sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

29Latest Holding device Tenders List

Latest Holding device Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Holding device tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Holding device tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Holding device Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Holding device tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Holding device Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Holding device Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Holding device Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Holding device tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Holding device Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Holding device sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Holding device tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Holding device tenders.

Is EMD mandatory for all Holding device tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Holding device work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Holding device tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Holding device Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16908213
Location : bhopal , madhya pradesh
LIVE TENDER
corrigendum tender for set of holding device for vestibule foot plate, set of holding device for vestibule foot plate to drg.no.t-2-5-699, alt-n/5, c ol-iii = 01no. and col-iv= 01no. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
west central railway WCR
Due Date :
Sep 21, 2026 (21 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16808634
Location : gurdaspur , punjab
Source : GEM Tenders
LIVE TENDER
tender for drug and consumable hip prosthesis am fenestrated curved stem design ii chromcobatt excel , 41 mm , hip prosthesis am fenestrated curved stem design ii chromcobatt excel , 43 mm , hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 45 mm , hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 47 mm , hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 49 mm , hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 51 mm , cannulated screw, 4.5mm, self tapping short thread 26 mm , cannulated screw, 4.5mm, self tapping short thread 30 mm , cannulated screw, 4.5mm, self tapping short thread 34 mm , cannulated screw, 4.5mm, self tapping short thread 42 mm , cannulated screw, 4.5mm, self tapping short thread 46 mm , cannulated screw, 4.5mm, self tapping short thread 50 mm , cannulated screw, 4.5mm, self tapping short thread 54 mm , cannulated screw, 4.5mm, self tapping short thread 60 mm , cannulated screw, 4.5mm, self tapping short thread 68 mm , cannulated screw, 4.5mm, self tapping short thread 72 mm , cannulated screw, 4.5mm, self tapping or fully threaded 26mm , cannulated screw, 4.5mm, self tapping or fully threaded 30mm , cannulated screw, 4.5mm, self tapping or fully threaded 34mm , cannulated screw, 4.5mm, self tapping or fully threaded 40mm , cannulated screw, 4.5mm, self tapping or fully threaded 42mm , cannulated screw, 4.5mm, washer 10.0mm dia , cortex screw 2.7mm x 6mm , cortex screw 2.7mm x 8mm , cortex screw 2.7mm x 10mm , cortex screw 2.7mm x 12mm , cortex screw 2.7mm x 14mm , cortex screw 2.7mm x 16mm , cortex screw 2.7mm x 18mm , small washers 7mm,2.7mm screws , cortical screws 3.5mm 20 tpi, 10 mm , cortical screws 3.5mm 20 tpi, 12 mm , cortical screws 3.5mm 20 tpi, 14 mm , cortical screws 3.5mm 20 tpi, 16 mm , cortical screws 3.5mm 20 tpi, 18 mm , cortical screws 3.5mm 20 tpi, 20 mm , cortical screws 3.5mm 20 tpi, 22 mm , cortical screws 3.5mm 20 tpi, 24 mm , cortical screws 3.5mm 20 tpi, 26 mm , cortical screws 3.5mm 20 tpi, 28 mm , lc dcp plate small 7 hole , lc dcp plate small 8 hole , supra condylar nail size 10 x 150 mm , sterile disposable u drape with tube holders , olecranon plate left with 4 compatible cortical screws , chlorhexidine hand scrub brush , washer for screw large 13 mm,titanium , cancellous screws small fragment 4.0 mm, partially threaded, thread length 16 mm , minifragment plate 2.7 mm,6 screws,titanium , clavicular hook plate lcp complete , proximal humerus anatomical locking plate complete , proximal femoral anatomical locking plate , proximal tibial lateral periarticular locking plate system , proximal medial tibial locking plate system , anterolateral distal tibial periarticular plate system , distal tibial medial low profile periarticular plating system , antegrade femoral nail system , antibiotic coated femoral nail , mono rail external limb reconstruction system , ilizarov fixator frame complete set for deformity correction tibia, adult , distal radius external fixator system with distractor compression unit , cemented modular bipolar hip prosthesis with colarless polished femoral stem , cast cover leg , cast cover arm , commode chair , cervical pillow large , gel exercise ball - medium , finger cot splint , metatarsal pad, silicon or carbon copolymer , neoprene anklet, size s m l xl , pelvic binder size l xl xxl , hot and cold pack size universal - reusable , finger exerciser with spring , flex finger splint , frog finger splint , protector finger splint , thera band , adjustable resistance tubes , coccyx cushions soft , spring hand exerciser , pcl brace , clavicle brace size s m l , wrist and, hip prosthesis am fenestrated curved stem design ii chromcobatt excel , 41mm, hip prosthesis am fenestrated curved stem design ii chromcobatt excel , 43mm, hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 45mm, hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 47mm, hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 49mm, hip prosthesis am fenestrated curved stem design ii chromcobatt excel, 51mm, cannulated screw,4.5mm, self tapping short thread 26 mm, cannulated screw, 4.5mm, self tapping short thread 30 mm, cannulated screw, 4.5mm, self tapping short thread 34 mm, cannulated screw, 4.5mm, self tapping short thread 42 mm, cannulated screw, 4.5mm, self tapping short thread 46 mm, cannulated screw, 4.5mm, self tapping short thread 50 mm, cannulated screw, 4.5mm, self tapping short thread 54 mm, cannulated screw, 4.5mm, self tapping short thread 60 mm, cannulated screw, 4.5mm, self tapping short thread 68 mm, cannulated screw, 4.5mm, self tapping short thread 72 mm, cannulated screw, 4.5mm, self tapping or fully threaded 26mm, cannulated screw, 4.5mm, self tapping or fully threaded 30mm, cannulated screw, 4.5mm, self tapping or fully threaded 34mm, cannulated screw, 4.5mm, self tapping or fully threaded 40mm, cannulated screw, 4.5mm, self tapping or fully threaded 42mm, cannulated screw, 4.5mm, washer 10.0mm dia, cortex screw 2.7mm x 6mm, cortex screw 2.7mm x 8mm, cortex screw 2.7mm x 10mm, cortex screw 2.7mm x 12mm, cortex screw 2.7mm x 14mm, cortex screw 2.7mm x 16mm, cortex screw 2.7mm x 18mm, small washers 7mm (2.7mm screws), cortical screws 3.5mm 20 tpi, 10 mm, cortical screws 3.5mm 20 tpi, 12 mm, cortical screws 3.5mm 20 tpi, 14 mm, cortical screws 3.5mm 20 tpi, 16 mm, cortical screws 3.5mm 20 tpi, 18 mm, cortical screws 3.5mm 20 tpi, 20 mm, cortical screws 3.5mm 20 tpi, 22 mm, cortical screws 3.5mm 20 tpi, 24 mm, cortical screws 3.5mm 20 tpi, 26 mm, cortical screws 3.5mm 20 tpi, 28 mm, lc dcp plate small 7 hole, lc dcp plate small 8 hole, supra condylar nail size 10 x 150 mm, sterile disposable u drape with tube holders, 80 inch x 124 inch , 4 inch x 44 inch split (usfda approved and compliant with iso 11607-2, iso 11810 1 standards) 10 perc variation in size acceptable, olecranon plate left (6 holes) with 4 compatible cortical screws and 4 compatible locking screws (usfd approved and mri compatible), chlorhexidine hand scrub brush, washer for cannulated cancellous screw large 13 mm (titanium), cancellous screws small fragment 4.0 mm, partially threaded, thread length 16 mm(titanium), minifragment plate 2.7 mm with 6 screws (titanium), clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws, left or right side (titanium), proximal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws (titanium)., proximal femoral anatomical locking plate (right or left)(5 to 12 locking holes in shaft) complete construct with 06 cortical screws and 06 locking screws (titanium), proximal tibial lateral periarticular locking plate system (left or right) complete construct with 04 metaphyseal locking