sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

87Latest Cast iron cap Tenders List

Latest Cast iron cap Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Cast iron cap tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Cast iron cap tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Cast iron cap Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Cast iron cap tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Cast iron cap Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Cast iron cap Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Cast iron cap Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Cast iron cap tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Cast iron cap Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Cast iron cap sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Cast iron cap tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Cast iron cap tenders.

Is EMD mandatory for all Cast iron cap tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Cast iron cap work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Cast iron cap tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Cast iron cap Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17444285
Location : nashik , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for item no 1 , item no 2 , item no 2a , item no 2b , item no 3 , item no 4 , item no 5 , item no 6 , item no 7 , item no 8, designing (aesthetically), and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6 m c/c for esrs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder, c.i. manhole frame and covers, ater level indicators, lighteningconductor, g.i. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, m.s. grill gate of 2 m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per i.s. code. the job to include painting the name of the scheme and other details on the reservoir as per the directions of engineer-in-charge rcc tank- of 75000 litres capacity, providing and supplying isi standard welded di double flanged pipe excluding gst levied by goi & gom in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by engineer -in- charge. (for 2.75 m bare pipe) inlet pipe 100 mm, outlet pipe 100 mm, overflow 100 mm, providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete, providing and supplying isi standard d.i. specials & fittings with sealing rubber gasket of s.b.r.,complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes excluding cost of all labours and materials and transportation to stores / site, loading , unloading excluding all taxes , etc. complete. 80 to 300 mm dia, portable water purifiers or filters,, filter sand, proposed rising main from well to 75,000 litre tank, pure water pumping machinery 7.5 hp (1w+1s) for esr
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Oct 17, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17444304
Location : nashik , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for item no 1 , item no 2 , item no 2a , item no 2b , item no 3 , item no 4 , item no 5 , item no 6 , item no 7 , item no 8, designing (aesthetically), and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6 m c/c for esrs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder, c.i. manhole frame and covers, ater level indicators, lighteningconductor, g.i. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, m.s. grill gate of 2 m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per i.s. code. the job to include painting the name of the scheme and other details on the reservoir as per the directions of engineer-in-charge rcc tank- of 75000 litres capacity, providing and supplying isi standard welded di double flanged pipe excluding gst levied by goi & gom in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by engineer -in- charge. (for 2.75 m bare pipe) inlet pipe 100 mm, outlet pipe 100 mm, overflow 100 mm, providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete, providing and supplying isi standard d.i. specials & fittings with sealing rubber gasket of s.b.r.,complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes excluding cost of all labours and materials and transportation to stores / site, loading , unloading excluding all taxes , etc. complete. 80 to 300 mm dia, portable water purifiers or filters,, filter sand, proposed rising main from well to 75,000 litre tank, pure water pumping machinery 7.5 hp (1w+1s) for esr
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Oct 17, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17632479
Location : alwar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for steel rule , try square , caliper inside , caliper , caliper outside , divider spring , scriber , punch centre , screw driver , chisel cold flat , hammer ball , hammer ball peen , file flat 250 , file half round , hacksaw frame , safety goggles , punch dot , straight edge steel , spirit level , stud extractor , micrometer outside , vernier caliper , vernier height gauge , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , universal scribing , punch letter set , punch number set , portable hand electric drill machine , drill twist straight , taps and dies , file knife edge , file feather , file triangular , file round , file square , feeler gauge , file flat , file swiss , file hand , file card , oil can , plier combination , wooden handle , spanner double ended , spanner adjustable , interchangeable , double ended , glass magnifying , clamp tool maker , c clamp , hand reamer , machine reamer , scraper flat , scraper triangular , scraper half round , chisel cold , drill chuck , pipe wrench , pipe vice , adjustable pipe , wheel dresser , vice machine , sleeve drill morse , vice bench , bench working , black board , wing compass , hammer hand , torque wrench , power tools , different profile , knurling tool , indexable boring bar , temperature gauge , dowel pin , standard tap screws , lapping plate dia 6 , medium carbon heat treated , caps screws , drill gauges , cast iron globe valve , c i sluice gate valve , stop cock , slip on forged steel , pipe threading , pulleys for v belt , v belt and flat belt , packing gasket , washer clutch keys , hollow punch , bearing different , lifting sling , bearing extractor , pulley extractor , trammel , poker , punch prick , mallet , aviation snip straight , flat headed hammer , hammer planishing , snip bent left cut , stake hatchet with leg , stake grooving , gauge slip metric , gauge snap , gauge plug , gauge telescopic , dial test indicator on stand , sine bar , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator , engineer try square , surface roughness comparison plates , carbide wear , lathe tools h s s tipped set , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type , adjustable pipe chain tong , s s and s c centre lathe , drilling machine , welding cable , lugs for cable , earth clamps , welding torch , gas lighter , hammer chipping , gloves leather , leather apron , spindle key , welding torches , welding goggles , welding helmet , tip cleaner , pneumatic trainer kit , hydraulic trainer kit , steel rule 150mm with metric and british graduation, try square 150 mm blade, caliper inside 150mm spring, caliper 150 mm hermaphrodite spring type, caliper outside 150 mm spring, divider spring joint 150 mm, scriber 150mm x 5mm, punch centre 120 mmx10mm, screw driver 150mm x 6mm, chisel