sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

30Latest Display cube Tenders List

Latest Display cube Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Display cube tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Display cube tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Display cube Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Display cube tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Display cube Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Display cube Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Display cube Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Display cube tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Display cube Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Display cube sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Display cube tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Display cube tenders.

Is EMD mandatory for all Display cube tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Display cube work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Display cube tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Display cube Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17664078
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50 , title51 , title52 , title53 , title54 , title55 , title56, procurement of misc items, adjustable foot rest, glass water jug make borosil, cup and saucer set of 06 pieces make borosil, tea coaster set of 06 pieces make borosil, serving tray, borosil glass set of 06 pieces make ikea rico glass 17c and ikea 20ci, quarter plate set of 06 pcs make bone china, water bottle 1 ltr capacity make milton, heavy duty a4 and a3 spiral binding machine binding capacity 400 sheets make dotpot, calculator big 12 digit make casio, calculator small 12 digit make casio, dp 700 punching machine single and double hole make kangaroo, display telephone set for dir make excluzo telpal or panasonic tg3721bx, multi display wall clock model no dc 047 make ajanta, table glass 8 mm 8 by 4 ft long, pad locks make godrej navtal ultra xl plus 14 by 6 lever 75 mm, extension board with 5 sockets make potronics gm3257, number plate for parking as per sample, black sticky window screen filming cover for privacy and security windowsize 65cm by 190 cm as per sample, fossil sticky window screen filming cover for privacy and security window sizes 100cm by 130 cm and 120 cm by 195 cm as per sample, non skid door mat 2 by 3 feet long, non skid door mat 3 by 4 feet long, dustbin plastic 65 ltr with wheels make aristo, dustbin plastic 80 ltr with wheels make aristo, supply and fix afo fire balls 1.3 kg with stand 1.5 kg with 5 yr warranty, professional auxillary subwoofer portable pa system model no eon208p 8 inch 2 way combines 300w powered pa speaker with 8 channel mixer in portable suitcase design for live sound applications make jbl, white board 2 by 3 feet long one side valvet make roger or moris or milan, offrs name plate as per sample, umbrella, single bed mattress for guard man room make sleepwell, water dispenser with hot & cold water with water bottle make voltas, plastic pots or planters, bettery cell 1.5v aa make duracell, bettery cell 1.5v aaa make duracell, battery 9v make duracell, battery for ups, water bottle 20 ltr for water dispenser, call bell, frame for flags, high voltage alkaline battery 23a 12v make gp a23 or v23ga or mn21, uv printed invitation card with cover for ce, table jhalar colour maroon size length 100 feet by width 3 feet and height drop off 2 feet long, pvc table folding make nilkamal size 1520 by 560 by 560 mm, io double point junction with box as per sample, io single point junction with box as per sample, crystal cube with wooden light size 6 by 6 by 10 cm, insect fly killer, d link 24 port giga bit switch model no dgs 1024d, io connector rj 45, maint box for fujifilm photocopier machine, crystal cube with wooden light size 5 by 5 by 8 cm, desert cooler capacity 90 ltr make bajaj, blue star water cooler 60 ltr, room freshner, hdmi cable for 4k uhd 20 mtr, dusting cloth
Agency / Dept :
indian army
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17659241
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50 , title51 , title52 , title53 , title54 , title55 , title56, procurement of misc items, adjustable foot rest, glass water jug make borosil, cup and saucer set of 06 pieces make borosil, tea coaster set of 06 pieces make borosil, serving tray, borosil glass set of 06 pieces make ikea rico glass 17c and ikea 20ci, quarter plate set of 06 pcs make bone china, water bottle 1 ltr capacity make milton, heavy duty a4 and a3 spiral binding machine binding capacity 400 sheets make dotpot, calculator big 12 digit make casio, calculator small 12 digit make casio, dp 700 punching machine single and double hole make kangaroo, display telephone set for dir make excluzo telpal or panasonic tg3721bx, multi display wall clock model no dc 047 make ajanta, table glass 8 mm 8 by 4 ft long, pad locks make godrej navtal ultra xl plus 14 by 6 lever 75 mm, extension board with 5 sockets make potronics gm3257, number plate for parking as per sample, black sticky window screen filming cover for privacy and security windowsize 65cm by 190 cm as per sample, fossil sticky window screen filming cover for privacy and security window sizes 100cm by 130 cm and 120 cm by 195 cm as per sample, non skid door mat 2 by 3 feet long, non skid door mat 3 by 4 feet long, dustbin plastic 65 ltr with wheels make aristo, dustbin plastic 80 ltr with wheels make aristo, supply and fix afo fire balls 1.3 kg with stand 1.5 kg with 5 yr warranty, professional auxillary subwoofer portable pa system model no eon208p 8 inch 2 way combines 300w powered pa speaker with 8 channel mixer in portable suitcase design for live sound applications make jbl, white board 2 by 3 feet long one side valvet make roger or moris or milan, offrs name plate as per sample, umbrella, single bed mattress for guard man room make sleepwell, water dispenser with hot & cold water with water bottle make voltas, plastic pots or planters, bettery cell 1.5v aa make duracell, bettery cell 1.5v aaa make duracell, battery 9v make duracell, battery for ups, water bottle 20 ltr for water dispenser, call bell, frame for flags, high voltage alkaline battery 23a 12v make gp a23 or v23ga or mn21, uv printed invitation card with cover for ce, table jhalar colour maroon size length 100 feet by width 3 feet and height drop off 2 feet long, pvc table folding make nilkamal size 1520 by 560 by 560 mm, io double point junction with box as per sample, io single point junction with box as per sample, crystal cube with wooden light size 6 by 6 by 10 cm, insect fly killer, d link 24 port giga bit switch model no dgs 1024d, io connector rj 45, maint box for fujifilm photocopier machine, crystal cube with wooden light size 5 by 5 by 8 cm, desert cooler capacity 90 ltr make bajaj, blue star water cooler 60 ltr, room freshner, hdmi cable for 4k uhd 20 mtr, dusting cloth