cancellous screws, 02 cortical screws, 03 locking screws. (titanium), proximal medial tibial locking plate system, (left or right), complete construct with 03 locking screws and 03 cortical screws (titanium), anterolateral distal tibial periarticular plate system, (left or right) (5 to 12 locking/combiholes in shaft)complete construct with 06 locking and 03 cortical screws (titanium), distal tibial medial low profile periarticular plating system (left or right) (5 to 12 locking/combiholes in shaft)complete construct with 06 locking screws and 03 cortical screws (titanium), antegrade femoral nail system complete construct (right or left) with 04 locking bolts and 01 end cap (ss), antibiotic coated femoral nail with 4x locking bolts, and 01 end cap (titanium), mono rail external limb reconstruction system (lrs) consisting of following 01 x mono rail 300 mm, 01 x central clamp, 01 x square cd unit 80 mm, 01 x t clamp 01 x swivel clamp, 01 x end clamp, 02 x ha coated conical pins, 04 x conical pins, 04 x schanz pins, 01 x compatible allen key, ilizarov fixator frame complete set for deformity correction tibia, adult, consisting of 10 x160mm carbon fibre half rings,2x 160 mm 5 or 8 carbon fibre rings,1 x 160mm carbon fibre foot frame, 20 x cannulated bolts, 15 x slotted bolts, 25 x 16mm bolts, 50 nuts, 8 x 150mm threaded rods,8x100 mm threaded rods, 8 x 80 mm threaded rods, 4 x universal joints,4 x male hinges,4 x female hinges,4 x rotational translational devices, 4 x graduated telescopic rods 100 mm, 5 x blocks for half pin 1 hole,10 x set screws, 1 x box wrench for nut, 1 x box wrench for bolt stainless steel., distal radius external fixator system with distractor compression unit, 02 x 3.5 mm and 02 x 2mm schanz screws, cemented modular bipolar hip prosthesis with colarless polished femoral stem and compatible bipolar head with highly cross linked polyethylene liner and cobalt chrome femoral head, including centralizer and cement restrictor, cast cover leg(water resistant material, protective sealed cover for cast ), cast cover arm (water resistant material, protective sealed cover for cast ), commode chair ( adult size, firm built metal frame, removable bucket, holding capacity 100 to 150 kg, anti skid, foldable design ), cervical pillow large, gel exercise ball medium, finger cot splint, metatarsal pad, silicon or carbon copolymer, neoprene anklet (size s or m or l or xl), pelvic binder size l or xl or xxl, hot and cold pack size universal reusable, finger exerciser with spring, flex finger splint, frog finger splint, protector finger splint, thera band (latex resistance bands, various sizes and strength levels for physiotherapy exercises), adjustable resistance tubes, coccyx cushions soft, spring hand exerciser, pcl brace, clavicle brace (small or medium or large) (neoprene material), wrist and ankle weight cuff wrap around cuff, fitted with weight suitable for muscle toning and rehabilitation
Agency / Dept :
indian army
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16875615
Location : udhampur , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for 5 mm absorbable tracker fixation device of pgla material and proximal wings for better holding of hernia mesh with 30 tacks , bard 3d max mesh right large 4 x 6 by 10 point 8 cm x 16 cm , bard 3d max mesh left large 4 x 6 by 10 point 8 cm x 16 cm , polypropylene mesh 15 x 15 cm , polypropylene mesh 7 point 5 x 15 cm , polypropylene mesh 30 x 30 cm , polypropelene plus sodium hyluronate carboxymethylcellulose polyethelene glycol and positioning system size 8x10 inches 20 point 3 x 25 point 5cm ellipse , cbd drainage t tube size 10fr , cbd drainage t tube size 12fr , cbd drainage t tube size 14fr , surgicell snow 1 x 2 box of 10 , surgicell snow 2 x 4 box of 10 , surgicel fibrillar 2 x 4 box of 10 foils , surgicel fibrillar 1 x 2 box of 10 foils , hydrogel based tissue separating mesh with monofilament polypropylene one side and absorbable hydrogel barrier on other side st mesh 6 15 point 2 cm circle , hydrogel based tissue separating mesh with monofilament polypropylene one side and absorbable hydrogel barrier on other side st mesh 8 20 point 3 cm circle, rd 93, as per specification
