabrication


Due Date : May 27, 2026
T18 Ref No : 16042254
Location : nanauta , uttar pradesh
Source : GEM Tenders

tender for clarification house item no 39 , evaporator and clarification house item no 40 , pan house item no 1 , pan house item no 2 , pan house item no 3 , pan house item no 4 , pan house item no 5 , pan house item no 6 , pan house item no 7 , pan house item no 8 , pan house item no 9 , pan house item no 10 , pan house item no 11 , pan house item no 12 , pan house item no 13 , pan house item no 14 , pan house item no 15 , pan house item no 16 , pan house item no 17 , pan house item no 18 , pan house item no 19 , pan house item no 20 , pan house item no 21 , pan house item no 22 , pan house item no 23 , pan house item no 24 , pan house item no 25 , pan house item no 26 , pan house item no 27 , pan house item no 28 , pan house item no 29 , injection item no 1 , injection item no 2 , injection item no 3 , schedule work item no 1 , schedule work item no 2 , schedule work item no 3 , schedule work item no 4 , schedule work item no 5 , schedule work item no 6 , schedule work item no 7 , schedule work item no 8 , schedule work item no 9 , schedule work item no 10 , schedule work item no 11 , schedule work item no 12 , schedule work item no 13 , schedule work item no 14 , schedule work item no 15 , schedule work item no 16 , schedule work item no 17 , schedule work item no 18 , schedule work item no 19 , schedule work item no 20 , schedule work item no 21 , schedule work item no 22 , schedule work item no 23 , schedule work item no 24 , schedule work item no 25 , schedule work item no 26 , schedule work item no 27 , schedule work item no 28 , schedule work item no 29 , schedule work item no 30 , schedule work item no 31 , schedule work item no 32 , schedule work item no 33 , schedule work item no 34 , schedule work item no 35 , schedule work item no 36 , schedule work item no 37 , schedule work item no 38 , schedule work item no 39 , schedule work item no 40 , schedule work item no 41 , schedule work item no 42 , schedule work item no 43 , schedule work item no 44 , schedule work item no 45 , schedule work item no 46 , schedule work item no 47 , schedule work item no 48 , schedule work item no 49 , schedule work item no 50 , schedule work item no 51 , schedule work item no 52 , schedule work item no 53 , schedule work item no 54 , schedule work item no 55 , schedule work item no 56 , schedule work item no 57 , schedule work item no 58 , schedule work item no 59 , schedule work item no 60 , schedule work item no 61 , schedule work item no 62 , schedule work item no 63 , schedule work item no 64 , schedule work item no 65 , schedule work item no 66 , schedule work item no 67 , schedule work item no 68 , schedule work item no 69 , schedule work item no 70 , schedule work item no 71 , schedule work item no 72 , schedule work item no 73 , schedule work item no 74 , schedule work item no 75 , schedule work item no 76 , schedule work item no 77, boiling house febrication, dismantling cleaning repairing and refitting work of catcher internal elements of new semikestner (2300 m2) with leak proof trial, dismantling fabrication and erection work of evaporator body or semikestner or vapour shell complete with save all of uttam quad set, major repair of save all of the evaporator body or semikestner or vapour shell along with leak proof water and vacuum trail, dismantling fabrication and erection of weak or worn out partition plate of top and bottom header of juice heater and repairing of rubber strip holding grooves along with fitting of both cover leak proof water and vacuum trial, dismantling fabrication and erection work of the sulphur furnace melter along with hydraulic tested steam coil with all connections and satisfactory trial, dismantling fabrication and erection work of the sulphur furnace melt receiver along with hydraulic tested steam coil with all connections and satisfactory trial, dismantling fabrication and erection of sulphur furnace secondary cooler with its cooling coil and complete connection of water and associated pipe lines with satisfactory trial, repairing of sulphur furnace secondry cooler by replacing bunch of cooling pipe by providing all its existing connection, dismantling fabrication and erection of juice receiving bottle fitted at vacuum filter station by providing all its existing connection, dismantling fabrication and erection of weak or leak condenser at vacuum filter, dismantling fabrication and erection of muddy juice receiving tank complete with all connection and associated pipe lines along with leak proof trial, dismantling fabrication and erection of mud tray of vacuum filter 10feet x 20feet vacuum filter along with satisfactory trial, dismantling fabrication and erection weak mud agitator of 10feet x 20feet vacuum filter along with satisfactory