sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

147Latest Hacksaw frame Tenders List

Latest Hacksaw frame Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Hacksaw frame tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Hacksaw frame tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Hacksaw frame Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Hacksaw frame tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Hacksaw frame Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Hacksaw frame Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Hacksaw frame Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Hacksaw frame tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Hacksaw frame Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Hacksaw frame sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Hacksaw frame tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Hacksaw frame tenders.

Is EMD mandatory for all Hacksaw frame tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Hacksaw frame work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Hacksaw frame tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Hacksaw frame Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16990135
Location : bokajan , assam
Source : GEM Tenders
LIVE TENDER
tender for procurement of hacksaw frame , procurement of oil cane , procurement of bench vice
Agency / Dept :
cement corporation of india limited CCI
Due Date :
Sep 18, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16830825
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
corrigendum tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50 , title51 , title52 , title53 , title54 , title55 , title56 , title57 , title58 , title59 , title60 , title61 , title62, multiple electrical items, switch roma anchor 16 amp, socket roma anchor 16 amp, switch roma anchor 6 amp, socket roma anchor 6 amp, modular box pvc size 8x3 (roma anchor), modular box pvc seat cover 8x3 (roma anchor), modular box pvc size 4x3 (roma anchor), modular box pvc seat cover 4x3 (roma anchor), legrand seat cover pvc 4.5x3 inch legrand, legrand seat cover pvc 3x3 inch, legrand seat cover pvc 9x3 inch, legrand seat cover pvc 6x3 inch, wood screw 1 inch neco steel, wood screw 0.75 inch neco steel, fastener 6 mm, wall mount fan capacitor 1.5 uf bajaj, nylon cable tie 300mm x 4.8mm polymer, double sided tape 1 inch wonder, casing capping pvc 25x16 mm akg, conduit pipe 25 mm akg, cello tape size 2 inch virag, pvc tape steel grip, top plug 16 amp roma anchro, top plug 6 amp roma anchor, ring type led light 18w (6.7 inches), ring type led light 20w (7.8 inches), led light philips 10w (2 ft) philips, 120 watt led light philips, cfl 2 pin 11 watt philips, tube rod 28 watt (4 ft) philips, extension board 4 point strip havells, exhaust fan havells 12 inches with flapper, mcb 2 pole 40 amp havells, mcb 4 pole 63 amp havells, mcb box 2 pole havells, mcb box 4 pole havells, cable 3 core 2.5 mm polycab, cable 3 core 1.5 mm polycab, cable 4 core 4 mm polycab, speaker wire 2 core 1.5 mm polycab, u-clip pvc 6 mm cider, u-clip pvc 9 mm cider, flexible pipe 1 inch pvc akg, taparia combination pliers 210mm model 1621-88, taparia long nose pliers 6 inch/170mm, hacksaw frame mk, hacksaw blade mk, screwdriver set taparia, file flat type 12 inch taparia, file round type 6 inch taparia, neon tester taparia, socket set box 46 pcs (goti set box) bosch, drill bits (2.5, 4, 8, 10 mm) bosch, hammer weight 1 kg taparia, legrand switch 16 amp, pvc bend 25 mm akg, pvc junction box 25 mm akg, ladder 6 feet (6 step) bathla, led light philips 20w (4 ft) philips, clamp meter 1000a. ac digital fluke, multimeter fluke 101 digital fluke, tube rod 14 watt (2ft) (phillips)
Agency / Dept :
all india council for technical education AICTE
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16872213
Location : tawang , arunachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for masonry carpentry and general construction tools - crow bar heavy duty big size , mason trowel 4 inch steel with handle , mason trowel 5 inch steel with handle , mason trowel 6 inch steel with handle , mason trowel 8 inch steel with handle , mason trowel 9 inch steel with handle , plumb bob , transparent water level pipe 10 mm , mortar pan tasla 16 inch , stone breaking hammer 2 kg , mason thread cotton , mason thread nylon , spirit level 12 inch steel body , tape steel 2 metre steel case , tape steel 3 metre steel case , tape steel 15 metre steel case , hammer stone breaking 1 kg , wheel barrow single wheel , spare wheel for wheel barrow cast iron with solid rubber tyre and double ball bearing , dah iron 12 inch with handle , rammer earth 5 kg , earth rammer 14 lbs with wooden handle , folding entrenching shovel military specification , hammer stone dressing 1 kg , felling axe 2 kg without handle , hammer chisel face with handle 6 kg , mason hammer with chisel 850 gram , mason hammer chisel type , cordless rotary hammer drill 18 volt sds plus , electric planer for carpenter nput power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm , hand tool kit for carpenter , carpenter screw driver 18 inch , carborundum stone 6 inch x 2 inch x 1 inch , blade for jack plane 2 inch , carpenter hand drill machine , electric jack planer , electric circular saw 12 inch , electric jack plane , gurmala steel 9 inch to 12 inch , hacksaw frame 12 inch , raker 10 to 12 prong , electric circular saw with spare blade , raker 12 prong with wooden handle , hand operated bitumen sprayer can , sledge hammer 2 kg without handle , sledge hammer 5 kg to 6 kg without handle , stone breaking hammer 