sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

6Live variable frequency source Tender in gandevi

Are you a local business owner looking to secure government contracts specifically within gandevi? Tender18 provides a focused list of variable frequency source tenders that are restricted to the gandevi region and its surrounding limits.

This page is dedicated to vendors who prefer working on projects close to their operational base. We aggregate procurement data from the gandevi Municipal Corporation, local Smart City initiatives, zonal government offices, and city-based public sector units requiring variable frequency source.

Focusing on city-specific tenders allows for better logistical planning and cost control. Whether it involves the on-site installation of variable frequency source, regular supply cycles, or daily service management within gandevi, our platform ensures you find opportunities that match your geographic preference and technical expertise.


Dominate the gandevi Market with Local variable frequency source Bids

Targeting city-level tenders offers a distinct competitive advantage. By focusing on variable frequency source requirements in gandevi, you reduce transportation costs and improve service response times—factors that government buyers value highly.

Why Use Tender18 for City-Level Tracking?

  • Local Authority Coverage: We cover every tender released by civic bodies and local administrative wards in gandevi.
  • Smart City & Development Projects: Get early alerts on urban development projects requiring variable frequency source.
  • Reduced Competition: Find niche local bids that national players often overlook.
  • Precise Updates: Filter out statewide noise; get alerts only when variable frequency source is needed in gandevi.
  • Rate Contract Info: Track annual rate contracts (ARC) for variable frequency source specific to gandevi departments.

Who is Best Suited for variable frequency source Projects in gandevi?

These tenders are specifically curated for businesses that have a strong local presence or are willing to establish one. The ideal candidates include:

  • Local Distributors: Suppliers with stock points within gandevi.
  • City-Based Contractors: Firms capable of quick deployment in municipal zones.
  • Maintenance Agencies: Service providers offering 24/7 support in gandevi.
  • MSMEs in gandevi: Small businesses looking for low-budget, high-volume local orders.

If your strategy is to build a strong portfolio within gandevi before expanding, these variable frequency source tenders are your starting point.

Strengthen your business foothold in gandevi. Stop searching for needles in a haystack and start bidding on relevant variable frequency source opportunities right in your neighborhood.

Call Tender18 at 7069661818 for expert assistance in winning local government contracts.

