sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

65Latest Electrical resistors Tenders List

Latest Electrical resistors Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Electrical resistors tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Electrical resistors tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Electrical resistors Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Electrical resistors tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Electrical resistors Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Electrical resistors Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Electrical resistors Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Electrical resistors tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Electrical resistors Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Electrical resistors sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Electrical resistors tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Electrical resistors tenders.

Is EMD mandatory for all Electrical resistors tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Electrical resistors work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Electrical resistors tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Electrical resistors Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17779613
Location : budgam , jammu & kashmir
Source : GEM Tenders
NEW TENDER
corrigendum tender for training infrastructure charges for skill devp classes , trainer honorarium , instructor honorarium , counsellor / mobilizer honorarium , led assembly tool kits (soldering iron, desolder pump, etc) , led components & raw material (led chips, drivers, pcb, mcpcb, capacitors, resistors, holders, wires , testing equipment (digital multimeter, led tester, dc power supply, etc) , electrical safety equipment & fire safety kit , uniform & stationery kits for trainees , assessment & certification fee
Agency / Dept :
indian army
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
3.5L
View Documents
T18 Ref No : 17460440
Location : mangrol , gujarat
Source : GEM Tenders
LIVE TENDER
tender for primary current injection set , pvc pipe bending machine , multifunction meter , bldc motor with controller , servo motor with resolver , pmsm with controller , mppt based charge controller , digital timer , impulse relay , dusk and dawn switch , twisted pair non metallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable multi conductor cable coaxial cable direct buried cable optical fiber cable , starter motor axial type , starter motor pre engagement type , starter motor construction of axial type , meter reading instrument mri , various electronic components resistors diode transistor ujt fet scr diac traic igbt small transformer , dmx controller , rewinding machine , multi scan tool , capacitors electrolytic ceramic polyester film variable dual run, electrical equipment and machinary, 220v 50 hz 1 phase output current 200 a min with timer, 19 mm to 25 mm, measurement specificationssystem compatibility supports 3phase 4wire 3phase 3wire 1phase 2wire and 2phase 3wire configurations voltage range 11v to 300v ac, 200w, 10 n m, 1 hp, compatible for 12v 24v 36v 48v battery bank auto detection and self setting of battery bank, on delay and off delay 230v, 16 a 230 v, twisted pair non metallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable multi conductor cable coaxial cable direct buried cable optical fiber cable, starter motor axial type, starter motor pre engagement type, starter motor construction of axial type, meter reading instrument mri, various electronic components resistors diode transistor ujt fet scr diac traic igbt small transformer, dmx controller, fan coil rewinding machine, multi scan tool, capacitors electrolytic ceramic polyester film variable dual run
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
3.2L
View Documents
T18 Ref No : 17682347
Location : agra , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for z1-5962-669702 microcircuit linear type lmc 662 a oblique m , z1-5910-421184 capacitor fixed ceramic dielectric chip type 2700 pf plus 5 percentage 50vdc , z1-5950-040520 coil radio frequency 194 nh plus 20 percentage at 25 mhz point 6 turns , z1-5340-182169 bracket mounting antenna bracket assy , z1-5905-154859 resistor fixed film chip type 220 k ohmsplus 5 percentage 0 point 1w , z1-5950- 040522 coil radio frequency 116nh plus 20 percentage at 25 mhz point 4 turns , z1-misc-4002-710-001-32 resistor cfgp ieplus minus 5 percentage 2w leaded , z7- israel6406-3042-00 eye piece rubber , z7-bel-1700-002- 674-69 cleaning set , z7-5999-720091679-harness electrical battery charger no i , z3-misc-2400-242-601-73 lamp extractor, boq bid, z1/5962-669702, microcircuit linear type lmc 662 a oblique m, z1/5910-421184, capacitor fixed ceramic dielectric chip type 2700 pf +_5 percentage 50vdc, z1/5950-040520, coil radio frequency 194 nh+_20 percentage at 25 mhz point 6 turns, z1/5340-182169, bracket mounting antenna bracket assy, z1/5905-154859, resistor fixed film chip type 220 k ohms+_ 5 percentage 0 point 1w, z1/5950-040522, coil radio frequency 116nh+_20 percentage at 25 mhz point 4 turns, z1/misc-4002-710-001-32, resistor cfgp ie plus minus 5 percentage 2w leaded, z7/israel6406-3042-00, eye piece rubber, z7/bel-1700-002-674-69, cleaning set, z7/5999-720091679-harness electrical battery charger no i, z3/misc-2400-242-601-73, lamp extractor
