sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

119Latest Harness belt Tenders List

Latest Harness belt Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Harness belt tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Harness belt tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Harness belt Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Harness belt tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Harness belt Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Harness belt Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Harness belt Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Harness belt tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Harness belt Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Harness belt sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Harness belt tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Harness belt tenders.

Is EMD mandatory for all Harness belt tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Harness belt work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Harness belt tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Harness belt Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16992929
Location : gurdaspur , punjab
Source : GEM Tenders
NEW TENDER
tender for chain , chain guard , cylinder piston , piston set , carburetor , tank cap oil , petrol tank cap lid , muffler silencer , air filter , fan housing complete , cylinder with piston assy , spark plug , tank cap , recoil assy , cylinder with piston , gear head , piston with rin , accelettor wire , double harness belt , insulator fs 410 , cylinder assy fs410 , cylinder assy fs460 , piston assy fs410 , piston assy fs460 , gas kit sets , aluminium handle , guard chassi strip , muffler silencer , complete fuel tank assy , fuel tank lid , starter grip , auto cut , blade 3 teeth , choke lever knob , support , carburettor , air filter bolt , cylinder kit bolt , nut 08 number , control handle , shroud, spare parts of brush cutter, chain saw, air blower, tree pruner, brush cutter
Agency / Dept :
indian air force IAF
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16994381
Location : amritsar , punjab
Source : GEM Tenders
NEW TENDER
tender for pump drive shaft , spider kit , steiner option std , flexible pipe , seal kit , bush , thrust washer bush , harness shuttle solenoid , column switch , hyd filter , bucket cylinder head end hose , loader arm pin bucket end , arm cylinder seal kit , bush lift cylinder , fan belt vee ribbed , suction hose hyd pump , hand pump seal kit , flat face coupling set , bucket intermediate hose , fuel filter catridge , element lubricating oil filter , air filter element inner , air filter element outer , nut lock, spare parts for ssl, as per technical specification
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16837575
Location : tiruchirappalli , tamil nadu
Source : GEM Tenders
LIVE TENDER
tender for supply of 1.5 mfd indoor blower capacitor , supply of 3mfd capacitor , supply of 4 mfd capacitor , supply of 5mfd capacitor , supply of 50mfd capacitor , supply of r22 refrigerant gas , supply of r32 refrigerant gas , supply of 410a refrigerant gas , supply of blue fin copper condenser coil for 1.5tr split ac units , supply of blue fin copper condenser coil for 2 tr split ac units , supply of 1.5tr rotary refrigeration compressor for split ac unit , supply of 2tr rotary refrigeration compressor for split ac unit , supply of condenser fan motor , supply of condenser heavy duty fan blade , industrial safety belt harness full body fall protection with scaffolding hook double lanyard unisex full body adjustable shock absorber climbing harness safety belt , supply of butane c4h10 welding gas tin 200 grams per tin and the make is weld man , supply of copper welding rod , 2.5 sq mm 4 core molded flexible copper cable 100 mtr coil , supply of flexible drain hose double coated 50 ft length for air conditioner purpose , single pole ac contactor 20a , ac wiring kit compressor with heavy clips , wiring tag 8 length 100 pieces , packing tape , supply of insulation tape , supply of pvc plast adhesive duct tape white roll , 12mm nylon rope polyamine