Agency / Dept :
indian army
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17662127
Location : sampatchak , bihar
Source : GEM Tenders
LIVE TENDER
tender for dc-dc buck converter ,switching regulator , dc-dc buck converter with constant voltage and current control , mini breadboard half size solderless , breadboard full size solderless , 20cm male to female jumper wires , 20cm female to female jumper wires , 20cm male to male jumper wires , hook up wire ,single strand , led , comparator , line decoder , multiplexer , decade counter , nand gate ic , and gate ic , or gate ic , exor gate ic , flip flop , hex inverter , nor gate ic , capacitor , inductor , priority encoder , led display , flux , soldering paste , vero board , ic base - narrow , transistor , latch decoder , bridge rectifier , dual jk flip flop , diode , op amp , timer ic , transister , limit switch , adjustable voltage regulator , voltage regulator , 5v 1 channel relay module , 24v 1 channel realy module , 12v 1 channel relay module , relay , soldering lead , variable resistor , potentiometer,preset , slide switch , mini rocker switch 6a 250v 2pin , push button switch , resistor box , capacitor box , battery holder , aaa rechargeable battery , aa rechargeable battery , cell holder , battery , ultrasonic module , pir sensor , ir proximity sensor , dht 11 module , soil moisture sensor module , sensor kit , connector and socket , rocker switch , switch slide mini , alligator crocodile clips , plastic box , plastic box for ics , super gec copper wire , super gec aluminum wire , electronic combo kit , capacitor kit , mark4 v2 10 inch carbon fiber long range fpv drone frame , tarot tl65b01 iron man 650 foldable quad-copter frame , tarot 650 sport quadcopter frame tl65s01 with motorized landing gear , speedybee mario 5 dc o4 advanced version frame , tx15 radio controller ,elrs or m2 , radiomaster zorro elrs radio with rp1 expresslrs 2.4ghz nano receiver , radiomaster rp1 v2 expresslrs 2.4ghz nano receiver , mad motor bsc 3115 fpv 900kv drone motor for 10 inch fpv frame ,tujorc construction of branded , speedybee beestorm 2306.5 pro-1880kv 5 fpv motor , speedybee 2006-1950kv 6s 3.5inch fpv motor , speedybee 1404-4600kv 2.5 inch fpv motor , genx 22.2v 6s 8000mah 40c or 80c premium lipo lithium polymer battery , genx 22.2v 6s 1550mah 95c or 190c premium lipo lithium polymer battery , imax b6-ac b6ac lipo nimh rc battery balance charger , absd lipo battery 11.1v 2200mah 3s 80c , genx 14.8v 4s 5200mah 40c or 80c premium lipo lithium polymer battery , samsung 21700 5000mah inr21700-50s 45a li-ion battery cell , emax eco ii series 2807 3-6s 1300kv brushless motor , hqprop freestyle dp5x4.3x3v2s grey 5 inch ,2cw plus 2ccw poly carbonate for fpv drone , hqprop t90mm tri blade for cinewhoop ,2cw plus 2ccw poly carbonate , gemfan d63 ducted pc 5 blade 1.5mm propellers 4cw plus 4ccw - black , emax blheli series 30a esc with oneshot , 35a 2-5s blheli s 4 in 1 esc , emax d- shot bullet series 20a 2-4s blheli_s esc 3.5g support onshot42 multishot , 60a blheli_s 4in1 3-6s brushless esc , dakefpv blheli s 8s 100a 4-in-1 esc for fpv ,electronic speed controller , speedybee f405 mini bls 35a stack , flight controller , hex cube orange plus with ads-b carrier board , h-flow ,optical flow and distance sensor module , reyax ryuw122_anchor1 uwb anchor with wi-fi , holybro pixhawk 6c mini and pm06-14s and m9n gps combo, product design and development laboratory equipment i, specification of dc-dc buck converter ,switching regulator, specification of dc-dc buck converter with constant voltage and current control, specification of mini breadboard half size solderless, specification of breadboard full size solderless, specification of 20cm male to female jumper wires, specification of 20cm female to female jumper wires, specification of 20cm male to male jumper wires, specification of hook up wire ,single strand, specification of led, specification of comparator, specification of line decoder, specification of multiplexer, specification of decade counter, specification of nand gate ic, specification of and gate ic, specification of or gate ic, specification of exor gate ic, specification of flip flop, specification of hex inverter, specification of nor gate ic, specification of capacitor, specification of inductor, specification of priority encoder, specification of led display, specification of flux, specification of soldering paste, specification of vero board, specification of ic base - narrow, specification of transistor, specification of latch decoder, specification of bridge rectifier, specification of dual jk flip flop, specification of diode, specification of op amp, specification of timer ic, specification of transister, specification of limit switch, specification of adjustable voltage regulator, specification of voltage regulator, specification of 5v 1 channel relay module, specification of 24v 1 channel realy module, specification of 12v 1 channel relay module, specification of relay, specification of soldering lead, specification of variable resistor, specification of potentiometer,preset, specification of slide switch, specification of mini rocker switch 6a 250v 2pin, specification of push button switch, specification of resistor box, specification of capacitor box, specification of battery holder, specification of aaa rechargeable battery, specification of aa rechargeable battery, specification of cell holder, specification of battery, specification of ultrasonic module, specification