Due Date
T18 Ref No : 16663957
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for boq 1 tools 4250 multimeter big , working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , soldering iron 10 w , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , ac energy meter single phase 5 amp 230 v , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , seam ripper , finger thimble steel , tailor card scale triangular , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , hammer cross pein 450 grams , neon tester pencile bit type 500 volt , square engineers 200 mm long , rubber gloves 5000 volts , wire stripper 150mm , file round 2nd cut 300 mm , line tester 5oo , screw driver electrician connector 100mm , level spirit 300 mm , dc shunt motor 3 hp 250 v , screw driver 100mm insulated 5 mm , electric iron 750 w 240v , rubber mat 2 meters x 1 meter x 9 mm , soldring iron 60 watt 230v , rechargeable battery 6 v 7ah , electrician helmet , ac celling fan or table fan 68w,230v , motion dectector , dust mask or nose mask regular size , letter and number punch 5mm material alloy steel , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , bottles for solutions 1000ml , bottles for solutions 500ml , conical flask 250ml , conical flask 150ml , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , garment hangers , waste bin big , pattern punch , pattern knotcher , pattern hanging stand , stand for hanging dress , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , hammer cross peen with handle 250 grams , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , phase sequence indicator 3 phase 415 v , smart meter singal phase smart energy meter , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave, multimeter-big with ac current, high voltage test probes, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, soldering iron 10 w power consumption 10 watt bit typefine point soldering tip temperature190 degree celsius is 959 1994, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, ac energy meter single phase 5 amp 230 v is 13779 1999, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, seam ripper, finger thimble steel, tailors card scale triangular, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, hammer cross pein 450 grams is 841 1983, neon tester pencile bit type 500 volt is 5579 1985, square engineers 200 mm long is 2103 1980, rubber gloves 5000 volts is 1899 1977, wire stripper 150mm is 5087 1969, file round 2nd cut 300 mm is 1931 2000, line tester 5oo is 5579 1985, screw driver electrician connector 100mm is 844 1979, level spirit 300 mm is 5706 1993, dc shunt motor 3 hp 250 v is 4722 2001, screw driver 100mm insulated 5 mm is 844 part 2 1979, electric iron 750 w 240v is 366 1991 is 302 2 3 2007, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, soldring iron 60 watt 230v is 959 1994, rechargeable battery 6 v 7ah is 15549, electrician helmet is 2925 1984, ac celling fan/ table fan 68w 230v is 374 2019, motion dectector, dust mask or nose mask regular size, letter and number punch 5mm material alloy steel is 6864 1984, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, bottles for solutions 1000ml borosilicate glass)is 1388, bottles for solutions 500ml borosilicate glass is 1388, conical flask 250ml borosilicate glass is 1381 part 1 2003, conical flask 150ml borosilicate glass is 1381 part 1 2003, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, garment hangers, waste bin big, pattern punch, pattern knotcher, pattern hanging stand, stand for hanging dress t shape, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, hammer cross peen with handle 250 grams is 4953 1989, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, phase sequence indicator 3 phase 415 v, smart meter singal phase smart energy meter is 16444 part 1 2015, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, bourdon tube type gauges of various ranges is 3624 1987
Agency / Dept :
department of employment and training DET
Due Date :
Aug 07, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17314792
Location : gandevi , gujarat
Source : GEM Tenders
tender for 4250 tools boq1 working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , finger thimble steel , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , rubber gloves 5000 volts , file round 2nd cut 300 mm , screw driver electrician connector 100mm , dc shunt motor 3 hp 250 v , rubber mat 2 meters x 1 meter x 9 mm , electrician helmet , motion dectector , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , pattern punch , pattern knotcher , pattern hanging stand , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave rectifier full wave rectifier , inclined limb manometers , simple tank type quantity meter , mercury in steel remote indicating thermometers various ranges , digital input or output cards , tds meter , geometrical shapes , mini drafter , auto clave electrically heated , heating mantles universal , ph meter digital , heating plate electric , wheatstone bridge , ameter 0 to 5 amp , voltmeter 0 to1 volt , voltmeter 0 to 4 volt , voltmeter 0 to 5 volt , voltmeter 0 to 25 volt , milivoltmeter 0 to 5 m volt , fire buckets with stand , multi angle magnetic clamp set metal base 18 x10 x 10 cm , power saw machine blade size 450 mm , burettes 25ml boroflow , funnels dia 7 point 5cms , watch glass 3 inch dia , glass test tubes 15 ml , round bottom distillation flask with side neck , connecting screw driver 10 x 100 mm , rheostat 500 ohm , resistance box 0 to 500 ohms , dc or ac ammeter 0 to 1000 ma , dc or ac ammeter 0 to 1000 micro a , rods with screw at one end for electrochemical equivalent carbon , rods with screw at one end for electrochemical equivalent copper , stands with clamps for burettes , first aid box , swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , cutter pipe miniature for copper tube 3 to 16 mm dia set , blower hand portable complete 1by10hp , digital thermometer graduated disc analogy type , instrumentation screw driver set 100mm , hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs , extractors screw or stud sizes 1 to 8 set , universal scribing block 220or225or250 mm pillar , blocks vee 150 x 100 x 100 mm , drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm , taps and dies complete set 5 6 8 10 and 12 mm set of 5 , file knife edge smooth 15o mm , file feather edge smooth 150 mm , file flat 2nd cut 300 mm safe edge , file swiss or needle or instrument set of 12 nos 150 mm , file hand 2nd cut 150 mm , card file or steel wire brush 3inch x 5 inch , clamp or vice tool maker 5 cm and 7 point 5cm set of 2 , c clamp 200 mm , scraper flat 12 mm x 150 mm , scraper 3 corner 15 cm , scraper half round 15 cm , chisel cold 9 mm round noze 100 mm , pipe die with die stock 3by 4 inch , fire bucket or sand bucket , wing campass 300mm , knurling tool diamond straight and diagonal , boring bar indexable with insert 1inch shank , lapping plate 6 inch dia , mallet dia 100 mm x 150 mm , hammer flat head with handle, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, finger thimble steel, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, rubber gloves 5000 volts is 1899 1977, file round 2nd cut 300 mm is 1931 2000, screw driver electrician connector 100mm is 844 1979, dc shunt motor 3 hp 250 v is 4722 2001, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, electrician helmet is 2925 1984, motion dectector, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, pattern punch, pattern knotcher, pattern hanging stand, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, simple tank type quantity meter, mercury in steel remote indicating thermometers various ranges is 13211 1991, digital input or output cards, tds meter is 3025 part 16 1984, geometrical shapes, mini drafter, auto clave electrically heated capacity 55 lit material ss 304 pressure gauge temp range 121 to 125 degree cel temp accuracy plus or minus 0 point 5 percent with auto cycle controller and solenoid valve foot lifting and drum is 3829, heating mantles universal temperature range 300 degree cel to 450 degree cel good quality fiberglass insulation analog or digital temperature controller suitable for various types of flasks 1l 2l 3l 5l to 10 liters, ph meter digital with ph range of 1 to 14 