retain and certified iso company braided twisted and twin rope string 45meter , heavy duty 1.8 cfm by 50 ltrs by min single stage 1 by 4 hp rotary vane by vacuum pump for ac by refrigeration vp115 black , 35 by 8 metal screw box 100 pieces , wooden wall plug pocket 100 pieces , supply of 5 by 8 16mm pvc clip with concrete nail , 1 by 4 flare nut , 1 by 2 flare nut , 5 by 8 flare nut , 2.5 core bit steel finish , 6 x 4 hylam sheet , 4kva stabilizer , 5kva stabilizer , 12mm iron pvc coated garden fencing net mesh 3 feet height uv stabilized net green color , outdoor fan grill pvc unbreakable size 18 x 18 , indoor and outdoor pcb for 1.5tr 2tr invertor ac units, ac spares, as per atc
Agency / Dept :
national institute of technology NIT
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16898609
Location : champawat , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for mt spares pump tyre foot lorry type , gun grease hand pom pom type b , block jack , clip hose warm drive type 5 8 to 7 8 , chain assy tyre parsons single type for , box tin lamp filament size 102mm x 83mm , brake hose , poly vee belt 4 pk 1030 samsons , rubber hose , tool bag 442 079 600 074 , wheel scotches mt 13290 000857 , light extension inspection no 2 with 10 , tensioner comp timing belt , shoe set rear brake , pad , switch assy , warning triangular , filter fuel assy , filter fuel , cock shutoff screw stem , oil seal ring , driver cabin door lock left , filter cum water separator , engine mounting pad , sliding disc , roller ring , cartridge eng starter primary cartridge , light indicator , isolator switch , elbow hose , spring leaf , brake switch relay 24v 30a alt fn200800 , warning triangle , fuel filter fs 1212 , lower drawer , connecting hose assy , pump fuel injection rotary , assy mudflap rear , lever shaft , dual brake valve voss , triangle kit bag small , wheel box , assy blower , field coil assy , solenoid switch , assy lamp warming indicator 4 bank 24v , assy motorised head lamp complete 24v rh , speedometer 1 0 825 , plug expansion , seal kit trunnion cover , fluid container clutch , head luboil filter with adopter , rear wind shield rh , box spanner 27 af , tail light vehicular , assy suction tube with strainer , cover assy 1 75 inch spline dia , front spring shackle with bushing , adapter for oil pr transducer , oil filter assy improved , leaf 7th , filter element fluid pressure , assy window regulator lh , combi switch ms harness , assy rubber support front , assy cylinder head complete , leaf 6th front spring , air filter , insp lamp with 10m cable comp w single , bulb rl 12v 21din 72601 , fuel flexible pipe , cylinder block std , wiper timer 24v , assy blinker lamp l h , gasket valve cover , speedometer li , gasket cylinder head , oil seal , service indicator , major repair kit for master cylinder , brake shoe with lining std , tyre inflating hose with nipple 5 70m lo , bucket water canvas 6 , seat cover , tool bag , adjustable spanner 8 , bucket water canvas mk vi , chassis record bag , jack with handle , tyre inflator hose , double face sledge hammer with handle , lamp cab interior under body , allen key 12mm af , tyre lever , de spnr 10x11 mm , ring spanner 12x13mm , lever tyre spoon wheel repair tool , de spanner 5 16x3 8 bsf , cutting plier , u bolt front spring rh , king pin , front direction indicator rh , reverse light switch , gauge tyre pressure 30 kpa , adjustable wrench , adjustable wrench 8 , collet valve , solution valcanising tube 01 tube of 75 , insert and valve exhaust , rubber hose radiator to engine , pump fuel transfer , pre filter sleeve , kit brake lining front o s 1 per axle , door glass rh , tube inner pneu 28x9-15 , tube inner pneu 6.50-10, pump tyre foot lorry type, gun grease hand pom pom type b, block jack, clip hose warm drive type 5 8 to 7 8, chain assy tyre parsons single type for, box tin lamp filament size 102mm x 83mm, brake hose, poly vee belt 4 pk 1030 samsons, rubber hose, tool bag 442 079 600 074, wheel scotches mt 13290 000857, light extension inspection no 2 with 10, tensioner comp timing belt, shoe set rear brake, pad, switch assy, warning triangular, filter fuel assy, filter fuel, cock shutoff