sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

13Latest Indoor positioning Tenders List

Latest Indoor positioning Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Indoor positioning tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Indoor positioning tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Indoor positioning Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Indoor positioning tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Indoor positioning Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Indoor positioning Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Indoor positioning Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Indoor positioning tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Indoor positioning Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Indoor positioning sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Indoor positioning tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Indoor positioning tenders.

Is EMD mandatory for all Indoor positioning tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Indoor positioning work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Indoor positioning tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Indoor positioning Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16877538
Location : kamrup , assam
Source : GEM Tenders
LIVE TENDER
tender for wall cladding , upvc window , window glazing , window blind , painting , allied works , mcb 1 , mcb 2 , wiring , pvc conduit 1 , pvc conduit 2 , modular blanking plate , pvc box 1 , pvc box 2 , pvc box 3 , modular switch 1 , modular switch 2 , modular switch 3 , modular switch 4 , wiring 1 , wiring 2 , wiring 3 , itc , led light 2, renovation of zmc chamber at esdic ro guwahati, providing & fixing in position phenol bonded bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide as detailed in the detailed boq enclosed with the nit document, providing and fixing factory made upvc white colour sliding glazed window upto 1.50 m in height dimension as detailed in the detailed boq enclosed with the nit document, providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge, providing and fixing window blind, including complete in all respect as per the direction of engineer in-charge., distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per specification provided, allied works as per the boq and item-wise specifications enclosed with the nit document, supplying and fixing 5 a to 32 a rating 240/415 v miniature circuit breaker as detailed in the detailed boq enclosed with the nit document, supplying and fixing 40a rating double pole 240 volts isolator in the existing mcb db as detailed in the detailed boq enclosed with the nit document, wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable as detailed in the detailed boq enclosed with the nit document, supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required- 20mm dia, supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required- 25 mm dia, supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., supplying and fixing gi/pvc box alongwith modular base & cover plate for modular switches in recess etc.as required- 3 module (100mmx75mm), supplying and fixing gi/pvc box alongwith modular base & cover plate for modular switches in recess etc.as required- 6 module (200mmx75mm), supplying and fixing gi/pvc box alongwith modular base & cover plate for modular switches in recess etc.as required- 8 module (125mmx125mm), supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required- 5/6 a switch, supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required- 3 pin 5/6 a socket outlet, supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required- 15/16a switch, supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required- 6 pin 15/16 a socket outlet, wiring for circuit/ submain wiring alongwith earth wire - 1 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire, wiring for circuit/ submain wiring alongwith earth wire - 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire, wiring for circuit/ submain wiring alongwith earth wire - 2 x 4 sq. mm + 1 x 4 sq. mm earth wire, installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, supplying of ceilling mounted 22 watt indoor type led light fittings as detailed in the detailed boq enclosed with the nit document
Agency / Dept :
employees state insurance corporation ESIC
Due Date :
Sep 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16883686
Location : palakkad , kerala
LIVE TENDER
auction of machinary, dust collector, 1250 kva distibution transformer, hydraulic rubber bale cutter and accessories. three roll type calendar, heavy duty mixing mill, cooling drum train tread rubber extruder, weighting kit for vileigh bridge, 700 mt hydraulic press, 60 mt hydraulic press. mainframe and cylinder piston assembly for 700 mt hydraulic press, main frame cylinder position assembly for 700 mt hydraulic press, k4 intermix auxiliary equipment with capacity 25 tonnes day. thermic fluid heat exchanger fire fluid heat exchanger and accessories, refurbished sheeting mill auxiliary equipments, batch off unit auxiliary equipments, buffing machine and solution mixer, conveyor for extruder and intermix, electronic weighing machine, moulds, m.s. chute for lintermix, pumps 5 hp and; 7.5 hp. welding machine, chain block and power tools. mold holding plate supporting leg and; accessories, ms skid, alfred herbert k4 intermix machine s.no. k4-13398, reverse osmosis system capacity 500 lph with dosing pump, ply glass vessel, multiport valve with accessories, density specific gravity tester and; height, lab equipments oscillating disc rheometer, tensile testing machine, hydraulic manual packing box, dumbbell cutting press). voltas make 3 ton capacity fork lifts specific gravity lab with pneumatic press, air conditioner tables and chairs, vacuum cleaner, pallet truck (6 nos.), pallet trolley (2 nos.), steel ladder pedestalfan, steel bench, table (4 nos. office room: cpu 12 nios, monitor, printer (hp and; epson), new steel tables size 4x16 (2 nos.) and 4x8 (1 no electricals: mv panel, mccb panel, rtcc panel, acb 2 nos. (2000a and; 1250a), indoor vcb 630a and electrical accessories
Agency / Dept :
indian bank IB
Due Date :
Jul 08, 2028 (675 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16514340