resolution of 0 point 01 ph temperature range up to 0 point 0 c to 100 c digital led or lcd display power supply of 230 vac plus or minus 10 percent with auto calibration facility auto manual temp compensation facility ph electrode to study the measurement of ph is 2711 1979, heating plate electric 1000 watt is 302 part 2 sec 6 2009, wheatstone bridge, ameter 0 to 5 amp is 1248 part 2 2003, voltmeter 0 to1 volt is 1248 part 2 2003, voltmeter 0 to 4 volt is 1248 part 2 2003, voltmeter 0 to 5 volt is 1248 part 2 2003, voltmeter 0 to 25 volt is 1248 part 2 2003, milivoltmeter 0 to 5 m volt is 1248 part 2 2003, fire buckets with stand is 2546 1974, multi angle magnetic clamp set metal base 18 x10 x 10 cm, power saw machine blade size 450 mm, burettes 25ml boroflow is 1997 2008, funnels dia 7 point 5 cms is 1541 2006, watch glass 3inch dia, glass test tubes 15 ml is 2618 2006, round bottom distillation flask with side neck is 2620 1963, connecting screw driver 10 x 100 mm is 844, rheostat 500 ohm is 9051 1979, resistance box 0 to 500 ohms, dc or ac ammeter 0 to 1000 ma is 1248 part 2 2003, dc or ac ammeter 0 to 1000 micro a is 1248 part 2 2003, rods with screw at one end for electrochemical equivalent carbon, rods with screw at one end for electrochemical equivalent copper, stands with clamps for burettes, first aid box is 13115 1991, swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch, cutter pipe miniature for copper tube 3 to 16 mm dia set, blower hand portable complete 1by10hp, digital thermometer graduated disc analogy type, instrumentation screw driver set 100mm, hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs is 10617 2018, extractors screw or stud sizes 1 to 8 set, universal scribing block 220or225or250 mm pillar, blocks vee 150 x 100 x 100 mm is 2949 1992, drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm is 5101, taps and dies complete set 5 6 8 10 and 12 mm set of 5, file knife edge smooth 15o mm is 1931 2000, file feather edge smooth 150 mm is 1931 2000, file flat 2nd cut 300 mm safe edge is 1931 2000, file swiss or needle or instrument set of 12 nos 150 mm is 1931 2000, file hand 2nd cut 150 mm is 1931 2000, card file or steel wire brush 3inch x 5 inch, clamp or vice tool maker 5 cm and 7 point 5 cm set of 2, c clamp 200 mm is 9181 1988, scraper flat 12 mm x 150 mm is 6861 1973, scraper 3 corner 15 cm is 6861 1973, scraper half round 15 cm is 6861 1973, chisel cold 9 mm round noze 100 mm is 402 1990, pipe die with die stock 3 by 4 inch, fire bucketor sand bucket is 2546 1974, wing campass 300mm is 3208 1989, knurling tool like diamond straight and diagonal, boring bar indexable with insert 1inch shank is 14864, lapping plate 6inch dia is 2285 2003, mallet dia 100 mm x 150 mm is 5675 1987, hammer flat head with handle is 841 1983, hammer planishing with handle is 841 1983, snip bent 250 mm is 6015 1989, gauge snap go and no go 25 to 50 mm by 5 mm is 3477, telescopic gauge range 8 to150 mm set of 6 pcs is 13197 1991, surface roughness comparison plates n1 to n12 grades, carbide wear block 1 mm to 2 mm is 2984 2003, dumpy level is 4590 1980
Agency / Dept :
department of employment and training DET
Due Date :
Sep 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17544199
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for 4250 tools boq1 working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , finger thimble steel , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , rubber gloves 5000 volts , file round 2nd cut 300 mm , screw driver electrician connector 100mm , dc shunt motor 3 hp 250 v , rubber mat 2 meters x 1 meter x 9 mm , electrician helmet , motion dectector , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , pattern punch , pattern knotcher , pattern hanging stand , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave rectifier full wave rectifier , inclined limb manometers , simple tank type quantity meter , mercury in steel remote indicating thermometers various ranges , digital input or output cards , tds meter , geometrical shapes , mini drafter , auto clave electrically heated , heating mantles universal , ph meter digital , heating plate electric , wheatstone bridge , ameter 0 to 5 amp , voltmeter 0 to1 volt , voltmeter 0 to 4 volt , voltmeter 0 to 5 volt , voltmeter 0 to 25 volt , milivoltmeter 0 to 5 m volt , fire buckets with stand , multi angle magnetic clamp set metal base 18 x10 x 10 cm , power saw machine blade size 450 mm , burettes 25ml boroflow , funnels dia 7 point 5cms , watch glass 3 inch dia , glass test tubes 15 ml , round bottom distillation flask with side neck , connecting screw driver 10 x 100 mm , rheostat 500 ohm , resistance box 0 to 500 ohms , dc or ac ammeter 0 to 1000 ma , dc or ac ammeter 0 to 1000 micro a , rods with screw at one end for electrochemical equivalent carbon , rods with screw at one end for electrochemical equivalent copper , stands with clamps for burettes , first aid box , swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , cutter pipe miniature for copper tube 3 to 16 mm dia set , blower hand portable complete 1by10hp , digital thermometer graduated disc analogy type , instrumentation screw driver set 100mm , hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs , extractors screw or stud sizes 1 to 8 set , universal scribing block 220or225or250 mm pillar , blocks vee 150 x 100 x 100 mm , drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm , taps and dies complete set 5 6 8 10 and 12 mm set of 5 , file knife edge smooth 15o mm , file feather edge smooth 150 mm , file flat 2nd cut 300 mm safe edge , file swiss or needle or instrument set of 12 nos 150 mm , file hand 2nd cut 150 mm , card file or steel wire brush 3inch x 5 inch , clamp or vice tool maker 5 cm and 7 point 5cm set of 2 , c clamp 200 mm , scraper flat 12 mm x 150 mm , scraper 3 corner 15 cm , scraper half round 15 cm , chisel cold 9 mm round noze 100 mm , pipe die with die stock 3by 4 inch , fire bucket or sand bucket , wing campass 300mm , knurling tool diamond straight and diagonal , boring bar indexable with insert 1inch shank , lapping plate 6 inch dia , mallet dia 100 mm x 150 mm , hammer flat head with handle, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, finger thimble steel, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, rubber gloves 5000 volts is 1899 1977, file round 2nd cut 300 mm is 1931 2000, screw driver electrician connector 100mm is 844 1979, dc shunt motor 3 hp 250 v is 4722 2001, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, electrician helmet is 2925 1984, motion dectector, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, pattern punch, pattern knotcher, pattern hanging stand, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, simple tank type quantity meter, mercury in steel remote indicating thermometers various ranges is 13211 1991, digital input or output cards, tds meter is 3025 part 16 1984, geometrical shapes, mini drafter, auto clave electrically heated capacity 55 lit material ss 304 pressure gauge temp range 121 to 125 degree cel temp accuracy plus or minus 0 point 5 percent with auto cycle controller and solenoid valve foot lifting and drum is 3829, heating mantles universal temperature range 300 degree cel to 450 degree cel good quality fiberglass insulation analog or digital temperature controller suitable for various types of flasks 1l 2l 3l 5l to 10 liters, ph meter digital with ph range of 1 to 14 resolution of 0 point 01 ph temperature range up to 0 point 0 c to 100 c digital led or lcd display power supply of 230 vac plus or minus 10 percent with auto calibration facility auto manual temp compensation facility ph electrode to study the measurement of ph is 2711 1979, heating plate electric 1000 watt is 302 part 2 sec 6 2009, wheatstone bridge, ameter 0 to 5 amp is 1248 part 2 2003, voltmeter 0 to1 volt is 1248 part 2 2003, voltmeter 0 to 4 volt is 1248 part 2 2003, voltmeter 0 to 5 volt is 1248 part 2 2003, voltmeter 0 to 25 volt is 1248 part 2 2003, milivoltmeter 0 to 5 m volt is 1248 part 2 2003, fire buckets with stand is 2546 1974, multi angle magnetic clamp set metal base 18 x10 x 10 cm, power saw machine blade size 450 mm, burettes 25ml boroflow is 1997 2008, funnels dia 7 point 5 cms is 