screw stem, oil seal ring, driver cabin door lock left, filter cum water separator, engine mounting pad, sliding disc, roller ring, cartridge eng starter primary cartridge, light indicator, isolator switch, elbow hose, spring leaf, brake switch relay 24v 30a alt fn200800, warning triangle, fuel filter fs 1212, lower drawer, connecting hose assy, pump fuel injection rotary, assy mudflap rear, lever shaft, dual brake valve voss, triangle kit bag small, wheel box, assy blower, field coil assy, solenoid switch, assy lamp warming indicator 4 bank 24v, assy motorised head lamp complete 24v rh, speedometer 1 0 825, plug expansion, seal kit trunnion cover, fluid container clutch, head luboil filter with adopter, rear wind shield rh, box spanner 27 af, tail light vehicular, assy suction tube with strainer, cover assy 1 75 inch spline dia, front spring shackle with bushing, adapter for oil pr transducer, oil filter assy improved, leaf 7th, filter element fluid pressure, assy window regulator lh, combi switch ms harness, assy rubber support front, assy cylinder head complete, leaf 6th front spring, air filter, insp lamp with 10m cable comp w single, bulb rl 12v 21din 72601, fuel flexible pipe, cylinder block std, wiper timer 24v, assy blinker lamp l h, gasket valve cover, speedometer li, gasket cylinder head, oil seal, service indicator, major repair kit for master cylinder, brake shoe with lining std, tyre inflating hose with nipple 5 70m lo, bucket water canvas 6, seat cover, tool bag, adjustable spanner 8, bucket water canvas mk vi, chassis record bag, jack with handle, tyre inflator hose, double face sledge hammer with handle, lamp cab interior under body, allen key 12mm af, tyre lever, de spnr 10x11 mm, ring spanner 12x13mm, lever tyre spoon wheel repair tool, de spanner 5 16x3 8 bsf, cutting plier, u bolt front spring rh, king pin, front direction indicator rh, reverse light switch, gauge tyre pressure 30 kpa, adjustable wrench, adjustable wrench 8, collet valve, solution valcanising tube 01 tube of 75, insert and valve exhaust, rubber hose radiator to engine, pump fuel transfer, pre filter sleeve, kit brake lining front o s 1 per axle, door glass rh, tube inner pneu 28x9-15, tube inner pneu 6.50-10
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16898470
Location : kangra , himachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for ssl heman 175 vectra 10 x 321 lift cyl seal kit , 10 x 323 bucket cyl seal kit , 3h0439 coupling female , 3h0440 coupling male , 3c0191 hose set , 3c0660 teeth set earth auger , 3h0269 cab lift pump , 3h0067 plate assy fiber , 3h0068 plate fiber , 1d0068 gear lever knob , 3520655mi ball joint , 3j0132 gear glass , 3j0120 rubber beading , 1d0039 fan cabin , 3b0229 pin door lock , 6108843m horn 12 v , 3d0049 duel indicator hyd clog , 3d0048 duel indicator bty heater , 3d0047 duel indicator water temp oil pressure , 3d0057 cabin harness for skid , 3d0056 chassis harness , 3d0058 dash board harness lh , 3d0059 dash baord harness rh , flasher flasher unit 12 v , fuse fuse 25 amp , fuse fuse 15 amp , 340244 positive bty cable , 340242 negative bty cable , 3d0015 bty isolator , 3d0010 temp sensor unit eng oil , 3d0045 water temp sensor unit , 10 x 454 element hyd filter , x3 ixc vectra 3h0459 filler cap ftc , x3 ixc cummins 10x550 fan belt , x3 ixc cummins 10x0620 fuel filter cartage , x3 ixc cummins 10x619 eng oil filter , x3 ixc cummins 10x471 air filter inner , x3 ixc cummins 10x472 element air outer , x3 ixc denso 10x631 alternator , x3 ixc denso 10x635 motor starter , x3 ixc vectra 3a0136 cable throttle , cl i 61 vectra 3h0803 auxiliary cable , cl i 61 vectra 3h0134 block , 3d0070 direction inductor light, ssl heman 175 vectra, 10 x 321 lift cyl seal kit, 10 x 323 bucket cyl seal kit, 3h0439 coupling female, 3h0440 coupling male, 3c0191 hose set, 3c0660 teeth set earth auger, 3h0269 cab lift pump, 3h0067 plate assy fiber, 3h0068 plate fiber, 1d0068 gear lever knob, 3520655mi ball joint, 3j0132 gear glass, 3j0120 rubber beading, 1d0039 fan cabin, 3b0229 pin door lock, 6108843m horn 12 v, 3d0049 duel indicator hyd clog, 3d0048 duel indicator bty heater, 3d0047 duel indicator water temp oil pressure, 