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for schedule1 , schedule2 , schedule3 , schedule4 , schedule5 , schedule6 , schedule7 , schedule8 , schedule9 , schedule10 , schedule11 , schedule12 , schedule13 , schedule14 , schedule15 , schedule16 , schedule17, supply and installation of ac, supply and fixing of following ways surface recess mounting vertical type 415 v tpn 12 way mcb distribution board of sheet steel dust protected duly powder painted inclusive of 200 a tinned copper bus bar common neutral link earth bar din bar and mounting 5 a to 32a as per description in nit, supply and layingclampingdrawing of 35c x 50 sqmm 11 kv grade lt cable xlpe insulated pvc sheathed armored pvc overall sheathed multi stranded aluminium conductor cable conforming to is 7098parti as per description in nit, supply and wiring for circuit sub main wiring along with earth wire with the following sizes fr pvc insulated copper conductor single core cable in surface recessed medium class pvc conduit as required complete with all labour material tools tackles as directed by engineer in charge as per description in nit, core cutting for installation of 20 tr 3 star rated split ac unit as directed by engr ic complete with all labour tools and tackles as per description in nit, supply fixing testing of push button type motor starter for ac units along with suitable base complete with all materials tools and tackles as directed by engric make anchor cona millonmk, supply and fixing suitable size gi box with modular plate and cover in front on surface or in recesses including providing and fixing 6 pin 56 1516 a modular socket and 1516 a modular switch connections etc as per description in nit, supply installation testing and commissioning of 50 kva stabilizers to work on 170-240vac with time delay relay and over load protection as directed by engricmake unistabv guardreal guarditl as per description in nit, supply fixing connecting and commissioning of lt 3 phase and neutral floor mounted in door type thickness of 3 mm with hinged door of following switch gears of approved brands with necessary 600 amps alluminium bus bar arrangement witas per description in nit, supply and layingclampingdrawing of 35c x 240 sqmm 11 kv grade lt cable xlpe insulated pvc sheathed armored pvc overall sheathed multi stranded aluminum conductor cable conforming to is 7098part-i as as per description in nit, supply and providing of pcc 136 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate including mixing depositing in position tamping finishing and curing for basepole concreting road cutting etc as directed by engineer in charge including all labour and tools as per description in nit, excavation of pit trench in soft loose soil of required width and depth for erection of bg rail poles spun poles struts or for laying ht lt underground cables gi pipes etc and refilling the pit trench and made good to match with the surroundings including cleaning the debris as directed complete all labour and material as per description in nit, supply and providing earth station using 3 meters long 80 mm medium grade gi pipe in a masonry enclosure of duly filling with alternate layers of coal and charcoal complete with gi funnel and covering with pcc cover and conforming to is 3043 as directed by engineer in charge including all labour and material as per description in nit, supply and laying 50 mm x 6 mm gi strip as strip earth electrode including connection terminating with gi nut bolt spring washer etc as required jointing shall be done by overlapping and with 2 sets of gi nut bolt spring washer spaced at 50mm as directed by engineer in charge as per description in nit, supply installation testing and commissioning of 20 tr with 5 star bee rating air cooled hi wall split type air conditioners complete with indoor unitidu outdoor unit odu surface concealed copper refrigerant piping with insulation closed cell elastomeric nitrile rubber tubular pipe section as per description in nit, supply and running of 2 runs of copper tube of size 12inch x 14inch for section and liquid line between indoor outdoor unit of split ac unit with foam as as per description in nit, supply installation testing commissioning of eas 4 stainless steel air curtain 4 feet air through 21 ms including door closers 230 volts 50hz as per description in nit, supply and fixing of set of ms stand for above ac unit complete with all materials labour tools and tackles as directed by engric as per description in nit
Agency / Dept :
visakhapatnam port trust VPT
Due Date :
Aug 24, 2026
Tender Value :
32.28L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16384445
Location : shimla , himachal pradesh
Source : GEM Tenders
tender for supply installation testing and commissioning of 315 kva, 11kv, 433v, 3 phase onan oil transformer , supply installation testing and commissioning of 11kv ht vcb panel , supply installation testing and commissioning of 11kv apfc panel , supply of 3cx95 sq.mm. xlpe insulated pvc sheathed aluminium conductor armoured power cable of 11kv grade , laying of 11 kv grade cable in the existing rcc or hume or metal pipe as required. , laying of 11 kv grade cable in the existing masonry open duct as required. , supplying and making indoor cable end termination with heat shrinkable jointing kit , supplying and making outdoor cable end termination with heat shrinkable jointing kit , supplying and making straight through heat shrinkable joint , supplying of 63 mm dia dwc hdpe pipe , laying of 63mm dia dwc hdpe pipe complete with fitting and cutting, jointing etc. , excavation of the cable trenches in hard rock , providing and laying in position cement concrete 1 to 2 to 4 ratio , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories , supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground , providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe , providing and fixing 25 mm x 5 mm copper strip , supply and fixing of fire retardant electrically insulated synthetic mat , providing and fixing 11kv high voltage level indicating danger plate, replacement of transformers ht panel apfc panel and other associated works at shimla airport, supply, installation, testing & commissioning of indoor type 315 kva,11kv/433 volts, 3 phase , 50 hz, step down , delta / star connected (dyn 11), neutral earthed, copper wound ,core type, double wound, oil immersed, onan cooled transformer having level 2 energy efficiency with octc (+) 10% to (-)10% in step of 2.5% of variation of hv, with automatic remote tape changer panel including oil conservator, explosion vent, 150 mm dial type themometer for indicating winding & oil temparature fitted in a marshalling box, silica-gel breather ,buchholz relay complete with weather proof cable end termination box on ht side suitable for termination of armoured cable of size upto 3 core 300 sq.mm on ht side, end termination box on lt side terminations of armoured cables, standard fitting and accessories , including first fill of filtered dehydrated oil etc. complete as per is 1180, level-2 as per specification enclosed. job includes, dismantling 02 nos. of existing 250kva transformers including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic., supply installation testing and commissioning of indoor type ip 42 floor mounted metal clad, 11 kv switch board vcb panel with 03 nos vcbs totally enclosed and fully interlocked, truck mounting, horizontal draw out, horizontal isolation type vacuum breaker as per is iec 62271 100 2007 and 200 2003, is 3427 as amended