1541 2006, watch glass 3inch dia, glass test tubes 15 ml is 2618 2006, round bottom distillation flask with side neck is 2620 1963, connecting screw driver 10 x 100 mm is 844, rheostat 500 ohm is 9051 1979, resistance box 0 to 500 ohms, dc or ac ammeter 0 to 1000 ma is 1248 part 2 2003, dc or ac ammeter 0 to 1000 micro a is 1248 part 2 2003, rods with screw at one end for electrochemical equivalent carbon, rods with screw at one end for electrochemical equivalent copper, stands with clamps for burettes, first aid box is 13115 1991, swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch, cutter pipe miniature for copper tube 3 to 16 mm dia set, blower hand portable complete 1by10hp, digital thermometer graduated disc analogy type, instrumentation screw driver set 100mm, hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs is 10617 2018, extractors screw or stud sizes 1 to 8 set, universal scribing block 220or225or250 mm pillar, blocks vee 150 x 100 x 100 mm is 2949 1992, drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm is 5101, taps and dies complete set 5 6 8 10 and 12 mm set of 5, file knife edge smooth 15o mm is 1931 2000, file feather edge smooth 150 mm is 1931 2000, file flat 2nd cut 300 mm safe edge is 1931 2000, file swiss or needle or instrument set of 12 nos 150 mm is 1931 2000, file hand 2nd cut 150 mm is 1931 2000, card file or steel wire brush 3inch x 5 inch, clamp or vice tool maker 5 cm and 7 point 5 cm set of 2, c clamp 200 mm is 9181 1988, scraper flat 12 mm x 150 mm is 6861 1973, scraper 3 corner 15 cm is 6861 1973, scraper half round 15 cm is 6861 1973, chisel cold 9 mm round noze 100 mm is 402 1990, pipe die with die stock 3 by 4 inch, fire bucketor sand bucket is 2546 1974, wing campass 300mm is 3208 1989, knurling tool like diamond straight and diagonal, boring bar indexable with insert 1inch shank is 14864, lapping plate 6inch dia is 2285 2003, mallet dia 100 mm x 150 mm is 5675 1987, hammer flat head with handle is 841 1983, hammer planishing with handle is 841 1983, snip bent 250 mm is 6015 1989, gauge snap go and no go 25 to 50 mm by 5 mm is 3477, telescopic gauge range 8 to150 mm set of 6 pcs is 13197 1991, surface roughness comparison plates n1 to n12 grades, carbide wear block 1 mm to 2 mm is 2984 2003, dumpy level is 4590 1980
Agency / Dept :
department of employment and training DET
Due Date :
Oct 03, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17655485
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for 4250 tools working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , finger thimble steel , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , rubber gloves 5000 volts , file round 2nd cut 300 mm , screw driver electrician connector 100mm , dc shunt motor 3 hp 250 v , rubber mat 2 meters x 1 meter x 9 mm , electrician helmet , motion dectector , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , pattern punch , pattern knotcher , pattern hanging stand , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave rectifier full wave rectifier , inclined limb manometers , simple tank type quantity meter , mercury in steel remote indicating thermometers various ranges , digital input or output cards , tds meter , geometrical shapes , mini drafter , auto clave electrically heated , heating mantles universal , ph meter digital , heating plate electric , wheatstone bridge , ameter 0 to 5 amp , voltmeter 0 to1 volt , voltmeter 0 to 4 volt , voltmeter 0 to 5 volt , voltmeter 0 to 25 volt , milivoltmeter 0 to 5 m volt , fire buckets with stand , multi angle magnetic clamp set metal base 18 x10 x 10 cm , power saw machine blade size 450 mm , burettes 25ml boroflow , funnels dia 7 point 5cms , watch glass 3 inch dia , glass test tubes 15 ml , round bottom distillation flask with side neck , connecting screw driver 10 x 100 mm , rheostat 500 ohm , resistance box 0 to 500 ohms , dc or ac ammeter 0 to 1000 ma , dc or ac ammeter 0 to 1000 micro a , rods with screw at one end for electrochemical equivalent carbon , rods with screw at one end for electrochemical equivalent copper , stands with clamps for burettes , first aid box , swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , cutter pipe miniature for copper tube 3 to 16 mm dia set , blower hand portable complete 1by10hp , digital thermometer graduated disc analogy type , instrumentation screw driver set 100mm , hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs , extractors screw or stud sizes 1 to 8 set , universal scribing block 220or225or250 mm pillar , blocks vee 150 x 100 x 100 mm , drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm , taps and dies complete set 5 6 8 10 and 12 mm set of 5 , file knife edge smooth 15o mm , file feather edge smooth 150 mm , file flat 2nd cut 300 mm safe edge , file swiss or needle or instrument set of 12 nos 150 mm , file hand 2nd cut 150 mm , card file or steel wire brush 3inch x 5 inch , clamp or vice tool maker 5 cm and 7 point 5cm set of 2 , c clamp 200 mm , scraper flat 12 mm x 150 mm , scraper 3 corner 15 cm , scraper half round 15 cm , chisel cold 9 mm round noze 100 mm , pipe die with die stock 3by 4 inch , fire bucket or sand bucket , wing campass 300mm , knurling tool diamond straight and diagonal , boring bar indexable with insert 1inch shank , lapping plate 6 inch dia , mallet dia 100 mm x 150 mm , hammer flat head with handle, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, finger thimble steel, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, rubber gloves 5000 volts is 1899 1977, file round 2nd cut 300 mm is 1931 2000, screw driver electrician connector 100mm is 844 1979, dc shunt motor 3 hp 250 v is 4722 2001, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, electrician helmet is 2925 1984, motion dectector, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, pattern punch, pattern knotcher, pattern hanging stand, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, simple tank type quantity meter, mercury in steel remote indicating thermometers various ranges is 13211 1991, digital input or output cards, tds meter is 3025 part 16 1984, geometrical shapes, mini drafter, auto clave electrically heated capacity 55 lit material ss 304 pressure gauge temp range 121 to 125 degree cel temp accuracy plus or minus 0 point 5 percent with auto cycle controller and solenoid valve foot lifting and drum is 3829, heating mantles universal temperature range 300 degree cel to 450 degree cel good quality fiberglass insulation analog or digital temperature controller suitable for various types of flasks 1l 2l 3l 5l to 10 liters, ph meter digital with ph range of 1 to 14 resolution of 0 point 01 ph temperature range up to 0 point 0 c to 100 c digital led or lcd display power supply of 230 vac plus or minus 10 percent with auto calibration facility auto manual temp compensation facility ph electrode to study the measurement of ph is 2711 1979, heating plate electric 1000 watt is 302 part 2 sec 6 2009, wheatstone bridge, ameter 0 to 5 amp is 1248 part 2 2003, voltmeter 0 to1 volt is 1248 part 2 2003, voltmeter 0 to 4 volt is 1248 part 2 2003, voltmeter 0 to 5 volt is 1248 part 2 2003, voltmeter 0 to 25 volt is 1248 part 2 2003, milivoltmeter 0 to 5 m volt is 1248 part 2 2003, fire buckets with stand is 2546 1974, multi angle magnetic clamp set metal base 18 x10 x 10 cm, power saw machine blade size 450 mm, burettes 25ml boroflow is 1997 2008, funnels dia 7 point 5 cms is 1541 2006, watch glass 3inch dia, glass test tubes 15 ml is 2618 2006, round bottom distillation flask with side neck is 2620 1963, connecting screw driver 10 x 100 mm is 844, rheostat 500 ohm is 9051 1979, resistance box 0 to 500 ohms, dc or ac ammeter 0 to 1000 ma is 1248 part 2 2003, dc or ac ammeter 0 to 1000 micro a is 1248 part 2 2003, rods with screw at one end for electrochemical equivalent carbon, rods with screw at one end for electrochemical equivalent copper, stands with clamps for burettes, first aid box is 13115 1991, swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch, cutter pipe miniature for copper tube 3 to 16 mm dia set, blower hand portable complete 1by10hp, digital thermometer graduated disc analogy type, instrumentation screw driver set 100mm, hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs is 10617 2018, extractors screw or stud sizes 1 to 8 set, universal scribing block 220or225or250 mm pillar, blocks vee 150 x 100 x 100 mm is 2949 1992, drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm is 5101, taps and dies complete set 5 6 8 10 and 12 mm set of 5, file knife edge smooth 15o mm is 1931 2000, file feather edge smooth 150 mm is 1931 2000, file flat 2nd cut 300 mm safe edge is 1931 2000, file swiss or needle or instrument set of 12 nos 150 mm is 1931 2000, file hand 2nd cut 150 mm is 1931 2000, card file or steel wire brush 3inch x 5 inch, clamp or vice tool maker 5 cm and 7 point 5 cm set of 2, c clamp 200 mm is 9181 1988, scraper flat 12 mm x 150 mm is 6861 1973, scraper 3 corner 15 cm is 6861 1973, scraper half round 15 cm is 6861 1973, chisel cold 9 mm round noze 100 mm is 402 1990, pipe die with die stock 3 by 4 inch, fire bucketor sand bucket is 2546 1974, wing campass 300mm is 3208 1989, knurling tool like diamond straight and diagonal, boring bar indexable with insert 1inch shank is 14864, lapping plate 6inch dia is 2285 2003, mallet dia 100 mm x 150 mm is 5675 1987, hammer flat head with handle is 841 1983, hammer planishing with handle is 841 1983, snip bent 250 mm is 6015 1989, gauge snap go and no go 25 to 50 mm by 5 mm is 3477, telescopic gauge range 8 to150 mm set of 6 pcs is 13197 1991, surface roughness comparison plates n1 to n12 grades, carbide wear block 1 mm to 2 mm is 2984 2003, dumpy level is 4590 1980
Agency / Dept :
department of employment and training DET
Due Date :
Oct 09, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17660322
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for 4250 tools working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , finger thimble steel , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , rubber gloves 5000 volts , file round 2nd cut 300 mm , screw driver electrician connector 100mm , dc shunt motor 3 hp 250 v , rubber mat 2 meters x 1 meter x 9 mm , electrician helmet , motion dectector , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , pattern punch , pattern knotcher , pattern hanging stand , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave rectifier full wave rectifier , inclined limb manometers , simple tank type quantity meter , mercury in steel remote indicating thermometers various ranges , digital input or output cards , tds meter , geometrical shapes , mini drafter , auto clave electrically heated , heating mantles universal , ph meter digital , heating plate electric , wheatstone bridge , ameter 0 to 5 amp , voltmeter 0 to1 volt , voltmeter 0 to 4 volt , voltmeter 0 to 5 volt , voltmeter 0 to 25 volt , milivoltmeter 0 to 5 m volt , fire buckets with stand , multi angle magnetic clamp set metal base 18 x10 x 10 cm , power saw machine blade size 450 mm , burettes 25ml boroflow , funnels dia 7 point 5cms , watch glass 3 inch dia , glass test tubes 15 ml , round bottom distillation flask with side neck , connecting screw driver 10 x 100 mm , rheostat 500 ohm , resistance box 0 to 500 ohms , dc or ac ammeter 0 to 1000 ma , dc or ac ammeter 0 to 1000 micro a , rods with screw at one end for electrochemical equivalent carbon , rods with screw at one end for electrochemical equivalent copper , stands with clamps for burettes , first aid box , swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , cutter pipe miniature for copper tube 3 to 16 mm dia set , blower hand portable complete 1by10hp , digital thermometer graduated disc analogy type , instrumentation screw driver set 100mm , hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs , extractors screw or stud sizes 1 to 8 set , universal scribing block 220or225or250 mm pillar , blocks vee 150 x 100 x 100 mm , drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm , taps and dies complete set 5 6 8 10 and 12 mm set of 5 , file knife edge smooth 15o mm , file feather edge smooth 150 mm , file flat 2nd cut 300 mm safe edge , file swiss or needle or instrument set of 12 nos 150 mm , file hand 2nd cut 150 mm , card file or steel wire brush 3inch x 5 inch , clamp or vice tool maker 5 cm and 7 point 5cm set of 2 , c clamp 200 mm , scraper flat 12 mm x 150 mm , scraper 3 corner 15 cm , scraper half round 15 cm , chisel cold 9 mm round noze 100 mm , pipe die with die stock 3by 4 inch , fire bucket or sand bucket , wing campass 300mm , knurling tool diamond straight and diagonal , boring bar indexable with insert 1inch shank , lapping plate 6 inch dia , mallet dia 100 mm x 150 mm , hammer flat head with handle, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, finger thimble steel, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, rubber gloves 5000 volts is 1899 1977, file round 2nd cut 300 mm is 1931 2000, screw driver electrician connector 100mm is 844 1979, dc shunt motor 3 hp 250 v is 4722 2001, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, electrician helmet is 2925 1984, motion dectector, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, pattern punch, pattern knotcher, pattern hanging stand, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, simple tank type quantity meter, mercury in steel remote indicating thermometers various ranges is 13211 1991, digital input or output cards, tds meter is 3025 part 16 1984, geometrical shapes, mini drafter, auto clave electrically heated capacity 55 lit material ss 304 pressure gauge temp range 121 to 125 degree cel temp accuracy plus or minus 0 point 5 percent with auto cycle controller and solenoid valve foot lifting and drum is 3829, heating mantles universal temperature range 300 degree cel to 450 degree cel good quality fiberglass insulation analog or digital temperature controller suitable for various types of flasks 1l 2l 3l 5l to 10 liters, ph meter digital with ph range of 1 to 14 resolution of 0 point 01 ph temperature range up to 0 point 0 c to 100 c digital led or lcd display power supply of 230 vac plus or minus 10 percent with auto calibration facility auto manual temp compensation facility ph electrode to study the measurement of ph is 2711 1979, heating plate electric 1000 watt is 302 part 2 sec 6 2009, wheatstone bridge, ameter 0 to 5 amp is 1248 part 2 2003, voltmeter 0 to1 volt is 1248 part 2 2003, voltmeter 0 to 4 volt is 1248 part 2 2003, voltmeter 0 to 5 volt is 1248 part 2 2003, voltmeter 0 to 25 volt is 1248 part 2 2003, milivoltmeter 0 to 5 m volt is 1248 part 2 2003, fire buckets with stand is 2546 1974, multi angle magnetic clamp set metal base 18 x10 x 10 cm, power saw machine blade size 450 mm, burettes 25ml boroflow is 1997 2008, funnels dia 7 point 5 cms is 1541 2006, watch glass 3inch dia, glass test tubes 15 ml is 2618 2006, round bottom distillation flask with side neck is 2620 1963, connecting screw driver 10 x 100 mm is 844, rheostat 500 ohm is 9051 1979, resistance box 0 to 500 ohms, dc or ac ammeter 0 to 1000 ma is 1248 part 2 2003, dc or ac ammeter 0 to 1000 micro a is 1248 part 2 2003, rods with screw at one end for electrochemical equivalent carbon, rods with screw at one end for electrochemical equivalent copper, stands with clamps for burettes, first aid box is 13115 1991, swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch, cutter pipe miniature for copper tube 3 to 16 mm dia set, blower hand portable complete 1by10hp, digital thermometer graduated disc analogy type, instrumentation screw driver set 100mm, hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs is 10617 2018, extractors screw or stud sizes 1 to 8 set, universal scribing block 220or225or250 mm pillar, blocks vee 150 x 100 x 100 mm is 2949 1992, drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm is 5101, taps and dies complete set 5 6 8 10 and 12 mm set of 5, file knife edge smooth 15o mm is 1931 2000, file feather edge smooth 150 mm is 1931 2000, file flat 2nd cut 300 mm safe edge is 1931 2000, file swiss or needle or instrument set of 12 nos 150 mm is 1931 2000, file hand 2nd cut 150 mm is 1931 2000, card file or steel wire brush 3inch x 5 inch, clamp or vice tool maker 5 cm and 7 point 5 cm set of 2, c clamp 200 mm is 9181 1988, scraper flat 12 mm x 150 mm is 6861 1973, scraper 3 corner 15 cm is 6861 1973, scraper half round 15 cm is 6861 1973, chisel cold 9 mm round noze 100 mm is 402 1990, pipe die with die stock 3 by 4 inch, fire bucketor sand bucket is 2546 1974, wing campass 300mm is 3208 1989, knurling tool like diamond straight and diagonal, boring bar indexable with insert 1inch shank is 14864, lapping plate 6inch dia is 2285 2003, mallet dia 100 mm x 150 mm is 5675 1987, hammer flat head with handle is 841 1983, hammer planishing with handle is 841 1983, snip bent 250 mm is 6015 1989, gauge snap go and no go 25 to 50 mm by 5 mm is 3477, telescopic gauge range 8 to150 mm set of 6 pcs is 13197 1991, surface roughness comparison plates n1 to n12 grades, carbide wear block 1 mm to 2 mm is 2984 2003, dumpy level is 4590 1980
