sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

9Latest Dry riser Tenders List

Latest Dry riser Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Dry riser tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Dry riser tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Dry riser Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Dry riser tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Dry riser Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Dry riser Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Dry riser Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Dry riser tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Dry riser Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Dry riser sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Dry riser tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Dry riser tenders.

Is EMD mandatory for all Dry riser tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Dry riser work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Dry riser tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Dry riser Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16982827
Location : new delhi , delhi
LIVE TENDER
tender for ids/42650/stone/flt/e8, repair and maintenance of stone work as flooring vineering dry and wet cladding steps riser coping grating and tablets at national war memorial
Agency / Dept :
military engineer services MES
Due Date :
Sep 16, 2026 (16 days left)
Tender Value :
47L
View Documents
T18 Ref No : 16902918
Location : gorakhpur , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for soq1 , soq2 , soq3 , soq4 , soq5 , soq6 , soq7 , soq8 , soq9 , soq10 , soq11 , soq12 , soq13 , soq14 , soq15 , soq16 , soq17 , soq18 , soq19 , soq20 , soq21 , soq22 , soq23 , soq24 , soq25 , soq26 , soq27 , soq28 , soq29 , soq30 , soq31 , soq32 , soq33 , soq34 , soq35 , soq36 , soq37 , soq38 , soq39 , soq40 , soq41 , soq42 , soq43 , soq44, annual repair maintenance and operation of e and m installation at shravasti airport, periodical maintenance and operation of electrical and mechanical installations involving operation, repairs and maintenance, attending to complaints/faults/ breakdowns and taking rectification action, ensuring serviceability/satisfactory working condition of the systems, carrying-out preventive maintenance, maintenance of records/ documents etc. under this contract for shift duty for all 7 days on all working days including saturdays, sundays and holidays as per tender specifications, terms & conditions by providing/engaging following minimum number of man power i/c reliever. a-general duty purpose (a) supervisor- highly skilled - (at the rate 1 no hsk-supervisor per day for general shift for 6 days in a week). b-shift duty purpose (a)electrician-(sk) -3 shifts daily at the rate 01 no. electrician-skilled in each shift. (b)helper (usk) -3 shifts daily at the rate 01 no. helper in each shift. (c)electrician(sk)-2shifts daily for 6 day in a week at the rate 01no electrician in each shift. (d)helper (usk)-2 shifts daily for 6 day in a week at the rate 01 no helper in each shift. total minimum manpower i/c reliever - 12 numbers note-relievers shall do duty of electrician/helper as per site requirement., first year monthly visit of fire technician/service engineer form oem of fda system or from oem authorized dealer for carrying out healthiness check of fda system, attending faults, carrying out preventive maintenance i/c cleaning etc. as required of fire main panel ,repeater panels , detectors , response indicators & mcp of the fda system etc. making replacement of the spare parts/accessories etc. if required for healthiness of the fda system and submission of service report to e-i-c. charges against labour & tools etc. required for attending faults, preventive maintenance, servicing, replacement/installations of spare parts and accessories are included in the item. note 1. this boq item is only labour part. 2. all spare parts/accessories required for healthiness of fda system shall be provided by aai i.e paid to the agency against supply of materials as in extra item based on original tax invoice / supporting documents., second year monthly visit of fire technician/service engineer form oem of fda system or from oem authorized dealer for carrying out healthiness check of fda system, attending faults, carrying out preventive maintenance i/c cleaning etc. as required of fire main panel ,repeater panels , detectors , response indicators & mcp of the fda system etc. making replacement of the spare parts/accessories etc. if required for healthiness of the fda system and submission of service report to e-i-c. charges against labour & tools etc. required for attending faults, preventive maintenance, servicing, replacement/installations of spare parts and accessories are included in the item. note 1. this boq item is only labour part. 2. all spare parts/accessories required for healthiness of fda system shall be provided by aai i.e paid to the agency against supply of materials as in extra item based on original tax invoice / supporting documents., first year monthly visit of technician/service engineer form specialized agency for maintenance & up-keeping of fire extinguishers, fire hydrant/ fire fighting & suppression complete system as installed at shravasti airport inclusive of periodical checking/ testing, servicing, maintaining records and attending any number of break down calls of all fire extinguishers, hydrant valves, hose boxes, pipes, branch pipes, hose reels, hose pipes, nrvs, pipe lines, pressure switches, main mono-block motor pump set , booster/terrace mono block motor pump set, starter panels, pressure gauges, sluice valves/gate valve etc. as detailed in the special conditions of the contract, particular specification etc. complete as required. note- (1)this item is only service/labour part and does not cover material part. all spare parts / accessories required for healthiness of fire fighting system, fire extinguishers (refilling of gas, repair of accessories/ spare parts etc.) shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., second year monthly visit of technician/service engineer form specialized agency for maintenance & up-keeping of fire extinguishers, fire hydrant/ fire fighting & suppression complete system as installed at shravasti airport inclusive of periodical checking/ testing, servicing, maintaining records and attending any number of break down calls of all fire extinguishers, hydrant valves, hose boxes, pipes, branch pipes, hose reels, hose pipes, nrvs, pipe lines, pressure switches, main mono-block motor pump set , booster/terrace mono block motor pump set, starter panels, pressure gauges, sluice valves/gate valve etc. as detailed in the special conditions of the contract, particular specification etc. complete as required. note- (1)this item is only service/labour part and does not cover material part. all spare parts / accessories required for healthiness of fire fighting system, fire extinguishers (refilling of gas, repair of accessories/ spare parts etc.) shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., refilling of abc type 4 kg fire extinguisher, refilling of abc type 6 kg fire extinguisher, refilling of co2 type 4.5 kg fire extinguisher, refilling of co2 type 6.5 kg fire extinguisher, refilling of co2 type 9 kg fire extinguisher, first year servicing/maintenance etc. of schneider electric make 11 kv ht vcb panel (installed in ht panel room -panel type- pix-mv, special repair no. 0221189475/01/1, mfg year 2019 ) having 01 no. vcb ( i.e incoming cum outgoing ) as per oem recommendation by er./technician from oems or by er./technician of authorized dealer of oem. note- 1. servicing/maintenance etc. of existing 11 kv vcb panel to be done by oems recommended tools/kit by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of vcb braeker installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., second year servicing/maintenance etc. of