cold flat 20mmx150mm, hammer ball peen450 gm 1lb with handle, hammer ball peen 220 gm 1 2 lb with handle, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles, punch dot100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm type, stud extractor ezy out, micrometer outside 0 to 25 mm, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, universal scribing block 220 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 12 mm by 0 5 mm, taps and dies complete set in a box b s w whitworth, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, feeler gauge, file triangular 200 mm second cut, file flat 300 mm second cut safe edge, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, spanner double ended, spanner adjustable, interchangeable ratchet socket, double ended tubular box spannerr, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c clamp 100 mm, c clamp 200 mm, hand reamer set taper pin straight flute, machine reamer parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b s p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, black board with easel, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg with handle, torque wrench, power tools for fastening capacity, different profile gauges plate type for demonstration, knurling tool diamond straight and diagonal, indexable boring bar with inserts, temperature gauge range 0 150, dowel pin, standard tap screws, lapping plate dia 6, medium carbon heat treated alloy steel metric studs and bolts, caps screws, drill gauges, cast iron globe valve flanged type, c i sluice gate valve flanged type, stop cock, slip on forged steel flange, pipe threading die with handle, pulleys for v belt or flat belt, v belt and flat belt, packing gasket, washer clutch keys jib cotterand circlip, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel, poker, punch prick, mallet, aviation snip straight, flat headed hammer with handle, hammer planishing, snip bent left cut, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go, gauge plug single ended, gauge telescopic, dial test indicator on stand, sine bar, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator s gauge dial indication, engineer s try square knife edge, surface roughness comparison plates, vernier bevel protractor, carbide wear block 1 mm 2 mm, lathe tools h s s tipped set, lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type, adjustable pipe chain tong, spanner adjustable, s s and s c centre lathe all geared, drilling machine, welding cable, lugs for cable, earth clamps, welding torch tips of different sizes, gas lighter, hammer chipping 300 gm, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet with colored flame retardent glass, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
21.02L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17614227
Location : jagdalpur , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for 1 head assembly , 2 handle assembly , 3 cylinder assembly , 4 upper valve assembly , 5 lower valve assembly , 6 head-standard , 7 handle standard , 8 telescopic stand , 9 normal stand , 10 water tank , 11 plunger rod , 12 handle axle , 13 third plate , 14 connecting rod , 15 socket seamless , 16 bearing , 17 hexagonal coupler m 12x1.75x50 , 18 hex. bolt m 12x1.75x40 , 19 hex. bolt m 12x2.0 , 20 hex. nut m 12x1.75 , 21 h.t. bolt m 10x1.75x40 , 22 nylock nut m 10x1.5 , 23 chain with coupling , 24 axle washer , 25 reducer cap , 26 cast iron cylinder body , 27 brass liner-short , 28 plunger yoke body , 29 plunger upper valve , 30 bucket spacer , 31 follower , 32 check valve , 33 check valve seat , 34 rubber seat retainer , 35 pump bucket , 36 sealing ring , 37 seating for upper valve , 38 seating for lower valve, head assembly as per atc prapatra s.no.1 for 07 consignees, handle assembly as per atc prapatra s.no.2 for 07 consignees, cylinder assembly as per atc prapatra s.no.3 for 07 consignees, upper valve assembly as per atc prapatra s.no.4 for 07 consignees, lower valve assembly as per atc prapatra s.no.5 for 07 consignees, head-standard as per atc prapatra s.no.6 for 07 consignees, handle standard as per atc prapatra s.no.7 for 07 consignees, telescopic stand standard as per atc prapatra s.no.8 for 07 consignees, normal stand standard as per atc prapatra s.no.9 for 07 consignees, water tank 32 as per atc prapatra s.no.10 for 07 consignees, plunger rod as per atc prapatra s.no.11 for 07 consignees, handle axle as per atc prapatra s.no.12 for 07 consignees, third plate as per atc prapatra s.no.13 for 07 consignees, connecting rod as per atc prapatra s.no.14 for 07 consignees, socket seamless 32 as per atc prapatra s.no.15 for 07 consignees, bearing as per atc prapatra s.no.16 for 07 consignees, hexagonal coupler m 12x1.75x50 as per atc prapatra s.no.17 for 07 consignees, hex. bolt m 12x1.75x40 as per atc prapatra s.no.18 for 07 consignees, hex. bolt m 12x2.0 as per atc prapatra s.no.19 for 07 consignees, hex. nut m 12x1.75 as per atc prapatra s.no.20 for 07 consignees, h.t. bolt m 10x1.75x40 as per atc prapatra s.no. 21 for 07 consignees, nylock nut m 10x1.5 as per atc prapatra s.no.22 for 07 consignees, chain with coupling as per atc prapatra s.no. 23 for 07 consignees, axle washer as per atc prapatra s.no.24 for 07 consignees, reducer cap as per atc prapatra s.no.25 for 07 consignees, brass liner standard as per atc prapatra s.no. 26 for 07 consignees, brass liner-short as per atc prapatra s.no. 27 for 07 consignees, plunger yoke body as per atc prapatra s.no. 28 for 07 consignees, plunger upper valve as per atc prapatra s.no. 29 for 07 consignees, bucket spacer as per atc prapatra s.no. 30 for 07 consignees, follower as per atc prapatra s.no. 31 for 07 consignees, check valve as per atc prapatra s.no.32 for 07 consignees, check valve seat as per atc prapatra s.no. 33 for 07 consignees, rubber seat retainer as per atc prapatra s.no.34 for 07 consignees, pump bucket standard as per atc prapatra s.no.35 for 07 consignees, sealing ring standard as per atc prapatra s.no.36 for 07 consignees, seating for upper valve as per atc prapatra s.no.37 for 07 consignees, seating for lower valve standard as per atc prapatra s.no.38 for 07 consignees
Agency / Dept :
public health engineering department PHED
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
1.03Cr
View Documents
T18 Ref No : 17614239
