sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

156Latest Foundation repair Tenders List

Latest Foundation repair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Foundation repair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Foundation repair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Foundation repair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Foundation repair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Foundation repair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Foundation repair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Foundation repair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Foundation repair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Foundation repair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Foundation repair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Foundation repair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Foundation repair tenders.

Is EMD mandatory for all Foundation repair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Foundation repair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Foundation repair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Foundation repair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17784668
Location : patna , bihar
Source : GEM Tenders
NEW TENDER
tender for surface excavation for cleaning of site not exceeding 30 cm and avg 15cm deep and getting mud out , sand filling under floors or in foundations including watering and consolidation , cement concrete in foundations filling and mass concrete for making surface plain and smooth , rcc nominal mix in foundations including rafts footings foundation beams plinth beams bases for columns etc , brickwork with fly ash bricks straight or curved on plan exc 6m mean radius built , boring holes 3 m deep in soil for under reamed piles and getting out and disposal of spoil to a distance of n exc 50 m 300mm dia , reinforced cement concrete nominal mix in columns pillars piers posts and struts , rendering 12mm thick on fair faces of brick work or concrete surfaces , finishing walls with acrylic smooth exterior paint of required shade , framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes , surfaces of any description over 10cm in width or girth not otherwise described , shingle or gravel spread rolled and consolidated to gradient and camber required 50mm thick, repair and maintenance of bus stand, surface excavation for cleaning of site not exceeding 30 cm and avg 15cm deep and getting mud out, sand filling under floors or in foundations including watering and consolidation, cement concrete in foundations filling and mass concrete for making surface plain and smooth, rcc nominal mix in foundations including rafts footings foundation beams plinth beams bases for columns etc, brickwork with fly ash bricks straight or curved on plan exc 6m mean radius built, boring holes 3 m deep in soil for under reamed piles and getting out and disposal of spoil to a distance of n exc 50 m 300mm dia, reinforced cement concrete nominal mix in columns pillars piers posts and struts, rendering 12mm thick on fair faces of brick work or concrete surfaces, finishing walls with acrylic smooth exterior paint of required shade, framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes, surfaces of any description over 10cm in width or girth not otherwise described, shingle or gravel spread rolled and consolidated to gradient and camber required 50mm thick
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Nov 04, 2026 (20 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17793334
Location : chandigarh , chandigarh
NEW TENDER
corrigendum tender for maintenance of e.i. in non residential building at u.t chandigarh. (repair/replacement of existing defunct parts and annual maintenance contract of 2 nos. lift of mitsubishi make installed in infosys foundation red cross sarai at pgimer campus, secto
Agency / Dept :
chandigarh administration engineering department
Due Date :
Oct 21, 2026 (6 days left)
Tender Value :
61.67K
View Documents
T18 Ref No : 17767681
Location : kamareddy , telangana
LIVE TENDER
tender for supply of vacuum motor, construction of basement foundation and repair and rewinding of 25 hp submersible motor pumpset at gadi water sump in kamareddy municipality under general fund, supply of vaccum motor
Agency / Dept :
municipal corporation
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
1.29L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17673207
Location : ernakulam , kerala
LIVE TENDER
tender for miscellaneous civil repair works for condenser foundation at ernakulam dairy
Agency / Dept :
kerala cooperative milk marketing federation ltd KCMMF
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
9L
View Documents
T18 Ref No : 17740227
