sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

44Latest Fabrication of chute Tenders List

Latest Fabrication of chute Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Fabrication of chute tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Fabrication of chute tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Fabrication of chute Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Fabrication of chute tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Fabrication of chute Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Fabrication of chute Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Fabrication of chute Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Fabrication of chute tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Fabrication of chute Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Fabrication of chute sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Fabrication of chute tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Fabrication of chute tenders.

Is EMD mandatory for all Fabrication of chute tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Fabrication of chute work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Fabrication of chute tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Fabrication of chute Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17017176
Location : najibabad , uttar pradesh
Source : GEM Tenders
NEW TENDER
tender for mill fabrication work 1 , mill fabrication work 2 , mill fabrication work 3 , mill fabrication work 4 , mill fabrication work 5 , mill fabrication work 6 , mill fabrication work 7 , mill fabrication work 8 , mill fabrication work 9 , mill fabrication work 10 , mill fabrication work 11 , mill fabrication work 12 , mill fabrication work 13 , mill fabrication work 14 , mill fabrication work 15 , mill fabrication work 16 , mill fabrication work 17 , mill fabrication work 18 , mill fabrication work 19 , mill fabrication work 20 , mill fabrication work 21 , mill fabrication work 22 , mill fabrication work 23 , mill fabrication work 24 , mill fabrication work 25 , mill fabrication work 26 , mill fabrication work 27 , mill fabrication work 28 , mill fabrication work 29 , mill fabrication work 30 , mill fabrication work 31 , mill fabrication work 32 , mill fabrication work 33 , mill fabrication work 34 , mill fabrication work 35 , mill fabrication work 36 , mill fabrication work 37 , mill fabrication work 38 , mill fabrication work 39 , mill fabrication work 40 , mill fabrication work 41 , mill fabrication work 42, dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (8inch)., dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (6inch)., dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (4inch)., dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and installation a new pipeline (3inch)., fabricate and installation bends at various locations in the mill house (6inch)., fabricate and installation bends at various locations in the mill house (4inch)., fabricate and installation flanges at various locations in the mill house (10inch)., fabricate and installation flanges at various locations in the mill house (8inch)., fabricate and installation flanges at various locations in the mill house (6inch)., fabricate and installation flanges at various locations in the mill house (4inch)., fabricate and installation flanges at various locations in the mill house (3inch)., fabricate and installation nipples at various locations in the mill house (8inch)., fabricate and installation nipples at various locations in the mill house (6inch)., fabricate and installation nipples at various locations in the mill house (3inch)., fabricate and installation nipples at various locations in the mill house (1inch)., fabricate and installation reducers at various locations in the mill house (8inch)., fabricate and installation reducers at various locations in the mill house (6inch)., replace the damaged side plates and bottom plates of the cane carrier, leveler, chopper, secondary rake carrier, and rake carrier with the supplied plates (6/8/10 mm thick plates)., cut and remove the old runners of the cane carrier, secondary rake carrier, and inter rake carrier, and installation new runners., remove the corroded angles, beams, and channels beneath the runners of the cane carrier supporting angle, secondary rake carrier, and inter rake carrier, and installation new angles in their place., cut and remove the old trough of the inter rake carrier and secondary rake carrier installed in the mill house, fabricate and installation a new trough using the supplied 8/10 mm plate as per instructions, and conduct a satisfactory trial., cut, remove, reinstall the mill hole trough., cut and remove the tray beneath the mill trpf, fabricate and installation a new tray using the supplied 10/12 mm thick plate, and conduct a satisfactory trial., fabricate new juice rings for the mill rollers using 6/8 mm thick plate as per the sample., dismantle the damaged side plate of the fibrizer, place it in the scrap yard, fabricate and installation new side plates using the supplied 8/10 mm thick plate as before, and conduct a satisfactory trial., cut and remove the worn bed of the tail shaft of the secondary rake carrier and fabricate and installation a new one using a supplied 200 mm beam., fabricate and installation a new guard for the mill crown pinion and place the old damaged guard in the scrap yard., remove the damaged angles of the side plates of the cane carrier, secondary rake carrier, and inter rake carrier, and installation new angles in their place., remove the damaged juice tray of the trpf rollers installed on the mill head stocks, place it in the scrap yard, fabricate a new tray from the supplied 8/10 mm plate, and installation it in its original position., remove the 12inch size header installed on the mill screen juice line, fabricate a new header as per the sample, complete all connections as before, and conduct a satisfactory trial., fabricate a new delivery header for the screen juice tank (10inch size, 2.1 m length) along with 8 and 10 nipples, fabricate and erect it as per the sample, and conduct a satisfactory trial., cut the damaged top cover of the mill trpf, cut the supplied 8/10 mm plate, fabricate it as per the sample, installation it in its original position using the supplied 8/10 mm plate., dismantle the trpf bottom cover of mill no. 2, place it in the scrap yard, fabricate a new cover from the supplied 8/10 mm plate, installation it in position, and conduct a trial., dismantle the weak and damaged plates on both sides and the back of the chute of mill no. 2 trpf installed in the mill house, place them in the scrap yard, fabricate and installation new plates using the supplied 10/12 mm thick plate as before, and conduct a satisfactory trial., remove the old and damaged rail of the crane unloader trolley, installation the supplied new rail (40 x 40 mm), strengthen it, and conduct a trial., fabricate and installation new covers for the mill bearing housing., fabricate and installation the juice distribution tray in the pipeline of the mill juice pumps., carry out welding of the mill trpf rollers and repair by installing and welding the cut side plate., repair the racks of the secondary and inter rake carriers., weld the cut tail bar of the mill and fabricate it to the required size., carry out pineapple chevron grooving and cutting work on the mill rollers., carry out on-site forging of the side links of the cane carrier, bagasse carrier, elevator, and rbc chain, and fit pins and bushes as required to achieve the specified size.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
