sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

81Latest Hydraulic power motors Tenders List

Latest Hydraulic power motors Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Hydraulic power motors tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Hydraulic power motors tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Hydraulic power motors Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Hydraulic power motors tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Hydraulic power motors Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Hydraulic power motors Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Hydraulic power motors Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Hydraulic power motors tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Hydraulic power motors Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Hydraulic power motors sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Hydraulic power motors tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Hydraulic power motors tenders.

Is EMD mandatory for all Hydraulic power motors tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Hydraulic power motors work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Hydraulic power motors tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Hydraulic power motors Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17021596
Location : kanpur , uttar pradesh
NEW TENDER
tender for electro hydraulic thruster capacity 18 kg pressure operated 415 v ac 3 phase 50 hz supply ,copper winding moto, electro hydraulic thruster capacity 18 kg pressure operated 415 v ac 3 phase 50 hz supply , copper winding motor ,power 90 watt and current 0.4 amp impeller & body mode of alluminium alloy model st -520 , make -speed of control ,power mech .sci ,arihant,zybc ,anand engineering,speedage. note-instal lation and commissioning to be done by firm along with supply. - warranty period: 30 months after the d ate of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
north central railway NCR
Due Date :
Sep 14, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16886617
Location : tiruchirappalli , tamil nadu
LIVE TENDER
tender for ventilation fan motor, ventilation fan motor (foot mounted induction motor) for lhb power car of rating 5kw, 415vac, 3 phase, 50hz, 1500 rpm (synchronous speed) , ip65, insulation class-h, duty-s1, conforming to is:12615 (2011) or latest. the motor should be m/s abb, mis laxmi hydraulic, m/s crompton, m/s siemens, m/s kirloskar electric make only as per make mentioned at rdso's specification no. rdso/pe/spec/ac/0084-2008, rev.1. - warranty period: 30 months afte r the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Sep 23, 2026 (23 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16877831
Location : east khasi hills , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for electric hydraulic power pack , hydraulic pistol , dc motor 12v 24v 270w , battery lead with terminal , hydraulic power pack operating relay with hydraulic pipe , hydraulic power pack operating remote , 4 sq mm copper wire 10m wire , wooden box 5 ft x 2.5 ft x 2.5 ft , mcb with box , on off switch , battery terminal clip, parts of counter unmanned aircraft system, electric hydraulic power pack, hydraulic pistol, dc motor 12v 24v 270w, battery lead with terminal, hydraulic power pack operating relay with hydraulic pipe, hydraulic power pack operating remote, 4 sq mm copper wire 10m wire, wooden box 5 ft x 2.5 ft x 2.5 ft, mcb with box, on off switch, battery terminal clip
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16901990
Location : ranchi , jharkhand
Source : GEM Tenders
LIVE TENDER
tender for multipurpose wood working machine , submersible motor pump set three phase 5 hp , submersible pump or open well 5hp 3 phase , monoblock pump 2 hp , medium weight chipping hammer , aluminium ladder 20 feet long , hammering drill machine , hydraulic crimper , aluminium ladder 10 feet long , tile or stone or marble cutter, heavy machine purchase, size 13 inch speed of 4 cutting band saw blade length 12 to18 inch electrical motor 3hp 1440 rpm copper coil, multi stage discharge head 260 mtr copper coil, discharge head 24 mtr discharge capacity in litter per hour 16 discharge head 24 meter speed rpm 2810 copper coil, 2 hp single phase rpm 2500 to3000 rpm copper coil, weight 15 to18 kg material of bit h t s noise level 120ds power rating 1510 watt copper coil, 20 feet heavy duty aluminium platform step ladder, mi rhd 22 drill machine having drilling capacity, 8 ton hydraulic crimping tool hydraulic cable crimper hand tool with 16 dies 4 70 cum portable electrical terminal cable wire tool kit, 10 feet long heavy duty aluminium platform step ladder, 1450 watt 125 mm 12000 rpm 3 kg and hex key hexagon socket wrench isi mark or std qlty approved brand