schneider electric make 11 kv ht vcb panel (installed in ht panel room - panel type- pix-mv, special repair no. 0221189475/01/1, mfg year 2019 ) having 01 no. vcb ( i.e incoming cum outgoing ) as per oem recommendation by er./technician from oems or by er./technician of authorized dealer of oem. note- 1. servicing/maintenance etc. of existing 11 kv vcb panel to be done by oems recommended tools/kit by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of vcb braeker installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents, first year testing for healthiness and carrying out calibration of all relays installed in 11kv ht vcb panel (installed in ht panel room- panel type-pix-mv, special repair no. 0221189475/01/1 mfg yr 2019) having 01 no. vcb ( i.e. incoming cum outgoing vcb). note- 1. testing and callibrations to be done by oems recommended callibrated kit, by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of relays installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., second year testing for healthiness and carrying out calibration of all relays installed in 11kv ht vcb panel (installed in ht panel room-panel type- pix-mv, special repair no. 0221189475/01/1 mfg yr 2019) having 01 no. vcb ( i.e. incoming cum outgoing vcb). note- 1. testing and callibrations to be done by oems recommended callibrated kit, by their er./technician or by er./technician of authorized dealer of oem. 2. all spare parts/accessories required for healthiness of relays installed in 11kv ht panel shall be provided by aai i.e paid to the agency against supply of materials/repair of equipment as in extra item on market rate on submission of original tax invoice and supporting documents., first year servicing of abb make, model- air circuit breaker 800 a through oem service engineer / oem authorized service engineer including carrying out of following works racking out & removal of acb from switch board, cleaning all parts for dust deposits foreign particles etc , degreasing the various parts of acb. cleaning all parts with cleaning agents such as crc 2 -26 checking the various settings within the acb of contacts, releases etc , checking the hardware for wear & tear, checking of termination & tightness, checking for all hardwares for its presence, replacement of spares / accessories for defective / worn out items (supply of spares / accessories required for healthiness of acb are in aai scope), regressing of the acb parts as recommended by oem, refixing the acb, testing and observance for normal operation of acb complete as required. (service reports to be submitted in oem letterhead / oem authorize service dealer letter head)., second year servicing of abb make, model-air circuit breaker 800 a through oem service engineer / oem authorised service engineer including carrying out of following works racking out & removal of acb from switch board, cleaning all parts for dust deposits foreign particles etc , degreasing the various parts of acb. cleaning all parts with cleaning agents such as crc 2 -26 checking the various settings within the acb of contacts, releases etc , checking the hardware for wear & tear, checking of termination & tightness, checking for all hardwares for its presence, replacement of spares / accessories for defective / worn out items (supply of spares / accessories required for healthiness of acb are in aai scope), regreasing of the acb parts as recommended by oem, refixing the acb, testing and observance for normal operation of acb complete as required. (service report to be submitted in oem letterhead / oem authorize service dealer letter head)., supply of new transformer oil conforming to is-335 in non-returnable barrel as per requirement., first year bdv testing (pre filtration or after filtration) of transformer oil from cpri or authorized dealer/ specialized agency having calibrated bdv testing kit including oil sample collection charges & submission of original test report on their letter head., second year bdv testing (pre filtration or after filtration) of transformer oil from cpri or authorized dealer/ specialized agency having calibrated bdv testing kit including oil sample collection charges & submission of original test report on their letter head., dehydration and filtration of transformer oil at site on the basis of the report of pre-bdv check., rewinding of ceiling fan/ wall fan/ exhaust fan as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangement for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note- dismantled material / wire shall be property of tenderer/contractor., rewinding of submersible motor-pump of capacity up to 2 hp as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangement for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note- dismantled material / wire shall be property of tenderer/contractor., rewinding of submersible motor-pump of capacity up to 7.5 hp as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangement for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note- dismantled material / wire shall be property of tenderer/contractor., rewinding of mono block motor-pump of capacity up to 10 hp as per original characteristics with super enameled copper wire and e class insulation material, replacement of the worn out bearing etc. as required i/c dismantling, making arrangment for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (to be carried out as & when required). note-dismantled material / wire shall be property of tenderer/contractor., lifting and lowering of submersible pump motor set up to 7.5 hp capacity from the depth upto 400 feet including dismantling of the column pipe, cable etc and re-installation of pump and motor set in the bore well along with all necessary work like providing and fixing of required gasket & nut bolts, and welding & threading of gi pipe and flenge etc as required and making connection to the discharge line after dry revolution test complete as required., first year all inclusive annual comprehensive maintenance contract (aiacmc) of the 1.0 tr/ 1.5 tr / 2.0 tr wall mounted split air-conditioners of different makes at different locations including carrying out quarterly visit for servicing and maintenance of ac units by specialized agency .work includes all repair, maintenance, attending to complaints / faults / breakdowns and taking rectification action, ensuring serviceability/satisfactory working condition of the systems including providing and fixing spares parts like all pcbs, refrigerant pipe, compressors, all type of relays, motors, handset say remote, thermostats, capacitors, selector switches, expansion valve etc. as required at site and as per special condition of the contract. note- a). all plastic parts e.g grill, diffuser, blower(fan blade) & painting is not covered in aiacmc. b). 01 job equal to aiacmc of 1 no split ac (1.0 tr/1.5 /2.0 tr) for 1 year., second year all inclusive annual comprehensive maintenance contract (aiacmc) of the 1.0 tr/ 1.5 tr / 2.0 tr wall mounted split air-conditioners of different makes at different locations including carrying out quarterly visit for servicing and maintenance of ac units by specialized agency .work includes all repair, maintenance, attending to complaints / faults / breakdowns and taking rectification action, ensuring serviceability/satisfactory working condition of the systems including providing and fixing spares parts like all pcbs, refrigerant pipe, compressors, all type of relays, motors, handset say remote, thermostats, capacitors, selector switches, expansion valve etc. as required at site and as per special condition of the contract. note- a). all plastic parts e.g grill, diffuser, blower(fan blade) & painting is not covered in aiacmc. b). 