of pir sensor, specification of ir proximity sensor, specification of dht 11 module, specification of soil moisture sensor module, specification of sensor kit, specification of connector & socket, specification of rocker switch, specification of switch slide mini, specification of alligator crocodile clips, specification of plastic box, specification of plastic box for ics, specification of super gec copper wire, specification of super gec aluminum wire, specification of electronic combo kit, specification of capacitor kit, specification of mark4 v2 10 inch carbon fiber long range fpv drone frame, specification of tarot tl65b01 iron man 650 foldable quad-copter frame, specification of tarot 650 sport quadcopter frame tl65s01 with motorized landing gear, specification of speedybee mario 5 dc o4 advanced version frame, specification of tx15 radio controller ,elrs or m2, specification of radiomaster zorro elrs radio with rp1 expresslrs 2.4ghz nano receiver, specification of radiomaster rp1 v2 expresslrs 2.4ghz nano receiver, specification of mad motor bsc 3115 fpv 900kv drone motor for 10 inch fpv frame ,tujorc construction of branded, specification of speedybee beestorm 2306.5 pro-1880kv 5 fpv motor, specification of speedybee 2006-1950kv 6s 3.5inch fpv motor, specification of speedybee 1404-4600kv 2.5 inch fpv motor, specification of genx 22.2v 6s 8000mah 40c or 80c premium lipo lithium polymer battery, specification of genx 22.2v 6s 1550mah 95c or 190c premium lipo lithium polymer battery, specification of imax b6-ac b6ac lipo nimh rc battery balance charger, specification of absd lipo battery 11.1v 2200mah 3s 80c, specification of genx 14.8v 4s 5200mah 40c or 80c premium lipo lithium polymer battery, specification of samsung 21700 5000mah inr21700-50s 45a li-ion battery cell, specification of emax eco ii series 2807 3-6s 1300kv brushless motor, specification of hqprop freestyle dp5x4.3x3v2s grey 5 inch ,2cw+2ccw poly carbonate for fpv drone, specification of hqprop t90mm tri blade for cinewhoop ,2cw+2ccw poly carbonate, specification of gemfan d63 ducted pc 5 blade 1.5mm propellers 4cw + 4ccw - black, specification of emax blheli series 30a esc with oneshot, specification of 35a 2-5s blheli s 4 in 1 esc, specification of emax d-shot bullet series 20a 2-4s blheli_s esc 3.5g support onshot42 multishot, specification of 60a blheli_s 4in1 3-6s brushless esc, specification of dakefpv blheli s 8s 100a 4-in-1 esc for fpv ,electronic speed controller, specification of speedybee f405 mini bls 35a stack, specification of flight controller, specification of hex cube orange plus with ads-b carrier board, specification of h-flow ,optical flow and distance sensor module, specification of reyax ryuw122_anchor1 uwb anchor with wi-fi, specification of holybro pixhawk 6c mini and pm06-14s and m9n gps combo
Agency / Dept :
national institute of technology NIT
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17758447
Location : kolkata , west bengal
Source : GEM Tenders
LIVE TENDER
tender for furniture em and other tf items - full plate 1 , quarter plate , rice plate , donga 1 , donga 2 , soup bowl with spoon , curry bowl , tea set , cup and saucer , glass water 1 , malemine plate , soft drink glass , glass borosil large , glass water 2 , water jug , crystal glass , ice buckets with tong , ice trays , juice mug , salt pepper set , donga ss , lemon squasher , pressure cooker 1 , pressure cooker 2 , pressure cooker 3 , kadai aluminium , parat ss 1 , parat ss 2 , sauce pan 1 , sauce pan 2 , idli steamer , jarha ss , tea strainer ss , vegetable scrapper ss , potato peeler ss , kitchen knife , pakkad ss , milk container , rice strainer , storage container ss , storage container plastic 1 , storage container plastic 2 , masala box ss , water bottles plastic , gas lighter ss , induction cook top , casserole ss 1 , casserole ss 2 , casserole ss 3 , degchie aluminium 1 , degchie aluminium 2 , glass coaster set of 6 pcs , table fork ss , desert knife ss , table spoon ss , flask 1ltr , full plate 2 , donga with lid , donga without lid , tea coffe machine , food warmer , mixer grinder , toaster , water cooler , water dispenser , microwave oven , ice box plastic , dining table cloth , dustbin small plastic with lid , mosquito repellent maall out or good , fly catcher 230whaving 2 rods , napking holder ss , vegetable basket , bucket plastic 20 ltr , mug plastic 1.5 ltr , bath stool plastic , soap case plastic , bed sheet 1 , bed sheet 2 , bed cover 1 , bed cover 2 , mink blanket 1 , mink blanket 2 , pillow , pillow cover , quilt 1 , quilt 2 , quilt cover 1 , quilt cover 2 , bath towel , hand towel , mattress 1 , mattress 2 , electric extension cord , pen stand , door mat 1 , door mat 2 , flower vase , cloth dryer stand , pad lock , heavy duty crystal glass table dustbin , cloth hanger , wall clock , emergency led , table lamp , room heater , audio visual display equipment 1 , audio visual display equipment 2 , electric kettle , bed side carpet , refrigerator 100 ltrs , telephone instrument , serving tray , cup and saucer bone china , coaster , water flask , cloth peg , clip board , curtain for window doors , study table computer table , bed wooden 1 , bed wooden 2 , bed side table , sofa 1 , sofa 2 , dining table with 4 chairs , luggage rack , dressing mirror with drawer , easy chair , notice board , key holding box , chair plastic , dining table with 6 chairs , artifacts , electric iron , shoe shiner polish machine , fly insect killer , washing machine , paper shredding machine, full plate bone china/ceramic with drdo logo, quarter plate bone china/ceramic with drdo logo, rice plate bone china/ceramic with drdo logo, donga with lid bone china/ceramic with drdo logo, donga without lid bone china/ceramic with drdo logo, soup bowl with spoon and quarter plate with drdo logo, curry bowl bone china/ceramic with drdo monogram white with rim, tea set with six cups & saucer bone china/ceramic with drdo logo, cups & saucer bone china/ceramic with drdo monogram,, glass water borosilicate 350ml capacity,, malemine plate diameter 300 mm, weight not less than 180 grams, soft drink glass borosill small capacity 210 ml,, glass borosil large set of 6 350ml capacity, (set of 6 pcs), glass water borosil 295 ml capacity, (set