Agency / Dept :
department of employment and training DET
Due Date :
Oct 09, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17632497
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for 4250 tools boq1 working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , finger thimble steel , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , rubber gloves 5000 volts , file round 2nd cut 300 mm , screw driver electrician connector 100mm , dc shunt motor 3 hp 250 v , rubber mat 2 meters x 1 meter x 9 mm , electrician helmet , motion dectector , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , pattern punch , pattern knotcher , pattern hanging stand , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave rectifier full wave rectifier , inclined limb manometers , simple tank type quantity meter , mercury in steel remote indicating thermometers various ranges , digital input or output cards , tds meter , geometrical shapes , mini drafter , auto clave electrically heated , heating mantles universal , ph meter digital , heating plate electric , wheatstone bridge , ameter 0 to 5 amp , voltmeter 0 to1 volt , voltmeter 0 to 4 volt , voltmeter 0 to 5 volt , voltmeter 0 to 25 volt , milivoltmeter 0 to 5 m volt , fire buckets with stand , multi angle magnetic clamp set metal base 18 x10 x 10 cm , power saw machine blade size 450 mm , burettes 25ml boroflow , funnels dia 7 point 5cms , watch glass 3 inch dia , glass test tubes 15 ml , round bottom distillation flask with side neck , connecting screw driver 10 x 100 mm , rheostat 500 ohm , resistance box 0 to 500 ohms , dc or ac ammeter 0 to 1000 ma , dc or ac ammeter 0 to 1000 micro a , rods with screw at one end for electrochemical equivalent carbon , rods with screw at one end for electrochemical equivalent copper , stands with clamps for burettes , first aid box , swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , cutter pipe miniature for copper tube 3 to 16 mm dia set , blower hand portable complete 1by10hp , digital thermometer graduated disc analogy type , instrumentation screw driver set 100mm , hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs , extractors screw or stud sizes 1 to 8 set , universal scribing block 220or225or250 mm pillar , blocks vee 150 x 100 x 100 mm , drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm , taps and dies complete set 5 6 8 10 and 12 mm set of 5 , file knife edge smooth 15o mm , file feather edge smooth 150 mm , file flat 2nd cut 300 mm safe edge , file swiss or needle or instrument set of 12 nos 150 mm , file hand 2nd cut 150 mm , card file or steel wire brush 3inch x 5 inch , clamp or vice tool maker 5 cm and 7 point 5cm set of 2 , c clamp 200 mm , scraper flat 12 mm x 150 mm , scraper 3 corner 15 cm , scraper half round 15 cm , chisel cold 9 mm round noze 100 mm , pipe die with die stock 3by 4 inch , fire bucket or sand bucket , wing campass 300mm , knurling tool diamond straight and diagonal , boring bar indexable with insert 1inch shank , lapping plate 6 inch dia , mallet dia 100 mm x 150 mm , hammer flat head with handle, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, finger thimble steel, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, rubber gloves 5000 volts is 1899 1977, file round 2nd cut 300 mm is 1931 2000, screw driver electrician connector 100mm is 844 1979, dc shunt motor 3 hp 250 v is 4722 2001, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, electrician helmet is 2925 1984, motion dectector, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, pattern punch, pattern knotcher, pattern hanging stand, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, simple tank type quantity meter, mercury in steel remote indicating thermometers various ranges is 13211 1991, digital input or output cards, tds meter is 3025 part 16 1984, geometrical shapes, mini drafter, auto clave electrically heated capacity 55 lit material ss 304 pressure gauge temp range 121 to 125 degree cel temp accuracy plus or minus 0 point 5 percent with auto cycle controller and solenoid valve foot lifting and drum is 3829, heating mantles universal temperature range 300 degree cel to 450 degree cel good quality fiberglass insulation analog or digital temperature controller suitable for various types of flasks 1l 2l 3l 5l to 10 liters, ph meter digital with ph range of 1 to 14 resolution of 0 point 01 ph temperature range up to 0 point 0 c to 100 c digital led or lcd display power supply of 230 vac plus or minus 10 percent with auto calibration facility auto manual temp compensation facility ph electrode to study the measurement of ph is 2711 1979, heating plate electric 1000 watt is 302 part 2 sec 6 2009, wheatstone bridge, ameter 0 to 5 amp is 1248 part 2 2003, voltmeter 0 to1 volt is 1248 part 2 2003, voltmeter 0 to 4 volt is 1248 part 2 2003, voltmeter 0 to 5 volt is 1248 part 2 2003, voltmeter 0 to 25 volt is 1248 part 2 2003, milivoltmeter 0 to 5 m volt is 1248 part 2 2003, fire buckets with stand is 2546 1974, multi angle magnetic clamp set metal base 18 x10 x 10 cm, power saw machine blade size 450 mm, burettes 25ml boroflow is 1997 2008, funnels dia 7 point 5 cms is 1541 2006, watch glass 3inch dia, glass test tubes 15 ml is 2618 2006, round bottom distillation flask with side neck is 2620 1963, connecting screw driver 10 x 100 mm is 844, rheostat 500 ohm is 9051 1979, resistance box 0 to 500 ohms, dc or ac ammeter 0 to 1000 ma is 1248 part 2 2003, dc or ac ammeter 0 to 1000 micro a is 1248 part 2 2003, rods with screw at one end for electrochemical equivalent carbon, rods with screw at one end for electrochemical equivalent copper, stands with clamps for burettes, first aid box is 13115 1991, swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch, cutter pipe miniature for copper tube 3 to 16 mm dia set, blower hand portable complete 1by10hp, digital thermometer graduated disc analogy type, instrumentation screw driver set 100mm, hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs is 10617 2018, extractors screw or stud sizes 1 to 8 set, universal scribing block 220or225or250 mm pillar, blocks vee 150 x 100 x 100 mm is 2949 1992, drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm is 5101, taps and dies complete set 5 6 8 10 and 12 mm set of 5, file knife edge smooth 15o mm is 1931 2000, file feather edge smooth 150 mm is 1931 2000, file flat 2nd cut 300 mm safe edge is 1931 2000, file swiss or needle or instrument set of 12 nos 150 mm is 1931 2000, file hand 2nd cut 150 mm is 1931 2000, card file or steel wire brush 3inch x 5 inch, clamp or vice tool maker 5 cm and 7 point 5 cm set of 2, c clamp 200 mm is 9181 1988, scraper flat 12 mm x 150 mm is 6861 1973, scraper 3 corner 15 cm is 6861 1973, scraper half round 15 cm is 6861 1973, chisel cold 9 mm round noze 100 mm is 402 1990, pipe die with die stock 3 by 4 inch, fire bucketor sand bucket is 2546 1974, wing campass 300mm is 3208 1989, knurling tool like diamond straight and diagonal, boring bar indexable with insert 1inch shank is 14864, lapping plate 6inch dia is 2285 2003, mallet dia 100 mm x 150 mm is 5675 1987, hammer flat head with handle is 841 1983, hammer planishing with handle is 841 1983, snip bent 250 mm is 6015 1989, gauge snap go and no go 25 to 50 mm by 5 mm is 3477, telescopic gauge range 8 to150 mm set of 6 pcs is 13197 1991, surface roughness comparison plates n1 to n12 grades, carbide wear block 1 mm to 2 mm is 2984 2003, dumpy level is 4590 1980
Agency / Dept :
department of employment and training DET
Due Date :
Oct 06, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial

For business owners, local dealers, and service agencies who want to dominate their local market and build a strong regional presence, tracking government tenders for Variable Frequency Source inside Gandevi is the absolute best business strategy. The local municipal corporation, smart city development boards, nearby public utility offices, and city-based government institutions consistently require different types of Variable Frequency Source items, supply cycles, or maintenance services to support their daily operations. These hyper-local city contracts are highly beneficial for small businesses, MSMEs, and local traders because you can manage the entire execution, product delivery, and on-ground service support right within Gandevi limits. This eliminates the headache of managing long-distance logistics, reduces extra outstation staff costs, and allows you to offer highly competitive pricing to local government buyers.

Our hyper-local information filtering network removes all the outside state noise and brings you the exact, highly relevant procurement alerts for Variable Frequency Source within the borders of Gandevi. We do not just track big contracts; our team actively indexes small ward-level quotations, urgent short-term purchase orders, and institutional supply notices that large national companies usually overlook. You will receive new, verified tender alerts daily directly on your WhatsApp and Email account as soon as a local department opens a bid. With your personal Tender18 dashboard login access, you can seamlessly search, sort, and filter local entries by issuing civic bodies or project values, and download all relevant tender documents, quotation forms, and specification sheets instantly to your screen.

Civic departments and local bodies operating inside Gandevi frequently prefer working with regional vendors who can guarantee rapid on-ground deployment and provide quick after-sales maintenance support. Our professional bidding team helps you highlight these local operational advantages perfectly in your technical application. We handle your complete online vendor registration with the city's specific municipal or development portal, execute the technical document submission with absolute precision, configure the necessary Class-3 DSC (Digital Signature Certificate) software and device settings on your system, and complete the final price bid submission securely. We make sure your paperwork is 100% compliant with the unique local evaluation rules of the city buyers.