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16900870
Location : jalandhar , punjab
Source : GEM Tenders
LIVE TENDER
tender for online ups (?10 kva) with battery conforming to is 16242 (part 1) (q2) , earth work , cement concrete work , reinforced , sand pit wall with filling loose sand , steel reinforced of r.c.c work , m s bolts round holding down of anchor bolts with nuts and washer plates complete , structural steel work , providing and fixing ms plate 5mm thick , fiber panel , protection railing , adventure stair , providing and fixing store shed at base of the tower incl flooring , movable climbing holds , climbing rope , slithering rope , seat harness , screw carabiners , quick draw , belay device , climb safe , climbing shoes , drill gun , alan key , chalk bag , slithering gloves , crash pad for slithering side , descender, as per specficatiopn
Agency / Dept :
indian army
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents
T18 Ref No : 16724519
Location : thakuedwara , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for leds , resistors kit , capacitors kits , diodes kits , transistors kits , ic 555 timer , lm324 ic , uln2003 ic , push buttons , potentiometers , ldr sensors , buzzers , relay module , breadboards , jumper wire packets , battery cap , crocodile clips , arduino cable , arduino uno compatible , ultrasonic sensor , ir sensor module , pir sensor , rain sensor , soil moisture sensor , mq2 gas sensor , flame sensor , sound sensor , servo motor sg90 , bluetooth hc05 , dht11 sensor , lcd 16x2 i2c , bo motors , wheels , castor wheels , motor clamps , chassis sheets , cable ties , rubber bands , foam sheets 2 by 2 feet , glue guns , glue sticks , fevicol , double tape , color papers , pla filament 1kg , aa cell holder two cell , masking tape , sand paper set , aa and aaa batteries , 9v batteries , battery holders li ion 2 cell , dc jack , wire bundles , heat shrink tubes , marker sets , li ion cell , esp 8266 , esp 32 cable , home automattion kit , l298 motor driver , wire cutter , aligner , screw driver , electric tape , ribbon wire , water pump module , 4 channel relay , dc motor , dpdt switch , fevi quick , led 10 mm , traffic light module , humidifier sensor , mpu 6050 , li ion charger 4 cell , tpu single cell charger , sd card , ecg sensor , heart beat sensor , oled display , dot matrix , seven segment , rgb led , seven segment 4x1 , soldering iron , soldering wire , paper cutter , scissor, l 103 cil, assorted colors, assorted values 100 pc, assorted values 20pc, assorted values 500pc, ne555 timer ic, quad operational amplifier ic, darlington transistor, momentary tactile, assorted resistance value, light sensing, 5v dc electronic buzzer, 1 channel 5v relay module, solderless breadboards, assorted m-m m-f f-m, 9v batteries, aligator clips, usb ato b cable, microcontroller board, hc sr04, infrared detection module, detection sensor, module with sensing plate, soil moiture detection module, smoke or lpg detection, fire detection module, microphone based module, micro servo motor, serial communication module, for ambient temp and humidity, for two wire serial data connection, for mobile robot traction, for robotic drive systems, two wheeled differntialdrive robots, onto stuctural chasis plates, for motors and power sources, for harness organization, for holding, for physical modeling, bonding of cardboard, for sticking objects, for bonding cardboard wood, for mounting light sensors, assorted colored craft papers, biodegradables 3d printing filament, plastic holder for two aa batteries, forlabelling and craft work, for smoothing wood plastic and metal, 1 point 5v dry cells equal quantity, for circuits sensors and robotics, holder for rechargable cells, for dc power supply, assorted connecting wires for circuits, insulated tubes used to protect wire, colored markers for labeling, rechargble lithium ion battery cell 3 point 7v, for iot projects, for programming and powering esp32 board, for controlling dc and stepper motors, for cutting electrical wires, for precise positioning and alignment, for tightening screws, for protecting electrical joints, for electronic connections, for