up to date for breakers and panels, having capacities as mentioned below, free standing extensible on both sides, single break, trip free mechanism, motorised charged and auto-manually closing breaker suitable for use on 11 kv, 3 phase, 50hz a.c. supply with rack in and rack out mechanism, air insulated but encapsulated copper bus bars capacity meeting fault level current, dc power pack, breaker featured with mechanical on- off indicator with hand trip device, breaker control tnc switch and all accessories such as shunt trip coil, and auxiliary switch of 4no and 4nc, motorised and manually operated spring assisted closing mechanism, emergency trip push button, interconnections, space heaters, earthing, etc. and equipped with following switchgears and accessories, connections suitable for cable upto 3c x 120 sqmm xlpe cable of 11 kv grade (cable entry from bottom). job includes, dismantling 01 nos. of existing ocb panel including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic. (detailed description of the item is available in attached technical specification document)., supply, installation, testing and commissioning of indoor type thyristor switched apfc panel consist of thyristors , intelligent apfc controller, thyristor firing modules, self current limiting coil complete with controls for automatic power factor improvement of capacitor bank(s) suitable for operation on 415 v, 50 hz, ac supply and to maintain the p.f. upto 0.99 lagging. fabricated from crca sheet steel enclosure made out of 2mm thick sheet steel with a common earth bus bar at rear with 2 nos earth studs at both the ends, cable alleys, 3 mm thick cable gland plates, extended rotary handles, 6 inch fans with filter for cooling etc. complete as required as per specification enclosed with the following equiped switch gears and accessories. job includes, dismantling 01 nos. of existing apfc panel including all necessary connection and moving them within a distance of 100m safely and handing them over to aai dismantle store as per directions of eic. (detailed description of the item is available in attached technical specification document)., supply of 3cx95 sq.mm. size of xlpe insulated pvc sheathed aluminium conductor armoured power cable of 11kv grade earthed conforming to is 7098 (part-ii) amended up to date., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 11 kv grade of following size in the existing rcc/ hume/ metal pipe as required. (a) up to 120 sq.mm., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 11 kv grade of following size in the existing masonry open duct as required. (a) up to 120 sq.mm., supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required (a) 3 x 95 sq.mm., supplying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete as required. a) 63 mm dia (od - 63 mm & id - 51 mm nominal ), laying of following size dwc hdpe pipe complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 63 mm dia (od - 63 mm & id - 51 mm nominal ), excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil, refilling with excavated sand and or good soil after laying of cable/ pipe etc and disposal of surplus excavated soil as directed, within a lead of 50 metres., providing and laying in position cement concrete 1 to 2 to 4 (1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size) etc including form work etc as required., earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required., supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of copper/gunmetal nut bolt & spring washer spaced at 50mm.), providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required., providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required., supply and fixing of fire retardant electrically insulated synthetic mat of class b, 2.5 mm thick suitable for all ac voltages up to 11 kv meeting requirements of is 15652(2006) tested for breakdown strength, tensile or elongation, aging properties, insulation resistance, effect to acid, alkaline, diesel, transformer oil & leakage current test, fire test etc. having minimum width of 1000 mm + or - 20 mm along with all allied materials such as pu-resin, chemi bound, special pvc adhesive, liquid primer etc. in what so ever quantity required to complete the job as per site conditions and as per instructions from engineer-in-charge., providing & fixing size 200 mm x 150 mm size 11kv high voltage level indicating danger plates made of mild steel at least 2 mm thick & vitreous enamelled white on both sides & with inscriptions of voltage level danger red colour on front side as read.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 13, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16121822
Location : bardhaman , west bengal
Source : GEM Tenders
tender for supply laying testing and connecting xlpe sheathed pvc insulated screened pvc size 3.5 core 240 sqmm complete all as specified and as directed. , supply installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy sound level not more than 75db , m and l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground earth pit not less than 2.25mtr , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth getting out in soft loose soil complete all as specified and as directed. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , s and f galvanised iron pipe 80mm bore dia light grade for protection of ug cable laid in floors road crossing , s and f hdpe dwc double walled corrugated of diameter 90 mm including disconnection and connection of cable , material and labour for manufacturing installation testing and commissioning of factory made and tested cpri approved amf , m and l for surface excavation n.exc not exceeding 30 cm deep and averaging 15cm deep , m and l for hardcore using broken stone or boulders of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick , m and l for cement concrete in foundations filling and mass concrete type d2 1 4 8 , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole inclduing form work , m and l for excavating in post holes or similar holes each n exc 0.5 cu. m getting out returning filling in and ramming earth , s and f for steel work in tubular trusses cloumn purlin including special shaped washer nut bolt etc. , s and f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick , m and l for preparation of steel surfaces of any description over 10 cm , m and l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 , providing and laying at or near ground level factory made kerb stone of m25 grade , m and l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm , s and f 4pole 630 amp changeover switch with enclosure suitable for 415 v ac 3phase 4 wire , wrecking crow bar or claw bar as per is 706 (q3), supply, laying, testing and connecting xlpe sheathed,pvc insulated screened pvc bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade of size 3.5 core 240 sqmm complete all as specified and as