Agency / Dept :
indian army
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17658809
Location : bhanvad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for frequency meter digital , electrical load set of incandescent lamp tube light cfl led , array junction box for connecting 250w x 4 nos. solar panel , electrical wiring and switch gear rack , discrete component trainer , protective relays and contactors rack, electrical and electronics items, frequency meter digital suitable for armature motor rewinding and electrical testing laboratories. measuring range 20 hz to 99.9 hz. suitable for standard 50 hz and 60 hz ac power supply. high brightness 3 digit or 4 digit red led display. operating voltage 110 v to 230 v ac at 50 hz. accuracy 0.1 hz. display resolution 0.01 hz or 0.1 hz. panel mounting type. panel cutout size 96 mm x 96 mm or 48 mm x 96 mm. durable abs plastic or polycarbonate enclosure., electric load set of incandescent lamp 100 watt 10 pieces, tube light-40 watt 10 pieces, cfl-10 watt 10 pieces, led light 9 watt 10pieces, with dc fuse, dc mcb, and surge suppressor protection, the setup shall consist of electrical control elements suitable for practicing control circuits using banana plugs and sockets for easy and safe connections. the panel board shall be fabricated using a sturdy 40 mm x 40 mm aluminum conveyor frame, incorporating a main input panel with provisions for connecting two bulbs, tube light, ac fan, digital ammeter, voltmeter, energy meter, intermediate switch & house bell wiring. the assembly shall be mounted on a mild steel table, topped with 18 mm ply glossy finished with a durable laminate surface & all 4 sides shall be fitted with a pvc edge band for added protection and an aesthetically clean finish., technical specifications fixed dc power supply ic regulated +5v dc and +/-12v dc 250ma. variable dc power supply ic regulated 0-5v dc and 0-12v dc 250ma. ac power supply 15-0-15v ac 250ma. operated on mains power 230v 50hz plus or minus 10 percent. variable resistors 1k 10k and 100k provided on board. 3 pairs of connected 2mm sockets. rectifier diodes 4 nos diode 4007. oa79 germanium diode. zener diodes 3 nos of 5.1v 8.2v and 12v. different values of resistances capacitors and inductors including 2 nos of 10mh. diac db33. scr 2p4m. triac bt136. mosfet irf540. ujt 2n2646. jfet 2n4393. sl100 and sk100 pair. ldr. thermistor. buzzer 1 each and leds 2 nos red and green. 1 buzzer. salient features front panel built with high class insulated printed circuit board sheet with well printed circuits and symbols. instruction manual. connections brought out through 2mm brass sockets. patch cords 2mm. trainer housed in abs plastic cabinet. size of trainer set 12 inch x 8 inch. standard accessories user manual. patchcords. list of experiments 1 pn junction diode v-i characteristics. 2 zener diode v-i characteristics. 3 voltage stabilization of zener diode. 4 led characteristics. 5 resistance in series and parallel. 6 charging and discharging of condenser. 7 lcr resonance circuit. 8 clipping and clamping. 9 half wave full wave and bridge rectifier. 10 common base transistor amplifier. 11 common emitter transistor amplifier. 12 common collector transistor amplifier. 13 rc coupled amplifier. 14 basic logic gates. 15 rc passive filter circuits and many more., the setup shall be suitable for practicing control circuits using banana plugs and sockets. it shall include protector relays operating at a working voltage of 230v ac, with under-voltage settings between 160-220v, over-voltage settings between 230-300v, and a fixed time setting of 2.5 seconds. the panel shall be constructed using a 40 mm x 40 mm aluminum conveyor frame and shall feature a main input panel equipped with a push-button station, an under and over voltage protection relay and a contactor station, with all terminals brought out for trainees to practice wiring exercises. the entire assembly shall be mounted on a mild steel table, topped with 18 mm thick plywood, finished with a durable laminate surface and edged on all four sides with pvc edge banding for protection and a clean appearance.