of 6 pcs), water jug borosilicate with lid of capacity 1500-2000 ml, crystal glass of capacity without lead content all as specified., ice buckets with tong of stainless steal grade 304 capcity 5 ltr, ice tray of 12-18 cube capacity ss304, juice mug nominal capacity of glass 300 ml,, salt pepper bone china/ceramic shaker set white with rim, donga steel of stainless steel grade 304 of capacity 500 ml, lemon squasher stainless steel of size 20x606x4 cm, pressure cooker 7.5 ltrs with lid, stainless steel induction base, pressure cooker 5.0 lts with lid, stainless steel induction base, pressure cooker 3.0 lts cap with lid, stainless steel induction base, kadai aluminium medium dia 15 with two handles, round of 10 mm dia, parat stainless steel large of is 5522/1992, outer diameter of parat 528 mm,, parat stainless steel medium is 5522/1992, sauce pan of 19 cm outer diameter, 8 cm height, bakelite handle, sauce pan of 19 cm outer diameter, 8 cm height, bakelite handle,, idli steamer commercial - number of idli shelf 4, number of door 1, jarha stainless steel grade 304, material-ss as per is 5522/1922, tea strainer stainless steel, inner dia of strainer 80-90 mm,, vegetable scrapper stainless steel scraper 250mm ss, potato peeler stainless steel body and blade material ss, kitchen knife (set of 4 pcs) big plain blade, blade stainless steel 304, pakkad stainless steel having insulation of size 15 cm, milk container stainless steel capacity 5 liter, steel material 304 grade, rice strainer / jhara ss 304, dia 300 mm, depth 100 mm, thickness 0.7 mm, storage container stainless steel cap 20 kg with lid, storage container plastic 2 kg made from high quality food grade plastic, storage container plastic 1 kg made from high quality food grade plastic, masala box stainless steel, grad 304, with lid containing six small bowls, water bottles plastic for refrigerator having capacity 1 ltr, gas lighter stainless steel grade 304, length not less than 300 mm., induction cook top single element induction heater top material of induction, casserole 5 litre ss304, casserole 2 litre ss304, casserole 1 litre ss304, degchie aluminium with lid, inside diameter 80 mm, hard anodized coating, with isi mark, degchie aluminium with lid, inside diameter 80 mm, hard anodized coating, with isi mark, water jug 1.5 ltr capacity with lid and handle ss and strips, glass coaster set of 6 pcs good quality size 4x4 cm, table fork ss 304, over all length 200 mm, 26 mm wide, thickness 1.5 mm, desert knife ss 304,, table spoon ss 304 pressed type, length of spoon 275 mm, flask 1ltr stainless steel/ matellic, material - stainless steel 304 ss, capacity 1000 ml, full plate melamine / melmoware with drdo logo white with rim, quarter plate melamine or melmoware drdo logo white with rim, rice plate melamine or melmoware dia 3.7cm, donga with lid melamine / melmoware with drdo logo, donga without lid melamine / melmoware with drdo logo, soup bowl with spoon quarter plate melamine / melmoware with drdo logo, curry bowl melamine / melmoware of size 15 cm (dia) 6.4 cm height capacity 300 ml, tea coffee machine, type of machine operation mode- automatic,, food warmer hot case ss- heating chamber size 10 ltr, mixer grinder with three jar and juicer, toaster popup 4 slices 2240 w, water cooler blue star 60 ltrs ss304, water dispenser cap 10 ltrs, microwave oven black mirror 28 ltr capacity, ice box plastic fda approved grades of polyethylene material in double wall moulding process, dining table cloth - 152 x152 cm - colour dyed (assorted), gsm 160 gms, dustbin small plastic with lid of stainless steel foot opreated, mosquito repellent machine electric operated all out or good knight with 45 ml liquid bottle, fly catcher 230w, ms body material and having 2 rods covered with iron mesh, napkin holder stainless steel grade 304, veg basket (plastic crate) size of 90x45x45 cm -, bucket plastic 20 ltr, mug plastic 1.5 ltr, bath stool plastic, soap case plastic, bed sheet single (set of two bed sheet two pillow cover) colour white, 100 % cotton, bed sheet double (set of one bed sheet two pillow cover) colour white, 100 % cotton, bed cover single size of 228x160 cm, bed cover double size of 250x228 cm,, mink blanket single size - 230x160 cm , as per bis - variety- no 01 mass - 700 grm per sqm, mink blanket double size - 230x260 cm , as per bis - variaty- no 01 mass - 700 grm per sqm, pillow microfill size 700x400x170mm, body fabric cloth plain weaves polyster, pillow cover of size 750x 450 mm, bleached white, quilt single of size 220x150 cm, quilt double of size 220x240 cm, quilt cover single - quilt cover of single bedding of size 228 cm x 152 cm, quilt cover double - quilt cover cotton for double bed of size 228x240 cm, bath towel large 500-600 gsm, med to higher weight, soft obserbent, hand towel 500-600 gsm, med to higher weight, soft obserbent, mattress single, mattress double, electric extension cord having minimun 3 slot each for 3 pin plug, pen stand - material metal, length of the base 410mm,, door mat welcome for each room size of 100x60 cm, thickness not less than 10-12 mm, door mat coir welcome for each room size of 90x60 cm, flower vase - material glass, shape round, cloth dryer stand alluminium - configuration cloth dryer stand with durable rails, pad lock - nominal size of pad lock 65 mm, minimum shackle diameter 6mm, dining table cloth - 6x6 feet - colour dyed (assorted), gsm 160 gms, heavy duty crystal glass table dustbin small glass crystal glass, cloth hanger set of 6 pcs - cloth hanger of imported wooden cream color, wall clock - dial shape circle, dial size 12-inch, emergency led light 12 w, length 10-12 cm, width 10-12 cm, height 4-6 cm, table lamp lifetime up to 25,000 hour(s) mains power 220-240v, room heater 2000 w heater power settings 2 (1200w, 2000w), audio visual display equipment led 42 inch resolution (pixels)(1920 x 1080) full hd, audio visual display equipment led 55inch resolution (pixels)(1920 x 1080) full hd, electric kettle milton insta electric 1500 stainless steel kettle, silver, 1.5 ltr, bed side carpet length x width 200x100 cm, refrigerator 100 ltrs direct cool refrigerator, telephone instrument single push button with display and hands free two way speaker, serving tray plastic medium cello/ milton, size 420 x 390 mm, cup and saucer bone china/ceramic of 6 pcs with drdo coloured logo set of 6 cups,150 ml cap, coaster good quality size 4x4 cm, water flask 1500 ml double wall vacume insulated technology, material 304 ss, cloth peg (set of 6) napkin cloth white size 50x40cm, mass 170 gm/sqm,, clip board made up by virgin plastic or acrylic of transparent type, curtain for window doors full length with all accessories, study table computer table with chair as approved by engineer-in-charge, bed solid wooden single - wooden single bed of size 1950x950x300 mm, double bed wooden, bed side table - bed side table of size 600 x 450 x 450 mm, sofa single seater - sofa single seated (leatherette) made out of 50 x 30 mm, sofa three seater - backrest cushion material foam, dinning table with 4 chair - dining table of size 1500x1200 x750 mm, luggage rack as approved by engineer-in-charge, dressing mirror with drawer and stool dimension 40d x 76w x 190h cm, easy chair - frame structure material and size 18mm teak wood, notice board - width of board1200 mm,, key holding box - number of doors 1, height x depth x width 750 x 430x 700, chair plastic having cushion with arm, dinning table with 6 nos of chair as per buyer required size - size of 1500x1200 x750 mm, artifacts 150 x 210cm khadi cloth processed with rice starch saw dust tarmid seed, electric iron 1100w, power cord length 2.5 mtr, shoe shiner/ polish machine used for shoe shining/polishing suitability for black shoe and brown shoe,operation mode sensor operated, fly insect killer machine double rod, fly catcher 230w, ms body material, washing machine capacity 10 kg washer with dryer / extractor, paper shredding machine traight cut mode of paper shredding automatic
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
88.71L
View Documents
T18 Ref No : 17759144
Location : kollam , kerala
Source : GEM Tenders
LIVE TENDER
corrigendum tender for quad copter 450 to 500mm class frame kit , brushless motor , esc 40a, 4s , flight controller , propellers 10 by 4.5 inch set , power distribution board, high current , power module , shock absorber set , lipo battery, 4s, 5200mah , radio transmitter and receiver,10 channel , gps and compass module , telemetry kit , wiring, connectors set , lipo battery charger, 4s, balance or multi-port, 450 to 500 mm class quad copter development and assembly kit, carbon fibre or composite quadcopter frame, 450 to 500mm wheelbase, fixed or foldable arm design, integrated fc or pdb mounting deck, frame weight less than or equal to 450g, payload capacity greater than or equal 800 gm., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal 20a, max thrust greater than or equal 1.2kg with 1045 propeller., blheli-compatible esc, continuous current rating 40a, input 4s lipo., 32-bit arm cortex-m7 or better processor, open-source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 10 by 4.5 inch propellers, factory-balanced cw/ccw pair per set, glass-fibre-reinforced nylon construction, adapter included., high current pdb, continuous rating greater than or equal 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input 4s to 6s lipo, regulated 5.3v/3a output to fc, analogue voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 450mm to 500 mm class frame., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., gnss module with integrated compass, update rate greater than or equal to 5hz, uart interface, compatible with listed flight controllers., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 4s to 6s lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 5200mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
2L
View Documents
T18 Ref No : 17759148
Location : kollam , kerala
Source : GEM Tenders
LIVE TENDER
corrigendum tender for quad copter 650 to 700 mm class frame kit , brushless motor , esc 40a, 6s , flight controller, 32-bit arm cortex- m7 class or better , propellers 15 by 5.5 inch, carbon fibre set , power distribution board , high current, 6s with bec , power module , shock absorber set , lipo battery, 6s, 8000mah , radio transmitter and receiver, 10 channel , gps and compass module m9n or equivalent , telemetry kit , wiring, connectors set , lipo battery charger, 6s, balance or multi port, 650 to 700mm class quad copter development and assembly kits, carbon fibre or glass reinforced composite quadcopter frame, 650 to 700 mm class wheelbase, fixed or foldable arm design, integrated mounting deck for flight controller, pdb and battery tray, arm wall thickness greater than or equal to 4mm carbon tube, frame weight less than or equal to 1100 to 1200 g, payload capacity greater than or equal to3kg, includes landing gear., brushless dc outrunner motor, kv rating 350 to 410kv, continuous current handling greater than or equal to 25a, max thrust greater than or equal to 1.5kg on 6s lipo with 15 inch propeller, unit weight 110g to 150g, blheli_32 (or equivalent) firmware esc, continuous current rating 40a (burst greater than or equal to 55a), input 6s lipo, 32-bit arm cortex m7 or better processor, open source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 15 by 5.5 inch carbon fibre reinforced propellers, self locking / quick release type, factory balanced cw/ccw pair per set., pdb rated for 6s input, continuous current handling greater than or equal to 100a, integrated 5v/3a and 12v/2a bec outputs, xt60 input connector, multiple esc output pads., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input up to 6s lipo, regulated 5.3v/3a output to fc, analog voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 650mm to 700 mm class frame., lithium polymer battery, 6s (22.2v nominal, 25.2v fully charged), capacity 8000mah, minimum continuous discharge rate 25c, equipped with an amass xt60 main power connector with balance connector, integral over-charge/discharge protection., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., u blox m9n (or equivalent) gnss module with integrated magnetometer/compass, position update rate greater than or equal to 10hz, uart/i2c interface, integrated led & safety switch pad., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 6s (22.2v) lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 8000mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.