3d0057 cabin harness for skid, 3d0056 chassis harness, 3d0058 dash board harness lh, 3d0059 dash baord harness rh, flasher flasher unit 12 v, fuse fuse 25 amp, fuse fuse 15 amp, 340244 positive bty cable, 340242 negative bty cable, 3d0015 bty isolator, 3d0010 temp sensor unit eng oil, 3d0045 water temp sensor unit, 10 x 454 element hyd filter, x3 ixc vectra 3h0459 filler cap ftc, x3 1xc cummins 10x550 fan belt, x3 ixc cummins 10x0620 fuel filter cartage, x3 ixc cummins 10x619 eng oil filter, x3 ixc cummins 10x471 air filter inner, x3 ixc cummins 10x472 element air outer, x3 ixc denso 10x631 alternator, x3 ixc denso 10x635 motor starter, x3 ixc vectra 3a0136 cable throttle, cl i 61 vectra 3h0803 auxiliary cable, cl i 61 vectra 3h0134 block, 3d0070 direction inductor light
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16898543
Location : srinagar , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for proc of mt spare lv7 stln x-2306700 warning lamp tow hook fog lamp , lv7 tmb 2702 5450 9950 reveerse light switch , lv7 maruti 09471m12058 bulb parking 40 mp 12v 5w , lv7 maruti 36272m80000 lens back up lh , lv7 maruti 36620m830m0 harness assy wiring no 2 , lv7 maruti 6220 000996 lens , lv7 stln vf b 8785201 s a support water filter , lv7 mpvy 610 01 2575 1 pipe assy , lv7 mpvc 010080 ball joint rh , lv7 stln vf b 2594502 tie rod assy , lv7 mpvy b 3937905 relay valve front , lv7 stln vf f 8399700 spring brake chemre type 16 24 lh , lv7 maruti 24151m86j00 oil seal , lv7 maruti 24151m56b01 flange comp universal jt , lv7 maruti 29610m83001 mounting rh front lh , lv7 maruti 17521m86520 belt water pump , lv7 maruti 15821m830a1 pipe fuel filter to eng , lv7 maruti 37870m80020 switch heater fan , lv7 maruti 6680 000506 cable asy speedometer , lv7 maruti 09305m13002 bush sprg shackle , lv7 maruti 38450m80000 tank assy washer , lv7 maruti 41331m62020 bush , lv7 maruti 51211m54310 reservoir , lv7 maruti 84703m73m00 v12 mirror assy inner rear view , lv7 maruti 83720m80111 trim door lh , lv7 maruti 78241m60002 knob , lv7 mpvy 007 0029 00 pcb gl w153 24v , lv7 mpvy 007 0077 01 dash control glw 161 , lv7 stln vf 6350 72 000099 horn electtrical , lv7 maruti 5340 135143 mounting engine front , lv7 maruti 99000m24120 330 liquid gasket three bond 1207c , lv7 maruti 2930 00684 tank water reserve , lv7 maruti 2940 001046 oil filter assy , lv7 maruti 13840 83011 hose warm air , lv7 maruti 13881 830a0 hose outlet , lv7 maruti 36610m830m0 harness assy wiring no 1 , lv7 maruti 29971 83050 oil seal , lv7 tmb 2786 0199 9973 sealant liquid gasket , lv7 tmb 1428 0599 302 hose clamp tb36 sae ji508 , lv7 tata 2154 2810 0104 assy cable complete , lv7 tmb 2751 1 540 0111 field coil assy , lv7 tmb 2751 1540 0126 brush gear assy , lv7 tmb 2632 4370 0188 graduated hand control valve , lv7 tmb 2782 4370 0193 drying and distributor valve , lv7 tata 2782 4660 9901 cartridge , lv7 tmb 2786 0913 9906 air filter element primary , lv7 tmb 2786 0913 9909 air filter element safety , lv7 tmb 2867 4210 0175 assy spring brake actuator type 16 56 , lv7 tmb 6350 001140 horn 24v , lv7 tata 2069 5010 5834 rubber hose , lv7 tata 207854400107 asy cab lamp with bulb 24 v , lv7 tata 283954440109 assy motorised head lamp complete 24v lh , lv7 tmb 2573 5450 9931 battery cut off switch , lv7 tmb 2576 8110 0153 assy rear view mirror outer lh , lv7 tmb 2786 0999 9920 strainer fuel , lv7 tmb 2786 1460 5802 hose hump , lv7 tata 264172300143 assy door lock lh , lv7 tata 2641 8910 6311 mud flap outer rh wheels , lv6mt12 2786 0911 9904 filter fuel , lv7 mpvy 8003402375 return pipe , lv7 mpvy 640 03 1615 1 flexible pipe , lv7 mpvy f 7403300 loe pressure indicator switch , lv stln vf f 8314800 diagnostic lamp , lv7 stln 2520 72 0468319 s a driven disc , lv6mt12 2910 000007 fuel filter insert , lv7 stln vf 2520 72 0306588 disk clutch vehicular, lv7 stln x-2306700 warning lamp tow hook fog lamp, lv7 tmb 2702 5450 9950 reveerse light switch, lv7 maruti 09471m12058 bulb parking 40 mp 12v 5w, lv7 maruti 36272m80000 lens back up lh, lv7 maruti 36620m830m0 harness assy wiring no 2, lv7 maruti 6220 000996 lens, lv7 stln vf b 8785201 s a support water filter, lv7 mpvy 610 01 2575 1 pipe assy, lv7 