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for repair and overhauling service - diesel generators- dg sets (dfm); repair and refurbishment of governor foundation; no; buyer premises
Agency / Dept :
indian navy
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17641905
Location : ranchi , jharkhand
LIVE TENDER
tender for (i) ranchi-tori section: strengthening of foundation and substructure of br no 127 (5x12.2 m psc), repairing of wing wall, bridge protection works & construction of curtain wall and drop wall with other allied works between lohardaga (lad) and barkichampi (bici). (ii) preparation of completion drawing of ongoing and completed bridge works (18 bridges) under the jurisdiction of special repair den(south)/rnc. (2nd call)
Agency / Dept :
south eastern railway SER
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
1.6Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17613420
Location : jabalpur , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for boq item no. 1 , boq item no. 2.1 , boq item no. 2.2 , boq item no. 2.3 , boq item no. 2.4 , boq item no. 2.5 , boq item no. 2.6 , boq item no. 2.7 , boq item no. 3 , boq item no. 4 , boq item no. 5 , boq item no. 6 , boq item no. 7 , boq item no. 8 , boq item no. 9 , boq item no. 10 , boq item no. 11 , boq item no. 12 , boq item no. 13 , boq item no. 14 , boq item no. 15 , boq item no. 16 , boq item no. 17 , boq item no. 18 , boq item no. 19 , boq item no. 20 , boq item no. 21 , boq item no. 22 , boq item no. 23 , boq item no. 24 , boq item no. 25 , boq item no. 26 , boq item no. 27 , boq item no. 28 , boq item no. 29 , boq item no. 30 , boq item no. 31 , boq item no. 32 , boq item no. 33 , boq item no. 34 , boq item no. 35 , boq item no. 36 , boq item no. 37 , boq item no. 38 , boq item no. 39 , boq item no. 40 , boq item no. 41 , boq item no. 42 , boq item no. 43 , boq item no. 44 , boq item no. 45 , boq item no. 46 , boq item no. 47 , boq item no. 48 , boq item no. 49 , boq item no. 50, boq consisting of 1 to 50 for amc of glf system at jabalpur airport, operation & maintenance of all electrical installations of glf system in operational area and ccr hall, perimeter lighting, dvor, localizer, glide path, old power house, cisf barracks etc. as per the list of installations available in tender documents appendix-a by deploying adequate man power as mentioned in additional terms & conditions of contract complete as per terms & conditons of contract etc. as required. highly skilled-1 skilled-10 un-skilled-11, supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required. main control card., supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required. power supply plus driver card, supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required.ttm card (set of 02 cards ), supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required.output pt 4000v / 10 volts., supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required.thyristor 250 rk 160, supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required.ti - 300 fuse, supply of spare pcb cards for 30/15/10/7.5/5/4/2.5 kw, 6.6 amp, microprocessor type ccr (nasu make) complete etc. as required.tr - 7 transformer primary 415, service/emergency visit by service engineer for repairing/rectification including calibration of all 30 kw to 2.5 kw mpccr within 48 hours of intimation of complaint and rectification of the fault as when required.(spare will be provided by aai)(the inventory of the ccrs as mentioned at page no. appendix-a of scc), annual maintenance contract of alcms & related systems including trouble shooting, repairing of control cards servicing of alcms system by repair or replacement of defective components & hardware such as touch screen, plcs, desktop pc, vault processor, associated components, providing software programming / re-programming support for rectification, carrying out routine / preventive maintenance during visit on half yearly/ emergency visit basis & providing full support & telephonic guidance during breakdown etc. for rectification as & when required to keep the system in acceptable functional and serviceable condition as per terms & conditions of contract . (this work should be carried out through oem.all hardware components required for servicing of alcms will be in scope of aai).(for 1st year), annual maintenance contract of alcms & related systems including trouble shooting, repairing of control cards, servicing of alcms system by repair or replacement of defective components & hardware such as touch screen, plcs, desktop pc, vault processor, associated components, providing software programming / re-programming support for rectification, carrying out routine / preventive maintenance during on half yearly/ emergency visit basis & providing full support & telephonic guidance during breakdown etc. for rectification as & when required to keep the system in acceptable functional and serviceable condition as per terms & conditions of contract . (this work should be carried out through oem. all hardware components required for servicing of alcms will be in scope of aai).