01 job equal to aiacmc of 1 no split ac (1.0 tr/1.5 /2.0 tr) for 1 year., first year all inclusive annual comprehensive maintenance contract (aiacmc) of daikin make variable refrigerant flow (vrf) air conditioning system including carrying out monthly visit for servicing and maintenance of ac units. works includes all repair, maintenance attending to complaints/ faults/breakdowns and taking rectification action, ensuring serviceability/ satisfactory working condition of the systems and providing spares like compressors, motors, all type of relays, all pcbs, handset say remote, thermostats, capacitors, selector switches, expansion valve , float switch and all type of sensors like coil sensor (suction sensor & discharge sensor), air sensor (suction sensor & discharge sensor) etc. as required at site and as per special condition of the contract. note- 1. all plastic parts e.g grill, diffuser, blower (fan blade), drain tray, heat exchange coils, sheet metals parts & painting is not covered in aiacmc. 2. qty- 1 hp shall be measured for aiacmc of 1 hp ac unit for 1 year., second year all inclusive annual comprehensive maintenance contract (aiacmc) of daikin make variable refrigerant flow (vrf) air conditioning system including carrying out monthly visit for servicing and maintenance of ac units. works includes all repair, maintenance attending to complaints/ faults/breakdowns and taking rectification action, ensuring serviceability/ satisfactory working condition of the systems and providing spares like compressors, motors, all type of relays, all pcbs, handset say remote, thermostats, capacitors, selector switches, expansion valve , float switch and all type of sensors like coil sensor (suction sensor & discharge sensor), air sensor (suction sensor & discharge sensor) etc. as required at site and as per special condition of the contract. note- 1. all plastic parts e.g grill, diffuser, blower (fan blade), drain tray, heat exchange coils, sheet metals parts & painting is not covered in aiacmc. 2. qty- 1 hp shall be measured for aiacmc of 1 hp ac unit for 1 year., first year annual inclusive annual comprehensive maintenance contract (aiacmc) of inbuilt water purifier (ro plus uv) having storage capacity of 120 ltr, make- eureka forbes/aqua guard at different locations of shravasti airport. work includes carrying out quarterly visit for preventive maintenance and service of water cooler with ro units by oem or authorized oem service dealer. work includes attending any number of breakdowns complaints/ faults and taking rectification action ensuring serviceability/satisfactory working condition of the systems. works includes refrigerant gas charging and repair/replacement of required consumables or other spares parts like candle, filter,membrane, etc. pcbs, refrigerant pipe/gas, compressors, all type of relays, motors, thermostats, capacitors, solenoid valve etc. through oem or authorized oem service dealer and maintaining records/ documentation as per engineer in charge and as per special condition of the contract. note - 1) 1 job equal to aiacmc of 1 no. water cooler with inbuilt ro for 1 year. 2) in this item, the replacement of consumables like pf candle filter, block filter/carbon & ro membrane are covered only one times in a year., second year annual inclusive annual comprehensive maintenance contract (aiacmc) of inbuilt water purifier (ro plus uv) having storage capacity of 120 ltr, make- eureka forbes/aqua guard at different locations of shravasti airport. work includes carrying out quarterly visit for preventive maintenance and service of water cooler with ro units by oem or authorized oem service dealer. work includes attending any number of breakdowns complaints/ faults and taking rectification action ensuring serviceability/satisfactory working condition of the systems. works includes refrigerant gas charging and repair/replacement of required consumables or other spares parts like candle, filter,membrane, etc. pcbs, refrigerant pipe/gas, compressors, all type of relays, motors, thermostats, capacitors, solenoid valve etc. through oem or authorized oem service dealer and maintaining records/ documentation as per engineer in charge and as per special condition of the contract. note - 1) 1 job equal to aiacmc of 1 no. water cooler with inbuilt ro for 1 year. 2) in this item, the replacement of consumables like pf candle filter, block filter/carbon & ro membrane are covered only one times in a year., replacement of oem recommended, suitable block/carbon filter 10 inch in the inbuilt water purifier of eureka forbes/aqua guard make as and when required., replacement of oem recommended, suitable pf candle filter 10 inch in the inbuilt water purifier of eureka forbes/aqua guard make as and when required., replacement of oem recommended, suitable membrane filter in the inbuilt water purifier of eureka forbes/aqua guard make as and when required., first year annual inclusive annual comprehensive maintenance contract (aiacmc) of existing 01 number of old boom barriers ( length - 6meter, model (essl)- bg-bdc-rl-100) by carrying out half yearly preventive maintenance service, minor repairs, supply and replacement of all spares/electrical, electronic components, motor, pcb card etc. and to attend any number of breakdown calls/complaints/fault as and when required to ensure safe functioning of equipments to the satisfaction of engineer-in -charge, including technical and service support and spares support from oem or his authorized service dealer or any other specialized agency as approved by engineer-in -charge as per scc and technical specifications of the contract., second year annual inclusive annual comprehensive maintenance contract (aiacmc) of existing 01 number of old boom barriers ( length - 6meter, model (essl)- bg-bdc-rl-100) by carrying out half yearly preventive maintenance service, minor repairs, supply and replacement of all spares/electrical, electronic components, motor, pcb card etc. and to attend any number of breakdown calls/complaints/fault as and when required to ensure safe functioning of equipments to the satisfaction of engineer-in -charge, including technical and service support and spares support from oem or his authorized service dealer or any other specialized agency as approved by engineer-in -charge as per scc and technical specifications of the contract., first year re-calibration of available clinometer of ama make from the original equipment manufacturer (oem) for papi calibration, including packing, forwarding, transit insurance, and transportation charges for both dispatch and return at shravasti airport., second year re-calibration of available clinometer of ama make from the original equipment manufacturer (oem) for papi calibration, including packing, forwarding, transit insurance, and transportation charges for both dispatch and return at shravasti airport., first year decoration of terminal building with decorative lights on the occasion of independence day, republic day and any other occasions as decided by eic for 03 days on each occasion on hiring (rental) basis with following type of lights and decoration accessories with provision for operation as per national flag theme (tricolour) / occasion themes for indoor & outdoor use, including supply and installation of lights with suitable mounting arrangements, wiring / cabling, loading, unloading, transportation, dismantling etc. complete as required. (the installation & testing of lighting systems and decoration accessories shall be completed by 0500 pm, one day prior to the occasion). decorative lights shall be led series riser pixel light bright (each riser of approx. 30 feet. length) (tri- colour pattern)., second year decoration of terminal building with decorative lights on the occasion of independence day, republic day and any other occasions as decided by eic for 03 days on each occasion on hiring (rental) basis with following type of lights and decoration accessories with provision for operation as per national flag theme (tricolour) / occasion themes for indoor & outdoor use, including supply and installation of lights with suitable mounting arrangements, wiring / cabling, loading, unloading, transportation, dismantling etc. complete as required. (the installation & testing of lighting systems and decoration accessories shall be completed by 0500 pm, one day prior to the occasion). decorative lights shall be led series riser pixel light bright (each riser of approx. 