5.9L
View Documents
T18 Ref No : 16911052
Location : andal , west bengal
LIVE TENDER
tender for repairing and fabrication of chute of the existing tippler along with the platform plates and the side plates of the tippler at jambad colliery
Agency / Dept :
eastern coalfields limited ECL
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
2.98L
View Documents
T18 Ref No : 16921605
Location : najibabad , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for centrifugalhouse fabrication work 1 , centrifugalhouse fabrication work 2 , centrifugalhouse fabrication work 3 , centrifugalhouse fabrication work 4 , centrifugalhouse fabrication work 5 , centrifugalhouse fabrication work 6 , centrifugalhouse fabrication work 7 , centrifugalhouse fabrication work 8 , centrifugalhouse fabrication work 9 , centrifugalhouse fabrication work 10 , centrifugalhouse fabrication work 11 , centrifugalhouse fabrication work 12 , centrifugalhouse fabrication work 13 , centrifugalhouse fabrication work 14 , centrifugalhouse fabrication work 15 , centrifugalhouse fabrication work 16 , centrifugalhouse fabrication work 17 , centrifugalhouse fabrication work 18 , centrifugalhouse fabrication work 19 , centrifugalhouse fabrication work 20 , centrifugalhouse fabrication work 21 , centrifugalhouse fabrication work 22 , centrifugalhouse fabrication work 23 , centrifugalhouse fabrication work 24 , centrifugalhouse fabrication work 25 , centrifugalhouse fabrication work 26 , centrifugalhouse fabrication work 27, centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (12inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (6inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (4inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (3inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (2inch)., fabricate and installation bends at various locations in the centrifugal house (12inch)., fabricate and installation bends at various locations in the centrifugal house (8inch)., fabricate and installation bends at various locations in the centrifugal house (6inch)., fabricate and installation bends at various locations in the centrifugal house (4inch)., fabricate and installation bends at various locations in the centrifugal house (3inch)., fabricate and installation flanges at various locations in the centrifugal house (12inch)., fabricate and installation flanges at various locations in the centrifugal house (6inch)., fabricate and installation flanges at various locations in the centrifugal house (4inch)., fabricate and installation flanges at various locations in the centrifugal house (2inch)., fabricate and installation nipples at various locations in the centrifugal house (4inch)., fabricate and installation nipples at various locations in the centrifugal house (2inch)., open and reassemble valves at various locations in the centrifugal house (6inch)., open and reassemble valves at various locations in the centrifugal house (4inch)., open and reassemble valves at various locations in the centrifugal house (3inch)., open and reassemble valves at various locations in the centrifugal house (2inch)., centrifugal no. 1 & 2 and kcp machine no. 1 & 2, cut and remove the damaged monitor casing and ribs, repair them using 10/12 mm ms plate, and carry out a satisfactory trial., in kcp machine no. 1 & 2, cut and remove the damaged center shaft and arm inside the pug mill, fabricate a new one from 8 to10 mm plate, installation it, and conduct a satisfactory trial., dismantle the damaged portion of the upper cover of continuous machines no. 6 and 7 and put it in the scrap yard, then fabricate and installation a new cover using 10/12 mm plate, making holes as per the sample, and fit the feed/flow pipe, dismantle the damaged plate of the sugar discharge chute from the sugar elevator to the sugar grader, fabricate and installation a new one from 6 mm thick plate, and dispose of the scrap in the scrap yard., remove the old tray of sugar hopper no. 1, dispose of it in the scrap yard, fabricate and installation a new one from 3/5 mm ms plate, and carry out a satisfactory trial., remove the transient heater installed above the c centi machine, open its side plates, clean it, carry out hydraulic testing, reinstall it in its original position, and complete all connections., centrifugal machine no. 4, cut and remove the damaged/weak top and bottom sugar discharge chute along with the flange, and dispose of it in the scrap yard. fabricate a new chute as per the sample using a 6 mm ms plate, prepare all required connections such as angles, channels, etc., installation it on the side, and conduct a satisfactory trial.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
2.3L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16956869
Location : najibabad , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for centrifugalhouse fabrication work 1 , centrifugalhouse fabrication work 2 , centrifugalhouse fabrication work 3 , centrifugalhouse fabrication work 4 , centrifugalhouse fabrication work 5 , centrifugalhouse fabrication work 6 , centrifugalhouse fabrication work 7 , centrifugalhouse fabrication work 8 , centrifugalhouse fabrication work 9 , centrifugalhouse fabrication work 10 , centrifugalhouse fabrication work 11 , centrifugalhouse fabrication work 12 , centrifugalhouse fabrication work 13 , centrifugalhouse fabrication work 14 , centrifugalhouse fabrication work 15 , centrifugalhouse fabrication work 16 , centrifugalhouse fabrication work 17 , centrifugalhouse fabrication work 18 , centrifugalhouse fabrication work 19 , centrifugalhouse fabrication work 20 , centrifugalhouse fabrication work 21 , centrifugalhouse fabrication work 22 , centrifugalhouse fabrication work 23 , centrifugalhouse fabrication work 24 , centrifugalhouse fabrication work 25 , centrifugalhouse fabrication work 26 , centrifugalhouse fabrication work 27, centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (12inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (6inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (4inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (3inch)., centrifugal & drier house dismantle the damaged pipeline at various locations, dispose of it in the scrap yard, and installation a new pipeline (2inch)., fabricate and installation bends at various locations in the centrifugal house (12inch)., fabricate and installation bends at various locations in the centrifugal house (8inch)., fabricate and installation bends at various locations in the centrifugal house (6inch)., fabricate and installation