(for 2nd year), supply of male ,female connector suitable form 2.5 sqmm secondary lead for extended runway fitting complete as per site requirement., supply of 5 kv grade plug and receptacle of type i class b connector suitable for field attachment with 5 kv grade pvc insulated pvc sheathed single core screened copper conductor cable of following size conforming to the relevant is / technical specifications etc. complete as required. (1 x 6 sqmm), supply of 150 w, 6.6 amps bi-pin halogen lamps suitable for ama make elevated runway light fixtures etc. as required., supply of bi-pin holder for 200/ 150/45 w halogen lamp suitable for ama make elevated runway light fixtures etc. as required., supply of converter for glf signages that can be operated from both circuits a & b along with provision of auto changeover from one circuit to another and suitable for existing signages installed at site etc. complete as required., supply of faa and icao compliant blue led module suitable for ama make medium intensity elevated omni directional taxi way edge light fixture, 6.6 amps with driver with all accessories etc. complete as required., supply of 200 w, 6.6a, single ended bi-pin halogen lamp suitable for use in ama make airfield lighting fittings (similar to osram make cat. no. 64386 or philips/narva make cat. no. 58373) etc. complete as required., supply of 105w, 6.6a, prefocus dichroic coated reflector lamp suitable for use in adb safegate make inset airfield lighting fixtures (similar to osram make cat. no. 64339a or philips/narva make cat. no. 58308) etc. complete as required., supply of terminal block assembly with fixing hardware (part ref, e1) suitable for adb safegate make inset light fixtures etc. complete as required., supply of mirror finish aluminium reflector suitable for ama make papi unit installed at site to meet icao/car specifications complete with all accessories etc. as required., supply of mirror finish aluminium reflector suitable for ama make elevated approach / threshold / end light fixtures installed at site to meet icao/car specifications complete with all accessories etc. as required., supply of green spreader lens / refractor front glass suitable for ama make apn type runway threshold light fixtures installed at site to meet icao/car specifications complete with all accessories etc. as required., supply of red spreader lens / refractor front glass suitable for ama make apn type runway end light fixtures installed at site to meet icao/car specifications complete with all accessories etc. as required., supply of clear spreader lens / refractor front glass suitable for ama make apn type approach light fixtures installed at site to meet icao/car specifications complete with all accessories etc. as required., supply of quick connect plug connector (m) kit for ocem sequence flashing light ffu / lefl lights complete with all accessories etc. as required., supply of ht tape roll having size 25 mm (w) x 9 m (l) etc. as required., rewinding, repairing and overhauling of following types of fans by using suitable gauge enamel copper wire, replacement of bearing (if required), baking, oiling, greasing, assembling, testing, to & fro transportation etc. as required. i/c less for dismantle wire. ceiling fan of all sizes, rewinding, repairing and overhauling of following types of fans by using suitable gauge enamel copper wire, replacement of bearing (if required), baking, oiling, greasing, assembling, testing, to & fro transportation etc. as required. i/c less for dismantle wire. exhaust fan up to 450 mm dia, dehydration and filtration of transformer oil at site by bringing the dehydration/ filtration machine at airport including testing oil for bdv and acidity before and after dehydration and filtration, submission of test report as required for 02 nos 500 kva, 33/0.433 kv transformers etc. complete job as required.the agency shall ensure that the test report after dehydration is in accordance with the relevant standards and statutory requirement (for 1st year), dehydration and filtration of transformer oil at site by bringing the dehydration/ filtration machine at airport including testing oil for bdv and acidity before and after dehydration and filtration, submission of test report as required for 02 nos 500 kva, 33/0.433 kv transformers etc. complete job as required.the agency shall ensure that the test report after dehydration is in accordance with the relevant standards and statutory requirement (for 2nd year), supply and top-up of new transformer oil compliant with is, 335,1993 in 500 kva, 33/0.433 kv rating transformer including submission of test certificate etc. complete as required., testing and calibration of gec