water based automation project, for controlling hing voltage devices, for robootic and mechanical projects, for circuits control, for model making, for indicator and display application, for stem projects, for measuring moisture or humidity in air, for measuring acccelaration and angular motion, for charging four li ion cells, for charging single li ion cells, for storage data class 10 64 gb, for detecting and monitoring ecg signal, for measuring heart rate, for display data and sensor reading, for display symbols and patterns, for displaying numerical values, for multicolor indication and display, for displaying four digit numerical value, for soldering electronic component, for cutting craft materials, for cutting objects
Agency / Dept :
navodaya vidyalaya samiti NVS
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16446029
Location : jabalpur , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for 127 x eoi items v4 rus twin 56 chzu 562 assy 10 11 cable , v4 rus twin assy 1 15 56 chzu 562 blind with gear , v4 rus twin 65 chzu 562 29 clips , v4 rus twin 4 32 56 chzu 562 gasket , v4 rus twin assy 8 56 chzu 562 fork , v4 rus twin 56 chzu 562 assy 14 1 wire with lug , v4 rus twin assy 3 53 56 chzu 562 pin , v4 rus twin assy 3 13 56 chzu 562 spring , v4 rus twin 56 chzu 562 assy 10 1 wire with lug , v4 rus twin 56 chzu 562 3 elavation scale , v4 rus twin 56 chzu 562 assy 4 3 elastic stop , v4 rus twin assy 13 1 56 chzu 562 wire with lug , v4 rus twin 3 67 56 chzu 562 gasket , v4 rus twin 1 24 56 chzu 562 1 24 scale left hand , v4 rus twin 9 56 chzu 562 screw , v4 rus twin 56 chzu 562 4 25 nut , v4 rus twin 36 chzu 562 4 25 key , v4 rus twin 1 111 56 chzu index , m2 rus twin m3x6 gost b1474 42 locking screw , m2 rus twin gost b1474 42 fillister head screw m5x15 , v4 rus twin 12 51 010 619 mirror , m2 rus twin gost 3128 70 4 pr2 2ax18 pin 4 pr 2 2ax18 , m2 rus twin m8 8 50 06 gost 2528 73 nut , m2 rus twin gost 6402 70 washer 6.65 t 06 , m2 rus twin gost b1473 42 counter sunk head screw m3x10 , m2 rus twin 06 22 grip base , m2 rus twin gost 3128 70 8pr2 2ax40 pin 8 pr 2 2ax40 , m2 rus twin 01 154 adjusting screw cradle assy 01 2a13 , m2 rus twin 03 16 safety lock box holder assy 03 2a13 fig 12 , m2 rus twin 25 60 842 cylinder pin , m2 rus twin assy 3 mech range introduction mechanism , m2 rus twin assy 04 26 stud with left hand lever , m2 rus twin 02 275 holding down latch charriage assy 02 2a13 fig 10 , m2 rus twin 6 1 coupling bolt , m2 rus twin 6 4 nut , m2 rus twin gk1 8 round nut , m2 rus twin assy 12 5 rod with nut , m2 rus twin 02 67 a1 retainer bushing charriage assy 02 2a13 , m2 imb rus twin 0527 tumbler , m2 rus twin bch 10mm n gost 3722 60 balls , v4 rus twin gost 2204 69 15 bulb mn 2.5 0.15 , v4 rus twin tkhp 23 350 cold firing tube , v4 rus twin assy 3 1 51 om 620 cemented lens eye piece , v4 rus twin assy 20a 562 portable lamp , v4 rus twin gost 3057 54 disc spring no 25x45x1.5 , v4 rus twin 56 chzu 562 lamp holder , v4 rus twin assy 1 1051 om 620 cemented lens no 2 reversing prism assy , v4 rus twin 7 51 oyu 619 lens 1st objective , v4 rus twin chzu 562 1 23 scale right hand , v4 rus twin 56 chzu 562 3 25 index , m2 rus twin 25 60 442 conical pin 3x16 , m2 rus twin 25 46 859 spring washer , m2 rus twin 25 46 858 spring washer , m2 rus twin 25 46 255 washer , v4 rus twin 27 51 oyu 619 reflector , v4 rus twin 2ts 27 1 11 ring , v4 rus twin 3 31 chzu 562 nut , v4 rus twin 3 34 56 chzu 562 gasket , v4 rus twin 3 35 56 chzu cover cover , m2 rus twin 2sh7 bag for recoil spring , m2 rus twin assy 5 retracting mechanism , m2 rus twin gk 8 round nut , m2 rus twin assy 12 7 can for lubricant , v4 rus twin 4 25 56 chzu 562 nut , v4 rus twin 1 40 56 chzu 562 gear segment , v4 rus twin 13 51 oyu 618b light filter , v4 rus twin 12 51 ym 619 mirror , v4 rus twin 30 56 chzu 562 clips , v4 rus twin 4 14 56 chzu 562 screw , m2 rus twin 25 46 109 washer 4 001 roct , v4 rus twin 25 46 104 washer , v4 rus twin 25 44 409 nut n16 001 roct 5915 62 , m2 rus twin 25 60 499 conical pin 6x30 , m2 rus twin 25 60 881 cylindrical pin 411 p2 29x10 , v4 rus twin 25 60 862 pin cylindrical pin 3128 60 , v4 rus twin 1 32 56 chzu 562 hinge