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Sep 12, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812298
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16813901
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for cut section working model of four wheeler chasis with electricals of mpfi engine , cut section working model of synchromesh gear box , cut sectionised assembly of cng kit for mpfi petrol engine , working model of disc brake assembly with caliper assembly , cut section models of automatic transmission , cut section models of cross ply and radial tyres , cut section models of constant, sliding mesh gearbox , cut section models of mock layout of a car , cut section models of power window , cut section models of torque convertor , vacuum assisted hydraulic brake assembly , abs braking system training board simulator, automotive models and cut sections, the model should be a working cut-section model of a four wheeler passenger vehicle chassis complete with mpfi petrol engine and major automotive systems, the model which should give a complete idea of synchronous gear box, the model shall be a cut sectionised assembly of a cng conversion kit suitable for an mpfi petrol engine, working model of disc brake assembly with caliper assembly,the model is equipped with two discs with hubs, two master cylinder, two caliper assembly, etc., cut section model of automatic transmission gear box to show working principle mounted on a suitable stand with electric powered driven by motor with reduction gear box to show motion of automatic gear box, cut section model of radial and cross ply tyre model will be suitably sectioned to demonstrate the internal construction details, the model which should give a complete idea of constant and sliding mesh gear box and its function and working,the gear box with 3 or 4 forward and 1 reverse speed., this demonstration board shall provide a comprehensive understanding of the complete electrical wiring system of a modern passenger car., this model which should give a complete idea of the actual working of power window in vehicle,actual working model of power window of car or suv showing parts like door, glass with motor and its arrangement and operating switch, it will display the internal details such as the stater-turbine, rotor, impeller, tarring ton bearing,and spring loaded clutch-plate, this model which will give a complete idea of vacuum assisted hydraulic brake assembly in vehicle & its function, this will simulate the abs system of a vehicle with 2 channel abs along with all sensors, actuators and provision for fault simulation and rectification.
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16664094
Location : nadia , west bengal
Source : GEM Tenders
LIVE TENDER
tender for workshop items vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
50.04L
View Documents
T18 Ref No : 16933346
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
tender for procurement of jcb 3dx super engine and chassis spares - 334 y4430 motor wiper linkage assembly , 334 y4431 arm wiper blade assembly , 831 00117 bearing , 333 y8382 switch dump , 334 y4403 ring clamping , 332 y4070 capscrew m5 , 333 y4754 stabiliser control rod assembly , 334 y3608 clevis right hand thread , 826 01265 bolt dowel , 819 00070 shim 0 point 5mm , 819 00071 shim 1 point 5mm , 40 302657 cable parking brake , 333 y5772 spring tension brake pedals , 40 303423 bearing self lubricating , 334 y4154 knob with switch , 331 25683 gaiter gear lever non soundproofed , 346 00130 clamp gear lever gaiter , 334 y4375 ring clamp loade , 1391 3105z screw m5 x 20 , 332 y3852 throttle cable assembly , 814 10179 spring , 123 05557 pivot cable , 814 00441 spring torsion , 331 36009 coupling , 646 04628 washer thrust , 332 g3866 cover rear steering column , 332 g3865 cover steering column front , 332 y6914 switch column , 333 y5768 rim steering wheel , 333 u2038 cap steering