alstom make idmt relays of type cdg-31 installed in ht/lt panel (02 oc +01 ef relay) with relay testing kit at airport site and submitting the test reports complete etc. as required. (for 1st year), testing and calibration of gec alstom make idmt relays of type cdg-31 installed in ht/lt panel (02 oc +01 ef relay) with relay testing kit at airport site and submitting the test reports complete etc. as required. (for 2nd year), overhauling, servicing & testing of l&t make acbs having capacity 800 a by oem or their authorized service dealer as per manufacturers reccomendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required. (for 1st year), overhauling, servicing & testing of l&t make acbs having capacity 800 a by oem or their authorized service dealer as per manufacturers reccomendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required. (for 2nd year), overhauling, servicing & testing of abb make 33 kv ht panel & vcb of rating 1250 a i/c testing & calibration of ref 615 & other auxiliary relays as per manufacturers recommendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required (for 1st year)., overhauling, servicing & testing of abb make 33 kv ht panel & vcb of rating 1250 a i/c testing & calibration of ref 615 & other auxiliary relays as per manufacturers recommendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required (for 2nd year)., rewinding of 3 hp submersible pump motor with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. credit towards dismantled copper winding to be considered while quoting the rates., rewinding of 5 hp pump motor sets (submersible/ mono block) with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. credit towards dismantled copper winding to be considered while quoting the rates., rewinding of 7.5 hp pump motor sets (submersible) with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. credit towards dismantled copper winding to be considered while quoting the rates., rewinding of 15 hp pump motor sets (mono block ) with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. credit towards dismantled copper winding to be considered while quoting the rates., lifting & lowering of submersible pump sets (up to 10 hp) from / in borewell (depth 400 to 450 feet) etc. complete as required., decorative lighting arrangement by approx. 250 nos series fairy led lights (each length approx. 10 to 12 mtr) & 100 nos. led par light (pleasant & colourful) on occasion of national festival, aai foundation day etc. on /near terminal building, atc tower building including transportation to & from site, installation, wiring, connections from nearest power source by aai etc. complete to the satisfaction of eic as required. (for 1st year)., decorative lighting arrangement by approx. 250 nos series fairy led lights (each length approx. 10 to 12 mtr) & 100 nos. led par light (pleasant & colourful) on occasion of national festival, aai foundation day etc.on /near terminal building, atc tower building including transportation to & from site, installation, wiring, connections from nearest power source by aai etc. complete to the satisfaction of eic as required. (for 2nd year)., painting of 7 metre height street light poles with 2 coats of aluminium paint including removal of rust, flakes etc. complete as required., carring out / making in-field measurement of intensity, beam spread, orientation, chromaticity, luminous factor, one time field alignment setting for inset/elevated type runway edge, elevated runway end, inset/elevated type threshold, inset/elevated type approach, papi airfield ground lights & mandatory / information signboards by using vehicle mounted mobile testing equipment system / frame reader, submission of colour print copy of duly certified test reports etc. as per requirement of icao/civil aviation requirement (car) section-4 aerodrome standard and technical specification etc. complete as required. during testing, replacement of lamps, filters, and lenses, wherever required, shall be carried out immediately. the final compliance report, confirming compliance with the applicable statutory requirements, shall be submitted. the scope of work shall also include cleaning and replacement of the lenses and filter and of the fittings the required spare parts shall be provided by aai. (for detail inventory of airfield ground lighting (agl) fixtures refer annexure a given at atc of the tender document) (for 1st year), carring out / making in-field measurement of intensity, beam spread, orientation, chromaticity, luminous factor, one time field alignment setting for inset/elevated type runway edge, elevated runway end, inset/elevated type threshold, inset/elevated type approach, papi airfield ground lights & mandatory / information signboards by using vehicle mounted mobile testing equipment system / frame reader, submission of colour print copy of duly certified test