bends at various locations in the centrifugal house (4inch)., fabricate and installation bends at various locations in the centrifugal house (3inch)., fabricate and installation flanges at various locations in the centrifugal house (12inch)., fabricate and installation flanges at various locations in the centrifugal house (6inch)., fabricate and installation flanges at various locations in the centrifugal house (4inch)., fabricate and installation flanges at various locations in the centrifugal house (2inch)., fabricate and installation nipples at various locations in the centrifugal house (4inch)., fabricate and installation nipples at various locations in the centrifugal house (2inch)., open and reassemble valves at various locations in the centrifugal house (6inch)., open and reassemble valves at various locations in the centrifugal house (4inch)., open and reassemble valves at various locations in the centrifugal house (3inch)., open and reassemble valves at various locations in the centrifugal house (2inch)., centrifugal no. 1 & 2 and kcp machine no. 1 & 2, cut and remove the damaged monitor casing and ribs, repair them using 10/12 mm ms plate, and carry out a satisfactory trial., in kcp machine no. 1 & 2, cut and remove the damaged center shaft and arm inside the pug mill, fabricate a new one from 8 to 10 mm plate, installation it, and conduct a satisfactory trial., dismantle the damaged portion of the upper cover of continuous machines no. 6 and 7 and put it in the scrap yard, then fabricate and installation a new cover using 10/12 mm plate, making holes as per the sample, and fit the feed/flow pipe, dismantle the damaged plate of the sugar discharge chute from the sugar elevator to the sugar grader, fabricate and installation a new one from 6 mm thick plate, and dispose of the scrap in the scrap yard., remove the old tray of sugar hopper no. 1, dispose of it in the scrap yard, fabricate and installation a new one from 3/5 mm ms plate, and carry out a satisfactory trial., remove the transient heater installed above the c centi machine, open its side plates, clean it, carry out hydraulic testing, reinstall it in its original position, and complete all connections., centrifugal machine no. 4, cut and remove the damaged/weak top and bottom sugar discharge chute along with the flange, and dispose of it in the scrap yard. fabricate a new chute as per the sample using a 6 mm ms plate, prepare all required connections such as angles, channels, etc., installation it on the side, and conduct a satisfactory trial.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
2.3L
View Documents
T18 Ref No : 16955498
Location : najibabad , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for boiler fabrication work 1 , boiler fabrication work 2 , boiler fabrication work 3 , boiler fabrication work 4 , boiler fabrication work 5 , boiler fabrication work 6 , boiler fabrication work 7 , boiler fabrication work 8 , boiler fabrication work 9 , boiler fabrication work 10 , boiler fabrication work 11 , boiler fabrication work 12 , boiler fabrication work 13 , boiler fabrication work 14 , boiler fabrication work 15 , boiler fabrication work 16 , boiler fabrication work 17 , boiler fabrication work 18, replace the old runner of the bagasse elevator, bagasse carrier, and return bagasse carrier, and installation a new runner., cut and remove the bottom plate of the bagasse elevator, bagasse carrier, and return bagasse carrier, and replace it with the supplied 6 mm plate., remove the damaged side plate of the boiler and replace it with a 3/5 mm plate., cut and remove the expansion joint installed in the boiler flue gas ducting, fabricate a new one from a 3/5 mm plate, and installation it., cut and remove the damaged casing of the bagasse fan, fabricate a new one from the supplied 8 mm ms plate, and installation it., remove the damaged angle/channel installed beneath the bagasse elevator, bagasse carrier, and return bagasse carrier, and replace it with a new angle/channel., cut and remove the damaged furnace chute of boiler no. 2, fabricate a new one from a 6/8 mm plate, and installation it., cut and remove the damaged casing of the boiler id fan, fabricate a new one from the supplied 6 mm plate, and installation it., cut and dismantle the suction cone of the id fan installed on the boiler, fabricate a new section cone from a 6 mm ms plate, and installation it., cut and remove the damaged plate and flue gas duct of the boiler wet scrubber, replace them with the supplied 3/5 mm plate, and carry out strengthening., cut and remove the damaged manhole (size 400 mm x 400 mm) of the boiler wet scrubber, fabricate a new one, and installation it., cut and remove the worn-out chute of the boiler bagasse feeder, fabricate a new one from the supplied ms plate, and installation it., dismantle the damaged pipeline at various locations in the boiler house, dispose of it in the scrap yard, and installation a new 6-inch pipeline., dismantle the damaged pipeline at various locations in the boiler house, dispose of it in the scrap yard, and installation a new 4-inch pipeline., fabricate and installation 6-inch bends at various locations in the boiler house., fabricate and installation 4-inch bends at various locations in the boiler house., fabricate and installation 6-inch flanges at various locations in the boiler house., fabricate and installation 4-inch flanges at various locations in the boiler house.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
4.5L
View Documents
T18 Ref No : 17001103
Location : bermo , jharkhand
LIVE TENDER
tender for dismantling, fabrication, erection of dewatering screen base frame, platform, replacement of bearing housing, installation of traverse pipe, feed and discharge chute, final alignment, trial run, testing and commissioning at deshaling plant, sawang wa
Agency / Dept :
central coalfields limited CCL
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
3.73L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16211132
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders
corrigendum tender for erection and fabrication work a 1 , erection and fabrication work a 2 , erection and fabrication work a 3 , erection and fabrication work a 4 , erection and fabrication work a 5 , erection and fabrication work a 6 , erection and fabrication work a 7 , erection and fabrication work a 8 , erection and fabrication work a 9 , erection and fabrication work a 10 , erection and fabrication work a 11 , erection and fabrication work a 12 , erection and fabrication work a 13 , erection and fabrication work a 14 , erection and fabrication work a 15 , erection and fabrication work a 16 , erection and fabrication work a 17 , erection and fabrication work a 18 , erection and fabrication work a 19 , erection and fabrication work a 20 , erection and fabrication work a 21 , erection and fabrication work a 22 , erection and fabrication work a 23 , erection and fabrication work a 24 , erection and fabrication work a 25 , erection and fabrication work a 26 , erection and fabrication work a 27 , erection and fabrication work a 28 , erection and fabrication work a 29 , erection and fabrication work a 30 , erection and fabrication work a 31 , erection and fabrication work a 32 , erection and fabrication work a 33 , erection and fabrication work a 34 , erection and fabrication work a 35 , erection and fabrication work a 36 , erection and fabrication work a 37 , erection and fabrication work a 38 , erection and fabrication work a 39 , erection and fabrication work a 40 , erection and fabrication work a 41 , erection and fabrication work a 42 , erection and fabrication work a 43 , erection and fabrication work a 44 , erection and fabrication work a 45 , erection and fabrication work a 46 , erection and fabrication work a 47 , erection and fabrication work a 48 , erection and fabrication work a 49 , erection and fabrication work a 50 , erection and fabrication work a 51 , erection and fabrication work a 52 , erection and fabrication work a 53 , erection and fabrication work a 54 , erection and fabrication work a 55 , erection and fabrication work a 56 , erection and fabrication work a 57 , erection and fabrication work a 58 , erection and fabrication work a 59 , erection and fabrication work a 60 , erection and fabrication work a 61 , erection and fabrication work a 62 , erection and fabrication work a 63 , erection and fabrication work a 64 , erection and fabrication work a 65 , erection and fabrication work a 66, erection and fabrication work a, cut out and remove the weakened and worn-out portions of the discharge chute of the mill scraper. fabricate new sections using 12 mm thick plates, reinstall them, and provide perforated plates as per the scraper profile. weld and fix them securely, then conduct a satisfactory trial. remove the worn-out runner base of the cane carrier. fabricate a new runner base using a 100 mm channel box, installation it, and straighten, reverse, and reinstall the old channel. remove the worn 40/50 mm square bars of the cane unloader and replace them with new square bars of the same size. conduct a satisfactory trial. remove the worn runners of the cane carrier, rake carrier, bagasse elevator, and r.b.c. replace them by reversing the old runners or installing new runners as required. remove the worn or damaged side plates of the chains of the cane carrier, rake carrier, and r.b.c. replace them with repaired old plates or new plates. remove the worn side plates of the fibrizer hood. installation new plates, weld them from both inside and outside, and conduct a satisfactory trial. carry out complete overhauling, testing, and trial of the bagasse baling machine. perform the required repairs on the old racks of the s.r.c. and i.r.c. fabricate new racks for the bagasse elevator/r.b.c. chains as per the sample. fabricate and installation new top and bottom covers of the t.r.p.f. as per the existing design and conduct a satisfactory trial. remove the worn tail-end boots of the s.r.c./i.r.c. fabricate new boots from 8 mm/10 mm thick plates as per the sample, installation them, carry out leak-proof welding, and conduct a satisfactory trial. dismantle the grabs of the cane unloaders, repair all parts, perform hardfacing on the fingers as instructed, reassemble the grabs, and conduct a satisfactory trial. remove the damaged juice tray used for compound imbibition in the mills. fabricate and installation a new tray as per the sample and reconnect all fittings. remove the worn guides provided to prevent the chains of the cane carrier, s.r.c., i.r.c., and bagasse elevator from lifting. fabricate and installation new guides as instructed and conduct a satisfactory trial. repair the worn wheels of the bridge/trolley drive of the cane unloaders by welding as instructed. remove the damaged twin chutes of the t.r.p.f. fabricate new twin chutes matching the existing design and erect them in position. fabricate and fit m.s. rings on the idler wheels of the cane carrier. provide a 25 mm thick plate support between the mill headstock and the t.r.p.f. headstock as instructed. repair the old hammer shanks of the fibrizer by welding, hardfacing, and balancing. remove the damaged hoods of the cane chopper/leveller. fabricate and installation new folding-type hoods. replace the broken pocket plates of the pocket-type anvil plate of the fibrizer with new plates. straighten bent plates, weld them, and perform hardfacing as instructed. build up the worn hub surfaces of the cane leveller/chopper rotor assembly by welding, machine them flat, and perform hardfacing. remove the weakened motor and gearbox beds of the cane unloaders. fabricate modified new beds, installation them, align the motor and gearbox, and conduct a trial. strengthen the weakened columns of the cane carrier structure by welding reinforcing plates. fabricate and fit juice rings in the mill rollers as per the sample. carry out the required repairs to the pressure chutes between the t.r.p.f. and the mill. remove the damaged mill juice receiving tank. fabricate a new tank using 8 mm/10 mm thick plates, installation it, reconnect all connections, and conduct a leak-proof trial. remove the damaged bottom cone of the mill juice receiving tank. fabricate and installation a new cone as per the sample, reconnect all fittings, and conduct a leak-proof trial. remove the damaged 10"/12" pipes between the mill juice tray and the gutter. fabricate and installation new stainless steel pipes and conduct a leak-proof trial. provide 3 mm thick stainless steel lining in the bottom trough of the s.r.c./i.r.c. with leak-proof welding. remove the loose bed of boiler feed pump no. 1, fabricate and installation a new bed, reconnect all fittings, and conduct a trial. fabricate a leak-proof damper in the old i.d. fan ducting before the chimney so that there is no backflow of air when the new i.d. fan operates. remove the nipple reducers and damaged pipelines of all three wet scrubber pumps. installation new pipelines and carry out leak-proof welding. remove all nozzles inside the wet scrubber venturi, replace damaged nozzles with new ones, and reconnect all fittings. fabricate a new backwash pipeline from old boiler tubes between the service tank and wet scrubber. installation new valves, clamps, and complete all connections. remove the damaged juice tray below the t.r.p.f. leading to the mill juice tray. fabricate and installation a new tray. remove damaged ash chutes of the boilers. fabricate new chutes from old/new plates matching the original design and installation them. repair the damaged dampers of air heaters, economizers, and f.d./i.d. fan inlet, outlet, suction, and delivery ducts. fabricate new frames and fit new mesh/screens for the internal steam filters of the boiler drums. remove the damaged flue gas ducting between the i.d. fans and chimney. fabricate and installation new ducting from 5–6 mm thick plates and conduct a leak-proof trial. fabricate new impellers for the bagassilo fan as per the sample, repair the casing, and conduct a successful trial. remove the damaged suction cones of the i.d./f.d. fan casings. fabricate and installation new cones as per the sample and conduct a satisfactory