wheel , 335 y2029 hose 10 bsp hp 700mm , 334 y5393 hose 10 bsp lp 950m , 32ap ba100 hose 3 by 8 bsp 1000 , 335 y4586 hose 08 bsp hp 1910mm a , 335 y4578hose 06 bsp hp 1910mm a , 334 y9373 hose 10 bsp hp 560mm lvb to wa feed pipes , 334 y9370 hose 08 bsp hp 545mm lvb to wa feed pipes , 821 00335 clamp plate , 332 y6152 hose lvb to wa feed pipes , 334 y9374 hose lvb to wa feed pipes , 335 y4389 hose wa feed pipe to lift , 335 y4390 hose wa feed pipe to lift , 612 80079 hose , 612 80099 hose 3 by 8 bsp 530mm long , 335 y3420 hose assembly suction , 2401 0213 o ring , 2201 0012 clip jubilee 46 70mm , 335 y3410 hose tank side , 335 y3389 adaptor , 332 y2910 hose high pressure , 332 y8480 hose 1275 mm , 332 y6630 hose , 332 y6631 hose bottom port , 332 y2165 hose 3 by 8 bsp 1740mm , 332 y2166 hose 3 by 8 bsp 1410mm , 1406 0015 washer bonded 3 by 8 inch , 332 y2057 pipe slew rh , 559 90035 bracket support , 333 y9243 pipe support , 611 20600 hose , 332 y1474 hose , 40 301773 hose unqin , 1620 0002 adapter , 334 y8398 hose 10 bsp lp 2880 , 334 y2241 hose 10 bsp lp 2580 , 701 80324 switch oil temp 5 by 8 inch unf deutsch connector , 334 y5529 hose hoc refer page no 841 , 334 y2240 hose 10 bsp lp 1860 , 332 y6629 hose , 335 y7267 hose 10 bsp hp 2790mm b , 335 y7268 hose 10 bsp hp 2520mm b bottom port , 332 y2234 hose top btm clamp l h , 1356 0205z nut 5 by 8 bsp , 40 302915 hose steer ram lh , 332 y1125 hose high pressure , 334 y1469 pump hydraulic , 335 a8862 pump gear 14cc , 332 y7924 pump seal kit for doze r , 333 y4699 hose 600 mm , 335 g7710 kit seal , 336 d7544 valve main relief 227 bar , 1620 0010 adapter includes o ring , 1620 0007 adapter , 816 90459 adaptor elbow 7 by 16sae x 1 by 4bsp , 816 60050 adapter , 1620 2051 adaptor 1 by 4 inch bsp x 9 by 16 inch sae , 816 90006 adaptor filtered m m , 335 g8251 kit seal , 335 a8878 steering hydrostatick , 1406 0018 washer bonded 1 by 2 inch bsp , 1406 0011 washer bonded 1 by 4 inch , 573 10061 ram steer black service version , 991 00156 kit seal power track rod ram 75mm cyl x 45mm rod , 335 h3924 kit seal , 400 n5542 kit seal , 400 n5514 kit-seal , 40 303399 seal , 336 e7313 bush , 550 40980 plunger cushioning , 336 e7315 kit seal , 332 y5599 kit seal , 333 y6687 bush , 336 f1981 seal kit , 336 c6798 kit seal , 40 300893 filter element , 40 300908 seal , 40 300894 seal , 40 302714 ring packing , 2400 0230 o ring , 332 y4740 hose grease , 1609 0001 adaptor , 332 y8377 pivot pin , 819 00132 spacer grey 50 point 75 borex3 point 5mm thick qty max 1 min 0 , 819 00133 spacer cream 50 point 75mm bore x 4 0mm thick qty max 1 min 0 , 819 00134 spacer yellow 50 point 75mm bore x 4 point 5mm thick qty max 2 min 1 , 819 00135 spacer blue 50 point 75mm bore x 5 point 0mm thick qty max 1 min 0 , 819 00136 spacer red 50 point 75mm bore x 5 point 5mm thick qty max 1 min 0 , 819 00137 spacer red 50 point 75mm bore x 6 point 0mm thick qty max 1 min 0 , 904 50040 seal , 2203 1082 circlip , 829 00548 bush , 914 88100 shaft drive assembly 1275mm long , 914 88200 shaft drive assembly 825mm long , 904 m6779 seal , 438 00006 coupling yoke front axle , 448 36400 kit gear differential , 126 02253 link track rod m24 m22 , 816 20070 adapter , 826 00871 nut , 826 01714 nut 1 inch unf , 40 304511 washer hardened fit under it 2 , 40 304179 wheel nut 3 by 4 inch 16 unf torque 680n m , 458 20611 adapter , 816 60040 nipple screw , 332 y8135 plate brake friction , 332 y8134 plate brake counter , 450 10213 pin reaction , 458 20693 disc park brake , 458 m7581 housing brake piston , 826 00919 dowel , 458 m7582 piston brake , 813 50012 seal brake piston , 813 50026 seal brake piston square section , 814 00365 spring compression , 450 18204 pin brake back off , 2203 1020 circlip , 32 925678 breather , 336 y2353 rim wheel front , 914 49100 shaft drive 2ws 4wd , 826 11635 screw cap screw 3 by 4unfx3 by 4 , 914 60223 driveshaft rear ss700 sideshift , 550 42394 kit spider unqin , 459 10144 valve adapter block assembly ss700 low ratio , 459 70317 yoke coupling 1480 35 t , 25 220998 valve solenoid assembly , 332 y8061 solenoid assembly 3 way , 40 302161 sensor speed , 459 50511 gear 2nd 40t ss700 , 459 50509 gear 1st 44t ss700 20 925552 pump assembly transmission , 1321 3311z bolt m8 x 45 , 823 00291 washer copper m8 , 445 14001 dowel , 1321 0409z screw m10 x 35 , 813 10175 gasket valve block , 1392 3207z capscrew m6 x 25mm , 