Location : bilaspur - cg , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for 1 head assembly , 2 handle assembly , 3 cylinder assembly , 4 upper valve assembly , 5 lower valve assembly , 6 head-standard , 7 handle standard , 8 telescopic stand , 9 normal stand , 10 water tank , 11 plunger rod , 12 handle axle , 13 third plate , 14 connecting rod , 15 socket seamless , 16 bearing , 17 hexagonal coupler m 12x1.75x50 , 18 hex. bolt m 12x1.75x40 , 19 hex. bolt m 12x2.0 , 20 hex. nut m 12x1.75 , 21 h.t. bolt m 10x1.75x40 , 22 nylock nut m 10x1.5 , 23 chain with coupling , 24 axle washer , 25 reducer cap , 26 cast iron cylinder body , 27 brass liner-short , 28 plunger yoke body , 29 plunger upper valve , 30 bucket spacer , 31 follower , 32 check valve , 33 check valve seat , 34 rubber seat retainer , 35 pump bucket , 36 sealing ring , 37 seating for upper valve , 38 seating for lower valve, head assembly as per atc prapatra s.no.1 for 14 consignees, handle assembly as per atc prapatra s.no.2 for 14 consignees, cylinder assembly as per atc prapatra s.no.3 for 14 consignees, upper valve assembly as per atc prapatra s.no.4 for 14 consignees, lower valve assembly as per atc prapatra s.no.5 for 14 consignees, head-standard as per atc prapatra s.no.6 for 14 consignees, handle standard as per atc prapatra s.no.7 for 14 consignees, telescopic stand standard as per atc prapatra s.no.8 for 14 consignees, normal stand standard as per atc prapatra s.no.9 for 14 consignees, water tank 32 as per atc prapatra s.no.10 for 14 consignees, plunger rod as per atc prapatra s.no.11 for 14 consignees, handle axle as per atc prapatra s.no.12 for 14 consignees, third plate as per atc prapatra s.no.13 for 14 consignees, connecting rod as per atc prapatra s.no.14 for 14 consignees, socket seamless 32 as per atc prapatra s.no.15 for 14 consignees, bearing as per atc prapatra s.no.16 for 14 consignees, hexagonal coupler m 12x1.75x50 as per atc prapatra s.no.17 for 14 consignees, hex. bolt m 12x1.75x40 as per atc prapatra s.no.18 for 14 consignees, hex. bolt m 12x2.0 as per atc prapatra s.no.19 for 14 consignees, hex. nut m 12x1.75 as per atc prapatra s.no.20 for 14 consignees, h.t. bolt m 10x1.75x40 as per atc prapatra s.no. 21 for 14 consignees, nylock nut m 10x1.5 as per atc prapatra s.no.22 for 14 consignees, chain with coupling as per atc prapatra s.no. 23 for 14 consignees, axle washer as per atc prapatra s.no.24 for 14 consignees, reducer cap as per atc prapatra s.no.25 for 14 consignees, brass liner standard as per atc prapatra s.no. 26 for 14 consignees, brass liner-short as per atc prapatra s.no. 27 for 14 consignees, plunger yoke body as per atc prapatra s.no. 28 for 14 consignees, plunger upper valve as per atc prapatra s.no. 29 for 14 consignees, bucket spacer as per atc prapatra s.no. 30 for 14 consignees, follower as per atc prapatra s.no. 31 for 14 consignees, check valve as per atc prapatra s.no.32 for 14 consignees, check valve seat as per atc prapatra s.no. 33 for 14 consignees, rubber seat retainer as per atc prapatra s.no.34 for 14 consignees, bucket standard as per atc prapatra s.no.35 for 14 consignees, sealing ring standard as per atc prapatra s.no.36 for 14 consignees, seating for upper valve as per atc prapatra s.no.37 for 14 consignees, seating for lower valve standard as per atc prapatra s.no.38 for 14 consignees
Agency / Dept :
public health engineering department PHED
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
1.86Cr
View Documents
T18 Ref No : 17614256
Location : raipur , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for 1 head assembly , 2 handle assembly , 3 cylinder assembly , 4 upper valve assembly , 5 lower valve assembly , 6 head-standard , 7 handle standard , 8 telescopic stand , 9 normal stand , 10 water tank , 11 plunger rod , 12 handle axle , 13 third plate , 14 connecting rod , 15 socket seamless , 16 bearing , 17 hexagonal coupler m 12x1.75x50 , 18 hex. bolt m 12x1.75x40 , 19 hex. bolt m 12x2.0 , 20 hex. nut m 12x1.75 , 21 h.t. bolt m 10x1.75x40 , 22 nylock nut m 10x1.5 , 23 chain with coupling , 24 axle washer , 25 reducer cap , 26 cast iron cylinder body , 27 brass liner-short , 28 plunger yoke body , 29 plunger upper valve , 30 bucket spacer , 31 follower , 32 check valve , 33 check valve seat , 34 rubber seat retainer , 35 pump bucket , 36 sealing ring , 37 seating for upper valve , 38 seating for lower valve, head assembly as per atc prapatra s.no.1 for 12 consignees, handle assembly as per atc prapatra s.no.2 for 12 consignees, cylinder assembly as per atc prapatra s.no.3 for 12 consignees, upper valve assembly as per atc prapatra s.no.4 for 12 consignees, lower valve assembly as per atc prapatra s.no.5 for 12 consignees, head-standard as per atc prapatra s.no.6 for 12 consignees, handle standard as per atc prapatra s.no.7 for 12 consignees, telescopic stand standard as per atc prapatra s.no.8 for 12 consignees, normal stand standard as per atc prapatra s.no.9 for 12 consignees, water tank 32 as per atc prapatra s.no.10 for 12 consignees, plunger rod as per atc prapatra s.no.11 for 12 consignees, handle axle as per atc prapatra s.no.12 for 12 consignees, third plate as per atc prapatra s.no.13 for 12 consignees, connecting rod as per atc prapatra s.no.14 for 12 consignees, socket seamless 32 as per atc prapatra s.no.15 for 12 consignees, bearing as per atc prapatra s.no.16 for 12 consignees, hexagonal coupler m 12x1.75x50 as per atc prapatra s.no.17 for 12 consignees, hex. bolt m 12x1.75x40 as per atc prapatra s.no.18 for 12 consignees, hex. bolt m 12x2.0 as per atc prapatra s.no.19 for 12 consignees, hex. nut m 12x1.75 as per atc prapatra s.no.20 for 12 consignees, h.t. bolt m 10x1.75x40 as per atc prapatra s.no. 21 for 12 consignees, nylock nut m 10x1.5 as per atc prapatra s.no.22 for 12 consignees, chain with coupling as per atc prapatra s.no. 23 for 12 consignees, axle washer as per atc prapatra s.no.24 for 12 consignees, reducer cap as per atc prapatra s.no.25 for 12 consignees, brass liner standard as per atc prapatra s.no. 26 for 12 consignees, brass liner-short as per atc prapatra s.no. 27 for 12 consignees, plunger yoke body as per atc prapatra s.no. 28 for 12 consignees, plunger upper valve as per atc prapatra s.no. 29 for 12 consignees, bucket spacer as per atc prapatra s.no. 30 for 12 consignees, follower as per atc prapatra s.no. 31 for 12 consignees, check valve as per atc prapatra s.no.32 for 12 consignees, check valve seat as per atc prapatra s.no. 33 for 12 consignees, rubber seat retainer as per atc prapatra s.no.34 for 12 consignees, pump bucket standard as per atc prapatra s.no.35 for 12 consignees, sealing ring standard as per atc prapatra s.no.36 for 12 consignees, seating for upper valve as per atc prapatra s.no.37 for 12 consignees, seating for lower valve standard as per atc prapatra s.no.38 for 12 consignees
Agency / Dept :
public health engineering department PHED
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
2.09Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17735897
Location : tagdhar , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for water supply - composite multi layer pipe of size inner dia 25mm and outer dia 32mm as per tech spec , gi pipe 100mm dia 3m long confirming to conforming to is 1239 as per tch spec , gi tank nipple 25mm 6 inch with check nut and washer complete as per tech spec , ppr elbow 32mm conforming to is 15801 as per tech spec , ppr socket 32mm confirming to is as per tech spec , ppr equal union inner dia 25mm and outer dia 32mm complete as per tech spec , pp-r end cap 32mm dia suitable for 32mm outer dia pipe as per tech spec , pp-r connector 32mm dia suitable for 32 or 25mm outer dia pipe as per tech spec , pp-r tee 32mm dia suitable for 32mm outer dia pipe as per tech spec , pp-r reducer 32mm dia suitable for 32mm outer dia pipe as per tech spec , gi nipple 25mm 3 inch long as per tech spec , m seal 100 gm each pkt complete , cotton thread 100m long complete. , bib cock brass 15mm as per tech spec , gi nipple 25mm 4 inch long as per tech spec , gi nipple 25mm 6 inch long as per tech spec , gi equal union inner dia 25mm and outer dia 32mm as per tech spec , gi tee 25mm as per tech spec , gi tee 15mm as per tech spec , gi socket 25mm as per tech spec , gate valve brass gun metal 25mm dia complete. , gi pipe 15 mm dia med grade as per tech spec , gi pipe 20 mm dia med grade conforming to is 1239 