directed., supply, installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy (sound level not more than 75db at a distance of 1 mtr) 14 guage as per guidelines issued by central pollution control board (cpcb ivplus, 4plus), 415 volts, 3 phase, 50 hz supply complete, control panel suitable for giving an output of 250 kva and alternator of suitable capacity and rpm coupled with each other with flexible coupling mounted on anti vibration pads on foundation as recommended by manufacturer. the dg set shall comprise of self starter with batteries, turbocharger, water cooler and comprising all standard fittings, fixtures & all piping etc. as below (a) alternator directly coupled with engine and suitable to produce 415 volts, 3 phase, 4 wire system, 50 hz, 0.8 pf 1500 rpm of capacity 250 kva all as per is 13364 and upto date amendments with h class insulation, self excited, self regulated, screen protected drip proof type with two end shield ball / roller bearing with damper winding in each pole, complete all as specified and directed. (b) engine water cooled diesel engine (cpcb norms iv compliance) developing 105 bhp having self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per oem) as per is 10001/10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 rpm industrial type as per bs 649 or is 1601 with ai electronic governor suitable to regulate speed of dg set from no load to full load complete with fuel tank of capacity as per manufacturer s recommendation, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer muffiers etc. for continuous operation and standard accessories, sump pre heaters, cold start kit etc., m&l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick, burried directly in ground, earth pit not less than 2.25mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to the galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers of galvanised steel and earth lead protected by provision of 40mm bore gi pipe medium grade and including provision of concrete pit in pcc 1 2 4 type b 1 (using 20mm grade crushed stone aggregate) with 40mm thcik rcc (type b 1) cover reinforced with 8mm dia tmt bar both ways with 12mm dia round bar handle and frame of angle iron 25x25x3mm with lugs 02 nos and 20mm bore gi light grade watering pipe with funnel and wiremesh and filling common salt and charcol and test point with fixing arrangements and including necessary excavation in any type of soil, returning filling in and removing excavated soil to a distance of 50mtr from the site, complete all as shown on electrical plate no 3 of mes ssr part i and directed., excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, getting out in soft / loose soil, complete all as specified and as directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed., removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil, complete all as specified and as directed., m&l sand cushioning (dry) in trenches for protection of ug cables (below, above and around the ug cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (note for the purpose of payment, punned thickness of sand cushioning only shall be measured and paid)., m&l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable, complete all as specified and as directed., s&f galvanised iron pipe 80mm bore (dia) light grade for protection of ug cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed., s & f hdpe dwc (double walled corrugated) of diameter 90 mm including disconnection and connection of cable near panel/oh for pipe fixing including joints complete all as directed., material and labour for manufacturing, installation testing and commissioning of factory made and tested, cpri approved amf panel for 250 kva dg set, indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 volts, 3 phase 4 wire 50hz ac supply system, conforming to is 5039, ip54 class protection and made of 3mm crca mild steel sheet with 50x 50x6mm angle iron frame, hinged doors, front & rear opeing and locking arrangement with necessary bus bar arrangment with insulated al. bus bar 1000 amps rating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for mccb with suitable capacity of al. bus bar strips including heat shrinkable sleeves, and providing extended bus bars with chember arrangement for outgoing cables, copper control wiring of required size for instruments including necessary pcc in 1 2 4 type b1 using 20mm graded stone aggregate for platform of suitable size , prewired with copper cable of suitable size all as standard practice of manufacturer specifications with the following acessories incomer1 & 2 (main & dg) (a) busbars 1000a tpn 415volts 3phase 4 wire color coaded aluminium busbars 1 lot (b) mccb 630a fp edo 50ka microprocessor based ( o/c, s/c & e/f) release with motor, closing & shunt, aux. contact 4noplus4nc 2 nos. (c) amf relay (econ) 1 nos. (i) digital ammeter 1 nos. (ii) digital voltmeter 1 nos. (iii) ct 1000/5a cl1 10va 1 nos (iv) phase indication light red 230v ac 1 nos. (v) phase indication light yellow 230v ac 1 nos. (vi) phase indication light blue 230v ac 1 nos. (vii) indication lamp 22mm dia color red 240v ac (on) 2 nos. (viii) indication lamp 22mm dia color green 240v ac (off) 2 nos. (ix) indication lamp 22mm dia color amber 240v ac (trip) 2 nos. etc., m&l for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed., m&l for hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed., m&l for cement concrete in foundations, filling and mass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., m&l for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed., s & f for steel work in tubular trusses, cloumn, purlin including special shaped washer, nut, bolt etc. complete using erw or induction butt welded tubes conforming to i.s.1161 1979 grade st.240 complete all as specified., s&f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, m & l for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified, m&l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 of 60 mm thickness, m35 grade with grey cement and pigment all as specified and directed., providing and laying at or near ground level factory made kerb stone of m25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 3 (1 cement 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed., m&l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by engrincharge., s&f 4pole, 630 amp changeover switch with enclosure, suitable for 415 v ac, 3phase, 4wire, 50 hz system, for changeover between main supply and dg set. the switch shall be heavyduty, onload type conforming to is/iec 609473, with silver alloy contacts and adequate breaking capacity. the unit shall be mounted on a sturdy angle iron frame fixed over pcc block with necessary nuts, bolts and support structure. terminals shall be suitable for cable/busbar connection and provision for safe manual operation (or motorised operation, if required) shall be included complete with all accessories, mounting hardware all as specified and directed.