1392 3108z capscrew m5 x 30 , 581 18063 element transmission filter 94mm long , 816 15184 adapter 1 by 2 inch bspx1 inchunf , 816 80052 plug taper 1 by 4 inch bsp , 813 50042 gasket , 459 70199 block selector , 445 26110 screw , 332 y2558 setscrew m10x1 point 5x30 , 332 y2559 plug relief valve , 814 00222 spring , 32 902200 strainer suction , 813 50027 gasket , 40 303401 plug detent , 814 00354 spring , 40 303627 ball 11mm diameter , 40 303372 spacer main shaft , 459 70206 spacer idler gear , 823 00451 washer thrust 38 point 1mm x 55 point 55mm x 1 point 55mm , 701 m7305 switch oil pressure m12 , 813 50041 seal rear , 816 80051 plug 1 by 8 inch tapered , 814 10170 spring compression , 460 17603 baffle , 821 10223 circlip internal , 439 00090 kit shim 79 point 5 od x 72 id , 40 303537 kit shim 72 point 5 od x 65 id , 445 05501 lever gearshift , 816 13382 adapter hose , 332 y0160 gaiter gear lever , 904 14300 seal ring turquoise , 445 19808 washer thrust 3 point 5mm thick phosphated , 445 12307 plate counter , 445 03205 plate friction , 828 00414 gemarpts म3 खोजी गई 6/7ं8स / searched o ring 123 point 5mm i d
Agency / Dept :
indian army
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16933442
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
tender for boq te 04 -hydraulic stg presser pipe , dvr construction of dvr side glass , door glass lh and rh , half shaft seal , fly wheel sensor , veh speed sensor , self pinon , fuel filter , brake master cyl , wheel cyl , clutch plate , alternator regulator cut out , discharge line assy , ac blower fan motor assy , door glass mechanism rh and lh side , accelerator padel sensor , cam sensor , oil pressure and temp sensor , coolant temp sensor , clutch booster assy , clutch master cyl , digital meter , beta trolly tool box , cutting plair , wire cutter , t spanner 8 to 14 , condenser fan assy , compressor no 72 , water pump fan belt , thermostat valve , radiator cap , head gasket , pre fuel filter , wire stripper , diode 4 amp , diode 6 amp , dc power supply , transformer 18v , transformer 24v , lens opener tool set , tweezer , air filter , mounting pad, boq te 04, hydraulic stg presser pipe, dvr construction of dvr side glass, door glass lh and rh, half shaft seal, fly wheel sensor, veh speed sensor, self pinon, fuel filter, brake master cyl, wheel cyl, clutch plate, alternator regulator cut out, discharge line assy, ac blower fan motor assy, door glass mechanism rh and lh side, accelerator padel sensor, cam sensor, oil pressure and temp sensor, coolant temp sensor, clutch booster assy, clutch master cyl, digital meter, beta trolly tool box, cutting plair, wire cutter, t spanner 8 to 14, condenser fan assy, compressor no 72, water pump fan belt, thermostat valve, radiator cap, head gasket, pre fuel filter, wire stripper, diode 4 amp, diode 6 amp, dc power supply, transformer 18v, transformer 24v, lens opener tool set, tweezer, air filter, mounting pad
Agency / Dept :
indian army
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Hydraulic Power Motors. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Hydraulic Power Motors sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Hydraulic Power Motors Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Hydraulic Power Motors, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Hydraulic Power Motors Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Hydraulic Power Motors Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Hydraulic Power Motors.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Hydraulic Power Motors depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Hydraulic Power Motors Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Hydraulic Power Motors bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Hydraulic Power Motors. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Hydraulic Power Motors, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Hydraulic Power Motors, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Hydraulic Power Motors?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Hydraulic Power Motors tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Hydraulic Power Motors?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Hydraulic Power Motors, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Hydraulic Power Motors is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All