trial, dismantling fabrication and erection of mud tray of vacuum filter 14feet x 28feet vacuum filter along with satisfactory trial, dismantling fabrication and erection weak mud agitator of 14feet x 28feet vacuum filter along with satisfactory trial, dismantling fabrication and erection of weak juice box of juice heater along with fitting of double beat valve and leak proof trial, dismantling fabrication and erection of weak or worn out portion of clear juice liquidation box along with leak proof trial, dismantling fabrication and erection of weak or worn out clarifier mud boot along with leak proof trial, dismantling fabrication and erection weak shell of compartment no 1 and 2 of juice clarifier (big) work of new dorr diameter 28feet capacity 3750 hl body shell including completion of all connections and leak proof trial, dismantling fabrication and erection weak shell of compartment no 1 of juice clarifier (small) work of new dorr diameter 24feet capacity 2550 hl body shell including completion of all connections and leak proof trial, dismantling fabrication and erection of weak shell of juice sulphiter 320 hl including completion of all connection and leak proof trial, dismantling fabrication and erection of juice catcher for raw or vacuum orsugar melter orsulphited juice pumps with suction or delivery connection, repairing of juice heater condensate bottle or evaporator or syrup receiving bottle with leak proof testing partition plate with all connection, repairing of so2 furnace sublimation pipe with its leaking tower etc with testing, dismantling fabrication and erection of vacuum filter mud mixer body and fitting of screw conveyor with proper alignment and satisfactory trial, fabrication and erection of screw conveyor as per old sample for mud mixture from 6mm thick plate with satisfactory trial, dismantling fabrication and fitting of new down take of quad or old or new semikestner etc, dismantling fabrication and erection of weak or leaky recovery tower of juice sulphiter or syrup sulphiter, repairing of umbrella and providing essential supports of quad, dismantling fabrication and erection of worn out umbrella of quad with old or new plates, dismantling fabrication and erection of saveall of quad old bodies, replacement of worn-out top conical portion of quad and vapour shell with save all proper strengthening with associated machinery, dismantling of worn out arms and shell (outside and inside) of juice sulphiter drum fabrication and erection with satisfactory trial, to replace worn out clear juice box or mud discharge box with valve of new dorr followed by satisfactory trial, replacement of worn out mud scrapper plate and fitting of mud scrapper at vacuum filter, major repair of lime slaker with proper alignment and trial, to replace worn out sulphur furnace header of size 8 inch or 10 inch between after burner and cooler, replacement of worn-out stirrer arms of clarifier completed with all support and squeezers etc, replacement of partition plate of old dorr compartment or intermediameterte tray with 5 or 6mm ms plate, dismantling of existing 700 sqm h s area of quad body first (uttam set calandria ) providing the support for stay the shell above calandria unloading of new calandria from vehicle by their resources shifting of new calandria at the site fitting and erection of calandria at the place of old calandria with shell fitting of bottom cone of calandria inlet vapour or exhaust steam connection water line connection and making all other connection to run the body complete in all respect, repairing of down-take of pan for 40 or 50 ton pan, repairing of down-take of pan for 60 or 80 ton pan, dismantling of gutter of molasses magma and massecuite, fabrication and fitting of gutter of molasses magma and massecuite, repairing of hinge type cover of gutter, replacement of worn-out condensate box of pans quad and juice heaters, dismantling fabrication and fitting of new umbrella in pans with supports and j pipes 40 or 50 ton pan, dismantling fabrication and fitting of new umbrella in pans with supports and j pipes 60 or 80 ton pan, repairing of umbrella of pans with supports and j pipes 40 or 50 ton pan, repairing of umbrella of pans with supports and j pipes 60 or 80 ton pan, replacement of worn out distributor by new for 40 or 50 ton pan, replacement of worn out distributor by new for 60 or 80 ton pan, replacement of weak sight glass flanges of pan and evaporater body along with leak proof water and vaccuum trial, replacement of complete worn-out or weak top cone of 40 or 50 ton pan by new with supports and strengthening of associated machinery parts proper along with leak proof water and vacuum trial, replacement of complete worn-out or weak top cone of 60 or 80 ton pan by new with supports and strengthening of associated machinery parts proper along with leak proof