6 kg , stone dressing chisel half inch and three fourth inch , steel measuring tape 5 metre fibre case , steel measuring tape 15 metre fibre case , steel measuring tape 30 metre fibre case , hand saw 12 inch , hand saw 20 inch , carpenter chisel 1 inch , carpenter chisel 2 inch , auger eyed half inch , spirit level 8 inch pvc body , spirit level 12 inch pvc body , spirit level 18 inch pvc body , spirit level 24 inch pvc body , spirit level 18 inch steel body , spirit level 24 inch steel body, octagonal crow bar conforming to is 704 latest. material high carbon steel. length 1650 mm. diameter at hammer end 30 mm. nominal weight 11 kg. heat treated and forged. one chisel end and one hammer end. black oxide finish. make equivalent to tata or reputed manufacturer., conforming to is 6013. blade size 4 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 5 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 6 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 8 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 9 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., material forged steel or brass. weight 200/500 gram. precision machined pointed tip. complete with 2 metre nylon thread. corrosion resistant finish. suitable for masonry alignment., transparent flexible pvc water tube. internal diameter 10 mm. wall thickness 2 mm minimum. uv resistant. kink resistant. smooth inner surface. roll length 30 metre minimum., virgin hdpe or pp plastic. diameter 16 inch. capacity 18 to 20 litre. weight 700 gram minimum. heavy duty. unbreakable. crack resistant. smooth non stick inner surface. uv stabilized., head weight 2 kg. forged high carbon steel head. heat treated. face hardness 50 to 55 hrc. handle fiberglass or seasoned hardwood. handle length 800 to 900 mm. anti slip rubber grip. heavy duty construction. manufacturer iso 9001 certified., construction 56 tex x 3 x 3. material 100 percent cotton. linear density 560 gram per 1000 metre minimum. breaking load 78 newton minimum. ball weight 200 gram minimum. uniform twist. high strength. suitable for masonry line marking., material 100 percent nylon multifilament. diameter 1.5 mm minimum. breaking strength 100 newton minimum. ball weight 200 gram minimum. high tensile strength. abrasion resistant. water resistant. suitable for masonry alignment and layout work., non magnetic type. body material heavy duty steel. length 12 inch. accuracy 0.5 mm per metre or better. tube thickness 1.25 mm minimum. liquid ethyl ether or industrial methylated spirit. width 50 mm. height 20 mm. weight 165 gram minimum. warranty 1 year, measuring length 2 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 3 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 15 metre. blade material stainless steel. steel closed case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii., head weight 1 kg. forged high carbon steel head. heat treated. hardness 50 to 55 hrc. double face. fiberglass or hardwood handle. handle length 300 mm to 350 mm. anti slip grip. heavy duty construction., capacity 90 litre minimum. tray material pressed mild steel. tray thickness 1.2 mm minimum. frame heavy duty mild steel tubular construction. wheel diameter 380 mm minimum. pneumatic rubber tyre with steel rim. load capacity 150 kg minimum. powder coated finish., wheel diameter 380 mm minimum. cast iron rim. solid rubber tyre. double ball bearing. axle bore 20 mm. heavy duty construction. suitable for standard wheel barrow., blade length 12 inch. blade material drop forged high carbon steel. blade thickness 4 mm minimum. heat treated. cutting edge hardened. full tang construction. hardwood handle with steel rivets. overall length 450 mm minimum. heavy duty construction, head weight 5 kg. rammer head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. head height 100 mm minimum. hardwood seasoned wooden handle. handle length 1200 mm minimum. heavy duty construction suitable for earth compaction., rammer weight 14 lbs. head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. heat treated. seasoned hardwood handle. handle length 1200 mm minimum. heavy duty construction for compacting soil and aggregates., military specification folding entrenching shovel. three position locking mechanism. blade material high carbon steel. blade hardness 45 to 55 hrc. overall length 580 mm minimum when open. folded length 250 mm maximum. powder coated finish. serrated edge on one side. carry pouch included., head weight 1 kg. forged high carbon steel. heat treated. double face. face hardness 50 to 55 hrc. fiberglass or hardwood handle. handle length 300 mm to 350 mm. heavy duty construction., head weight 2 kg. drop forged high carbon steel. heat treated cutting edge. blade hardness 50 to 55 hrc. cutting edge width 120 mm minimum. eye suitable for standard wooden handle. rust resistant finish., head weight 6 kg. forged high carbon steel. one flat striking face and one chisel face. heat treated. face hardness 50 to 55 hrc. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction., head weight 850 gram. high carbon steel head. one square striking face and one chisel end. heat treated. face hardness 50 to 55 hrc. hardwood or fiberglass handle. handle length 300 mm minimum. heavy duty construction., head weight 600 gram to 800 gram. forged high carbon steel. one flat face and one chisel edge. heat treated. hardwood or fiberglass handle. handle length 300 mm minimum. suitable for brick and stone masonry work., voltage 18 volt dc. chuck type sds plus. battery lithium ion 4 ah minimum. motor type brushless or brushed. impact energy 1.5 joule to 2.6 joule. no load speed 0 to 1400 rpm. impact rate 0 to 4675 bpm. three operating modes rotary drilling hammer drilling and chiselling. maximum drilling capacity concrete 28 mm metal 13 mm wood 30 mm. tool weight 2.3 kg to 3.5 kg including battery. integrated mechanical or electronic safety clutch with anti rotation protection. vibration reduction system. variable speed control. forward and reverse function. led work light. fast charger. minimum two lithium ion batteries of 4 ah each. heavy duty carry case included. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or hilti or equivalent., input power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. heavy duty aluminium base plate with v groove. reversible tungsten carbide blades. dual chip ejection. adjustable depth control. parking shoe. ergonomic soft grip handle with safety lock switch. dust collection facility. accessories to include parallel guide wrench and dust bag. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., professional carpenter hand tool kit comprising essential hand tools. heavy duty carrying case. tools made of chrome vanadium steel or high carbon steel. ergonomic insulated handles. manufacturer iso 9001 certified. make bosch or stanley or taparia or ingco or equivalent., overall length 18 inch. blade material chrome vanadium steel. blade length 300 mm minimum. magnetic tip. hardened and tempered blade. ergonomic anti slip handle. manufacturer iso 9001 certified. make taparia or stanley or bosch or equivalent., size 6 inch x 2 inch x 1 inch. material silicon carbide. double sided coarse and fine grit. suitable for sharpening carpenter tools. heavy duty quality., blade width 2 inch. material high carbon tool steel. hardened and tempered. hardness 58 to 62 hrc. precision ground cutting edge. suitable for standard hand jack plane., manual hand drill with geared drive. chuck capacity 1.5 mm to 10 mm. steel body. hardened steel gears. wooden or polypropylene handle. smooth operation. heavy duty construction., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. tungsten carbide blades. aluminium base plate. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. blade guard. dust extraction port. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. aluminium base plate. tungsten carbide blades. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., material high carbon steel. size 9 inch to 12 inch. hardened and tempered. polished finish. heavy duty construction. suitable for carpenter marking and shaping work. indigenous pattern., frame size 12 inch. heavy duty tubular steel frame. suitable for 300 mm blade. adjustable blade tension. ergonomic handle. powder coated finish. blade included. make taparia or stanley or eclipse or equivalent., heavy duty garden raker. number of prongs 10 to 12. prong material high carbon steel. head width 300 mm to 350 mm. prongs heat treated. handle length 1200 mm to 1500 mm. hardwood handle with firm grip. powder coated finish., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 4000 rpm minimum. cutting depth 100 mm minimum at 90 degree. bevel capacity 0 degree to 45 degree. carbide tipped blade. blade guard. dust extraction port. soft grip handle. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. one extra tungsten carbide tipped blade included. heavy duty carry case. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., number of prongs 12. head material mild steel. head length 12 inch. heat treated prongs. hardwood handle length 1200 mm minimum. powder coated finish. heavy duty construction., capacity 10 litre minimum. material heavy gauge mild steel. hand operated pump. brass spray nozzle. flexible hose 1.5 metre minimum. working pressure 3 bar minimum. leak proof construction. powder coated finish. suitable for spraying bitumen emulsion and primer., conforming to is 841 latest. head weight 2 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., conforming to is 841 latest. head weight 5 kg to 6 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., head weight 6 kg. forged high carbon steel. heat treated. double face. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction, size half inch and three fourth inch. material forged high carbon steel. heat treated. hardness 50 to 55 hrc. overall length 200 mm to 250 mm. hardened cutting edge. suitable for stone dressing and masonry work., measuring length 5 metre. blade material stainless steel. fibre reinforced abs case. blade width 19 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 15 metre. blade material stainless steel. fibre reinforced abs case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 30 metre. blade material stainless steel. fibre reinforced abs case. blade width 13 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., blade length 12 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for wood cutting. make stanley or bahco or taparia or equivalent., blade length 20 inch to 21 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for heavy duty wood cutting. make stanley or bahco or taparia or equivalent., blade width 1 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., blade width 2 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., size half inch. material forged high carbon steel. heat treated. precision ground spiral. eye type. suitable for wood boring. rust resistant finish. make taparia or stanley or equivalent., length 8 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 12 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 24 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent., length 24 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent.