Agency / Dept :
national cadet corps NCC
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
3L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17657290
Location : sampatchak , bihar
Source : GEM Tenders
LIVE TENDER
tender for dc-dc buck converter ,switching regulator , dc-dc buck converter with constant voltage and current control , mini breadboard half size solderless , breadboard full size solderless , 20cm male to female jumper wires , 20cm female to female jumper wires , 20cm male to male jumper wires , hook up wire ,single strand , led , comparator , line decoder , multiplexer , decade counter , nand gate ic , and gate ic , or gate ic , exor gate ic , flip flop , hex inverter , nor gate ic , capacitor , inductor , priority encoder , led display , flux , soldering paste , vero board , ic base - narrow , transistor , latch decoder , bridge rectifier , dual jk flip flop , diode , op amp , timer ic , transister , limit switch , adjustable voltage regulator , voltage regulator , 5v 1 channel relay module , 24v 1 channel realy module , 12v 1 channel relay module , relay , soldering lead , variable resistor , potentiometer,preset , slide switch , mini rocker switch 6a 250v 2pin , push button switch , resistor box , capacitor box , battery holder , aaa rechargeable battery , aa rechargeable battery , cell holder , battery , ultrasonic module , pir sensor , ir proximity sensor , dht 11 module , soil moisture sensor module , sensor kit , connector and socket , rocker switch , switch slide mini , alligator crocodile clips , plastic box , plastic box for ics , super gec copper wire , super gec aluminum wire , electronic combo kit , capacitor kit , mark4 v2 10 inch carbon fiber long range fpv drone frame , tarot tl65b01 iron man 650 foldable quad-copter frame , tarot 650 sport quadcopter frame tl65s01 with motorized landing gear , speedybee mario 5 dc o4 advanced version frame , tx15 radio controller ,elrs or m2 , radiomaster zorro elrs radio with rp1 expresslrs 2.4ghz nano receiver , radiomaster rp1 v2 expresslrs 2.4ghz nano receiver , mad motor bsc 3115 fpv 900kv drone motor for 10 inch fpv frame ,tujorc construction of branded , speedybee beestorm 2306.5 pro-1880kv 5 fpv motor , speedybee 2006-1950kv 6s 3.5inch fpv motor , speedybee 1404-4600kv 2.5 inch fpv motor , genx 22.2v 6s 8000mah 40c or 80c premium lipo lithium polymer battery , genx 22.2v 6s 1550mah 95c or 190c premium lipo lithium polymer battery , imax b6-ac b6ac lipo nimh rc battery balance charger , absd lipo battery 11.1v 2200mah 3s 80c , genx 14.8v 4s 5200mah 40c or 80c premium lipo lithium polymer battery , samsung 21700 5000mah inr21700-50s 45a li-ion battery cell , emax eco ii series 2807 3-6s 1300kv brushless motor , hqprop freestyle dp5x4.3x3v2s grey 5 inch ,2cw plus 2ccw poly carbonate for fpv drone , hqprop t90mm tri blade for cinewhoop ,2cw plus 2ccw poly carbonate , gemfan d63 ducted pc 5 blade 1.5mm propellers 4cw plus 4ccw - black , emax blheli series 30a esc with oneshot , 35a 2-5s blheli s 4 in 1 esc , emax d- shot bullet series 20a 2-4s blheli_s esc 3.5g support onshot42 multishot , 60a blheli_s 4in1 3-6s brushless esc , dakefpv blheli s 8s 100a 4-in-1 esc for fpv ,electronic speed controller , speedybee f405 mini bls 35a stack , flight controller , hex cube orange plus with ads-b carrier board , h-flow ,optical flow and distance sensor module , reyax ryuw122_anchor1 uwb anchor with wi-fi , holybro pixhawk 6c mini and pm06-14s and m9n gps combo, product design and development laboratory equipment i, specification of dc-dc buck converter ,switching regulator, specification of dc-dc buck converter with constant voltage and current control, specification of mini breadboard half size solderless, specification of breadboard full size solderless, specification of 20cm male to female jumper wires, specification of 20cm female to female jumper wires, specification of 20cm male to male jumper wires, specification of hook up wire ,single strand, specification of led, specification of comparator, specification of line decoder, specification of multiplexer, specification of decade counter, specification of nand gate ic, specification of and gate ic, specification of or gate ic, specification of exor gate ic, specification of flip flop, specification of hex inverter, specification of nor gate ic, specification of capacitor, specification of inductor, specification of priority encoder, specification of led display, specification of flux, specification of soldering paste, specification of vero board, specification of ic base - narrow, specification of transistor, specification of latch decoder, specification of bridge rectifier, specification of dual jk flip flop, specification of diode, specification of op amp, specification of timer ic, specification of transister, specification of limit switch, specification of adjustable voltage regulator, specification of voltage regulator, specification of 5v 1 channel relay module, specification of 24v 1 channel realy module, specification of 12v 1 channel relay module, specification of relay, specification of soldering lead, specification of variable resistor, specification of potentiometer,preset, specification of slide switch, specification of mini rocker switch 6a 250v 2pin, specification of push button switch, specification of resistor box, specification of capacitor box, specification of battery holder, specification of aaa rechargeable battery, specification of aa rechargeable battery, specification of cell holder, specification of battery, specification of ultrasonic module, specification of pir sensor, specification of ir proximity sensor, specification of dht 11 module, specification of soil moisture sensor module, specification of sensor kit, specification of connector & socket, specification of rocker switch, specification of switch slide mini, specification of alligator crocodile clips, specification of plastic box, specification of plastic box for ics, specification of super gec copper wire, specification of super gec aluminum wire, specification of electronic combo kit, specification of capacitor kit, specification of mark4 v2 10 inch carbon fiber long range fpv drone frame, specification of tarot tl65b01 iron man 650 foldable quad-copter frame, specification of tarot 650 sport quadcopter frame tl65s01 with motorized landing gear, specification of speedybee mario 5 dc o4 advanced version frame, specification of tx15 radio controller ,elrs or m2, specification of radiomaster zorro elrs radio with rp1 expresslrs 2.4ghz nano receiver, specification of radiomaster rp1 v2 expresslrs 2.4ghz nano receiver, specification of mad motor bsc 3115 fpv 900kv drone motor for 10 inch fpv frame ,tujorc construction of branded, specification of speedybee beestorm 2306.5 pro-1880kv 5 fpv motor, specification of speedybee 2006-1950kv 6s 3.5inch fpv