part 2 2011 , gi reducer 25mm to 15mm conforming to is 1239 part 2 2011 , gi elbow 25mm conforming to is 1239 part 2 2011 , gi elbow 15mm conforming to is 1239 part 2 2011 , gi nipple 15mm 4 inch long conforming to is 1239 part 2 of 2011 , gi nipple 15mm 6 inch long conforming to is 1239 , gi socket 15mm confirming to conforming to is 1239 part 2 of 2011 , gi union 25mm conforming to is as per tech spec , gi plug 25mm conforming to is 1239 as per tech spec , triplex plunger pump of 5 hp 550 rpm with discharge capacity of 46 coupled with 10 hp diesel engine as per tech spec. , pre fabricated pump shed of size 2.4m x 2.4m and height 1.8m as per tech spec , rotational moulded polyethylene water storage tank double layer 5000 ltr capacity as per tech spec , quick setting compound conforming to is 9103 1999 as per tech spec , natural sand confirming to is 383 2016 as per tech spec , stone aggregate to be crushed rock or gravel 20mm graded as per tech spec , stone aggregate to be crushed rock or gravel 40mm graded as per tech spec , common burnt clay building bricks sub class b of size 230x115x75mm as per tech spec , stone aggregate to be crushed rock or gravel 63mm graded as per tech spec , gi pipe 100mm dia 3m long confirming to conforming to is 1239 of part 2 of 2011 , gi tank nipple 25mm 6 inch check nut and washer complete as per tech spec , ppr elbow 32mm conforming to is 15801 of 2008 as per tech spec , ppr socket 32mm confirming to is 15801 of 2008 as per tech spec , pp-r tee 32mm dia suitable for 32mm outer dia pipe confirming to is 15801 of 2008 as per tech spec , gi nipple 25mm 3 inch long conforming to is 1239 as per tech spec , m seal 100 gm each pkt complete. , bib cock brass 15mm confirming to is 781 of 1984 , gi nipple 25mm 4 inch long conforming to is 1239 of part 2 of 2011 , gi nipple 25mm 6 inch long conforming to is 1239 of part 2 of 2011 , gi equal union inner dia 25mm and outer dia 32mm complete as per tech spec , gi tee 25mm confirming to conforming to is 1239 of as per tech spec , gi tee 15mm confirming to conforming to is as per tech spec , gi socket 25mm confirming to conforming to is 1239 as per tech spec , gi pipe 15 mm dia, med grade conforming to is 1239 part 2 of 2021 , gi reducer 25mm to 15mm conforming to is 1239 of part 2 of 2011 , gi elbow 25mm conforming to is 1239 of part 2 of 2011 , gi elbow 15mm conforming to is 1239 of part 2 of 2011 , gi nipple 15mm 4 inch long conforming to is 1239 of part 2 of 2011 , gi nipple 15mm 6 inch long conforming to is 1239 of part 2 of 2011 , gi socket 15mm confirming to conforming to is 1239 of part 2 of 2011 , gi union 25mm conforming to is 1239 of part 2 of 2011 , gi plug 25mm conforming to is 1239 of part 2 of 2011 , triplex plunger pump of 7.5 hp coupled with 10 hp diesel engine , rotational moulded polyethylene water storage tank double layer 5000 ltr as per tech spec , quick setting compound conforming to is 9103 of 1999 rapidite make acclerex or cico or fosroc. , natural sand confirming to is 383-2016 as per tech spec , common burnt clay building bricks, sub class b of size 230x115x75mm as per tech spec , composite multi layer pipe size inner dia 25mm and outer dia 32mm as per tech spec , gi pipe 100mm dia 3m long confirming to conforming to is 1239 , gi tank nipple 25mm 6 inch check nut and washer complete conforming to is 1239 , ppr elbow 32mm conforming to is 15801 of 2008 , ppr socket 32mm confirming to is 15801 of 2008 , ppr equal union inner dia 25mm and outer dia 32mm complete , pp-r end cap 32mm dia suitable for 32mm outer dia pipe confirming to is 15801 of 2008 , pp-r connector 32mm dia suitable for 32 and r 25mm outer dia pipe as per tech spec , bib cock brass 15mm confirming to is 781 of 1984 as per tech spec , gi nipple 25mm 4 inch long conforming to is 1239 as per tech spec , gi nipple 25mm 6 inch long conforming to is 1239 as per tech spec , gi tee 25mm confirming to conforming to is 1239 of part 2 of 2011 , gi tee 15mm confirming to conforming to is 1239 of part 2, water supply, composite multi layer pipe of size inner dia 25mm and outer dia 32mm as per tech spec, gi pipe 100mm dia 3m long confirming to conforming to is 1239 as per tch spec, gi tank nipple 25mm 6 inch with check nut and washer complete as per tech spec, ppr elbow 32mm conforming to is 15801 as per tech spec, ppr socket 32mm confirming to is as per tech spec, ppr equal union inner dia 25mm and outer dia 32mm complete as per tech spec, pp-r end cap 32mm dia suitable for 32mm outer dia pipe as per tech spec, pp-r connector 32mm dia suitable for 32 or 25mm outer dia pipe as per tech spec, pp-r tee 32mm dia suitable for 32mm outer dia pipe as per tech spec, pp-r reducer 32mm dia suitable for 32mm outer dia pipe as per tech spec, gi nipple 25mm 3 inch long as per tech spec, m seal 100 gm each pkt complete, cotton thread 100m long complete., bib cock brass 15mm as per tech spec, gi nipple 25mm 4 inch long as per tech spec, gi nipple 25mm 6 inch long as per tech spec, gi equal union inner dia 25mm and outer dia 32mm as per tech spec, gi tee 25mm as per tech spec, gi tee 15mm as per tech spec, gi socket 25mm as per tech spec, gate valve brass gun metal 25mm dia complete., gi pipe 15 mm dia med grade as per tech spec, gi pipe 20 mm dia med grade conforming to is 1239 part 2 2011, gi reducer 25mm to 15mm conforming to is 1239 part 2 2011, gi elbow 25mm conforming to is 1239 part 2 2011, gi elbow 15mm conforming to is 1239 part 2 2011, gi nipple 15mm 4 inch long conforming to is 1239 part 2 of 2011, gi nipple 15mm 6 inch long conforming to is 1239, gi socket 15mm confirming to conforming to is 1239 part 2 of 2011, gi union 25mm conforming to is as per tech spec, gi plug 25mm conforming to is 1239 as per tech spec, triplex plunger pump of 5 hp 550 rpm with discharge capacity of 46 coupled with 10 hp diesel engine as per tech spec., pre fabricated pump shed of size 2.4m x 2.4m and height 1.8m as per tech spec, rotational moulded polyethylene water storage tank double layer 5000 ltr capacity as per tech spec, quick setting compound conforming to is 9103 1999 as per tech spec, natural sand confirming to is 383 2016 as per tech spec, stone aggregate to be crushed rock or gravel 20mm graded as per tech spec, stone aggregate to be crushed rock or gravel 40mm graded as per tech spec, common burnt clay building bricks sub class b of size 230x115x75mm as per tech spec, stone aggregate to be crushed rock or gravel 63mm graded as per tech spec, gi pipe 100mm dia 3m long confirming to conforming to is 1239 of part 2 of 2011, gi tank nipple 25mm 6 inch check nut and washer complete as per tech spec, ppr elbow 32mm conforming to is 15801 of 2008 as per tech spec, ppr socket 32mm confirming to is 15801 of 2008 as per tech spec, pp-r end cap 32mm dia suitable for 32mm outer dia pipe as per tech spec, pp-r tee 32mm dia suitable for 32mm outer dia pipe confirming to is 15801 of 2008 as per tech spec, gi nipple 25mm 3 inch long conforming to is 1239 as per tech spec, m seal 100 gm each pkt complete., bib cock brass 15mm confirming to is 781 of 1984, gi nipple 25mm 4 inch long conforming to is 1239 of part 2 of 2011, gi nipple 25mm 6 inch long conforming to is 1239 of part 2 of 2011, gi equal union inner dia 25mm and outer dia 32mm complete as per tech spec, gi tee 25mm confirming to conforming to is 1239 of as per tech spec, gi tee 15mm confirming