30 feet. length) (tri- colour pattern)., first year healthiness check of 4kw ccr including , carrying out preventive maintenance , doing servicing , repairing & replacement of spare parts if required complete as required by oem service engineer or specialized/expert service engineer as per approval of e-i-c., second year healthiness check of 4kw ccr including , carrying out preventive maintenance , doing servicing , repairing & replacement of spare parts if required complete as required by oem service engineer or specialized/expert service engineer as per approval of e-i-c., supply of wind cone /wind sock have a length of not less than 12 feet and diameter at larger end of not less than 0.9m as per icao guidelines., dsr work- execution of works as per cpwd carrying out any item of dsr (e&m)-2022 works as per site requirement complete as required for attending repair and maintenance, breakdowns and upkeep of internal and external electrical installations as per direction of engineer-in-charge at all locations under shravasti airport conforming to cpwd general specifications for electrical works part-i (internal) 2013, part-ii (external) 1994 and part -iv (substation) 2013, and also to relevant bis specifications. the bidder shall quote the rate in inr only for the job corresponding to the base rate (rs. 1,00,000 i/c gst as per proposed estimate) and percentage above / below shall be calculated by aai based on quoted rate w.r.t base rate and will be paid as per payment methodology given in annexure- b. for example - if agency desires to quote 5 percentage above on dsr-2022 rates, the rate column shall be filled as rs. 1,05,000.00 i/c gst & if agency desires to quote 5 percentage below on dsr-2022 rates, the rate column shall be filled as rs.95,000.00 i/c gst. note - payment on dsr work shall be paid as per payment methodology given at page no. 211 as annexure-b.
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
1.19Cr
View Documents
T18 Ref No : 16920697
Location : dimapur , nagaland
Source : GEM Tenders
LIVE TENDER
tender for drilling for bore well 150 mm including installation of submersible pump , gi pipe 150 mm , gi pipe 2 inch , submersible pump , starter , ten square mm cable , survey of ground water, construction of borewell at monglenjang village kangpokpi district manipur, bore well drilling diameter 150 mm depth up to 420 ft using dth or rotary drilling machine in all types of soil and rock including bore development installation testing and commissioning of submersible pump complete, gi pipe diameter 150 mm heavy class isi marked suitable for bore well casing complete with coupling total length 420 ft, gi pipe diameter 50 mm heavy class isi marked suitable for submersible pump riser line complete with coupling total length 420 ft, bore well submersible pump capacity 5 hp three phase four hundred fifteen volt fifty hertz suitable for one hundred fifty mm bore well complete with accessories installation testing and commissioning, automatic starter suitable for five hp three phase four hundred fifteen volt with over load protection single phasing protection dry run protection meter and protection devices complete, copper or aluminium cable ten square mm three and half core eleven hundred volt grade suitable for submersible pump complete, hydro geological survey identification of ground water source site inspection survey report and recommendation complete job
Agency / Dept :
indian army
Due Date :
Sep 12, 2026 (12 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15943803
Location : new delhi , delhi
Source : GEM Tenders
tender for renovation work of aicte idea lab providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , supply of esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , supply of pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , supply of ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , supply installation testing and commissioning 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2), as per spacification
Agency / Dept :
department of technical education and training DTET
Due Date :
Jul 08, 2026
Tender Value :
50.32L
View Documents
T18 Ref No : 15792767
Location : varanasi , uttar pradesh
Source : GEM Tenders
tender for o and m with aicmc of hvac and vrv system at varanasi airport title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50, o and m with aicmc of hvac and vrv system at varanasi airport, operation and routine maintenance of water cooled chiller hvac system, 3x500tr i/c ahus and cooling tower, vrv system at various locations inside the terminal building and medical centre, various pumps and other installation of wtp and stp, ro, water coolers and split/tower/window ac units at various locations, water fountains inside the terminal building, ensuring serviceability/ satisfactory working condition of the systems i/c maintenance of records/logbook/ documents etc. on all days i/c saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following min. no. of man power- (a) supervisor (highly skilled) - 01 no. (i.e. 01 no. in general shift on 06 days in every week) (b) ac technician / mechanic (skilled) - 03 nos. (ie 01 no. round the clock on all days in every week for operation of chiller, reliever shall be provided on weekly off). (c) ac technician / mechanic (skilled) - 02 nos. (ie 02 no. in general shift on all days in every week for operation and routine maintenance of r.o., water coolers and split/tower/window ac units at various locations, reliever shall be provided on weekly off). (d) asst. ac mechanic cum operator (semi skilled) - 09 nos. (i.e. 01 no. round the clock for operation of ahu, 01 no. round the clock for operation and maintenance of wtp, 01 no. round the clock for operation of stp on all days in every week, reliever shall be provided on weekly off). (e) asst. ac mechanic cum operator (semi skilled) - 01 no. (i.e. 01 no. in general shift for maintenance of stp, reliever shall be provided on weekly off). (f) helper (unskilled) - 03 nos. (i.e. 01 no. round the clock on all days in every week for hvac, reliever shall be provided on weekly off). (g) helper (unskilled) - 02 nos. (ie 02 no. in general shift on all days in every week for operation and routine maintenance of ro, water coolers and split/tower/window ac units at various locations, reliever shall be provided on weekly off)., operation and routine maintenance of vrv system at ats cum technical block and precision air conditioning system at new mssr building including maintenance of records/logbook/ documents etc. on all days including saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following minimum number of man power - (a) supervisor (highly skilled) - 01 nos. (i.e. 01 no. in general shift on 06 days in every week) (b) ac technician / mechanic (skilled) - 01 nos. (i.e. 01 no. in general shift on all days in every week for operation and routine maintenance of vrv system at ats cum technical block and pac system at new mssr building, reliever shall be provided on weekly off). (c) asst. ac mechanic cum operator (semi skilled) - 06 nos. (i.e. 01 no. round the clock for operation and routine maintenance of vrv system in ats block and 01 no. round the clock for operation and routine maintenance of pac system at new mssr building on all days in every week, reliever shall be provided on weekly off)., operation and routine maintenance of packaged air conditioning system at old mssr building including maintenance of records/logbook/ documents etc. on all days including saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following minimum number of man power - (a) asst. ac mechanic cum operator (semi skilled) - 03 nos. (i.e. 01 no. round the clock for operation and routine maintenance of packaged air conditioning system at old mssr building