reports etc. as per requirement of icao/civil aviation requirement (car) section-4 aerodrome standard and technical specification etc. complete as required.during testing, replacement of lamps, filters, and lenses, wherever required, shall be carried out immediately. the final compliance report, confirming compliance with the applicable statutory requirements, shall be submitted. the scope of work shall also include cleaning and replacement of the lenses and filter and of the fittings the required spare parts shall be provided by aai. (for detail inventory of airfield ground lighting (agl) fixtures refer annexure a given at atc of the tender document) (for 2nd year), providing the following type/class of vehicle without driver & with fuel on 24 hrs basis on all days i/c holidays, saturday & sunday, for repair and maintenance works at jabalpur airport as per terms and conditions of contract for limits of usage as given below, the rate shall include provision of (non-airconditioned) vehicle with commercial registration as per agreement conditions, obtaining/renewing fitness certificate, puc, insurance policy, registration certificate as per motor vehicles act, rto or other applicable laws/regulations as applicable, all consumables and servicing and other requirements as per terms & conditions of contract. the vehicle shall be driven by maintenance staff with deployed against this contract.type of vehicle , muv - tata ace/mahindra supro or equivalent with covered cargo box. / quantity , 01 vehicle / usage , 750 kms per month., re-calibration of ama make clinometer including to and fro charges from jabalpur to ahmadabad for day to day calibration of papi etc complete as required.(for 1st year), re-calibration of ama make clinometer including to and fro charges from jabalpur to ahmadabad for day to day calibration of papi etc complete as required.(for 2nd year), emergency visit by service engineer for ground calibration of papi unit excluding civil works, including dismantling & reinstallation of the same to meet required angle as per satisfaction of pilot/airlines through oem by deploying technician as required., supply of wind shock cloth for wind direction indication with following specifications. colour- orange and white. or black and white diameter of broader end-0.9mm diameter for narrow end -0.45mm length-3.6m, cable fault finding services for underground cables using fault locating machine in ht/lt cables (33 kv/11 kv/1.1kv) of all sizes including transportation of machine to site, any numbers of fault location at site per length etc. complete as per site requirement., emergency visit by service engineer for repairing/rectification of 20 kva 3 phase air-cooled servo controlled voltage stabilizer (model no., air cooled, rating, scvs 20kva 3ph ac(340-480/415)v d2) having input operating voltage range from 340v-480v and complete with all accessories as per technical specifications as required., to carry out the complete items of works of cpwd schedule of rates (electrical) dsr-2025 as per cpwd specifications as required for an amount of rs. 100000/- (for quoting please refer instructions given at atc clause - 40.2 of tender document).the rate shall be quoted for this item as per examples given below, (i) if bidder wants to quote the rates at par with rates of dsr-2025 (e & m), then bidder has to quote 1.00 in the rate column.(ii) if bidder wants to quote the rate 10 percent above on rate of dsr-2025 (e & m), then bidder has to quote 1.10 in the rate column.(iii) if bidder wants to quote the rate 10 percent below on rate of dsr-2025 (e & m), then bidder has to quote 0.90 in the rate column.
Agency / Dept :
airports authority of india AAI
Due Date :
Oct 26, 2026 (11 days left)
Tender Value :
2.42Cr
View Documents
T18 Ref No : 17738655
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
corrigendum tender for dismantling of 5 hp motor gear box and fabricated cantrol , material and labour for making , material and labour for disconnecting and removing , supply only bearings suitable for 5 hp , material and labour for servicing of gear box , supply and fixing in replacement of power ac contractor , supply and fixing in replacement of variable , supply and fixing in replacement of heavy duty , supply and fixing in replacement chain , material and labour for maintenance servicing , supply and fixing in replacement three phase , supply laying testing and commissioning , supply and laying of dwc pipe isi marked , supply and fixing 10 mm dia steel string , material and labour pcc , excavation in trenches not exc , returning filling in including spreading , removing excavated soil, repair and replacement of hp motor gear box and fabricated control panel, dismantling of 5 hp motor gear box and fabricated cantrol panel from site complete., material and labour for making 100 percentage serviceable to the lt panel