Agency / Dept :
border road organisation BRO
Due Date :
Sep 09, 2026 (9 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16923067
Location : varanasi , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for hacksaw blade , ag cutting wheel , ag grinding wheel , ms electrod , arc welding electrod , cap screw , dowel pins , drill bit , file flat basterd , file handle plastic , grease , hacksaw frame , machine lubricant oil , emery paper, tools, standard, 2.15 mm, 3.15 mm, aws e60 13 3.15 mm, 6x30 mm, 300 mm
Agency / Dept :
department of employment and training DET
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812147
Location : secunderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for try square 10 cm blade , straight scriber 15 cm , hacksaw frame fixed 30 cm , safety goggles , caliper 15 cm hermaphrodite , divider 15 cm spring , screw driver 15 cm , cold chisel flat 12mm , ball pane hammer 450 gm with handle. , ball pane hammer bal 220 gm with handle , half round file 15 cm llnd cut , dot punch 10 cm , file cant saw 15 cm smooth , file round 20 cm 2nd cut , file square 15 cm 2nd cut , feeler gauge 10 blades , file triangular 20 cm 2nd cut , file swiss type needle set of 12 , file half round 25 cm iind cut , file card , stone oil 15 cm x 5 cm x 2point5 cm , oil can 250ml , spanner metric d e set of 10 pieces , interchangeable ratchet socket set 12 mm driver , box spanner 6 25 mm set of 8 with tommy bar , clamp toolmaker 5 cm and 7point5 cm set of 2 , clamp c 5 cm , hand reamer adjustable cover max 9 12 i8mm set of 3 , hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4 , reamer parallel 12 to 16mm set of 5 , scraper flat 15cm , scraper half round 15 cm , chisel cold 9 mm diamond , chisel cold 9 mm cross cut , chisel cold 19mm flat , chisel cold 9 mm round nose , extractor stud ezy out , set combination 30 cm , micrometer 0to25mm out side , micrometer 25to50mm out side with 25 mm test piece , micrometer 50to75mmout side with 50mm test piece , micrometer in side 25to50mm , vernier caliper 20 cm , vernier height gauge 30 cm , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , drill twist taper shank 6mm to 25 mmx1point5 , drill chuck 12mm , wheel dresser 1 for 4 units , machine vice 10cm , sleeve drill morse 0to1 1to2 2to3 , leg vice 10cm jaw , wing compass 25point4cm or 30cm , radius gauges assorted 7 to 15 mm , dial test indicator 0point01 mm , magnetic stand for dti , counter sinking tool , rule steel 30 cm to read metric , rule steel 60 cm , straight edge 45 cm steel , surface plate 45x45 cm cl per granite , marking table 91x91x122 cm , universal scribing block 22 cm , v block pair 7 cm and 15 cm with clamps , square adjustable 15 cm blade , angle plate 10x20 cm , spirit level 15cm metal , portable hand drill electric 0 to 6 mm 550 watt , twist drill straight shank 15 to 12 mm by 1by2 mm , twist drill straight shank 8 mm to 15 mm by 1by2 mm , taps and dies complete set in box b a , taps and dies complete set in box width worth , taps and dies complete set in box 3to18 mm set of 10 , pipe wrench 40cm , pipe wrench 30 cm , pipe vice 100mm , adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm , gauge slip as johnson metric set , carbide wear block 0 lmm 02mm , gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs , gauge plug single ended 05 to 55 by 5mm set of 1 pcs , gauge telescopic up to 150mm , dial vernier caliper 0 to 200mm lc00point05mm universal type , vernier micrometer 0 to 50 mm , depth micrometer 0to 100mm 0point01mm , vernier caliper 150mm lc 0point02mm , comparators stand with dial indicator indicator lc 0point01 mm , engineers try square knife edge 150mm blade , surface roughness comparison plates n1 n12 grade , digital vernier caliper 20cm , digital outside micrometer 0 to 25mm , digital dial test indicator , straight snips 250by300mm , bend snips 250by300mm , swage block , sine bar 125mm , sine bar 250mm , surface roughness tester, raw material for fitter trade nstiv, try square 10 cm blade, straight scriber 15 cm, hacksaw frame fixed 30 cm, safety goggles, caliper 15 cm hermaphrodite, divider 15 cm spring, screw driver 15 cm, cold chisel flat 12mm, ball pane hammer 450 gm with handle., ball pane hammer bal 220 gm with handle, half round file 15 cm llnd cut, dot punch 10 cm, file cant saw 15 cm smooth, file round 20 cm 2nd cut, file square 15 cm 2nd cut, feeler gauge 10 blades, file triangular 20 cm 2nd cut, file swiss type needle set of 12, file half round 25 cm iind cut, file card, stone oil 15 cm x 5 cm x 2point5 cm, oil can 250ml, spanner metric d e set of 10 pieces, interchangeable ratchet socket set 12 mm driver, box spanner 6 25 mm set of 8 with tommy bar, clamp toolmaker 5 cm and 7point5 cm set of 2, clamp c 5 cm, hand reamer adjustable cover max 9 12 i8mm set of 3, hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4, reamer parallel 12 to 16mm set of 5, scraper flat 15cm, scraper half round 15 cm, chisel cold 9 mm diamond, chisel cold 9 mm cross cut, chisel cold 19mm flat, chisel cold 9 mm round nose, extractor stud ezy out, set combination 30 cm, micrometer 0to25mm out side, micrometer 25to50mm out side with 25 mm test piece, micrometer 50to75mmout side with 50mm test piece, micrometer in side 25to50mm, vernier caliper 20 cm, vernier height gauge 30 cm, vernier bevel protractor, screw pitch gauge, wire gauge metric standard, drill twist taper shank 6mm to 25 mmx1point5, drill chuck 12mm, wheel dresser 1 for 4 units, machine vice 10cm, sleeve drill morse 0to1 1to2 2to3, leg vice 10cm jaw, wing compass 25point4cm or 30cm, radius gauges assorted 7 to 15 mm, dial test indicator 0point01 mm, magnetic stand for dti, counter sinking tool, rule steel 30 cm to read metric, rule steel 60 cm, straight edge 45 cm steel, surface plate 45x45 cm cl per granite, marking table 91x91x122 cm, universal scribing block 22 cm, v block pair 7 cm and 15 cm with clamps, square adjustable 15 cm blade, angle plate 10x20 cm, spirit level 15cm metal, portable hand drill electric 0 to 6 mm 550 watt, twist drill straight shank 15 to 12 mm by 1by2 mm, twist drill straight shank 8 mm to 15 mm by 1by2 mm, taps