water and vacuum trial, strengthening of 40 or 60 ton pan body and taper portion with channel etc, dismantling fabrication and erection of box type feed header for each pan with all related connections including valves nipples flanges etc, dismantling fabrication and erection of weak portion of pan shell with 12mm ms plate along with leak proof water and vacuum trial welding must be double coated from outside and inside, replacement of weak orworn out side and bottom plate of cold or hot water over head tank syrup tank and molasses storage tanks at pan station by providing proper strengthening, fabrication and erection of complete new down take of 40 or 50 ton pan along with leak proof water and vacuum trial, fabrication and erection of complete new down take of 60 or 80 ton pan along with leak proof water and vacuum trial, repairing of weak orworn out save-all of 40 or 50 ton pan along with leak proof water and vacuum trial, dismantling fabrication and erection of pan save all with proper trial 40 or 50 ton along with leak proof water and vacuum trial, dismantling fabrication and erection of 60 or 80 ton pan save all along with leak proof water and vacuum trial, repairing of weak save-all of 60 or 80 ton pan along with leak proof water and vacuum trial, dismantling fabrication and erection of worn out portion of the chute for pan discharge valve with satisfactory trial, repairing or patching of weak body shell of molasses conditioner along with alignment of reduction gear box and motor, dismantling fabrication and fitting work of 80ton pan save all internals, disamantling,reapiring and re-fitting with leak proof trial of collapsed ss venturi of pan no 10 condensor, replacement of weak/leaky suction and delivery pipe of mf- 50x50/ 40x40 injection and spray pump as per old sample making and fitting of stone catcher fitting of pipe with pump, dismantling ,fabrication and erection of weak/wornout delivery pipe of injection pump having one end reducer, disamantling,fabrication and fitting work of injection header suction pipe mesh type stainer, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 1 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 2 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 3 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 4 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 5 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 6 inch diameter, dismantling fabrication and erection of bend size-2 inch diameter (ms), dismantling fabrication and erection of bend size- 3 inch diameter (ms), dismantling fabrication and erection of bend size- 4 inch diameter (ms), dismantling fabrication and erection of bend size- 5 inch diameter (ms), dismantling fabrication and erection of bend size- 6 inch diameter (ms), dismantling fabrication and erection of bend size- 8 inch diameter (ms), dismantling fabrication and erection of bend size-10 inch diameter (ms), dismantling fabrication and erection of bend size-12 inch diameter (ms), dismantling fabrication and erection of nipple size- 1inch diameter (ms), dismantling fabrication and erection of nipple size- 2 inch diameter (ms), dismantling fabrication and erection of nipple size- 3 inch diameter (ms), dismantling fabrication and erection of nipple size- 4 inch diameter (ms), dismantling fabrication and erection of nipple size- 5 inch diameter (ms), dismantling fabrication and erection of nipple size- 6 inch diameter (ms), dismantling fabrication and erection of nipple size- 8 inch diameter (ms), dismantling fabrication and erection of nipple size- 10 inch diameter (ms), dismantling fabrication and erection of nipple size- 12 inch diameter (ms), dismantling fabrication and erection of cross size- 6 inch diameter (ms), dismantling fabrication and erection of cross size- 8 inch diameter (ms), dismantling fabrication and erection of cross size- 10 inch diameter (ms), dismantling fabrication and erection of tee size- 4 inch diameter (ms), dismantling fabrication and erection of tee size- 5 inch diameter (ms), dismantling fabrication and erection of tee size- 6 inch diameter (ms), dismantling fabrication and erection of tee size- 8 inch diameter (ms), dismantling fabrication and erection of tee size- 10 inch diameter (ms), dismantling fabrication and erection of tee size- 12 inch diameter (ms), dismantling fabrication and erection of flange size- 4 inch diameter (ms), dismantling fabrication and erection of flange size- 5 inch diameter (ms), dismantling fabrication and erection of flange size- 6 inch diameter (ms), dismantling fabrication and erection of flange size- 8 inch diameter (ms), dismantling fabrication and erection of flange size- 10 inch diameter (ms), dismantling fabrication and erection of flange size- 12 inch diameter (ms), dismantling fabrication and erection of reducer size-4 inch diameter (ms), dismantling fabrication and erection of reducer size-5 inch diameter (ms), dismantling fabrication and erection of reducer size-6 inch diameter (ms), dismantling fabrication and erection of reducer size-8 inch diameter (ms), dismantling fabrication and erection of reducer size-10 inch diameter (ms), dismantling fabrication and erection of reducer size-12 inch diameter (ms), dismantling and fitting of valve size- 3 inch diameter, dismantling and fitting of valve size- 4 inch diameter, dismantling and fitting of valve size- 5 inch diameter, dismantling and fitting of valve size- 6 inch diameter, dismantling and fitting of valve size- 8 inch diameter, dismantling and fitting of valve size- 10 inch diameter, dismantling and fitting of valve size- 12 inch diameter, dismantling fabrication and fitting of man hole, dismantling fabrication and erection of platform by using old/new plate, fabrication and erection of railing from old material, fabrication and erection of t ring for strengthening of evaporator /pan vapour pipe, dismantling of ms heavy structure / tank, dismantling of ms light structure, fabrication and erection light structure, fabrication and erection heavy structure, fabrication of pump bed with pump, reduction gear and motor alignment up to 7 5 h p, fabrication of pump bed with pump, reduction gear and motor alignment up to 10 h p, fabrication of pump bed with pump, reduction gear and motor alignment up to 25 h p, fabrication of pump bed with pump, reduction gear and motor alignment up to 30 h p, dismantling and cleaning of ms pipe line with bend, flange , nipple etc, fitting of ms pipe line with bend, flange ,nipple etc after cleaning, fabrication and erection of complete square / rectangular /round tank with conical bottom, fabrication and fitting of ms coil (coils are to be duly bend and not offset pipe welding offset welds shall not be treated as coils but as pipes ) size-25mm, fabrication and fitting of ms coil (coils are to be duly bend and not offset pipe welding offset welds shall not be treated as coils but as pipes ) size-50mm, fabrication and fitting of ms coil (coils are to be duly bend and not offset pipe welding offset welds shall not be treated as coils but as pipes ) size-75mm, fabrication and fitting of ms coil (coils are to be duly bend and not offset pipe welding offset welds shall not be treated as coils but as pipes ) size-100mm, fabrication and fitting of ms coil (coils are to be duly bend and not offset pipe welding offset welds shall not be treated as coils but as pipes ) size-125mm, fabrication and fitting of ms coil (coils are to be duly bend and not offset pipe welding offset welds shall not be treated as coils but as pipes ) size-150mm, dismantling, fabrication and fitting of new cone and umbrella any where in the factory cone above 01 mtr dia upto 25mtr dia, dismantling , fabrication and fitting of new cone and umbrella any where in the factory, cone above 25 mtr dia, fabrication and patchwork of equipments using old/ new ms plate by 6/8 mm thick plate over round vessels/any vessels, disamntling fabrication and erection of weak vapor/exhaust steam pipe line and bend dia from 500mm to 900mm complete in all respect with leak proof trial, disamntling fabrication and erection of intermediate vapor pipe/vapor pipe and bends of quad bodies and vapor pipe and bends of pan dia from 900 mm to 1300 mm complete in all respect with leak proof trial


Due Date : Jul 15, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Published By

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Juice Heater Repair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Juice Heater Repair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Juice Heater Repair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Juice Heater Repair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Juice Heater Repair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Juice Heater Repair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Juice Heater Repair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Juice Heater Repair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Juice Heater Repair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Juice Heater Repair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Juice Heater Repair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Juice Heater Repair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Juice Heater Repair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Juice Heater Repair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Juice Heater Repair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Juice Heater Repair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Juice Heater Repair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Juice Heater Repair is declared L1 and is generally awarded the contract