on all days in every week, reliever shall be provided on weekly off)., annual all inclusive comprehensive maintenance contract of central ac plant (hvac) for 3x500tr (make- mcquay) centrifugal chiller type comprising of 3 no. cooling tower (make- advance) and 1no cooling tower (make- bell) with make-up tank, associated pumps as condenser water pump - 03 no(40hp), primary water pump - 03no (25hp), secondary water pump 12 hr - 03 no. (25hp), secondary water pump 24hr- 03 no. (15hp) with 06 no vfd with secondary pumps, hot water generator of 400kw (01 no) with in build panel for 8 zones , air handling unit (floor mounted) - 19 no. up to 100 tr and min 50tr capacity with 08 no vfds, ceiling suspended air handling unit - 17 no up to 3 to 5 tr with electrical starter panel in each hru 03 no of 4250 cmh, 4675 cmh, 2754 cmh with their electrical panels, ac risers - 82 no. with nozzles with respective ahus, ozone system of 06no of make- ruks canada ltd, electrical panel in plant room p1 , p2 and p3 for the operation of chillers, hot water generator and all associated pumps, water softening plant its electrical panel and pumps. above system complete including chiller pipe line, ac duct, grills diffusers, valves, gas charging, winding of motors, displays, instrumentations etc. complete as required related with hvac system. (the supply of consumable spares as mentioned in item-24 to 27 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive periodical maintenance of daikin make vrv system installed at new atc tower ,technical block and substation having total of 143 nos. vrv indoor units including ductable, high wall and cassette units of different capacities. total of outdoor units clubbed in 3 or 2 units together - 12 sets of total capacity of odu - 492 hp. maintenance work is inclusive of all spares required for repair, maintenance as per manufacturer schedule, servicing including routine preventive maintenance, breakdown maintenance including repair/replacement of compressor, electronic circuit board, mechanical equipment, safety controls and instrumentations, gas charging, fan , fan motors, thermal insulation, drain pumps, remote control console/units etc. ensuring serviceability/ satisfactory working condition of the system, maintenance of recordes/documentation etc. as per tender conditions covered under this contract on all days including saturday,sunday and holiday etc. as required., annual all inclusive comprehensive maintenance contract of 144hp vrv air-conditioning system installed in security hold area and passenger boarding bridge fixed finger (16hp - 09 set outdoor units model no-jrnu160lte5.apune, 4 tr- 16 set cassette type indoor units model number-jrnu48gtma4.apune, 6.3 tr - 04 set ductable type indoor units model number-jrnu76gb8a4.apune, makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed in airlines/aai offices in departure area inside terminal building (20hp - 01 set outdoor units model no- ivrfb-20th, 1.7 tr- 10 set cassette type indoor units model number-vlc-20, makes-bluestar) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. upto 1.5 tr window/split ac, annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares, including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. (2tr split/cassette/tower ac), annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares, including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. (3.0 tr split/tower type ac), annual comprehensive maintenance of water coolers of all type, makes and capacities with providing necessary consumables, spares, compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers wherever connected etc. complete as required., annual comprehensive maintenance of water purifiers of aqua guard make including replacement of all defective components like uv lamp etc. and consumables and carrying out bimonthly servicing at installed position etc. complete as required.(the supply of consumable spares filters as mentioned in item no-40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive maintenance of ro up to 50 liter capacity including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39 and 40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive maintenance of ro above 50 up to 100 liter capacity including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39and40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), all inclusive comprehensive maintenance of 3 units each of 2x8tr capacity packaged air-conditioning plant installed at old mssr building (make - bluestar) including replacing defective components, carrying out preventive and breakdown maintenance like arresting of leakage, topping up of refrigerant gas, lubrication, rewinding/ replacing of all type of motors, repairing/ replacing of compressors, repairing / replacing of electrical components etc and other works required from time to time for proper maintenance of units including maintenance of records as per terms and condition all days including sundays and holidays., annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed at conference room and adjacent offices in terminal building including 2x 10hp outdoor units, 7x 2tr cassette type indoor units, make-daikin including compressor and providing all necessary consumables, refrigerant gas, piping, cabling etc., complete as per site requirement and special conditions and general terms and conditions of contract as required., annual all inclusive comprehensive maintenance contract of 36hp vrv air-conditioning system installed in passenger boarding bridge fixed link ( 1x 18 hp-02 set outdoor units model no-jrun180lls4, 4x 3tr-02set cassette type indoor units model number-rnu36gtna4, makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 40hp vrv air-conditioning system installed in passenger boarding bridge fixed finger (1x 20hp-02 set outdoor units model no-jrun200lls4, 4x 3tr-02set cassette type indoor units model number-jrnu36gtna4 , makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 36hp vrv air-conditioning system installed in new fire station medical centre ( 3x 12 hp outdoor units, model no.-map1206ht8d-xa,cassette type indoor units 9x 2 tr, model no.- mmu-up0241hp-e and 3x1.5 tr, model no.-mmu-up0181hp-e make-toshiba) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of cold storage 40000 btu-02 set (make- bluestar) by providing quarterly visit and any number of break down as and when required including replacing/repairing compressor, condenser coil, temperature controller and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 3 x 15 tr (3 sets each of 01 no. indoor unit and 02 no. outdoor units) floor mounted, bottom discharge, top suction, air cooled dx type crac precision air-conditioning system units installed in new mssr building suitable to maintain equipment room temperature at 18 deg c plus minus 2 deg c (1x 15 tr - 03 set indoor units model no-pdx px054d, 2 no. x 03 set outdoor units model number-hcr-43 , makes-vertiv) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual comprehensive maintenance of drinking water fountain with chilling water fountain one at higher level and another at lower level to match disability compliance make oasis/haws/wae including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39 and 40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), cleaning of the solar module regularly two cycle in a month including minor repairing of tulu pump and monitoring of 600 kwp (500kwp+100kwp)grid connected roof top mounted solar photo voltaic power plant by deploying minimum one number unskilled man power in general shift excluding weekly off including maintaining records as per special conditions of the contract and as per direction of e-i-c. (consumables cleaning material like wiper duster, pvc flexible pipe etc. are to be provided by the agency. the solar module are under warrantee whereas inverter to be maintained by oem. the agency has to liaison with oem for repairing/replacement of defective parts)., supply