motorized gate control panel by tracing out defects and replacing unsv parts including control wiring complete. parts such as relay vsp 2 mcb nuts bolts washers thimbles etc shall be deemed to be included in the quoted rate., material and labour for disconnecting and removing the squirrel cage 3 phase 415 volts 50 hz induction motor of 5 hp capacity from its foundations by disconnecting electrical connections and motor couplers taking it to workshop for repair and dismantling and opening up of motor removing burnt out winding wires complete cleaning startor and rotor assembly rewinding the startor with same guage and type with insulation copper conductor winding wires and insulation sheets applying insulating varnish over the complete winding drying up by heating assembling back the stator and rotor including replacement of terminal blocks and terminal bolts nuts and washers refixing back to its postion after getting repaired and making all connections carry out alignment testing for satisfactory function all as specified, supply only bearings suitable for 5 hp., material and labour for servicing of gear box with oil suitable for three phase motor 5 hp 1450 rpm installed at 130 hu hanger motorized gate including drainout the lubricating oil and proper cleaning refilling gear box oil and creasing of chain size 25mm and connecting gear to motor complete., supply and fixing in replacement of power ac contractor 40 amp three pole mnx a2 complete, supply and fixing in replacement of variable freaquency transformer vft suitable for 5 hp electric motor 3 phase 50 hz 375 to 440 volts 1440 rpm complete, supply and fixing in replacement of heavy duty round pully with bearing suitable for hanger door wheel 5 ton capacity complete, supply and fixing in replacement chain 25mm suitable for connecting gear to motor complete, material and labour for maintenance servicing of induction motor 5 hp capacity by means greasing oiling replacement of gland of suitable size replacement of coupling flange and replacement of nuts bolts etc as directed at site., supply and fixing in replacement three phase 6 sqmm copper pvc insulated flexible type cable complete, supply laying testing and commissioning ug cable xlpe insulated screened pvc bedded galvanized steel strip or wire armoured electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sq mm 4 core with suitable thimbles complete including disconnecting and taking out old existing unserviceable cable all as specified, supply and laying of dwc pipe isi marked is 16205 part-ii of outer dia of 63 mm and inner dia 50mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories complete including disconnecting and taking out old existing unsv pipe all as specified and directed., supply and fixing 10 mm dia steel string for working on rooling wheel for moving to steel gate. the steel string shall be bearing capacity minimum 5 ton complete, material and labour pcc 1 ratio 3 ratio 6 type c1 using 20 mm graded stone aggregate for platform of motor and water storage tank size 2.5 x 5 x 0.3m etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete., excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft loose soil complete, returning filling in including spreading leveling watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete, removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete
Agency / Dept :
indian army
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17520397
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , s and fixing internal hydrant valve , supply and fixing of external yard hydrant valve , sfc of butterfly valve , s and fixing of orifice plate , pitc non return valve , pitc of stainless steel y strainer , s and fixing of 15 m hose pipe , s and fixing first aid hose reel , s and fixing 63 mm dia gun metal short branch pipe , s and fixing of fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , installation control valve of cast iron body , s and f of hose cabinet , cutting holes , supply of cable , laying of cable , s and m end termination , s and f fire cable , cable tray , g i plate earthing , p and f gi strip , gi strip for looping , p and f gi earth wire , p and f gi pipe, supply installation testing and commissioning of firefighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of die sel engine driven main fire pump conforming to is 12469 019 suitable for automatic operation and consisting of following, complete in all respects, as required diesel driven pump b horizontal pe, stage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe xtended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential ilencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as quired. e suitable cement concrete foundation duly plastered and with anti vibration pads. note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head., jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads. note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects, as