trial. replace the damaged perforated baffle plates inside the boiler feed tank. remove and repair the damaged bagasse feeding chutes of boilers 1, 2, and 3. replace the damaged air headers supplying additional f.d. air to the furnaces of 20-ton boilers 1 and 2. replace the damaged ducting between the air heater and i.d. fan with new ducting made from 5–6 mm thick plates. replace damaged perforated screens used for bagasse filtration in the bagasse elevator. remove the economizer coils/tubes of 20-ton boilers 1 and 2, clean them internally and externally, conduct hydraulic testing, reinstall them, make them leak-proof, and carry out final hydraulic testing. remove damaged trough channels/plates of the s.r.c./i.r.c., fabricate replacements as instructed, and installation them. fabricate and installation angle iron strengthening rings on the boiler chimney. strengthen the damaged truss-type bridge structure of the cane unloader using new channels, angles, and plates. weld and restore the enlarged holes of the block-type chain links of the s.r.c./i.r.c., redrill pin holes, and grind the surfaces smooth. replace the worn rack attachment links of the s.r.c./i.r.c. chains with new 12 mm thick plate attachments, weld them, and drill holes as per the drawing. construct separate access platforms for all three cane unloaders using old angle channels. replace the damaged portions of the i.d. fan casing, air heater cell/ducting, and economizer cell. replace the old m.s. plates of the s.r.c./i.r.c. trough and boot, make them leak-proof, and provide 3 mm stainless steel lining. fabricate new racks for the s.r.c./i.r.c. chains from 25 mm thick plates, drill holes, and provide roller supports at both ends. remove the bent 250 mm channel of the cane unloader trolley, restore line and level, strengthen the structure, fit a new runner square bar, check diagonals, and align the wheels. dismantle all four wheels of the mill and powerhouse cranes, clean them, inspect bearings, grease all plumber blocks, replace damaged bearings from mill spares, repair worn wheels by welding, and conduct a satisfactory trial. repair the worn shells and teeth of the t.r.p.f. top and bottom rollers by hardfacing. fit rings on both sides to compensate for reduced shell length. remove the damaged mill juice tray and fabricate a new tray using 5 mm stainless steel plate as per the sample. conduct a leak-proof trial. repair the stainless steel juice tray of the mill. remove the mill headstock if cracked or misaligned, re-grout it, realign it, and complete all associated works. remove the shaft of the damaged t.r.p.f. roller and dismantle the shell using gas cutting. cut old 63.5 mm boiler tubes with bends, prepare 5.1-meter straight tubes for the air heater, and clean them by grinding.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 13, 2026
Tender Value :
16.57L
View Documents
T18 Ref No : 15982890
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders
tender for erection and fabrication work a erection and fabrication work a 1 , erection and fabrication work a 2 , erection and fabrication work a 3 , erection and fabrication work a 4 , erection and fabrication work a 5 , erection and fabrication work a 6 , erection and fabrication work a 7 , erection and fabrication work a 8 , erection and fabrication work a 9 , erection and fabrication work a 10 , erection and fabrication work a 11 , erection and fabrication work a 12 , erection and fabrication work a 13 , erection and fabrication work a 14 , erection and fabrication work a 15 , erection and fabrication work a 16 , erection and fabrication work a 17 , erection and fabrication work a 18 , erection and fabrication work a 19 , erection and fabrication work a 20 , erection and fabrication work a 21 , erection and fabrication work a 22 , erection and fabrication work a 23 , erection and fabrication work a 24 , erection and fabrication work a 25 , erection and fabrication work a 26 , erection and fabrication work a 27 , erection and fabrication work a 28 , erection and fabrication work a 29 , erection and fabrication work a 30 , erection and fabrication work a 31 , erection and fabrication work a 32 , erection and fabrication work a 33 , erection and fabrication work a 34 , erection and fabrication work a 35 , erection and fabrication work a 36 , erection and fabrication work a 37 , erection and fabrication work a 38 , erection and fabrication work a 39 , erection and fabrication work a 40 , erection and fabrication work a 41 , erection and fabrication work a 42 , erection and fabrication work a 43 , erection and fabrication work a 44 , erection and fabrication work a 45 , erection and fabrication work a 46 , erection and fabrication work a 47 , erection and fabrication work a 48 , erection and fabrication work a 49 , erection and fabrication work a 50 , erection and fabrication work a 51 , erection and fabrication work a 52 , erection and fabrication work a 53 , erection and fabrication work a 54 , erection and fabrication work a 55 , erection and fabrication work a 56 , erection and fabrication work a 57 , erection and fabrication work a 58 , erection and fabrication work a 59 , erection and fabrication work a 60 , erection and fabrication work a 61 , erection and fabrication work a 62 , erection and fabrication work a 63 , erection and fabrication work a 64 , erection and fabrication work a 65 , erection and fabrication work a 66, erection and fabrication work a, cutting and removing the weak/broken parts of the discharge chute for the scraper in the mill, fabricating new parts from 12 mm plate, reinstalling them, fixing hole plates as per profile by welding to secure the scraper, and conducting a trial after completion of work., cutting and removing the worn/weak runner base of the cane carrier, fabricating a box structure using 100 mm channel to installation the runner base, fitting it properly, and straightening and reusing the old channel by turning it over., cutting and removing the old worn/cut 40/50 mm square bars of the cane unloader and installing new square bars in their place as before, followed by a satisfactory trial., cutting and removing the worn/cut runners of the cane carrier/rake carrier/bagasse elevator/r.b.c., reinstalling them by either turning over the old ones or fitting new runners as per original design., cutting and removing the worn/cut/weak side plates of chains used in cane carrier/rake carrier/r.b.c., and installing old or new plates in their place., cutting and removing the worn/weak side plates of the fibrizer hood, installing new plates, welding inside and outside, and conducting a satisfactory trial., complete overhauling, testing, and trial of the bagasse baling machine., performing necessary repairs on the old racks of s.r.c./i.r.c., fabricating new racks as per sample for the chains of bagasse elevator/r.b.c., replacing the weak/broken bottom/top covers of t.r.p.f. by fabricating and installing new covers as per original design, and conducting a satisfactory trial., cutting and removing the weak/broken tail end boots of s.r.c./i.r.c., fabricating new ones from 8.0/10.0 mm