Agency / Dept :
department of employment and training DET
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
54.2K
View Documents
T18 Ref No : 17663646
Location : bhanvad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for frequency meter digital , electrical load set of incandescent lamp tube light cfl led , array junction box for connecting 250w x 4 nos. solar panel , electrical wiring and switch gear rack , discrete component trainer , protective relays and contactors rack, electrical and electronics items, frequency meter digital suitable for armature motor rewinding and electrical testing laboratories. measuring range 20 hz to 99.9 hz. suitable for standard 50 hz and 60 hz ac power supply. high brightness 3 digit or 4 digit red led display. operating voltage 110 v to 230 v ac at 50 hz. accuracy 0.1 hz. display resolution 0.01 hz or 0.1 hz. panel mounting type. panel cutout size 96 mm x 96 mm or 48 mm x 96 mm. durable abs plastic or polycarbonate enclosure., electric load set of incandescent lamp 100 watt 10 pieces, tube light-40 watt 10 pieces, cfl-10 watt 10 pieces, led light 9 watt 10pieces, with dc fuse, dc mcb, and surge suppressor protection, the setup shall consist of electrical control elements suitable for practicing control circuits using banana plugs and sockets for easy and safe connections. the panel board shall be fabricated using a sturdy 40 mm x 40 mm aluminum conveyor frame, incorporating a main input panel with provisions for connecting two bulbs, tube light, ac fan, digital ammeter, voltmeter, energy meter, intermediate switch & house bell wiring. the assembly shall be mounted on a mild steel table, topped with 18 mm ply glossy finished with a durable laminate surface & all 4 sides shall be fitted with a pvc edge band for added protection and an aesthetically clean finish., technical specifications fixed dc power supply ic regulated +5v dc and +/-12v dc 250ma. variable dc power supply ic regulated 0-5v dc and 0-12v dc 250ma. ac power supply 15-0-15v ac 250ma. operated on mains power 230v 50hz plus or minus 10 percent. variable resistors 1k 10k and 100k provided on board. 3 pairs of connected 2mm sockets. rectifier diodes 4 nos diode 4007. oa79 germanium diode. zener diodes 3 nos of 5.1v 8.2v and 12v. different values of resistances capacitors and inductors including 2 nos of 10mh. diac db33. scr 2p4m. triac bt136. mosfet irf540. ujt 2n2646. jfet 2n4393. sl100 and sk100 pair. ldr. thermistor. buzzer 1 each and leds 2 nos red and green. 1 buzzer. salient features front panel built with high class insulated printed circuit board sheet with well printed circuits and symbols. instruction manual. connections brought out through 2mm brass sockets. patch cords 2mm. trainer housed in abs plastic cabinet. size of trainer set 12 inch x 8 inch. standard accessories user manual. patchcords. list of experiments 1 pn junction diode v-i characteristics. 2 zener diode v-i characteristics. 3 voltage stabilization of zener diode. 4 led characteristics. 5 resistance in series and parallel. 6 charging and discharging of condenser. 7 lcr resonance circuit. 8 clipping and clamping. 9 half wave full wave and bridge rectifier. 10 common base transistor amplifier. 11 common emitter transistor amplifier. 12 common collector transistor amplifier. 13 rc coupled amplifier. 14 basic logic gates. 15 rc passive filter circuits and many more., the setup shall be suitable for practicing control circuits using banana plugs and sockets. it shall include protector relays operating at a working voltage of 230v ac, with under-voltage settings between 160-220v, over-voltage settings between 230-300v, and a fixed time setting of 2.5 seconds. the panel shall be constructed using a 40 mm x 40 mm aluminum conveyor frame and shall feature a main input panel equipped with a push-button station, an under and over voltage protection relay and a contactor station, with all terminals brought out for trainees to practice wiring exercises. the entire assembly shall be mounted on a mild steel table, topped with 18 mm thick plywood, finished with a durable laminate surface and edged on all four sides with pvc edge banding for protection and a clean appearance.