mpvc 010080 ball joint rh, lv7 stln vf b 2594502 tie rod assy, lv7 mpvy b 3937905 relay valve front, lv7 stln vf f 8399700 spring brake chemre type 16 24 lh, lv7 maruti 24151m86j00 oil seal, lv7 maruti 24151m56b01 flange comp universal jt, lv7 maruti 29610m83001 mounting rh front lh, lv7 maruti 17521m86520 belt water pump, lv7 maruti 15821m830a1 pipe fuel filter to eng, lv7 maruti 37870m80020 switch heater fan, lv7 maruti 6680 000506 cable asy speedometer, lv7 maruti 09305m13002 bush sprg shackle, lv7 maruti 38450m80000 tank assy washer, lv7 maruti 41331m62020 bush, lv7 maruti 51211m54310 reservoir, lv7 maruti 84703m73m00 v12 mirror assy inner rear view, lv7 maruti 83720m80111 trim door lh, lv7 maruti 78241m60002 knob, lv7 mpvy 007 0029 00 pcb gl w153 24v, lv7 mpvy 007 0077 01 dash control glw 161, lv7 stln vf 6350 72 000099 horn electtrical, lv7 maruti 5340 135143 mounting engine front, lv7 maruti 99000m24120 330 liquid gasket three bond 1207c, lv7 maruti 2930 00684 tank water reserve, lv7 maruti 2940 001046 oil filter assy, lv7 maruti 13840 83011 hose warm air, lv7 maruti 13881 830a0 hose outlet, lv7 maruti 36610m830m0 harness assy wiring no 1, lv7 maruti 29971 83050 oil seal, lv7 tmb 2786 0199 9973 sealant liquid gasket, lv7 tmb 1428 0599 302 hose clamp tb36 sae ji508, lv7 tata 2154 2810 0104 assy cable complete, lv7 tmb 2751 1 540 0111 field coil assy, lv7 tmb 2751 1540 0126 brush gear assy, lv7 tmb 2632 4370 0188 graduated hand control valve, lv7 tmb 2782 4370 0193 drying and distributor valve, lv7 tata 2782 4660 9901 cartridge, lv7 tmb 2786 0913 9906 air filter element primary, lv7 tmb 2786 0913 9909 air filter element safety, lv7 tmb 2867 4210 0175 assy spring brake actuator type 16 56, lv7 tmb 6350 001140 horn 24v, lv7 tata 2069 5010 5834 rubber hose, lv7 tata 207854400107 asy cab lamp with bulb 24 v, lv7 tata 283954440109 assy motorised head lamp complete 24v lh, lv7 tmb 2573 5450 9931 battery cut off switch, lv7 tmb 2576 8110 0153 assy rear view mirror outer lh, lv7 tmb 2786 0999 9920 strainer fuel, lv7 tmb 2786 1460 5802 hose hump, lv7 tata 264172300143 assy door lock lh, lv7 tata 2641 8910 6311 mud flap outer rh wheels, lv6mt12 2786 0911 9904 filter fuel, lv7 mpvy 8003402375 return pipe, lv7 mpvy 640 03 1615 1 flexible pipe, lv7 mpvy f 7403300 loe pressure indicator switch, lv stln vf f 8314800 diagnostic lamp, lv7 stln 2520 72 0468319 s a driven disc, lv6mt12 2910 000007 fuel filter insert, lv7 stln vf 2520 72 0306588 disk clutch vehicular
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16854188
Location : dhandhuka , gujarat
Source : GEM Tenders
LIVE TENDER
tender for implement shed roofing sheets , hollow section pipe , hollow section pipe-i , hollow section pipe-ii , white roller , fixing film assembly , lifter drive assembly , transfer cleaning assembly , tray flat cable , wire harness- paper feed rear , wire harness- paper ejection , wire harness- separation unit , wire harness suction , wire harness u- m- rmv , wire harness- m-rmv panel , flat belt- paper ejection , pickup roller for riso ez2300 , clutch unit , stripper pad assembly , master ejection belts , pressure roller , machine denting and painting , labour and full machine service , round galvanized pipe , round galvanized pipe-i , round galvanized pipe-ii , construction of roof shed , jodhpur sandstone door frame or chokhat , wed or wet mix, बीीओ यूशीीषक /boq title, as per attached pdf file
Agency / Dept :
anand agricultural university AAU
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
19.62L
View Documents
T18 Ref No : 16763958
Location : rangareddy , telangana
Source : GEM Tenders
LIVE TENDER