to conforming to is as per tech spec, gi socket 25mm confirming to conforming to is 1239 as per tech spec, gi pipe 15 mm dia, med grade conforming to is 1239 part 2 of 2021, gi pipe 20 mm dia med grade conforming to is 1239 part 2 2011, gi reducer 25mm to 15mm conforming to is 1239 of part 2 of 2011, gi elbow 25mm conforming to is 1239 of part 2 of 2011, gi elbow 15mm conforming to is 1239 of part 2 of 2011, gi nipple 15mm 4 inch long conforming to is 1239 of part 2 of 2011, gi nipple 15mm 6 inch long conforming to is 1239 of part 2 of 2011, gi socket 15mm confirming to conforming to is 1239 of part 2 of 2011, gi union 25mm conforming to is 1239 of part 2 of 2011, gi plug 25mm conforming to is 1239 of part 2 of 2011, triplex plunger pump of 7.5 hp coupled with 10 hp diesel engine, rotational moulded polyethylene water storage tank double layer 5000 ltr as per tech spec, quick setting compound conforming to is 9103 of 1999 rapidite make acclerex or cico or fosroc., natural sand confirming to is 383-2016 as per tech spec, stone aggregate to be crushed rock or gravel 20mm graded as per tech spec, common burnt clay building bricks, sub class b of size 230x115x75mm as per tech spec, stone aggregate to be crushed rock or gravel 63mm graded as per tech spec, composite multi layer pipe size inner dia 25mm and outer dia 32mm as per tech spec, gi pipe 100mm dia 3m long confirming to conforming to is 1239, gi tank nipple 25mm 6 inch check nut and washer complete conforming to is 1239, ppr elbow 32mm conforming to is 15801 of 2008, ppr socket 32mm confirming to is 15801 of 2008, ppr equal union inner dia 25mm and outer dia 32mm complete, pp-r end cap 32mm dia suitable for 32mm outer dia pipe confirming to is 15801 of 2008, pp-r connector 32mm dia suitable for 32 and r 25mm outer dia pipe as per tech spec, pp-r tee 32mm dia suitable for 32mm outer dia pipe as per tech spec, bib cock brass 15mm confirming to is 781 of 1984 as per tech spec, gi nipple 25mm 4 inch long conforming to is 1239 as per tech spec, gi nipple 25mm 6 inch long conforming to is 1239 as per tech spec, gi equal union inner dia 25mm and outer dia 32mm complete as per tech spec, gi tee 25mm confirming to conforming to is 1239 of part 2 of 2011, gi tee 15mm confirming to conforming to is 1239 of part 2 2011 as per tech spec, gi socket 25mm cconfirming to conforming to is 1239 of part 2 of 2011 as per tech spec, gi pipe 15 mm dia med grade conforming to is 1239 as per tech spec, gi pipe 20 mm dia med grade conforming to is 1239 as per tech spec, gi reducer 25mm to 15mm conforming to is 1239 as per tech spec, gi elbow 25mm conforming to is 1239 as per tech spec, gi elbow 15mm conforming to is 1239 as per tech spec, gi nipple 15mm 4 inch long conforming to is 1239 as per tech spec, gi nipple 15mm 6 inch long conforming to is 1239 as per tech spec, gi socket 15mm confirming to conforming to is 1239 as per tech spec, gi union 25mm conforming to is 1239 as per tech spec, gi plug 25mm conforming to is 1239 as per tech spec, triplex plunger pump of 7.5 hp coupled with 10 hp diesel engine as per tech spec, triplex plunger pump of 5 hp coupled with 10 hp diesel engine as per tech spec, pre fabricated pump shed of size 2.4m x 2.4m and height 1.8m at front side and 1.60 m at rear side as per tech spec, rotational moulded polyethylene water storage tank double layer 5000 ltr capacity conforming to is 12701 1996, quick setting compound rapidite make acclerex or cico or fosroc, natural sand confirming to is 383-2016 as per tech spec, stone aggregate to be crushed rock or gravel 63mm graded as per tech spec., stone aggregate to be crushed rock or gravel 40mm graded as per tech spec, composite multi layer pipe size inner dia 25mm and outer dia 32mm as per tech spec, gi pipe 100mm dia 3m long confirming to is 1239 as per tech spec, ppr elbow 32mm conforming to is 15801 of 2008 as per tech spec, ppr socket 32mm confirming to is 15801of 2008, ppr equal union inner dia 25mm and outer dia 32mm complete as per tech spec, pp-r connector 32mm dia suitable for 32 and 25mm outer dia pipe as per tech spec, pp-r reducer 32mm dia suitable for 32mm outer dia as per tech spec, gi nipple 25mm 3 inch long conforming to is 1239 as per tech spec, cotton thread 100m long complete, bib cock brass 15mm as per tech spec, gi nipple 25mm 6 inch long conforming to is 1239 as per tech spec, gi tee 25mm confirming to is as per tech spec, gi tee 15mm confirming to is 1239 as per tech spec, gi socket 25mm confirming is 1239 as per tech spec, gi pipe 15 mm dia med grade conforming to is 1239, gi pipe 20 mm dia med grade conforming to is 1239, gi reducer 25mm to 15mm conforming to is 1239, gi elbow 25mm conforming to is 1239, gi nipple 15mm 4 inch long conforming to is 1239, gi nipple 15mm 6 inch long conforming to is 1239, gi socket 15mm confirming is 1239, gi union 25mm conforming to is 1239, gi plug 25mm conforming to is 1239, triplex plunger pump of 7.5 hp coupled with 10 hp diesel engine with all fittings and accessories as per tech spec, quick setting compound rapidite make acclerex cico fosroc, natural sand confirming to is 383-2016, stone aggregate to be crushed rock or gravel 20mm as per tech spec, aggregate to be crushed rock or gravel 40mm as per tech spec, common burnt clay building bricks, sub class b of size 230x115x75mm as per tech spec, tasla iron 18 inch, mason trowel karchi, plaster trowel with hard wooden handle isi marked, showel with wooden handle, brick hammer of 1.2 kgs, multipurpose non slip rubber gloves for scrubbing, cleaning , brick work etc, hacksaw frame with 2 blade, fawda with wooden handle, pipe wrench 12 inch, pipe wrench 18 inch, aluminimum spirit level 6 inch, rammer with wooden handle wt 5 kg, spanner adjustable 18 inch, sheet cutting blade, hacksaw frame blade double end, welding rod swr-10 size 3.15x350mm as per tech spec, paint brush 3 inch, paint brush 4 inch, brick trowel conforming to is 6013 of 2023 as per tech spec, drop-forged high-grade carbon steel brick hammer as per tech spec, light weight extruded aluminum alloy straight edge as per tech spec, plaster trowel confirming to is 6013 of 2023 as per tech spec, 16-inch or 400mm diameter mortar pan or tasla as per tech spec, high-tenacity nylon monofilament line 1.2 mm to 1.5mm diameter as per tech spec, cast iron plumb bobs as per tech spec, heavy-duty metal hand rammers for earth compaction as per tech spec, heavy-duty pickaxes or kudali 14 cp with chisel and point ends as per tech spec att, shovel square nose 14 gauge tata high carbon steel, product code svl 022 as per tech spec, single-piece hot-forged carbon steel powrah as per tech spec, non-slip, heavy-duty industrial rubber gloves as per tech spec, aluminium spirit levels 12-inch 300 mm as per tech spec, transparent, flexible pvc water leveling tubes in 50-meter as per tech spec, non-metallic fiberglass measuring tape 15 mtr as per tech spec, heavy duty crow bar, 5 feet 1500 mm length as per tech spec, electric chop saw machine blade of 14 inch dia as per tech spec, electric hand grinder cutting wheel of dia 4 inch as per tech spec, iron cutting machine blade, hack saw blade
Agency / Dept :
indian army
Due Date :
Oct 24, 2026 (9 days left)
Tender Value :
77.55L
View Documents
T18 Ref No : 17520397