old/new plate as per sample, installing, leak-proof welding, and conducting a satisfactory trial., dismantling various parts of the cane unloader grabs, repairing all parts, hardfacing the fingers as per instructions, and reassembling the grabs., cutting and removing the weak/broken juice tray used for compound imbibition in mills, fabricating a new tray from plate as per sample, installing it in place, and making all connections., cutting and removing the worn/weak guides that prevent chains of cane carrier/s.r.c./i.r.c. and bagasse elevator from lifting, fabricating new guides as per instructions, installing them, and conducting a satisfactory trial., welding the worn/cut wheels of the cane unloader bridge/trolley drive as per instructions., cutting and removing the weak/broken donali chutes of t.r.p.f., fabricating new donali chutes as per the old ones, and erecting them in place., fabricating and installing m.s. rings on the idler wheel of the cane carrier as per instructions., fabricating and installing a support using 25.0 mm plate between the mill head stock and t.r.p.f. head stock as per instructions., repairing and balancing the old hammer shanks of the fibrizer by welding and hardfacing as per instructions., cutting and removing the worn/weak hoods of the cane chopper/leveller and fabricating a new folding type from new plate and installing it., replacing the broken plates in the pockets of the fibrizer's pocketed type anvil plate with new plates, straightening bent plates, welding, and hardfacing as per instructions., welding and leveling the worn hubs of the cane leveller/chopper rotor assembly on the working side and top sides, and hardfacing as per instructions., cutting and removing the weak beds of reduction gears and motors on cane unloaders, modifying and fabricating new beds, installing them, aligning the gear and motor, and conducting a trial., strengthening the weak/broken columns of the cane carrier structure by welding plates as per instructions., fabricating and fitting juice rings in the mill rollers as per sample., performing necessary repairs on the pressure chutes installed between t.r.p.f. and the mill., cutting and removing the weak/broken juice receiving tank of the mills, fabricating a new tank from 8.0/10.0 mm plate as per sample, fitting it in place, making all connections, and conducting a leak-proof trial., cutting and removing the weak/broken bottom cone of the mill's juice receiving tank, fabricating a new cone as per sample, fitting it in place, making all connections as before, and conducting a leak-proof trial., cutting and removing the weak/broken 10 inch/12 inch pipes between the mill juice tray and gutter, fabricating and fitting new s.s. pipes in their place, and conducting a leak-proof trial., lining the bottom trough of s.r.c./i.r.c. with 3.00 mm thick s.s. plate and doing leak-proof welding., removing the shifted bed of feed pump no. 1 on the boiler, fabricating and installing a new bed, making related connections, and conducting a trial., making the damper in the old i.d. fan ducting at the boiler station leak-proof using new/old plate before the chimney and doing complete welding so that when the new i.d. runs, there is no back air from the chimney., cutting and removing the nipple reducers of all three wet scrubber pumps and their leaking pipe lines, installing new pipe lines, and making all connections as before with leak-proof welding., opening all nozzles inside the wet scrubber venturi, removing damaged nozzles, installing new nozzles, and making all connections as before., fabricating new pipes from old boiler tubes for backwash from the service tank to the wet scrubber, and making all connections with new valves and clamps in the pipeline., cutting and removing the weak and leaking juice tray from under the t.r.p.f. that brings juice to the mill juice tray, and fabricating and installing a new one., cutting and removing the weak/broken ash chutes of the boilers, and fabricating and fitting new chutes from old/new plate as per the old ones., performing necessary repairs on the weak/broken dampers of air heaters, economizers, and f.d./i.d. fans' inlets/outlets or suction/delivery., replacing the frames and grids of the internal steam filter fitted in the boiler drums by fabricating new frames and fitting grids., cutting and removing the weak/broken flue gas ducting between the i.d. fans and the chimney, fabricating and installing new ducting from 5.0/6.0 mm thick plate, and conducting a leak-proof trial., for the weak bagassilo fan, fabricating a new impeller as per sample, repairing the casing as necessary, and conducting a successful trial., cutting and removing the weak/broken suction cones in the casings of i.d./f.d. fans, fabricating and installing new cones as per sample, and conducting a successful trial., replacing the damaged weak grids/perforated sheets of the baffle plates inside the boiler feed tank., cutting and removing the weak/broken bagasse feeding chutes of boiler no. 1, 2, and 3, and performing necessary repairs., replacing the weak/broken air headers installed outside for supplying additional f.d. air in the furnace of 20-ton capacity boiler no. 1 and 2 with new headers., cutting the weak/broken ducting between the air heater and i.d. fans and fabricating and installing new ducting from 5/6 mm thick plate., removing damaged perforated grids in the bagasse elevator used for bagasse to bagassilo filtration and fitting new grids., lowering the economizer coils/tubes of 20-ton capacity boiler no. 1 and 2, cleaning them internally and externally, conducting hydraulic testing at standard pressure, and after testing, lifting and refitting them, making the economizer bands leak-proof, and conducting a satisfactory hydraulic test., cutting and removing the weak/broken channel/plate of the s.r.c./i.r.c. trough and fabricating and installing new ones as per instructions., fabricating and installing angle iron rings for strengthening the boiler chimney., strengthening the weak and damaged truss-type bridge structure of the cane unloader by adding new channels, angles, and plates to provide satisfactory strength., welding the oval/worn enlarged holes on both ends of the block-type chain links of s.r.c./i.r.c. chains, drilling pin-size holes in the attachment, and grinding the faces to level., cutting and removing the worn/weak attachment used for fixing racks on the block-type chain links of s.r.c./i.r.c. chains, fabricating new attachment links from 12 mm thick plate as before, welding them onto the links, and drilling holes as per drawing., constructing a separate platform path using old angle channels for access to all three unloaders., replacing the weak/broken parts of i.d. fan casing, air heater cell/ducting, and economizer cell., cutting and removing the old m.s. plate of the bottom trough and boot of s.r.c./i.r.c., installing new plate to make the trough and boot leak-proof, and lining the boot and trough with 3 mm thick s.s. plate, followed by a satisfactory trial., fabricating new racks from 25 mm thick plate as per sample for