tender for nut cfn0111211 , nut cfn43012191 , bolt cfs0130830 , universal bolt cfs0131225 , screw cfs0131640 , washer spring cfw0111236 , washer spring cfw0111957 , terminal negative cet0402160 , valve drain 125fl91006 , regulator g44024505 , hose 113ec61802 , hose 31z1260497 , lamb guard rear rh 110zz02048 , bolt 104062070 , gas cut 705000002 , bushing 1501511680 , hose assy as0503000ss , cap ccp0200000 , cover 1545414262 , cover 1545414280 , spacer 1503015551 , bolt 1503015561 , nut shoe 1503221331 , screw m6x20 353915 x1 1 , pin 3c0105 , working lamp assy 1d0075 , belt fan 10x550 , ring nut 3c0092 , hood pin 3c0184 , hammer 1e0047 , hand pump seal kit 10x480 , combination plier 1e0004f , filter tool 1e0006 , wheel spnr 24mm 1e0042 , tommy bar 1e0043 , adaptor 3019698x91 , engine mounding bracket 3a0163 , engine mounding bracket 3a0164 , banjo hose 3a0181 , grease nipple 3c0057 , dash board harness 3d0059 , bush 3j0033 , pin cab mtg 3j0075 , tube breather 10x0504 , bucket tooth 3c0050 , bolt 353915x1 1 , nut 353427x1 1, as per bid document, nut cfn0111211, nut cfn43012191, bolt cfs0130830, universal bolt cfs0131225, screw cfs0131640, washer spring cfw0111236, washer spring cfw0111957, terminal negative cet0402160, valve drain 125fl91006, regulator g44024505, hose 113ec61802, hose 31z1260497, lamb guard rear rh 110zz02048, bolt 104062070, gas cut 705000002, bushing 1501511680, hose assy as0503000ss, cap ccp0200000, cover 1545414262, cover 1545414280, spacer 1503015551, bolt 1503015561, nut shoe 1503221331, screw m6x20 353915 x1 1, pin 3c0105, working lamp assy 1d0075, belt fan 10x550, ring nut 3c0092, hood pin 3c0184, hammer 1e0047, hand pump seal kit 10x480, combination plier 1e0004f, filter tool 1e0006, wheel spnr 24mm 1e0042, tommy bar 1e0043, adaptor 3019698x91, engine mounding bracket 3a0163, engine mounding bracket 3a0164, banjo hose 3a0181, grease nipple 3c0057, dash board harness 3d0059, bush 3j0033, pin cab mtg 3j0075, tube breather 10x0504, bucket tooth 3c0050, bolt 353915x1 1, nut 353427x1 1
Agency / Dept :
indian army
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16686698
Location : raghogarh , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for belt,safety,full body harness, detailed sor description at section v scc buyer uploaded atc document , sling,wire rope,3ton,18mmx6m lg, detailed sor description at section v scc buyer uploaded atc document , wire rope sling,10tonx5m,galvanized, detailed sor description at section v scc buyer uploaded atc document , flat webbing sling,polyester,1tonx3m, detailed sor description at section v scc buyer uploaded atc document , sling,flat webbing,polyster,2ton x 5.0m, detailed sor description at section v scc buyer uploaded atc document , flat webbing sling,polyester,5tonx6m, detailed sor description at section v scc buyer uploaded atc document , flat webbing sling,polyester,10tonx5m, detailed sor description at section v scc buyer uploaded atc document , sling,flat webbing,polyster,10ton x 10m, detailed sor description at section v scc buyer uploaded atc document , shackle,d,19mm,3.2ton, detailed sor description at section v scc buyer uploaded atc document , shackle,d,ms,6.3ton, detailed sor description at section v scc buyer uploaded atc document , shackle,d,ms,gr 80,10ton, detailed sor description at section v scc buyer uploaded atc document , gear monorail trolley chain pulley 3 ton, detailed sor description at section v scc buyer uploaded atc document , chain pulley block , capacity 5 mt, detailed sor description at section v scc buyer uploaded atc document , chain pulley block, capacity 1 mt, detailed sor description at section v scc buyer uploaded atc document , jack,hydraulic,20 ton, detailed sor description at section v scc buyer uploaded atc document , jack,hyd,10in stroke ram,10ton, detailed sor description at section v scc buyer uploaded atc document , jack,screw,10 ton.mechanical, detailed sor description at section v scc buyer uploaded atc document , jack,screw,mech,20, detailed sor description at section v scc buyer uploaded atc document , jack,screw,5 ton, detailed sor description at section v scc buyer uploaded atc document , bow shackle with screw pin,15ton, detailed sor description at section v scc buyer uploaded atc document , chain pulley block, 3 ton, 6 m, is 3832, detailed sor description at section v scc buyer uploaded atc document , sling, wire rope, 5 ton x 5 m, detailed sor description at section v scc buyer uploaded atc document , shackle,d,ms,1 to 20ton, detailed sor description at section v scc buyer uploaded atc document , shackle,d,1ton, detailed sor description at section v scc buyer uploaded atc document , hydraulic jack set,127 150 mm,5 ton, detailed sor description