of spares for hvac not include in cmc item no. 4 (pvc fills 600x300x150mm), supply of spares for hvac not include in cmc item no. 4 (resin 220 na(o) for softener plant), supply of spares for hvac not include in cmc item no. 4 (salt for softener plant), supply of spares for hvac not include in cmc item no. 4 (chlorine for dosing in stp), supply and installation of copper tubing of suitable size up to 3tr split air-conditioning for inlet and outlet of refrigerant gas complete with electrical cabling and insulation etc. complete as required during shifting of existing ac units., supply and installation of 20 mm dia pvc rigid drain pipe i/c all accessories like bends, couplers, tees etc. complete as required during shifting of existing ac units., supply and fixing of insulation of nitrile rubber in existing copper tubing for both inlet and outlet of existing installed air conditioner etc. complete as required during shifting of existing ac units as per direction of eic., dismantling of high wall split type air-conditioning unit, shifting, re-installation, testing and commissioning of capacity up to 3.00 tr air-conditioner units, fixing of existing refrigerant pipe, insulation and existing flexible copper conductor cable between evaporator and condenser units, topping up refrigerant gas etc. complete as required as per direction of eic., rewinding of 10/15 hp motor of submersible pump of (different stages ) different makes as per original size of insulated copper wire, sleeves complete with connection, interconnection etc as required., repairing of 10/15 hp submersible pump and motor (excluding rewinding of motor) of different stages and different makes i/c replacement of bearing bush, neck rings, bowl bush, running sleeve, key full, sand guard complete etc as required., repairing and rewinding of the existing water pump/ sewerage pump motor of capacity 0.75 hp to 3.0 hp by dismantling from its position, transportation to the work shop, bringing back to the airport after repairing and rewinding, reinstallation the same, including testing and make the system in serviceable condition as required., repairing and rewinding of the existing blower motor/ filtered feed pump etc. of capacity 5 hp to 7.5 hp by dismantling from its position, transportation to the work shop, bringing back to the airport after repairing and rewinding and reinstallation the same, including testing and make the system in serviceable condition as required., testing of stp incoming and treated water sample on quarterly basis from reputed govt. lab and submission of test reports as per technical specifications.(rate for each sample), dismantling, removal, lowering, reinstalling, testing and commissioning of submersible pumps of different makes and capacities including arranging of tripod stand, chain pulley block etc. as required., supply of 3.7 kw/ 5.0 hp submersible pump-motor set suitable for discharge 80mm delivery of minimum 250 lpm against static head 45mtr consisting of multistage pumps with suitable motor suitable for operation on 415 volt, 50 hz a/c supply. pumps and motors must be connected with alignment shafts etc. complete as required., supply of shield membrane which is not included in cmc of ro / water purifier / water fountains as mentioned in item no-13,14 and 22 suitable for kent/ aqua guard/oasis/haws/wae up to 100 liter capacity etc. complete as required., supply of carbon / sediment filter which is not included in cmc of ro / water purifier / water fountains as mentioned in item no-12,13,14 and 22 suitable for up to 100 liter capacity etc. complete as required., drinking water potability test quarterly basis as per technical specifications (rate for each sample)., supply of consumable urea for equalization tank of stp., supply of sand for sludge drying bed at stp., repairing/replacement of blower pipe tube at stp with suitable size pipe, elbow,socket and flange complete as required., supply of air blower filter at stp compatible to existing air blower., supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part -ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 300 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part- ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 250 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part-ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 200 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part-ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 150 mm dia, annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed at pm safe house including 2x 10hp outdoor units with 6 x 2 tr, 2 x 1.5 tr and 1 x 1.1 tr high wall type indoor units, make-hitachi including compressor and providing all necessary consumables, refrigerant gas, piping, cabling etc., complete as per site requirement and special conditions and general terms and conditions of contract as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Jul 03, 2026
Tender Value :
2.07Cr
View Documents
T18 Ref No : 16238320
Location : new delhi , delhi
Source : GEM Tenders
corrigendum tender for renovation work of aicte idea lab providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , supply of esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , supply of pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , supply of ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , supply installation testing and commissioning 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2), as per spacification
Agency / Dept :
department of technical education and training DTET
Due Date :
Jul 16, 2026
Tender Value :
50.32L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16170522
Location : new delhi , delhi
Source : GEM Tenders
corrigendum tender for renovation work of aicte idea lab - providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , supply of esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , supply of pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , supply of ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , supply installation testing and commissioning 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2), as per spacification
Agency / Dept :
department of technical education and training DTET
Due Date :
Jul 11, 2026
Tender Value :
50.32L
View Documents
T18 Ref No : 16221666
Location : new delhi , delhi
Source : GEM Tenders
corrigendum tender for renovation work of aicte idea lab providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , supply of esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , supply of pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , supply of ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , supply installation testing and commissioning 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2), as per spacification
Agency / Dept :
department of technical education and training DTET
Due Date :
Jul 13, 2026
Tender Value :
50.32L
View Documents
T18 Ref No : 16311364
Location : vemula , andhra pradesh
Source : GEM Tenders