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16080559
Location : bokaro , jharkhand
Source : GEM Tenders
corrigendum tender for closing spring assembly including closing spring, dub bush and spring holder assembly of vm12 breaker , dashpot assembly for 6.6 kv 1250 a vaccum circuit breaker , set of pins for vcb, vm-12, bhel drg nos: 25211001581-002: 3 nos, 25211001581-004: 3 nos, (2521100158 , set of clips for vcb make bhel, type: vm- 12, bhel drg nos: 25211001588- 001: 2 nos, 25211001588- 002 , closing coil/tripping coil (220v dc) for 6.6kv vaccum circuit breaker bhel make type vm 12 , breaker auxiliary 52c/d contact operating leaver assembly with switches 6no+ 6nc for bhel make 6.6kv , breaker auxiliary 52a/b contact operating leaver assembly with switches 6no+ 6nc for bhel make 6.6kv , spring charging motor for vm-12, 7.2kv, indoor vacuum circuit breaker. make: bhel. drg. no. 25211001 , aux switch 16 way , closing unit assembly , rack-in/rack-out handle , service/ test position limit switch , complete assembly of plug and socket(32-pin plug & socket) assembly with interlock. bhel drg no: 352 , tripping spring assembly set bhel drg. 35211001536-v00
Agency / Dept :
damodar valley corporation DVC
Due Date :
Jul 08, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16154687
Location : varanasi , uttar pradesh
Source : GEM Tenders
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15, horticulture varanasi, providing complete maintenance of landscaped/garden area of approximately 8200 sqm or as directed by the engineer-in-charge within airport premises, comprising lawns, trees, shrubs, herbs, flower beds, potted plants, foliage plants, creepers and all other horticultural features, including all horticultural operations such as preparation and maintenance of basins, weeding, hoeing, pruning, trimming, training of plants, replacement of dead/damaged plants, gap filling, watering, mowing of lawns, grass cutting by lawn mower and brush cutter, collection, loading, transportation and disposal of garden waste at designated locations within airport premises using hand trolleys or other suitable means, application of fertilizers, insecticides and pesticides whenever required, top dressing of lawns with good earth and manure, and carrying out all other horticultural and garden maintenance works necessary for proper upkeep, healthy growth and aesthetic appearance of the landscape, complete as per the directions of the engineer-in-charge. the cost of good earth, manure, fertilizers, insecticides, pesticides and replacement plants shall be provided by the department free of cost. the contractor shall arrange all labour, supervision, fuel, lubricants, tools, tackles, machinery, equipment and other consumables required for satisfactory execution of the work. the contractor shall permanently deploy minimum 02 (two) nos. malis exclusively for execution of this work throughout the contract period and shall quote rates accordingly. in case of deployment of less than the stipulated number of malis, recovery at the rate of rs. 800/- (rupees eight hundred only) per day per mali shall be made from the contractors bills for the period of short deployment. ............ please refer boq item no.1 at boq page no. 1 of atc document., providing complete maintenance of landscaped/garden area of approximately 14,000 sqm or as directed by the engineer-in-charge within airport premises, comprising lawns, trees, shrubs, herbs, flower beds, potted plants, foliage plants, creepers and all other horticultural features, including preparation and maintenance of basins, weeding, hoeing, pruning, trimming, training of plants, replacement of dead or damaged plants, gap filling, watering, mowing of lawns, grass cutting by lawn mower and brush cutter, collection, loading, transportation and disposal of garden waste at designated locations within airport premises using hand trolleys or other approved means, application of fertilizers, insecticides and pesticides as and when required, top dressing of lawns with good earth and manure, and carrying out all other horticultural operations necessary for proper upkeep, healthy growth and aesthetic appearance of the landscape, complete as per the directions of the engineer-in-charge. the cost of good earth, manure, fertilizers, insecticides, pesticides and replacement plants shall be provided by the department free of cost. the contractor shall arrange all labour, supervision, fuel, lubricants, tools and plants, machinery, equipment and other consumables required for satisfactory execution of the work. the contractor shall permanently deploy minimum 02 (two) nos. malis exclusively for execution of this work throughout the contract period and shall quote rates accordingly. in case of deployment of less than the stipulated number of malis, recovery at the rate of rs. 800/- (rupees eight hundred only) per day per mali shall be made from the contractors bills for the period of short deployment.............please refer boq item no.2 at boq page no. 2 of atc document., providing complete maintenance of hedges/edges of approximately 6000 metres length within airport premises, including trimming and cutting of hedges/edges to the required shape, size and profile, collection, loading, transportation and disposal of cut material and other horticultural waste at designated locations within airport premises, cleaning of hedge beds, weeding, hoeing, soil loosening, preparation and maintenance of basins wherever required, watering, manuring, application of insecticides, pesticides and fungicides, replacement of dead/damaged hedge plants, gap filling and carrying out all other horticultural operations necessary for proper upkeep, healthy growth and aesthetic appearance of hedges/edges, complete as per the directions of the engineer-in-charge. the cost of manure, fertilizers, insecticides, pesticides, fungicides and replacement plants shall be supplied by the department free of cost. the contractor shall arrange all labour, supervision, tools and plants, machinery, equipment, power, fuel, consumables and other incidental items required for satisfactory execution of the work. the contractor shall permanently deploy minimum 02 (two) nos. malis exclusively for execution of this work throughout the contract period and shall quote rates accordingly. in case of deployment of less than the stipulated number of malis, recovery at the rate of rs. 800/- (rupees eight hundred only) per day per mali shall be made from the contractors bills for the period of short deployment. ............ please refer boq item no.3 at boq page no. 3 of atc document., providing complete maintenance of potted plants displayed at various locations and floors within the airport terminal building and allied buildings, including watering, application of good earth, manure, fertilizers, insecticides and pesticides, regular cleaning of pots and plants, removal of dry leaves and unwanted growth, pruning and trimming of plants, shifting of potted plants to sunlight and back to designated locations as required for healthy growth, rearrangement and display of pots at suitable locations as directed by the engineer-in-charge, replacement of dead, diseased or damaged plants, replacement of broken pots, painting/colouring of pots whenever required, changing locations of pots as directed, and carrying out all other horticultural operations necessary for maintaining the potted plants in healthy, clean and aesthetically pleasing condition, complete as per the directions of the engineer-in-charge. the cost of plants, pots, good earth, manure, fertilizers, insecticides and pesticides shall be supplied by the department free of cost. the contractor shall arrange all labour, supervision, tools, tackles, equipment, transportation and other incidental items required for satisfactory execution of the work. the contractor shall deploy minimum one (01) mali for every 750 potted plants or part thereof under maintenance throughout the contract period. any fraction of 750 pots shall be considered as a full unit for the purpose of manpower deployment. the quoted rate shall be deemed to include the cost of deployment of the required manpower, supervision, tools and equipment necessary for execution of the work. in case of deployment of less than the stipulated number of malis, recovery at the rate of rs. 800/- (rupees eight hundred only) per day per mali shall be made from the ............ please refer boq item no.4 at boq page no. 4 of atc document., providing services for pruning, trimming, crown reduction, canopy shaping and removal of dead, diseased, damaged, obstructing or overgrown branches of fully grown trees at various locations within airport premises, including climbing arrangements, cutting of branches, collection, loading, transportation and disposal of cut branches, leaves and other generated horticultural waste at designated locations within airport premises, complete as per the directions of the engineer-in-charge. the contractor shall arrange all labour, supervision, safety equipment, ropes, ladders, tools and plants, machinery and all other accessories required for safe and satisfactory execution of the work. note- pruning, trimming and shaping of trees located within lawn and landscaped areas, which are covered under the respective garden maintenance items, shall not be measured or paid separately under this item. special conditions- the contractor shall permanently deploy and maintain in good working condition at site throughout the contract period- minimum 02 (two) nos. electric/diesel/petrol chain saws, and all necessary tools, safety gear and equipment required for tree pruning operations. in case of failure to provide the required chain saws in working condition, recovery at the rate of rs. 500/- (rupees five hundred only) per day per chain saw shall be made from the contractors bills for the period of default. all pruning operations shall be carried out in accordance with sound arboricultural practices and as directed by the engineer-in-charge, ensuring safety of airport infrastructure, vehicles, personnel and passengers. nothing extra shall be paid on account of labour, transportation, machinery, fuel, safety arrangements, tools and plants or disposal of cut materials within airport premises., supplying, transporting, unloading and stacking well-decomposed cow dung manure at the specified site, including all royalties, taxes, duties, carriage, loading, unloading, handling, and all leads and lifts complete, as per the directions and satisfaction of the engineer-in-charge. note- the quantity of cow dung manure measured in stacks at site shall be reduced by 8% towards shrinkage and settlement for the purpose of payment., supplying and delivering urea fertilizer conforming to relevant is specifications, in manufacturers original sealed packing of 45 kg per bag, at the specified site, including loading, unloading, transportation, handling, stacking and all incidental charges complete, as per the directions and satisfaction of the engineer-in-charge., supplying and delivering di-ammonium phosphate (dap) fertilizer conforming to relevant is specifications, in manufacturers original sealed packing of 50 kg per bag, at the specified site, including loading, unloading, transportation, handling, stacking and all incidental charges complete, as per the directions and satisfaction of the engineer-in-charge., supplying and delivering good quality vermicompost, in manufacturers original sealed packing of 40 kg per bag, at the specified site, including loading, unloading, transportation, handling, stacking and all incidental charges complete, as per the directions and satisfaction of the engineer-in-charge., supplying and placing decorative roto-moulded square garden planter of make gardens need or equivalent of size 18 inch (approx. 