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , s and fixing internal hydrant valve , supply and fixing of external yard hydrant valve , sfc of butterfly valve , s and fixing of orifice plate , pitc non return valve , pitc of stainless steel y strainer , s and fixing of 15 m hose pipe , s and fixing first aid hose reel , s and fixing 63 mm dia gun metal short branch pipe , s and fixing of fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , installation control valve of cast iron body , s and f of hose cabinet , cutting holes , supply of cable , laying of cable , s and m end termination , s and f fire cable , cable tray , g i plate earthing , p and f gi strip , gi strip for looping , p and f gi earth wire , p and f gi pipe, supply installation testing and commissioning of firefighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of die sel engine driven main fire pump conforming to is 12469 019 suitable for automatic operation and consisting of following, complete in all respects, as required diesel driven pump b horizontal pe, stage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe xtended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential ilencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as quired. e suitable cement concrete foundation duly plastered and with anti vibration pads. note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head., jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads. note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects, as required terrace pump. b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head., control panels fabrication supply installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required. incoming 250a, 50ka 4 pole mccb, ic equal to 100 percent icu rating digital voltmeter 0 500v with selector switch digital ammeter 0 250 a with selector swtich and cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 300a. outgoing note all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps main fire pump 125 a, 50katpn mccb, ics is equal to 100 percent icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. jockey pump jockey pump 63 a, 50ka tpn mccb, icsis equal to 100 percent icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, note may please be see at atc of special repair no. 5, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories. providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc. conforming to is 636 type a as required. gun metal, supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. gun meta, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 4 way 150 mm dia m.s. pipe, providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia, supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750x mm x 600 mm x 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15x15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
59.95L
View Documents
T18 Ref No : 17564432
Location : junagadh , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment for mechanical and automobile group - pneumatic rivet gun , chain puller block , caliper hermachrodite , card file steel wire brush , profile gauges , boring bar , dowel pin , standard tap screws , medium carbon heat treated alloy steel metric studs and bolts along with nuts for display of standard length , caps screws , drills guage straight shank , drill gauge , bolt nut and washer set , gear spur , belt v , belt flat , washer clutch keys jib cotter and circlip , lifting sling , swage block 5048 , set of rowel punch , conduit pipe cutting and threading machines , conduit pipe bending machine , hacksaw frame , gi pipe bending machine , pvc pipe bending spring , multi scan tool , cylinder liner , plastigauge, बीीओ यूशीीषक /boq title, with standard accesorries, 3 ton with tripod stand, spring 15 cm, 3 inch x 5 inch, plate type for demonstration metric standard, indexable with insert 1inch shank, straight dia 1 inch length 4 inch material stainless steel, m3 m4 m5 m6 m8 m10 m12 m14 m16, may be manufactured in house m6 m8 m10 m12 m14 m16 standard, m6 m8 m10 m12, letter sizes a to z with guage, wire size 1 to 60 with guage, 1.5 to 12.5 mm in steps of 0.5 mm, m20x2.5x90long part thread hex head, old damaged to fit 50 mm shaft dia, to fit on pulley, minimum 25mm size carbon steel material, 8mm nominal dia single leg sling, cast iron 16 x 16x 16 inch, 8 10 mm, adjustable for 15 mm to 30 mm, suitable for 15mm 18mm 25mm and 30mm pipe, fixed 150 mm, 19 mm to 32 mm, 19 mm to 25 mm, car sensor scanner, dry &and wet liner press fit and slidefit liner each 1, for clearance measurement
Agency / Dept :
department of employment and training DET
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
2.44L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17564442
Location : bhabhar , gujarat
Source : GEM Tenders
LIVE TENDER
tender for scriber 150 mm double ended , hammer sledge double faced 4 kg , spindle key for opening cylinder valve , metal rack 1820x1210x450 mm , first aid box , multi angle magnetic clamp set - metal base 18x10x10 cm- , welding helmet auto darkening type , fire extinguisher soda acid foam type 7 ltr cap , power cutter electrically operated -portable abrasive cut off machine- , swagging and flooring tool kit 45 degree tubing 18 to 34 inch , ag 4 grinder , chuck drill 12 mm capacity with key , tailors card scale triangular , tailoring woodenplastic square , thread cutter 24 , rule - scale- plastic 2460 cm , patern notcher , stand wooden t shaped for hanging dress , electric steam iron 450750 watts 230 v with automatic heat control , machine attachmentzipper foot , machine attachmenttucker foot , machine attachmenthem folder , machine attachmentzigzag foot , glass show case for display of jobs 450 mmx600mmx850 mm , dress for dummies ladies 10 -half- , dress for dummies ladies 12 -full- , dress for dummiesgents 42-full- , electrician screw driver 250mm , philips screw driver set of 5 pieces 100 mm to 300 mm , spanner ring set of 12 6 to 32 mm -metric- , air ratchet with standard accessories , angle plate adjustable 250x150x175mm , cylinder bore gauge capacity 5 meters flexible in case 20 to 160 mm , cylinder liner dry and wet liner press fitand slidefit liner , fuel injection pump dismantling tool kit universal vice , hand shear universal 250mm , insulated screw driver 20 cmx9mm blade , insulated screw driver 30 cmx9mm blade , oil stone 15 cmx5 cmx25 cm , pipe flaring tool , piston ring groove cleaner , radiator cut sectiondown flow , radiator pressure cap, iti bhabhar tools equipment boq, 150 mm double ended, sledge double faced 4 kg, item spindle key for gas cylinder valve application for opening and closing gas cylinder spindle valves material forged carbon steel high strength steel construction heavyduty singlepiece profile square socket suitable for standard cylinder spindle finish chrome plated corrosion resistant length approx 100-150 mm operation easy and safe manual operation compatibility suitable for oxygen co2 argon and other industrial gas cylinders, type heavyduty mild steel ms storage rack overall size 1820x1210x450 mm material crca mild steel with powdercoated finish construction slotted angle boltless knockdown design no of shelves minimum 5 adjustable shelves shelf material ms sheet minimum 08to10 mm thick frame thickness minimum 18to20 mm load capacity minimum 100 kg per shelf -uniformly distributed load- surface finish epoxy polyester powder coating rust and corrosion resistant colour grey bluegrey accessories nuts