tender for earth work in excavation , filling available excavated earth excluding rock , position cement concrete , reinforced cementconcrete , foundations footings bases of columns etc , columns lintels beams plinth beams roofs etc , steel reinforcement , brick work with common fly ash bricks , structural steel work riveted , neat cement , painting with synthetic enamel paint , 15 mm cement plaster , 6mm cement plaster , water proofing material , premium acrylic emulsion paint , random rubble masonry , removal of damaged barbed wire fencing , water proofing treatment , rigid pvc rain water pipes , supplying and stacking , ms stays and clamps of 100 mm dia , drain cleaning including removal of muck , surface dressing of the ground , 12 mm cement plaster , removing white or colour wash , wall painting with acrylic emulsion paint , providing and applying white cement , finishing walls with acrylic smooth exterior paint , providing and applying plaster of paris putty , white washing with lime , providing and mixing water proofing material , demolishing stone rubble masonry , demolishing brick work , providing and injecting approved grout , providing and fixing glass panes 4 point 0 mm thick glass , providing and fixing glass panes 5 point 0 mm thick glass , providing and fixing glazing in aluminium door 4 point 0 mm thickness , providing and fixing glazing in aluminium door 5 point 0 mm thickness , 30 mm thick factory , providing and fixing factory made panel pvc door , providing and fixing aluminium work for doors , for shutters of doors windows , providing and fixing isi marked flush door shutters , providing and fixing brass 100mm , providing and fixing aluminium handles , providing and fixing aluminium sliding door , providing and fixing bright finished , providing and fixing ist quality ceramic glazed , providing and laying ceramic glazed floor , providing and fixing white vitreous china , providing and fixing water closet squatting , providing and fixing wash basin , providing and fixing ms holder , removal cleaning collection and stacking of wet dry muck , loading trasportation and unloading of the dried muck , fencing with angle iron post , providing and fixing gi chain link , removal of honey bee , cleaning of septic tank, ancillary civil maintenace works at tummalapalle plant and tailing pond area of ucil tummalapalle, earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth 1 point 5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth at all lead and lift as directed by engineer in charge in all kinds of soil, filling available excavated earth excluding rock in trenches and other areas as required in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering at all lead and lifts as per directions of engineer in charge, providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering at all levels as perdirections of engineer in charge with 1 isto 3 isto 6 1 cement 3 coarse sand 6 graded stoneaggregate 20 mm nominal size including compacting and curing as per specifications and directions of engineer in charge, providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centering shuttering finishing andreinforcement at all levels as per directions of engineer in charge1 isto1 point 5 isto 3 1 cement 1 point 5 coarse sand 3 graded stoneaggregate 20 mm nominal size including compaction curing etc. complete as per directions of engineer in charge, centering and shuttering including strutting propping etc and removalof form as per directions of engineer in charge at all leads and lifta in foundations footings bases of columns etc a in foundations footings bases of columns etc, centering and shuttering including strutting, propping etc and removalof form as per directions of engineer in charge at all leads and lifta in foundations footings bases of columns etc b in superstructure columns lintels beams plinth beams roofs etc, steel reinforcement including straightening cutting bending placing in position and binding all complete at all leads and lift with thermo mechanically treated bars of grade fe 500d or more, brick work with common fly ash bricks of class of approved quality with designation 7 point 5 in cement mortar 1 isto 6 1 cement 6 coarse sand at all levels and lift as per directions of engineer in charge, structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete, neat cement punning, painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per directions of eic, 15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand at all lead and lifts with polymer modified cement mortar including curing cost of all materials labour tools and tackles etc complete as per directions of engineer in charge, 6mm cement plaster of mix 1 isto 3 1 cement 3 fine sand, providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers note per bag of 50 kg cement used in the mix, finishing walls with 100 percentage premium acrylic emulsion paint having voc less than 50 gm per litre and uv resistance as per is 15489 2004 alkali and fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additive new work two or more coats applied 1 point 43 litre per 10 sqm over and including priming coat of exterior primer applied 0 point 90 litre per 10 sqm, random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 isto 6 isto 12 1 cement 6 coarse sand 12graded stone aggregate 20 mm nominal size at all lead and lifts with cement mortar 1 isto 6 1 cement 6 coarse sand including cost of all materials, tools and tackles and labour etc complete as per directions of engineer in charge, removal of damaged barbed wire fencing and replacement with new barbed wire weighing 9 point 38 kg per 100m minimum fitted and fixed gi staples, turn buckles etc complete as per directions of engnieer in charge, grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size, providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion i single socketed pipes 110 mm diameter, supplying and stacking 53 mm to 22 point 4 mm size stone aggregate including cost of materials transportation loading and unloading taxes and royalty charges etc complete as per directions of engineer in charge, providing and fixing ms stays and clamps of 100 mm dia for pipes including necessary screws etc complete as per directions of engineer in charge, drain cleaning including removal of muck sludge solids rubbish etc from drains decant pond and other areas includng cost of all hire charges of machinery labour charges taxes insurance tools and tackles etc. complete as per directions of engineer in charge, surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish lead up to 500m all kinds of soil up to all lead and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, cement plaster with a floating coat of neat cement 12 mm cement plaster finished with a floating coat of neat cement of mix 1isto 4 1 cement 4 fine sand up to all lead and lift including cost of all materials labor tools and tackles taxes royalty charges etc complete as per latest edition of is code specifications and direction of engineer in charge, removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, wall painting with acrylic emulsion paint having voc volatile organic compound content less than 50 grams per litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. two coats including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete including cost of labor tools and tackles taxes etc complete as per direction of engineer inmcharge, finishing walls with acrylic smooth exterior paint of required shade old work one or more coat applied 0 point 90 ltr per 10 sqm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, white washing with lime to give an even shade two or more coats including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and mixing water proofing material in proportion recommended by the manufacturers including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge note per bag of 50kg cement used in the mix, demolishing stone rubble masonry manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3 kilometres lead in cement mortar up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per latest edition of is code specifications and direction of engineer in charge, demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3 kilometres lead in cement mortar including cost of all labor tools and tackles taxes etc complete as per latest edition of is code specifications and direction of engineer in charge, providing and injecting approved grout in proportion recommended by the manufacturer into cracks honey comb area of concrete masonry by suitable gun pump at required pressure including cutting of nipples after curing etc stirrer mixed sbr polymer of approved make modified cement slurry made with shrinkage compensating cement in concrete rcc work including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 4 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 5 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 5 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, 