45.72 cm) with matching bottom tray, made of virgin lldpe (linear low-density polyethylene) material, uv stabilized and weather resistant, suitable for indoor and outdoor horticultural applications. the planter shall be of robust roto-moulded construction, non-toxic, crack resistant, fade resistant and capable of withstanding varying climatic conditions. the surface finish shall be of premium decorative marble / stone effect in approved shades such as white marble, grey marble, sandstone, and similar finishes as approved by the engineer-in-charge. reference image is attached in technical specifications. the planter shall be square in shape with proper base support and drainage arrangement for healthy plant growth. the item shall include all cost towards material, manufacturing, transportation, loading, unloading, handling, stacking and placing at site in position complete as per approved sample and direction of engineer-in-charge., supplying and placing decorative roto-moulded round garden planter of make gardens need or equivalent with matching bottom tray, size 17 inch (approximately 43.18 cm diameter), made of virgin lldpe (linear low-density polyethylene) material, uv stabilized and weather resistant, suitable for indoor and outdoor horticultural applications. the planter shall be of robust roto-moulded construction, non-toxic, crack resistant, fade resistant and suitable for long-term exposure to varying climatic conditions. the finish shall be premium decorative marble/stone effect in approved shades such as white marble, grey marble, sandstone and other similar finishes as approved by the engineer-in-charge. reference image is attached in technical specifications. the planter shall be round in shape with a properly designed base and drainage arrangement, complete with a matching bottom tray of same material, same colour and finish to collect excess water and avoid spillage. the item shall include all cost of materials, manufacturing, transportation, loading, unloading, handling, stacking and placing at site in position, complete as per approved sample and directions of the engineer-in-charge., supplying and placing decorative roto-moulded square garden planter of make gardens need or equivalentof size 22 inch (approximately 55.88 cm) with matching bottom tray, made of virgin lldpe (linear low-density polyethylene) material, uv stabilized, weather resistant and suitable for indoor and outdoor horticultural applications. the planter shall be of robust roto-moulded construction, non-toxic, crack resistant, fade resistant and capable of withstanding adverse climatic conditions. the surface finish shall be premium decorative marble/stone/granite effect in approved shades such as white marble, grey marble, sandstone, granite marble and other similar finishes as approved by the engineer-in-charge. reference image is attached in technical specifications. the planter shall be square in shape with a stable base and proper drainage arrangement to ensure healthy plant growth and avoid water stagnation. the item shall include all cost towards material, manufacturing, transportation, loading, unloading, handling, stacking and placing at site in position complete as per approved sample and direction of engineer-in-charge., supplying and placing decorative roto-moulded round garden planter of make gardens need or equivalent of size 14 inch (approximately 35.56 cm diameter) with matching bottom tray, made of fresh virgin lldpe (linear low-density polyethylene) material, uv stabilized, weather resistant and suitable for indoor and outdoor horticultural applications. the planter shall be of robust roto-moulded construction, non-toxic, crack resistant, fade resistant and capable of withstanding adverse climatic conditions. the surface finish shall be premium decorative marble/stone effect in approved shades such as white marble, grey marble, sandstone, granite marble and other similar finishes as approved by the engineer-in-charge. reference image is attached in technical specifications. the planter shall be round in shape and shall be provided with a matching bottom tray of same material, same colour and finish to collect excess water and prevent spillage. the item shall include all cost towards materials, manufacturing, transportation, loading, unloading, handling, stacking and placing at site in position complete as per approved sample and direction of engineer-in-charge., supplying and placing decorative roto-moulded rectangular garden planter of make gardens need or equivalent of size 24 inch (approximately 60.96 cm) with matching bottom tray, made of fresh virgin lldpe (linear low-density polyethylene) material, uv stabilized, weather resistant and suitable for indoor and outdoor horticultural applications. the planter shall be of robust roto-moulded construction, non-toxic, crack resistant, fade resistant and capable of withstanding adverse climatic conditions. the surface finish shall be premium decorative marble/stone effect in approved shades such as white marble, grey marble, sandstone, marble stone, grey granite marble and other similar finishes as approved by the engineer-in-charge. reference image is attached in technical specifications. the planter shall be rectangular in shape with a stable base and proper drainage arrangement to ensure healthy plant growth and avoid water stagnation. the item shall include all cost towards material, manufacturing, transportation, loading, unloading, handling, stacking and placing at site in position complete as per approved sample and direction of engineer-in-charge., providing labour, materials, tools and plants, equipment, transportation and all other incidental arrangements required for execution of horticulture and landscaping works as per site requirements under relevant items of cpwd dsr horticulture and landscaping 2025, complete in accordance with cpwd specifications, latest amendments, and directions of the engineer-in-charge. a provisional amount of rs. 600000.00 (rupees six lakh only) excluding gst has been kept under this item for execution of works under cpwd dsr horticulture and landscaping 2025. ............ please refer boq item no.15 at boq page no. 9 of atc document.