and dies complete set in box b a, taps and dies complete set in box width worth, taps and dies complete set in box 3to18 mm set of 10, pipe wrench 40cm, pipe wrench 30 cm, pipe vice 100mm, adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm, gauge slip as johnson metric set, carbide wear block 0 lmm 02mm, gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs, gauge plug single ended 05 to 55 by 5mm set of 1 pcs, gauge telescopic up to 150mm, dial vernier caliper 0 to 200mm lc00point05mm universal type, vernier micrometer 0 to 50 mm, depth micrometer 0to 100mm 0point01mm, vernier caliper 150mm lc 0point02mm, comparators stand with dial indicator indicator lc 0point01 mm, engineers try square knife edge 150mm blade, surface roughness comparison plates n1 n12 grade, digital vernier caliper 20cm, digital outside micrometer 0 to 25mm, digital dial test indicator, straight snips 250by300mm, bend snips 250by300mm, swage block, sine bar 125mm, sine bar 250mm, surface roughness tester
Agency / Dept :
directorate general of training
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812298
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16812310
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for cut , file flat 300 mm second cut , file flat 200 mm bastard , file flat 300 mm bastard , file swiss type needle set of 12 , file half round 250 mm second cut , file half round 250 mm bastard , file round 250 mm bastard , file hand 150 mm second cut , file card wire brush , oil can 250 ml , plier combination insulated 150 mm , wooden handle forged soldering iron copper bit , blow lamp 500 ml , spanner double ended set of 8 pcs , spanner adjustable 150 mm , interchangeable ratchet socket set with 12 mm driver , double ended tubular box spanner set with tommy bar , glass magnifying 75 mm , clamp tool maker 50 mm , clamp tool maker 75 mm , c-clamp 100 mm , c-clamp 200 mm , reamer hand set pin taper straight flute , reamer machine parallel helical flute , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold 9 mm x150 mm cross cut , chisel cold 9 mm x 150 mm diamond , chisel cold flat 9 mm x 100 mm , chisel cold 9 mm x 100 mm round nose , drill chuck 12 mm with key , pipe wrench 400 mm , pipe vice 100 mm , adjustable pipe die set b.s.p , wheel dresser , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , sleeve drill morse , vice bench 150 mm jaw , bench working 2400 x 1200 x 900 mm , almirah 1800 x 900 x 450 mm , lockers with 12 drawers standard size , metal rack 1820 x 900 x 450 mm , instructor table , instructor chairs , black board with easel , fire extinguisher , fire buckets with stand , vice machine 100 mm jaw , wing compass 300 mm , hammer hand 1 kg. with handle , torque wrench 14 to 68 nm ratchet type , power tools for fastening capacity 10-18mm , different profile gauges plate type for demonstration , knurling tool diamond , knurling tool straight and diagonal , indexable boring bar with inserts , temperature gauge range , dowel pin straight , standard tap screws , lapping plate dia , metric drill gauge , letter drill gauge , number drill gauge , cast iron globe valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flat belt , v- belt and flat belt , washer, clutch, keys, jib, cotter and circlips , hollow punch , bearing different types , lifting sling , bearing extractor , pulley extractor , trammel 300 mm , punch prick , mallet , aviation snip straight cut 300 mm , hammer flat headed with handle , hammer planishing , snip bent left cut 250 mm , stake hatchet with leg , stake grooving , gauge slip metric as johnson set , gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs , gauge plug single ended 5 to 55 by 5 mm set of 11 piece , gauge telescopic 8 to 150 mm , dial test indicator on stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator gauge , engineer try square , surface roughness comparison , vernier bevel protractor , carbide wear block , lathe tools h.s.s. , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type with stand manually , adjustable pipe chain tong to take pipes , spanner adjustable , s.s. and s.c. centre lathe , drilling machine pillar sensitive , drilling machine bench sensitive , d.e. pedestal grinding machine , transformer welding set 300 amps , welding cable , lugs for cable , earth clamps , arc welding table , oxy- acetylene gas welding set , gas welding table with, lab of fitter trade, steel rule 150mm with metric and british graduation, try square 150mm blade, caliper inside 150mm spring, caliper 150mm hermaphrodite spring type, caliper outside 150mm spring, divider spring joint 150mm, scriber 150mm multiple 5mm, punch centre 120mm multiple 10mm, screw driver 150mm multiple 6mm, chisel cold flat 20mm multiple 150mm, hammer ball peen 450 gm, hammer ball peen220 gm, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles plain, punch dot 100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm, stud extractor, combination set 300 mm, micrometer outside 0 to 25 mm, micrometer outside 25 to 50 mm, micrometer outside 50 to 75 mm, micrometer inside with extension rods, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, surface plate 600 multiple 600 mm c.i. granite with stand and cover, marking table 900 multiple 900 multiple 900 mm mild steel, universal scribing block 220 mm, v-block pair 150 multiple 100 multiple 100 mm with clamp, angle plate 150 multiple 150 multiple 250 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 13 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, taps and dies complete set in a box, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, gauge feeler, file triangular 200 mm second cut, file flat 300 mm second cut, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card wire brush, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, blow lamp 500 ml, spanner double ended set of 8 pcs, spanner adjustable 150 mm, interchangeable ratchet socket set with 12 mm driver, double ended tubular box spanner set with tommy bar, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c-clamp 100 mm, c-clamp 200 mm, reamer hand set pin taper straight flute, reamer