motor, specification of speedybee 1404-4600kv 2.5 inch fpv motor, specification of genx 22.2v 6s 8000mah 40c or 80c premium lipo lithium polymer battery, specification of genx 22.2v 6s 1550mah 95c or 190c premium lipo lithium polymer battery, specification of imax b6-ac b6ac lipo nimh rc battery balance charger, specification of absd lipo battery 11.1v 2200mah 3s 80c, specification of genx 14.8v 4s 5200mah 40c or 80c premium lipo lithium polymer battery, specification of samsung 21700 5000mah inr21700-50s 45a li-ion battery cell, specification of emax eco ii series 2807 3-6s 1300kv brushless motor, specification of hqprop freestyle dp5x4.3x3v2s grey 5 inch ,2cw+2ccw poly carbonate for fpv drone, specification of hqprop t90mm tri blade for cinewhoop ,2cw+2ccw poly carbonate, specification of gemfan d63 ducted pc 5 blade 1.5mm propellers 4cw + 4ccw - black, specification of emax blheli series 30a esc with oneshot, specification of 35a 2-5s blheli s 4 in 1 esc, specification of emax d-shot bullet series 20a 2-4s blheli_s esc 3.5g support onshot42 multishot, specification of 60a blheli_s 4in1 3-6s brushless esc, specification of dakefpv blheli s 8s 100a 4-in-1 esc for fpv ,electronic speed controller, specification of speedybee f405 mini bls 35a stack, specification of flight controller, specification of hex cube orange plus with ads-b carrier board, specification of h-flow ,optical flow and distance sensor module, specification of reyax ryuw122_anchor1 uwb anchor with wi-fi, specification of holybro pixhawk 6c mini and pm06-14s and m9n gps combo
Agency / Dept :
national institute of technology NIT
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17549322
Location : beed , maharashtra
tender for upgradation of existing lamp based display cube to laser based cube lvs system at i&c-1, 250mw, tps, parli v.#, barco led based lvs system cube 2 outline 24.02.2027 00:00:00 installation & commis of 1.000 au lvs cube 3 service from 24.02.2027, installation & commis of barco lvs cube
Agency / Dept :
Maharashtra State Power Generation Company Limited MAHAGENCO
Due Date :
Oct 09, 2026
Tender Value :
23.3L
View Documents
T18 Ref No : 16855117
Location : jodhpur , rajasthan
Source : GEM Tenders
corrigendum tender for single type for tube , swaging tool, punch type , bending spring , pipe cutter miniature for copper tube , pinch of tool, for copper tube, 6mm to 18mm , ratchet spanner ratchet type valve key of 6.4 sq.mm , capillary plug gauge , piercing pliers and reversing valve , spanner double ended 4mm to 17 mm , ring spanner off set 4 mm to 17 mm , wrench adjustable 150 mm , wrench adjustable 200 mm , wrench adjustable 250 mm , valve key with handle , hollo punch to make hole in gasket hole dia , scissor, gasket cutting stainless steel, length 250mm , l-allen key set size 1.5mm to 10 mm , t-allen key , pipe cutter with built in reamer and space for cutter , tube bender lever type 6 mm to 16 mm , spanner double ended 19 mm to 32 mm , pipe wrench size 250mm , lapping plate c.i. 250mm x 200mm x 10 mm , hammer ball peen head weight 450 gm , puller 3 legged with flexible arm 300mm , hand blower portable complete heavy duty minimum 350w , spirit level precision 200mm , tap set with matching drills 3 mm to 16mm , tap set with matching drills , refrigerant cylinder 2.5 kg , heating kit with infrared bulb , plumbing hammer weight 200 gm , cylinder 134 a, capacity 5 kg , torque wernch length 300mm , piercing valve , filler gauge 0.05 mm , four way reversible valve , vernier height gauge 300 mm , tape measuring 2 metre , voltmeter, ac and dc portable precision grade , ammeter, ac and dc portable precision , megger 1000 volts , wattmeter single phase 0-500- 1000watt , multi meter digital type , k.w. meter, 0-500 - 1000 w , service oscillator , c.r.o single beam , c.r.o dual trace and double beam , a.f.o oscillators , pressure gauge digital type , compound gauge, digital type , service man thermometer in case , gas leak detector for halogen gas , electronic leak detector , sling psychro meter mounted , stop watch digital type , verniercalliper 250 mm length , micrometer outside measurement 0 to 25mm , multi meter analogue type , tachometer digital , infra red type , micron vacuum gauge capable of reading up to 20 microns , sensor thermometer digital , fin straightened and fin comb , wire gauge metric and british.steel plate , dial thermometer remote control , anemometer digital type , compressor tester for small hermetic compressor and invertor type compressor , digital thermometer thermometer range , temperature and humidity recorder , instrumentation screw driver set 100 mm , digital weighing machine 0 to 100 kg commercial type , split phase induction motor 1hp, 230 v , bldc motor with controller , idu pulse generation type motor 15watt,230volt a.c , capacitor start induction motor , ac 3 phase motor, 400 and 50 hz2 hp , star delta starter fully automatic up to 5 hp , auto transformer starter for 3 hp , d.o.l. starter for 2 hp , portable air , oxy-acetylene welding set complete cylinders , single door refrigerator185 litre , frost free refrigerator double door 250 liters , frost free refrigerator 250 litre , three door refrigerator inverter type 300 , four door refrigerator side by side , core drill machine , bench drilling machine 20 mm capacity , grinding machine 200mm,3000rpm,double ended 1 hp , evacuating and refrigerant charging station , evacuating and charging station , two stage rotary vacuum pump , dry n2 cylinder 2 stage regulator , window a.c. 1 ton new a.c , window a.c. 1 ton , split a.c 1.5 ton with eco friendly refrigerant , split a.c 1.5 ton , duct able split a.c 1.5 ton , recovery unit with cylinders , decibel meter mearsuring , cassette air conditioner , de scaling pump set, lab of rac trade items, file flat rough double cut, length 200mm, file, half round, fine double cut, length 150 mm, file, round, fine double cut length 150mm, file flat, fine double cut, length 150mm, file square, fine double cut, length 150mm, file triangular fine double cut length 150mm, scriber 150mm, centre punch length 100mm, try square 150 mm, divider spring joint,length 150mm, caliper spring joint inside,length 150mm, caliper odd leg spring joint,length 150mm, hammer ball pein head weight 220 gm, chisel cold flat 150 x10 mm, cold chisel cross cut150 x10 mm, engineers rule 300 mm, tape measuring 10 meters, plier combination 200 mm, pliers long nose 200 mm, pliers flat nose150 mm, line or neon tester 500 volt heavy duty, tweezer 100 mm, surface plate 45 x 45 cm, oil can 500 ml, surface gauge 150 mm, bench vice150 mm jaw, hack saw tubular metal frame adjustable 300mm, snip straight 200 mm, snip sheet metal curved nose 200 mm, anvil with stand, stakes different types 100mm, tin smith 400mm, nylon mallet 500 gm, round punch 3mm,4mm,6mm, portable electrical drill machine 6 mm