s.r.c./i.r.c. chains, drilling holes, cutting and supporting chain rollers on both ends, and preparing them., removing the bent 250 mm channel of the trolley in the cane unloader, leveling it, strengthening the structure, fitting worn/weak runner square bars, checking diagonals, and leveling the wheel., removing all four wheels of the mill and power house crane, cleaning, checking bearings, greasing all plumber blocks, replacing damaged bearings with mill spares, welding worn wheels to a uniform size, and conducting a satisfactory trial., performing necessary repairs and hardfacing on the worn shells/teeth of t.r.p.f. top/bottom rollers, and adding rings on both sides as needed to compensate for reduced shell length., cutting and removing the weak/leaking juice tray of the mill and fabricating a new one from 5 mm s.s. plate as per sample, and conducting a leak-proof trial., performing necessary repairs on the damaged s.s. juice tray of the mill., in case of head stock cracking or misalignment, removing the head stock, regrouting, aligning, and completing all related work., removing the shaft of the damaged t.r.p.f. roller and dismantling the shell using gas cutting., cutting the 63.5 mm old boiler tubes with bends, making a 5.1 meter straight line, preparing them for the air heater, and cleaning them by grinding.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 10, 2026
Tender Value :
16.57L
View Documents
T18 Ref No : 16211058
Location : najibabad , uttar pradesh
Source : GEM Tenders
tender for works related to semikestner 1000 msq pipeline , wash out pipeline header to new quad body no 1 , raw juice pump pipeline , syrup pipeline cleaning work , syrup sulphiter pipeline , new quad no 4 extension catcher vapour body , bagassilo fan repair , big filter mud tray repair , vacuum air line work , pipe fabrication , clear juice tank repair , pump and motor alignment , juice heater repair , condensate bottle fabrication , clarifier repair , cane carrier repair , secondary rack carrier repair , rack carrier repair , cane carrier runner replacement , secondary rack carrier runner replacement , rack carrier runner replacement , cane carrier structural repair , rack carrier structural repair , cane carrier chain beam repair , inter rack carrier trough repair , mill trough repair , trpf lower plate repair , mill roller repair , leveler repair , fiberizer repair , secondary rack carrier trough repair , tail shaft bed repair , mill pinion repair , cane carrier angle replacement , secondary rack carrier angle replacement , trpf roller juice plate repair , cold water pipeline work , bearing cooling line replacement , pipe fittings , mill juice pipeline work , hot water pipeline work , screen juice pipeline work , flange work , nipple work , mill fabrication work , header fabrication , delivery header fabrication , trpf tank repair , transmission gear repair , juice pump pipeline work , reducer fabrication , flange fabrication , band fabrication , trpf cover fabrication , trpl chute repair , crane unloader rail replacement , bearing housing repair , juice distribution tray fabrication , trpf roller repair , rack repair work , crown pinion guard repair , tail bar repair , trpf water cover repair , mill roller grooving , chain link forging work, fabrication and installation of 6 inch tee in the pipeline complete as required, dismantling of existing 8 inch ms pipeline complete, reinstallation of 8 inch ms pipeline at the designated position including alignment welding testing and successful trial run, opening/removal of existing 8 inch valve, installation of 8 inch valve at the designated location complete, supply fabrication and installation of 8 inch flange complete, supply and installation of 8 inch nipple complete, dismantling of existing 8 inch and 6 inch pipelines including removal from site, reinstallation of 8 inch and 6 inch pipelines at the designated position including alignment welding testing and successful trial run, dismantling of existing 8 inch raw juice pump pipeline and disposal of dismantled material at the designated scrap yard, reinstallation of 8 inch ms pipeline including alignment welding testing and successful trial run, fabrication and installation of 8 inch x 6 inch reducer complete, fabrication and installation of 8 inch flange complete, removal and reinstallation of 8 inch valve at the designated location complete, fabrication and installation of 8 inch nipple complete, dismantling of existing 6 inch syrup pipeline from syrup pump to syrup tank complete, fabrication and installation of 6 inch x 3 inch reducer complete, fabrication and installation of 2 inch flange complete, fabrication of 6 inch nipple complete, opening/removal of existing 6 inch valve, refitting and fastening of 6 inch valve after maintenance complete, fabrication and installation of 6 inch tee complete, fabrication and installation of 8 inch bend complete, fabrication and installation of 800 mm diameter nipple complete, dismantling of existing 8 inch pipeline complete, reinstallation of 8 inch pipeline at the designated position including alignment welding testing and successful trial run, fabrication and installation of 8 inch tee complete, dismantling of damaged extension catcher vapour body of new quad no 4 removal of corroded angle channels disposal of scrap at the designated scrap yard fabrication of a new catcher from 10 mm thick ms plate by bending installation at site completion of all necessary connections and successful trial run approximate size diameter 160 m x length 620 m, cutting and removing damaged casing of bagassilo fan fabrication using supplied 8/10 mm ms plate installation and satisfactory trial, cutting and removing damaged mud tray of big filter disposal of scrap fabrication using supplied 8/10 mm ms plate installation and satisfactory trial (approx dia 375 m x length 860 m), dismantling of 6 inch vacuum air line with filter, fixing of 6 inch vacuum air line in position including alignment and satisfactory trial, fabrication and installation of 6 inch ms flange, fabrication and installation of 6 inch ms tee, fabrication and installation of 6 inch ms nipple, cutting and removing corroded box of clear juice liquidation tank door fabrication using 8 mm ms plate installation all connections and satisfactory trial (approx size 10 m x 10 m), fitting fixing alignment of ms band for 120 hp clear juice pump and motor including satisfactory trial, replacement of strip and flat iron for top and bottom header rubber packing fixing new rubber packing and satisfactory trial, removal of condensate bottle of juice heater/quad semicaser/vapor cell fabrication of new bottle using supplied 8/10 mm ms plate and installation, removal of corroded distributor from clarifier compartment disposal of scrap fabrication of new distributor using 6/8 mm ms plate installation and satisfactory trial, replacement of damaged side and bottom plates of cane carrier using supplied 6 mm ms plate, replacement of damaged side and bottom plates using supplied 6 mm ms plate, replacement of damaged side and bottom plates of rack carrier no1 2 & 3 using supplied 