required terrace pump. b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head., control panels fabrication supply installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required. incoming 250a, 50ka 4 pole mccb, ic equal to 100 percent icu rating digital voltmeter 0 500v with selector switch digital ammeter 0 250 a with selector swtich and cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 300a. outgoing note all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps main fire pump 125 a, 50katpn mccb, ics is equal to 100 percent icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. jockey pump jockey pump 63 a, 50ka tpn mccb, icsis equal to 100 percent icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, note may please be see at atc of special repair no. 5, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories. providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc. conforming to is 636 type a as required. gun metal, supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. gun meta, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 4 way 150 mm dia m.s. pipe, providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia, supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750x mm x 600 mm x 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15x15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
59.95L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17720099
Location : fatehpur - up , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for boq bid list - modular socket 16 amp , modular socket 6 amp , modular switch 16 amp , modular switch 6 amp , mop ponch with handle , ms rod 30mm and 40 mm , ms sq rod 1-2 x 1-2 , multistand copper wire 4 sqmm red , multistand copper wire 4 sqmm black , multistand copper wire -75 sqmm , multistand copper wire 1 sqmm , multistand copper wire 1- 5 sqmm , multistand copper wire 2-5 sqmm red , multistand copper wire 2-5 sqmm black , multistand copper wire 6 sqmm red , multistand copper wire 6 sqmm black , nail paint multiple colours , non moduler fan regulator , non moduler socket 16 amp , non moduler socket 6 amp , non moduler switch 16 amp one-way , non moduler switch 6 amp one-way , non moduler switch 6 amp two-way , non moduler two way switch 16 amp , oil filter mahindra bolero power bs-iv 2018 model , old dhoti , oxygen hose pipe hi quality , paint black blue red red oxide white yellow , painting brush set of 12 pcs pack , pen drive 128 gb , pendant- batten holder , phenyl 5 ltr pack black and white , plug top 16 amp , plug top 6 amp , poster color , powder talcom , primer for skin , pvc bends 25 mm and tees 25 mm , pvc casing capping 25mm , pvc clip diff type 6 mm- 8 mm-10 mm-12 mm- 15mm - 20 mm , pvc conduit pipe 25 mm , pvc flexible conduit 25 mm , pvc gang box non modular 7x4 , pvc gulli heavy duty , pvc junction box 25 mm , pvc tape , rivets different sizes , rose water , sand paper , scrub for skin , soft broom , solder wire , soldering paste , stapler pin 10 no , screws 1 inch -2 inch-1-5 inch , thread 40 no , toner epson l6270 ink 001 set c m y bk set , toner konica minolta bizhub 185en ink c m y set , towel big , towel small , turpentine oil , wax , wax strip , welding electrode 2-5 mm , welding electrode 3-15 mm , welding electrode 4-0 mm , white board marker , white board duster magnetic , writing brush set 0-12 no set , padistal grinder wheel 6 inch , nut bolt with washer for bench vice 4 inch , duster cloth set of 6 pcs pack , acid toilet cleaner , coconut broom big stick , dustbin 35 ltr , dustbin 10 ltr padistal type , plastic bucket 10 ltr , plastic mug , plastic water jug 2 ltr , toilet cleaner 500 ml , nepthalene ball 200 gm pack , room freshener , electric call bell , ceilling fan , metal water tap , teflon tape , garden pipe 1 inch , cpvc pipe 1-2 inch , cpvc socket and elbow , cpvc union 1-2 inch , cpvc ball valve 1-2 inch , pvc waste pipe , waste jali for basin , cpvc solvent 200 gm , curtain pipe with wall to wall , comprehensive repair and maintenance of 2 ton split ac , comprehensive repair and maintenance of water cooler, photocopy paper a-4 size paper, external hard disk 1 tb, white board 6x4, cmos battery, cat 6 cable, ball pen blue, eraser set of 10 pcs pack, file cover, file tag, pencil set of 10 pcs pack diff type, paper t pin, plastic folder transparent, permanent marker pen, toner cartridge hcc388, short hand note book, antivirus 1 user software, m s sheet 3 mm 6x4, copper wire twin core 23-76, acetylene hose pipe hi quality, ag4 cutting wheel hi speed 4 inch, ag4 grinder wheel 4 inch, air compressor pipe, air filter mahindra bolero power bs-iv 2018 model, aluminium 2 core cable 06 sqmm, battery 12v 150ah, battery 9 watt, body lotion, skin massage cream, brown paper, bulb 100, ceiling rose, cleansing