Agency / Dept :
department of employment and training DET
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
54.2K
View Documents
T18 Ref No : 17632565
Location : north 24 paraganas , west bengal
Source : GEM Tenders
LIVE TENDER
tender for oil filter , fuel filter , air filter , fuel water separator assy , electrical fuel pump 12v pier burg type 53 , servomotor with connector dtn04 3p , fuel solenoid valve 12 v , capacitor 60 mf , capacitor 50 uf , temperature sensor , current transformer , oil pressure switch , resistor 100 k ohm 2 0w , terminator resistor , fuel non-return valve , v belt , generator control system x control ggc s , remote control panel x control cp-g , communication cable fischer panda rj45 cat5e 15.0 m , circuit board external , semiconductor relay 42 660 vac 50 , varistor type s 0v complete , sea water strainer, procurement of spare parts for dg set make fischer panda of mechanized boat, part no 30n4000201, part no 0000220, part no 0001864, part no dkfwsa h e, part no 0004105, part no 0011358, part no 0026544, part no 00003870, part no 0000318, part no 0000287, part no 00000317, part no 0000303, part no 0001043, part no 0000311, part no 0003022, part no 0000844, part no md145156, part no 0000292, part no 0000557, part no 0004686, part no 000036, part no 0000315, part no 0000313, part no 56 048
Agency / Dept :
border security force BSF
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
8L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17564440
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for kubernagar boq 2 - ms angle , ms angle , ms pipe dia , ms sheet , msangle , ms channel , ms hollow pipe , ms pipe , ms square bar , ms squarebar , scr testing board circuit with pcb size 120x800065 , csk screw and nut , ma mono plug , marcury chock 125 watt 250v , marcury lamp 125 watt with holder 250volt , side and face cutter , silicon carbide grinding wheel , mercury , metal condut pipe , metal detector loose kit , methanol lab grade , methyl iso butyl ketone , methyl orange indicator , micro 12v soldering and desoldering station , mirror pieces , monitor power adapter , mould realese wax , ms hinges , silver brazing flux , m seal , multimeter kit , silver brazing rod , mythyle orange , nail inch , silver nitrate , network cable tester , network switch 8 port , nikon ac adapter , nikon lithium ion battery , nipple diameter 25mm , npn transistor , nrv , single compression gland 19mm , nut boult 6 mm , nvme 512gb ssd , pvc cable gland 19mm , oil filter , oil filter maruti , oil pump gasket single , on off push button switch , ortho phospheric acid , p clip , p.v.c. foure way connector , p.v.c. pipe 25 mm , paint brush set flat and round , paraffin liquid , patch code , pendant holder , pent clip , petrol pipe , ph paper , phenol lr , phenyle , piping coard , smd componenet diode , plaster of paris , plastic board , plastic bobbin small , smd componenet , se winding wire , se cu wire 36 swg , se cu wire 29 swg , plywood sheet , pnp transistor bc 557 and 558 , poliaster capacitor 0.1 microfarade, 600v , pot 10k , pot 570 ohm , pot 5k , potassium bromate lr , potassium hydroxide , potassium parmangnate , potassium sulphate lr , pot 1 megaohm , power contactor , power strip with 5mtr cable , pressure guage 800psi with valve , s s flat 50x3 , psychrometric chart pvc sheet , ptc relay , punch down tool for rj-45 keystone jack , pvc round block , pvc t , pvc 1 way gang box , pvc 2 way gang box , pvc 3 way gang box , pvc 4 way gang box , pvc bend 19mm dia , pvc electrical board , pvc casing caping 19mm dia , pvc casing caping 25mm , pvc casing caping all corner , pvc casing caping tee , pvc cotton sleeve , pvc nitrile , pvc pipe , pvc roundblcok , pvc switch board , pvc transperent, full wave rectifier circuit kit, radiator hose pipe for stationary diesel engine with clamp, 5 a, 10e and 1w, 9mm, 38mm, 8x4x swg 22, 8 by 4 swg 24, 8 by 4 swg 28, 1/2 inch, 1/2 inch dia, 25 mm dia, dia 2 mm, gasket packing set for stationary diesel engine, rawl plug, general pupose smd pcb, geomatric set, all shape in 3d, 8 swg, red yellow and white, grinding blade, 250 mm, half wave rectifier circuit kit, 4 mm 5 mm 6 mm, handle for bench vice (metal), 12 inch x12 inch, 4 mm (8 swg), hdmi type a cable, a/f 