Tender18 helps your business find, analyze, and win lucrative contracts right in your neighborhood. We handle the entire discovery process by sending you automated daily alerts on WhatsApp and Email, providing advanced dashboard login access to filter city-level bids, and offering direct tender document downloads for all Variable Frequency Source requirements inside Gandevi. When you are ready to apply, our technical bidding desk takes care of the hard work—managing your online vendor registration, completing an error-free technical document submission, setting up your Class-3 DSC encryption keys, and executing the final price bid submission successfully. We ensure your local business gets the best technical support to win local municipal and institutional orders easily.

1.

What specific local government bodies are covered for Variable Frequency Source tenders in Gandevi?

Tender18 aggregates procurement data from all major local authorities within the region, including the Gandevi Municipal Corporation, local Smart City initiative boards, zonal administrative offices, city transport services, and urban development authorities.

2.

Why should a business prioritize Gandevi-specific Variable Frequency Source tenders over statewide listings?

Focusing on Gandevi-level bids gives you a strong geographical advantage. It allows for better logistical planning, drastically reduces transportation or mobilization costs, and enables faster service response times—qualities that local government buyers value highly.

3.

What types of contracts are typically available for Variable Frequency Source in the Gandevi region?

Procurement notices in Gandevi generally range from on-site execution and localized installation projects to regular product supply cycles, Annual Rate Contracts (ARC), and daily maintenance or service management bids.

4.

Are there niche or low-budget Variable Frequency Source tenders in Gandevi suitable for small businesses?

Yes, absolutely. City-level procurement frequently features smaller-value quotations, localized ward-level bids, and direct purchase orders. Tender18 categorizes these low-budget opportunities separately so that MSMEs and startups can target quick-win contracts.

5.

Is it compulsory to have a physical office or warehouse in Gandevi to bid?

It depends on the tender type. While pure supply tenders usually only require an authorized service center network, service or maintenance-based Variable Frequency Source tenders often award extra weightage during technical evaluation to bidders with a local operational base in Gandevi. Tender18 explicitly flags these location-based clauses for you.

6.

How does targeting Gandevi-specific tenders help reduce market competition?

National and large statewide players often overlook smaller, localized municipal bids because of the smaller project scope. By focusing on Gandevi limits, you compete against a much smaller pool of regional vendors, significantly increasing your chances of winning.

7.

Can Tender18 alert me about Smart City infrastructure projects involving Variable Frequency Source in Gandevi?

Yes. Our platform closely monitors urban transformation and Smart City development initiatives within Gandevi. You will receive early alerts whenever these specialized, high-priority projects issue procurement notices for Variable Frequency Source.

8.

Who are the ideal candidates to apply for these localized Gandevi procurement opportunities?

These listings are perfectly curated for:

  • Local distributors and suppliers with stock points in or near Gandevi
  • City-based contractors capable of rapid deployment across municipal zones
  • Maintenance and facility agencies offering prompt support
  • Regional MSMEs looking to scale their local portfolio
9.

How do I track Annual Rate Contracts (ARC) for Variable Frequency Source inside Gandevi departments?

Tender18 features a dedicated filter for long-term rate contracts. Our system tracks and highlights fixed-period rate contracts floated by Gandevi civic bodies, giving your business a steady, predictable revenue stream if you win the bid.

10.

How does Tender18 help local businesses verify their paperwork for Gandevi municipal bids?

Municipal corporations often have rigid, localized document requirements. Tender18’s expert team conducts complete pre-bid compliance checks, verifying that your structural paperwork, financial credentials, and local certificates perfectly align with the specific criteria of the Gandevi buyer.

11.

Can I filter Variable Frequency Source tenders by specific municipal wards or zones within Gandevi?

Yes, our advanced search matrix allows you to drill down your search. You can filter active Variable Frequency Source opportunities by specific administrative wards, industrial zones, or surrounding sub-limits of Gandevi to perfectly match your team's operational radius.

12.

How do I get immediate alerts when a new Variable Frequency Source project opens in Gandevi?

You can easily set a hyper-localized "City + Keyword" tracking rule on Tender18.com or call our consultants at 7069661818. Once activated, you will receive an instant automated notification via WhatsApp and Email the very minute a matching tender goes live.

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All