30 mm thick factory made polyvinyl chloride pvc door shutter made of styles and rails of a upvc hollow section of size 60x30 mm and wall thickness 2 mm pluse or minus 0 point 2 mm with inbuilt decorative moulding edging on one side the styles and rails mitred and joint at the corners by means of ms galvanised plastic brackets of size 75x220 mm having wall thickness 1 point 0 mm and stainless steel screws the styles of the shutter reinforced by inserting galvanised ms tube of size 25x20 mm and 1 mmpluse or minus 0 point 1 mm wall thickness the lock rail made up of h section a upvc hollow section of size 100x30 mm and 2 mm pluse or minus 0 point 2 mm wall thickness fixed to the shutter styles by means of plastic galvanised ms u cleats the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm pluse or minus 0 point 1 mm wall thickness the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised ms rod and fastened with nuts and washers complete as per manufacturers specification including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing factory made panel pvc door shutter consisting of frame made out of ms tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top and bottom rails. ms frame shall have a coat of steel primers of approved make and manufacture ms frame covered with 5 mm thick heat moulded pvc c channel of size 30 mm thickness 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick 95 mm wide pvc sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided both side of the panel 10 mm 5 mm x 2 thick 20 mm wide cross pvc sheet be provided as gap insert for top rail and bottom rail paneling of 5 mm thick both side pvc sheet to be fitted in the ms frame welded sealed to the styles and rails with 7 mm 5 mm 2 mm thick x 15 mm wide pvc sheet beading on inner side and joined together with solvent cement adhesive an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc complete as per direction of engineer in charge manufacturers specification and drawing. 30 mm thick plain pvc door shutters including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate z sections and other sections of approved make conforming to is 733 and is 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required epdm rubber neoprene gasket etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing paneling cp brass stainless steel screws all complete as per architectural drawings glazing paneling and dash fasteners to be paid for separately anodised aluminium anodised transparent or dyed to requied shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber neoprene gasket required fittings anodised aluminium anodised transparent or dyed to required shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing isi marked flush door shutters conforming to is 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including isi marked stainless steel butt hinges with necessary screws including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing brass 100mm mortise latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade, with necessary screws etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium sliding door bolts isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade with nuts and screws etc complete of size 300x16 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry 3 point 3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and laying ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in all colours shades except white ivory grey fume red brown laid on 20 mm thick bed of cement mortar1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry 3 point 3kg per sqm including pointing the joints with white cement and matching pigments etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing white vitreous china pedestal type water closet european type wc pan with seat and lid 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required wc pan with isi marked at all leads and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing water closet squatting pan indian type wc pan with 100 mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required with white vitreous china orissa pattern wc pan of size580x440 mm with integral type foot rests including cost of all materials labour tools and tackles etc complete as per specifications and directions of engineer in charge, providing and fixing wash basin with ci brackets 15 mm cp brass pillar taps 32 mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require white vitreous china wash basin size 630x450 mm with 15 mm cp brass pillar taps of approved brand as per instructions including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ms holder bat clamps of approved design to ci or sci rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size and cost of cutting holes and making good the walls etc 100 mm diameter including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removal cleaning collection and stacking of wet dry muck sludge from drains floors and others areas within a lead of 500m by manual means including cost of manpower tools and tackles etc up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per direction of engineer in charge, loading trasportation and unloading of the dried muck obtained from item no 47 above upto a lead of 03 km including cost of transportation manpower tools and tackles etc complete as per directions of engineer in charge tare weight and gross weight of vehicle for each trip of disposal to be taken at ucils wigh bridge for payment 1 cum equal to1 point 6mt shall be taken for calculation purpose care should be taken to avoid any spillage on road up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per direction of engineer in charge, fencing with angle iron post placed at required distance embedded in cement concrete blocks every 15th post last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires of barbed wire weighing 9 point 38 kg per 100 m minimum between the two posts fitted and fixed with gi staples turn buckles etc complete cost of posts struts earth work and concrete work to be paid for separately payment to be made per metre cost of total length of barbed wire used with gi barbed wire including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing gi chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of engineer in charge made of gi wire of dia 4 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removal of honey bee hives including cost of labor tools and tackles etc complete as per direction of engineer incharge, cleaning of septic tank of various of sludge including loading removal of spillage if any and unloading at a safe place of disposal and cleaning with water of spetic tank including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Aug 08, 2026
Tender Value :
44.86L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Dry Riser. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Dry Riser sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Dry Riser Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Dry Riser, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Dry Riser Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Dry Riser Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Dry Riser.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Dry Riser depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Dry Riser Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Dry Riser bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Dry Riser. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Dry Riser, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Dry Riser, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Dry Riser?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Dry Riser tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Dry Riser?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Dry Riser, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Dry Riser is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All