bolts shelf supports and adjustable levelling feet, type wallmounted portable first aid box material mild steel -ms- abs plastic with powdercoated finish -ms type- size approx 300x240x100 mm -or equivalent- colour white with green cross marking construction sturdy body with hinged door and secure latchlock compartments multiple compartmentstrays for organized storage of first aid items mounting suitable for wall mounting with fixing accessories contents supplied with standard first aid contents as per relevant bisfactory requirements -bandages sterile gauze cotton adhesive tape antiseptic solution scissors safety pins disposable gloves burn dressing triangular bandage crepe bandage eye pad ors etc- application suitable for iti workshops, type multiangle magnetic welding clamp magnetic holder set base size approx 180x100x100 mm material heavyduty steel body with permanent ferrite rare earth magnet holding angles 30degree 45degree 60degree 75degree 90degree and 135degree -or equivalent multiangle capability- magnetic holding force minimum 22 kg -50 lbs- per clamp surface finish powdercoated rust and corrosion resistant application suitable for holding ferrous workpieces during welding soldering brazing pipe fitting fabrication and assembly compatibility suitable for flat round square and angle iron workpieces features strong magnetic grip quick positioning handsfree operation reusable easy to clean accessories supplied as a complete set ready for use warranty minimum 1 year against manufacturing defects, type auto darkening welding helmet helmet material highimpact heatresistant polyamidenylon viewing area minimum 90x35 mm optical class 1112 or better shade range din 9 13 -adjustable- light state din 4 power supply solar cell with replaceable lithium battery sensitivity and delay adjustable sensitivity and delay controls uvir protection permanent din 16 protection headgear adjustable ratchettype headband with tilt and size adjustment applications suitable for mma -arc- migmag tig welding plasma cutting and grinding mode standards conforming to en 175 en 379 ce or equivalent international standards warranty minimum 1 year against manufacturing defects, type portable soda acid mechanical foam fire extinguisher capacity 7 litres body material seamless mild steel -ms- cylinder with corrosionresistant epoxy powdercoated finish extinguishing agent soda acid mechanical foam as applicable operating pressure as per is standard working temperature 5degreec to 55 degree c -or as per manufacturer specification- discharge time minimum 30 seconds discharge range minimum 4 metres mounting supplied with wall mounting bracket accessories discharge hose nozzle operating lever pressure indicator -where applicable- safety pin with seal compliance conforming to is 15683 and manufacturedlicensed as per bis requirements suitable for class a and class b fire hazards -wood paper cloth rubber flammable liquids- warranty minimum 1 year against manufacturing defects, portable electrically operated abrasive cutoff machine 355 mm wheel 254 mm bore 2000 2400 w motor 3800 4100 rpm 220 240 v ac single phase with safety guard workpiece clamp and cutting wheel, type manual swaging and 45degree flaring tool kit flaring angle 45degree tube capacity 18 316 14 516 38 12 58 and 34 material hardened alloy steel yoke flaring bar and swaging adapters application suitable for copper aluminium brass and soft steel tubing flaring type single 45degree precision flare swaging tools complete set of swaging adapters for the specified tube sizes construction heavyduty forged steel yoke with hardened precisionmachined clamping bar accessories flaring bar yoke swaging punchesadapters tube cutterdeburringreaming tool and blowmoulded carrying case finish corrosionresistant black oxidechrome plated finish suitable for refrigeration airconditioning plumbing automotive and general workshop applications warranty minimum 1 year against manufacturing defects, type portable electric angle grinder -ag4- wheel diameter 100 mm -4 inch- rated power 850 1000 w no load speed 10000 12000 rpm spindle thread m10 power supply 220 240 v ac 50 hz single phase switch type slidepaddle switch with safety lock body ergonomic compact doubleinsulated housing accessories side handle wheel guard flange set spannerwrench user manual application suitable for grinding cutting deburring and surface finishing of metal and masonry warranty minimum 1 year against manufacturing defects, keytype drill chuck capacity 15 12 mm heavyduty hardened steel construction precision machined suitable for drilling machine complete with chuck key, triangular tailors card scale approx 30 cm length durable plastic construction clear permanent metric graduations in mm cm suitable for tailoring and garment patternmaking applications, tailoring square lshaped rightangle type made of durable woodplastic approx 12x12 inch with clear metricinch graduations accurate 90degree angle and smooth edges suitable for garment pattern making, thread cutter 24 inch -approx 600 mm- heavyduty manual type with sharp hardened steel blade and durable ergonomic handle suitable for tailoringtextile workshop use, plastic measuring rulescale 24 inch -600 mm- length durable plastic construction with clear and permanent metricinch graduations straight and smooth edges suitable for tailoring and workshop measurement, manual pattern notcher handoperated hardened steel cutting blade durable ergonomic handle suitable for making vu notches on paper and cardboard garment patterns for tailoring applications, wooden tshaped dress hanging stand made from good quality seasoned hardwood sturdy construction with stable base and smooth polished finish suitable for hangingdisplaying dresses and garments in tailoringiti workshop, electric steam iron 450 750 w 230 v ac single phase with automatic heat controladjustable thermostat steam function durable nonstickstainlesssteel sole plate and safety thermal protection suitable for tailoring workshop use, sewing machine zipper foot attachment durable metalalloy construction suitable for standard sewing machines designed for close and accurate stitching along zipper teeth suitable for tailoringgarmentmaking applications, sewing machine tucker foot attachment durable metalalloy construction suitable for standard sewing machines designed for making uniform and parallel tuckspleats in fabric suitable for tailoringgarmentmaking applications, sewing machine hem folder attachment durable metal construction suitable for standard sewing machines designed for uniform folding and stitching of fabric edges suitable for tailoring and garmentmaking applications, sewing machine zigzag foot attachment durable metalalloy construction suitable for standard sewing machines designed for zigzag decorative and general stitching of fabrics suitable for tailoringgarmentmaking applications, item glass showcase for display of jobs overall size 450x600x850 mmtype glass display showcase frame ms aluminium frame with durable finish glass clear toughenedtempered glass shelves minimum 2 3 adjustable glass shelves door lockable glass door base strong and stable base finish smooth corrosionresistant and easy to clean application display of trainee jobs models garments and finished work, ladies dress dummy halfbody type standard size durable fibreplastic body with suitable fabric covering for pinning