6 mm ms plate, cutting and removing old runner and fixing new runner for cane carrier, cutting and removing old runner and fixing new runner, cutting and removing old runner and fixing new runner for rack carrier no1 2 & 3, removal of corroded supporting angles/channels and installation of new supporting angle, removal of corroded angles/channels and installation of new angle, replacement of 150 mm chain beam, removal of old trough of inter rack carrier no1 2 & 3 fabrication using supplied 8/10 mm ms plate and installation, cutting and replacing damaged trough of mill no3 & 4 including satisfactory trial, removal of damaged lower plate under trpf of mill no2 & 3 fabrication using supplied 10/12 mm ms plate and installation, fabrication of new juice rings for mill rollers using supplied 6/8 mm ms plate as per sample, dismantling damaged side plates of leveler disposal of scrap fabrication and installation of new 8/10 mm ms side plates, dismantling damaged side plate of fiberizer disposal of scrap fabrication and installation of new 8/10 mm ms side plate, removal of old trough fabrication using supplied 8/10/12 mm ms plate and installation, cutting and removing worn tail shaft bed of secondary rack carrier fabrication using supplied 200 mm beam and installation, fabrication and installation of new pinion gear for mill no3 removal of old gear and disposal to scrap yard, removal of damaged angles from cane carrier side plate/inter rack carrier 2 & 3 and installation of new angles, removal of damaged angles from secondary rack carrier/inter rack carrier 2 & 3 fabrication and installation of new angles, removal of damaged juice plate of trpf rollers fabrication using supplied 8/10 mm ms plate and installation, dismantling of existing 4 inch cold water pipeline from mill no1 to mill no3 and installation of new pipeline, removal of worn bearing cooling line from mill no1 to 4 and installation of new 3 inch pipeline complete with flange and nipple, supply/fabrication and installation of 3 inch flange, supply/fabrication and installation of 1 inch nipple, cutting and removing old 6 inch mill juice pipeline from mill juice pump no 3 to mill no 1 and installing new 6 inch ms pipeline complete with fitting and testing, dismantling existing 4 inch dia hot water pipeline from mill no 3 to mill no 4 and installing new pipeline complete with fittings and testing, cutting and removing old pipeline from mill juice pump no 4 to mill no 2 and installing new 6 inch ms pipeline complete with fittings and testing, cutting and removing old pipeline from mill screen juice pump to raw juice tank and installing new 6 inch & 8 inch pipeline complete with fittings and testing, dismantling and installation of 6 inch flange, dismantling and installation of 8 inch flange, dismantling and installation of 10 inch flange, dismantling and installation of 4 inch nipple, dismantling and installation of 6 inch nipple, dismantling and installation of 8 inch nipple, fabrication and preparation of mill beds complete as required, removing existing 12 inch screen juice header fabricating new header as per sample erection reconnection and satisfactory trial, fabrication and installation of new 10 inch delivery header (21 m long) for screen juice tank including 8 inch & 10 inch nipples erection and testing, cutting damaged top cover of trpf tank fabrication using supplied 8/10 mm ms plate installation and satisfactory trial, inspection and repair/checking of bottom cover of transmission gear of mill no 4 as per sample, installation of 6 inch juice pump pipeline complete with fitting and testing, fabrication and installation of 6 inch reducer in the pipeline, fabrication and installation of 8 inch reducer in the pipeline, fabrication and installation of 6 inch flange in the pipeline, fabrication and installation of 4 inch flange in the pipeline, fabrication and installation of 6 inch pipe band/support, fabrication of top cover for trpf sluice installed in mill house, removing damaged angles of cane carrier side plate and inter rack carrier no 2 & 3 and installing new angles, removing damaged angles of secondary rack carrier and inter rack carrier no 2 & 3 and installing new angles, dismantling damaged side and back plates of trpl chute of mill no 2 fabrication using supplied 10/12 mm ms plate installation and satisfactory trial, removing damaged rail of crane unloader trolley installing new 40 x 40 mm rail strengthening and testing, fabrication and installation of new cover for mill bearing housing, fabrication and installation of juice distribution trays in mill juice pipeline at designated locations, welding and repair of trpf rollers including welding and correction of damaged side plates, repair of secondary rack carrier and inter rack carrier racks, removing damaged water guard of crown pinion of mill no 3 fabrication of new guard from supplied 2/3 mm plate and installation, welding and fabrication of cut tail bars of mill no 1 & 3 as per required dimensions, dismantling damaged trpf water cover of mill no 2 fabrication using supplied 8/10 mm ms plate installation and satisfactory trial, carrying out pineapple (chevron) grooving/cutting work on mill rollers, forging of side links of cane carrier bagasse carrier elevator and rbc chain including fitting of pins and bushes profiling and finishing to required size
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 27, 2026
Tender Value :
2L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16144713
Location : rupnagar , punjab
corrigendum tender for 743/p-1/empw-13354 dtd.22.06.2026 fabrication of hoppers and chutes of wagon tipplers, coal handling plant-fuel unloading, ggsstp, roopnagar.
Agency / Dept :
ministry of power
Due Date :
Jul 22, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Fabrication Of Chute. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Fabrication Of Chute sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Fabrication Of Chute Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Fabrication Of Chute, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Fabrication Of Chute Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Fabrication Of Chute Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Fabrication Of Chute.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Fabrication Of Chute depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Fabrication Of Chute Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Fabrication Of Chute bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Fabrication Of Chute. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Fabrication Of Chute, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Fabrication Of Chute, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Fabrication Of Chute?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Fabrication Of Chute tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Fabrication Of Chute?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Fabrication Of Chute, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Fabrication Of Chute is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All