pin , v4 rus twin 1 139 56 chzu 562 index , v4 rus twin 1 84 56 chzu 562 sector , v4 rus twin 1 77 56 chzu 562 stop , v4 rus twin 1 80 56 chzu 562 locking plunger , v4 rus twin 3 52 56 chzu 562 pin , m2 rus twin 12 2 large screw driver , m2 rus twin 2ya27 box for packing links , m2 rus twin m4x12 gost b1474 42 fillister head screw , m2 rus twin m3x12 gost b1473 42 counter sunk head screw , m2 rus twin m2x6 gost b1474 42 fillister head screw , m2 rus twin m2x4 gost b1476 42 fillister head screw , m2 rus twin m2x3 gost b1476 42 fillister head screw , m2 rus twin m2 6x3 gost b1473 42 counter sunk head screw , m2 rus twin m2 6x5 gost b1473 42 counter sunk head screw , m2 rus twin m3x5 gost b1476 42 counter sunk head screw , m2 rus twin m3x7 gost b1473 42 fillister head screw , m2 rus twin sk 2 6x3 locking screw , m2 rus twin m4x8 gost b1474 42 fillister head screw , m2 rus twin m4x10 gost b1474 42 counter sunk head screw , m2 rus twin m4 6gx8 66.50.06 gost b1476 75 screw , m2 rus twin assy 2 2yu 2 recoil spring mounting device , m2 rus twin 07 21 gear turning mechanism , m2 rus twin 02 253 ring , z6 rus twin misc mrtu 25fo 337 006 lamp mn 13.v 0.16a , m2 rus twin gost 7275 75 wrench 7813 0034 , m2 rus twin m3x6 gost b1473 42 fillister head screw , m2 rus twin m4x15 gost b1473 42 fillister head screw , m2 rus twin assy 03 7 right hand cam plate , m2 rus twin assy 1 2 barrel carring handle , m2 rus twin assy 02 41 wire with tips , m2 rus twin m3x8 gost b1474 42 counter sunk, 23mm twin gun
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16033024
Location : bhopal , madhya pradesh
tender for set of holding device for vestibule foot plate, set of holding device for vestibule foot plate to drg.no.t-2-5-699, alt-n/5, c ol-iii = 01no. and col-iv= 01no. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
west central railway WCR
Due Date :
Aug 21, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16409129
Location : chennai , tamil nadu
tender for supply of one pair of holding device (rh & lh), supply of one pair of holding device (rh & lh) to drg no.icf/special repair dmu/dtc/b-2-5- 003, col. i & ii, alt- b/2. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/v endtendordetnew.php using key:0726h5pxnkm1890 - warranty period: 30 months after the date o f delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs
Agency / Dept :
integral coach factory ICF
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16426758
Location : chennai , tamil nadu
tender for supply of one pair of holding device (rh & lh), supply of one pair of holding device (rh & lh) to drg no.icf/special repair dmu/dtc/b-2-5- 003, col. i & ii, alt- b/2. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/v endtendordetnew.php using key:0726h5pxnkm1890 - warranty period: 30 months after the date o f delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs
Agency / Dept :
integral coach factory ICF
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Holding Device. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Holding Device sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Holding Device Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Holding Device, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Holding Device Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Holding Device Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Holding Device.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Holding Device depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Holding Device Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Holding Device bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Holding Device. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Holding Device, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Holding Device, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Holding Device?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Holding Device tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Holding Device?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Holding Device, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Holding Device is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All