sturdy construction suitable for garment draping pattern making fitting and display, ladies dress dummy fullbody type size 12 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, gents dress dummy fullbody type size 42 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, item electrician screwdriver overall length 250 mm type insulated electrician screwdriver material chrome vanadium highcarbon steel tip hardened precisionground handle insulated ergonomic nonslip insulation suitable for electrical work finish corrosionresistant application electrical installation maintenance and iti workshop use, item phillips screwdriver set quantity 5 pieces tip type phillips crosshead length range 100 mm to 300 mm blade material hardened chrome vanadium alloy steel tip precisionground hardened and corrosionresistant handle ergonomic nonslip impactresistant sizes assorted sizes suitable for general electricalmechanical work application electrical maintenance and iti workshop use accessories complete set supplied in suitable holdercase, item ring spanner set quantity 12 pieces type doubleend ring spanner size range 6 to 32 mm -metric- material chrome vanadium steel finish chrome plated corrosion resistant ring profile 6point 12point suitable for standard fasteners marking clearly marked size on each spanner application mechanical fitting maintenance and iti workshop use, item pneumatic air ratchet wrench drive size 12 inch -127 mm- square drive type airoperated pneumatic working pressure 63 bar -90 psi- approx free speed minimum 150 rpm torque minimum 60 nm air inlet 14 inch material heavyduty alloy steel body direction forwardreverse operation accessories standard socketaccessory set air hose connector and suitable case application automobile servicing mechanical maintenance and iti workshop use, item adjustable angle plate size 250x150x175 mm type adjustable tilting angle plate material highquality cast iron steel construction heavyduty rigid and stable adjustment adjustable angle with secure locking arrangement surface machinedground working surfaces finish corrosionresistant application marking fitting machining and workholding operations in iti workshop, item cylinder bore gauge measuring range 20 160 mm type flexible extension type flexible rodcable length approx 5 m accuracy suitable for precision internal bore measurement material hardened steel alloy steel components reading compatible with dial indicator suitable measuring head accessories standard measuring anvilsextension accessories and carrying case application measurement of cylinder bores in automobilemechanical workshop, item cylinder liner sleeve types dry liner and wet liner fit types press fit and slide fit material cast iron alloy cast iron construction precision machined and honed surface smooth uniform and corrosionresistant application automobile engine cylinderliner demonstration and practical training quantity as per requirement representative samples of each type, item fuel injection pump dismantling tool kit type universal heavyduty material chrome vanadium alloy steel application dismantling and assembly of fuel injection pumps tools pullers holding tools spanners sockets and suitable dismantling accessories storage supplied in study tool case use suitable for automobile diesel engine practical training, item universal hand shear length 250 mm type manual hand operated blade material hardened highcarbon steel blades sharp durable and precisionground handle strong ergonomic and nonslip cutting capacity suitable for light sheet metal cloth and general workshop materials construction heavyduty and durable application fitting sheetmetal and iti workshop applications, item insulated screwdriver overall length 200 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item insulated screwdriver overall length 300 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item oil stone sharpening stone size 150x50x25 mm type combination fine grade sharpening stone material aluminium oxide silicon carbide shape rectangular surface uniform flat and smooth application sharpening and honing of cutting tools chisels blades and hand toolsuse suitable for iti fittingworkshop applications, item pipe flaring tool type manual hand operated application flaring of copper aluminium brake pipes tube sizes approx 3 16 mm material hardened steel alloy steel flare type single and double flare construction heavyduty precision machined handle ergonomic nonslip accessories flaring bar yoke and suitable adapters application automobile refrigeration practical training, item piston ring groove cleaner type manual hand operated application cleaning carbon deposits from piston ring grooves material hardened alloy steel cutter adjustable interchangeable cutting blades groove sizes suitable for common automobile engine piston grooves handle ergonomic nonslip grip construction heavyduty and durable accessories interchangeable bladescutters with storage case application automobile engine servicing and iti practical training, item radiator cut section down flow type automotive radiator sectionalcutaway model construction metal radiator core with tanks flow type downflow type coolant flows from upper tank to lower tank cut section transparentopen cut section to show internal construction and coolant flow path components visible upper tank tubes fins lower tank and coolant passages mounting sturdy standbase finish durable corrosionresistant application demonstration of radiator construction cooling system operation and coolant flow in iti automobilemechanic motor vehicle practical training, item radiator pressure cap type automotive radiator pressure cap material stainless steel brass with heatresistant rubber seal pressure rating suitable for standard automotive cooling systems function maintains specified coolingsystem pressure and controls coolant overflow valve pressure relief and vacuum valve seal heatresistant leakproof gasket construction durable and corrosionresistant application automobile cooling system practical training and demonstration
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
2.52L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Cast Iron Cap. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Cast Iron Cap sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Cast Iron Cap Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Cast Iron Cap, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Cast Iron Cap Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Cast Iron Cap Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Cast Iron Cap.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Cast Iron Cap depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Cast Iron Cap Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Cast Iron Cap bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Cast Iron Cap. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Cast Iron Cap, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Cast Iron Cap, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Cast Iron Cap?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Cast Iron Cap tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Cast Iron Cap?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Cast Iron Cap, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Cast Iron Cap is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All