18 mm, m6 x 16 mm, m8 x 10 mm, hookup wire, 1 inch, 12x12x150, 5/8 by 5/8 by/6, 1/4 by 1/4 by6, lr grade, ic 723, ic 7400, ic 7402, ic 7805, ic 7812, ic 7905, ic 8083, ic at89c51, ic based am receiver loose kit, ic based am transmitter loose kit, ic based fm reciver loose kit, ic based fm transmitter loose kit, ic lm317, ic lm317t, 250v, infrarede motion ditector 360 digree censor, 6 amp, ipa solution pcb cleaner 500 ml, iron powder, 4x2x45 mm, kirchoffs current law circuit with kit, kirchoffs voltage law circuit with kit, rediator cap, 16 amp, 12v 500 ma dc sugar type, 100w 250volt, 200w 250v, 40w 250volt, 6 volt, 60w 250volt, lamp holder pendent type, lan faceplate with io and gangbox, lan switch 8-port, latex nitrile hand gloves, leatheroid paper, 5mm 3w 250v, 5 mm red, dia 3.15mm, litmus paper, 12 volt, 5 volt, low voltage dc servo motor, luxor oil-based paint ink white of tip size 0.5 mm permanent paint markers, 25mm, 40 by 40 by 8 mm, 40 by 40 by 6 mm, 50x03, 50x06, 125 x 55 x 1.6 mm, 40 x 40 x 6 mm, 75 x 40 mm, mc 75 mm, dia 32 mm, dia 50x03mm, dia 50x06mm, 2mm thick 8 by 4 feet, 32 mm, 20 x 20 mm, size 120x80 layout & loose componant placement and practical procedure step by steps papers in gujarati, m3 and 40 mm, 6.35mm to 3.5mm 4 pole, 125 watt/ 250v, 125 watt with holder 250volt, 80x18x27 dia, 300x40x38 mm, mercury, 19 mm, metal detector loose kit, methanol lab grade, methyl iso butyl ketone, methyl orange indicator, 1cm by 1cm, 12v 2a 24w, mould realese wax, 5 inch, silver brazing flux, m seal, multimeter kit, silver brazing rod, mythyle orange, nail 17 by 1 inch, silver nitrate, network cable tester, network switch 8 port, eh 71p, input 100v 240v 50/60 hz output 5v 1a dc, en - el23 3.8v, 1850mah 7.1wh, 25 mm dia., npn transistor bc 547 and 548, nrv 1/4 inch, 19 mm, 6 mm, 512gb, 19mm, oil filter, oil filter maruti, oil pump gasket single, on off push button switch, ortho phospheric acid, p clip, pvc foure way connector, 25 mm, paint brush set flat and round, paraffin liquid, male 2 sided 10 inch length, pendant holder, pent clip, petrol pipe, ph paper, phenol lr, phenyle, piping coard, smd componenet diode, plaster of paris, 10 inch x 12 inch, dia-10mm length 50 mm, asoorted resistor, 23 swg, 36 swg, 29 swg, 3 x 3, pnp transistor bc 557 and 558, 0.1 microfarade, 600v, 10k, 570 ohm, 5k, 1 megaohm, 2no,2nc type 440volt, 5mtr cable, pressure guage 800psi with valve, 50x3 mm, 4 foot x 4foot, ptc relay, punch down tool for rj45 keystone jack, 2.5 inch x1 inch, 3/4 inch, pvc 1 way gang box, pvc 2 way gang box, pvc 3 way gang box, pvc 4 way gang box, 19mm dia, 10 inch x 12 inch 16m, 8 x 6, 12m, 25mm, pvc casing caping all corner, pvc casing caping tee, pvc cotton sleeve, pvc nitrile latex gloves, 6 switch and 5 socket 10x6, pvc transperent sheet, silicon grease, concave and convex
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
2.4L
View Documents
T18 Ref No : 17701924
Location : junagadh , gujarat
Source : GEM Tenders
LIVE TENDER
tender for iti veraval boq electrical group - ammeter 300a by 60a dc with external shunt , auto transformer 15 amps , automatic reverse forward starter , bradawl 150 mm x 6mm square pointed , cable joining clamp , capacitors electrolytic ceramic polyester film variable dual run , coil winding machine manual , conduit pipe bending machine , conduit pipe cutting and threading machines , philips screw driver set of 5 pieces 100mm to 300mm , plier side cutting 200 mm , contactor 3 phase,440 volt,16 a with nc auxiliary contacts , control panel 5 x 3 x 1.55 x 3 x 1.5 feet , crimping tool pliers 7 in 1 , crimping tool for crimping 16 sq mm to 95 sq.mm , cut out relays , digital lux meter lcd read out 0.05 to 7000 lumens with battery. , earth electrode secondary cu strip 20x5mm , earth gi plate 60cm x 60cm x 6mm , flux meter , foot print grip 250 mm , knife double bladed electrician 100 mm , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals 16 amp , lamp cfl 5 watt, 15 watt, 25 watt set , meter reading instrument mri , omx controller , panel accessories cable ducts, ferrules, led indicators, , screw driver set of 5 pieces 100 to 300 mm , wiring accessories including modular and industrial switch gears , transformer single phase 1 k.v.a. 250 by 100 v , insulator egg