at section v scc buyer uploaded atc document , trolley,for 01 ton,chain pulley block, detailed sor description at section v scc buyer uploaded atc document, procurement of lifting tools required for pipeline maintenance, belt,safety,full body harness, detailed sor description at section v scc buyer uploaded atc document, sling,wire rope,3ton,18mmx6m lg, detailed sor description at section v scc buyer uploaded atc document, wire rope sling,10tonx5m,galvanized, detailed sor description at section v scc buyer uploaded atc document, flat webbing sling,polyester,1tonx3m, detailed sor description at section v scc buyer uploaded atc document, sling,flat webbing,polyster,2ton x 5.0m, detailed sor description at section v scc buyer uploaded atc document, flat webbing sling,polyester,5tonx6m, detailed sor description at section v scc buyer uploaded atc document, flat webbing sling,polyester,10tonx5m, detailed sor description at section v scc buyer uploaded atc document, sling,flat webbing,polyster,10ton x 10m, detailed sor description at section v scc buyer uploaded atc document, shackle,d,19mm,3.2ton, detailed sor description at section v scc buyer uploaded atc document, shackle,d,ms,6.3ton, detailed sor description at section v scc buyer uploaded atc document, shackle,d,ms,gr 80,10ton, detailed sor description at section v scc buyer uploaded atc document, gear monorail trolley chain pulley 3 ton, detailed sor description at section v scc buyer uploaded atc document, chain pulley block , capacity 5 mt, detailed sor description at section v scc buyer uploaded atc document, chain pulley block, capacity 1 mt, detailed sor description at section v scc buyer uploaded atc document, jack,hydraulic,20 ton, detailed sor description at section v scc buyer uploaded atc document, jack,hyd,10in stroke ram,10ton, detailed sor description at section v scc buyer uploaded atc document, jack,screw,10 ton.mechanical, detailed sor description at section v scc buyer uploaded atc document, jack,screw,mech,20, detailed sor description at section v scc buyer uploaded atc document, jack,screw,5 ton, detailed sor description at section v scc buyer uploaded atc document, bow shackle with screw pin,15ton, detailed sor description at section v scc buyer uploaded atc document, chain pulley block, 3 ton, 6 m, is 3832, detailed sor description at section v scc buyer uploaded atc document, sling, wire rope, 5 ton x 5 m, detailed sor description at section v scc buyer uploaded atc document, shackle,d,ms,1 to 20ton, detailed sor description at section v scc buyer uploaded atc document, shackle,d,1ton, detailed sor description at section v scc buyer uploaded atc document, hydraulic jack set,127 150 mm,5 ton, detailed sor description at section v scc buyer uploaded atc document, trolley,for 01 ton,chain pulley block, detailed sor description at section v scc buyer uploaded atc document
Agency / Dept :
gail india limited gas authority of india ltd
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Harness Belt. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Harness Belt sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Harness Belt Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Harness Belt, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Harness Belt Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Harness Belt Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Harness Belt.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Harness Belt depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Harness Belt Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Harness Belt bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Harness Belt. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Harness Belt, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Harness Belt, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Harness Belt?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Harness Belt tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Harness Belt?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Harness Belt, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Harness Belt is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All