machine parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b.s.p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, almirah 1800 x 900 x 450 mm, lockers with 12 drawers standard size, metal rack 1820 x 900 x 450 mm, instructor table, instructor chairs, black board with easel, fire extinguisher, fire buckets with stand, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg. with handle, torque wrench 14 to 68 nm ratchet type, power tools for fastening capacity 10-18mm, different profile gauges plate type for demonstration, knurling tool diamond, knurling tool straight and diagonal, indexable boring bar with inserts, temperature gauge range, dowel pin straight, standard tap screws, lapping plate dia, metric drill gauge, letter drill gauge, number drill gauge, cast iron globe valve flanged type, c.i. sluice gate valve flanged type, stop cock, slip-on forged steel flange, pipe threading die with handle, pulleys for v-belt or flat belt, v-belt and flat belt, washer, clutch, keys, jib, cotter and circlips, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel 300 mm, punch prick, mallet, aviation snip straight cut 300 mm, hammer flat headed with handle, hammer planishing, snip bent left cut 250 mm, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs, gauge plug single ended 5 to 55 by 5 mm set of 11 piece, gauge telescopic 8 to 150 mm, dial test indicator on stand, sine bar 125 mm, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator gauge, engineer try square, surface roughness comparison, vernier bevel protractor, carbide wear block, lathe tools h.s.s., lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type with stand manually, adjustable pipe chain tong to take pipes, spanner adjustable, s.s. and s.c. centre lathe, drilling machine pillar sensitive, drilling machine bench sensitive, d.e. pedestal grinding machine, transformer welding set 300 amps, welding cable, lugs for cable, earth clamps, arc welding table, oxy-acetylene gas welding set, gas welding table with positioner, welding torch tips, trolley for gas cylinders, hammer chipping 300g, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16835974
Location : jabalpur , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for flex sensor , temperature sensor , temperature and humidity sensor module , force pressure sensor , colour recognition sensor , water flow sensor , sound sensor , power bank , rfid reader tags , rf modules tx rx 315 mhz ask , stepper motor with driver board , dc motor , servo motors , 150 rpm bo motor , l298p motor driver , servo motor tester , robotics diy kit , drone kit and 3d printer kit and tools , solar panels 6v 100mah , solar panels 12v 10w , copper tape 5mm10mm wide , bo motor wheels , insulating tape , 3d printer flash forge adventure , filament for 3d printer 1000g , cardboard , foam core boards , 20m spool of thick strings various colour , rubber band , popsicle sticks , wood glue 500 ml , hacksaw frame , hacksaw blades , mini hacksaw frame , mini hacksaw blades , pliers 4.5inch size , ball pein hammer , steel shaft claw hammer , cclamp , allen key set , drill machine set , cordless drill machine set , spanner set , removable bench vice , precision screw driver set , wrench , wire strippers , screwdriver , drill bit set , file set , mini file set , flexible cutting mat , pegboard , hot glue gun , soldering kit , adapter with 5v 2a , adapter with 12v2a , soldering helping hand , return measuring tape , stainless steel rule , mechanical digital vernier calliper , spirit level , digital pen electric tester , digital multi meter , syringe 10 ml , syringe 20ml , leveling pipe 8 mm , glue sticks , nuts, bolts and screws , cable tie packs , sand paper , power strip adaptors , bulb holders , electric wires 20 meter , usb to dc jack cable , first aid kit , fire extinguisher handy units , safety goggles , safety gloves pairs , safety mask , pin cushion and pins , sewing box , trimming scissors , seam ripper , pinking shears , sewing and embroidery scissors , thread , needles , crochet needles , wool bundle , colored craft papers , origami papers , art and craft scissor , paper tape masking tape , fevicol bottles , double sided tape , acrylic color , coloring brush , color pallete , jewellary making kit , paper cups , paper straws , cardboard sheets , plastic straws , paper dishes , icecream sticks , crayons ,, ai lab equipment, arduino uno or equivalent, arduino nano or equivalent, arduino mega or equivalent, raspberry pi 3 model, solderless 400 pin breadboard, solderless 800 pin breadboard, selfadhesive proto shield, fr2 a grade material, female berg strip, male berg strip, 16x2 lcd display, iic i2c serial interface adapter module, usb cables, battery, esp32, resistor kit, capacitor kit, linear voltage regulator, water pump module, piezoelectric plate, 8x8 led matrix module, bluetooth module, gsm, gps, laser diode emitter, ldr module, keypad, active buzzer small 5 volt, active buzzer big 5 volt, motor driver module, dc plastic gear motor with wheel, node mcu, wemos d1 r2, vibrating motor, alligator connectors, battery clips with dc jack, hookup wires, jumper cable malemale, jumper cable malefemale, jumper cable femalefemale, rgb leds leds red leds green leds blue leds yellow leds white, timer ic lm 555, diodes and transistors kit, button switch set of 100 pieces, capacitative touch module, capacitative touch switch module, ir sensors, obstacle avoider sensor module, triple axis magnetometer, humidity sensor, mq 2 smoke detection, mq3 alcohol ethanol sensor, mq4 methane natural gas, mq5 methane liquified gas sensor, mq6 liquified petroleum gas sensor, mq7 high sensitivity, mq8 hydrogen gas sensor, mq135 air quality sensor, ir transmitter receiver, ultrasonic sensor module hcsr04 or compatible, triple axis accelerometer, pir motion detector module, pulse rate heart sensor, relay module 5v 10a 2 channel relay module. compatible with arduino, relay module 5v 10a 1 channel relay module. compatible with arduino, big sound microphone module, soil moisture sensor module, touch sensor, metal touch sensor module, rain drop sensor, flex