type including hardware fitting , insulator pin type including hardware fitting , insulator shackle types including hardware fitting , insulator suspension type including hardware fitting , plumb bob 115 grams , rawl punch holder and bits no. 8,10 , rawl punch holder and bits no. 8,10,14,16 , rechargeable battery 6v,7ah , reverse current relays , screw driver insulated 200 mm x 9 mm blade , small crimping tools assorted 10 to 100 mm 5 nos set , solar panels 250 wp , solar street light 12v, 75ah battery, 75 wp solar panel, 12v, 10a , solar traffic light 12v, 75ah battery, 75 wp solar panel, 12v, 10a , solid state solar base single phase energy meter , table for demonstration 2.5 x 1.20 x 0.75 meters , test lamp , under voltage relays , various electronic components , wiring board on stand 3 meters x 1meter, ammeter 300a by 60a dc with external shunt, auto transformer 15 amps, automatic reverse forward starter, bradawl 150 mm x 6mm square pointed, cable joining clamp, capacitors electrolytic ceramic polyester film variable dual run, coil winding machine manual, suitable for 15mm,18mm, 25mm, and 30mm pipe, adjustable for 15 mm to 30 mm, philips screw driver set of 5 pieces 100mm to 300mm, plier side cutting 200 mm, contactor 3 phase,440 volt,16 a with nc auxiliary contacts, control panel 5 x 3 x 1.55 x 3 x 1.5 feet, crimping tool pliers 7 in 1, crimping tool for crimping 16 sq mm to 95 sq.mm, cut out relays, digital lux meter lcd read out 0.05 to 7000 lumens with battery., earth electrode secondary cu strip 20x5mm, earth gi plate 60cm x 60cm x 6mm, flux meter, foot print grip 250 mm, knife double bladed electrician 100 mm, knife switch dpdt fitted with fuse terminals 16 amp, knife switch tpdt fitted with fuse terminals16 amp, lamp cfl 5 watt, 15 watt, 25 watt set, meter reading instrument mri, omx controller, push buttons, rotary switches, timers, relays, mcb, mccb, rccb, etc., screw driver set of 5 pieces 100 to 300 mm, modular frames, back boxes, switches, sockets, plugs, connectors, fuses, conduits pvc and metal wiring channel, fastners, smoke alarm, sunset switch, fan controlles, light dimmers, etc., transformer single phase 1 k.v.a. 250 by 100 v, insulator egg type including hardware fitting, insulator pin type including hardware fitting, insulator shackle types including hardware fitting, insulator suspension type including hardware fitting, plumb bob 115 grams, rawl punch holder and bits no. 8,10, rawl punch holder and bits no. 8,10,14,16, rechargeable battery 6v,7ah, reverse current relays, screw driver insulated 200 mm x 9 mm blade, small crimping tools assorted 10 to 100 mm 5 nos set, solar panels 250 wp, dusk to dawn charge controller, 60 w led lights and 9 m height pole all dismountable, dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable, bidirectional 5 to 30 amops, 240v, table for demonstration 2.5 x 1.20 x 0.75 meters, test lamp, under voltage relays, resistors, diode, transistor, ujt, fet, scr, diac, traic, igbt, small transformer, with 0.5 meter projection on the top
Agency / Dept :
department of employment and training DET
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
5L
View Documents
T18 Ref No : 17720115
Location : sachin , gujarat
Source : GEM Tenders
LIVE TENDER
tender for mechanical electrical ro material - m.s. flate 100x 2mm , inductor , rj 45 , m.s. flate 50x2mm , hook up wire , g.i. sheet , capaitor , prussian blue , soldering paste flux , solder lead roll , capaitor electrolite , chart paper , strait snip , transistor , bent snip , g.i. pipe , resistance , sewing exercise brown paper , galvanized iron square pipe , ujt , gi square pipe , carbon resistor , eraser gel pen , brown paper , m.s. hexagonal bar , addon block , remote controlle switching system for fan and light with remote , bronze electrode , infrared motion detector sensor 360 degree pir , tailor chalk , cotton lace width 1cm , 4 channel led chaser electronics sequencial controller for led , ss electrode , capacitor , ci or copper zinc electrode , brass filler wire , silver brazing filler wire , p.v.c insulated , ms cc filler wire , press button , aluminium filler wire , fusing , hard drawnben cu wire , arc welding cable , bare cu wire , taflon tape , cu lugs , wire insulation tape , xlpe insulated al