capacity, screw driver, plastic handle, 6mm, screw driver, plastic handle,6mm, screw driver, plastic handle,10mm, screw driver, plastic handle,10mm tip length 250mm, philips screw driver, screw driver, plastic handle, flat tip 3mm, screw driver, plastic handle, flat tip 3mm tip length 150mm, soldering iron 65 watt, knife double blade electrician150 mm, tong tester, tenon saw, firmer chisel 6,12,25mm, rawal plug tool 6 mm, fire extinguisher, fire buckets 10 litre, spanner d.e. 6-32 mm, ring spanner, 6-32 mm, quick couples, process tube adopter, tong close mouth and pickup 300mm, welding table for gas 1200x760x600, welding table for arc 1200x760 x600, flaring tool set, single type for tube, swaging tool, punch type, bending spring, pipe cutter miniature for copper tube, pinch of tool, for copper tube, 6mm to 18mm, ratchet spanner ratchet type valve key of 6.4 sq.mm, capillary plug gauge, piercing pliers and reversing valve, spanner double ended 4mm to 17 mm, ring spanner off set 4 mm to 17 mm, wrench adjustable 150 mm, wrench adjustable 200 mm, wrench adjustable 250 mm, valve key with handle, hollo punch to make hole in gasket hole dia, scissor, gasket cutting stainless steel, length 250mm, l-allen key set size 1.5mm to 10 mm, t-allen key, pipe cutter with built in reamer and space for cutter, tube bender lever type 6 mm to 16 mm, spanner double ended 19 mm to 32 mm, pipe wrench size 250mm, lapping plate c.i. 250mm x 200mm x 10 mm, hammer ball peen head weight 450 gm, puller 3 legged with flexible arm 300mm, hand blower portable complete heavy duty minimum 350w, spirit level precision 200mm, tap set with matching drills 3 mm to 16mm, tap set with matching drills, refrigerant cylinder 2.5 kg, heating kit with infrared bulb, plumbing hammer weight 200 gm, cylinder 134 a, capacity 5 kg, torque wernch length 300mm, piercing valve, filler gauge 0.05 mm, four way reversible valve, vernier height gauge 300 mm, tape measuring 2 metre, voltmeter, ac and dc portable precision grade, ammeter, ac and dc portable precision, megger 1000 volts, wattmeter single phase 0-500-1000watt, multi meter digital type, k.w. meter, 0-500 -1000 w, service oscillator, c.r.o single beam, c.r.o dual trace and double beam, a.f.o oscillators, pressure gauge digital type, compound gauge, digital type, service man thermometer in case, gas leak detector for halogen gas, electronic leak detector, sling psychro meter mounted, stop watch digital type, verniercalliper 250 mm length, micrometer outside measurement 0 to 25mm, multi meter analogue type, tachometer digital , infra red type, micron vacuum gauge capable of reading up to 20 microns, sensor thermometer digital, fin straightened and fin comb, wire gauge metric and british.steel plate, dial thermometer remote control, anemometer digital type, compressor tester for small hermetic compressor and invertor type compressor, digital thermometer thermometer range, temperature and humidity recorder, instrumentation screw driver set 100 mm, digital weighing machine 0 to 100 kg commercial type, split phase induction motor 1hp, 230 v, bldc motor with controller, idu pulse generation type motor 15watt,230volt a.c, capacitor start induction motor, ac 3 phase motor, 400 and 50 hz2 hp, star delta starter fully automatic up to 5 hp, auto transformer starter for 3 hp, d.o.l. starter for 2 hp, portable air, oxy-acetylene welding set complete cylinders, single door refrigerator185 litre, frost free refrigerator double door 250 liters, frost free refrigerator 250 litre, three door refrigerator inverter type 300, four door refrigerator side by side, core drill machine, bench drilling machine 20 mm capacity, grinding machine 200mm,3000rpm,double ended 1 hp, evacuating and refrigerant charging station, evacuating and charging station, two stage rotary vacuum pump, dry n2 cylinder 2 stage regulator, window a.c. 1 ton new a.c, window a.c. 1 ton, split a.c 1.5 ton with eco friendly refrigerant, split a.c 1.5 ton, duct able split a.c 1.5 ton, recovery unit with cylinders, decibel meter mearsuring, cassette air conditioner, de scaling pump set with stainless steel, fan coil unit, shell and tube, dx chillers small 5 ton, circulating water pump small 0.5 h.p, refrigerant cylinder capacity 10 kg, gauge manifold three way, shell and tube type condenser 5 ton, rotary hermetic compressor new 2 ton, bottle cooler visible inner volume 200 litre, deep freezer inner volume 200 litre, display cabinet 2-ton, water cooler storage type 200 l, water dispenser bubble type hot and cold 2.5 to 3ltr, ice candy plant 2 ton, air-conditioning, direct system, air-conditioning, indirect system, package ac 5 ton, car a. c components, car ac tutorial model, bus ac tutorial model, automatic ice cube, storage type water cooler, visi cooler 200 liter, vrf and vrv unit with two indoor units 2.5tr, split a.c inverter technology 1.5 tr, walk in cooler puf insulated for cold room, absorption system small size, class room student table, work bench 2000 x 1000 x 700 mm, almirah 1950 x 900 x 480 mm, lockers 1950 x 900 x 480, instructor table, instructor chair revolving, computer table, computer chairs, laptop latest version, stool
Agency / Dept :
department of technical education DTE
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16747484
Location : solapur , maharashtra
tender for contract for installation, operation and maintenance of led advertisement cubes/display units on each big pillar (02 big pillars -main entrance area ) in the circulating area of solapur railway station for display of advertisement for a period of 05 years.
Agency / Dept :
central railway CR
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Display Cube. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Display Cube sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Display Cube Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Display Cube, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Display Cube Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Display Cube Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Display Cube.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Display Cube depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Display Cube Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Display Cube bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Display Cube. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Display Cube, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Display Cube, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Display Cube?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Display Cube tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Display Cube?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Display Cube, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Display Cube is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All