milk, cnc machine battery 6v panasonic 6v, concealer, cotton roll 500 gm, crocodile clip, detergent powder, drawing sheet, drill bit 4 6 8 10mm, emery paper, emery paper roll, enamelled copper winding wire 34 swg and 36 swg, engine oil 15w-40, eyebrow pencil, face bleach, face pack, facial kit, fan capacitor diff type 2.5 -3.15- 3-50- 4, fastner 6- 8- 10 -12mm, face foundation, fuel filter mahindra bolero power bs-iv 2018 model, grease, hair colour, hair shampoo, hand soap, hand wash 200 ml, hacksaw blade, highlighter for skin, juda pin and decorative pin, kajal, led bulb 15 watt, toner epson ink 003 black, led bulb 18 watt, led bulb 23 watt, led bulb 9 watt, led tube light 18 watt, led tube light 36 watt, lipstick, m s flat 100x10 mm, m s flat 50 x 10 mm, m s flat 65 x 10 mm, m s flat 75 x 10 mm, m s flat 50x 05 mm, m s pipe 3 mm 50 mm, makeup brush set, makeup kit, mascara, mcb 16 amp 2 pole - 32 amp 2 pole, mcb 6 amp ,10 amp -16 amp, 32 amp 1 pole, mobil oil, modular board 2 way-3 way-4 way-6 way-8 way, modular regulator, modular socket 16 amp, modular socket 6 amp, modular switch 16 amp, modular switch 6 amp, mop ponch with handle, ms rod 30mm and 40 mm, ms sq rod 1-2 x 1-2, multistand copper wire 4 sqmm red, multistand copper wire 4 sqmm black, multistand copper wire -75 sqmm, multistand copper wire 1 sqmm, multistand copper wire 1-5 sqmm, multistand copper wire 2-5 sqmm red, multistand copper wire 2-5 sqmm black, multistand copper wire 6 sqmm red, multistand copper wire 6 sqmm black, nail paint multiple colours, non moduler fan regulator, non moduler socket 16 amp, non moduler socket 6 amp, non moduler switch 16 amp one-way, non moduler switch 6 amp one-way, non moduler switch 6 amp two-way, non moduler two way switch 16 amp, oil filter mahindra bolero power bs-iv 2018 model, old dhoti, oxygen hose pipe hi quality, paint black blue red red oxide white yellow, painting brush set of 12 pcs pack, pen drive 128 gb, pendant- batten holder, phenyl 5 ltr pack black and white, plug top 16 amp, plug top 6 amp, poster color, powder talcom, primer for skin, pvc bends 25 mm and tees 25 mm, pvc casing capping 25mm, pvc clip diff type 6 mm-8 mm-10 mm-12 mm- 15mm - 20 mm, pvc conduit pipe 25 mm, pvc flexible conduit 25 mm, pvc gang box non modular 7x4, pvc gulli(heavy duty, pvc junction box 25 mm, pvc tape, rivets different sizes, rose water, sand paper, scrub for skin, soft broom, solder wire, soldering paste, stapler pin 10 no, screws 1 inch -2 inch-1-5 inch, thread 40 no, toner epson l6270 ink 001 set c m y bk set, toner konica minolta bizhub 185en ink c m y set, towel big, towel small, turpentine oil, wax, wax strip, welding electrode 2-5 mm, welding electrode 3-15 mm, welding electrode 4-0 mm, white board marker, white board duster magnetic, writing brush set 0-12 no set, padistal grinder wheel 6 inch, nut bolt with washer for bench vice 4 inch, duster cloth set of 6 pcs pack, acid toilet cleaner, coconut broom big stick, dustbin 35 ltr, dustbin 10 ltr padistal type, plastic bucket 10 ltr, plastic mug, plastic water jug 2 ltr, toilet cleaner 500 ml, nepthalene ball 200 gm pack, room freshener, electric call bell, ceilling fan, metal water tap, teflon tape, garden pipe 1 inch, cpvc pipe 1-2 inch, cpvc socket and elbow, cpvc union 1-2 inch, cpvc ball valve 1-2 inch, pvc waste pipe, waste jali for basin, cpvc solvent 200 gm, curtain pipe with wall to wall, comprehensive repair and maintenance of 2 ton split ac, comprehensive repair and maintenance of water cooler
Agency / Dept :
department of employment and training DET
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Foundation Repair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Foundation Repair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Foundation Repair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Foundation Repair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Foundation Repair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Foundation Repair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Foundation Repair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Foundation Repair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Foundation Repair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Foundation Repair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Foundation Repair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Foundation Repair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Foundation Repair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Foundation Repair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Foundation Repair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Foundation Repair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Foundation Repair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Foundation Repair is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All