cable , pvc insulated al armed cable , 1.5 alkline cell , ss sheet , brass sheet , battan holder , copper sheet , gangway one way box , aluminium sheet , round block , dye penetrat testing kit , pvc tee , wooden screw , fan regulator electronic , angle holder 6a , gangbox , diaod , transformer , pcb , solder flux , drill bit , contactor , overload relay 5-8 a , stop push button , start push button , indicating lamp , spiral flexible pvc bend , pvc insulated , fluorecent tibe light with fitting and choke , pvc conduit pipe , rj 45 cable connector , led , led lamp holder with pvc cap , emery paper ruff and smooth , lamp , pvc casing capping , pvc casing capping elbow , pvc junction box , pvc junction box 3 way 19 mm , pvc junction box 4 way 19 mm , pvc elbow 19 mm , arduino uno , jumper wire , active buzzer , mq 2 smoke sensor , lcd display , i2c module , programme cable arduino , hc - sr04 ultrasonic sensor , servo motor , battery with cap, steel flat as per is 2062 grade a thickness - 2mm width -100 mm, 3 mh, transfer rate 1000 base t, steel flat as per is 2062 grade a thickness - 2 mm width -50 mm, pvc insulation single stranded hook up wires in red blue yellow green black color, 25 swg, 100 microfarad 25 v, marking mediya powder, 16 microfarad 16 v, quickfix paste, 474 k 400 v, wire 1.5mm dia , 60/40 tin, 1 microfarad 400v, size 1105 x 720 cm, color white, yellow, green, balrama straight cut aviation snip 10 inch 250 mm, bc 547, metrotools scissors tool right bend left bend aviation tin scissors sheet metal scissors metal cutter, 470 microfarad 50 v, 25 mm dia, 2 k ohm /0.5 w, regular size, size 40x40mm, 2n 2626, size 25x25mm, 100e 0.5 w, fixer erasable pen with magic wipe eraser, gel pen pack of 6 in single pack ink color - blue, 18x45mm, 20 amp clamp connector type 2 way, 22 k ohm 47 k ohm, 150 k ohm 0.5 watt, network connectivity technology infrared maximum range 40 feet pre programmed, dia 3.15, sense range 100 sense distance 8m 22c power supply ac110-240v working temperature 10 to 32c detection range 360, 10 nos per pkt, 1/4 w 82 ohm, width 1cm, white color, module type is running or chaser light controller number of channels 4 control ics ne555 timer cd4017 counter input voltage dc 5v to 12v maximum load current up to 5a total and application dependent, 2.5 mf, 10 mf, dia 1.6, 20 mf, 1 by 18 cu wire, dia 1.6mm, 3 by 20 cu wire, small & medium size, 7 by 20 cu wire, 4 mm dia 8 swg, multicore copper 400/600 amp, 1 mm dia 19 swg, resitape astral ptfe tape, white, 1.5 sq mm, self adhesive pvc electrical insulation tape, 35 sqmm, aluminium armoured 50 sqmm, 1.5 wa, size 50x2 mm, 6a, pvc white, mm 50x2, 2.5 inch x 1, 3 bottele, 3/4inch, 12x5 mm, 25 x5 mm, 45x8 mm, 220-240 v 80 to 100 wcapacity, 3 way 2 switch 1 socket, 2 way 2 switch, 1n4007, 230/6 v 500 ma, 230/6-0-6 v, 4inch x 4inch, suitable for pcb bga pga and smd reworking, 240 v / 14 v, 1 mm 3 mm, 560e 0.5 w, 1k 0.5 w, 16 a, 5-8 a, switch type spst single pole single throw simple onoff functionality electrical ratings 24v operating voltage with a 2a current rating suitable for low voltage applications. build material metal body with plastic actuator durable housing with insulated switching interface color red, switch type spst single pole single throw simple on off functionality electrical ratings 24v operating voltage with a 2a current rating suitable for low voltage applications build material metal body with plastic actuator durable housing with insulated switching interface color green, 100 w 230 v, material polyethylene diameter 6 mm color white, armoured 25 sqmm, 40 w, 20 mm, 3 way 2 switch 2 socket, ethernet cat 6, 5mm 3 v red, 5mm 3 v yellow, 5mm 3 v blue, 5mm 3 v green, 5mm 3 v orange, insulation material polycarbonate ip rating ip20 color white power factor more than 0.95, 1000 grit, 60 w 230 v, 25mm x 10mm, 1 way 19 mm, 2 way 19 mm, 3 way 19 mm, 4 way 19 mm, 19 mm, 19 mm, arduino uno r3 compatible board atmega328p dip version, male to female, male to male, 5 v, operating voltage 5v, 16 x 2, i2c module compatible with 16 x 2 lcd ic chip pcf8574 power supply 5v, compatible with the pc usb type-a to usb type-b length 30.48cm, module 5 v, sg 90 combo kit with jumper wires and mounting screws, 9 volt heavy duty battery
Agency / Dept :