Agency / Dept :
airports authority of india AAI
Due Date :
Jul 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16084294
Location : kargil , ladakh
Source : GEM Tenders
tender for supply of spares tlop filter , return oil filter , guide van lock nut , guide van locking , sensor for guide vane signal , guide position indicator , speed monitor , tripping relay 24v dc , sensor part no87768 , hrc fuse , aux sync relay , triping coil 11kv vcb , bolt 18 19mm 4 inch long , bolt 32mm 4 inch long , bolt 24mm 4 inch long , bakelite sheet , ss welding rod , ms welding rod , copper shim , nitrogen gas , glass fuse 10amp , contactor 25 amp , nuts and bolts for deflector plate , sensor of sizes , nozzle , opu filter only , diode forward , diode reverse , battery 12v , nde bearing , 11kv outdoor cable kit , 11kv indoor cable kit , battery charger 110v 48v 24v dc , alternator diode of sizes , cooling filter , gland rope , gasket roll , fuses 62a 32a 25a 35a 6a 4a glass fuse 3 no ech , master trip relay vx110 125 , gate valve , bypass gate valve , cotton waste , dhoti cloth , lubricant oil, supply of spares, tlop filter, return oil filter, guide van lock nut, guide van locking, sensor for guide vane signal, guide position indicator, speed monitor, tripping relay 24v dc, sensor part no87768, hrc fuse, aux sync relay, triping coil 11kv vcb, bolt 18 19mm 4 inch long, bolt 32mm 4 inch long, bolt 24mm 4 inch long, bakelite sheet, ss welding rod, ms welding rod, copper shim, nitrogen gas, glass fuse 10amp, contactor 25 amp, nuts and bolts for deflector plate, sensor of sizes, nozzle, opu filter only, diode forward, diode reverse, battery 12v, nde bearing, 11kv outdoor cable kit, 11kv indoor cable kit, battery charger 110v 48v 24v dc, alternator diode of sizes, cooling filter, gland rope, gasket roll, fuses 62a 32a 25a 35a 6a 4a glass fuse 3 no ech, master trip relay vx110 125, gate valve, bypass gate valve, cotton waste, dhoti cloth, lubricant oil
Agency / Dept :
jammu and kashmir power development department JKPDD
Due Date :
Jul 16, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16157895
Location : bokaro , jharkhand
Source : GEM Tenders
corrigendum tender for closing spring assembly including closing spring, dub bush and spring holder assembly of vm12 breaker , dashpot assembly for 6.6 kv 1250 a vaccum circuit breaker , set of pins for vcb, vm-12, bhel drg nos: 25211001581-002: 3 nos, 25211001581-004: 3 nos, (2521100158 , set of clips for vcb make bhel, type: vm- 12, bhel drg nos: 25211001588- 001: 2 nos, 25211001588- 002 , closing coil/tripping coil (220v dc) for 6.6kv vaccum circuit breaker bhel make type vm 12 , breaker auxiliary 52c/d contact operating leaver assembly with switches 6no+ 6nc for bhel make 6.6kv , breaker auxiliary 52a/b contact operating leaver assembly with switches 6no+ 6nc for bhel make 6.6kv , spring charging motor for vm-12, 7.2kv, indoor vacuum circuit breaker. make: bhel. drg. no. 25211001 , aux switch 16 way , closing unit assembly , rack-in/rack-out handle , service/ test position limit switch , complete assembly of plug and socket(32-pin plug & socket) assembly with interlock. bhel drg no: 352 , tripping spring assembly set bhel drg. 35211001536-v00
Agency / Dept :
damodar valley corporation DVC
Due Date :
Jul 15, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16258040
Location : haveli , maharashtra
Source : GEM Tenders
tender for , operation and maintenance of electrical systems/electrical installations - supplying and erecting electronic type driver for indoor led 5w-9w fixtures suitable to operate on 230v ac 50 hz as per specification , operation and maintenance of electrical systems/electrical installations - supplying and erecting crca powder coated corridor/passage light led fitting 4 feet max 17w with high transitivity diffuser with system as per specification , operation and maintenance of electrical systems/electrical installations - supplying and erecting energy saving ceiling fan 230 v ac 50 cycles 1200 mm complete erected in position as per specification , operation and maintenance of electrical systems/electrical installations - supplying and fixing anchor type fastener fan hook, with 2 nos of 10 mm dia x 75 mm long with necessary materials for ceiling fan as per specification , operation and maintenance of electrical systems/electrical installations - supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box as per specification , operation and maintenance of electrical systems/electrical installations - supplying and erecting b class gi pipe / ms pipe down rod duly painted for fan complete erected with pvc three core flexible cable 1 sq mm copper as per specification , operation and maintenance of electrical systems/electrical installations - supplying, erecting & marking spmcb 6a to 32a, c-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification , operation and maintenance of electrical systems/electrical installations - supplying, erecting and marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification , operation and maintenance of electrical systems/electrical installations - supplying and erecting triple pole and neutral distribution board tpndb, spmcb of 4 ways/phase 12 polesas per specification , operation and maintenance of electrical systems/electrical installations - supplying, erecting and marking tpmcb 40a to 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification , operation and maintenance of electrical systems/electrical installations - providng earthing with galvanized iron earth plate size 60 x 60 x 06 cm complete with all materials, testing & recording the results as per specification , operation and maintenance of electrical systems/electrical installations - supplying and erecting mains with 2x1 point 5 sq mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places per specificatio.. , operation and maintenance of electrical systems/electrical installations - supplying and erecting mains with 2x2 point 5 sq mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places per specificatio.. , operation and maintenance of electrical systems/electrical installations - supplying and erecting mains with 1x1 point 5 sq mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specifica.. , operation and maintenance of electrical systems/electrical installations - supplying and erecting mains with 1x2 point 5 sqmm fr standered/solid copper pvc insulated wire laid in-provided conduit/ trunking / inside pole/bus bars as per specification , operation and maintenance of electrical systems/electrical installations -
Agency / Dept :
district panchayat DP
Due Date :
Jul 25, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Indoor Positioning. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Indoor Positioning sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Indoor Positioning Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Indoor Positioning, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Indoor Positioning Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Indoor Positioning Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Indoor Positioning.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Indoor Positioning depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Indoor Positioning Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Indoor Positioning bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Indoor Positioning. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Indoor Positioning, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Indoor Positioning, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Indoor Positioning?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Indoor Positioning tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Indoor Positioning?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Indoor Positioning, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Indoor Positioning is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All