sensor, temperature sensor, temperature and humidity sensor module, force pressure sensor, colour recognition sensor, water flow sensor, sound sensor, power bank, rfid reader tags, rf modules tx rx 315 mhz ask, stepper motor with driver board, dc motor, servo motors, 150 rpm bo motor, l298p motor driver, servo motor tester, robotics diy kit, drone kit and 3d printer kit and tools, solar panels 6v 100mah, solar panels 12v 10w, copper tape 5mm10mm wide, bo motor wheels, insulating tape, 3d printer flash forge adventure, filament for 3d printer 1000g, cardboard, foam core boards, 20m spool of thick strings various colour, rubber band, popsicle sticks, wood glue 500 ml, hacksaw frame, hacksaw blades, mini hacksaw frame, mini hacksaw blades, pliers 4.5inch size, ball pein hammer, steel shaft claw hammer, cclamp, allen key set, drill machine set, cordless drill machine set, spanner set, removable bench vice, precision screw driver set, wrench, wire strippers, screwdriver, drill bit set, file set, mini file set, flexible cutting mat, pegboard, hot glue gun, soldering kit, adapter with 5v 2a, adapter with 12v2a, soldering helping hand, return measuring tape, stainless steel rule, mechanical digital vernier calliper, spirit level, digital pen electric tester, digital multi meter, syringe 10 ml, syringe 20ml, leveling pipe 8 mm, glue sticks, nuts, bolts and screws, cable tie packs, sand paper, power strip adaptors, bulb holders, electric wires 20 meter, usb to dc jack cable, first aid kit, fire extinguisher handy units, safety goggles, safety gloves pairs, safety mask, pin cushion and pins, sewing box, trimming scissors, seam ripper, pinking shears, sewing and embroidery scissors, thread, needles, crochet needles, wool bundle, colored craft papers, origami papers, art and craft scissor, paper tape masking tape, fevicol bottles, double sided tape, acrylic color, coloring brush, color pallete, jewellary making kit, paper cups, paper straws, cardboard sheets, plastic straws, paper dishes, icecream sticks, crayons, water colors, canvas, bamboo skewers, sketch pens
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
4.5L
View Documents
T18 Ref No : 16854181
Location : haldwani , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for fitter trade hand tools and equipment - steel rule with metric british graduation , caliper outside spring type , hammer ball peen with handle , file flat second cut , file half round second cut , hacksaw frame fixed type , safety goggles , straight edge steel , vernier caliper , punch letter set , drill twist straight shank , drill twist taper shank , file feather edge smooth , file triangular smooth , file round second cut , file square second cut , file triangular second cut , file flat second cut safe edge , file flat bastard , file half round bastard , file round bastard , file hand second cut , wire brush , wooden handle forged soldering iron copper bit , hand reamer set taper pin straight flute , machine reamer parallel helical flute , scraper flat , scraper triangular , scraper half round , chisel cold crosscut diamond point , chisel cold flat , chisel cold round nose , drill chuck with key , wheel dresser , lockers with 8 drawers , metal rack , instructor table , instructor chair , black board with easel , torque wrench , power tools for fastening , different profile gauges , knurling tool diamond straight diagonal , indexable boring bar with inserts , temperature gauge , dowel pin straight , standard tap screws , lapping plate , medium carbon heat treated alloy steel metric studs and bolts along with nuts , caps screws , drill gauges , cast iron globe valve , stop cock , slip on forged steel flange , pipe threading die with handle , jigs fixture , pulleys for v belt or flat belt , steel keys , damaged old spur gear , v belt and flat belt , packing gasket , washer clutch keys jib cotter circlip , hollow punch , drill drift , bearing different types , lifting sling , bearing extractor , pulley extractor , mallet , aviation snips straight cut , flat headed hammers with handle , snip bent left cut , slip gauge as johnson metric set , dial vernier caliper , screw thread micrometer , digital micrometer outside , engineers try square , carbide wear block , arm strong type tool bit holder , pipe bender machine , pneumatic trainer kit , carrier for mounting components such as pb relay boxes , cut section model for pneumatic components , hydraulic trainer kit , hydraulic workstation , cut section models for hydraulic components, as per specification
Agency / Dept :
department of personnel and training
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16855118
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
corrigendum tender for measuring steel tape , combination plier insulated , screw driver insulated , electrician screw driver thin stem insulated handle , heavy duty screw driver insulated , electrician screw driver thin stem insulated handle , punch centre , knife double bladed electrician , neon tester , steel rule graduated both in metric and english unit , hammer, cross peen with handle , pipe vice cast iron with hardened jaw open type , hand vice , table vice , hacksaw frame hacksaw frame 300 mm, adjustable , hacksaw frame 150 mm fixed , file flat , file half round , file round , pliers long nose insulated , pliers flat nose insulated , pliers, round nose insulated , d.e. metric spanner double ended , gauge, wire imperial stainlees steel marked in swg and mm , portable electric drill machine , crimping tool 1.5-16 sq. mm , crimping tool 16-95 sq. mm , pliers side cutting , wire stripper adjustable length , hammer, ball peen with handle , scriber knurled centreposition , allen key , scissors blade , torque wrench , pipe cutter to cut pipes , try square , load bank variable , wire cutter and stripper , out side micrometer , tap set , tap set tap set different material , trolley for transportation of batteries , die for threading , die for threading different sizes , rooftop mounting structure , electrical wiring and switch gear rack , protective relays and contactors rack , mccb , elcb and rccb 1 each , multimeter , megger , hydrometer , solar insulation meter , pyranometer , pyrheliometer , lux meter , tong tester or clamp meter , soldering iron 25 watt , soldering iron soldering iron 65 watt , soldering iron soldering iron 120 watt , temperature controlled soldering iron , thermometer digital , sun shine recorder , weather monitoring station , solar cell based sunlight radiation meter , magnetic compass , solar simulator for solar cell characteristic study , iv curve tester , sun path finder , solar energy trainer with grouping of solar cells , solar tracker demonstrator kit , halogen lamp with stand for illumination of solar panels in lab , motorized bench grinder , battery charger , solar charge controller with dusk to dawn automatic switching , solar charge controller with manual switch day lighting , array junction box , solar lantern , solar lantern assembly sets , home light system , solar cell kit , clinometer , spirit level , anemometer , dc table fan , a.c. voltmeter m.i , volt meter , ammeter mc , ammeter mc centre zero , power factor meter , rheostat 0 -1 ohm, 5 amp , rheostat 0 -10 ohm, 5 amp , rheostat 0- 25 ohm, 1 amp , rheostat 0- 300 ohm, 1 amp , digital wattmeter , phase sequence indicator , frequency meter , dc pump , pwm controller , mppt charge controller , inverter with battery , solar pcu , solar grid tied inverter demonstrator kit , solar street light , solar, wind and hybrid power plant , solar traffic light , used water treatment solar plant demonstrator kit , solar dc pump , rubber gloves , gum boots , safety goggles , safety helmet , working bench , wiring board , instructor table , instructor chair , trainee chair , trainee table for two trainee , metal rack , lockers with drawers , almirah , black board white board, lab of solar technician electricial trade items, measuring steel tape, combination plier insulated, screw driver insulated, electrician screw driver thin stem insulated handle, heavy duty screw driver insulated, electrician screw driver thin stem insulated handle, punch centre, knife double bladed electrician, neon tester, steel rule graduated both in metric and english unit, hammer, cross peen with handle, pipe vice cast iron with hardened jaw open type, hand vice, table vice, hacksaw frame hacksaw frame 300 mm, adjustable, hacksaw frame 150 mm fixed, file flat, file half round, file round, pliers long nose insulated, pliers flat nose insulated, pliers, round nose insulated, d.e. metric spanner double ended, gauge, wire imperial stainlees steel marked in swg and mm, portable electric drill machine, crimping tool 1.5-16 sq. mm, crimping tool 16-95 sq. mm, pliers side cutting, wire stripper adjustable length, hammer, ball peen with handle, scriber knurled centreposition, allen key, scissors blade, torque wrench, pipe cutter to cut pipes, try square, load bank variable, wire cutter and stripper, out side micrometer, tap set, tap set tap set different material, trolley for transportation of batteries, die for threading, die for threading different sizes, rooftop mounting structure, electrical wiring and switch gear rack, protective relays and contactors rack, mccb, elcb and rccb 1 each, multimeter, megger, hydrometer, solar insulation meter, pyranometer, pyrheliometer, lux meter, tong tester or clamp meter, soldering iron 25 watt, soldering iron soldering iron 65 watt, soldering iron soldering iron 120 watt, temperature controlled soldering iron, thermometer digital, sun shine recorder, weather monitoring station, solar cell based sunlight radiation meter, magnetic compass, solar simulator for solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells, solar tracker demonstrator kit, halogen lamp with stand for illumination of solar panels in lab, motorized bench grinder, battery charger, solar charge controller with dusk to dawn automatic switching, solar charge controller with manual switch day lighting, array junction box, solar lantern, solar lantern assembly sets, home light system, solar cell kit, clinometer, spirit level, anemometer, dc table fan, a.c. voltmeter m.i, volt meter, ammeter mc, ammeter mc centre zero, power factor meter, rheostat 0 -1 ohm, 5 amp, rheostat 0 -10 ohm, 5 amp, rheostat 0- 25 ohm, 1 amp, rheostat 0- 300 ohm, 1 amp, digital wattmeter, phase sequence indicator, frequency meter, dc pump, pwm controller, mppt charge controller, inverter with battery, solar pcu, solar grid tied inverter demonstrator kit, solar street light, solar, wind and hybrid power plant, solar traffic light, used water treatment solar plant demonstrator kit, solar dc pump, rubber gloves, gum boots, safety goggles, safety helmet, working bench, wiring board, instructor table, instructor chair, trainee chair, trainee table for two trainee, metal rack, lockers with drawers, almirah, black board/white board
Agency / Dept :
department of technical education DTE
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Hacksaw Frame. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Hacksaw Frame sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Hacksaw Frame Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Hacksaw Frame, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Hacksaw Frame Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Hacksaw Frame Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Hacksaw Frame.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Hacksaw Frame depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Hacksaw Frame Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Hacksaw Frame bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Hacksaw Frame. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Hacksaw Frame, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Hacksaw Frame, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Hacksaw Frame?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Hacksaw Frame tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Hacksaw Frame?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Hacksaw Frame, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Hacksaw Frame is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All