department of employment and training DET
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
80K
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17758929
Location : songadh , gujarat
Source : GEM Tenders
LIVE TENDER
corrigendum tender for lpp 3000g mcrp card suitable for 95 kv dc , 800 ma dc. , capacitor 0.22 mfd 10 percent, 800 v ac paper polystrene dielectric for 95kvp dc , gt 1 2 3 pair overvoltage protector for sparkover voltage 240 360 v dc , capacitor 1.0 mfd 10percent, 800 1000 v across power contactor for 95kvp dc ecp , capacitor 0.1 mfd 10 percent, 250v for relay coils for 95kvp dc ecp panel of hvr , surge circuit resistor for esp xmer 12 ohm 10percent, 200 watts, wire wound non in , resistor r17 r18 for esp system10k ohm 05percent, 25 wattswir , resistor wire wound, vte 22 ohm 10percent,25 watts, type c950511 for esp xmer , capacitor ,2.2 micro f,400 v dc advance make , ct 300 1 1 amp, 2core, 10 va each 1 no-oor air cooled resin cast, ring type, acc , capacitor 10 mfd 10percent 600v , resistors 1.2k plus 5percent 10w , resistors 2k plus 5percent 25w , relay 49qtx type 3r-3-24 for oil temp for hvr transformer , relay 63tx type 3r-3-24 for buchholz for hvr transformer , high voltage rectifier module complete stack for esp hvr transformer , assembly of gt2, gt4 and shr for esp hvr transformer , fixed type shunt resistor 2 ohms, 40watts of high voltage rectiformer , thyristor of transformer rectifier controller bht p55 for esp hvr transformer, lpp 2704g supply of electrical spares for ec panel hvr transformer for esp of 500mw, lpp 3000g mcrp card suitable for 95 kv dc , 800 ma dc., capacitor 0.22 mfd +/- 10%, 800 v ac paper polystrene dielectric for 95kvp (dc), gt-1,2,3 - pair. of overvoltage protector for sparkover voltage 240-360v dc for, capacitor 1.0 mfd+/-10%, 800/1000 v across power contactor for 95kvp (dc) ecp pa, capacitor 0.1 mfd+/-10%, 250v for relay coils for 95kvp (dc) ecp panel of hvr tr, surge circuit resistor for esp xmer 12 ohm +/- 10%, 200 watts, wire wound non in, resistor r17, r18 for esp system10 k ohm + / -- 05%, 25 wattswirw wound resi, resistor - wire wound, vte 22 ohm +/- 10%,25 watts, type - c950511 for esp xmer, capacitor ,2.2 micro f,400 v dc advance make, ct 300 1 1 amp, 2core, 10 va each 1 no-oor air cooled resin cast, ring type, acc, capacitor 10 mfd 10percent 600v, resistors 1.2k plus 5percent 10w, resistors 2k plus 5percent 25w, relay 49qtx type 3r-3-24 for oil temp for hvr transformer, relay 63tx type 3r-3-24 for buchholz for hvr transformer, high voltage rectifier module complete stack for esp hvr transformer, assembly of gt2, gt4 and shr for esp hvr transformer, fixed type shunt resistor 2 ohms, 40watts of high voltage rectiformer, thyristor of transformer rectifier controller bht p55 for esp hvr transformer
Agency / Dept :
gujarat state electricity corporation limited GSECL
Due Date :
Oct 23, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Electrical Resistors. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Electrical Resistors sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Electrical Resistors Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Electrical Resistors, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Electrical Resistors Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Electrical Resistors Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Electrical Resistors.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Electrical Resistors depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Electrical Resistors Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Electrical Resistors bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Electrical Resistors. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Electrical Resistors, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Electrical Resistors, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Electrical Resistors?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Electrical Resistors tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Electrical Resistors?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Electrical Resistors, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Electrical Resistors is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All